dotfiles/zsh/.oh-my-zsh/tools/upgrade.sh
2024-06-19 00:06:56 +02:00

295 lines
8.9 KiB
Bash
Executable file

#!/usr/bin/env zsh
set +u # disable nounset
local ret=0 # exit code
# Protect against running with shells other than zsh
if [ -z "$ZSH_VERSION" ]; then
exec zsh "$0" "$@"
fi
# Protect against unwanted sourcing
case "$ZSH_EVAL_CONTEXT" in
*:file) echo "error: this file should not be sourced" && return 1 ;;
esac
# Define "$ZSH" if not defined -- in theory this should be `export`ed by the calling script
if [[ -z "$ZSH" ]]; then
ZSH="${0:a:h:h}"
fi
cd "$ZSH"
verbose_mode="default"
interactive=false
while getopts "v:i" opt; do
case $opt in
v)
if [[ $OPTARG == default || $OPTARG == minimal || $OPTARG == silent ]]; then
verbose_mode=$OPTARG
else
echo "[oh-my-zsh] update verbosity '$OPTARG' is not valid"
echo "[oh-my-zsh] valid options are 'default', 'minimal' and 'silent'"
fi
;;
i) interactive=true ;;
esac
done
# Use colors, but only if connected to a terminal
# and that terminal supports them.
# The [ -t 1 ] check only works when the function is not called from
# a subshell (like in `$(...)` or `(...)`, so this hack redefines the
# function at the top level to always return false when stdout is not
# a tty.
if [ -t 1 ]; then
is_tty() {
true
}
else
is_tty() {
false
}
fi
# This function uses the logic from supports-hyperlinks[1][2], which is
# made by Kat Marchán (@zkat) and licensed under the Apache License 2.0.
# [1] https://github.com/zkat/supports-hyperlinks
# [2] https://crates.io/crates/supports-hyperlinks
#
# Copyright (c) 2021 Kat Marchán
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
supports_hyperlinks() {
# $FORCE_HYPERLINK must be set and be non-zero (this acts as a logic bypass)
if [ -n "$FORCE_HYPERLINK" ]; then
[ "$FORCE_HYPERLINK" != 0 ]
return $?
fi
# If stdout is not a tty, it doesn't support hyperlinks
is_tty || return 1
# DomTerm terminal emulator (domterm.org)
if [ -n "$DOMTERM" ]; then
return 0
fi
# VTE-based terminals above v0.50 (Gnome Terminal, Guake, ROXTerm, etc)
if [ -n "$VTE_VERSION" ]; then
[ $VTE_VERSION -ge 5000 ]
return $?
fi
# If $TERM_PROGRAM is set, these terminals support hyperlinks
case "$TERM_PROGRAM" in
Hyper|iTerm.app|terminology|WezTerm|vscode) return 0 ;;
esac
# These termcap entries support hyperlinks
case "$TERM" in
xterm-kitty|alacritty|alacritty-direct) return 0 ;;
esac
# xfce4-terminal supports hyperlinks
if [ "$COLORTERM" = "xfce4-terminal" ]; then
return 0
fi
# Windows Terminal also supports hyperlinks
if [ -n "$WT_SESSION" ]; then
return 0
fi
# Konsole supports hyperlinks, but it's an opt-in setting that can't be detected
# https://github.com/ohmyzsh/ohmyzsh/issues/10964
# if [ -n "$KONSOLE_VERSION" ]; then
# return 0
# fi
return 1
}
# Adapted from code and information by Anton Kochkov (@XVilka)
# Source: https://gist.github.com/XVilka/8346728
supports_truecolor() {
case "$COLORTERM" in
truecolor|24bit) return 0 ;;
esac
case "$TERM" in
iterm |\
tmux-truecolor |\
linux-truecolor |\
xterm-truecolor |\
screen-truecolor) return 0 ;;
esac
return 1
}
fmt_link() {
# $1: text, $2: url, $3: fallback mode
if supports_hyperlinks; then
printf '\033]8;;%s\033\\%s\033]8;;\033\\\n' "$2" "$1"
return
fi
case "$3" in
--text) printf '%s\n' "$1" ;;
--url|*) fmt_underline "$2" ;;
esac
}
fmt_underline() {
is_tty && printf '\033[4m%s\033[24m\n' "$*" || printf '%s\n' "$*"
}
setopt typeset_silent
typeset -a RAINBOW
if is_tty; then
if supports_truecolor; then
RAINBOW=(
"$(printf '\033[38;2;255;0;0m')"
"$(printf '\033[38;2;255;97;0m')"
"$(printf '\033[38;2;247;255;0m')"
"$(printf '\033[38;2;0;255;30m')"
"$(printf '\033[38;2;77;0;255m')"
"$(printf '\033[38;2;168;0;255m')"
"$(printf '\033[38;2;245;0;172m')"
)
else
RAINBOW=(
"$(printf '\033[38;5;196m')"
"$(printf '\033[38;5;202m')"
"$(printf '\033[38;5;226m')"
"$(printf '\033[38;5;082m')"
"$(printf '\033[38;5;021m')"
"$(printf '\033[38;5;093m')"
"$(printf '\033[38;5;163m')"
)
fi
RED=$(printf '\033[31m')
GREEN=$(printf '\033[32m')
YELLOW=$(printf '\033[33m')
BLUE=$(printf '\033[34m')
BOLD=$(printf '\033[1m')
RESET=$(printf '\033[0m')
fi
# Update upstream remote to ohmyzsh org
git remote -v | while read remote url extra; do
case "$url" in
git://github.com/robbyrussell/oh-my-zsh(|.git))
# Update out-of-date "unauthenticated git protocol on port 9418" to https
git remote set-url "$remote" "https://github.com/ohmyzsh/ohmyzsh.git" ;;
https://github.com/robbyrussell/oh-my-zsh(|.git))
git remote set-url "$remote" "https://github.com/ohmyzsh/ohmyzsh.git" ;;
git@github.com:robbyrussell/oh-my-zsh(|.git))
git remote set-url "$remote" "git@github.com:ohmyzsh/ohmyzsh.git" ;;
https://github.com/ohmyzsh/ohmyzsh(|.git)) ;;
git@github.com:ohmyzsh/ohmyzsh(|.git)) ;;
*) continue ;;
esac
# If we reach this point we have found the proper ohmyzsh upstream remote. If we don't,
# we'll only update from the set remote if `oh-my-zsh.remote` has been set to a remote,
# as when installing from a fork.
git config --local oh-my-zsh.remote "$remote"
break
done
# Set git-config values known to fix git errors
# Line endings (#4069)
git config core.eol lf
git config core.autocrlf false
# zeroPaddedFilemode fsck errors (#4963)
git config fsck.zeroPaddedFilemode ignore
git config fetch.fsck.zeroPaddedFilemode ignore
git config receive.fsck.zeroPaddedFilemode ignore
# autostash on rebase (#7172)
resetAutoStash=$(git config --bool rebase.autoStash 2>/dev/null)
git config rebase.autoStash true
local ret=0
# repository settings
remote=${"$(git config --local oh-my-zsh.remote)":-origin}
branch=${"$(git config --local oh-my-zsh.branch)":-master}
# repository state
last_head=$(git symbolic-ref --quiet --short HEAD || git rev-parse HEAD)
# checkout update branch
git checkout -q "$branch" -- || exit 1
# branch commit before update (used in changelog)
last_commit=$(git rev-parse "$branch")
# Update Oh My Zsh
if [[ $verbose_mode != silent ]]; then
printf "${BLUE}%s${RESET}\n" "Updating Oh My Zsh"
fi
if LANG= git pull --quiet --rebase $remote $branch; then
# Check if it was really updated or not
if [[ "$(git rev-parse HEAD)" = "$last_commit" ]]; then
message="Oh My Zsh is already at the latest version."
else
message="Hooray! Oh My Zsh has been updated!"
# Save the commit prior to updating
git config oh-my-zsh.lastVersion "$last_commit"
# Print changelog to the terminal
if [[ $interactive == true && $verbose_mode == default ]]; then
"$ZSH/tools/changelog.sh" HEAD "$last_commit"
fi
if [[ $verbose_mode != silent ]]; then
printf "${BLUE}%s \`${BOLD}%s${RESET}${BLUE}\`${RESET}\n" "You can see the changelog with" "omz changelog"
fi
fi
if [[ $verbose_mode == default ]]; then
printf '%s %s__ %s %s %s %s %s__ %s\n' $RAINBOW $RESET
printf '%s ____ %s/ /_ %s ____ ___ %s__ __ %s ____ %s_____%s/ /_ %s\n' $RAINBOW $RESET
printf '%s / __ \\%s/ __ \\ %s / __ `__ \\%s/ / / / %s /_ / %s/ ___/%s __ \\ %s\n' $RAINBOW $RESET
printf '%s/ /_/ /%s / / / %s / / / / / /%s /_/ / %s / /_%s(__ )%s / / / %s\n' $RAINBOW $RESET
printf '%s\\____/%s_/ /_/ %s /_/ /_/ /_/%s\\__, / %s /___/%s____/%s_/ /_/ %s\n' $RAINBOW $RESET
printf '%s %s %s %s /____/ %s %s %s %s\n' $RAINBOW $RESET
printf '\n'
printf "${BLUE}%s${RESET}\n\n" "$message"
printf "${BLUE}${BOLD}%s %s${RESET}\n" "To keep up with the latest news and updates, follow us on Twitter:" "$(fmt_link @ohmyzsh https://twitter.com/ohmyzsh)"
printf "${BLUE}${BOLD}%s %s${RESET}\n" "Want to get involved in the community? Join our Discord:" "$(fmt_link "Discord server" https://discord.gg/ohmyzsh)"
printf "${BLUE}${BOLD}%s %s${RESET}\n" "Get your Oh My Zsh swag at:" "$(fmt_link "Planet Argon Shop" https://shop.planetargon.com/collections/oh-my-zsh)"
elif [[ $verbose_mode == minimal ]]; then
printf "${BLUE}%s${RESET}\n" "$message"
fi
else
ret=$?
printf "${RED}%s${RESET}\n" 'There was an error updating. Try again later?'
fi
# go back to HEAD previous to update
git checkout -q "$last_head" --
# Unset git-config values set just for the upgrade
case "$resetAutoStash" in
"") git config --unset rebase.autoStash ;;
*) git config rebase.autoStash "$resetAutoStash" ;;
esac
# Exit with `1` if the update failed
exit $ret