Marlin-Artillery-M600/Marlin/example_configurations/AliExpress/CL-260/README.txt

This is an example configuration for the CL-260 Ultimaker 2 clone.
Change Z_MAX_POS to 300 for the CL-260MAX.

(The printer is available on AliExpress; be aware that this is not a beginner's
printer -- it needs tweaking and some parts replaced before being decent.)

The printer comes with a quite old Marlin, the sources are available here:
http://www.thingiverse.com/thing:1635830/ and I recommend replacing them.

The setting "works" for my printer and the extruder using my calibration value.
You might want to tweak some settings, e.g enable EEPROM, increase default Z speed, adjust homing speeds,...

Have fun!
--
tobi
Arrange example configurations by vendor 2017-07-07 11:03:27 +02:00			`This is an example configuration for the CL-260 Ultimaker 2 clone.`
CL-260 configs 2017-06-12 02:34:16 +02:00			`Change Z_MAX_POS to 300 for the CL-260MAX.`

			`(The printer is available on AliExpress; be aware that this is not a beginner's`
			`printer -- it needs tweaking and some parts replaced before being decent.)`

			`The printer comes with a quite old Marlin, the sources are available here:`
			`http://www.thingiverse.com/thing:1635830/ and I recommend replacing them.`

			`The setting "works" for my printer and the extruder using my calibration value.`
			`You might want to tweak some settings, e.g enable EEPROM, increase default Z speed, adjust homing speeds,...`

			`Have fun!`
			`--`
			`tobi`