This repository has been archived on 2022-01-28. You can view files and clone it, but cannot push or open issues or pull requests.
Marlin-Artillery-M600/Marlin/src/inc/Conditionals_LCD.h

583 lines
16 KiB
C
Raw Normal View History

/**
* Marlin 3D Printer Firmware
2020-02-03 15:00:57 +01:00
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
2019-06-28 06:57:50 +02:00
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
2018-11-03 08:13:10 +01:00
#pragma once
/**
* Conditionals_LCD.h
* Conditionals that need to be set before Configuration_adv.h or pins.h
*/
#if ENABLED(CARTESIO_UI)
2017-06-24 20:56:07 +02:00
#define DOGLCD
2019-07-14 16:19:29 +02:00
#define IS_ULTIPANEL
#elif ENABLED(ZONESTAR_LCD)
2017-06-10 07:12:18 +02:00
#define ADC_KEYPAD
2019-07-14 16:19:29 +02:00
#define IS_RRW_KEYPAD
#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0
#define ADC_KEY_NUM 8
2019-07-14 16:19:29 +02:00
#define IS_ULTIPANEL
2017-06-10 07:12:18 +02:00
// This helps to implement ADC_KEYPAD menus
#define REVERSE_MENU_DIRECTION
#define ENCODER_PULSES_PER_STEP 1
#define ENCODER_STEPS_PER_MENU_ITEM 1
2017-11-05 03:22:53 +01:00
#define ENCODER_FEEDRATE_DEADZONE 2
2017-06-24 20:56:07 +02:00
2018-01-05 17:10:55 +01:00
#elif ENABLED(RADDS_DISPLAY)
2019-07-14 16:19:29 +02:00
#define IS_ULTIPANEL
#define ENCODER_PULSES_PER_STEP 2
2019-07-14 16:19:29 +02:00
#elif EITHER(ANET_FULL_GRAPHICS_LCD, BQ_LCD_SMART_CONTROLLER)
2017-06-24 20:56:07 +02:00
2019-07-14 16:19:29 +02:00
#define IS_RRD_FG_SC
#elif ANY(miniVIKI, VIKI2, ELB_FULL_GRAPHIC_CONTROLLER, AZSMZ_12864)
2017-06-24 20:56:07 +02:00
2019-07-14 16:19:29 +02:00
#define IS_ULTRA_LCD
2019-03-11 11:07:14 +01:00
#define DOGLCD
2019-07-14 16:19:29 +02:00
#define IS_ULTIPANEL
2017-06-24 20:56:07 +02:00
#if ENABLED(miniVIKI)
#define U8GLIB_ST7565_64128N
#elif ENABLED(VIKI2)
#define U8GLIB_ST7565_64128N
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
#define U8GLIB_LM6059_AF
#define SD_DETECT_INVERTED
#elif ENABLED(AZSMZ_12864)
#define U8GLIB_ST7565_64128N
#endif
2017-06-24 20:56:07 +02:00
#elif ENABLED(OLED_PANEL_TINYBOY2)
2017-06-24 20:56:07 +02:00
2019-07-14 16:19:29 +02:00
#define IS_U8GLIB_SSD1306
#define IS_ULTIPANEL
2017-06-24 20:56:07 +02:00
#elif ENABLED(RA_CONTROL_PANEL)
2017-10-09 22:58:02 +02:00
#define LCD_I2C_TYPE_PCA8574
#define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander
2019-07-14 16:19:29 +02:00
#define IS_ULTIPANEL
2017-10-09 22:58:02 +02:00
#elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
2017-10-09 22:58:02 +02:00
#define DOGLCD
#define U8GLIB_ST7920
2019-07-14 16:19:29 +02:00
#define IS_ULTIPANEL
2017-10-09 22:58:02 +02:00
#elif ENABLED(CR10_STOCKDISPLAY)
2017-10-09 22:58:02 +02:00
2019-07-14 16:19:29 +02:00
#define IS_RRD_FG_SC
#ifndef ST7920_DELAY_1
#define ST7920_DELAY_1 DELAY_NS(125)
2017-10-09 22:58:02 +02:00
#endif
#ifndef ST7920_DELAY_2
#define ST7920_DELAY_2 DELAY_NS(125)
#endif
#ifndef ST7920_DELAY_3
#define ST7920_DELAY_3 DELAY_NS(125)
#endif
#elif ENABLED(MKS_12864OLED)
2017-10-09 22:58:02 +02:00
2019-07-14 16:19:29 +02:00
#define IS_RRD_SC
#define U8GLIB_SH1106
2017-10-09 22:58:02 +02:00
#elif ENABLED(MKS_12864OLED_SSD1306)
2019-07-14 16:19:29 +02:00
#define IS_RRD_SC
#define IS_U8GLIB_SSD1306
#elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
2017-10-09 22:58:02 +02:00
#define MINIPANEL
2017-10-09 22:58:02 +02:00
2020-01-17 20:16:05 +01:00
#elif ANY(FYSETC_MINI_12864_X_X, FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1, FYSETC_GENERIC_12864_1_1)
#define FYSETC_MINI_12864
#define DOGLCD
2019-07-14 16:19:29 +02:00
#define IS_ULTIPANEL
#define LED_COLORS_REDUCE_GREEN
2019-10-22 22:43:37 +02:00
#if ENABLED(PSU_CONTROL) && EITHER(FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1)
2019-06-13 04:59:39 +02:00
#define LED_BACKLIGHT_TIMEOUT 10000
#endif
// Require LED backlighting enabled
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#define RGB_LED
#elif ENABLED(FYSETC_MINI_12864_2_1)
#define LED_CONTROL_MENU
#define NEOPIXEL_LED
#undef NEOPIXEL_TYPE
#define NEOPIXEL_TYPE NEO_RGB
#if NEOPIXEL_PIXELS < 3
#undef NEOPIXELS_PIXELS
#define NEOPIXEL_PIXELS 3
#endif
#ifndef NEOPIXEL_BRIGHTNESS
#define NEOPIXEL_BRIGHTNESS 127
#endif
//#define NEOPIXEL_STARTUP_TEST
#endif
2019-07-14 16:19:29 +02:00
#elif ENABLED(ULTI_CONTROLLER)
#define IS_ULTIPANEL
2019-07-14 16:19:29 +02:00
#define U8GLIB_SSD1309
#define LCD_RESET_PIN LCD_PINS_D6 // This controller need a reset pin
#define ENCODER_PULSES_PER_STEP 2
#define ENCODER_STEPS_PER_MENU_ITEM 2
#elif ENABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602)
#define IS_RRD_SC
#define LCD_WIDTH 16
#define LCD_HEIGHT 2
#endif
#if ENABLED(IS_RRD_FG_SC)
#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
#endif
#if EITHER(MAKRPANEL, MINIPANEL)
2019-07-14 16:19:29 +02:00
#define IS_ULTIPANEL
#define DOGLCD
2019-07-14 16:19:29 +02:00
#if ENABLED(MAKRPANEL)
#define U8GLIB_ST7565_64128N
#endif
#endif
2019-07-14 16:19:29 +02:00
#if ENABLED(IS_U8GLIB_SSD1306)
#define U8GLIB_SSD1306
#endif
#if ENABLED(OVERLORD_OLED)
#define IS_ULTIPANEL
#define U8GLIB_SH1106
/**
* PCA9632 for buzzer and LEDs via i2c
* No auto-inc, red and green leds switched, buzzer
*/
#define PCA9632
#define PCA9632_NO_AUTO_INC
#define PCA9632_GRN 0x00
#define PCA9632_RED 0x02
#define PCA9632_BUZZER
#define PCA9632_BUZZER_DATA { 0x09, 0x02 }
#define ENCODER_PULSES_PER_STEP 1 // Overlord uses buttons
#define ENCODER_STEPS_PER_MENU_ITEM 1
#endif
// 128x64 I2C OLED LCDs - SSD1306/SSD1309/SH1106
#define HAS_SSD1306_OLED_I2C ANY(U8GLIB_SSD1306, U8GLIB_SSD1309, U8GLIB_SH1106)
#if HAS_SSD1306_OLED_I2C
2019-07-14 16:19:29 +02:00
#define IS_ULTRA_LCD
#define DOGLCD
#endif
// ST7920-based graphical displays
#if ANY(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER, LCD_FOR_MELZI, SILVER_GATE_GLCD_CONTROLLER)
#define DOGLCD
#define U8GLIB_ST7920
2019-07-14 16:19:29 +02:00
#define IS_RRD_SC
#endif
2017-06-24 20:56:07 +02:00
// RepRapDiscount LCD or Graphical LCD with rotary click encoder
2019-07-14 16:19:29 +02:00
#if ENABLED(IS_RRD_SC)
#define REPRAP_DISCOUNT_SMART_CONTROLLER
#endif
2017-06-24 20:56:07 +02:00
/**
* SPI Ultipanels
*/
// Basic Ultipanel-like displays
#if ANY(ULTIMAKERCONTROLLER, REPRAP_DISCOUNT_SMART_CONTROLLER, G3D_PANEL, RIGIDBOT_PANEL, PANEL_ONE, U8GLIB_SH1106)
2019-07-14 16:19:29 +02:00
#define IS_ULTIPANEL
#endif
// Einstart OLED has Cardinal nav via pins defined in pins_EINSTART-S.h
#if ENABLED(U8GLIB_SH1106_EINSTART)
#define DOGLCD
#define IS_ULTIPANEL
#endif
// FSMC/SPI TFT Panels
#if ENABLED(FSMC_GRAPHICAL_TFT)
#define DOGLCD
#define IS_ULTIPANEL
#define DELAYED_BACKLIGHT_INIT
#endif
/**
* I2C Panels
*/
2017-06-24 20:56:07 +02:00
#if EITHER(LCD_SAINSMART_I2C_1602, LCD_SAINSMART_I2C_2004)
#define LCD_I2C_TYPE_PCF8575
#define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander
#if ENABLED(LCD_SAINSMART_I2C_2004)
#define LCD_WIDTH 20
#define LCD_HEIGHT 4
#endif
#elif ENABLED(LCD_I2C_PANELOLU2)
// PANELOLU2 LCD with status LEDs, separate encoder and click inputs
#define LCD_I2C_TYPE_MCP23017
#define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
#define LCD_USE_I2C_BUZZER // Enable buzzer on LCD (optional)
2019-07-14 16:19:29 +02:00
#define IS_ULTIPANEL
#elif ENABLED(LCD_I2C_VIKI)
/**
* Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs
*
* This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 )
* Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory.
* Note: The pause/stop/resume LCD button pin should be connected to the Arduino
* BTN_ENC pin (or set BTN_ENC to -1 if not used)
*/
#define LCD_I2C_TYPE_MCP23017
#define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
#define LCD_USE_I2C_BUZZER // Enable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later)
2019-07-14 16:19:29 +02:00
#define IS_ULTIPANEL
#define ENCODER_FEEDRATE_DEADZONE 4
#define STD_ENCODER_PULSES_PER_STEP 1
#define STD_ENCODER_STEPS_PER_MENU_ITEM 2
#elif ENABLED(G3D_PANEL)
#define STD_ENCODER_PULSES_PER_STEP 2
#define STD_ENCODER_STEPS_PER_MENU_ITEM 1
2019-07-14 16:19:29 +02:00
#elif ANY(REPRAP_DISCOUNT_SMART_CONTROLLER, miniVIKI, VIKI2, ELB_FULL_GRAPHIC_CONTROLLER, AZSMZ_12864, OLED_PANEL_TINYBOY2, BQ_LCD_SMART_CONTROLLER, LCD_I2C_PANELOLU2)
#define STD_ENCODER_PULSES_PER_STEP 4
#define STD_ENCODER_STEPS_PER_MENU_ITEM 1
#endif
#ifndef STD_ENCODER_PULSES_PER_STEP
#if ENABLED(TOUCH_BUTTONS)
#define STD_ENCODER_PULSES_PER_STEP 2
#else
#define STD_ENCODER_PULSES_PER_STEP 5
#endif
#endif
#ifndef STD_ENCODER_STEPS_PER_MENU_ITEM
#define STD_ENCODER_STEPS_PER_MENU_ITEM 1
#endif
#ifndef ENCODER_PULSES_PER_STEP
#define ENCODER_PULSES_PER_STEP STD_ENCODER_PULSES_PER_STEP
#endif
#ifndef ENCODER_STEPS_PER_MENU_ITEM
#define ENCODER_STEPS_PER_MENU_ITEM STD_ENCODER_STEPS_PER_MENU_ITEM
#endif
#ifndef ENCODER_FEEDRATE_DEADZONE
#define ENCODER_FEEDRATE_DEADZONE 6
#endif
// Shift register panels
// ---------------------
// 2 wire Non-latching LCD SR from:
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
#if ENABLED(FF_INTERFACEBOARD)
#define SR_LCD_3W_NL // Non latching 3 wire shift register
2019-07-14 16:19:29 +02:00
#define IS_ULTIPANEL
#elif ENABLED(SAV_3DLCD)
#define SR_LCD_2W_NL // Non latching 2 wire shift register
#define IS_ULTIPANEL
#endif
2019-07-14 16:19:29 +02:00
#if ENABLED(IS_ULTIPANEL)
#define ULTIPANEL
#endif
#if ENABLED(ULTIPANEL)
2019-07-14 16:19:29 +02:00
#define IS_ULTRA_LCD
#ifndef NEWPANEL
#define NEWPANEL
#endif
#endif
#if ENABLED(IS_ULTRA_LCD)
#define ULTRA_LCD
#endif
2019-07-14 16:19:29 +02:00
#if ENABLED(IS_RRW_KEYPAD)
#define REPRAPWORLD_KEYPAD
#endif
// Keypad needs a move step
#if ENABLED(REPRAPWORLD_KEYPAD)
#define NEWPANEL
#ifndef REPRAPWORLD_KEYPAD_MOVE_STEP
#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0
#endif
#endif
2019-05-08 03:32:50 +02:00
// Extensible UI serial touch screens. (See src/lcd/extensible_ui)
2019-11-23 23:53:44 +01:00
#if ANY(MALYAN_LCD, DGUS_LCD, TOUCH_UI_FTDI_EVE)
2019-07-14 16:19:29 +02:00
#define IS_EXTUI
2019-05-08 03:32:50 +02:00
#define EXTENSIBLE_UI
#endif
2018-10-23 23:00:34 +02:00
// Aliases for LCD features
#define HAS_SPI_LCD ENABLED(ULTRA_LCD)
2019-05-08 03:32:50 +02:00
#define HAS_DISPLAY (HAS_SPI_LCD || ENABLED(EXTENSIBLE_UI))
#define HAS_GRAPHICAL_LCD ENABLED(DOGLCD)
#define HAS_CHARACTER_LCD (HAS_SPI_LCD && !HAS_GRAPHICAL_LCD)
#define HAS_LCD_MENU (ENABLED(ULTIPANEL) && DISABLED(NO_LCD_MENUS))
2019-07-14 16:19:29 +02:00
#define HAS_ADC_BUTTONS ENABLED(ADC_KEYPAD)
2020-01-04 04:00:44 +01:00
#define HAS_DGUS_LCD ANY(DGUS_LCD_UI_ORIGIN, DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
2018-11-21 04:39:30 +01:00
2020-02-23 04:36:12 +01:00
#if HAS_GRAPHICAL_LCD
#ifndef LCD_PIXEL_WIDTH
#define LCD_PIXEL_WIDTH 128
#endif
#ifndef LCD_PIXEL_HEIGHT
#define LCD_PIXEL_HEIGHT 64
#endif
#endif
/**
* Extruders have some combination of stepper motors and hotends
* so we separate these concepts into the defines:
*
* EXTRUDERS - Number of Selectable Tools
* HOTENDS - Number of hotends, whether connected or separate
* E_STEPPERS - Number of actual E stepper motors
* E_MANUAL - Number of E steppers for LCD move options
*
*/
2019-02-01 02:10:52 +01:00
#if EXTRUDERS == 0
#undef DISTINCT_E_FACTORS
#undef SINGLENOZZLE
#undef SWITCHING_EXTRUDER
#undef SWITCHING_NOZZLE
#undef MIXING_EXTRUDER
#undef MK2_MULTIPLEXER
#undef PRUSA_MMU2
#endif
2019-02-01 02:10:52 +01:00
#if ENABLED(SWITCHING_EXTRUDER) // One stepper for every two EXTRUDERS
#if EXTRUDERS > 4
#define E_STEPPERS 3
#elif EXTRUDERS > 2
#define E_STEPPERS 2
2017-09-06 13:28:32 +02:00
#else
#define E_STEPPERS 1
2017-09-06 13:28:32 +02:00
#endif
#if DISABLED(SWITCHING_NOZZLE)
#define HOTENDS E_STEPPERS
#endif
#elif ENABLED(MIXING_EXTRUDER)
#define E_STEPPERS MIXING_STEPPERS
#define E_MANUAL 1
#define DUAL_MIXING_EXTRUDER (MIXING_STEPPERS == 2)
2018-09-08 08:43:24 +02:00
#elif ENABLED(SWITCHING_TOOLHEAD)
#define E_STEPPERS EXTRUDERS
#define E_MANUAL EXTRUDERS
2019-02-01 02:10:52 +01:00
#elif ENABLED(PRUSA_MMU2)
#define E_STEPPERS 1
#endif
2017-09-06 13:28:32 +02:00
// No inactive extruders with MK2_MULTIPLEXER or SWITCHING_NOZZLE
#if EITHER(MK2_MULTIPLEXER, SWITCHING_NOZZLE)
#undef DISABLE_INACTIVE_EXTRUDER
#endif
2019-02-01 02:10:52 +01:00
// Prusa MK2 Multiplexer and MMU 2.0 force SINGLENOZZLE
#if EITHER(MK2_MULTIPLEXER, PRUSA_MMU2)
#define SINGLENOZZLE
#endif
#if EITHER(SINGLENOZZLE, MIXING_EXTRUDER) // One hotend, one thermistor, no XY offset
2018-05-28 00:56:21 +02:00
#undef HOTENDS
#define HOTENDS 1
#undef HOTEND_OFFSET_X
#undef HOTEND_OFFSET_Y
#endif
#ifndef HOTENDS
#define HOTENDS EXTRUDERS
#endif
2018-09-08 08:43:24 +02:00
#ifndef E_STEPPERS
#define E_STEPPERS EXTRUDERS
#endif
#ifndef E_MANUAL
#define E_MANUAL EXTRUDERS
#endif
#define HOTEND_LOOP() for (int8_t e = 0; e < HOTENDS; e++)
#define DO_SWITCH_EXTRUDER (ENABLED(SWITCHING_EXTRUDER) && (DISABLED(SWITCHING_NOZZLE) || SWITCHING_EXTRUDER_SERVO_NR != SWITCHING_NOZZLE_SERVO_NR))
#define SWITCHING_NOZZLE_TWO_SERVOS defined(SWITCHING_NOZZLE_E1_SERVO_NR)
2018-08-25 04:26:29 +02:00
#define HAS_HOTEND_OFFSET (HOTENDS > 1)
#define HAS_DUPLICATION_MODE EITHER(DUAL_X_CARRIAGE, MULTI_NOZZLE_DUPLICATION)
2018-08-25 04:26:29 +02:00
/**
* DISTINCT_E_FACTORS affects how some E factors are accessed
*/
#if ENABLED(DISTINCT_E_FACTORS) && E_STEPPERS > 1
#define XYZE_N (XYZ + E_STEPPERS)
#define E_AXIS_N(E) AxisEnum(E_AXIS + E)
#define UNUSED_E(E) NOOP
#else
#undef DISTINCT_E_FACTORS
#define XYZE_N XYZE
2019-01-31 03:55:05 +01:00
#define E_AXIS_N(E) E_AXIS
#define UNUSED_E(E) UNUSED(E)
#endif
/**
* The BLTouch Probe emulates a servo probe
* and uses "special" angles for its state.
*/
#if ENABLED(BLTOUCH)
2018-04-02 06:54:12 +02:00
#ifndef Z_PROBE_SERVO_NR
#define Z_PROBE_SERVO_NR 0
2016-12-04 05:02:27 +01:00
#endif
#ifndef NUM_SERVOS
2018-04-02 06:54:12 +02:00
#define NUM_SERVOS (Z_PROBE_SERVO_NR + 1)
#endif
#undef DEACTIVATE_SERVOS_AFTER_MOVE
#if NUM_SERVOS == 1
#undef SERVO_DELAY
#define SERVO_DELAY { 50 }
#endif
// Always disable probe pin inverting for BLTouch
#undef Z_MIN_PROBE_ENDSTOP_INVERTING
#define Z_MIN_PROBE_ENDSTOP_INVERTING false
#if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
#undef Z_MIN_ENDSTOP_INVERTING
2019-03-17 11:57:25 +01:00
#define Z_MIN_ENDSTOP_INVERTING false
#endif
#endif
2018-10-23 07:57:19 +02:00
#ifndef PREHEAT_1_LABEL
#define PREHEAT_1_LABEL "PLA"
#endif
#ifndef PREHEAT_2_LABEL
#define PREHEAT_2_LABEL "ABS"
2018-10-23 07:57:19 +02:00
#endif
/**
2020-02-11 16:05:45 +01:00
* Set a flag for a servo probe (or BLTouch)
*/
2018-04-02 06:54:12 +02:00
#define HAS_Z_SERVO_PROBE (defined(Z_PROBE_SERVO_NR) && Z_PROBE_SERVO_NR >= 0)
#define HAS_SERVO_ANGLES (HAS_Z_SERVO_PROBE || EITHER(SWITCHING_EXTRUDER, SWITCHING_NOZZLE))
#if !HAS_SERVO_ANGLES
#undef EDITABLE_SERVO_ANGLES
#endif
/**
2018-04-27 07:44:47 +02:00
* Set flags for enabled probes
*/
#define HAS_BED_PROBE (HAS_Z_SERVO_PROBE || ANY(FIX_MOUNTED_PROBE, NOZZLE_AS_PROBE, TOUCH_MI_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, SOLENOID_PROBE, SENSORLESS_PROBING, RACK_AND_PINION_PROBE))
#define PROBE_SELECTED (HAS_BED_PROBE || EITHER(PROBE_MANUALLY, MESH_BED_LEVELING))
2016-09-19 06:28:11 +02:00
#if HAS_BED_PROBE
#define HAS_PROBE_XY_OFFSET DISABLED(NOZZLE_AS_PROBE)
#define HAS_CUSTOM_PROBE_PIN DISABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
#define HOMING_Z_WITH_PROBE (Z_HOME_DIR < 0 && !HAS_CUSTOM_PROBE_PIN)
#ifndef Z_PROBE_LOW_POINT
#define Z_PROBE_LOW_POINT -5
#endif
#if ENABLED(Z_PROBE_ALLEN_KEY)
#define PROBE_TRIGGERED_WHEN_STOWED_TEST // Extra test for Allen Key Probe
#endif
#ifdef MULTIPLE_PROBING
#if EXTRA_PROBING
#define TOTAL_PROBING (MULTIPLE_PROBING + EXTRA_PROBING)
#else
#define TOTAL_PROBING MULTIPLE_PROBING
#endif
#endif
#else
2018-04-27 07:44:47 +02:00
// Clear probe pin settings when no probe is selected
#undef Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
#endif
2018-11-03 08:13:10 +01:00
#ifdef GRID_MAX_POINTS_X
#define GRID_MAX_POINTS ((GRID_MAX_POINTS_X) * (GRID_MAX_POINTS_Y))
#endif
2020-01-20 06:35:07 +01:00
#define HAS_EXTRA_ENDSTOPS ANY(X_DUAL_ENDSTOPS, Y_DUAL_ENDSTOPS, Z_MULTI_ENDSTOPS)
#define HAS_SOFTWARE_ENDSTOPS EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
#define HAS_RESUME_CONTINUE ANY(EXTENSIBLE_UI, NEWPANEL, EMERGENCY_PARSER)
#define HAS_COLOR_LEDS ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
#define HAS_LEDS_OFF_FLAG (BOTH(PRINTER_EVENT_LEDS, SDSUPPORT) && HAS_RESUME_CONTINUE)
#define HAS_PRINT_PROGRESS EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY)
#define HAS_PRINT_PROGRESS_PERMYRIAD (HAS_PRINT_PROGRESS && EITHER(PRINT_PROGRESS_SHOW_DECIMALS, SHOW_REMAINING_TIME))
#define HAS_SERVICE_INTERVALS (ENABLED(PRINTCOUNTER) && (SERVICE_INTERVAL_1 > 0 || SERVICE_INTERVAL_2 > 0 || SERVICE_INTERVAL_3 > 0))
#define HAS_FILAMENT_SENSOR ENABLED(FILAMENT_RUNOUT_SENSOR)
2017-03-16 23:20:24 +01:00
2019-04-04 10:06:19 +02:00
#define HAS_GAMES ANY(MARLIN_BRICKOUT, MARLIN_INVADERS, MARLIN_SNAKE, MARLIN_MAZE)
#define HAS_GAME_MENU (1 < ENABLED(MARLIN_BRICKOUT) + ENABLED(MARLIN_INVADERS) + ENABLED(MARLIN_SNAKE) + ENABLED(MARLIN_MAZE))
2019-07-03 09:43:33 +02:00
#define IS_SCARA ENABLED(MORGAN_SCARA)
2018-11-03 08:13:10 +01:00
#define IS_KINEMATIC (ENABLED(DELTA) || IS_SCARA)
#define IS_CARTESIAN !IS_KINEMATIC
2019-01-28 05:43:13 +01:00
#ifndef INVERT_X_DIR
#define INVERT_X_DIR false
#endif
#ifndef INVERT_Y_DIR
#define INVERT_Y_DIR false
#endif
#ifndef INVERT_Z_DIR
#define INVERT_Z_DIR false
#endif
#ifndef INVERT_E_DIR
#define INVERT_E_DIR false
#endif
2019-02-12 22:55:47 +01:00
#if ENABLED(SLIM_LCD_MENUS)
#define BOOT_MARLIN_LOGO_SMALL
#endif
#define IS_RE_ARM_BOARD MB(RAMPS_14_RE_ARM_EFB, RAMPS_14_RE_ARM_EEB, RAMPS_14_RE_ARM_EFF, RAMPS_14_RE_ARM_EEF, RAMPS_14_RE_ARM_SF)
2019-07-28 21:48:29 +02:00
#define HAS_LINEAR_E_JERK (DISABLED(CLASSIC_JERK) && ENABLED(LIN_ADVANCE))
#ifndef SPI_SPEED
#define SPI_SPEED SPI_FULL_SPEED
#endif