This repository has been archived on 2022-01-28. You can view files and clone it, but cannot push or open issues or pull requests.
Marlin-Artillery-M600/Marlin/SdFatStructs.h

647 lines
25 KiB
C
Raw Normal View History

2011-11-18 22:17:37 +01:00
/* Arduino SdFat Library
* Copyright (C) 2009 by William Greiman
*
* This file is part of the Arduino SdFat Library
*
* This Library is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This Library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with the Arduino SdFat Library. If not, see
* <http://www.gnu.org/licenses/>.
*/
#include "Marlin.h"
#ifdef SDSUPPORT
2011-11-18 22:17:37 +01:00
#ifndef SdFatStructs_h
#define SdFatStructs_h
2012-08-22 14:49:57 +02:00
#define PACKED __attribute__((__packed__))
2011-11-18 22:17:37 +01:00
/**
* \file
* \brief FAT file structures
*/
/*
* mostly from Microsoft document fatgen103.doc
* http://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx
*/
//------------------------------------------------------------------------------
/** Value for byte 510 of boot block or MBR */
uint8_t const BOOTSIG0 = 0X55;
/** Value for byte 511 of boot block or MBR */
uint8_t const BOOTSIG1 = 0XAA;
/** Value for bootSignature field int FAT/FAT32 boot sector */
uint8_t const EXTENDED_BOOT_SIG = 0X29;
//------------------------------------------------------------------------------
/**
* \struct partitionTable
* \brief MBR partition table entry
*
* A partition table entry for a MBR formatted storage device.
* The MBR partition table has four entries.
*/
struct partitionTable {
/**
* Boot Indicator . Indicates whether the volume is the active
* partition. Legal values include: 0X00. Do not use for booting.
* 0X80 Active partition.
*/
uint8_t boot;
/**
* Head part of Cylinder-head-sector address of the first block in
* the partition. Legal values are 0-255. Only used in old PC BIOS.
*/
uint8_t beginHead;
/**
* Sector part of Cylinder-head-sector address of the first block in
* the partition. Legal values are 1-63. Only used in old PC BIOS.
*/
unsigned beginSector : 6;
/** High bits cylinder for first block in partition. */
unsigned beginCylinderHigh : 2;
/**
* Combine beginCylinderLow with beginCylinderHigh. Legal values
* are 0-1023. Only used in old PC BIOS.
*/
uint8_t beginCylinderLow;
/**
* Partition type. See defines that begin with PART_TYPE_ for
* some Microsoft partition types.
*/
uint8_t type;
/**
* head part of cylinder-head-sector address of the last sector in the
* partition. Legal values are 0-255. Only used in old PC BIOS.
*/
uint8_t endHead;
/**
* Sector part of cylinder-head-sector address of the last sector in
* the partition. Legal values are 1-63. Only used in old PC BIOS.
*/
unsigned endSector : 6;
/** High bits of end cylinder */
unsigned endCylinderHigh : 2;
/**
* Combine endCylinderLow with endCylinderHigh. Legal values
* are 0-1023. Only used in old PC BIOS.
*/
uint8_t endCylinderLow;
/** Logical block address of the first block in the partition. */
uint32_t firstSector;
/** Length of the partition, in blocks. */
uint32_t totalSectors;
2012-08-22 14:49:57 +02:00
} PACKED;
2011-11-18 22:17:37 +01:00
/** Type name for partitionTable */
typedef struct partitionTable part_t;
//------------------------------------------------------------------------------
/**
* \struct masterBootRecord
*
* \brief Master Boot Record
*
* The first block of a storage device that is formatted with a MBR.
*/
struct masterBootRecord {
/** Code Area for master boot program. */
uint8_t codeArea[440];
/** Optional Windows NT disk signature. May contain boot code. */
uint32_t diskSignature;
/** Usually zero but may be more boot code. */
uint16_t usuallyZero;
/** Partition tables. */
part_t part[4];
/** First MBR signature byte. Must be 0X55 */
uint8_t mbrSig0;
/** Second MBR signature byte. Must be 0XAA */
uint8_t mbrSig1;
2012-08-22 14:49:57 +02:00
} PACKED;
2011-11-18 22:17:37 +01:00
/** Type name for masterBootRecord */
typedef struct masterBootRecord mbr_t;
//------------------------------------------------------------------------------
/**
* \struct fat_boot
*
* \brief Boot sector for a FAT12/FAT16 volume.
*
*/
struct fat_boot {
/**
* The first three bytes of the boot sector must be valid,
* executable x 86-based CPU instructions. This includes a
* jump instruction that skips the next nonexecutable bytes.
*/
uint8_t jump[3];
/**
* This is typically a string of characters that identifies
* the operating system that formatted the volume.
*/
char oemId[8];
/**
* The size of a hardware sector. Valid decimal values for this
* field are 512, 1024, 2048, and 4096. For most disks used in
* the United States, the value of this field is 512.
*/
uint16_t bytesPerSector;
/**
* Number of sectors per allocation unit. This value must be a
* power of 2 that is greater than 0. The legal values are
* 1, 2, 4, 8, 16, 32, 64, and 128. 128 should be avoided.
*/
uint8_t sectorsPerCluster;
/**
* The number of sectors preceding the start of the first FAT,
* including the boot sector. The value of this field is always 1.
*/
uint16_t reservedSectorCount;
/**
* The number of copies of the FAT on the volume.
* The value of this field is always 2.
*/
uint8_t fatCount;
/**
* For FAT12 and FAT16 volumes, this field contains the count of
* 32-byte directory entries in the root directory. For FAT32 volumes,
* this field must be set to 0. For FAT12 and FAT16 volumes, this
* value should always specify a count that when multiplied by 32
* results in a multiple of bytesPerSector. FAT16 volumes should
* use the value 512.
*/
uint16_t rootDirEntryCount;
/**
* This field is the old 16-bit total count of sectors on the volume.
* This count includes the count of all sectors in all four regions
* of the volume. This field can be 0; if it is 0, then totalSectors32
* must be nonzero. For FAT32 volumes, this field must be 0. For
* FAT12 and FAT16 volumes, this field contains the sector count, and
* totalSectors32 is 0 if the total sector count fits
* (is less than 0x10000).
*/
uint16_t totalSectors16;
/**
* This dates back to the old MS-DOS 1.x media determination and is
* no longer usually used for anything. 0xF8 is the standard value
* for fixed (nonremovable) media. For removable media, 0xF0 is
* frequently used. Legal values are 0xF0 or 0xF8-0xFF.
*/
uint8_t mediaType;
/**
* Count of sectors occupied by one FAT on FAT12/FAT16 volumes.
* On FAT32 volumes this field must be 0, and sectorsPerFat32
* contains the FAT size count.
*/
uint16_t sectorsPerFat16;
/** Sectors per track for interrupt 0x13. Not used otherwise. */
uint16_t sectorsPerTrack;
/** Number of heads for interrupt 0x13. Not used otherwise. */
uint16_t headCount;
/**
* Count of hidden sectors preceding the partition that contains this
* FAT volume. This field is generally only relevant for media
* visible on interrupt 0x13.
*/
uint32_t hidddenSectors;
/**
* This field is the new 32-bit total count of sectors on the volume.
* This count includes the count of all sectors in all four regions
* of the volume. This field can be 0; if it is 0, then
* totalSectors16 must be nonzero.
*/
uint32_t totalSectors32;
/**
* Related to the BIOS physical drive number. Floppy drives are
* identified as 0x00 and physical hard disks are identified as
* 0x80, regardless of the number of physical disk drives.
* Typically, this value is set prior to issuing an INT 13h BIOS
* call to specify the device to access. The value is only
* relevant if the device is a boot device.
*/
uint8_t driveNumber;
/** used by Windows NT - should be zero for FAT */
uint8_t reserved1;
/** 0X29 if next three fields are valid */
uint8_t bootSignature;
/**
* A random serial number created when formatting a disk,
* which helps to distinguish between disks.
* Usually generated by combining date and time.
*/
uint32_t volumeSerialNumber;
/**
* A field once used to store the volume label. The volume label
* is now stored as a special file in the root directory.
*/
char volumeLabel[11];
/**
* A field with a value of either FAT, FAT12 or FAT16,
* depending on the disk format.
*/
char fileSystemType[8];
/** X86 boot code */
uint8_t bootCode[448];
/** must be 0X55 */
uint8_t bootSectorSig0;
/** must be 0XAA */
uint8_t bootSectorSig1;
2012-08-22 14:49:57 +02:00
} PACKED;
2011-11-18 22:17:37 +01:00
/** Type name for FAT Boot Sector */
typedef struct fat_boot fat_boot_t;
//------------------------------------------------------------------------------
/**
* \struct fat32_boot
*
* \brief Boot sector for a FAT32 volume.
*
*/
struct fat32_boot {
/**
* The first three bytes of the boot sector must be valid,
* executable x 86-based CPU instructions. This includes a
* jump instruction that skips the next nonexecutable bytes.
*/
uint8_t jump[3];
/**
* This is typically a string of characters that identifies
* the operating system that formatted the volume.
*/
char oemId[8];
/**
* The size of a hardware sector. Valid decimal values for this
* field are 512, 1024, 2048, and 4096. For most disks used in
* the United States, the value of this field is 512.
*/
uint16_t bytesPerSector;
/**
* Number of sectors per allocation unit. This value must be a
* power of 2 that is greater than 0. The legal values are
* 1, 2, 4, 8, 16, 32, 64, and 128. 128 should be avoided.
*/
uint8_t sectorsPerCluster;
/**
* The number of sectors preceding the start of the first FAT,
* including the boot sector. Must not be zero
*/
uint16_t reservedSectorCount;
/**
* The number of copies of the FAT on the volume.
* The value of this field is always 2.
*/
uint8_t fatCount;
/**
* FAT12/FAT16 only. For FAT32 volumes, this field must be set to 0.
*/
uint16_t rootDirEntryCount;
/**
* For FAT32 volumes, this field must be 0.
*/
uint16_t totalSectors16;
/**
* This dates back to the old MS-DOS 1.x media determination and is
* no longer usually used for anything. 0xF8 is the standard value
* for fixed (nonremovable) media. For removable media, 0xF0 is
* frequently used. Legal values are 0xF0 or 0xF8-0xFF.
*/
uint8_t mediaType;
/**
* On FAT32 volumes this field must be 0, and sectorsPerFat32
* contains the FAT size count.
*/
uint16_t sectorsPerFat16;
/** Sectors per track for interrupt 0x13. Not used otherwise. */
uint16_t sectorsPerTrack;
/** Number of heads for interrupt 0x13. Not used otherwise. */
uint16_t headCount;
/**
* Count of hidden sectors preceding the partition that contains this
* FAT volume. This field is generally only relevant for media
* visible on interrupt 0x13.
*/
uint32_t hidddenSectors;
/**
* Contains the total number of sectors in the FAT32 volume.
*/
uint32_t totalSectors32;
/**
* Count of sectors occupied by one FAT on FAT32 volumes.
*/
uint32_t sectorsPerFat32;
/**
* This field is only defined for FAT32 media and does not exist on
* FAT12 and FAT16 media.
* Bits 0-3 -- Zero-based number of active FAT.
* Only valid if mirroring is disabled.
* Bits 4-6 -- Reserved.
* Bit 7 -- 0 means the FAT is mirrored at runtime into all FATs.
* -- 1 means only one FAT is active; it is the one referenced
* in bits 0-3.
* Bits 8-15 -- Reserved.
*/
uint16_t fat32Flags;
/**
* FAT32 version. High byte is major revision number.
* Low byte is minor revision number. Only 0.0 define.
*/
uint16_t fat32Version;
/**
* Cluster number of the first cluster of the root directory for FAT32.
* This usually 2 but not required to be 2.
*/
uint32_t fat32RootCluster;
/**
* Sector number of FSINFO structure in the reserved area of the
* FAT32 volume. Usually 1.
*/
uint16_t fat32FSInfo;
/**
* If nonzero, indicates the sector number in the reserved area
* of the volume of a copy of the boot record. Usually 6.
* No value other than 6 is recommended.
*/
uint16_t fat32BackBootBlock;
/**
* Reserved for future expansion. Code that formats FAT32 volumes
* should always set all of the bytes of this field to 0.
*/
uint8_t fat32Reserved[12];
/**
* Related to the BIOS physical drive number. Floppy drives are
* identified as 0x00 and physical hard disks are identified as
* 0x80, regardless of the number of physical disk drives.
* Typically, this value is set prior to issuing an INT 13h BIOS
* call to specify the device to access. The value is only
* relevant if the device is a boot device.
*/
uint8_t driveNumber;
/** used by Windows NT - should be zero for FAT */
uint8_t reserved1;
/** 0X29 if next three fields are valid */
uint8_t bootSignature;
/**
* A random serial number created when formatting a disk,
* which helps to distinguish between disks.
* Usually generated by combining date and time.
*/
uint32_t volumeSerialNumber;
/**
* A field once used to store the volume label. The volume label
* is now stored as a special file in the root directory.
*/
char volumeLabel[11];
/**
* A text field with a value of FAT32.
*/
char fileSystemType[8];
/** X86 boot code */
uint8_t bootCode[420];
/** must be 0X55 */
uint8_t bootSectorSig0;
/** must be 0XAA */
uint8_t bootSectorSig1;
2012-08-22 14:49:57 +02:00
} PACKED;
2011-11-18 22:17:37 +01:00
/** Type name for FAT32 Boot Sector */
typedef struct fat32_boot fat32_boot_t;
//------------------------------------------------------------------------------
/** Lead signature for a FSINFO sector */
uint32_t const FSINFO_LEAD_SIG = 0x41615252;
/** Struct signature for a FSINFO sector */
uint32_t const FSINFO_STRUCT_SIG = 0x61417272;
/**
* \struct fat32_fsinfo
*
* \brief FSINFO sector for a FAT32 volume.
*
*/
struct fat32_fsinfo {
/** must be 0X52, 0X52, 0X61, 0X41 */
uint32_t leadSignature;
/** must be zero */
uint8_t reserved1[480];
/** must be 0X72, 0X72, 0X41, 0X61 */
uint32_t structSignature;
/**
* Contains the last known free cluster count on the volume.
* If the value is 0xFFFFFFFF, then the free count is unknown
* and must be computed. Any other value can be used, but is
* not necessarily correct. It should be range checked at least
* to make sure it is <= volume cluster count.
*/
uint32_t freeCount;
/**
* This is a hint for the FAT driver. It indicates the cluster
* number at which the driver should start looking for free clusters.
* If the value is 0xFFFFFFFF, then there is no hint and the driver
* should start looking at cluster 2.
*/
uint32_t nextFree;
/** must be zero */
uint8_t reserved2[12];
/** must be 0X00, 0X00, 0X55, 0XAA */
uint8_t tailSignature[4];
2012-08-22 14:49:57 +02:00
} PACKED;
2011-11-18 22:17:37 +01:00
/** Type name for FAT32 FSINFO Sector */
typedef struct fat32_fsinfo fat32_fsinfo_t;
//------------------------------------------------------------------------------
// End Of Chain values for FAT entries
/** FAT12 end of chain value used by Microsoft. */
uint16_t const FAT12EOC = 0XFFF;
/** Minimum value for FAT12 EOC. Use to test for EOC. */
uint16_t const FAT12EOC_MIN = 0XFF8;
/** FAT16 end of chain value used by Microsoft. */
uint16_t const FAT16EOC = 0XFFFF;
/** Minimum value for FAT16 EOC. Use to test for EOC. */
uint16_t const FAT16EOC_MIN = 0XFFF8;
/** FAT32 end of chain value used by Microsoft. */
uint32_t const FAT32EOC = 0X0FFFFFFF;
/** Minimum value for FAT32 EOC. Use to test for EOC. */
uint32_t const FAT32EOC_MIN = 0X0FFFFFF8;
/** Mask a for FAT32 entry. Entries are 28 bits. */
uint32_t const FAT32MASK = 0X0FFFFFFF;
//------------------------------------------------------------------------------
/**
* \struct directoryEntry
* \brief FAT short directory entry
*
* Short means short 8.3 name, not the entry size.
*
* Date Format. A FAT directory entry date stamp is a 16-bit field that is
* basically a date relative to the MS-DOS epoch of 01/01/1980. Here is the
* format (bit 0 is the LSB of the 16-bit word, bit 15 is the MSB of the
* 16-bit word):
*
* Bits 9-15: Count of years from 1980, valid value range 0-127
* inclusive (1980-2107).
*
* Bits 5-8: Month of year, 1 = January, valid value range 1-12 inclusive.
*
* Bits 0-4: Day of month, valid value range 1-31 inclusive.
*
* Time Format. A FAT directory entry time stamp is a 16-bit field that has
* a granularity of 2 seconds. Here is the format (bit 0 is the LSB of the
* 16-bit word, bit 15 is the MSB of the 16-bit word).
*
* Bits 11-15: Hours, valid value range 0-23 inclusive.
*
* Bits 5-10: Minutes, valid value range 0-59 inclusive.
*
* Bits 0-4: 2-second count, valid value range 0-29 inclusive (0 - 58 seconds).
*
* The valid time range is from Midnight 00:00:00 to 23:59:58.
*/
struct directoryEntry {
/** Short 8.3 name.
*
* The first eight bytes contain the file name with blank fill.
* The last three bytes contain the file extension with blank fill.
*/
uint8_t name[11];
/** Entry attributes.
*
* The upper two bits of the attribute byte are reserved and should
* always be set to 0 when a file is created and never modified or
* looked at after that. See defines that begin with DIR_ATT_.
*/
uint8_t attributes;
/**
* Reserved for use by Windows NT. Set value to 0 when a file is
* created and never modify or look at it after that.
*/
uint8_t reservedNT;
/**
* The granularity of the seconds part of creationTime is 2 seconds
* so this field is a count of tenths of a second and its valid
* value range is 0-199 inclusive. (WHG note - seems to be hundredths)
*/
uint8_t creationTimeTenths;
/** Time file was created. */
uint16_t creationTime;
/** Date file was created. */
uint16_t creationDate;
/**
* Last access date. Note that there is no last access time, only
* a date. This is the date of last read or write. In the case of
* a write, this should be set to the same date as lastWriteDate.
*/
uint16_t lastAccessDate;
/**
* High word of this entry's first cluster number (always 0 for a
* FAT12 or FAT16 volume).
*/
uint16_t firstClusterHigh;
/** Time of last write. File creation is considered a write. */
uint16_t lastWriteTime;
/** Date of last write. File creation is considered a write. */
uint16_t lastWriteDate;
/** Low word of this entry's first cluster number. */
uint16_t firstClusterLow;
/** 32-bit unsigned holding this file's size in bytes. */
uint32_t fileSize;
2012-08-22 14:49:57 +02:00
} PACKED;
/**
* \struct directoryVFATEntry
* \brief VFAT long filename directory entry
*
* directoryVFATEntries are found in the same list as normal directoryEntry.
* But have the attribute field set to DIR_ATT_LONG_NAME.
*
* Long filenames are saved in multiple directoryVFATEntries.
* Each entry containing 13 UTF-16 characters.
*/
struct directoryVFATEntry {
/**
* Sequence number. Consists of 2 parts:
* bit 6: indicates first long filename block for the next file
* bit 0-4: the position of this long filename block (first block is 1)
*/
uint8_t sequenceNumber;
/** First set of UTF-16 characters */
uint16_t name1[5];//UTF-16
/** attributes (at the same location as in directoryEntry), always 0x0F */
uint8_t attributes;
/** Reserved for use by Windows NT. Always 0. */
uint8_t reservedNT;
/** Checksum of the short 8.3 filename, can be used to checked if the file system as modified by a not-long-filename aware implementation. */
uint8_t checksum;
/** Second set of UTF-16 characters */
uint16_t name2[6];//UTF-16
/** firstClusterLow is always zero for longFilenames */
uint16_t firstClusterLow;
/** Third set of UTF-16 characters */
uint16_t name3[2];//UTF-16
} PACKED;
2011-11-18 22:17:37 +01:00
//------------------------------------------------------------------------------
// Definitions for directory entries
//
/** Type name for directoryEntry */
typedef struct directoryEntry dir_t;
2012-08-22 14:49:57 +02:00
/** Type name for directoryVFATEntry */
typedef struct directoryVFATEntry vfat_t;
2011-11-18 22:17:37 +01:00
/** escape for name[0] = 0XE5 */
uint8_t const DIR_NAME_0XE5 = 0X05;
/** name[0] value for entry that is free after being "deleted" */
uint8_t const DIR_NAME_DELETED = 0XE5;
/** name[0] value for entry that is free and no allocated entries follow */
uint8_t const DIR_NAME_FREE = 0X00;
/** file is read-only */
uint8_t const DIR_ATT_READ_ONLY = 0X01;
/** File should hidden in directory listings */
uint8_t const DIR_ATT_HIDDEN = 0X02;
/** Entry is for a system file */
uint8_t const DIR_ATT_SYSTEM = 0X04;
/** Directory entry contains the volume label */
uint8_t const DIR_ATT_VOLUME_ID = 0X08;
/** Entry is for a directory */
uint8_t const DIR_ATT_DIRECTORY = 0X10;
/** Old DOS archive bit for backup support */
uint8_t const DIR_ATT_ARCHIVE = 0X20;
/** Test value for long name entry. Test is
(d->attributes & DIR_ATT_LONG_NAME_MASK) == DIR_ATT_LONG_NAME. */
uint8_t const DIR_ATT_LONG_NAME = 0X0F;
/** Test mask for long name entry */
uint8_t const DIR_ATT_LONG_NAME_MASK = 0X3F;
/** defined attribute bits */
uint8_t const DIR_ATT_DEFINED_BITS = 0X3F;
/** Directory entry is part of a long name
* \param[in] dir Pointer to a directory entry.
*
* \return true if the entry is for part of a long name else false.
*/
static inline uint8_t DIR_IS_LONG_NAME(const dir_t* dir) {
return (dir->attributes & DIR_ATT_LONG_NAME_MASK) == DIR_ATT_LONG_NAME;
}
/** Mask for file/subdirectory tests */
uint8_t const DIR_ATT_FILE_TYPE_MASK = (DIR_ATT_VOLUME_ID | DIR_ATT_DIRECTORY);
/** Directory entry is for a file
* \param[in] dir Pointer to a directory entry.
*
* \return true if the entry is for a normal file else false.
*/
static inline uint8_t DIR_IS_FILE(const dir_t* dir) {
return (dir->attributes & DIR_ATT_FILE_TYPE_MASK) == 0;
}
/** Directory entry is for a subdirectory
* \param[in] dir Pointer to a directory entry.
*
* \return true if the entry is for a subdirectory else false.
*/
static inline uint8_t DIR_IS_SUBDIR(const dir_t* dir) {
return (dir->attributes & DIR_ATT_FILE_TYPE_MASK) == DIR_ATT_DIRECTORY;
}
/** Directory entry is for a file or subdirectory
* \param[in] dir Pointer to a directory entry.
*
* \return true if the entry is for a normal file or subdirectory else false.
*/
static inline uint8_t DIR_IS_FILE_OR_SUBDIR(const dir_t* dir) {
return (dir->attributes & DIR_ATT_VOLUME_ID) == 0;
}
#endif // SdFatStructs_h
#endif