Marlin-Artillery-M600/Marlin/language_da.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

/**
 * Danish
 *
 * LCD Menu Messages
 * See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
 *
 */
#ifndef LANGUAGE_DA_H
#define LANGUAGE_DA_H

#define MAPPER_C2C3
// Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h
//#define SIMULATE_ROMFONT
#define DISPLAY_CHARSET_ISO10646_1

#define MSG_MAIN                            "Menu"
#define WELCOME_MSG                         MACHINE_NAME " er klar"
#define MSG_SD_INSERTED                     "Kort isat"
#define MSG_SD_REMOVED                      "Kort fjernet"
#define MSG_AUTOSTART                       "Autostart"
#define MSG_AUTO_HOME                       "Home" // G28
#define MSG_COOLDOWN                        "Afkøl"
#define MSG_DISABLE_STEPPERS                "Slå stepper fra"
#define MSG_LEVEL_BED_HOMING                "Homing"
#define MSG_SET_HOME_OFFSETS                "Sæt home offsets"
#define MSG_SET_ORIGIN                      "Sæt origin"
#define MSG_SWITCH_PS_ON                    "Slå strøm til"
#define MSG_SWITCH_PS_OFF                   "Slå strøm fra"
#define MSG_PREHEAT_PLA                     "Forvarm PLA"
#define MSG_PREHEAT_PLA_N                   "Forvarm PLA "
#define MSG_PREHEAT_PLA_ALL                 "Forvarm PLA Alle"
#define MSG_PREHEAT_PLA_BEDONLY             "Forvarm PLA Bed"
#define MSG_PREHEAT_PLA_SETTINGS            "Forvarm PLA conf"
#define MSG_PREHEAT_ABS                     "Forvarm ABS"
#define MSG_PREHEAT_ABS_N                   "Forvarm ABS "
#define MSG_PREHEAT_ABS_ALL                 "Forvarm ABS Alle"
#define MSG_PREHEAT_ABS_BEDONLY             "Forvarm ABS Bed"
#define MSG_PREHEAT_ABS_SETTINGS            "Forvarm ABS conf"
#define MSG_EXTRUDE                         "Extruder"
#define MSG_RETRACT                         "Retract"
#define MSG_MOVE_AXIS                       "Flyt akser"
#define MSG_MOVE_X                          "Flyt X"
#define MSG_MOVE_Y                          "Flyt Y"
#define MSG_MOVE_Z                          "Flyt Z"
#define MSG_MOVE_E                          "Extruder"
#define MSG_MOVE_01MM                       "Flyt 0.1mm"
#define MSG_MOVE_1MM                        "Flyt 1mm"
#define MSG_MOVE_10MM                       "Flyt 10mm"
#define MSG_SPEED                           "Hastighed"
#define MSG_NOZZLE                          "Dyse"
#define MSG_NOZZLE1                         "Dyse2"
#define MSG_NOZZLE2                         "Dyse3"
#define MSG_BED                             "Plade"
#define MSG_FAN_SPEED                       "Blæser hastighed"
#define MSG_FLOW                            "Flow"
#define MSG_CONTROL                         "Kontrol"
#define MSG_MIN                             " \002 Min"
#define MSG_MAX                             " \002 Max"
#define MSG_FACTOR                          " \002 Fact"
#define MSG_AUTOTEMP                        "Autotemp"
#define MSG_ON                              "On "
#define MSG_OFF                             "Off"
#define MSG_PID_P                           "PID-P"
#define MSG_PID_I                           "PID-I"
#define MSG_PID_D                           "PID-D"
#define MSG_PID_C                           "PID-C"
#define MSG_ACC                             "Accel"
#define MSG_VXY_JERK                        "Vxy-jerk"
#define MSG_VZ_JERK                         "Vz-jerk"
#define MSG_VE_JERK                         "Ve-jerk"
#define MSG_VMAX                            "Vmax "
#define MSG_X                               "x"
#define MSG_Y                               "y"
#define MSG_Z                               "z"
#define MSG_E                               "e"
#define MSG_VMIN                            "Vmin"
#define MSG_VTRAV_MIN                       "VTrav min"
#define MSG_AMAX                            "Amax "
#define MSG_A_RETRACT                       "A-retract"
#define MSG_XSTEPS                          "Xsteps/mm"
#define MSG_YSTEPS                          "Ysteps/mm"
#define MSG_ZSTEPS                          "Zsteps/mm"
#define MSG_ESTEPS                          "Esteps/mm"
#define MSG_TEMPERATURE                     "Temperatur"
#define MSG_MOTION                          "Motion"
#define MSG_VOLUMETRIC                      "Filament"
#define MSG_VOLUMETRIC_ENABLED              "E in mm3"
#define MSG_FILAMENT_DIAM                   "Fil. Dia."
#define MSG_CONTRAST                        "LCD kontrast"
#define MSG_STORE_EPROM                     "Gem i EEPROM"
#define MSG_LOAD_EPROM                      "Hent fra EEPROM"
#define MSG_RESTORE_FAILSAFE                "Gendan failsafe"
#define MSG_REFRESH                         "Genopfrisk"
#define MSG_WATCH                           "Info skærm"
#define MSG_PREPARE                         "Forbered"
#define MSG_TUNE                            "Tune"
#define MSG_PAUSE_PRINT                     "Pause printet"
#define MSG_RESUME_PRINT                    "Forsæt printet"
#define MSG_STOP_PRINT                      "Stop printet"
#define MSG_CARD_MENU                       "Print fra SD"
#define MSG_NO_CARD                         "Intet SD kort"
#define MSG_DWELL                           "Dvale..."
#define MSG_USERWAIT                        "Venter på bruger..."
#define MSG_RESUMING                        "Forsætter printet"
#define MSG_PRINT_ABORTED                   "Print annuleret"
#define MSG_NO_MOVE                         "No move."
#define MSG_KILLED                          "KILLED. "
#define MSG_STOPPED                         "STOPPED. "
#define MSG_CONTROL_RETRACT                 "Tilbagetraek mm"
#define MSG_CONTROL_RETRACT_SWAP            "Skift Re.mm"
#define MSG_CONTROL_RETRACTF                "Tilbagetræk V"
#define MSG_CONTROL_RETRACT_ZLIFT           "Hop mm"
#define MSG_CONTROL_RETRACT_RECOVER         "UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP    "S UnRet+mm"
#define MSG_CONTROL_RETRACT_RECOVERF        "UnRet  V"
#define MSG_AUTORETRACT                     "AutoRetr."
#define MSG_ZPROBE_OUT                      "Probe udenfor plade"
#define MSG_FILAMENTCHANGE                  "Skift filament"
#define MSG_INIT_SDCARD                     "Init. SD card"
#define MSG_CNG_SDCARD                      "Skift SD kort"
#define MSG_YX_UNHOMED                      "Home X/Y før Z"
#define MSG_ZPROBE_ZOFFSET                  "Z Offset"
#define MSG_BABYSTEP_X                      "Babystep X"
#define MSG_BABYSTEP_Y                      "Babystep Y"
#define MSG_BABYSTEP_Z                      "Babystep Z"
#define MSG_END_HOUR                        "Timer"
#define MSG_END_MINUTE                      "Minutter"
#define MSG_HEATING                         "Opvarmer..."
#define MSG_HEATING_COMPLETE                "Opvarmet"
#define MSG_BED_HEATING                     "Opvarmer plade"
#define MSG_BED_DONE                        "Plade opvarmet"
#define MSG_ENDSTOP_ABORT                   "Endstop abort"

#ifdef DELTA_CALIBRATION_MENU
  #define MSG_DELTA_CALIBRATE               "Delta Kalibrering"
  #define MSG_DELTA_CALIBRATE_X             "Kalibrer X"
  #define MSG_DELTA_CALIBRATE_Y             "Kalibrer Y"
  #define MSG_DELTA_CALIBRATE_Z             "Kalibrer Z"
  #define MSG_DELTA_CALIBRATE_CENTER        "Kalibrerings Center"
#endif // DELTA_CALIBRATION_MENU

#endif // LANGUAGE_DA_H
Further cleanup of comments, partial Doxygen-style Following up on #3231 2016-03-25 07:19:46 +01:00			`/**`
Added gplv3 header to all Marlin files 2016-03-24 19:01:20 +01:00			`* Marlin 3D Printer Firmware`
			`* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]`
			`*`
			`* Based on Sprinter and grbl.`
			`* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm`
			`*`
			`* This program is free software: you can redistribute it and/or modify`
			`* it under the terms of the GNU General Public License as published by`
			`* the Free Software Foundation, either version 3 of the License, or`
			`* (at your option) any later version.`
			`*`
			`* This program is distributed in the hope that it will be useful,`
			`* but WITHOUT ANY WARRANTY; without even the implied warranty of`
			`* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
			`* GNU General Public License for more details.`
			`*`
			`* You should have received a copy of the GNU General Public License`
			`* along with this program. If not, see <http://www.gnu.org/licenses/>.`
			`*`
			`*/`

Add Danish translations 2015-07-31 01:03:34 +02:00			`/**`
			`* Danish`
			`*`
			`* LCD Menu Messages`
Change link to the document documentation/LCDLanguageFont.md moved to http://www.marlinfirmware.org/ at commit 12d0983757d7986a2744136331415fbbb17758c0, but http://www.marlinfirmware.org/ isn't working. 2016-03-22 11:58:41 +01:00			`* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language`
Add Danish translations 2015-07-31 01:03:34 +02:00			`*`
			`*/`
			`#ifndef LANGUAGE_DA_H`
			`#define LANGUAGE_DA_H`

			`#define MAPPER_C2C3`
			`// Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h`
			`//#define SIMULATE_ROMFONT`
			`#define DISPLAY_CHARSET_ISO10646_1`

			`#define MSG_MAIN "Menu"`
			`#define WELCOME_MSG MACHINE_NAME " er klar"`
			`#define MSG_SD_INSERTED "Kort isat"`
			`#define MSG_SD_REMOVED "Kort fjernet"`
			`#define MSG_AUTOSTART "Autostart"`
			`#define MSG_AUTO_HOME "Home" // G28`
			`#define MSG_COOLDOWN "Afkøl"`
			`#define MSG_DISABLE_STEPPERS "Slå stepper fra"`
"Homing" as a translatable string 2016-03-19 12:41:03 +01:00			`#define MSG_LEVEL_BED_HOMING "Homing"`
Add Danish translations 2015-07-31 01:03:34 +02:00			`#define MSG_SET_HOME_OFFSETS "Sæt home offsets"`
			`#define MSG_SET_ORIGIN "Sæt origin"`
			`#define MSG_SWITCH_PS_ON "Slå strøm til"`
			`#define MSG_SWITCH_PS_OFF "Slå strøm fra"`
			`#define MSG_PREHEAT_PLA "Forvarm PLA"`
			`#define MSG_PREHEAT_PLA_N "Forvarm PLA "`
			`#define MSG_PREHEAT_PLA_ALL "Forvarm PLA Alle"`
			`#define MSG_PREHEAT_PLA_BEDONLY "Forvarm PLA Bed"`
			`#define MSG_PREHEAT_PLA_SETTINGS "Forvarm PLA conf"`
			`#define MSG_PREHEAT_ABS "Forvarm ABS"`
			`#define MSG_PREHEAT_ABS_N "Forvarm ABS "`
			`#define MSG_PREHEAT_ABS_ALL "Forvarm ABS Alle"`
			`#define MSG_PREHEAT_ABS_BEDONLY "Forvarm ABS Bed"`
			`#define MSG_PREHEAT_ABS_SETTINGS "Forvarm ABS conf"`
			`#define MSG_EXTRUDE "Extruder"`
			`#define MSG_RETRACT "Retract"`
			`#define MSG_MOVE_AXIS "Flyt akser"`
			`#define MSG_MOVE_X "Flyt X"`
			`#define MSG_MOVE_Y "Flyt Y"`
			`#define MSG_MOVE_Z "Flyt Z"`
			`#define MSG_MOVE_E "Extruder"`
			`#define MSG_MOVE_01MM "Flyt 0.1mm"`
			`#define MSG_MOVE_1MM "Flyt 1mm"`
			`#define MSG_MOVE_10MM "Flyt 10mm"`
			`#define MSG_SPEED "Hastighed"`
			`#define MSG_NOZZLE "Dyse"`
			`#define MSG_NOZZLE1 "Dyse2"`
			`#define MSG_NOZZLE2 "Dyse3"`
			`#define MSG_BED "Plade"`
			`#define MSG_FAN_SPEED "Blæser hastighed"`
			`#define MSG_FLOW "Flow"`
			`#define MSG_CONTROL "Kontrol"`
			`#define MSG_MIN " \002 Min"`
			`#define MSG_MAX " \002 Max"`
			`#define MSG_FACTOR " \002 Fact"`
			`#define MSG_AUTOTEMP "Autotemp"`
			`#define MSG_ON "On "`
			`#define MSG_OFF "Off"`
			`#define MSG_PID_P "PID-P"`
			`#define MSG_PID_I "PID-I"`
			`#define MSG_PID_D "PID-D"`
			`#define MSG_PID_C "PID-C"`
			`#define MSG_ACC "Accel"`
			`#define MSG_VXY_JERK "Vxy-jerk"`
			`#define MSG_VZ_JERK "Vz-jerk"`
			`#define MSG_VE_JERK "Ve-jerk"`
			`#define MSG_VMAX "Vmax "`
			`#define MSG_X "x"`
			`#define MSG_Y "y"`
			`#define MSG_Z "z"`
			`#define MSG_E "e"`
			`#define MSG_VMIN "Vmin"`
			`#define MSG_VTRAV_MIN "VTrav min"`
			`#define MSG_AMAX "Amax "`
			`#define MSG_A_RETRACT "A-retract"`
			`#define MSG_XSTEPS "Xsteps/mm"`
			`#define MSG_YSTEPS "Ysteps/mm"`
			`#define MSG_ZSTEPS "Zsteps/mm"`
			`#define MSG_ESTEPS "Esteps/mm"`
			`#define MSG_TEMPERATURE "Temperatur"`
			`#define MSG_MOTION "Motion"`
			`#define MSG_VOLUMETRIC "Filament"`
			`#define MSG_VOLUMETRIC_ENABLED "E in mm3"`
Show nozzles, heaters, and extruders numbered 1-4 2015-09-12 04:52:01 +02:00			`#define MSG_FILAMENT_DIAM "Fil. Dia."`
Add Danish translations 2015-07-31 01:03:34 +02:00			`#define MSG_CONTRAST "LCD kontrast"`
			`#define MSG_STORE_EPROM "Gem i EEPROM"`
			`#define MSG_LOAD_EPROM "Hent fra EEPROM"`
			`#define MSG_RESTORE_FAILSAFE "Gendan failsafe"`
			`#define MSG_REFRESH "Genopfrisk"`
			`#define MSG_WATCH "Info skærm"`
			`#define MSG_PREPARE "Forbered"`
			`#define MSG_TUNE "Tune"`
			`#define MSG_PAUSE_PRINT "Pause printet"`
			`#define MSG_RESUME_PRINT "Forsæt printet"`
			`#define MSG_STOP_PRINT "Stop printet"`
			`#define MSG_CARD_MENU "Print fra SD"`
			`#define MSG_NO_CARD "Intet SD kort"`
			`#define MSG_DWELL "Dvale..."`
			`#define MSG_USERWAIT "Venter på bruger..."`
			`#define MSG_RESUMING "Forsætter printet"`
			`#define MSG_PRINT_ABORTED "Print annuleret"`
			`#define MSG_NO_MOVE "No move."`
			`#define MSG_KILLED "KILLED. "`
			`#define MSG_STOPPED "STOPPED. "`
			`#define MSG_CONTROL_RETRACT "Tilbagetraek mm"`
			`#define MSG_CONTROL_RETRACT_SWAP "Skift Re.mm"`
			`#define MSG_CONTROL_RETRACTF "Tilbagetræk V"`
			`#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"`
			`#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"`
			`#define MSG_CONTROL_RETRACT_RECOVER_SWAP "S UnRet+mm"`
			`#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"`
			`#define MSG_AUTORETRACT "AutoRetr."`
			`#define MSG_ZPROBE_OUT "Probe udenfor plade"`
			`#define MSG_FILAMENTCHANGE "Skift filament"`
			`#define MSG_INIT_SDCARD "Init. SD card"`
			`#define MSG_CNG_SDCARD "Skift SD kort"`
axis_known_position -> axis_homed In all these cases we want the axis to be homed. If we could have lost some steps is secondary. Reenables homing seperate axis with DISABLE_X / DISABLE_Y true. 2016-03-25 14:05:20 +01:00			`#define MSG_YX_UNHOMED "Home X/Y før Z"`
Add Danish translations 2015-07-31 01:03:34 +02:00			`#define MSG_ZPROBE_ZOFFSET "Z Offset"`
			`#define MSG_BABYSTEP_X "Babystep X"`
			`#define MSG_BABYSTEP_Y "Babystep Y"`
			`#define MSG_BABYSTEP_Z "Babystep Z"`
			`#define MSG_END_HOUR "Timer"`
			`#define MSG_END_MINUTE "Minutter"`
			`#define MSG_HEATING "Opvarmer..."`
			`#define MSG_HEATING_COMPLETE "Opvarmet"`
			`#define MSG_BED_HEATING "Opvarmer plade"`
			`#define MSG_BED_DONE "Plade opvarmet"`
			`#define MSG_ENDSTOP_ABORT "Endstop abort"`

			`#ifdef DELTA_CALIBRATION_MENU`
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting 2015-10-03 08:08:58 +02:00			`#define MSG_DELTA_CALIBRATE "Delta Kalibrering"`
			`#define MSG_DELTA_CALIBRATE_X "Kalibrer X"`
			`#define MSG_DELTA_CALIBRATE_Y "Kalibrer Y"`
			`#define MSG_DELTA_CALIBRATE_Z "Kalibrer Z"`
			`#define MSG_DELTA_CALIBRATE_CENTER "Kalibrerings Center"`
Add Danish translations 2015-07-31 01:03:34 +02:00			`#endif // DELTA_CALIBRATION_MENU`

			`#endif // LANGUAGE_DA_H`