SunRed/Marlin-Artillery-M600
Archived
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
This repository has been archived on 2022-01-28. You can view files and clone it, but cannot push or open issues or pull requests.
Marlin-Artillery-M600/frameworks/CMSIS/LPC1768/driver/lpc17xx_i2c.c

1345 lines
38 KiB
C
Raw Normal View History

HAL for Re:ARM (LPC1768) architecture
2017-06-17 23:19:42 +02:00
/**********************************************************************
* $Id$ lpc17xx_i2c.c 2011-03-31
*//**
* @file lpc17xx_i2c.c
* @brief Contains all functions support for I2C firmware
* library on LPC17xx
* @version 2.1
* @date 31. Mar. 2011
* @author NXP MCU SW Application Team
*
* Copyright(C) 2010, NXP Semiconductor
* All rights reserved.
*
***********************************************************************
* Software that is described herein is for illustrative purposes only
* which provides customers with programming information regarding the
* products. This software is supplied "AS IS" without any warranties.
* NXP Semiconductors assumes no responsibility or liability for the
* use of the software, conveys no license or title under any patent,
* copyright, or mask work right to the product. NXP Semiconductors
* reserves the right to make changes in the software without
* notification. NXP Semiconductors also make no representation or
* warranty that such application will be suitable for the specified
* use without further testing or modification.
* Permission to use, copy, modify, and distribute this software and its
* documentation is hereby granted, under NXP Semiconductors'
* relevant copyright in the software, without fee, provided that it
* is used in conjunction with NXP Semiconductors microcontrollers. This
* copyright, permission, and disclaimer notice must appear in all copies of
* this code.
**********************************************************************/
/* Peripheral group ----------------------------------------------------------- */
/** @addtogroup I2C
* @{
*/
/* Includes ------------------------------------------------------------------- */
#include "lpc17xx_i2c.h"
#include "lpc17xx_clkpwr.h"
#include "lpc17xx_pinsel.h"
/* If this source file built with example, the LPC17xx FW library configuration
* file in each example directory ("lpc17xx_libcfg.h") must be included,
* otherwise the default FW library configuration file must be included instead
*/
#ifdef __BUILD_WITH_EXAMPLE__
#include "lpc17xx_libcfg.h"
#else
#include "lpc17xx_libcfg_default.h"
#endif /* __BUILD_WITH_EXAMPLE__ */
#ifdef _I2C
/* Private Types -------------------------------------------------------------- */
/** @defgroup I2C_Private_Types I2C Private Types
* @{
*/
/**
* @brief I2C device configuration structure type
*/
typedef struct
{
uint32_t txrx_setup; /* Transmission setup */
int32_t dir; /* Current direction phase, 0 - write, 1 - read */
} I2C_CFG_T;
/**
* @}
*/
/* Private Variables ---------------------------------------------------------- */
/**
* @brief II2C driver data for I2C0, I2C1 and I2C2
*/
static I2C_CFG_T i2cdat[3];
static uint32_t I2C_MasterComplete[3];
static uint32_t I2C_SlaveComplete[3];
static uint32_t I2C_MonitorBufferIndex;
/* Private Functions ---------------------------------------------------------- */
/* Get I2C number */
static int32_t I2C_getNum(LPC_I2C_TypeDef *I2Cx);
/* Generate a start condition on I2C bus (in master mode only) */
static uint32_t I2C_Start (LPC_I2C_TypeDef *I2Cx);
/* Generate a stop condition on I2C bus (in master mode only) */
static void I2C_Stop (LPC_I2C_TypeDef *I2Cx);
/* I2C send byte subroutine */
static uint32_t I2C_SendByte (LPC_I2C_TypeDef *I2Cx, uint8_t databyte);
/* I2C get byte subroutine */
static uint32_t I2C_GetByte (LPC_I2C_TypeDef *I2Cx, uint8_t *retdat, Bool ack);
/* I2C set clock (hz) */
static void I2C_SetClock (LPC_I2C_TypeDef *I2Cx, uint32_t target_clock);
/*--------------------------------------------------------------------------------*/
/********************************************************************//**
* @brief Convert from I2C peripheral to number
* @param[in] I2Cx: I2C peripheral selected, should be:
* - LPC_I2C0
* - LPC_I2C1
* - LPC_I2C2
* @return I2C number, could be: 0..2
*********************************************************************/
static int32_t I2C_getNum(LPC_I2C_TypeDef *I2Cx){
if (I2Cx == LPC_I2C0) {
return (0);
} else if (I2Cx == LPC_I2C1) {
return (1);
} else if (I2Cx == LPC_I2C2) {
return (2);
}
return (-1);
}
/********************************************************************//**
* @brief Generate a start condition on I2C bus (in master mode only)
* @param[in] I2Cx: I2C peripheral selected, should be:
* - LPC_I2C0
* - LPC_I2C1
* - LPC_I2C2
* @return value of I2C status register after generate a start condition
*********************************************************************/
static uint32_t I2C_Start (LPC_I2C_TypeDef *I2Cx)
{
// Reset STA, STO, SI
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC|I2C_I2CONCLR_STOC|I2C_I2CONCLR_STAC;
// Enter to Master Transmitter mode
I2Cx->I2CONSET = I2C_I2CONSET_STA;
// Wait for complete
while (!(I2Cx->I2CONSET & I2C_I2CONSET_SI));
I2Cx->I2CONCLR = I2C_I2CONCLR_STAC;
return (I2Cx->I2STAT & I2C_STAT_CODE_BITMASK);
}
/********************************************************************//**
* @brief Generate a stop condition on I2C bus (in master mode only)
* @param[in] I2Cx: I2C peripheral selected, should be:
* - LPC_I2C0
* - LPC_I2C1
* - LPC_I2C2
* @return None
*********************************************************************/
static void I2C_Stop (LPC_I2C_TypeDef *I2Cx)
{
/* Make sure start bit is not active */
if (I2Cx->I2CONSET & I2C_I2CONSET_STA)
{
I2Cx->I2CONCLR = I2C_I2CONCLR_STAC;
}
I2Cx->I2CONSET = I2C_I2CONSET_STO|I2C_I2CONSET_AA;
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
}
/********************************************************************//**
* @brief Send a byte
* @param[in] I2Cx: I2C peripheral selected, should be:
* - LPC_I2C0
* - LPC_I2C1
* - LPC_I2C2
* @param[in] databyte: number of byte
* @return value of I2C status register after sending
*********************************************************************/
static uint32_t I2C_SendByte (LPC_I2C_TypeDef *I2Cx, uint8_t databyte)
{
uint32_t CodeStatus = I2Cx->I2STAT & I2C_STAT_CODE_BITMASK;
if((CodeStatus != I2C_I2STAT_M_TX_START) &&
(CodeStatus != I2C_I2STAT_M_TX_RESTART) &&
(CodeStatus != I2C_I2STAT_M_TX_SLAW_ACK) &&
(CodeStatus != I2C_I2STAT_M_TX_DAT_ACK) )
{
return CodeStatus;
}
frameworks whitespace cleanup
2017-09-27 11:57:00 +02:00
HAL for Re:ARM (LPC1768) architecture
2017-06-17 23:19:42 +02:00
/* Make sure start bit is not active */
if (I2Cx->I2CONSET & I2C_I2CONSET_STA)
{
I2Cx->I2CONCLR = I2C_I2CONCLR_STAC;
}
I2Cx->I2DAT = databyte & I2C_I2DAT_BITMASK;
I2Cx->I2CONSET = I2C_I2CONSET_AA;
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
return (I2Cx->I2STAT & I2C_STAT_CODE_BITMASK);
}
/********************************************************************//**
* @brief Get a byte
* @param[in] I2Cx: I2C peripheral selected, should be:
* - LPC_I2C0
* - LPC_I2C1
* - LPC_I2C2
* @param[out] retdat pointer to return data
* @param[in] ack assert acknowledge or not, should be: TRUE/FALSE
* @return value of I2C status register after sending
*********************************************************************/
static uint32_t I2C_GetByte (LPC_I2C_TypeDef *I2Cx, uint8_t *retdat, Bool ack)
{
*retdat = (uint8_t) (I2Cx->I2DAT & I2C_I2DAT_BITMASK);
frameworks whitespace cleanup
2017-09-27 11:57:00 +02:00
HAL for Re:ARM (LPC1768) architecture
2017-06-17 23:19:42 +02:00
if (ack == TRUE)
{
I2Cx->I2CONSET = I2C_I2CONSET_AA;
}
else
{
I2Cx->I2CONCLR = I2C_I2CONCLR_AAC;
}
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
frameworks whitespace cleanup
2017-09-27 11:57:00 +02:00
HAL for Re:ARM (LPC1768) architecture
2017-06-17 23:19:42 +02:00
return (I2Cx->I2STAT & I2C_STAT_CODE_BITMASK);
}
/*********************************************************************//**
* @brief Setup clock rate for I2C peripheral
* @param[in] I2Cx I2C peripheral selected, should be:
* - LPC_I2C0
* - LPC_I2C1
* - LPC_I2C2
* @param[in] target_clock : clock of SSP (Hz)
* @return None
***********************************************************************/
static void I2C_SetClock (LPC_I2C_TypeDef *I2Cx, uint32_t target_clock)
{
uint32_t temp;
CHECK_PARAM(PARAM_I2Cx(I2Cx));
// Get PCLK of I2C controller
if (I2Cx == LPC_I2C0)
{
temp = CLKPWR_GetPCLK (CLKPWR_PCLKSEL_I2C0) / target_clock;
}
else if (I2Cx == LPC_I2C1)
{
temp = CLKPWR_GetPCLK (CLKPWR_PCLKSEL_I2C1) / target_clock;
}
else if (I2Cx == LPC_I2C2)
{
temp = CLKPWR_GetPCLK (CLKPWR_PCLKSEL_I2C2) / target_clock;
}
/* Set the I2C clock value to register */
I2Cx->I2SCLH = (uint32_t)(temp / 2);
I2Cx->I2SCLL = (uint32_t)(temp - I2Cx->I2SCLH);
}
/* End of Private Functions --------------------------------------------------- */
/* Public Functions ----------------------------------------------------------- */
/** @addtogroup I2C_Public_Functions
* @{
*/
/********************************************************************//**
* @brief Initializes the I2Cx peripheral with specified parameter.
* @param[in] I2Cx I2C peripheral selected, should be
* - LPC_I2C0
* - LPC_I2C1
* - LPC_I2C2
* @param[in] clockrate Target clock rate value to initialized I2C
* peripheral (Hz)
* @return None
*********************************************************************/
void I2C_Init(LPC_I2C_TypeDef *I2Cx, uint32_t clockrate)
{
CHECK_PARAM(PARAM_I2Cx(I2Cx));
if (I2Cx==LPC_I2C0)
{
/* Set up clock and power for I2C0 module */
CLKPWR_ConfigPPWR (CLKPWR_PCONP_PCI2C0, ENABLE);
/* As default, peripheral clock for I2C0 module
* is set to FCCLK / 2 */
CLKPWR_SetPCLKDiv(CLKPWR_PCLKSEL_I2C0, CLKPWR_PCLKSEL_CCLK_DIV_2);
}
else if (I2Cx==LPC_I2C1)
{
/* Set up clock and power for I2C1 module */
CLKPWR_ConfigPPWR (CLKPWR_PCONP_PCI2C1, ENABLE);
/* As default, peripheral clock for I2C1 module
* is set to FCCLK / 2 */
CLKPWR_SetPCLKDiv(CLKPWR_PCLKSEL_I2C1, CLKPWR_PCLKSEL_CCLK_DIV_2);
}
else if (I2Cx==LPC_I2C2)
{
/* Set up clock and power for I2C2 module */
CLKPWR_ConfigPPWR (CLKPWR_PCONP_PCI2C2, ENABLE);
/* As default, peripheral clock for I2C2 module
* is set to FCCLK / 2 */
CLKPWR_SetPCLKDiv(CLKPWR_PCLKSEL_I2C2, CLKPWR_PCLKSEL_CCLK_DIV_2);
}
else {
// Up-Support this device
return;
}
/* Set clock rate */
I2C_SetClock(I2Cx, clockrate);
/* Set I2C operation to default */
I2Cx->I2CONCLR = (I2C_I2CONCLR_AAC | I2C_I2CONCLR_STAC | I2C_I2CONCLR_I2ENC);
}
/*********************************************************************//**
* @brief De-initializes the I2C peripheral registers to their
* default reset values.
* @param[in] I2Cx I2C peripheral selected, should be
* - LPC_I2C0
* - LPC_I2C1
* - LPC_I2C2
* @return None
**********************************************************************/
void I2C_DeInit(LPC_I2C_TypeDef* I2Cx)
{
CHECK_PARAM(PARAM_I2Cx(I2Cx));
/* Disable I2C control */
I2Cx->I2CONCLR = I2C_I2CONCLR_I2ENC;
if (I2Cx==LPC_I2C0)
{
/* Disable power for I2C0 module */
CLKPWR_ConfigPPWR (CLKPWR_PCONP_PCI2C0, DISABLE);
}
else if (I2Cx==LPC_I2C1)
{
/* Disable power for I2C1 module */
CLKPWR_ConfigPPWR (CLKPWR_PCONP_PCI2C1, DISABLE);
}
else if (I2Cx==LPC_I2C2)
{
/* Disable power for I2C2 module */
CLKPWR_ConfigPPWR (CLKPWR_PCONP_PCI2C2, DISABLE);
}
}
/*********************************************************************//**
* @brief Enable or disable I2C peripheral's operation
* @param[in] I2Cx I2C peripheral selected, should be
* - LPC_I2C0
* - LPC_I2C1
* - LPC_I2C2
* @param[in] NewState New State of I2Cx peripheral's operation
* @return none
**********************************************************************/
void I2C_Cmd(LPC_I2C_TypeDef* I2Cx, en_I2C_Mode Mode, FunctionalState NewState)
{
CHECK_PARAM(PARAM_FUNCTIONALSTATE(NewState));
CHECK_PARAM(PARAM_I2Cx(I2Cx));
if (NewState == ENABLE)
{
if(Mode != I2C_SLAVE_MODE)
I2Cx->I2CONSET = I2C_I2CONSET_I2EN;
else
I2Cx->I2CONSET = I2C_I2CONSET_I2EN | I2C_I2CONSET_AA;
}
else
{
I2Cx->I2CONCLR = I2C_I2CONCLR_I2ENC;
}
}
/*********************************************************************//**
* @brief Enable/Disable interrupt for I2C peripheral
* @param[in] I2Cx I2C peripheral selected, should be:
* - LPC_I2C0
* - LPC_I2C1
* - LPC_I2C2
* @param[in] NewState New State of I2C peripheral interrupt in NVIC core
* should be:
* - ENABLE: enable interrupt for this I2C peripheral
* - DISABLE: disable interrupt for this I2C peripheral
* @return None
**********************************************************************/
void I2C_IntCmd (LPC_I2C_TypeDef *I2Cx, Bool NewState)
{
if (NewState)
{
if(I2Cx == LPC_I2C0)
{
NVIC_EnableIRQ(I2C0_IRQn);
}
else if (I2Cx == LPC_I2C1)
{
NVIC_EnableIRQ(I2C1_IRQn);
}
else if (I2Cx == LPC_I2C2)
{
NVIC_EnableIRQ(I2C2_IRQn);
}
}
else
{
if(I2Cx == LPC_I2C0)
{
NVIC_DisableIRQ(I2C0_IRQn);
}
else if (I2Cx == LPC_I2C1)
{
NVIC_DisableIRQ(I2C1_IRQn);
}
else if (I2Cx == LPC_I2C2)
{
NVIC_DisableIRQ(I2C2_IRQn);
}
}
return;
}
/*********************************************************************//**
* @brief Handle I2C Master states.
* @param[in] I2Cx I2C peripheral selected, should be:
* - LPC_I2C
* - LPC_I2C1
* - LPC_I2C2
* @param[in] CodeStatus I2C state
* @param[in] TransferCfg Pointer to a I2C_S_SETUP_Type structure that
* contains specified information about the
* configuration for master transfer.
* @return It can be
* - I2C_OK
* -I2C_BYTE_RECV
* -I2C_BYTE_SENT
* -I2C_SEND_END
* -I2C_RECV_END
* - I2C_ERR
* - I2C_NAK_RECV
**********************************************************************/
int32_t I2C_MasterHanleStates(LPC_I2C_TypeDef *I2Cx, uint32_t CodeStatus, I2C_M_SETUP_Type *TransferCfg)
{
uint8_t *txdat;
uint8_t *rxdat;
uint8_t tmp;
int32_t Ret = I2C_OK;
frameworks whitespace cleanup
2017-09-27 11:57:00 +02:00
HAL for Re:ARM (LPC1768) architecture
2017-06-17 23:19:42 +02:00
//get buffer to send/receive
txdat = (uint8_t *) &TransferCfg->tx_data[TransferCfg->tx_count];
rxdat = (uint8_t *) &TransferCfg->rx_data[TransferCfg->rx_count];
switch(CodeStatus)
{
case I2C_I2STAT_M_TX_START:
case I2C_I2STAT_M_TX_RESTART:
//case I2C_I2STAT_M_RX_START:
//case I2C_I2STAT_M_RX_RESTART
// Send data first
if(TransferCfg->tx_count < TransferCfg->tx_length)
{
/* Send slave address + WR direction bit = 0 ----------------------------------- */
I2C_SendByte(I2Cx, (TransferCfg->sl_addr7bit << 1));
Ret = I2C_BYTE_SENT;
}
else if (TransferCfg->rx_count < TransferCfg->rx_length)
{
/* Send slave address + RD direction bit = 1 ----------------------------------- */
I2C_SendByte(I2Cx, ((TransferCfg->sl_addr7bit << 1) | 0x01));
Ret = I2C_BYTE_SENT;
}
break;
case I2C_I2STAT_M_TX_SLAW_ACK:
case I2C_I2STAT_M_TX_DAT_ACK:
frameworks whitespace cleanup
2017-09-27 11:57:00 +02:00
HAL for Re:ARM (LPC1768) architecture
2017-06-17 23:19:42 +02:00
if(TransferCfg->tx_count < TransferCfg->tx_length)
{
I2C_SendByte(I2Cx, *txdat);
frameworks whitespace cleanup
2017-09-27 11:57:00 +02:00
HAL for Re:ARM (LPC1768) architecture
2017-06-17 23:19:42 +02:00
txdat++;
TransferCfg->tx_count++;
Ret = I2C_BYTE_SENT;
}
else
{
I2C_Stop(I2Cx);
Ret = I2C_SEND_END;
frameworks whitespace cleanup
2017-09-27 11:57:00 +02:00
HAL for Re:ARM (LPC1768) architecture
2017-06-17 23:19:42 +02:00
}
break;
case I2C_I2STAT_M_TX_DAT_NACK:
I2C_Stop(I2Cx);
Ret = I2C_SEND_END;
break;
case I2C_I2STAT_M_RX_ARB_LOST:
//case I2C_I2STAT_M_TX_ARB_LOST:
I2Cx->I2CONSET = I2C_I2CONSET_STA|I2C_I2CONSET_AA;
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
break;
case I2C_I2STAT_M_RX_SLAR_ACK:
I2Cx->I2CONSET = I2C_I2CONSET_AA;
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
Ret = I2C_BYTE_RECV;
break;
case I2C_I2STAT_M_RX_DAT_ACK:
if (TransferCfg->rx_count <TransferCfg->rx_length)
{
if (TransferCfg->rx_count < (TransferCfg->rx_length - 2))
{
I2C_GetByte(I2Cx, &tmp, TRUE);
Ret = I2C_BYTE_RECV;
}
else // the next byte is the last byte, send NACK instead.
{
I2C_GetByte(I2Cx, &tmp, FALSE);
Ret = I2C_BYTE_RECV;
}
*rxdat++ = tmp;
TransferCfg->rx_count++;
}
else
{
Ret = I2C_RECV_END;
}
frameworks whitespace cleanup
2017-09-27 11:57:00 +02:00
HAL for Re:ARM (LPC1768) architecture
2017-06-17 23:19:42 +02:00
break;
case I2C_I2STAT_M_RX_DAT_NACK:
I2C_GetByte(I2Cx, &tmp, FALSE);
*rxdat++ = tmp;
TransferCfg->rx_count++;
I2C_Stop(I2Cx);
Ret = I2C_RECV_END;
break;
case I2C_I2STAT_M_RX_SLAR_NACK:
case I2C_I2STAT_M_TX_SLAW_NACK:
case I2C_I2STAT_BUS_ERROR:
// Send STOP condition
I2C_Stop(I2Cx);
Ret = I2C_ERR;
break;
/* No status information */
case I2C_I2STAT_NO_INF:
default:
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
break;
}
frameworks whitespace cleanup
2017-09-27 11:57:00 +02:00
HAL for Re:ARM (LPC1768) architecture
2017-06-17 23:19:42 +02:00
return Ret;
}
/*********************************************************************//**
* @brief Handle I2C Slave states.
* @param[in] I2Cx I2C peripheral selected, should be:
* - LPC_I2C
* - LPC_I2C1
* - LPC_I2C2
* @param[in] CodeStatus I2C state
* @param[in] TransferCfg Pointer to a I2C_S_SETUP_Type structure that
* contains specified information about the
* configuration for master transfer.
* @return It can be
* - I2C_OK
* -I2C_BYTE_RECV
* -I2C_BYTE_SENT
* -I2C_SEND_END
* -I2C_RECV_END
* - I2C_ERR
* - I2C_NAK_RECV
**********************************************************************/
int32_t I2C_SlaveHanleStates(LPC_I2C_TypeDef *I2Cx, uint32_t CodeStatus, I2C_S_SETUP_Type *TransferCfg)
{
int32_t Ret = I2C_OK;
uint8_t *txdat;
uint8_t *rxdat;
//get buffer to send/receive
txdat = (uint8_t *) &TransferCfg->tx_data[TransferCfg->tx_count];
rxdat = (uint8_t *) &TransferCfg->rx_data[TransferCfg->rx_count];
frameworks whitespace cleanup
2017-09-27 11:57:00 +02:00
HAL for Re:ARM (LPC1768) architecture
2017-06-17 23:19:42 +02:00
switch (CodeStatus)
{
/* Reading phase -------------------------------------------------------- */
/* Own SLA+R has been received, ACK has been returned */
case I2C_I2STAT_S_RX_SLAW_ACK:
/* General call address has been received, ACK has been returned */
case I2C_I2STAT_S_RX_GENCALL_ACK:
I2Cx->I2CONSET = I2C_I2CONSET_AA;
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
break;
/* Arbitration has been lost in Slave Address + R/W bit as bus Master. General Call has
been received and ACK has been returned.*/
case I2C_I2STAT_S_RX_ARB_LOST_M_GENCALL:
I2Cx->I2CONSET = I2C_I2CONSET_AA|I2C_I2CONSET_STA;
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
break;
/* Previously addressed with own SLA;
* DATA byte has been received;
* ACK has been returned */
case I2C_I2STAT_S_RX_ARB_LOST_M_SLA:
case I2C_I2STAT_S_RX_PRE_SLA_DAT_ACK:
/*
* All data bytes that over-flow the specified receive
* data length, just ignore them.
*/
if ((TransferCfg->rx_count < TransferCfg->rx_length) && (TransferCfg->rx_data != NULL))
{
*rxdat++ = (uint8_t)I2Cx->I2DAT;
TransferCfg->rx_count++;
Ret = I2C_BYTE_RECV;
}
if(TransferCfg->rx_count == (TransferCfg->rx_length) ) {
I2Cx->I2CONCLR = I2C_I2CONCLR_AAC|I2C_I2CONCLR_SIC;
Ret = I2C_BYTE_RECV;
}
else {
I2Cx->I2CONSET = I2C_I2CONSET_AA;
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
}
frameworks whitespace cleanup
2017-09-27 11:57:00 +02:00
HAL for Re:ARM (LPC1768) architecture
2017-06-17 23:19:42 +02:00
break;
/* DATA has been received, Only the first data byte will be received with ACK. Additional
data will be received with NOT ACK. */
case I2C_I2STAT_S_RX_PRE_GENCALL_DAT_ACK:
if ((TransferCfg->rx_count < TransferCfg->rx_length) && (TransferCfg->rx_data != NULL))
{
*rxdat++ = (uint8_t)I2Cx->I2DAT;
TransferCfg->rx_count++;
Ret = I2C_BYTE_RECV;
}
I2Cx->I2CONCLR = I2C_I2CONCLR_AAC|I2C_I2CONCLR_SIC;
break;
/* Writing phase -------------------------------------------------------- */
/* Own SLA+R has been received, ACK has been returned */
case I2C_I2STAT_S_TX_SLAR_ACK:
/* Data has been transmitted, ACK has been received */
case I2C_I2STAT_S_TX_DAT_ACK:
/*
* All data bytes that over-flow the specified receive
* data length, just ignore them.
*/
if ((TransferCfg->tx_count < TransferCfg->tx_length) && (TransferCfg->tx_data != NULL))
{
I2Cx->I2DAT = *txdat++;
TransferCfg->tx_count++;
Ret = I2C_BYTE_SENT;
}
I2Cx->I2CONSET = I2C_I2CONSET_AA;
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
break;
/* Arbitration lost in Slave Address and R/W bit as bus Master. Own Slave Address + Read
has been received, ACK has been returned. */
case I2C_I2STAT_S_TX_ARB_LOST_M_SLA:
if ((TransferCfg->tx_count < TransferCfg->tx_length) && (TransferCfg->tx_data != NULL))
{
I2Cx->I2DAT = *txdat++;
TransferCfg->tx_count++;
Ret = I2C_BYTE_SENT;
}
I2Cx->I2CONSET = I2C_I2CONSET_AA|I2C_I2CONSET_STA;
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
break;
frameworks whitespace cleanup
2017-09-27 11:57:00 +02:00
HAL for Re:ARM (LPC1768) architecture
2017-06-17 23:19:42 +02:00
case I2C_I2STAT_S_TX_LAST_DAT_ACK:
/* Data has been transmitted, NACK has been received,
* that means there's no more data to send, exit now */
/*
* Note: Don't wait for stop event since in slave transmit mode,
* since there no proof lets us know when a stop signal has been received
* on slave side.
*/
case I2C_I2STAT_S_TX_DAT_NACK:
I2Cx->I2CONSET = I2C_I2CONSET_AA;
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
Ret = I2C_SEND_END;
break;
/* Previously addressed with own SLA;
* DATA byte has been received;
* NOT ACK has been returned */
case I2C_I2STAT_S_RX_PRE_SLA_DAT_NACK:
/* DATA has been received, NOT ACK has been returned */
case I2C_I2STAT_S_RX_PRE_GENCALL_DAT_NACK:
I2Cx->I2CONSET = I2C_I2CONSET_AA;
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
Ret = I2C_RECV_END;
break;
/*
* Note that: Return code only let us know a stop condition mixed
* with a repeat start condition in the same code value.
* So we should provide a time-out. In case this is really a stop
* condition, this will return back after time out condition. Otherwise,
* next session that is slave receive data will be completed.
*/
/* A Stop or a repeat start condition */
case I2C_I2STAT_S_RX_STA_STO_SLVREC_SLVTRX:
I2Cx->I2CONSET = I2C_I2CONSET_AA;
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
Ret = I2C_STA_STO_RECV;
break;
frameworks whitespace cleanup
2017-09-27 11:57:00 +02:00
HAL for Re:ARM (LPC1768) architecture
2017-06-17 23:19:42 +02:00
/* No status information */
case I2C_I2STAT_NO_INF:
/* Other status must be captured */
default:
I2Cx->I2CONSET = I2C_I2CONSET_AA;
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
break;
frameworks whitespace cleanup
2017-09-27 11:57:00 +02:00
HAL for Re:ARM (LPC1768) architecture
2017-06-17 23:19:42 +02:00
}
return Ret;
}
/*********************************************************************//**
* @brief General Master Interrupt handler for I2C peripheral
* @param[in] I2Cx I2C peripheral selected, should be:
* - LPC_I2C
* - LPC_I2C1
* - LPC_I2C2
* @return None
**********************************************************************/
void I2C_MasterHandler(LPC_I2C_TypeDef *I2Cx)
{
uint32_t i2cId = I2C_getNum(I2Cx);
uint8_t returnCode;
I2C_M_SETUP_Type *txrx_setup;
int32_t Ret = I2C_OK;
txrx_setup = (I2C_M_SETUP_Type *) i2cdat[i2cId].txrx_setup;
returnCode = (I2Cx->I2STAT & I2C_STAT_CODE_BITMASK);
// Save current status
txrx_setup->status = returnCode;
Ret = I2C_MasterHanleStates(I2Cx, returnCode, txrx_setup);
if(I2C_CheckError(Ret))
{
if(txrx_setup->retransmissions_count < txrx_setup->retransmissions_max)
{
// Retry
txrx_setup->retransmissions_count ++;
txrx_setup->tx_count = 0;
txrx_setup->rx_count = 0;
// Reset STA, STO, SI
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC|I2C_I2CONCLR_STOC|I2C_I2CONCLR_STAC;
I2Cx->I2CONSET = I2C_I2CONSET_STA;
return;
}
else
{
goto s_int_end;
}
}
else if (Ret & I2C_SEND_END)
{
// If no need to wait for data from Slave
frameworks whitespace cleanup
2017-09-27 11:57:00 +02:00
if(txrx_setup->rx_count >= (txrx_setup->rx_length))
HAL for Re:ARM (LPC1768) architecture
2017-06-17 23:19:42 +02:00
{
goto s_int_end;
}
else // Start to wait for data from Slave
{
// Reset STA, STO, SI
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC|I2C_I2CONCLR_STOC|I2C_I2CONCLR_STAC;
I2Cx->I2CONSET = I2C_I2CONSET_STA;
return;
}
}
frameworks whitespace cleanup
2017-09-27 11:57:00 +02:00
else if (Ret & I2C_RECV_END)
HAL for Re:ARM (LPC1768) architecture
2017-06-17 23:19:42 +02:00
{
goto s_int_end;
}
else
{
return;
}
s_int_end:
// Disable interrupt
I2C_IntCmd(I2Cx, FALSE);
I2Cx->I2CONCLR = I2C_I2CONCLR_AAC | I2C_I2CONCLR_SIC | I2C_I2CONCLR_STAC;
I2C_MasterComplete[i2cId] = TRUE;
frameworks whitespace cleanup
2017-09-27 11:57:00 +02:00
HAL for Re:ARM (LPC1768) architecture
2017-06-17 23:19:42 +02:00
}
/*********************************************************************//**
* @brief General Slave Interrupt handler for I2C peripheral
* @param[in] I2Cx I2C peripheral selected, should be:
* - LPC_I2C0
* - LPC_I2C1
* - LPC_I2C2
* @return None
**********************************************************************/
void I2C_SlaveHandler (LPC_I2C_TypeDef *I2Cx)
{
uint32_t i2cId = I2C_getNum(I2Cx);
uint8_t returnCode;
I2C_S_SETUP_Type *txrx_setup;
uint32_t timeout;
int32_t Ret = I2C_OK;
txrx_setup = (I2C_S_SETUP_Type *) i2cdat[i2cId].txrx_setup;
handle_state:
returnCode = (I2Cx->I2STAT & I2C_STAT_CODE_BITMASK);
// Save current status
txrx_setup->status = returnCode;
Ret = I2C_SlaveHanleStates(I2Cx, returnCode, txrx_setup);
if(I2C_CheckError(Ret))
{
goto s_int_end;
}
else if (Ret & I2C_STA_STO_RECV)
{
// Temporally lock the interrupt for timeout condition
I2C_IntCmd(I2Cx, FALSE);
// enable time out
timeout = I2C_SLAVE_TIME_OUT;
while(1)
{
if (I2Cx->I2CONSET & I2C_I2CONSET_SI)
{
// re-Enable interrupt
I2C_IntCmd(I2Cx, TRUE);
goto handle_state;
}
else
{
timeout--;
if (timeout == 0)
{
// timeout occur, it's really a stop condition
txrx_setup->status |= I2C_SETUP_STATUS_DONE;
goto s_int_end;
}
}
frameworks whitespace cleanup
2017-09-27 11:57:00 +02:00
}
HAL for Re:ARM (LPC1768) architecture
2017-06-17 23:19:42 +02:00
}
else if(Ret &I2C_SEND_END)
{
goto s_int_end;
}
else
{
return;
}
s_int_end:
// Disable interrupt
I2C_IntCmd(I2Cx, FALSE);
I2Cx->I2CONCLR = I2C_I2CONCLR_AAC | I2C_I2CONCLR_SIC | I2C_I2CONCLR_STAC;
I2C_SlaveComplete[i2cId] = TRUE;
}
/*********************************************************************//**
* @brief Transmit and Receive data in master mode
* @param[in] I2Cx I2C peripheral selected, should be:
* - LPC_I2C0
* - LPC_I2C1
* - LPC_I2C2
* @param[in] TransferCfg Pointer to a I2C_M_SETUP_Type structure that
* contains specified information about the
* configuration for master transfer.
* @param[in] Opt a I2C_TRANSFER_OPT_Type type that selected for
* interrupt or polling mode.
* @return SUCCESS or ERROR
*
* Note:
* - In case of using I2C to transmit data only, either transmit length set to 0
* or transmit data pointer set to NULL.
* - In case of using I2C to receive data only, either receive length set to 0
* or receive data pointer set to NULL.
* - In case of using I2C to transmit followed by receive data, transmit length,
* transmit data pointer, receive length and receive data pointer should be set
* corresponding.
**********************************************************************/
Status I2C_MasterTransferData(LPC_I2C_TypeDef *I2Cx, I2C_M_SETUP_Type *TransferCfg, \
I2C_TRANSFER_OPT_Type Opt)
{
uint32_t i2cId = I2C_getNum(I2Cx); uint32_t CodeStatus;
int32_t Ret = I2C_OK;
// Reset I2C setup value to default state
TransferCfg->tx_count = 0;
TransferCfg->rx_count = 0;
TransferCfg->status = 0;
if (Opt == I2C_TRANSFER_POLLING)
{
/* First Start condition -------------------------------------------------------------- */
TransferCfg->retransmissions_count = 0;
retry:
// Reset I2C setup value to default state
TransferCfg->tx_count = 0;
TransferCfg->rx_count = 0;
// Start command
CodeStatus = I2C_Start(I2Cx);
frameworks whitespace cleanup
2017-09-27 11:57:00 +02:00
HAL for Re:ARM (LPC1768) architecture
2017-06-17 23:19:42 +02:00
while(1) // send data first and then receive data from Slave.
{
Ret = I2C_MasterHanleStates(I2Cx, CodeStatus, TransferCfg);
if(I2C_CheckError(Ret))
{
TransferCfg->retransmissions_count++;
if (TransferCfg->retransmissions_count > TransferCfg->retransmissions_max){
// save status
TransferCfg->status = CodeStatus | I2C_SETUP_STATUS_NOACKF;
goto error;
} else {
goto retry;
}
}
else if( (Ret & I2C_BYTE_SENT) ||
(Ret & I2C_BYTE_RECV))
{
frameworks whitespace cleanup
2017-09-27 11:57:00 +02:00
// Wait for sending ends
HAL for Re:ARM (LPC1768) architecture
2017-06-17 23:19:42 +02:00
while (!(I2Cx->I2CONSET & I2C_I2CONSET_SI));
}
else if (Ret & I2C_SEND_END) // already send all data
{
// If no need to wait for data from Slave
frameworks whitespace cleanup
2017-09-27 11:57:00 +02:00
if(TransferCfg->rx_count >= (TransferCfg->rx_length))
HAL for Re:ARM (LPC1768) architecture
2017-06-17 23:19:42 +02:00
{
break;
}
else
{
I2C_Start(I2Cx);
}
}
else if (Ret & I2C_RECV_END) // already receive all data
{
break;
}
CodeStatus = I2Cx->I2STAT & I2C_STAT_CODE_BITMASK;
}
return SUCCESS;
error:
return ERROR;
}
else if (Opt == I2C_TRANSFER_INTERRUPT)
{
// Setup tx_rx data, callback and interrupt handler
i2cdat[i2cId].txrx_setup = (uint32_t) TransferCfg;
// Set direction phase, write first
i2cdat[i2cId].dir = 0;
/* First Start condition -------------------------------------------------------------- */
// Reset STA, STO, SI
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC|I2C_I2CONCLR_STOC|I2C_I2CONCLR_STAC;
I2Cx->I2CONSET = I2C_I2CONSET_STA;
I2C_IntCmd(I2Cx, TRUE);
return (SUCCESS);
}
return ERROR;
}
/*********************************************************************//**
* @brief Receive and Transmit data in slave mode
* @param[in] I2Cx I2C peripheral selected, should be
* - LPC_I2C0
* - LPC_I2C1
* - LPC_I2C2
* @param[in] TransferCfg Pointer to a I2C_S_SETUP_Type structure that
* contains specified information about the
* configuration for master transfer.
* @param[in] Opt I2C_TRANSFER_OPT_Type type that selected for
* interrupt or polling mode.
* @return SUCCESS or ERROR
*
* Note:
* The mode of slave's operation depends on the command sent from master on
* the I2C bus. If the master send a SLA+W command, this sub-routine will
* use receive data length and receive data pointer. If the master send a SLA+R
* command, this sub-routine will use transmit data length and transmit data
* pointer.
* If the master issue an repeat start command or a stop command, the slave will
* enable an time out condition, during time out condition, if there's no activity
* on I2C bus, the slave will exit, otherwise (i.e. the master send a SLA+R/W),
* the slave then switch to relevant operation mode. The time out should be used
* because the return status code can not show difference from stop and repeat
* start command in slave operation.
* In case of the expected data length from master is greater than data length
* that slave can support:
* - In case of reading operation (from master): slave will return I2C_I2DAT_IDLE_CHAR
* value.
* - In case of writing operation (from master): slave will ignore remain data from master.
**********************************************************************/
Status I2C_SlaveTransferData(LPC_I2C_TypeDef *I2Cx, I2C_S_SETUP_Type *TransferCfg, \
I2C_TRANSFER_OPT_Type Opt)
{
int32_t Ret = I2C_OK;
frameworks whitespace cleanup
2017-09-27 11:57:00 +02:00
HAL for Re:ARM (LPC1768) architecture
2017-06-17 23:19:42 +02:00
uint32_t CodeStatus;
uint32_t timeout;
int32_t time_en;
uint32_t i2cId = I2C_getNum(I2Cx);
// Reset I2C setup value to default state
TransferCfg->tx_count = 0;
TransferCfg->rx_count = 0;
TransferCfg->status = 0;
// Polling option
if (Opt == I2C_TRANSFER_POLLING)
{
/* Set AA bit to ACK command on I2C bus */
I2Cx->I2CONSET = I2C_I2CONSET_AA;
frameworks whitespace cleanup
2017-09-27 11:57:00 +02:00
HAL for Re:ARM (LPC1768) architecture
2017-06-17 23:19:42 +02:00
/* Clear SI bit to be ready ... */
I2Cx->I2CONCLR = (I2C_I2CONCLR_SIC | I2C_I2CONCLR_STAC|I2C_I2CONCLR_STOC);
time_en = 0;
timeout = 0;
while (1)
{
/* Check SI flag ready */
if (I2Cx->I2CONSET & I2C_I2CONSET_SI)
{
time_en = 0;
CodeStatus = (I2Cx->I2STAT & I2C_STAT_CODE_BITMASK);
Ret = I2C_SlaveHanleStates(I2Cx, CodeStatus, TransferCfg);
if(I2C_CheckError(Ret))
{
goto s_error;
}
else if(Ret & I2C_STA_STO_RECV)
{
time_en = 1;
timeout = 0;
}
else if (Ret & I2C_SEND_END)
{
goto s_end_stage;
}
}
else if (time_en)
{
if (timeout++ > I2C_SLAVE_TIME_OUT)
{
// it's really a stop condition, goto end stage
goto s_end_stage;
}
}
}
s_end_stage:
/* Clear AA bit to disable ACK on I2C bus */
I2Cx->I2CONCLR = I2C_I2CONCLR_AAC;
// Check if there's no error during operation
// Update status
TransferCfg->status = CodeStatus | I2C_SETUP_STATUS_DONE;
return SUCCESS;
s_error:
/* Clear AA bit to disable ACK on I2C bus */
I2Cx->I2CONCLR = I2C_I2CONCLR_AAC;
// Update status
TransferCfg->status = CodeStatus;
return ERROR;
}
else if (Opt == I2C_TRANSFER_INTERRUPT)
{
// Setup tx_rx data, callback and interrupt handler
i2cdat[i2cId].txrx_setup = (uint32_t) TransferCfg;
// Set direction phase, read first
i2cdat[i2cId].dir = 1;
// Enable AA
I2Cx->I2CONSET = I2C_I2CONSET_AA;
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC | I2C_I2CONCLR_STAC;
I2C_IntCmd(I2Cx, TRUE);
return (SUCCESS);
}
return ERROR;
}
/*********************************************************************//**
* @brief Set Own slave address in I2C peripheral corresponding to
* parameter specified in OwnSlaveAddrConfigStruct.
* @param[in] I2Cx I2C peripheral selected, should be
* - LPC_I2C0
* - LPC_I2C1
* - LPC_I2C2
* @param[in] OwnSlaveAddrConfigStruct Pointer to a I2C_OWNSLAVEADDR_CFG_Type
* structure that contains the configuration information for the
* specified I2C slave address.
* @return None
**********************************************************************/
void I2C_SetOwnSlaveAddr(LPC_I2C_TypeDef *I2Cx, I2C_OWNSLAVEADDR_CFG_Type *OwnSlaveAddrConfigStruct)
{
uint32_t tmp;
CHECK_PARAM(PARAM_I2Cx(I2Cx));
CHECK_PARAM(PARAM_I2C_SLAVEADDR_CH(OwnSlaveAddrConfigStruct->SlaveAddrChannel));
CHECK_PARAM(PARAM_FUNCTIONALSTATE(OwnSlaveAddrConfigStruct->GeneralCallState));
tmp = (((uint32_t)(OwnSlaveAddrConfigStruct->SlaveAddr_7bit << 1)) \
| ((OwnSlaveAddrConfigStruct->GeneralCallState == ENABLE) ? 0x01 : 0x00))& I2C_I2ADR_BITMASK;
switch (OwnSlaveAddrConfigStruct->SlaveAddrChannel)
{
case 0:
I2Cx->I2ADR0 = tmp;
I2Cx->I2MASK0 = I2C_I2MASK_MASK((uint32_t) \
(OwnSlaveAddrConfigStruct->SlaveAddrMaskValue));
break;
case 1:
I2Cx->I2ADR1 = tmp;
I2Cx->I2MASK1 = I2C_I2MASK_MASK((uint32_t) \
(OwnSlaveAddrConfigStruct->SlaveAddrMaskValue));
break;
case 2:
I2Cx->I2ADR2 = tmp;
I2Cx->I2MASK2 = I2C_I2MASK_MASK((uint32_t) \
(OwnSlaveAddrConfigStruct->SlaveAddrMaskValue));
break;
case 3:
I2Cx->I2ADR3 = tmp;
I2Cx->I2MASK3 = I2C_I2MASK_MASK((uint32_t) \
(OwnSlaveAddrConfigStruct->SlaveAddrMaskValue));
break;
}
}
/*********************************************************************//**
* @brief Configures functionality in I2C monitor mode
* @param[in] I2Cx I2C peripheral selected, should be
* - LPC_I2C0
* - LPC_I2C1
* - LPC_I2C2
* @param[in] MonitorCfgType Monitor Configuration type, should be:
* - I2C_MONITOR_CFG_SCL_OUTPUT: I2C module can 'stretch'
* the clock line (hold it low) until it has had time to
* respond to an I2C interrupt.
* - I2C_MONITOR_CFG_MATCHALL: When this bit is set to '1'
* and the I2C is in monitor mode, an interrupt will be
* generated on ANY address received.
* @param[in] NewState New State of this function, should be:
* - ENABLE: Enable this function.
* - DISABLE: Disable this function.
* @return None
**********************************************************************/
void I2C_MonitorModeConfig(LPC_I2C_TypeDef *I2Cx, uint32_t MonitorCfgType, FunctionalState NewState)
{
CHECK_PARAM(PARAM_I2Cx(I2Cx));
CHECK_PARAM(PARAM_I2C_MONITOR_CFG(MonitorCfgType));
CHECK_PARAM(PARAM_FUNCTIONALSTATE(NewState));
if (NewState == ENABLE)
{
I2Cx->MMCTRL |= MonitorCfgType;
}
else
{
I2Cx->MMCTRL &= (~MonitorCfgType) & I2C_I2MMCTRL_BITMASK;
}
}
/*********************************************************************//**
* @brief Enable/Disable I2C monitor mode
* @param[in] I2Cx I2C peripheral selected, should be
* - LPC_I2C0
* - LPC_I2C1
* - LPC_I2C2
* @param[in] NewState New State of this function, should be:
* - ENABLE: Enable monitor mode.
* - DISABLE: Disable monitor mode.
* @return None
**********************************************************************/
void I2C_MonitorModeCmd(LPC_I2C_TypeDef *I2Cx, FunctionalState NewState)
{
CHECK_PARAM(PARAM_I2Cx(I2Cx));
CHECK_PARAM(PARAM_FUNCTIONALSTATE(NewState));
if (NewState == ENABLE)
{
I2Cx->MMCTRL |= I2C_I2MMCTRL_MM_ENA;
I2Cx->I2CONSET = I2C_I2CONSET_AA;
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC | I2C_I2CONCLR_STAC;
}
else
{
I2Cx->MMCTRL &= (~I2C_I2MMCTRL_MM_ENA) & I2C_I2MMCTRL_BITMASK;
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC | I2C_I2CONCLR_STAC | I2C_I2CONCLR_AAC;
}
I2C_MonitorBufferIndex = 0;
}
/*********************************************************************//**
* @brief Get data from I2C data buffer in monitor mode.
* @param[in] I2Cx I2C peripheral selected, should be
* - LPC_I2C0
* - LPC_I2C1
* - LPC_I2C2
* @return None
* Note: In monitor mode, the I2C module may lose the ability to stretch
* the clock (stall the bus) if the ENA_SCL bit is not set. This means that
* the processor will have a limited amount of time to read the contents of
* the data received on the bus. If the processor reads the I2DAT shift
* register, as it ordinarily would, it could have only one bit-time to
* respond to the interrupt before the received data is overwritten by
* new data.
**********************************************************************/
uint8_t I2C_MonitorGetDatabuffer(LPC_I2C_TypeDef *I2Cx)
{
CHECK_PARAM(PARAM_I2Cx(I2Cx));
return ((uint8_t)(I2Cx->I2DATA_BUFFER));
}
/*********************************************************************//**
* @brief Get data from I2C data buffer in monitor mode.
* @param[in] I2Cx I2C peripheral selected, should be
* - LPC_I2C0
* - LPC_I2C1
* - LPC_I2C2
* @return None
* Note: In monitor mode, the I2C module may lose the ability to stretch
* the clock (stall the bus) if the ENA_SCL bit is not set. This means that
* the processor will have a limited amount of time to read the contents of
* the data received on the bus. If the processor reads the I2DAT shift
* register, as it ordinarily would, it could have only one bit-time to
* respond to the interrupt before the received data is overwritten by
* new data.
**********************************************************************/
BOOL_8 I2C_MonitorHandler(LPC_I2C_TypeDef *I2Cx, uint8_t *buffer, uint32_t size)
{
BOOL_8 ret=FALSE;
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
buffer[I2C_MonitorBufferIndex] = (uint8_t)(I2Cx->I2DATA_BUFFER);
I2C_MonitorBufferIndex++;
if(I2C_MonitorBufferIndex >= size)
{
ret = TRUE;
}
return ret;
}
/*********************************************************************//**
* @brief Get status of Master Transfer
* @param[in] I2Cx I2C peripheral selected, should be:
* - LPC_I2C0
* - LPC_I2C1
* - LPC_I2C2
* @return Master transfer status, could be:
* - TRUE master transfer completed
* - FALSE master transfer have not completed yet
**********************************************************************/
uint32_t I2C_MasterTransferComplete(LPC_I2C_TypeDef *I2Cx)
{
uint32_t retval, tmp;
tmp = I2C_getNum(I2Cx);
retval = I2C_MasterComplete[tmp];
I2C_MasterComplete[tmp] = FALSE;
return retval;
}
/*********************************************************************//**
* @brief Get status of Slave Transfer
* @param[in] I2Cx I2C peripheral selected, should be:
* - LPC_I2C0
* - LPC_I2C1
* - LPC_I2C2
* @return Complete status, could be: TRUE/FALSE
**********************************************************************/
uint32_t I2C_SlaveTransferComplete(LPC_I2C_TypeDef *I2Cx)
{
uint32_t retval, tmp;
tmp = I2C_getNum(I2Cx);
retval = I2C_SlaveComplete[tmp];
I2C_SlaveComplete[tmp] = FALSE;
return retval;
}
/**
* @}
*/
#endif /* _I2C */
/**
* @}
*/
/* --------------------------------- End Of File ------------------------------ */
Reference in a new issue Copy permalink