/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
* HAL for stm32duino.com based on Libmaple and compatible (STM32F1)
#include <libmaple/iwdg.h>
* The watchdog clock is 40Khz. We need a 4 seconds interval, so use a /256 preescaler and
* 625 reload value (counts down to 0)
* use 1250 for 8 seconds
#define STM32F1_WD_RELOAD 625
// Arduino STM32F1 core now has watchdog support
// Initialize watchdog with a 4 second countdown time
void watchdog_init();
// Reset watchdog. MUST be called at least every 4 seconds after the
// first watchdog_init or STM32F1 will reset.
void HAL_watchdog_refresh();