This repository has been archived on 2022-01-28. You can view files and clone it, but cannot push or open issues or pull requests.
Marlin-Artillery-M600/Marlin/gcode.h

286 lines
8.8 KiB
C
Raw Normal View History

2017-05-20 10:03:08 +02:00
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* gcode.h - Parser for a GCode line, providing a parameter interface.
* Codes like M149 control the way the GCode parser behaves,
* so settings for these codes are located in this class.
*/
#ifndef GCODE_H
#define GCODE_H
#include "enum.h"
#include "types.h"
#include "MarlinConfig.h"
//#define DEBUG_GCODE_PARSER
#if ENABLED(DEBUG_GCODE_PARSER)
#include "hex_print_routines.h"
#include "serial.h"
#endif
#if ENABLED(INCH_MODE_SUPPORT)
extern bool volumetric_enabled;
#endif
/**
* GCode parser
*
* - Parse a single gcode line for its letter, code, subcode, and parameters
* - FASTER_GCODE_PARSER:
* - Flags existing params (1 bit each)
* - Stores value offsets (1 byte each)
* - Provide accessors for parameters:
* - Parameter exists
* - Parameter has value
* - Parameter value in different units and types
*/
class GCodeParser {
private:
static char *value_ptr; // Set by seen, used to fetch the value
#if ENABLED(FASTER_GCODE_PARSER)
static byte codebits[4]; // Parameters pre-scanned
static uint8_t param[26]; // For A-Z, offsets into command args
#else
static char *command_args; // Args start here, for slow scan
#endif
public:
// Global states for GCode-level units features
#if ENABLED(INCH_MODE_SUPPORT)
static float linear_unit_factor, volumetric_unit_factor;
#endif
#if ENABLED(TEMPERATURE_UNITS_SUPPORT)
static TempUnit input_temp_units;
#endif
// Command line state
static char *command_ptr, // The command, so it can be echoed
*string_arg; // string of command line
static char command_letter; // G, M, or T
static int codenum; // 123
#if USE_GCODE_SUBCODES
static int subcode; // .1
#endif
#if ENABLED(DEBUG_GCODE_PARSER)
void debug();
#endif
// Reset is done before parsing
static void reset();
#if ENABLED(FASTER_GCODE_PARSER)
// Set the flag and pointer for a parameter
static void set(const char c, char * const ptr
#if ENABLED(DEBUG_GCODE_PARSER)
, const bool debug=false
#endif
) {
const uint8_t ind = c - 'A';
if (ind >= COUNT(param)) return; // Only A-Z
SBI(codebits[ind >> 3], ind & 0x7); // parameter exists
param[ind] = ptr ? ptr - command_ptr : 0; // parameter offset or 0
#if ENABLED(DEBUG_GCODE_PARSER)
if (debug) {
SERIAL_ECHOPAIR("Set bit ", (int)(ind & 0x7));
SERIAL_ECHOPAIR(" of index ", (int)(ind >> 3));
SERIAL_ECHOLNPAIR(" | param = ", hex_address((void*)param[ind]));
}
#endif
}
// Code seen bit was set. If not found, value_ptr is unchanged.
// This allows "if (seen('A')||seen('B'))" to use the last-found value.
static bool seen(const char c) {
const uint8_t ind = c - 'A';
if (ind >= COUNT(param)) return false; // Only A-Z
const bool b = TEST(codebits[ind >> 3], ind & 0x7);
if (b) value_ptr = command_ptr + param[ind];
return b;
}
#else
// Code is found in the string. If not found, value_ptr is unchanged.
// This allows "if (seen('A')||seen('B'))" to use the last-found value.
static bool seen(const char c) {
2017-05-27 22:58:22 +02:00
const char *p = strchr(command_args, c);
2017-05-20 10:03:08 +02:00
const bool b = !!p;
2017-06-01 04:18:16 +02:00
if (b) value_ptr = DECIMAL_SIGNED(p[1]) ? &p[1] : (char*)NULL;
2017-05-20 10:03:08 +02:00
return b;
}
#endif // FASTER_GCODE_PARSER
// Populate all fields by parsing a single line of GCode
// This uses 54 bytes of SRAM to speed up seen/value
static void parse(char * p);
// Code value pointer was set
FORCE_INLINE static bool has_value() { return value_ptr != NULL; }
// Float removes 'E' to prevent scientific notation interpretation
inline static float value_float() {
if (value_ptr) {
char *e = value_ptr;
for (;;) {
const char c = *e;
if (c == '\0' || c == ' ') break;
if (c == 'E' || c == 'e') {
*e = '\0';
const float ret = strtod(value_ptr, NULL);
*e = c;
return ret;
}
++e;
}
return strtod(value_ptr, NULL);
}
return 0.0;
}
// Code value as a long or ulong
inline static long value_long() { return value_ptr ? strtol(value_ptr, NULL, 10) : 0L; }
inline unsigned static long value_ulong() { return value_ptr ? strtoul(value_ptr, NULL, 10) : 0UL; }
// Code value for use as time
FORCE_INLINE static millis_t value_millis() { return value_ulong(); }
FORCE_INLINE static millis_t value_millis_from_seconds() { return value_float() * 1000UL; }
// Reduce to fewer bits
FORCE_INLINE static int value_int() { return (int)value_long(); }
FORCE_INLINE uint16_t value_ushort() { return (uint16_t)value_long(); }
inline static uint8_t value_byte() { return (uint8_t)(constrain(value_long(), 0, 255)); }
// Bool is true with no value or non-zero
inline static bool value_bool() { return !has_value() || value_byte(); }
// Units modes: Inches, Fahrenheit, Kelvin
#if ENABLED(INCH_MODE_SUPPORT)
inline static void set_input_linear_units(LinearUnit units) {
switch (units) {
case LINEARUNIT_INCH:
linear_unit_factor = 25.4;
break;
case LINEARUNIT_MM:
default:
linear_unit_factor = 1.0;
break;
}
volumetric_unit_factor = pow(linear_unit_factor, 3.0);
}
inline static float axis_unit_factor(const AxisEnum axis) {
return (axis >= E_AXIS && volumetric_enabled ? volumetric_unit_factor : linear_unit_factor);
}
inline static float value_linear_units() { return value_float() * linear_unit_factor; }
inline static float value_axis_units(const AxisEnum axis) { return value_float() * axis_unit_factor(axis); }
inline static float value_per_axis_unit(const AxisEnum axis) { return value_float() / axis_unit_factor(axis); }
#else
FORCE_INLINE static float value_linear_units() { return value_float(); }
FORCE_INLINE static float value_axis_units(const AxisEnum a) { UNUSED(a); return value_float(); }
FORCE_INLINE static float value_per_axis_unit(const AxisEnum a) { UNUSED(a); return value_float(); }
#endif
#if ENABLED(TEMPERATURE_UNITS_SUPPORT)
inline static void set_input_temp_units(TempUnit units) { input_temp_units = units; }
#if ENABLED(ULTIPANEL) && DISABLED(DISABLE_M503)
FORCE_INLINE static char temp_units_code() {
return input_temp_units == TEMPUNIT_K ? 'K' : input_temp_units == TEMPUNIT_F ? 'F' : 'C';
}
FORCE_INLINE static char* temp_units_name() {
return input_temp_units == TEMPUNIT_K ? PSTR("Kelvin") : input_temp_units == TEMPUNIT_F ? PSTR("Fahrenheit") : PSTR("Celsius");
2017-05-20 10:03:08 +02:00
}
inline static float to_temp_units(const float &f) {
switch (input_temp_units) {
case TEMPUNIT_F:
return f * 0.5555555556 + 32.0;
case TEMPUNIT_K:
return f + 273.15;
case TEMPUNIT_C:
default:
return f;
}
}
#endif // ULTIPANEL && !DISABLE_M503
inline static float value_celsius() {
const float f = value_float();
switch (input_temp_units) {
case TEMPUNIT_F:
return (f - 32.0) * 0.5555555556;
case TEMPUNIT_K:
return f - 273.15;
case TEMPUNIT_C:
default:
return f;
}
}
inline static float value_celsius_diff() {
switch (input_temp_units) {
case TEMPUNIT_F:
return value_float() * 0.5555555556;
case TEMPUNIT_C:
case TEMPUNIT_K:
default:
return value_float();
}
}
#else
FORCE_INLINE static float value_celsius() { return value_float(); }
FORCE_INLINE static float value_celsius_diff() { return value_float(); }
#endif
FORCE_INLINE static float value_feedrate() { return value_linear_units(); }
void unknown_command_error();
};
extern GCodeParser parser;
#endif // GCODE_H