This repository has been archived on 2022-01-28. You can view files and clone it, but cannot push or open issues or pull requests.
Marlin-Artillery-M600/Marlin/MarlinSerial.h

195 lines
6.5 KiB
C
Raw Normal View History

/**
2016-03-24 19:01:20 +01:00
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
HardwareSerial.h - Hardware serial library for Wiring
Copyright (c) 2006 Nicholas Zambetti. All right reserved.
Modified 28 September 2010 by Mark Sproul
*/
#ifndef MarlinSerial_h
#define MarlinSerial_h
#include "Marlin.h"
2011-11-28 21:51:44 +01:00
#ifndef CRITICAL_SECTION_START
#define CRITICAL_SECTION_START unsigned char _sreg = SREG; cli();
#define CRITICAL_SECTION_END SREG = _sreg;
#endif
2015-01-24 06:11:50 +01:00
#ifndef SERIAL_PORT
#define SERIAL_PORT 0
#endif
// The presence of the UBRRH register is used to detect a UART.
#define UART_PRESENT(port) ((port == 0 && (defined(UBRRH) || defined(UBRR0H))) || \
(port == 1 && defined(UBRR1H)) || (port == 2 && defined(UBRR2H)) || \
(port == 3 && defined(UBRR3H)))
// These are macros to build serial port register names for the selected SERIAL_PORT (C preprocessor
// requires two levels of indirection to expand macro values properly)
#define SERIAL_REGNAME(registerbase,number,suffix) SERIAL_REGNAME_INTERNAL(registerbase,number,suffix)
#if SERIAL_PORT == 0 && (!defined(UBRR0H) || !defined(UDR0)) // use un-numbered registers if necessary
2015-01-24 06:11:50 +01:00
#define SERIAL_REGNAME_INTERNAL(registerbase,number,suffix) registerbase##suffix
#else
2015-01-24 06:11:50 +01:00
#define SERIAL_REGNAME_INTERNAL(registerbase,number,suffix) registerbase##number##suffix
#endif
// Registers used by MarlinSerial class (these are expanded
// depending on selected serial port
#define M_UCSRxA SERIAL_REGNAME(UCSR,SERIAL_PORT,A) // defines M_UCSRxA to be UCSRnA where n is the serial port number
#define M_UCSRxB SERIAL_REGNAME(UCSR,SERIAL_PORT,B)
#define M_RXENx SERIAL_REGNAME(RXEN,SERIAL_PORT,)
#define M_TXENx SERIAL_REGNAME(TXEN,SERIAL_PORT,)
#define M_RXCIEx SERIAL_REGNAME(RXCIE,SERIAL_PORT,)
#define M_UDREx SERIAL_REGNAME(UDRE,SERIAL_PORT,)
#define M_UDRx SERIAL_REGNAME(UDR,SERIAL_PORT,)
#define M_UBRRxH SERIAL_REGNAME(UBRR,SERIAL_PORT,H)
#define M_UBRRxL SERIAL_REGNAME(UBRR,SERIAL_PORT,L)
#define M_RXCx SERIAL_REGNAME(RXC,SERIAL_PORT,)
#define M_USARTx_RX_vect SERIAL_REGNAME(USART,SERIAL_PORT,_RX_vect)
#define M_U2Xx SERIAL_REGNAME(U2X,SERIAL_PORT,)
#define DEC 10
#define HEX 16
#define OCT 8
#define BIN 2
#define BYTE 0
#ifndef USBCON
// Define constants and variables for buffering incoming serial data. We're
// using a ring buffer (I think), in which rx_buffer_head is the index of the
// location to which to write the next incoming character and rx_buffer_tail
// is the index of the location from which to read.
// 256 is the max limit due to uint8_t head and tail. Use only powers of 2. (...,16,32,64,128,256)
#ifndef RX_BUFFER_SIZE
#define RX_BUFFER_SIZE 128
#endif
#if !((RX_BUFFER_SIZE == 256) ||(RX_BUFFER_SIZE == 128) ||(RX_BUFFER_SIZE == 64) ||(RX_BUFFER_SIZE == 32) ||(RX_BUFFER_SIZE == 16) ||(RX_BUFFER_SIZE == 8) ||(RX_BUFFER_SIZE == 4) ||(RX_BUFFER_SIZE == 2))
#error "RX_BUFFER_SIZE has to be a power of 2 and >= 2"
#endif
2015-01-24 06:11:50 +01:00
struct ring_buffer {
unsigned char buffer[RX_BUFFER_SIZE];
2016-02-03 21:20:34 +01:00
volatile uint8_t head;
volatile uint8_t tail;
};
#if UART_PRESENT(SERIAL_PORT)
extern ring_buffer rx_buffer;
#endif
#if ENABLED(EMERGENCY_PARSER)
#include "language.h"
void emergency_parser(unsigned char c);
#endif
2015-01-24 06:11:50 +01:00
class MarlinSerial { //: public Stream
public:
MarlinSerial();
void begin(long);
void end();
2011-11-28 19:34:42 +01:00
int peek(void);
int read(void);
void flush(void);
2015-01-24 06:11:50 +01:00
2016-02-03 21:20:34 +01:00
FORCE_INLINE uint8_t available(void) {
CRITICAL_SECTION_START;
uint8_t h = rx_buffer.head;
uint8_t t = rx_buffer.tail;
CRITICAL_SECTION_END;
return (uint8_t)(RX_BUFFER_SIZE + h - t) & (RX_BUFFER_SIZE - 1);
}
2015-01-24 06:11:50 +01:00
FORCE_INLINE void write(uint8_t c) {
while (!TEST(M_UCSRxA, M_UDREx))
;
M_UDRx = c;
}
2015-01-24 06:11:50 +01:00
FORCE_INLINE void checkRx(void) {
if (TEST(M_UCSRxA, M_RXCx)) {
unsigned char c = M_UDRx;
CRITICAL_SECTION_START;
uint8_t h = rx_buffer.head;
uint8_t i = (uint8_t)(h + 1) & (RX_BUFFER_SIZE - 1);
// if we should be storing the received character into the location
// just before the tail (meaning that the head would advance to the
// current location of the tail), we're about to overflow the buffer
// and so we don't write the character or advance the head.
if (i != rx_buffer.tail) {
rx_buffer.buffer[h] = c;
rx_buffer.head = i;
}
CRITICAL_SECTION_END;
#if ENABLED(EMERGENCY_PARSER)
emergency_parser(c);
#endif
}
}
2015-01-24 06:11:50 +01:00
private:
void printNumber(unsigned long, uint8_t);
void printFloat(double, uint8_t);
2011-11-28 19:34:42 +01:00
2015-01-24 06:11:50 +01:00
public:
FORCE_INLINE void write(const char* str) { while (*str) write(*str++); }
FORCE_INLINE void write(const uint8_t* buffer, size_t size) { while (size--) write(*buffer++); }
FORCE_INLINE void print(const String& s) { for (int i = 0; i < (int)s.length(); i++) write(s[i]); }
FORCE_INLINE void print(const char* str) { write(str); }
2011-11-28 19:34:42 +01:00
void print(char, int = BYTE);
void print(unsigned char, int = BYTE);
void print(int, int = DEC);
void print(unsigned int, int = DEC);
void print(long, int = DEC);
void print(unsigned long, int = DEC);
void print(double, int = 2);
void println(const String& s);
void println(const char[]);
void println(char, int = BYTE);
void println(unsigned char, int = BYTE);
void println(int, int = DEC);
void println(unsigned int, int = DEC);
void println(long, int = DEC);
void println(unsigned long, int = DEC);
void println(double, int = 2);
void println(void);
};
extern MarlinSerial customizedSerial;
#endif // !USBCON
// Use the UART for Bluetooth in AT90USB configurations
#if defined(USBCON) && ENABLED(BLUETOOTH)
extern HardwareSerial bluetoothSerial;
#endif
#endif