Marlin-Artillery-M600/Marlin/pins_BRAINWAVE.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

/**
 * Brainwave 1.0 pin assignments (AT90USB646)
 *
 * Requires hardware bundle for Arduino:
 * https://github.com/unrepentantgeek/brainwave-arduino
 */

#ifndef __AVR_AT90USB646__
  #error "Oops!  Make sure you have 'Brainwave' selected from the 'Tools -> Boards' menu."
#endif

#define X_STEP_PIN         27
#define X_DIR_PIN          29
#define X_ENABLE_PIN       28
#define X_STOP_PIN          7
#define X_ATT_PIN          26

#define Y_STEP_PIN         31
#define Y_DIR_PIN          33
#define Y_ENABLE_PIN       32
#define Y_STOP_PIN          6
#define Y_ATT_PIN          30

#define Z_STEP_PIN         17
#define Z_DIR_PIN          19
#define Z_ENABLE_PIN       18
#define Z_STOP_PIN          5
#define Z_ATT_PIN          16

#define E0_STEP_PIN        21
#define E0_DIR_PIN         23
#define E0_ENABLE_PIN      22
#define E0_ATT_PIN         20

#define HEATER_0_PIN        4  // Extruder
#define HEATER_1_PIN       -1
#define HEATER_2_PIN       -1
#define HEATER_BED_PIN     38  // Bed
#define FAN_PIN             3  // Fan

#define TEMP_0_PIN          7  // Extruder / Analog pin numbering
#define TEMP_1_PIN         -1
#define TEMP_2_PIN         -1
#define TEMP_BED_PIN        6  // Bed / Analog pin numbering

#define SDPOWER            -1
#define SDSS               -1
#define LED_PIN            39
#define PS_ON_PIN          -1
#define KILL_PIN           -1

#if DISABLED(SDSUPPORT)
  // these pins are defined in the SD library if building with SD support
  #define SCK_PIN           9
  #define MISO_PIN         11
  #define MOSI_PIN         10
#endif
Further cleanup of comments, partial Doxygen-style Following up on #3231 2016-03-25 07:19:46 +01:00			`/**`
Added gplv3 header to all Marlin files 2016-03-24 19:01:20 +01:00			`* Marlin 3D Printer Firmware`
			`* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]`
			`*`
			`* Based on Sprinter and grbl.`
			`* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm`
			`*`
			`* This program is free software: you can redistribute it and/or modify`
			`* it under the terms of the GNU General Public License as published by`
			`* the Free Software Foundation, either version 3 of the License, or`
			`* (at your option) any later version.`
			`*`
			`* This program is distributed in the hope that it will be useful,`
			`* but WITHOUT ANY WARRANTY; without even the implied warranty of`
			`* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
			`* GNU General Public License for more details.`
			`*`
			`* You should have received a copy of the GNU General Public License`
			`* along with this program. If not, see <http://www.gnu.org/licenses/>.`
			`*`
			`*/`

Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-26 03:40:00 +01:00			`/**`
			`* Brainwave 1.0 pin assignments (AT90USB646)`
			`*`
			`* Requires hardware bundle for Arduino:`
			`* https://github.com/unrepentantgeek/brainwave-arduino`
			`*/`

			`#ifndef __AVR_AT90USB646__`
Enclose all #error strings with apostrophes 2016-05-13 14:10:23 +02:00			`#error "Oops! Make sure you have 'Brainwave' selected from the 'Tools -> Boards' menu."`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-26 03:40:00 +01:00			`#endif`

			`#define X_STEP_PIN 27`
			`#define X_DIR_PIN 29`
			`#define X_ENABLE_PIN 28`
			`#define X_STOP_PIN 7`
			`#define X_ATT_PIN 26`

			`#define Y_STEP_PIN 31`
			`#define Y_DIR_PIN 33`
			`#define Y_ENABLE_PIN 32`
			`#define Y_STOP_PIN 6`
			`#define Y_ATT_PIN 30`

			`#define Z_STEP_PIN 17`
			`#define Z_DIR_PIN 19`
			`#define Z_ENABLE_PIN 18`
			`#define Z_STOP_PIN 5`
			`#define Z_ATT_PIN 16`

			`#define E0_STEP_PIN 21`
			`#define E0_DIR_PIN 23`
			`#define E0_ENABLE_PIN 22`
			`#define E0_ATT_PIN 20`

			`#define HEATER_0_PIN 4 // Extruder`
			`#define HEATER_1_PIN -1`
			`#define HEATER_2_PIN -1`
			`#define HEATER_BED_PIN 38 // Bed`
			`#define FAN_PIN 3 // Fan`

			`#define TEMP_0_PIN 7 // Extruder / Analog pin numbering`
			`#define TEMP_1_PIN -1`
			`#define TEMP_2_PIN -1`
			`#define TEMP_BED_PIN 6 // Bed / Analog pin numbering`

			`#define SDPOWER -1`
			`#define SDSS -1`
			`#define LED_PIN 39`
			`#define PS_ON_PIN -1`
			`#define KILL_PIN -1`

Overridable Options - Part 4 (PR#2556) Apply `ENABLED` / `DISABLED` / `HAS_SERVOS` macros to pins files. 2015-07-31 07:11:19 +02:00			`#if DISABLED(SDSUPPORT)`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-26 03:40:00 +01:00			`// these pins are defined in the SD library if building with SD support`
			`#define SCK_PIN 9`
			`#define MISO_PIN 11`
			`#define MOSI_PIN 10`
			`#endif`