This repository has been archived on 2022-01-28. You can view files and clone it, but cannot push or open issues or pull requests.
Marlin-Artillery-M600/Marlin/mesh_bed_leveling.h

134 lines
4.7 KiB
C
Raw Normal View History

/**
2016-03-24 19:01:20 +01:00
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
2015-03-15 10:43:26 +01:00
#include "Marlin.h"
#if ENABLED(MESH_BED_LEVELING)
2017-03-15 09:20:41 +01:00
enum MeshLevelingState {
MeshReport,
MeshStart,
MeshNext,
MeshSet,
MeshSetZOffset,
MeshReset
};
enum MBLStatus {
MBL_STATUS_NONE = 0,
MBL_STATUS_HAS_MESH_BIT = 0,
MBL_STATUS_ACTIVE_BIT = 1,
MBL_STATUS_REACTIVATE_BIT = 2
};
2016-03-13 07:38:55 +01:00
#define MESH_X_DIST ((MESH_MAX_X - (MESH_MIN_X))/(MESH_NUM_X_POINTS - 1))
#define MESH_Y_DIST ((MESH_MAX_Y - (MESH_MIN_Y))/(MESH_NUM_Y_POINTS - 1))
2015-03-15 10:43:26 +01:00
class mesh_bed_leveling {
public:
uint8_t status; // Has Mesh and Is Active bits
float z_offset;
2015-03-15 10:43:26 +01:00
float z_values[MESH_NUM_Y_POINTS][MESH_NUM_X_POINTS];
2015-03-15 23:18:11 +01:00
mesh_bed_leveling();
2015-03-15 23:18:11 +01:00
void reset();
2016-12-05 08:54:27 +01:00
static FORCE_INLINE float get_probe_x(const int8_t i) { return MESH_MIN_X + (MESH_X_DIST) * i; }
static FORCE_INLINE float get_probe_y(const int8_t i) { return MESH_MIN_Y + (MESH_Y_DIST) * i; }
void set_z(const int8_t px, const int8_t py, const float &z) { z_values[py][px] = z; }
2016-05-22 02:38:14 +02:00
2016-12-05 08:54:27 +01:00
bool active() const { return TEST(status, MBL_STATUS_ACTIVE_BIT); }
void set_active(const bool onOff) { onOff ? SBI(status, MBL_STATUS_ACTIVE_BIT) : CBI(status, MBL_STATUS_ACTIVE_BIT); }
bool has_mesh() const { return TEST(status, MBL_STATUS_HAS_MESH_BIT); }
void set_has_mesh(const bool onOff) { onOff ? SBI(status, MBL_STATUS_HAS_MESH_BIT) : CBI(status, MBL_STATUS_HAS_MESH_BIT); }
2017-03-15 09:20:41 +01:00
bool reactivate() { bool b = TEST(status, MBL_STATUS_REACTIVATE_BIT); CBI(status, MBL_STATUS_REACTIVATE_BIT); return b; }
void set_reactivate(const bool onOff) { onOff ? SBI(status, MBL_STATUS_REACTIVATE_BIT) : CBI(status, MBL_STATUS_REACTIVATE_BIT); }
2016-12-05 08:54:27 +01:00
inline void zigzag(const int8_t index, int8_t &px, int8_t &py) const {
2016-05-22 02:38:14 +02:00
px = index % (MESH_NUM_X_POINTS);
py = index / (MESH_NUM_X_POINTS);
if (py & 1) px = (MESH_NUM_X_POINTS - 1) - px; // Zig zag
2016-04-13 11:37:41 +02:00
}
2016-12-05 08:54:27 +01:00
void set_zigzag_z(const int8_t index, const float &z) {
2016-05-22 02:38:14 +02:00
int8_t px, py;
zigzag(index, px, py);
set_z(px, py, z);
}
2016-12-05 08:54:27 +01:00
int8_t cell_index_x(const float &x) const {
int8_t cx = (x - (MESH_MIN_X)) * (1.0 / (MESH_X_DIST));
2016-05-22 04:17:39 +02:00
return constrain(cx, 0, (MESH_NUM_X_POINTS) - 2);
2016-05-22 02:38:14 +02:00
}
2016-12-05 08:54:27 +01:00
int8_t cell_index_y(const float &y) const {
int8_t cy = (y - (MESH_MIN_Y)) * (1.0 / (MESH_Y_DIST));
2016-05-22 04:17:39 +02:00
return constrain(cy, 0, (MESH_NUM_Y_POINTS) - 2);
2016-04-13 11:37:41 +02:00
}
2016-12-05 08:54:27 +01:00
int8_t probe_index_x(const float &x) const {
int8_t px = (x - (MESH_MIN_X) + (MESH_X_DIST) * 0.5) * (1.0 / (MESH_X_DIST));
2016-05-22 04:22:08 +02:00
return (px >= 0 && px < (MESH_NUM_X_POINTS)) ? px : -1;
2015-03-15 10:43:26 +01:00
}
2016-12-05 08:54:27 +01:00
int8_t probe_index_y(const float &y) const {
int8_t py = (y - (MESH_MIN_Y) + (MESH_Y_DIST) * 0.5) * (1.0 / (MESH_Y_DIST));
2016-05-22 04:22:08 +02:00
return (py >= 0 && py < (MESH_NUM_Y_POINTS)) ? py : -1;
2015-03-15 10:43:26 +01:00
}
2016-12-05 08:54:27 +01:00
float calc_z0(const float &a0, const float &a1, const float &z1, const float &a2, const float &z2) const {
const float delta_z = (z2 - z1) / (a2 - a1);
const float delta_a = a0 - a1;
return z1 + delta_a * delta_z;
2015-03-15 10:43:26 +01:00
}
2016-12-05 08:54:46 +01:00
float get_z(const float &x0, const float &y0
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
, const float &factor
#endif
) const {
2016-06-08 04:10:39 +02:00
int8_t cx = cell_index_x(x0),
cy = cell_index_y(y0);
2016-05-22 02:38:14 +02:00
if (cx < 0 || cy < 0) return z_offset;
float z1 = calc_z0(x0,
2016-05-22 02:38:14 +02:00
get_probe_x(cx), z_values[cy][cx],
get_probe_x(cx + 1), z_values[cy][cx + 1]);
float z2 = calc_z0(x0,
2016-05-22 02:38:14 +02:00
get_probe_x(cx), z_values[cy + 1][cx],
get_probe_x(cx + 1), z_values[cy + 1][cx + 1]);
float z0 = calc_z0(y0,
2016-05-22 02:38:14 +02:00
get_probe_y(cy), z1,
get_probe_y(cy + 1), z2);
2016-12-05 08:54:46 +01:00
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
return z0 * factor + z_offset;
#else
return z0 + z_offset;
#endif
2015-03-15 10:43:26 +01:00
}
};
2015-03-15 10:43:26 +01:00
extern mesh_bed_leveling mbl;
2015-03-15 10:43:26 +01:00
#endif // MESH_BED_LEVELING