Marlin-Artillery-M600/Marlin/pins_SAINSMART_2IN1.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

/**
 *  Sainsmart 2-in-1 pin assignments
 */

#include "pins_RAMPS_14_EFB.h"

#undef BOARD_NAME
#define BOARD_NAME          "Sainsmart"

#undef FAN_PIN
#define FAN_PIN             7 // PART FAN in front of board next to Extruder heat

#undef HEATER_0_PIN
#define HEATER_0_PIN        9   // EXTRUDER 1

#undef HEATER_1_PIN
#define HEATER_1_PIN       10   // EXTRUDER 2
Support for MKS v1.3/1.4 and Sainsmart RAMPS 1.4 variants 2016-04-02 01:33:02 +02:00			`/**`
			`* Marlin 3D Printer Firmware`
			`* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]`
			`*`
			`* Based on Sprinter and grbl.`
			`* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm`
			`*`
			`* This program is free software: you can redistribute it and/or modify`
			`* it under the terms of the GNU General Public License as published by`
			`* the Free Software Foundation, either version 3 of the License, or`
			`* (at your option) any later version.`
			`*`
			`* This program is distributed in the hope that it will be useful,`
			`* but WITHOUT ANY WARRANTY; without even the implied warranty of`
			`* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
			`* GNU General Public License for more details.`
			`*`
			`* You should have received a copy of the GNU General Public License`
			`* along with this program. If not, see <http://www.gnu.org/licenses/>.`
			`*`
			`*/`

			`/**`
			`* Sainsmart 2-in-1 pin assignments`
			`*/`

			`#include "pins_RAMPS_14_EFB.h"`

Add "About Printer" information menu. Includes: firmware version / branch / date. extruder count board information (name, serial details, power supply type) thermistors (names, min/max temperatures) *printer statistics (PRINTCOUNTER details) Thanks to @thinkyhead for contributions. 2016-06-30 11:24:29 +02:00			`#undef BOARD_NAME`
			`#define BOARD_NAME "Sainsmart"`

Support for MKS v1.3/1.4 and Sainsmart RAMPS 1.4 variants 2016-04-02 01:33:02 +02:00			`#undef FAN_PIN`
			`#define FAN_PIN 7 // PART FAN in front of board next to Extruder heat`

			`#undef HEATER_0_PIN`
			`#define HEATER_0_PIN 9 // EXTRUDER 1`

			`#undef HEATER_1_PIN`
			`#define HEATER_1_PIN 10 // EXTRUDER 2`