This repository has been archived on 2022-01-28. You can view files and clone it, but cannot push or open issues or pull requests.
Marlin-Artillery-M600/Marlin/src/feature/pause.cpp

364 lines
10 KiB
C++
Raw Normal View History

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* feature/pause.cpp - Pause feature support functions
* This may be combined with related G-codes if features are consolidated.
*/
#include "../inc/MarlinConfig.h"
#if ENABLED(ADVANCED_PAUSE_FEATURE) || ENABLED(PARK_HEAD_ON_PAUSE)
#include "../Marlin.h"
#include "../gcode/gcode.h"
#include "../module/motion.h"
#include "../module/planner.h"
#include "../module/stepper.h"
#include "../module/printcounter.h"
#include "../module/temperature.h"
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
#include "../feature/runout.h"
#endif
#if ENABLED(ULTIPANEL)
#include "../lcd/ultralcd.h"
#endif
#include "../libs/buzzer.h"
#include "../libs/nozzle.h"
// private:
static float resume_position[XYZE];
#if ENABLED(SDSUPPORT)
#include "../sd/cardreader.h"
static bool sd_print_paused = false;
#endif
2017-09-30 23:06:43 +02:00
#if HAS_BUZZER
static void filament_change_beep(const int8_t max_beep_count, const bool init=false) {
static millis_t next_buzz = 0;
static int8_t runout_beep = 0;
2017-09-30 23:06:43 +02:00
if (init) next_buzz = runout_beep = 0;
2017-09-30 23:06:43 +02:00
const millis_t ms = millis();
if (ELAPSED(ms, next_buzz)) {
if (max_beep_count < 0 || runout_beep < max_beep_count + 5) { // Only beep as long as we're supposed to
next_buzz = ms + ((max_beep_count < 0 || runout_beep < max_beep_count) ? 2500 : 400);
BUZZ(300, 2000);
runout_beep++;
}
}
}
2017-09-30 23:06:43 +02:00
#endif
static void ensure_safe_temperature() {
bool heaters_heating = true;
wait_for_heatup = true; // M108 will clear this
while (wait_for_heatup && heaters_heating) {
idle();
heaters_heating = false;
HOTEND_LOOP() {
if (thermalManager.degTargetHotend(e) && abs(thermalManager.degHotend(e) - thermalManager.degTargetHotend(e)) > TEMP_HYSTERESIS) {
heaters_heating = true;
#if ENABLED(ULTIPANEL)
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_WAIT_FOR_NOZZLES_TO_HEAT);
#endif
break;
}
}
}
}
2017-10-23 16:34:16 +02:00
void do_pause_e_move(const float &length, const float fr) {
2017-11-10 09:26:49 +01:00
current_position[E_AXIS] += length / planner.e_factor[active_extruder];
2017-10-23 16:34:16 +02:00
set_destination_from_current();
#if IS_KINEMATIC
planner.buffer_line_kinematic(destination, fr, active_extruder);
#else
2017-11-09 05:13:33 +01:00
buffer_line_to_destination(fr);
2017-10-23 16:34:16 +02:00
#endif
stepper.synchronize();
}
// public:
bool move_away_flag = false;
bool pause_print(const float &retract, const point_t &park_point, const float &unload_length/*=0*/,
const int8_t max_beep_count/*=0*/, const bool show_lcd/*=false*/
) {
if (move_away_flag) return false; // already paused
2017-12-25 08:36:42 +01:00
#ifdef ACTION_ON_PAUSE
SERIAL_ECHOLNPGM("//action:" ACTION_ON_PAUSE);
#endif
if (!DEBUGGING(DRYRUN) && unload_length != 0) {
#if ENABLED(PREVENT_COLD_EXTRUSION)
if (!thermalManager.allow_cold_extrude &&
thermalManager.degTargetHotend(active_extruder) < thermalManager.extrude_min_temp) {
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_TOO_COLD_FOR_M600);
return false;
}
#endif
ensure_safe_temperature(); // wait for extruder to heat up before unloading
}
// Indicate that the printer is paused
move_away_flag = true;
// Pause the print job and timer
#if ENABLED(SDSUPPORT)
if (IS_SD_PRINTING) {
card.pauseSDPrint();
sd_print_paused = true;
}
#endif
print_job_timer.pause();
// Show initial message and wait for synchronize steppers
if (show_lcd) {
#if ENABLED(ULTIPANEL)
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_INIT);
#endif
}
stepper.synchronize();
2017-10-23 16:34:16 +02:00
COPY(resume_position, current_position); // Save current position for later
// Initial retract before move to filament change position
if (retract && !thermalManager.tooColdToExtrude(active_extruder))
do_pause_e_move(retract, PAUSE_PARK_RETRACT_FEEDRATE);
// Park the nozzle by moving up by z_lift and then moving to (x_pos, y_pos)
Nozzle::park(2, park_point);
if (unload_length != 0) {
if (show_lcd) {
#if ENABLED(ULTIPANEL)
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_UNLOAD);
idle();
#endif
}
// Unload filament
2017-10-23 16:34:16 +02:00
do_pause_e_move(unload_length, FILAMENT_CHANGE_UNLOAD_FEEDRATE);
}
if (show_lcd) {
#if ENABLED(ULTIPANEL)
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_INSERT);
#endif
}
#if HAS_BUZZER
filament_change_beep(max_beep_count, true);
#endif
idle();
// Disable extruders steppers for manual filament changing (only on boards that have separate ENABLE_PINS)
#if E0_ENABLE_PIN != X_ENABLE_PIN && E1_ENABLE_PIN != Y_ENABLE_PIN
disable_e_steppers();
safe_delay(100);
#endif
// Start the heater idle timers
const millis_t nozzle_timeout = (millis_t)(PAUSE_PARK_NOZZLE_TIMEOUT) * 1000UL;
HOTEND_LOOP()
thermalManager.start_heater_idle_timer(e, nozzle_timeout);
return true;
}
void wait_for_filament_reload(const int8_t max_beep_count/*=0*/) {
bool nozzle_timed_out = false;
// Wait for filament insert by user and press button
KEEPALIVE_STATE(PAUSED_FOR_USER);
wait_for_user = true; // LCD click or M108 will clear this
while (wait_for_user) {
#if HAS_BUZZER
filament_change_beep(max_beep_count);
#endif
// If the nozzle has timed out, wait for the user to press the button to re-heat the nozzle, then
// re-heat the nozzle, re-show the insert screen, restart the idle timers, and start over
if (!nozzle_timed_out)
HOTEND_LOOP()
nozzle_timed_out |= thermalManager.is_heater_idle(e);
if (nozzle_timed_out) {
#if ENABLED(ULTIPANEL)
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_CLICK_TO_HEAT_NOZZLE);
#endif
// Wait for LCD click or M108
while (wait_for_user) idle(true);
// Re-enable the heaters if they timed out
HOTEND_LOOP() thermalManager.reset_heater_idle_timer(e);
// Wait for the heaters to reach the target temperatures
ensure_safe_temperature();
#if ENABLED(ULTIPANEL)
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_INSERT);
#endif
// Start the heater idle timers
const millis_t nozzle_timeout = (millis_t)(PAUSE_PARK_NOZZLE_TIMEOUT) * 1000UL;
HOTEND_LOOP()
thermalManager.start_heater_idle_timer(e, nozzle_timeout);
wait_for_user = true; /* Wait for user to load filament */
nozzle_timed_out = false;
#if HAS_BUZZER
filament_change_beep(max_beep_count, true);
#endif
}
idle(true);
}
KEEPALIVE_STATE(IN_HANDLER);
}
void resume_print(const float &load_length/*=0*/, const float &initial_extrude_length/*=0*/, const int8_t max_beep_count/*=0*/) {
bool nozzle_timed_out = false;
if (!move_away_flag) return;
// Re-enable the heaters if they timed out
HOTEND_LOOP() {
nozzle_timed_out |= thermalManager.is_heater_idle(e);
thermalManager.reset_heater_idle_timer(e);
}
if (nozzle_timed_out) ensure_safe_temperature();
#if HAS_BUZZER
filament_change_beep(max_beep_count, true);
#endif
if (load_length != 0) {
#if ENABLED(ULTIPANEL)
// Show "insert filament"
if (nozzle_timed_out)
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_INSERT);
#endif
KEEPALIVE_STATE(PAUSED_FOR_USER);
wait_for_user = true; // LCD click or M108 will clear this
while (wait_for_user && nozzle_timed_out) {
#if HAS_BUZZER
filament_change_beep(max_beep_count);
#endif
idle(true);
}
KEEPALIVE_STATE(IN_HANDLER);
#if ENABLED(ULTIPANEL)
// Show "load" message
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_LOAD);
#endif
// Load filament
2017-10-23 16:34:16 +02:00
do_pause_e_move(load_length, FILAMENT_CHANGE_LOAD_FEEDRATE);
}
#if ENABLED(ULTIPANEL) && ADVANCED_PAUSE_EXTRUDE_LENGTH > 0
if (!thermalManager.tooColdToExtrude(active_extruder)) {
float extrude_length = initial_extrude_length;
do {
if (extrude_length > 0) {
// "Wait for filament extrude"
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_EXTRUDE);
// Extrude filament to get into hotend
do_pause_e_move(extrude_length, ADVANCED_PAUSE_EXTRUDE_FEEDRATE);
}
// Show "Extrude More" / "Resume" menu and wait for reply
KEEPALIVE_STATE(PAUSED_FOR_USER);
wait_for_user = false;
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_OPTION);
while (advanced_pause_menu_response == ADVANCED_PAUSE_RESPONSE_WAIT_FOR) idle(true);
KEEPALIVE_STATE(IN_HANDLER);
extrude_length = ADVANCED_PAUSE_EXTRUDE_LENGTH;
// Keep looping if "Extrude More" was selected
} while (advanced_pause_menu_response == ADVANCED_PAUSE_RESPONSE_EXTRUDE_MORE);
}
#endif
#if ENABLED(ULTIPANEL)
// "Wait for print to resume"
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_RESUME);
#endif
// Set extruder to saved position
2017-10-23 16:34:16 +02:00
planner.set_e_position_mm((current_position[E_AXIS] = resume_position[E_AXIS]));
// Move XY to starting position, then Z
do_blocking_move_to_xy(resume_position[X_AXIS], resume_position[Y_AXIS], NOZZLE_PARK_XY_FEEDRATE);
do_blocking_move_to_z(resume_position[Z_AXIS], NOZZLE_PARK_Z_FEEDRATE);
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
filament_ran_out = false;
#endif
#if ENABLED(ULTIPANEL)
2017-10-23 16:34:16 +02:00
// Show pause status screen
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_STATUS);
#endif
2017-12-25 08:36:42 +01:00
#ifdef ACTION_ON_RESUME
SERIAL_ECHOLNPGM("//action:" ACTION_ON_RESUME);
#endif
#if ENABLED(SDSUPPORT)
if (sd_print_paused) {
card.startFileprint();
sd_print_paused = false;
}
#endif
move_away_flag = false;
}
#endif // ADVANCED_PAUSE_FEATURE || PARK_HEAD_ON_PAUSE