This repository has been archived on 2022-01-28. You can view files and clone it, but cannot push or open issues or pull requests.
Marlin-Artillery-M600/Marlin/src/pins/stm32/pins_BIGTREE_SKR_PRO_V1.1.h

243 lines
5.9 KiB
C
Raw Normal View History

/**
* Marlin 3D Printer Firmware
2019-07-07 20:48:25 +02:00
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
2019-07-07 20:48:25 +02:00
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#ifndef TARGET_STM32F4
#error "Oops! Select an STM32F4 board in 'Tools > Board.'"
2019-07-14 22:34:01 +02:00
#elif HOTENDS > 3 || E_STEPPERS > 3
#error "BIGTREE SKR Pro V1.1 supports up to 3 hotends / E-steppers."
#endif
2019-07-10 12:53:37 +02:00
#define BOARD_NAME "BIGTREE SKR Pro 1.1"
#define SRAM_EEPROM_EMULATION
//
// Servos
//
#define SERVO0_PIN PA1
//
// Limit Switches
//
#define X_MIN_PIN PB10
#define X_MAX_PIN PE15
#define Y_MIN_PIN PE12
#define Y_MAX_PIN PE10
#define Z_MIN_PIN PG8
#define Z_MAX_PIN PG5
//
// Z Probe must be this pins
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN PA2
#endif
//
// Steppers
//
#define X_STEP_PIN PE9
#define X_DIR_PIN PF1
#define X_ENABLE_PIN PF2
#ifndef X_CS_PIN
#define X_CS_PIN PA15
#endif
#define Y_STEP_PIN PE11
#define Y_DIR_PIN PE8
#define Y_ENABLE_PIN PD7
#ifndef Y_CS_PIN
#define Y_CS_PIN PB8
#endif
#define Z_STEP_PIN PE13
#define Z_DIR_PIN PC2
#define Z_ENABLE_PIN PC0
#ifndef Z_CS_PIN
#define Z_CS_PIN PB9
#endif
#define E0_STEP_PIN PE14
#define E0_DIR_PIN PA0
#define E0_ENABLE_PIN PC3
#ifndef E0_CS_PIN
#define E0_CS_PIN PB3
#endif
#define E1_STEP_PIN PD15
#define E1_DIR_PIN PE7
#define E1_ENABLE_PIN PA3
#ifndef E1_CS_PIN
#define E1_CS_PIN PG15
#endif
#define E2_STEP_PIN PD13
#define E2_DIR_PIN PG9
#define E2_ENABLE_PIN PF0
#ifndef E2_CS_PIN
#define E2_CS_PIN PG12
#endif
//
// Software SPI pins for TMC2130 stepper drivers
//
#if ENABLED(TMC_USE_SW_SPI)
2019-07-07 20:48:25 +02:00
#ifndef TMC_SW_MOSI
#define TMC_SW_MOSI PC12
#endif
#ifndef TMC_SW_MISO
#define TMC_SW_MISO PC11
#endif
#ifndef TMC_SW_SCK
#define TMC_SW_SCK PC10
#endif
#endif
2019-07-09 05:59:51 +02:00
#if HAS_TMC220x
/**
2019-07-07 20:48:25 +02:00
* TMC2208/TMC2209 stepper drivers
*
* Hardware serial communication ports.
* If undefined software serial is used according to the pins below
*/
//#define X_HARDWARE_SERIAL Serial
//#define X2_HARDWARE_SERIAL Serial1
//#define Y_HARDWARE_SERIAL Serial1
//#define Y2_HARDWARE_SERIAL Serial1
//#define Z_HARDWARE_SERIAL Serial1
//#define Z2_HARDWARE_SERIAL Serial1
//#define E0_HARDWARE_SERIAL Serial1
//#define E1_HARDWARE_SERIAL Serial1
//#define E2_HARDWARE_SERIAL Serial1
//#define E3_HARDWARE_SERIAL Serial1
//#define E4_HARDWARE_SERIAL Serial1
//
// Software serial
//
#define X_SERIAL_TX_PIN PC13
#define X_SERIAL_RX_PIN PC13
#define Y_SERIAL_TX_PIN PE3
#define Y_SERIAL_RX_PIN PE3
#define Z_SERIAL_TX_PIN PE1
#define Z_SERIAL_RX_PIN PE1
#define E0_SERIAL_TX_PIN PD4
#define E0_SERIAL_RX_PIN PD4
#define E1_SERIAL_TX_PIN PD1
#define E1_SERIAL_RX_PIN PD1
#define E2_SERIAL_TX_PIN PD6
#define E2_SERIAL_RX_PIN PD6
#endif
//
// Temperature Sensors
//
#define TEMP_0_PIN PF4 // T1 <-> E0
#define TEMP_1_PIN PF5 // T2 <-> E1
#define TEMP_2_PIN PF6 // T3 <-> E2
#define TEMP_BED_PIN PF3 // T0 <-> Bed
//
// Heaters / Fans
//
#define HEATER_0_PIN PB1 // Heater0
#define HEATER_1_PIN PD14 // Heater1
#define HEATER_2_PIN PB0 // Heater1
#define HEATER_BED_PIN PD12 // Hotbed
#define FAN_PIN PC8 // Fan0
#define FAN1_PIN PE5 // Fan1
#define FAN2_PIN PE6 // Fan2
//
// Misc. Functions
//
#define SDSS PB12
2019-07-07 20:48:25 +02:00
/**
* _____ _____
* NC | · · | GND 5V | · · | GND
* RESET | · · | PF12(SD_DETECT) (LCD_D7) PG7 | · · | PG6 (LCD_D6)
* (MOSI)PB15 | · · | PF11(BTN_EN2) (LCD_D5) PG3 | · · | PG2 (LCD_D4)
* (SD_SS)PB12 | · · | PG10(BTN_EN1) (LCD_RS) PD10 | · · | PD11 (LCD_EN)
* (SCK)PB13 | · · | PB14(MISO) (BTN_ENC) PA8 | · · | PG4 (BEEPER)
*
* EXP2 EXP1
*/
//
// LCDs and Controllers
//
#if HAS_SPI_LCD
#define BEEPER_PIN PG4
#define BTN_ENC PA8
#if ENABLED(CR10_STOCKDISPLAY)
#define LCD_PINS_RS PG6
#define BTN_EN1 PD11
#define BTN_EN2 PG2
#define LCD_PINS_ENABLE PG7
#define LCD_PINS_D4 PG3
#else
#define LCD_PINS_RS PD10
#define BTN_EN1 PG10
#define BTN_EN2 PF11
#define SD_DETECT_PIN PF12
#define LCD_SDSS PB12
#define LCD_PINS_ENABLE PD11
#define LCD_PINS_D4 PG2
#if ENABLED(ULTIPANEL)
#define LCD_PINS_D5 PG3
#define LCD_PINS_D6 PG6
#define LCD_PINS_D7 PG7
#endif
#endif
// Alter timing for graphical display
#if HAS_GRAPHICAL_LCD
#ifndef ST7920_DELAY_1
#define ST7920_DELAY_1 DELAY_NS(96)
#endif
#ifndef ST7920_DELAY_2
#define ST7920_DELAY_2 DELAY_NS(48)
#endif
#ifndef ST7920_DELAY_3
#define ST7920_DELAY_3 DELAY_NS(600)
#endif
#endif
#endif // HAS_SPI_LCD