Fixed lookup table bug.

This commit is contained in:
Erik van der Zalm 2011-08-15 19:26:40 +02:00
parent 5a1787b2f4
commit 0024a26ccf

View file

@ -33,7 +33,7 @@
#include "Marlin.h"
#include "speed_lookuptable.h"
char version_string[] = "0.9.1";
char version_string[] = "0.9.2";
#ifdef SDSUPPORT
#include "SdFat.h"
@ -1163,8 +1163,8 @@ void calculate_trapezoid_for_block(block_t *block, float entry_speed, float exit
#endif // ADVANCE
// Limit minimal step rate (Otherwise the timer will overflow.)
if(initial_rate <32) initial_rate=32;
if(final_rate < 32) final_rate=32;
if(initial_rate <120) initial_rate=120;
if(final_rate < 120) final_rate=120;
// Calculate the acceleration steps
long acceleration = block->acceleration;
@ -1213,10 +1213,9 @@ inline float max_allowable_speed(float acceleration, float target_velocity, floa
// velocities of the respective blocks.
inline float junction_jerk(block_t *before, block_t *after) {
return(sqrt(
pow((before->speed_x-after->speed_x), 2)+
pow((before->speed_x-after->speed_x), 2)+
pow((before->speed_y-after->speed_y), 2)+
pow((before->speed_z-after->speed_z)*axis_steps_per_unit[Z_AXIS]/axis_steps_per_unit[X_AXIS], 2))
);
pow((before->speed_z-after->speed_z)*axis_steps_per_unit[Z_AXIS]/axis_steps_per_unit[X_AXIS], 2)));
}
// Return the safe speed which is max_jerk/2, e.g. the
@ -1494,7 +1493,7 @@ void plan_buffer_line(float x, float y, float z, float e, float feed_rate) {
block->nominal_speed = block->millimeters * multiplier;
block->nominal_rate = ceil(block->step_event_count * multiplier / 60);
if(block->nominal_rate < 32) block->nominal_rate = 32;
if(block->nominal_rate < 120) block->nominal_rate = 120;
block->entry_speed = safe_speed(block);
// Compute the acceleration rate for the trapezoid generator.
@ -1603,7 +1602,7 @@ asm volatile ( \
"d" (charIn1), \
"d" (intIn2) \
: \
"r26" , "r27" \
"r26" \
)
// intRes = longIn1 * longIn2 >> 24
@ -1670,7 +1669,7 @@ static short old_advance = 0;
static short e_steps;
static unsigned char busy = false; // TRUE when SIG_OUTPUT_COMPARE1A is being serviced. Used to avoid retriggering that handler.
static long acceleration_time, deceleration_time;
static long accelerate_until, decelerate_after, acceleration_rate, initial_rate, final_rate;
static long accelerate_until, decelerate_after, acceleration_rate, initial_rate, final_rate, nominal_rate;
static unsigned short acc_step_rate; // needed for deccelaration start point
@ -1700,7 +1699,7 @@ inline unsigned short calc_timer(unsigned short step_rate) {
unsigned short timer;
if(step_rate < 32) step_rate = 32;
step_rate -= 32; // Correct for minimal speed
if(step_rate > (8*256)){ // higher step rate
if(step_rate >= (8*256)){ // higher step rate
unsigned short table_address = (unsigned short)&speed_lookuptable_fast[(unsigned char)(step_rate>>8)][0];
unsigned char tmp_step_rate = (step_rate & 0x00ff);
unsigned short gain = (unsigned short)pgm_read_word_near(table_address+2);
@ -1725,6 +1724,7 @@ inline void trapezoid_generator_reset() {
acceleration_rate = current_block->acceleration_rate;
initial_rate = current_block->initial_rate;
final_rate = current_block->final_rate;
nominal_rate = current_block->nominal_rate;
advance = current_block->initial_advance;
final_advance = current_block->final_advance;
deceleration_time = 0;
@ -1864,8 +1864,8 @@ ISR(TIMER1_COMPA_vect)
acc_step_rate += initial_rate;
// upper limit
if(acc_step_rate > current_block->nominal_rate)
acc_step_rate = current_block->nominal_rate;
if(acc_step_rate > nominal_rate)
acc_step_rate = nominal_rate;
// step_rate to timer interval
timer = calc_timer(acc_step_rate);
@ -1873,7 +1873,7 @@ ISR(TIMER1_COMPA_vect)
acceleration_time += timer;
OCR1A = timer;
}
else if (step_events_completed > decelerate_after) {
else if (step_events_completed >= decelerate_after) {
MultiU24X24toH16(step_rate, deceleration_time, acceleration_rate);
if(step_rate > acc_step_rate) { // Check step_rate stays positive