From 00c83e9ca64edec54e5352e8bfedd41cba02765d Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Wed, 1 Jan 2020 19:41:23 -0600 Subject: [PATCH] Update comments re: NOZZLE_AS_PROBE --- Marlin/Configuration.h | 3 ++- Marlin/Configuration_adv.h | 3 ++- config/default/Configuration.h | 3 ++- config/default/Configuration_adv.h | 3 ++- config/examples/3DFabXYZ/Migbot/Configuration.h | 3 ++- config/examples/3DFabXYZ/Migbot/Configuration_adv.h | 3 ++- config/examples/ADIMLab/Gantry v1/Configuration.h | 3 ++- config/examples/ADIMLab/Gantry v1/Configuration_adv.h | 3 ++- config/examples/ADIMLab/Gantry v2/Configuration.h | 3 ++- config/examples/ADIMLab/Gantry v2/Configuration_adv.h | 3 ++- config/examples/AlephObjects/TAZ4/Configuration.h | 3 ++- config/examples/AlephObjects/TAZ4/Configuration_adv.h | 3 ++- config/examples/Alfawise/U20-bltouch/Configuration.h | 3 ++- config/examples/Alfawise/U20-bltouch/Configuration_adv.h | 3 ++- config/examples/Alfawise/U20/Configuration.h | 3 ++- config/examples/Alfawise/U20/Configuration_adv.h | 3 ++- config/examples/AliExpress/CL-260/Configuration.h | 3 ++- config/examples/AliExpress/UM2pExt/Configuration.h | 3 ++- config/examples/AliExpress/UM2pExt/Configuration_adv.h | 3 ++- config/examples/Anet/A2/Configuration.h | 3 ++- config/examples/Anet/A2/Configuration_adv.h | 3 ++- config/examples/Anet/A2plus/Configuration.h | 3 ++- config/examples/Anet/A2plus/Configuration_adv.h | 3 ++- config/examples/Anet/A6/Configuration.h | 3 ++- config/examples/Anet/A6/Configuration_adv.h | 3 ++- config/examples/Anet/A8/Configuration.h | 3 ++- config/examples/Anet/A8/Configuration_adv.h | 3 ++- config/examples/Anet/A8plus/Configuration.h | 3 ++- config/examples/Anet/A8plus/Configuration_adv.h | 3 ++- config/examples/Anet/E16/Configuration.h | 3 ++- config/examples/Anet/E16/Configuration_adv.h | 3 ++- config/examples/AnyCubic/i3/Configuration.h | 3 ++- config/examples/AnyCubic/i3/Configuration_adv.h | 3 ++- config/examples/ArmEd/Configuration.h | 3 ++- config/examples/ArmEd/Configuration_adv.h | 3 ++- config/examples/Azteeg/X5GT/Configuration.h | 3 ++- config/examples/BIBO/TouchX/cyclops/Configuration.h | 3 ++- config/examples/BIBO/TouchX/cyclops/Configuration_adv.h | 3 ++- config/examples/BIBO/TouchX/default/Configuration.h | 3 ++- config/examples/BIBO/TouchX/default/Configuration_adv.h | 3 ++- config/examples/BQ/Hephestos/Configuration.h | 3 ++- config/examples/BQ/Hephestos/Configuration_adv.h | 3 ++- config/examples/BQ/Hephestos_2/Configuration.h | 3 ++- config/examples/BQ/Hephestos_2/Configuration_adv.h | 3 ++- config/examples/BQ/WITBOX/Configuration.h | 3 ++- config/examples/BQ/WITBOX/Configuration_adv.h | 3 ++- config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration.h | 3 ++- .../examples/BigTreeTech/SKR Mini E3 1.0/Configuration_adv.h | 3 ++- config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration.h | 3 ++- .../examples/BigTreeTech/SKR Mini E3 1.2/Configuration_adv.h | 3 ++- config/examples/Cartesio/Configuration.h | 3 ++- config/examples/Cartesio/Configuration_adv.h | 3 ++- config/examples/Creality/CR-10/Configuration.h | 3 ++- config/examples/Creality/CR-10/Configuration_adv.h | 3 ++- config/examples/Creality/CR-10S/Configuration.h | 3 ++- config/examples/Creality/CR-10S/Configuration_adv.h | 3 ++- config/examples/Creality/CR-10_5S/Configuration.h | 3 ++- config/examples/Creality/CR-10_5S/Configuration_adv.h | 3 ++- config/examples/Creality/CR-10mini/Configuration.h | 3 ++- config/examples/Creality/CR-10mini/Configuration_adv.h | 3 ++- config/examples/Creality/CR-20 Pro/Configuration.h | 3 ++- config/examples/Creality/CR-20 Pro/Configuration_adv.h | 3 ++- config/examples/Creality/CR-20/Configuration.h | 3 ++- config/examples/Creality/CR-20/Configuration_adv.h | 3 ++- config/examples/Creality/CR-8/Configuration.h | 3 ++- config/examples/Creality/CR-8/Configuration_adv.h | 3 ++- config/examples/Creality/Ender-2/Configuration.h | 3 ++- config/examples/Creality/Ender-2/Configuration_adv.h | 3 ++- config/examples/Creality/Ender-3/Configuration.h | 3 ++- config/examples/Creality/Ender-3/Configuration_adv.h | 3 ++- config/examples/Creality/Ender-4/Configuration.h | 3 ++- config/examples/Creality/Ender-4/Configuration_adv.h | 3 ++- config/examples/Creality/Ender-5 Pro/Configuration.h | 3 ++- config/examples/Creality/Ender-5 Pro/Configuration_adv.h | 3 ++- config/examples/Creality/Ender-5/Configuration.h | 3 ++- config/examples/Creality/Ender-5/Configuration_adv.h | 3 ++- config/examples/Dagoma/Disco Ultimate/Configuration.h | 3 ++- config/examples/Dagoma/Disco Ultimate/Configuration_adv.h | 3 ++- .../examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h | 3 ++- .../EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h | 3 ++- config/examples/EXP3D/Imprimante multifonction/Configuration.h | 3 ++- .../EXP3D/Imprimante multifonction/Configuration_adv.h | 3 ++- config/examples/Einstart-S/Configuration.h | 3 ++- config/examples/Einstart-S/Configuration_adv.h | 3 ++- config/examples/FYSETC/AIO_II/Configuration.h | 3 ++- config/examples/FYSETC/AIO_II/Configuration_adv.h | 3 ++- config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h | 3 ++- config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h | 3 ++- config/examples/FYSETC/Cheetah 1.2/base/Configuration.h | 3 ++- config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h | 3 ++- config/examples/FYSETC/Cheetah/BLTouch/Configuration.h | 3 ++- config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h | 3 ++- config/examples/FYSETC/Cheetah/base/Configuration.h | 3 ++- config/examples/FYSETC/Cheetah/base/Configuration_adv.h | 3 ++- config/examples/FYSETC/F6_13/Configuration.h | 3 ++- config/examples/FYSETC/F6_13/Configuration_adv.h | 3 ++- config/examples/FYSETC/S6/Configuration.h | 3 ++- config/examples/FYSETC/S6/Configuration_adv.h | 3 ++- config/examples/Felix/DUAL/Configuration.h | 3 ++- config/examples/Felix/DUAL/Configuration_adv.h | 3 ++- config/examples/Felix/Single/Configuration.h | 3 ++- config/examples/Felix/Single/Configuration_adv.h | 3 ++- config/examples/FlashForge/CreatorPro/Configuration.h | 3 ++- config/examples/FlashForge/CreatorPro/Configuration_adv.h | 3 ++- config/examples/FolgerTech/i3-2020/Configuration.h | 3 ++- config/examples/FolgerTech/i3-2020/Configuration_adv.h | 3 ++- config/examples/Formbot/Raptor/Configuration.h | 3 ++- config/examples/Formbot/Raptor/Configuration_adv.h | 3 ++- config/examples/Formbot/T_Rex_2+/Configuration.h | 3 ++- config/examples/Formbot/T_Rex_2+/Configuration_adv.h | 3 ++- config/examples/Formbot/T_Rex_3/Configuration.h | 3 ++- config/examples/Formbot/T_Rex_3/Configuration_adv.h | 3 ++- config/examples/Geeetech/A10/Configuration.h | 3 ++- config/examples/Geeetech/A10/Configuration_adv.h | 3 ++- config/examples/Geeetech/A10D/Configuration.h | 3 ++- config/examples/Geeetech/A10D/Configuration_adv.h | 3 ++- config/examples/Geeetech/A10M/Configuration.h | 3 ++- config/examples/Geeetech/A10M/Configuration_adv.h | 3 ++- config/examples/Geeetech/A10T/Configuration.h | 3 ++- config/examples/Geeetech/A10T/Configuration_adv.h | 3 ++- config/examples/Geeetech/A20/Configuration.h | 3 ++- config/examples/Geeetech/A20/Configuration_adv.h | 3 ++- config/examples/Geeetech/A20M/Configuration.h | 3 ++- config/examples/Geeetech/A20M/Configuration_adv.h | 3 ++- config/examples/Geeetech/A20T/Configuration.h | 3 ++- config/examples/Geeetech/A20T/Configuration_adv.h | 3 ++- config/examples/Geeetech/A30/Configuration.h | 3 ++- config/examples/Geeetech/A30/Configuration_adv.h | 3 ++- config/examples/Geeetech/E180/Configuration.h | 3 ++- config/examples/Geeetech/E180/Configuration_adv.h | 3 ++- config/examples/Geeetech/GT2560/Configuration.h | 3 ++- config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h | 3 ++- config/examples/Geeetech/MeCreator2/Configuration.h | 3 ++- config/examples/Geeetech/MeCreator2/Configuration_adv.h | 3 ++- config/examples/Geeetech/PI3A PRO/Configuration.h | 3 ++- config/examples/Geeetech/PI3A PRO/Configuration_adv.h | 3 ++- .../examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h | 3 ++- .../examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h | 3 ++- config/examples/Geeetech/Prusa i3 Pro C/Configuration.h | 3 ++- config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h | 3 ++- config/examples/Geeetech/Prusa i3 Pro W/Configuration.h | 3 ++- config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h | 3 ++- config/examples/HMS434/Configuration.h | 3 ++- config/examples/HMS434/Configuration_adv.h | 3 ++- config/examples/Infitary/i3-M508/Configuration.h | 3 ++- config/examples/Infitary/i3-M508/Configuration_adv.h | 3 ++- config/examples/JGAurora/A1/Configuration.h | 3 ++- config/examples/JGAurora/A1/Configuration_adv.h | 3 ++- config/examples/JGAurora/A5/Configuration.h | 3 ++- config/examples/JGAurora/A5/Configuration_adv.h | 3 ++- config/examples/JGAurora/A5S/Configuration.h | 3 ++- config/examples/JGAurora/A5S/Configuration_adv.h | 3 ++- config/examples/MakerParts/Configuration.h | 3 ++- config/examples/MakerParts/Configuration_adv.h | 3 ++- config/examples/Malyan/M150/Configuration.h | 3 ++- config/examples/Malyan/M150/Configuration_adv.h | 3 ++- config/examples/Malyan/M200/Configuration.h | 3 ++- config/examples/Malyan/M200/Configuration_adv.h | 3 ++- config/examples/Micromake/C1/basic/Configuration.h | 3 ++- config/examples/Micromake/C1/enhanced/Configuration.h | 3 ++- config/examples/Micromake/C1/enhanced/Configuration_adv.h | 3 ++- config/examples/Mks/Robin/Configuration.h | 3 ++- config/examples/Mks/Robin/Configuration_adv.h | 3 ++- config/examples/Mks/Robin_Lite3/Configuration.h | 3 ++- config/examples/Mks/Robin_Pro/Configuration.h | 3 ++- config/examples/Mks/Sbase/Configuration.h | 3 ++- config/examples/Mks/Sbase/Configuration_adv.h | 3 ++- config/examples/Modix/Big60/Configuration.h | 3 ++- config/examples/Modix/Big60/Configuration_adv.h | 3 ++- config/examples/Printrbot/PrintrboardG2/Configuration.h | 3 ++- config/examples/RapideLite/RL200/Configuration.h | 3 ++- config/examples/RapideLite/RL200/Configuration_adv.h | 3 ++- config/examples/Renkforce/RF100/Configuration.h | 3 ++- config/examples/Renkforce/RF100/Configuration_adv.h | 3 ++- config/examples/Renkforce/RF100XL/Configuration.h | 3 ++- config/examples/Renkforce/RF100XL/Configuration_adv.h | 3 ++- config/examples/Renkforce/RF100v2/Configuration.h | 3 ++- config/examples/Renkforce/RF100v2/Configuration_adv.h | 3 ++- config/examples/RepRapPro/Huxley/Configuration.h | 3 ++- config/examples/RepRapWorld/Megatronics/Configuration.h | 3 ++- config/examples/RigidBot/Configuration.h | 3 ++- config/examples/RigidBot/Configuration_adv.h | 3 ++- config/examples/SCARA/MP_SCARA/Configuration.h | 3 ++- config/examples/SCARA/Morgan/Configuration.h | 3 ++- config/examples/SCARA/Morgan/Configuration_adv.h | 3 ++- config/examples/STM32/Black_STM32F407VET6/Configuration.h | 3 ++- config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h | 3 ++- config/examples/STM32/STM32F103RE/Configuration.h | 3 ++- config/examples/STM32/STM32F4/Configuration.h | 3 ++- config/examples/STM32/stm32f103ret6/Configuration.h | 3 ++- config/examples/Sanguinololu/Configuration.h | 3 ++- config/examples/Sanguinololu/Configuration_adv.h | 3 ++- config/examples/Tevo/Michelangelo/Configuration.h | 3 ++- config/examples/Tevo/Michelangelo/Configuration_adv.h | 3 ++- config/examples/Tevo/Nereus/Configuration.h | 3 ++- config/examples/Tevo/Nereus/Configuration_adv.h | 3 ++- config/examples/Tevo/Tarantula Pro/Configuration.h | 3 ++- config/examples/Tevo/Tarantula Pro/Configuration_adv.h | 3 ++- config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h | 3 ++- config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h | 3 ++- config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h | 3 ++- .../examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h | 3 ++- config/examples/TheBorg/Configuration.h | 3 ++- config/examples/TheBorg/Configuration_adv.h | 3 ++- config/examples/TinyBoy2/Configuration.h | 3 ++- config/examples/TinyBoy2/Configuration_adv.h | 3 ++- config/examples/Tronxy/X1/Configuration.h | 3 ++- config/examples/Tronxy/X3A/Configuration.h | 3 ++- config/examples/Tronxy/X3A/Configuration_adv.h | 3 ++- config/examples/Tronxy/X5S-2E/Configuration.h | 3 ++- config/examples/Tronxy/X5S-2E/Configuration_adv.h | 3 ++- config/examples/Tronxy/X5S/Configuration.h | 3 ++- config/examples/Tronxy/XY100/Configuration.h | 3 ++- config/examples/UltiMachine/Archim1/Configuration.h | 3 ++- config/examples/UltiMachine/Archim1/Configuration_adv.h | 3 ++- config/examples/UltiMachine/Archim2/Configuration.h | 3 ++- config/examples/UltiMachine/Archim2/Configuration_adv.h | 3 ++- config/examples/VORONDesign/Configuration.h | 3 ++- config/examples/VORONDesign/Configuration_adv.h | 3 ++- config/examples/Velleman/K8200/Configuration.h | 3 ++- config/examples/Velleman/K8200/Configuration_adv.h | 3 ++- config/examples/Velleman/K8400/Dual-head/Configuration.h | 3 ++- config/examples/Velleman/K8400/Dual-head/Configuration_adv.h | 3 ++- config/examples/Velleman/K8400/Single-head/Configuration.h | 3 ++- config/examples/Velleman/K8400/Single-head/Configuration_adv.h | 3 ++- config/examples/WASP/PowerWASP/Configuration.h | 3 ++- config/examples/WASP/PowerWASP/Configuration_adv.h | 3 ++- config/examples/Wanhao/Duplicator 6/Configuration.h | 3 ++- config/examples/Wanhao/Duplicator 6/Configuration_adv.h | 3 ++- config/examples/Wanhao/Duplicator i3 2.1/Configuration.h | 3 ++- config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h | 3 ++- config/examples/Wanhao/Duplicator i3 Mini/Configuration.h | 3 ++- config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h | 3 ++- config/examples/adafruit/ST7565/Configuration.h | 3 ++- config/examples/delta/Anycubic/Kossel/Configuration.h | 3 ++- config/examples/delta/Anycubic/Kossel/Configuration_adv.h | 3 ++- config/examples/delta/Dreammaker/Overlord/Configuration.h | 3 ++- config/examples/delta/Dreammaker/Overlord/Configuration_adv.h | 3 ++- config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h | 3 ++- .../examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h | 3 ++- config/examples/delta/FLSUN/QQ-S/Configuration.h | 3 ++- config/examples/delta/FLSUN/QQ-S/Configuration_adv.h | 3 ++- config/examples/delta/FLSUN/auto_calibrate/Configuration.h | 3 ++- config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h | 3 ++- config/examples/delta/FLSUN/kossel/Configuration.h | 3 ++- config/examples/delta/FLSUN/kossel/Configuration_adv.h | 3 ++- config/examples/delta/FLSUN/kossel_mini/Configuration.h | 3 ++- config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h | 3 ++- config/examples/delta/Geeetech/Rostock 301/Configuration.h | 3 ++- config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h | 3 ++- config/examples/delta/Hatchbox_Alpha/Configuration.h | 3 ++- config/examples/delta/MKS/SBASE/Configuration.h | 3 ++- config/examples/delta/MKS/SBASE/Configuration_adv.h | 3 ++- config/examples/delta/Tevo Little Monster/Configuration.h | 3 ++- config/examples/delta/Tevo Little Monster/Configuration_adv.h | 3 ++- config/examples/delta/generic/Configuration.h | 3 ++- config/examples/delta/generic/Configuration_adv.h | 3 ++- config/examples/delta/kossel_clear/Configuration.h | 3 ++- config/examples/delta/kossel_clear/Configuration_adv.h | 3 ++- config/examples/delta/kossel_mini/Configuration.h | 3 ++- config/examples/delta/kossel_mini/Configuration_adv.h | 3 ++- config/examples/delta/kossel_pro/Configuration.h | 3 ++- config/examples/delta/kossel_xl/Configuration.h | 3 ++- config/examples/delta/kossel_xl/Configuration_adv.h | 3 ++- config/examples/gCreate/gMax1.5+/Configuration.h | 3 ++- config/examples/gCreate/gMax1.5+/Configuration_adv.h | 3 ++- config/examples/makibox/Configuration.h | 3 ++- config/examples/makibox/Configuration_adv.h | 3 ++- config/examples/tvrrug/Round2/Configuration.h | 3 ++- config/examples/tvrrug/Round2/Configuration_adv.h | 3 ++- config/examples/wt150/Configuration.h | 3 ++- config/examples/wt150/Configuration_adv.h | 3 ++- 272 files changed, 544 insertions(+), 272 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index e41bae29b..9e0970a56 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -929,7 +929,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 89fde4a38..51ae20c23 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/default/Configuration.h b/config/default/Configuration.h index e41bae29b..9e0970a56 100644 --- a/config/default/Configuration.h +++ b/config/default/Configuration.h @@ -929,7 +929,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index 89fde4a38..51ae20c23 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h index 54054be5a..d9f5d9668 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration.h @@ -936,7 +936,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 21, 61, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index fbeb98112..ec952a8c1 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h index ca1196d4a..fd7dc6fee 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration.h @@ -929,7 +929,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index c9040e7bf..d5533b386 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h index ff7426793..9a69fbbb1 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration.h @@ -929,7 +929,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index 31511845d..127751022 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/AlephObjects/TAZ4/Configuration.h b/config/examples/AlephObjects/TAZ4/Configuration.h index 03cf1366d..a986b7d7b 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration.h +++ b/config/examples/AlephObjects/TAZ4/Configuration.h @@ -949,7 +949,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h index 2307ec488..cb92db45f 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h index 973c199c5..748211698 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration.h @@ -993,7 +993,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { -35, -6, -0.5 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index ab7b26a07..92798c2ba 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -1440,7 +1440,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h index 90aa931ba..823fb06b3 100644 --- a/config/examples/Alfawise/U20/Configuration.h +++ b/config/examples/Alfawise/U20/Configuration.h @@ -993,7 +993,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index 8a2dc21c1..18171008a 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -1439,7 +1439,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h index 4d85f9394..1ca93f332 100644 --- a/config/examples/AliExpress/CL-260/Configuration.h +++ b/config/examples/AliExpress/CL-260/Configuration.h @@ -929,7 +929,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h index 8c2f8174f..83781dc78 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration.h +++ b/config/examples/AliExpress/UM2pExt/Configuration.h @@ -940,7 +940,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index f4ce89776..46dce0a02 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h index 4f87aa4db..a1f767564 100644 --- a/config/examples/Anet/A2/Configuration.h +++ b/config/examples/Anet/A2/Configuration.h @@ -929,7 +929,8 @@ */ //#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. //#define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index b0ab2e110..6f82cbd22 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h index 05a08af75..ce5e767b8 100644 --- a/config/examples/Anet/A2plus/Configuration.h +++ b/config/examples/Anet/A2plus/Configuration.h @@ -929,7 +929,8 @@ */ //#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. //#define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index b0ab2e110..6f82cbd22 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h index 57296bf11..6a04f1711 100644 --- a/config/examples/Anet/A6/Configuration.h +++ b/config/examples/Anet/A6/Configuration.h @@ -983,7 +983,8 @@ // (mount: https://github.com/ralf-e/ANET_A6_modifications/tree/master/A6_X-Axis) //#define NOZZLE_TO_PROBE_OFFSET { -30, 15, 0.75 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index 7b79eced0..db52dc084 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h index a6098e47f..8d4644aa2 100644 --- a/config/examples/Anet/A8/Configuration.h +++ b/config/examples/Anet/A8/Configuration.h @@ -942,7 +942,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index bef18b4cb..81bcc7d90 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h index d88ef28e1..50a01a862 100644 --- a/config/examples/Anet/A8plus/Configuration.h +++ b/config/examples/Anet/A8plus/Configuration.h @@ -940,7 +940,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index e801585f6..0e34f1537 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Anet/E16/Configuration.h b/config/examples/Anet/E16/Configuration.h index c6ffb0580..111b9c864 100644 --- a/config/examples/Anet/E16/Configuration.h +++ b/config/examples/Anet/E16/Configuration.h @@ -941,7 +941,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Anet/E16/Configuration_adv.h b/config/examples/Anet/E16/Configuration_adv.h index 8bb24ed2a..7a915181e 100644 --- a/config/examples/Anet/E16/Configuration_adv.h +++ b/config/examples/Anet/E16/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h index 3e14bc221..46719efdf 100644 --- a/config/examples/AnyCubic/i3/Configuration.h +++ b/config/examples/AnyCubic/i3/Configuration.h @@ -939,7 +939,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 75, 5, -2 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index ad0564a31..3aff8fb86 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h index f53945276..fe3283a26 100644 --- a/config/examples/ArmEd/Configuration.h +++ b/config/examples/ArmEd/Configuration.h @@ -930,7 +930,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index 8f09133d4..fd7c29e88 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -1442,7 +1442,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h index 9730e1e2f..187c408d2 100644 --- a/config/examples/Azteeg/X5GT/Configuration.h +++ b/config/examples/Azteeg/X5GT/Configuration.h @@ -929,7 +929,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h index 10dc544f0..e20bc5a51 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -929,7 +929,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 9076a6c1d..483ff61e3 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h index 14fbb2272..484d5efe0 100644 --- a/config/examples/BIBO/TouchX/default/Configuration.h +++ b/config/examples/BIBO/TouchX/default/Configuration.h @@ -929,7 +929,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index 28fb50d58..a89a2ab7b 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h index d907a758b..5c599d4b4 100644 --- a/config/examples/BQ/Hephestos/Configuration.h +++ b/config/examples/BQ/Hephestos/Configuration.h @@ -917,7 +917,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index 97a7af0cb..b7f19ea10 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h index 5865eee9b..a8334abaa 100644 --- a/config/examples/BQ/Hephestos_2/Configuration.h +++ b/config/examples/BQ/Hephestos_2/Configuration.h @@ -930,7 +930,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 34, 15, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index 778cf9589..1f56fdbe6 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -1446,7 +1446,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h index f42956985..cf6a074c2 100644 --- a/config/examples/BQ/WITBOX/Configuration.h +++ b/config/examples/BQ/WITBOX/Configuration.h @@ -917,7 +917,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index 97a7af0cb..b7f19ea10 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration.h b/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration.h index 54973430e..4df81eb6c 100644 --- a/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration.h +++ b/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration.h @@ -921,7 +921,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration_adv.h b/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration_adv.h index 911d52349..57bffc921 100644 --- a/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration.h b/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration.h index 431f52ec5..3bcdcbde5 100644 --- a/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration.h +++ b/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration.h @@ -922,7 +922,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration_adv.h b/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration_adv.h index 9a96777d0..241e7df6c 100644 --- a/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h index ebd70b015..4f3bd706f 100644 --- a/config/examples/Cartesio/Configuration.h +++ b/config/examples/Cartesio/Configuration.h @@ -928,7 +928,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index f66fa1892..c1cafc135 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Creality/CR-10/Configuration.h b/config/examples/Creality/CR-10/Configuration.h index 86589445f..d72ae0b94 100644 --- a/config/examples/Creality/CR-10/Configuration.h +++ b/config/examples/Creality/CR-10/Configuration.h @@ -939,7 +939,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Creality/CR-10/Configuration_adv.h b/config/examples/Creality/CR-10/Configuration_adv.h index 51c846e4b..c2f1070f3 100644 --- a/config/examples/Creality/CR-10/Configuration_adv.h +++ b/config/examples/Creality/CR-10/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Creality/CR-10S/Configuration.h b/config/examples/Creality/CR-10S/Configuration.h index 6d188f4ba..580dfb846 100644 --- a/config/examples/Creality/CR-10S/Configuration.h +++ b/config/examples/Creality/CR-10S/Configuration.h @@ -929,7 +929,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Creality/CR-10S/Configuration_adv.h b/config/examples/Creality/CR-10S/Configuration_adv.h index d230c148b..8e7af2eb8 100644 --- a/config/examples/Creality/CR-10S/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Creality/CR-10_5S/Configuration.h b/config/examples/Creality/CR-10_5S/Configuration.h index 6bde73107..855c96a7a 100644 --- a/config/examples/Creality/CR-10_5S/Configuration.h +++ b/config/examples/Creality/CR-10_5S/Configuration.h @@ -930,7 +930,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Creality/CR-10_5S/Configuration_adv.h b/config/examples/Creality/CR-10_5S/Configuration_adv.h index e33311c9f..2598d813e 100644 --- a/config/examples/Creality/CR-10_5S/Configuration_adv.h +++ b/config/examples/Creality/CR-10_5S/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Creality/CR-10mini/Configuration.h b/config/examples/Creality/CR-10mini/Configuration.h index 4a9be92f4..60f69a431 100644 --- a/config/examples/Creality/CR-10mini/Configuration.h +++ b/config/examples/Creality/CR-10mini/Configuration.h @@ -948,7 +948,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Creality/CR-10mini/Configuration_adv.h b/config/examples/Creality/CR-10mini/Configuration_adv.h index 8c6a5230a..b94c9506a 100644 --- a/config/examples/Creality/CR-10mini/Configuration_adv.h +++ b/config/examples/Creality/CR-10mini/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h index 81754fe1c..628820bf3 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration.h +++ b/config/examples/Creality/CR-20 Pro/Configuration.h @@ -933,7 +933,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index 32499d22f..1a075bd68 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Creality/CR-20/Configuration.h b/config/examples/Creality/CR-20/Configuration.h index e92218aee..b92ba8e54 100644 --- a/config/examples/Creality/CR-20/Configuration.h +++ b/config/examples/Creality/CR-20/Configuration.h @@ -933,7 +933,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h index 3e89bfe44..83f3eaa9d 100644 --- a/config/examples/Creality/CR-20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h index 30da9c006..1630b2cde 100644 --- a/config/examples/Creality/CR-8/Configuration.h +++ b/config/examples/Creality/CR-8/Configuration.h @@ -939,7 +939,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index 8281a0e3c..863aaf71f 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h index 7733dbde6..d0dd66108 100644 --- a/config/examples/Creality/Ender-2/Configuration.h +++ b/config/examples/Creality/Ender-2/Configuration.h @@ -933,7 +933,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index c64a3f138..8889d5aff 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Creality/Ender-3/Configuration.h b/config/examples/Creality/Ender-3/Configuration.h index b30dd1b80..4734c6550 100644 --- a/config/examples/Creality/Ender-3/Configuration.h +++ b/config/examples/Creality/Ender-3/Configuration.h @@ -933,7 +933,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Creality/Ender-3/Configuration_adv.h b/config/examples/Creality/Ender-3/Configuration_adv.h index 947c96271..8b2d5d8df 100644 --- a/config/examples/Creality/Ender-3/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h index 2e59277b4..9cc53f824 100644 --- a/config/examples/Creality/Ender-4/Configuration.h +++ b/config/examples/Creality/Ender-4/Configuration.h @@ -939,7 +939,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index be06c5f33..17b3450e6 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Creality/Ender-5 Pro/Configuration.h b/config/examples/Creality/Ender-5 Pro/Configuration.h index 29cf2b18a..b3585bf2c 100644 --- a/config/examples/Creality/Ender-5 Pro/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/Configuration.h @@ -927,7 +927,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Creality/Ender-5 Pro/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/Configuration_adv.h index 8e75e806f..a102d6aa3 100644 --- a/config/examples/Creality/Ender-5 Pro/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Creality/Ender-5/Configuration.h b/config/examples/Creality/Ender-5/Configuration.h index 517c4c825..d23b4d551 100644 --- a/config/examples/Creality/Ender-5/Configuration.h +++ b/config/examples/Creality/Ender-5/Configuration.h @@ -933,7 +933,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Creality/Ender-5/Configuration_adv.h b/config/examples/Creality/Ender-5/Configuration_adv.h index bff7e382d..92fec78d3 100644 --- a/config/examples/Creality/Ender-5/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h index ac83ae9ba..0c818a2a1 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h @@ -929,7 +929,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 0, 21, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index 65d392c08..8a3cdf75a 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h index 9193daa2b..5ac11ac49 100644 --- a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h +++ b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h @@ -934,7 +934,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h index 6ef3ec764..80410efa4 100755 --- a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h +++ b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration.h b/config/examples/EXP3D/Imprimante multifonction/Configuration.h index b6746dc28..2e3beb748 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration.h @@ -929,7 +929,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 0 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index dc48787b4..8313186c4 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h index e1245dd06..4646cbe14 100644 --- a/config/examples/Einstart-S/Configuration.h +++ b/config/examples/Einstart-S/Configuration.h @@ -939,7 +939,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index e6e0f0666..373f22a6e 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/FYSETC/AIO_II/Configuration.h b/config/examples/FYSETC/AIO_II/Configuration.h index d725f8959..d66b1c869 100644 --- a/config/examples/FYSETC/AIO_II/Configuration.h +++ b/config/examples/FYSETC/AIO_II/Configuration.h @@ -934,7 +934,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index 2b7642513..146a35b1b 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h index 501bf8841..ed4cd1b40 100644 --- a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h +++ b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h @@ -934,7 +934,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { -44, -6, -3.9 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h index 13d10b475..d5ed737b2 100644 --- a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h b/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h index d8bdebb88..3a075d3b6 100644 --- a/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h +++ b/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h @@ -934,7 +934,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h b/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h index 13d10b475..d5ed737b2 100644 --- a/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h b/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h index fcc6f6c1c..dec2d7044 100644 --- a/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h +++ b/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h @@ -934,7 +934,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { -44, -6, -3.9 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h index 13d10b475..d5ed737b2 100644 --- a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/FYSETC/Cheetah/base/Configuration.h b/config/examples/FYSETC/Cheetah/base/Configuration.h index 22d0f73a4..f32e75f40 100644 --- a/config/examples/FYSETC/Cheetah/base/Configuration.h +++ b/config/examples/FYSETC/Cheetah/base/Configuration.h @@ -934,7 +934,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h index 13d10b475..d5ed737b2 100644 --- a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h +++ b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/FYSETC/F6_13/Configuration.h b/config/examples/FYSETC/F6_13/Configuration.h index 7dc08fa84..4cbe4ffb2 100644 --- a/config/examples/FYSETC/F6_13/Configuration.h +++ b/config/examples/FYSETC/F6_13/Configuration.h @@ -931,7 +931,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index c53fe62c8..617206e8b 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/FYSETC/S6/Configuration.h b/config/examples/FYSETC/S6/Configuration.h index 6fbb938eb..81c021b68 100644 --- a/config/examples/FYSETC/S6/Configuration.h +++ b/config/examples/FYSETC/S6/Configuration.h @@ -929,7 +929,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index 89fde4a38..51ae20c23 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h index abaca53b5..1c1965be6 100644 --- a/config/examples/Felix/DUAL/Configuration.h +++ b/config/examples/Felix/DUAL/Configuration.h @@ -910,7 +910,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index 11fd99204..822ebca19 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Felix/Single/Configuration.h b/config/examples/Felix/Single/Configuration.h index aadea5c3c..665886a07 100644 --- a/config/examples/Felix/Single/Configuration.h +++ b/config/examples/Felix/Single/Configuration.h @@ -910,7 +910,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index 11fd99204..822ebca19 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h index d8b48ef8a..842f80e0d 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration.h +++ b/config/examples/FlashForge/CreatorPro/Configuration.h @@ -921,7 +921,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index 4c111fb16..2346360a0 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -1437,7 +1437,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h index 7d17d2c4c..601eb00a1 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/config/examples/FolgerTech/i3-2020/Configuration.h @@ -935,7 +935,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 38, -7, -10.75 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 0 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index c0b1b9cd3..963b7f0d4 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h index 7b76169c3..f764ec62b 100644 --- a/config/examples/Formbot/Raptor/Configuration.h +++ b/config/examples/Formbot/Raptor/Configuration.h @@ -1014,7 +1014,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { -22, 0, -1.5 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index e680b81a2..9768e27f0 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -1440,7 +1440,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h index 1e04fd26c..ba078cf84 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration.h @@ -958,7 +958,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { -3, 31, -1.25 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 0 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index 61d538e4a..c18ffb21d 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -1442,7 +1442,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h index 271d3958a..c45a5f17c 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration.h +++ b/config/examples/Formbot/T_Rex_3/Configuration.h @@ -941,7 +941,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { -3, 31, -1.25 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 0 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index 4e27267d5..defa20c81 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -1442,7 +1442,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h index 22043fb3e..3d39a4560 100644 --- a/config/examples/Geeetech/A10/Configuration.h +++ b/config/examples/Geeetech/A10/Configuration.h @@ -912,7 +912,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index f3bcef140..40a0d675c 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Geeetech/A10D/Configuration.h b/config/examples/Geeetech/A10D/Configuration.h index 934ac4b83..7aa308fc1 100644 --- a/config/examples/Geeetech/A10D/Configuration.h +++ b/config/examples/Geeetech/A10D/Configuration.h @@ -911,7 +911,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { -37, 0, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index e68ffbc5b..4920c8a17 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Geeetech/A10M/Configuration.h b/config/examples/Geeetech/A10M/Configuration.h index 99573fd62..77d1a023f 100644 --- a/config/examples/Geeetech/A10M/Configuration.h +++ b/config/examples/Geeetech/A10M/Configuration.h @@ -912,7 +912,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h index 6158b609e..1cba9d040 100644 --- a/config/examples/Geeetech/A10M/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Geeetech/A10T/Configuration.h b/config/examples/Geeetech/A10T/Configuration.h index b22f80bb5..784227680 100644 --- a/config/examples/Geeetech/A10T/Configuration.h +++ b/config/examples/Geeetech/A10T/Configuration.h @@ -912,7 +912,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Geeetech/A10T/Configuration_adv.h b/config/examples/Geeetech/A10T/Configuration_adv.h index 6158b609e..1cba9d040 100644 --- a/config/examples/Geeetech/A10T/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Geeetech/A20/Configuration.h b/config/examples/Geeetech/A20/Configuration.h index 342994f57..602194fca 100644 --- a/config/examples/Geeetech/A20/Configuration.h +++ b/config/examples/Geeetech/A20/Configuration.h @@ -912,7 +912,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index 7d7100f3a..2e77874ea 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h index ca65f4fcb..73e0ecf51 100644 --- a/config/examples/Geeetech/A20M/Configuration.h +++ b/config/examples/Geeetech/A20M/Configuration.h @@ -912,7 +912,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index 7d7100f3a..2e77874ea 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Geeetech/A20T/Configuration.h b/config/examples/Geeetech/A20T/Configuration.h index 62a4f4ef4..84196e64c 100644 --- a/config/examples/Geeetech/A20T/Configuration.h +++ b/config/examples/Geeetech/A20T/Configuration.h @@ -912,7 +912,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index 7d7100f3a..2e77874ea 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Geeetech/A30/Configuration.h b/config/examples/Geeetech/A30/Configuration.h index 81ea4e870..e9f07218b 100644 --- a/config/examples/Geeetech/A30/Configuration.h +++ b/config/examples/Geeetech/A30/Configuration.h @@ -912,7 +912,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 0 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index 11d193e02..23311fe25 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Geeetech/E180/Configuration.h b/config/examples/Geeetech/E180/Configuration.h index e020ccdfb..fca5dbbcc 100644 --- a/config/examples/Geeetech/E180/Configuration.h +++ b/config/examples/Geeetech/E180/Configuration.h @@ -913,7 +913,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 0 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index 11d193e02..23311fe25 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h index 0ec1d6fc9..8dcfd79c4 100644 --- a/config/examples/Geeetech/GT2560/Configuration.h +++ b/config/examples/Geeetech/GT2560/Configuration.h @@ -944,7 +944,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index 0d39fd91a..2cebcdb49 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -929,7 +929,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 8 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h index f944c82e3..38da8c250 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration.h +++ b/config/examples/Geeetech/MeCreator2/Configuration.h @@ -936,7 +936,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index d154552b8..f8872120f 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -1437,7 +1437,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Geeetech/PI3A PRO/Configuration.h b/config/examples/Geeetech/PI3A PRO/Configuration.h index bc7c82647..340a9e2ae 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration.h @@ -950,7 +950,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index 8dd178b0d..a2e5c5767 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index 3c53510e9..3605b83d4 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -950,7 +950,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 4, -44, -1.4 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index 9c955f3d4..5dae8bb14 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -949,7 +949,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h index 5d0ed7e3b..43a103be1 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h @@ -929,7 +929,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index f3bcef140..40a0d675c 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h index 9fd9cb1ae..b3a64b82b 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h @@ -929,7 +929,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index f3bcef140..40a0d675c 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/HMS434/Configuration.h b/config/examples/HMS434/Configuration.h index 675144aab..5b809268f 100644 --- a/config/examples/HMS434/Configuration.h +++ b/config/examples/HMS434/Configuration.h @@ -918,7 +918,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { -21, 22, -1.54 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 20 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index a3fd04a20..ccf39ea4c 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -1430,7 +1430,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h index fd631d176..869c99a0b 100644 --- a/config/examples/Infitary/i3-M508/Configuration.h +++ b/config/examples/Infitary/i3-M508/Configuration.h @@ -933,7 +933,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index 881f36690..a0d1e7dc0 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h index d75903b33..9c7a045a2 100644 --- a/config/examples/JGAurora/A1/Configuration.h +++ b/config/examples/JGAurora/A1/Configuration.h @@ -936,7 +936,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index 8ee59d4a5..64e76346f 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -1443,7 +1443,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h index 39480ec57..ebd162057 100644 --- a/config/examples/JGAurora/A5/Configuration.h +++ b/config/examples/JGAurora/A5/Configuration.h @@ -941,7 +941,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index b295d41f8..ebe19b2af 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h index 0539ced6b..722e3de8e 100644 --- a/config/examples/JGAurora/A5S/Configuration.h +++ b/config/examples/JGAurora/A5S/Configuration.h @@ -936,7 +936,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index 8ee59d4a5..64e76346f 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -1443,7 +1443,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h index f9f771489..1f8bd2286 100644 --- a/config/examples/MakerParts/Configuration.h +++ b/config/examples/MakerParts/Configuration.h @@ -929,7 +929,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index 75069ef05..5c63176b9 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h index 184496256..24e3d9974 100644 --- a/config/examples/Malyan/M150/Configuration.h +++ b/config/examples/Malyan/M150/Configuration.h @@ -953,7 +953,8 @@ // Note: HoolyHoo mount is X=35, Y=-50. //#define NOZZLE_TO_PROBE_OFFSET { 35, -50, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index b759f4663..42bc1e48d 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h index 7b33b8831..b15aa6cdd 100644 --- a/config/examples/Malyan/M200/Configuration.h +++ b/config/examples/Malyan/M200/Configuration.h @@ -939,7 +939,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index 3e582f616..d9063388d 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -1440,7 +1440,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h index e805a3d90..84dee1ac2 100644 --- a/config/examples/Micromake/C1/basic/Configuration.h +++ b/config/examples/Micromake/C1/basic/Configuration.h @@ -933,7 +933,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h index cf1088329..a77ee6809 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/config/examples/Micromake/C1/enhanced/Configuration.h @@ -933,7 +933,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index 83058f817..1828ea598 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h index cafdcc977..576825c46 100644 --- a/config/examples/Mks/Robin/Configuration.h +++ b/config/examples/Mks/Robin/Configuration.h @@ -930,7 +930,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index a4df446ff..b23092151 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Mks/Robin_Lite3/Configuration.h b/config/examples/Mks/Robin_Lite3/Configuration.h index 6bb626809..52c3efd7f 100644 --- a/config/examples/Mks/Robin_Lite3/Configuration.h +++ b/config/examples/Mks/Robin_Lite3/Configuration.h @@ -936,7 +936,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Mks/Robin_Pro/Configuration.h b/config/examples/Mks/Robin_Pro/Configuration.h index 6b9895a24..987023b17 100644 --- a/config/examples/Mks/Robin_Pro/Configuration.h +++ b/config/examples/Mks/Robin_Pro/Configuration.h @@ -935,7 +935,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h index e98821c76..e27654746 100644 --- a/config/examples/Mks/Sbase/Configuration.h +++ b/config/examples/Mks/Sbase/Configuration.h @@ -928,7 +928,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 32, 5, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index 1790b4f6b..744836a82 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -1439,7 +1439,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Modix/Big60/Configuration.h b/config/examples/Modix/Big60/Configuration.h index 82012b277..5b5122b79 100644 --- a/config/examples/Modix/Big60/Configuration.h +++ b/config/examples/Modix/Big60/Configuration.h @@ -928,7 +928,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { -34, 26, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index 3e95e55eb..9b1556c4c 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h index 41585db1e..de8355b47 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h @@ -934,7 +934,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h index 10e8e08b3..e83e9d3ba 100644 --- a/config/examples/RapideLite/RL200/Configuration.h +++ b/config/examples/RapideLite/RL200/Configuration.h @@ -929,7 +929,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index c59a51040..381376a7c 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Renkforce/RF100/Configuration.h b/config/examples/Renkforce/RF100/Configuration.h index 59525cb6e..eb6685917 100644 --- a/config/examples/Renkforce/RF100/Configuration.h +++ b/config/examples/Renkforce/RF100/Configuration.h @@ -937,7 +937,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index f0a0214ce..90a6b0642 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Renkforce/RF100XL/Configuration.h b/config/examples/Renkforce/RF100XL/Configuration.h index b12d288a5..92ccdc589 100644 --- a/config/examples/Renkforce/RF100XL/Configuration.h +++ b/config/examples/Renkforce/RF100XL/Configuration.h @@ -937,7 +937,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index f0a0214ce..90a6b0642 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Renkforce/RF100v2/Configuration.h b/config/examples/Renkforce/RF100v2/Configuration.h index e53e7a636..23e33076e 100644 --- a/config/examples/Renkforce/RF100v2/Configuration.h +++ b/config/examples/Renkforce/RF100v2/Configuration.h @@ -937,7 +937,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index f0a0214ce..90a6b0642 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h index ab0923ed5..97faab78f 100644 --- a/config/examples/RepRapPro/Huxley/Configuration.h +++ b/config/examples/RepRapPro/Huxley/Configuration.h @@ -969,7 +969,8 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h index 62e0980fa..300098a0b 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -929,7 +929,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h index 0eb2874e6..662d64a62 100644 --- a/config/examples/RigidBot/Configuration.h +++ b/config/examples/RigidBot/Configuration.h @@ -927,7 +927,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index 0baf66d89..6fdcf1663 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/SCARA/MP_SCARA/Configuration.h b/config/examples/SCARA/MP_SCARA/Configuration.h index 1b9cec18f..501f423c5 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration.h +++ b/config/examples/SCARA/MP_SCARA/Configuration.h @@ -950,7 +950,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/SCARA/Morgan/Configuration.h b/config/examples/SCARA/Morgan/Configuration.h index 39d319a14..e3fef4535 100644 --- a/config/examples/SCARA/Morgan/Configuration.h +++ b/config/examples/SCARA/Morgan/Configuration.h @@ -951,7 +951,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index de7240703..fc379612d 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -1435,7 +1435,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h index b0810f744..36dec613d 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h @@ -929,7 +929,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index 9a35e7412..25717aa3a 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/STM32/STM32F103RE/Configuration.h b/config/examples/STM32/STM32F103RE/Configuration.h index 66b1429a3..5faebd937 100644 --- a/config/examples/STM32/STM32F103RE/Configuration.h +++ b/config/examples/STM32/STM32F103RE/Configuration.h @@ -931,7 +931,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/STM32/STM32F4/Configuration.h b/config/examples/STM32/STM32F4/Configuration.h index 71ab97a32..06f94ba67 100644 --- a/config/examples/STM32/STM32F4/Configuration.h +++ b/config/examples/STM32/STM32F4/Configuration.h @@ -929,7 +929,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/STM32/stm32f103ret6/Configuration.h b/config/examples/STM32/stm32f103ret6/Configuration.h index fcdab6c65..e9ddec40c 100644 --- a/config/examples/STM32/stm32f103ret6/Configuration.h +++ b/config/examples/STM32/stm32f103ret6/Configuration.h @@ -931,7 +931,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h index 353faeb5a..6cbe8444d 100644 --- a/config/examples/Sanguinololu/Configuration.h +++ b/config/examples/Sanguinololu/Configuration.h @@ -960,7 +960,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h index e041903f1..340f05649 100644 --- a/config/examples/Sanguinololu/Configuration_adv.h +++ b/config/examples/Sanguinololu/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Tevo/Michelangelo/Configuration.h b/config/examples/Tevo/Michelangelo/Configuration.h index fd82cb9d2..d46f12241 100644 --- a/config/examples/Tevo/Michelangelo/Configuration.h +++ b/config/examples/Tevo/Michelangelo/Configuration.h @@ -934,7 +934,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index 31988394f..f2090dcc4 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Tevo/Nereus/Configuration.h b/config/examples/Tevo/Nereus/Configuration.h index 34c645f51..60453c4fc 100755 --- a/config/examples/Tevo/Nereus/Configuration.h +++ b/config/examples/Tevo/Nereus/Configuration.h @@ -913,7 +913,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index 8f77bdc0f..74f194fc9 100755 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Tevo/Tarantula Pro/Configuration.h b/config/examples/Tevo/Tarantula Pro/Configuration.h index e136ca3af..445bd3165 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration.h @@ -934,7 +934,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 0, 18, -1.5 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h index e0d4b3a49..8b4842c92 100755 --- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h index 18440fdf8..fc0e16ea3 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h @@ -934,7 +934,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { -45, -12, -2.77 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index de736c3bb..e15981143 100755 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h index 0f7fd9713..b3b6674c9 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h @@ -934,7 +934,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { -45, -12, -2.77 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h index de736c3bb..e15981143 100755 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/TheBorg/Configuration.h b/config/examples/TheBorg/Configuration.h index 0a192c0e8..1343f7c98 100644 --- a/config/examples/TheBorg/Configuration.h +++ b/config/examples/TheBorg/Configuration.h @@ -929,7 +929,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 32, 5, -1.3 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h index ae57c8a4d..fdd2e96be 100644 --- a/config/examples/TheBorg/Configuration_adv.h +++ b/config/examples/TheBorg/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h index 72ace6360..5b22f8246 100644 --- a/config/examples/TinyBoy2/Configuration.h +++ b/config/examples/TinyBoy2/Configuration.h @@ -980,7 +980,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 34, 15, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index 22f71e7fd..e54a0ef32 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h index 9ce7ae443..8f441eabd 100644 --- a/config/examples/Tronxy/X1/Configuration.h +++ b/config/examples/Tronxy/X1/Configuration.h @@ -929,7 +929,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h index c3302b0bc..7dcafa509 100644 --- a/config/examples/Tronxy/X3A/Configuration.h +++ b/config/examples/Tronxy/X3A/Configuration.h @@ -929,7 +929,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { -32, -10, -0.5 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 50 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index 3dcf8ded3..ecc1800a1 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Tronxy/X5S-2E/Configuration.h b/config/examples/Tronxy/X5S-2E/Configuration.h index e7cf88338..ec15e440b 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Configuration.h @@ -950,7 +950,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h index 12acd7e92..ac2aa9ef3 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h index 5a5496fc0..bee413732 100644 --- a/config/examples/Tronxy/X5S/Configuration.h +++ b/config/examples/Tronxy/X5S/Configuration.h @@ -929,7 +929,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { -45, -55, -0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h index 80f61f2a3..29c90326b 100644 --- a/config/examples/Tronxy/XY100/Configuration.h +++ b/config/examples/Tronxy/XY100/Configuration.h @@ -940,7 +940,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h index 488d8713b..8183ac024 100644 --- a/config/examples/UltiMachine/Archim1/Configuration.h +++ b/config/examples/UltiMachine/Archim1/Configuration.h @@ -929,7 +929,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index 3a96ad171..33358ffa2 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h index 4e8e46d40..2500e534a 100644 --- a/config/examples/UltiMachine/Archim2/Configuration.h +++ b/config/examples/UltiMachine/Archim2/Configuration.h @@ -929,7 +929,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index bffab6699..2e2b7f6cf 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h index a2c424a09..1b505bb90 100644 --- a/config/examples/VORONDesign/Configuration.h +++ b/config/examples/VORONDesign/Configuration.h @@ -938,7 +938,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index b83cf5cab..87ea70225 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h index 1fc123a09..c71828697 100644 --- a/config/examples/Velleman/K8200/Configuration.h +++ b/config/examples/Velleman/K8200/Configuration.h @@ -958,7 +958,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index b1e7f197f..8a6fdb4dc 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -1451,7 +1451,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h index 90c73e6a5..94f5dde2d 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -929,7 +929,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index f800b5c44..38c820ca5 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Velleman/K8400/Single-head/Configuration.h b/config/examples/Velleman/K8400/Single-head/Configuration.h index d93773dcd..5615f51f2 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration.h @@ -929,7 +929,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index f800b5c44..38c820ca5 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h index 6c33f321e..c063560af 100644 --- a/config/examples/WASP/PowerWASP/Configuration.h +++ b/config/examples/WASP/PowerWASP/Configuration.h @@ -948,7 +948,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index 9495a5416..3e4a91ae6 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h index ce6f61d54..ec7bef9f5 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -939,7 +939,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index 0f0f5072f..0de6c70c3 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -1440,7 +1440,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h index b5c20b83d..4bbecf904 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h @@ -940,7 +940,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index 6077e0525..937a17eb4 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h index 6dcd80acb..776a004da 100755 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h @@ -929,7 +929,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index 6ccfd6e73..5b157d4fe 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/adafruit/ST7565/Configuration.h b/config/examples/adafruit/ST7565/Configuration.h index a95468960..81e22a0a5 100644 --- a/config/examples/adafruit/ST7565/Configuration.h +++ b/config/examples/adafruit/ST7565/Configuration.h @@ -929,7 +929,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h index 7fc6822a2..8d86f8b27 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration.h @@ -1092,7 +1092,8 @@ #define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } #endif -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 15 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index b702538b7..2bc966647 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -1440,7 +1440,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration.h b/config/examples/delta/Dreammaker/Overlord/Configuration.h index f6d828789..56bed9f6e 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration.h @@ -1036,7 +1036,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.65 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 5 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index 4ee8bdb9a..55d9638b9 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -1439,7 +1439,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h index 94979f58f..07cb57649 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h @@ -1048,7 +1048,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.65 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 5 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index 774d749bb..9bbcdcbe3 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -1440,7 +1440,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration.h b/config/examples/delta/FLSUN/QQ-S/Configuration.h index 09ba19da5..dfb20aef5 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration.h @@ -1038,7 +1038,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 20 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index de913b7be..72efde650 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -1440,7 +1440,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index b842f8ee5..d7ce839a9 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -1041,7 +1041,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.10 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 20 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index d76bc56d5..3d7bf7492 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -1440,7 +1440,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h index a4c71e611..d222ab463 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/config/examples/delta/FLSUN/kossel/Configuration.h @@ -1040,7 +1040,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.10 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 20 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index d76bc56d5..3d7bf7492 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -1440,7 +1440,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h index 0db33ff99..4dfbb1aab 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -1040,7 +1040,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.25 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 007d8003c..2feca0790 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -1440,7 +1440,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h index d42e98545..dbdfdc7eb 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h @@ -1028,7 +1028,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index 714e8f32e..43bc2294a 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -1440,7 +1440,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h index 65e4fcb08..6780f2928 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -1043,7 +1043,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h index 231f6e5e7..b3b0d80af 100644 --- a/config/examples/delta/MKS/SBASE/Configuration.h +++ b/config/examples/delta/MKS/SBASE/Configuration.h @@ -1027,7 +1027,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index 241e21606..214683d05 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -1440,7 +1440,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h index b30054c07..ecf4cb147 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration.h +++ b/config/examples/delta/Tevo Little Monster/Configuration.h @@ -1032,7 +1032,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 0, 20, -1.10 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 20 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index f44be1408..a828d4aa7 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -1440,7 +1440,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h index 3312cbcd7..df65319cf 100644 --- a/config/examples/delta/generic/Configuration.h +++ b/config/examples/delta/generic/Configuration.h @@ -1028,7 +1028,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index 007d8003c..2feca0790 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -1440,7 +1440,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/delta/kossel_clear/Configuration.h b/config/examples/delta/kossel_clear/Configuration.h index 7ae934bf1..f6fb09d20 100644 --- a/config/examples/delta/kossel_clear/Configuration.h +++ b/config/examples/delta/kossel_clear/Configuration.h @@ -1034,7 +1034,8 @@ //BL Touch with John Ecker Custom Mount #define NOZZLE_TO_PROBE_OFFSET { 0, -29, -3.4 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 1 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index f0f3d66a0..9fab2a7a2 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -1440,7 +1440,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h index d09738f56..7b6338aa8 100644 --- a/config/examples/delta/kossel_mini/Configuration.h +++ b/config/examples/delta/kossel_mini/Configuration.h @@ -1030,7 +1030,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h index 007d8003c..2feca0790 100644 --- a/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/kossel_mini/Configuration_adv.h @@ -1440,7 +1440,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h index 20d57e571..eaf46fc38 100644 --- a/config/examples/delta/kossel_pro/Configuration.h +++ b/config/examples/delta/kossel_pro/Configuration.h @@ -1029,7 +1029,8 @@ * not giving someone a head crash. Use something like G29 Z-0.2 to adjust as needed. */ -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h index 0ad3f64be..9119419e4 100644 --- a/config/examples/delta/kossel_xl/Configuration.h +++ b/config/examples/delta/kossel_xl/Configuration.h @@ -1031,7 +1031,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 0.0, 0.0, 0.3 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index 85a941603..f6031b728 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -1440,7 +1440,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h index 05be303ec..582380638 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/config/examples/gCreate/gMax1.5+/Configuration.h @@ -942,7 +942,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { -17, -10, -0.25 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 45 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index 4c8519fcc..d79c6586d 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h index 3d4fbaa1f..9bb50e352 100644 --- a/config/examples/makibox/Configuration.h +++ b/config/examples/makibox/Configuration.h @@ -932,7 +932,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index 7dc28522a..170eda166 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h index d0f8637c9..60fea65b8 100644 --- a/config/examples/tvrrug/Round2/Configuration.h +++ b/config/examples/tvrrug/Round2/Configuration.h @@ -924,7 +924,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index b9bb0751e..0a8214c25 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -1438,7 +1438,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over diff --git a/config/examples/wt150/Configuration.h b/config/examples/wt150/Configuration.h index ac8122168..8b3c46f66 100644 --- a/config/examples/wt150/Configuration.h +++ b/config/examples/wt150/Configuration.h @@ -934,7 +934,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes diff --git a/config/examples/wt150/Configuration_adv.h b/config/examples/wt150/Configuration_adv.h index 965972ca3..dab116d11 100644 --- a/config/examples/wt150/Configuration_adv.h +++ b/config/examples/wt150/Configuration_adv.h @@ -1439,7 +1439,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over