STM32duino - Use SDIO for onboard SD (#16756)
This commit is contained in:
Bob Kuhn
parent
38a9706e16
commit
0268c1d02c
GPG key ID:
4AEE18F83AFDEB23
21 changed files with 485 additions and 460 deletions
274
Marlin/src/HAL/HAL_STM32/Sd2Card_sdio_stm32duino.cpp
Normal file
274
Marlin/src/HAL/HAL_STM32/Sd2Card_sdio_stm32duino.cpp
Normal file
|
|
@ -0,0 +1,274 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
#include "../../inc/MarlinConfig.h"
|
||||
|
||||
#if ENABLED(SDIO_SUPPORT) && !defined(STM32GENERIC)
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
|
||||
//#include "SdMscDriver.h"
|
||||
|
||||
//#include "usbd_msc_bot.h"
|
||||
//#include "usbd_msc_scsi.h"
|
||||
//#include "usbd_msc_composite.h"
|
||||
//#include "usbd_msc_cdc_composite.h"
|
||||
|
||||
//#include "usbd_msc_data.h"
|
||||
|
||||
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||||
#include <stm32f1xx_hal_rcc_ex.h>
|
||||
#include <stm32f1xx_hal_sd.h>
|
||||
#elif defined(STM32F4xx)
|
||||
#include <stm32f4xx_hal_rcc.h>
|
||||
#include <stm32f4xx_hal_dma.h>
|
||||
#include <stm32f4xx_hal_gpio.h>
|
||||
#include <stm32f4xx_hal_sd.h>
|
||||
#elif defined(STM32F7xx)
|
||||
#include <stm32f7xx_hal_rcc.h>
|
||||
#include <stm32f7xx_hal_dma.h>
|
||||
#include <stm32f7xx_hal_gpio.h>
|
||||
#include <stm32f7xx_hal_sd.h>
|
||||
#else
|
||||
#error "ERROR - Only STM32F103xE, STM32F103xG, STM32F4xx or STM32F7xx CPUs supported"
|
||||
#endif
|
||||
|
||||
SD_HandleTypeDef hsd; // create SDIO structure
|
||||
|
||||
#define TRANSFER_CLOCK_DIV ((uint8_t)SDIO_INIT_CLK_DIV/40)
|
||||
|
||||
#ifndef USBD_OK
|
||||
#define USBD_OK 0
|
||||
#endif
|
||||
|
||||
void go_to_transfer_speed() {
|
||||
|
||||
SD_InitTypeDef Init;
|
||||
|
||||
/* Default SDIO peripheral configuration for SD card initialization */
|
||||
Init.ClockEdge = hsd.Init.ClockEdge;
|
||||
Init.ClockBypass = hsd.Init.ClockBypass;
|
||||
Init.ClockPowerSave = hsd.Init.ClockPowerSave;
|
||||
Init.BusWide = hsd.Init.BusWide;
|
||||
Init.HardwareFlowControl = hsd.Init.HardwareFlowControl;
|
||||
Init.ClockDiv = TRANSFER_CLOCK_DIV;
|
||||
|
||||
/* Initialize SDIO peripheral interface with default configuration */
|
||||
SDIO_Init(hsd.Instance, Init);
|
||||
}
|
||||
|
||||
void SD_LowLevel_Init(void) {
|
||||
|
||||
uint32_t tempreg;
|
||||
|
||||
GPIO_InitTypeDef GPIO_InitStruct;
|
||||
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE(); //enable GPIO clocks
|
||||
__HAL_RCC_GPIOD_CLK_ENABLE(); //enable GPIO clocks
|
||||
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_8 | GPIO_PIN_12; // D0 & SCK
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = 1; //GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF12_SDIO;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
#if defined(SDIO_D1_PIN) && defined(SDIO_D2_PIN) && defined(SDIO_D3_PIN) // define D1-D3 only if have a four bit wide SDIO bus
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_9 | GPIO_PIN_10 | GPIO_PIN_11; // D1-D3
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = 1; //GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF12_SDIO;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
#endif
|
||||
|
||||
// Configure PD.02 CMD line
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_2;
|
||||
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
|
||||
|
||||
RCC->APB2RSTR &= ~RCC_APB2RSTR_SDIORST_Msk; // take SDIO out of reset
|
||||
RCC->APB2ENR |= RCC_APB2RSTR_SDIORST_Msk; // enable SDIO clock
|
||||
|
||||
// Enable the DMA2 Clock
|
||||
|
||||
//Initialize the SDIO (with initial <400Khz Clock)
|
||||
tempreg = 0; //Reset value
|
||||
tempreg |= SDIO_CLKCR_CLKEN; //Clock is enabled
|
||||
tempreg |= (uint32_t)0x76; //Clock Divider. Clock = 48000/(118+2) = 400Khz
|
||||
//Keep the rest at 0 => HW_Flow Disabled, Rising Clock Edge, Disable CLK ByPass, Bus Width = 0, Power save Disable
|
||||
SDIO->CLKCR = tempreg;
|
||||
|
||||
//Power up the SDIO
|
||||
SDIO->POWER = 0x03;
|
||||
}
|
||||
|
||||
|
||||
void HAL_SD_MspInit(SD_HandleTypeDef *hsd) { // application specific init
|
||||
UNUSED(hsd); /* Prevent unused argument(s) compilation warning */
|
||||
__HAL_RCC_SDIO_CLK_ENABLE(); // turn on SDIO clock
|
||||
}
|
||||
|
||||
constexpr uint8_t SD_RETRY_COUNT = (1
|
||||
#if ENABLED(SD_CHECK_AND_RETRY)
|
||||
+ 2
|
||||
#endif
|
||||
);
|
||||
|
||||
bool SDIO_Init() {
|
||||
//init SDIO and get SD card info
|
||||
|
||||
uint8_t retryCnt = SD_RETRY_COUNT;
|
||||
|
||||
bool status;
|
||||
hsd.Instance = SDIO;
|
||||
hsd.State = (HAL_SD_StateTypeDef) 0; // HAL_SD_STATE_RESET
|
||||
SD_LowLevel_Init();
|
||||
|
||||
uint8_t retry_Cnt = retryCnt;
|
||||
for (;;) {
|
||||
status = (bool) HAL_SD_Init(&hsd);
|
||||
if (!status) break;
|
||||
if (!--retry_Cnt) return false; // return failing status if retries are exhausted
|
||||
}
|
||||
|
||||
go_to_transfer_speed();
|
||||
|
||||
#if defined(SDIO_D1_PIN) && defined(SDIO_D2_PIN) && defined(SDIO_D3_PIN) // go to 4 bit wide mode if pins are defined
|
||||
retry_Cnt = retryCnt;
|
||||
for (;;) {
|
||||
if (!HAL_SD_ConfigWideBusOperation(&hsd, SDIO_BUS_WIDE_4B)) break; // some cards are only 1 bit wide so a pass here is not required
|
||||
if (!--retry_Cnt) break;
|
||||
}
|
||||
if (!retry_Cnt) { // wide bus failed, go back to one bit wide mode
|
||||
hsd.State = (HAL_SD_StateTypeDef) 0; // HAL_SD_STATE_RESET
|
||||
SD_LowLevel_Init();
|
||||
retry_Cnt = retryCnt;
|
||||
for (;;) {
|
||||
status = (bool) HAL_SD_Init(&hsd);
|
||||
if (!status) break;
|
||||
if (!--retry_Cnt) return false; // return failing status if retries are exhausted
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
void init_SDIO_pins(void) {
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
|
||||
/**SDIO GPIO Configuration
|
||||
PC8 ------> SDIO_D0
|
||||
PC12 ------> SDIO_CK
|
||||
PD2 ------> SDIO_CMD
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_8;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF12_SDIO;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_12;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF12_SDIO;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_2;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF12_SDIO;
|
||||
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
|
||||
}
|
||||
|
||||
//bool SDIO_init() { return (bool) (SD_SDIO_Init() ? 1 : 0);}
|
||||
//bool SDIO_Init_C() { return (bool) (SD_SDIO_Init() ? 1 : 0);}
|
||||
|
||||
bool SDIO_ReadBlock(uint32_t block, uint8_t *dst) {
|
||||
bool status;
|
||||
|
||||
hsd.Instance = SDIO;
|
||||
|
||||
uint8_t retryCnt = SD_RETRY_COUNT;
|
||||
|
||||
for (;;) {
|
||||
bool status = (bool) HAL_SD_ReadBlocks(&hsd, (uint8_t*)dst, block, 1, 1000); // read one 512 byte block with 500mS timeout
|
||||
status |= (bool) HAL_SD_GetCardState(&hsd); // make sure all is OK
|
||||
if (!status) return false; // return passing status
|
||||
if (!--retryCnt) return true; // return failing status if retries are exhausted
|
||||
}
|
||||
|
||||
/*
|
||||
return (bool) ((status_read | status_card) ? 1 : 0);
|
||||
|
||||
if (SDIO_GetCardState() != SDIO_CARD_TRANSFER) return false;
|
||||
if (blockAddress >= SdCard.LogBlockNbr) return false;
|
||||
if ((0x03 & (uint32_t)data)) return false; // misaligned data
|
||||
|
||||
if (SdCard.CardType != CARD_SDHC_SDXC) { blockAddress *= 512U; }
|
||||
|
||||
if (!SDIO_CmdReadSingleBlock(blockAddress)) {
|
||||
SDIO_CLEAR_FLAG(SDIO_ICR_CMD_FLAGS);
|
||||
dma_disable(SDIO_DMA_DEV, SDIO_DMA_CHANNEL);
|
||||
return false;
|
||||
}
|
||||
|
||||
while (!SDIO_GET_FLAG(SDIO_STA_DATAEND | SDIO_STA_TRX_ERROR_FLAGS)) {}
|
||||
|
||||
dma_disable(SDIO_DMA_DEV, SDIO_DMA_CHANNEL);
|
||||
|
||||
if (SDIO->STA & SDIO_STA_RXDAVL) {
|
||||
while (SDIO->STA & SDIO_STA_RXDAVL) (void)SDIO->FIFO;
|
||||
SDIO_CLEAR_FLAG(SDIO_ICR_CMD_FLAGS | SDIO_ICR_DATA_FLAGS);
|
||||
return false;
|
||||
}
|
||||
|
||||
if (SDIO_GET_FLAG(SDIO_STA_TRX_ERROR_FLAGS)) {
|
||||
SDIO_CLEAR_FLAG(SDIO_ICR_CMD_FLAGS | SDIO_ICR_DATA_FLAGS);
|
||||
return false;
|
||||
}
|
||||
SDIO_CLEAR_FLAG(SDIO_ICR_CMD_FLAGS | SDIO_ICR_DATA_FLAGS);
|
||||
*/
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
bool SDIO_WriteBlock(uint32_t block, const uint8_t *src) {
|
||||
bool status;
|
||||
|
||||
hsd.Instance = SDIO;
|
||||
|
||||
uint8_t retryCnt = SD_RETRY_COUNT;
|
||||
|
||||
for (;;) {
|
||||
status = (bool) HAL_SD_WriteBlocks(&hsd, (uint8_t*)src, block, 1, 500); // write one 512 byte block with 500mS timeout
|
||||
status |= (bool) HAL_SD_GetCardState(&hsd); // make sure all is OK
|
||||
if (!status) return (bool) status; // return passing status
|
||||
if (!--retryCnt) return (bool) status; // return failing status if retries are exhausted
|
||||
}
|
||||
}
|
||||
|
||||
#endif // SDIO_SUPPORT
|
||||
|
|
@ -70,7 +70,7 @@ typedef uint16_t hal_timer_t;
|
|||
//#define TEMP_TIMER_NUM 4 // 2->4, Timer 2 for Stepper Current PWM
|
||||
#define PULSE_TIMER_NUM STEP_TIMER_NUM
|
||||
|
||||
#if MB(BTT_SKR_MINI_E3_V1_0, BIGTREE_SKR_E3_DIP, BTT_SKR_MINI_E3_V1_2, MKS_ROBIN_LITE)
|
||||
#if MB(BTT_SKR_MINI_E3_V1_0, BTT_SKR_E3_DIP, BTT_SKR_MINI_E3_V1_2, MKS_ROBIN_LITE)
|
||||
// SKR Mini E3 boards use PA8 as FAN_PIN, so TIMER 1 is used for Fan PWM.
|
||||
#ifdef STM32_HIGH_DENSITY
|
||||
#define SERVO0_TIMER_NUM 8 // tone.cpp uses Timer 4
|
||||
|
|
|
|||
|
|
@ -208,9 +208,9 @@
|
|||
#define BOARD_BIQU_B300_V1_0 2009 // BIQU B300_V1.0 (Power outputs: Hotend0, Fan, Bed, SPI Driver)
|
||||
#define BOARD_MKS_SGEN_L 2010 // MKS-SGen-L (Power outputs: Hotend0, Hotend1, Bed, Fan)
|
||||
#define BOARD_GMARSH_X6_REV1 2011 // GMARSH X6 board, revision 1 prototype
|
||||
#define BOARD_BIGTREE_SKR_V1_1 2012 // BigTreeTech SKR v1.1 (Power outputs: Hotend0, Hotend1, Fan, Bed)
|
||||
#define BOARD_BIGTREE_SKR_V1_3 2013 // BigTreeTech SKR v1.3 (Power outputs: Hotend0, Hotend1, Fan, Bed)
|
||||
#define BOARD_BIGTREE_SKR_V1_4 2014 // BigTreeTech SKR v1.4 (Power outputs: Hotend0, Hotend1, Fan, Bed)
|
||||
#define BOARD_BTT_SKR_V1_1 2012 // BigTreeTech SKR v1.1 (Power outputs: Hotend0, Hotend1, Fan, Bed)
|
||||
#define BOARD_BTT_SKR_V1_3 2013 // BigTreeTech SKR v1.3 (Power outputs: Hotend0, Hotend1, Fan, Bed)
|
||||
#define BOARD_BTT_SKR_V1_4 2014 // BigTreeTech SKR v1.4 (Power outputs: Hotend0, Hotend1, Fan, Bed)
|
||||
|
||||
//
|
||||
// LPC1769 ARM Cortex M3
|
||||
|
|
@ -224,7 +224,7 @@
|
|||
#define BOARD_COHESION3D_MINI 2505 // Cohesion3D Mini
|
||||
#define BOARD_SMOOTHIEBOARD 2506 // Smoothieboard
|
||||
#define BOARD_TH3D_EZBOARD 2507 // TH3D EZBoard v1.0
|
||||
#define BOARD_BIGTREE_SKR_V1_4_TURBO 2508 // BigTreeTech SKR v1.4 TURBO (Power outputs: Hotend0, Hotend1, Fan, Bed)
|
||||
#define BOARD_BTT_SKR_V1_4_TURBO 2508 // BigTreeTech SKR v1.4 TURBO (Power outputs: Hotend0, Hotend1, Fan, Bed)
|
||||
|
||||
//
|
||||
// SAM3X8E ARM Cortex M3
|
||||
|
|
@ -281,10 +281,10 @@
|
|||
#define BOARD_MKS_ROBIN_LITE 4009 // MKS Robin Lite/Lite2 (STM32F103RCT6)
|
||||
#define BOARD_MKS_ROBIN_LITE3 4010 // MKS Robin Lite3 (STM32F103RCT6)
|
||||
#define BOARD_MKS_ROBIN_PRO 4011 // MKS Robin Pro (STM32F103ZET6)
|
||||
#define BOARD_BIGTREE_SKR_MINI_V1_1 4012 // BigTreeTech SKR Mini v1.1 (STM32F103RC)
|
||||
#define BOARD_BTT_SKR_MINI_V1_1 4012 // BigTreeTech SKR Mini v1.1 (STM32F103RC)
|
||||
#define BOARD_BTT_SKR_MINI_E3_V1_0 4013 // BigTreeTech SKR Mini E3 (STM32F103RC)
|
||||
#define BOARD_BTT_SKR_MINI_E3_V1_2 4014 // BigTreeTech SKR Mini E3 V1.2 (STM32F103RC)
|
||||
#define BOARD_BIGTREE_SKR_E3_DIP 4015 // BigTreeTech SKR E3 DIP V1.0 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_BTT_SKR_E3_DIP 4015 // BigTreeTech SKR E3 DIP V1.0 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_JGAURORA_A5S_A1 4016 // JGAurora A5S A1 (STM32F103ZET6)
|
||||
#define BOARD_FYSETC_AIO_II 4017 // FYSETC AIO_II
|
||||
#define BOARD_FYSETC_CHEETAH 4018 // FYSETC Cheetah
|
||||
|
|
@ -313,14 +313,15 @@
|
|||
#define BOARD_BLACK_STM32F407VE 4204 // BLACK_STM32F407VE
|
||||
#define BOARD_BLACK_STM32F407ZE 4205 // BLACK_STM32F407ZE
|
||||
#define BOARD_STEVAL_3DP001V1 4206 // STEVAL-3DP001V1 3D PRINTER BOARD
|
||||
#define BOARD_BIGTREE_SKR_PRO_V1_1 4207 // BigTreeTech SKR Pro v1.1 (STM32F407ZG)
|
||||
#define BOARD_BIGTREE_BTT002_V1_0 4208 // BigTreeTech BTT002 v1.0 (STM32F407VE)
|
||||
#define BOARD_LERDGE_K 4209 // Lerdge K (STM32F407ZG)
|
||||
#define BOARD_LERDGE_X 4210 // Lerdge X (STM32F407VE)
|
||||
#define BOARD_VAKE403D 4211 // VAkE 403D (STM32F446VET6)
|
||||
#define BOARD_FYSETC_S6 4212 // FYSETC S6 board
|
||||
#define BOARD_FLYF407ZG 4213 // FLYF407ZG board (STM32F407ZG)
|
||||
#define BOARD_MKS_ROBIN2 4214 // MKS_ROBIN2 (STM32F407ZE)
|
||||
#define BOARD_BTT_SKR_PRO_V1_1 4207 // BigTreeTech SKR Pro v1.1 (STM32F407ZG)
|
||||
#define BOARD_BTT_BTT002_V1_0 4208 // BigTreeTech BTT002 v1.0 (STM32F407VE)
|
||||
#define BOARD_BTT_GTR_V1_0 4209 // BigTreeTech GTR v1.0 (STM32F407IGT)
|
||||
#define BOARD_LERDGE_K 4210 // Lerdge K (STM32F407ZG)
|
||||
#define BOARD_LERDGE_X 4211 // Lerdge X (STM32F407VE)
|
||||
#define BOARD_VAKE403D 4212 // VAkE 403D (STM32F446VET6)
|
||||
#define BOARD_FYSETC_S6 4213 // FYSETC S6 board
|
||||
#define BOARD_FLYF407ZG 4214 // FLYF407ZG board (STM32F407ZG)
|
||||
#define BOARD_MKS_ROBIN2 4215 // MKS_ROBIN2 (STM32F407ZE)
|
||||
|
||||
//
|
||||
// ARM Cortex M7
|
||||
|
|
|
|||
|
|
@ -196,12 +196,14 @@
|
|||
#define EITHER(V1,V2) ANY(V1,V2)
|
||||
|
||||
// Macros to support pins/buttons exist testing
|
||||
#define _PINEX_1(PN) (defined(PN##_PIN) && PN##_PIN >= 0)
|
||||
#define PIN_EXISTS(V...) DO(PINEX,&&,V)
|
||||
#define PIN_EXISTS(PN) (defined(PN##_PIN) && PN##_PIN >= 0)
|
||||
#define _PINEX_1 PIN_EXISTS
|
||||
#define PINS_EXIST(V...) DO(PINEX,&&,V)
|
||||
#define ANY_PIN(V...) DO(PINEX,||,V)
|
||||
|
||||
#define _BTNEX_1(BN) (defined(BTN_##BN) && BTN_##BN >= 0)
|
||||
#define BUTTON_EXISTS(V...) DO(BTNEX,&&,V)
|
||||
#define BUTTON_EXISTS(BN) (defined(BTN_##BN) && BTN_##BN >= 0)
|
||||
#define _BTNEX_1 BUTTON_EXISTS
|
||||
#define BUTTONS_EXIST(V...) DO(BTNEX,&&,V)
|
||||
#define ANY_BUTTON(V...) DO(BTNEX,||,V)
|
||||
|
||||
#define WITHIN(N,L,H) ((N) >= (L) && (N) <= (H))
|
||||
|
|
|
|||
|
|
@ -927,7 +927,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
|||
#elif TOOLCHANGE_ZRAISE < 0
|
||||
#error "TOOLCHANGE_ZRAISE must be 0 or higher."
|
||||
#elif ENABLED(PARKING_EXTRUDER)
|
||||
#if !PIN_EXISTS(SOL0, SOL1)
|
||||
#if !PINS_EXIST(SOL0, SOL1)
|
||||
#error "PARKING_EXTRUDER requires SOL0_PIN and SOL1_PIN."
|
||||
#elif !defined(PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE) || !WITHIN(PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE, LOW, HIGH)
|
||||
#error "PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE must be defined as HIGH or LOW."
|
||||
|
|
@ -1515,9 +1515,9 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
|||
#error "HEATER_0_PIN not defined for this board."
|
||||
#elif !ANY_PIN(TEMP_0, MAX6675_SS)
|
||||
#error "TEMP_0_PIN not defined for this board."
|
||||
#elif ((defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)) && !PIN_EXISTS(E0_STEP, E0_DIR))
|
||||
#elif ((defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)) && !PINS_EXIST(E0_STEP, E0_DIR))
|
||||
#error "E0_STEP_PIN or E0_DIR_PIN not defined for this board."
|
||||
#elif ( !(defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)) && (!PIN_EXISTS(E0_STEP, E0_DIR) || !HAS_E0_ENABLE))
|
||||
#elif ( !(defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)) && (!PINS_EXIST(E0_STEP, E0_DIR) || !HAS_E0_ENABLE))
|
||||
#error "E0_STEP_PIN, E0_DIR_PIN, or E0_ENABLE_PIN not defined for this board."
|
||||
#elif EXTRUDERS && TEMP_SENSOR_0 == 0
|
||||
#error "TEMP_SENSOR_0 is required with any extruders."
|
||||
|
|
@ -1709,35 +1709,35 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
|||
*/
|
||||
#if DISABLED(MK2_MULTIPLEXER) // MK2_MULTIPLEXER uses E0 stepper only
|
||||
#if E_STEPPERS
|
||||
#if !(PIN_EXISTS(E0_STEP, E0_DIR) && HAS_E0_ENABLE)
|
||||
#if !(PINS_EXIST(E0_STEP, E0_DIR) && HAS_E0_ENABLE)
|
||||
#error "E0_STEP_PIN, E0_DIR_PIN, or E0_ENABLE_PIN not defined for this board."
|
||||
#endif
|
||||
#if E_STEPPERS > 1
|
||||
#if !(PIN_EXISTS(E1_STEP, E1_DIR) && HAS_E1_ENABLE)
|
||||
#if !(PINS_EXIST(E1_STEP, E1_DIR) && HAS_E1_ENABLE)
|
||||
#error "E1_STEP_PIN, E1_DIR_PIN, or E1_ENABLE_PIN not defined for this board."
|
||||
#endif
|
||||
#if E_STEPPERS > 2
|
||||
#if !(PIN_EXISTS(E2_STEP, E2_DIR) && HAS_E2_ENABLE)
|
||||
#if !(PINS_EXIST(E2_STEP, E2_DIR) && HAS_E2_ENABLE)
|
||||
#error "E2_STEP_PIN, E2_DIR_PIN, or E2_ENABLE_PIN not defined for this board."
|
||||
#endif
|
||||
#if E_STEPPERS > 3
|
||||
#if !(PIN_EXISTS(E3_STEP, E3_DIR) && HAS_E3_ENABLE)
|
||||
#if !(PINS_EXIST(E3_STEP, E3_DIR) && HAS_E3_ENABLE)
|
||||
#error "E3_STEP_PIN, E3_DIR_PIN, or E3_ENABLE_PIN not defined for this board."
|
||||
#endif
|
||||
#if E_STEPPERS > 4
|
||||
#if !(PIN_EXISTS(E4_STEP, E4_DIR) && HAS_E4_ENABLE)
|
||||
#if !(PINS_EXIST(E4_STEP, E4_DIR) && HAS_E4_ENABLE)
|
||||
#error "E4_STEP_PIN, E4_DIR_PIN, or E4_ENABLE_PIN not defined for this board."
|
||||
#endif
|
||||
#if E_STEPPERS > 5
|
||||
#if !(PIN_EXISTS(E5_STEP, E5_DIR) && HAS_E5_ENABLE)
|
||||
#if !(PINS_EXIST(E5_STEP, E5_DIR) && HAS_E5_ENABLE)
|
||||
#error "E5_STEP_PIN, E5_DIR_PIN, or E5_ENABLE_PIN not defined for this board."
|
||||
#endif
|
||||
#if E_STEPPERS > 6
|
||||
#if !(PIN_EXISTS(E6_STEP, E6_DIR) && HAS_E6_ENABLE)
|
||||
#if !(PINS_EXIST(E6_STEP, E6_DIR) && HAS_E6_ENABLE)
|
||||
#error "E6_STEP_PIN, E6_DIR_PIN, or E6_ENABLE_PIN not defined for this board."
|
||||
#endif
|
||||
#if E_STEPPERS > 7
|
||||
#if !(PIN_EXISTS(E7_STEP, E7_DIR) && HAS_E7_ENABLE)
|
||||
#if !(PINS_EXIST(E7_STEP, E7_DIR) && HAS_E7_ENABLE)
|
||||
#error "E7_STEP_PIN, E7_DIR_PIN, or E7_ENABLE_PIN not defined for this board."
|
||||
#endif
|
||||
#endif // E_STEPPERS > 7
|
||||
|
|
@ -1926,7 +1926,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
|||
/**
|
||||
* RGB_LED Requirements
|
||||
*/
|
||||
#define _RGB_TEST (PIN_EXISTS(RGB_LED_R, RGB_LED_G, RGB_LED_B))
|
||||
#define _RGB_TEST (PINS_EXIST(RGB_LED_R, RGB_LED_G, RGB_LED_B))
|
||||
#if ENABLED(PRINTER_EVENT_LEDS) && !HAS_COLOR_LEDS
|
||||
#error "PRINTER_EVENT_LEDS requires BLINKM, PCA9533, PCA9632, RGB_LED, RGBW_LED or NEOPIXEL_LED."
|
||||
#elif ENABLED(RGB_LED)
|
||||
|
|
@ -2080,7 +2080,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
|||
/**
|
||||
* Check existing RX/TX pins against enable TMC UART drivers.
|
||||
*/
|
||||
#define INVALID_TMC_UART(ST) (AXIS_HAS_UART(ST) && !(defined(ST##_HARDWARE_SERIAL) || (PIN_EXISTS(ST##_SERIAL_RX, ST##_SERIAL_TX))))
|
||||
#define INVALID_TMC_UART(ST) (AXIS_HAS_UART(ST) && !(defined(ST##_HARDWARE_SERIAL) || (PINS_EXIST(ST##_SERIAL_RX, ST##_SERIAL_TX))))
|
||||
#if INVALID_TMC_UART(X)
|
||||
#error "TMC2208 or TMC2209 on X requires X_HARDWARE_SERIAL or X_SERIAL_(RX|TX)_PIN."
|
||||
#elif INVALID_TMC_UART(X2)
|
||||
|
|
@ -2442,7 +2442,7 @@ static_assert( _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
|
|||
#error "PRINTCOUNTER requires EEPROM_SETTINGS. Please update your Configuration."
|
||||
#endif
|
||||
|
||||
#if ENABLED(USB_FLASH_DRIVE_SUPPORT) && !PIN_EXISTS(USB_CS, USB_INTR)
|
||||
#if ENABLED(USB_FLASH_DRIVE_SUPPORT) && !PINS_EXIST(USB_CS, USB_INTR)
|
||||
#error "USB_CS_PIN and USB_INTR_PIN are required for USB_FLASH_DRIVE_SUPPORT."
|
||||
#endif
|
||||
|
||||
|
|
|
|||
|
|
@ -28,7 +28,7 @@
|
|||
#endif
|
||||
|
||||
#define HAS_ENCODER_ACTION (HAS_LCD_MENU || ENABLED(ULTIPANEL_FEEDMULTIPLY))
|
||||
#define HAS_ENCODER_WHEEL ((!HAS_ADC_BUTTONS && ENABLED(NEWPANEL)) || BUTTON_EXISTS(EN1, EN2))
|
||||
#define HAS_ENCODER_WHEEL ((!HAS_ADC_BUTTONS && ENABLED(NEWPANEL)) || BUTTONS_EXIST(EN1, EN2))
|
||||
#define HAS_DIGITAL_BUTTONS (HAS_ENCODER_WHEEL || ANY_BUTTON(ENC, BACK, UP, DWN, LFT, RT))
|
||||
#define HAS_SHIFT_ENCODER (!HAS_ADC_BUTTONS && (ENABLED(REPRAPWORLD_KEYPAD) || (HAS_SPI_LCD && DISABLED(NEWPANEL))))
|
||||
|
||||
|
|
|
|||
|
|
@ -59,7 +59,7 @@
|
|||
);
|
||||
#endif
|
||||
|
||||
#define MAX6675_SEPARATE_SPI (EITHER(HEATER_0_USES_MAX6675, HEATER_1_USES_MAX6675) && PIN_EXISTS(MAX6675_SCK, MAX6675_DO))
|
||||
#define MAX6675_SEPARATE_SPI (EITHER(HEATER_0_USES_MAX6675, HEATER_1_USES_MAX6675) && PINS_EXIST(MAX6675_SCK, MAX6675_DO))
|
||||
|
||||
#if MAX6675_SEPARATE_SPI
|
||||
#include "../libs/private_spi.h"
|
||||
|
|
|
|||
|
|
@ -361,11 +361,11 @@
|
|||
#include "lpc1768/pins_BIQU_B300_V1.0.h" // LPC1768 env:LPC1768
|
||||
#elif MB(GMARSH_X6_REV1)
|
||||
#include "lpc1768/pins_GMARSH_X6_REV1.h" // LPC1768 env:LPC1768
|
||||
#elif MB(BIGTREE_SKR_V1_1)
|
||||
#elif MB(BTT_SKR_V1_1)
|
||||
#include "lpc1768/pins_BTT_SKR_V1_1.h" // LPC1768 env:LPC1768
|
||||
#elif MB(BIGTREE_SKR_V1_3)
|
||||
#elif MB(BTT_SKR_V1_3)
|
||||
#include "lpc1768/pins_BTT_SKR_V1_3.h" // LPC1768 env:LPC1768
|
||||
#elif MB(BIGTREE_SKR_V1_4)
|
||||
#elif MB(BTT_SKR_V1_4)
|
||||
#include "lpc1768/pins_BTT_SKR_V1_4.h" // LPC1768 env:LPC1768
|
||||
|
||||
//
|
||||
|
|
@ -388,7 +388,7 @@
|
|||
#include "lpc1769/pins_SMOOTHIEBOARD.h" // LPC1769 env:LPC1769
|
||||
#elif MB(TH3D_EZBOARD)
|
||||
#include "lpc1769/pins_TH3D_EZBOARD.h" // LPC1769 env:LPC1769
|
||||
#elif MB(BIGTREE_SKR_V1_4_TURBO)
|
||||
#elif MB(BTT_SKR_V1_4_TURBO)
|
||||
#include "lpc1769/pins_BTT_SKR_V1_4_TURBO.h" // LPC1769 env:LPC1769
|
||||
|
||||
//
|
||||
|
|
@ -484,13 +484,13 @@
|
|||
#include "stm32/pins_MKS_ROBIN_NANO.h" // STM32F1 env:mks_robin_nano
|
||||
#elif MB(MKS_ROBIN_LITE)
|
||||
#include "stm32/pins_MKS_ROBIN_LITE.h" // STM32F1 env:mks_robin_lite
|
||||
#elif MB(BIGTREE_SKR_MINI_V1_1)
|
||||
#elif MB(BTT_SKR_MINI_V1_1)
|
||||
#include "stm32/pins_BTT_SKR_MINI_V1_1.h" // STM32F1 env:STM32F103RC_bigtree env:STM32F103RC_bigtree_512K env:STM32F103RC_bigtree_USB env:STM32F103RC_bigtree_512K_USB
|
||||
#elif MB(BTT_SKR_MINI_E3_V1_0)
|
||||
#include "stm32/pins_BTT_SKR_MINI_E3_V1_0.h" // STM32F1 env:STM32F103RC_bigtree env:STM32F103RC_bigtree_512K env:STM32F103RC_bigtree_USB env:STM32F103RC_bigtree_512K_USB
|
||||
#elif MB(BTT_SKR_MINI_E3_V1_2)
|
||||
#include "stm32/pins_BTT_SKR_MINI_E3_V1_2.h" // STM32F1 env:STM32F103RC_bigtree env:STM32F103RC_bigtree_512K env:STM32F103RC_bigtree_USB env:STM32F103RC_bigtree_512K_USB
|
||||
#elif MB(BIGTREE_SKR_E3_DIP)
|
||||
#elif MB(BTT_SKR_E3_DIP)
|
||||
#include "stm32/pins_BTT_SKR_E3_DIP.h" // STM32F1 env:STM32F103RE_bigtree env:STM32F103RE_bigtree_USB env:STM32F103RC_bigtree env:STM32F103RC_bigtree_512K env:STM32F103RC_bigtree_USB env:STM32F103RC_bigtree_512K_USB
|
||||
#elif MB(JGAURORA_A5S_A1)
|
||||
#include "stm32/pins_JGAURORA_A5S_A1.h" // STM32F1 env:jgaurora_a5s_a1
|
||||
|
|
@ -527,16 +527,16 @@
|
|||
#elif MB(ARMED)
|
||||
#include "stm32/pins_ARMED.h" // STM32F4 env:ARMED
|
||||
#elif MB(RUMBA32)
|
||||
#include "stm32/pins_RUMBA32.h" // STM32F4 env:RUMBA32
|
||||
#include "stm32/pins_RUMBA32.h" // STM32F4 env:rumba32_f446ve env:mks_rumba32
|
||||
#elif MB(BLACK_STM32F407VE)
|
||||
#include "stm32/pins_BLACK_STM32F407VE.h" // STM32F4 env:STM32F407VE_black
|
||||
#elif MB(STEVAL_3DP001V1)
|
||||
#include "stm32/pins_STEVAL_3DP001V1.h" // STM32F4 env:STM32F401VE_STEVAL
|
||||
#elif MB(BIGTREE_SKR_PRO_V1_1)
|
||||
#elif MB(BTT_SKR_PRO_V1_1)
|
||||
#include "stm32/pins_BTT_SKR_PRO_V1_1.h" // STM32F4 env:BIGTREE_SKR_PRO
|
||||
#elif MB(BIGTREE_GTR_V1_0)
|
||||
#include "stm32/pins_BTT_GTR_V1_0.h" // STM32F4 env:BIGTREE_GTR
|
||||
#elif MB(BIGTREE_BTT002_V1_0)
|
||||
#elif MB(BTT_GTR_V1_0)
|
||||
#include "stm32/pins_BTT_GTR_V1_0.h" // STM32F4 env:BIGTREE_GTR_V1_0
|
||||
#elif MB(BTT_BTT002_V1_0)
|
||||
#include "stm32/pins_BTT_BTT002_V1_0.h" // STM32F4 env:BIGTREE_BTT002
|
||||
#elif MB(LERDGE_K)
|
||||
#include "stm32/pins_LERDGE_K.h" // STM32F4 env:STM32F4
|
||||
|
|
@ -587,16 +587,24 @@
|
|||
// Obsolete or unknown board
|
||||
//
|
||||
|
||||
#define BOARD_MKS_13 -1000
|
||||
#define BOARD_TRIGORILLA -1001
|
||||
#define BOARD_RURAMPS4D -1002
|
||||
#define BOARD_FORMBOT_TREX2 -1003
|
||||
#define BOARD_BIQU_SKR_V1_1 -1004
|
||||
#define BOARD_STM32F1R -1005
|
||||
#define BOARD_STM32F103R -1006
|
||||
#define BOARD_ESP32 -1007
|
||||
#define BOARD_BIGTREE_SKR_MINI_E3 -1008
|
||||
#define BOARD_STEVAL -1009
|
||||
#define BOARD_MKS_13 -1000
|
||||
#define BOARD_TRIGORILLA -1001
|
||||
#define BOARD_RURAMPS4D -1002
|
||||
#define BOARD_FORMBOT_TREX2 -1003
|
||||
#define BOARD_BIQU_SKR_V1_1 -1004
|
||||
#define BOARD_STM32F1R -1005
|
||||
#define BOARD_STM32F103R -1006
|
||||
#define BOARD_ESP32 -1007
|
||||
#define BOARD_STEVAL -1008
|
||||
#define BOARD_BIGTREE_SKR_V1_1 -1009
|
||||
#define BOARD_BIGTREE_SKR_V1_3 -1010
|
||||
#define BOARD_BIGTREE_SKR_V1_4 -1011
|
||||
#define BOARD_BIGTREE_SKR_V1_4_TURBO -1012
|
||||
#define BOARD_BIGTREE_BTT002_V1_0 -1013
|
||||
#define BOARD_BIGTREE_SKR_PRO_V1_1 -1014
|
||||
#define BOARD_BIGTREE_SKR_MINI_V1_1 -1015
|
||||
#define BOARD_BIGTREE_SKR_MINI_E3 -1016
|
||||
#define BOARD_BIGTREE_SKR_E3_DIP -1017
|
||||
|
||||
#if MB(MKS_13)
|
||||
#error "BOARD_MKS_13 has been renamed BOARD_MKS_GEN_13. Please update your configuration."
|
||||
|
|
@ -607,15 +615,33 @@
|
|||
#elif MB(FORMBOT_TREX2)
|
||||
#error "FORMBOT_TREX2 has been renamed BOARD_FORMBOT_TREX2PLUS. Please update your configuration."
|
||||
#elif MB(BIQU_SKR_V1_1)
|
||||
#error "BOARD_BIQU_SKR_V1_1 has been renamed BOARD_BIGTREE_SKR_V1_1. Please update your configuration."
|
||||
#error "BOARD_BIQU_SKR_V1_1 has been renamed BOARD_BTT_SKR_V1_1. Please update your configuration."
|
||||
#elif MB(BIGTREE_SKR_V1_1)
|
||||
#error "BOARD_BIGTREE_SKR_V1_1 has been renamed BOARD_BTT_SKR_V1_1. Please update your configuration."
|
||||
#elif MB(BIGTREE_SKR_V2_2)
|
||||
#error "BOARD_BIGTREE_SKR_V1_2 has been renamed BOARD_BTT_SKR_V1_2. Please update your configuration."
|
||||
#elif MB(BIGTREE_SKR_V1_3)
|
||||
#error "BOARD_BIGTREE_SKR_V1_3 has been renamed BOARD_BTT_SKR_V1_3. Please update your configuration."
|
||||
#elif MB(BIGTREE_SKR_V1_4)
|
||||
#error "BOARD_BIGTREE_SKR_V1_4 has been renamed BOARD_BTT_SKR_V1_4. Please update your configuration."
|
||||
#elif MB(BIGTREE_SKR_V1_4_TURBO)
|
||||
#error "BOARD_BIGTREE_SKR_V1_4_TURBO has been renamed BOARD_BTT_SKR_V1_4_TURBO. Please update your configuration."
|
||||
#elif MB(BIGTREE_BTT002_V1_0)
|
||||
#error "BOARD_BIGTREE_BTT002_V1_0 has been renamed BOARD_BTT_BTT002_V1_0. Please update your configuration."
|
||||
#elif MB(BIGTREE_SKR_PRO_V1_1)
|
||||
#error "BOARD_BIGTREE_SKR_PRO_V1_1 has been renamed BOARD_BTT_SKR_PRO_V1_1. Please update your configuration."
|
||||
#elif MB(BIGTREE_SKR_MINI_V1_1)
|
||||
#error "BOARD_BIGTREE_SKR_MINI_V1_1 has been renamed BOARD_BTT_SKR_MINI_V1_1. Please update your configuration."
|
||||
#elif MB(BIGTREE_SKR_MINI_E3)
|
||||
#error "BOARD_BIGTREE_SKR_MINI_E3 has been renamed BOARD_BTT_SKR_MINI_E3_V1_0. Please update your configuration."
|
||||
#elif MB(BIGTREE_SKR_E3_DIP)
|
||||
#error "BOARD_BIGTREE_SKR_E3_DIP has been renamed BOARD_BTT_SKR_E3_DIP. Please update your configuration."
|
||||
#elif MB(STM32F1R)
|
||||
#error "BOARD_STM32F1R has been renamed BOARD_STM32F103RE. Please update your configuration."
|
||||
#elif MB(STM32F103R)
|
||||
#error "BOARD_STM32F103R has been renamed BOARD_STM32F103RE. Please update your configuration."
|
||||
#elif MOTHERBOARD == BOARD_ESP32
|
||||
#error "BOARD_ESP32 has been renamed BOARD_ESPRESSIF_ESP32. Please update your configuration."
|
||||
#elif MB(BIGTREE_SKR_MINI_E3)
|
||||
#error "BOARD_BIGTREE_SKR_MINI_E3 has been renamed BOARD_BTT_SKR_MINI_E3_V1_0. Please update your configuration."
|
||||
#elif MB(STEVAL)
|
||||
#error "BOARD_STEVAL has been renamed BOARD_STEVAL_3DP001V1. Please update your configuration."
|
||||
#else
|
||||
|
|
@ -630,8 +656,16 @@
|
|||
#undef BOARD_STM32F1R
|
||||
#undef BOARD_STM32F103R
|
||||
#undef BOARD_ESP32
|
||||
#undef BOARD_BIGTREE_SKR_MINI_E3
|
||||
#undef BOARD_STEVAL
|
||||
#undef BOARD_BIGTREE_SKR_MINI_E3
|
||||
#undef BOARD_BIGTREE_SKR_V1_1
|
||||
#undef BOARD_BIGTREE_SKR_V1_3
|
||||
#undef BOARD_BIGTREE_SKR_V1_4
|
||||
#undef BOARD_BIGTREE_SKR_V1_4_TURBO
|
||||
#undef BOARD_BIGTREE_BTT002_V1_0
|
||||
#undef BOARD_BIGTREE_SKR_PRO_V1_1
|
||||
#undef BOARD_BIGTREE_SKR_MINI_V1_1
|
||||
#undef BOARD_BIGTREE_SKR_E3_DIP
|
||||
|
||||
#endif
|
||||
|
||||
|
|
|
|||
|
|
@ -168,7 +168,7 @@ const PinInfo pin_array[] PROGMEM = {
|
|||
#endif
|
||||
|
||||
#include "pinsDebug_list.h"
|
||||
#line 98
|
||||
#line 172
|
||||
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -26,425 +26,72 @@
|
|||
|
||||
#line 28 // set __LINE__ to a known value for both passes
|
||||
|
||||
// Undefine pins to suppress warnings
|
||||
#if !PIN_EXISTS(X_MS1)
|
||||
#undef X_MS1_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(X_MS2)
|
||||
#undef X_MS2_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(X_MS3)
|
||||
#undef X_MS3_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(X2_MS1)
|
||||
#undef X2_MS1_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(X2_MS2)
|
||||
#undef X2_MS2_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(X2_MS3)
|
||||
#undef X2_MS3_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(Y_MS1)
|
||||
#undef Y_MS1_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(Y_MS2)
|
||||
#undef Y_MS2_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(Y_MS3)
|
||||
#undef Y_MS3_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(Y2_MS1)
|
||||
#undef Y2_MS1_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(Y2_MS2)
|
||||
#undef Y2_MS2_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(Y2_MS3)
|
||||
#undef Y2_MS3_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(Z_MS1)
|
||||
#undef Z_MS1_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(Z_MS2)
|
||||
#undef Z_MS2_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(Z_MS3)
|
||||
#undef Z_MS3_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(Z2_MS1)
|
||||
#undef Z2_MS1_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(Z2_MS2)
|
||||
#undef Z2_MS2_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(Z2_MS3)
|
||||
#undef Z2_MS3_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(Z3_MS1)
|
||||
#undef Z3_MS1_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(Z3_MS2)
|
||||
#undef Z3_MS2_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(Z3_MS3)
|
||||
#undef Z3_MS3_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(Z4_MS1)
|
||||
#undef Z4_MS1_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(Z4_MS2)
|
||||
#undef Z4_MS2_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(Z4_MS3)
|
||||
#undef Z4_MS3_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E0_MS1)
|
||||
#undef E0_MS1_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E0_MS2)
|
||||
#undef E0_MS2_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E0_MS3)
|
||||
#undef E0_MS3_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E1_MS1)
|
||||
#undef E1_MS1_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E1_MS2)
|
||||
#undef E1_MS2_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E1_MS3)
|
||||
#undef E1_MS3_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E2_MS1)
|
||||
#undef E2_MS1_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E2_MS2)
|
||||
#undef E2_MS2_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E2_MS3)
|
||||
#undef E2_MS3_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E3_MS1)
|
||||
#undef E3_MS1_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E3_MS2)
|
||||
#undef E3_MS2_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E3_MS3)
|
||||
#undef E3_MS3_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E4_MS1)
|
||||
#undef E4_MS1_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E4_MS2)
|
||||
#undef E4_MS2_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E4_MS3)
|
||||
#undef E4_MS3_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E5_MS1)
|
||||
#undef E5_MS1_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E5_MS2)
|
||||
#undef E5_MS2_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E5_MS3)
|
||||
#undef E5_MS3_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E6_MS1)
|
||||
#undef E6_MS1_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E6_MS2)
|
||||
#undef E6_MS2_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E6_MS3)
|
||||
#undef E6_MS3_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E7_MS1)
|
||||
#undef E7_MS1_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E7_MS2)
|
||||
#undef E7_MS2_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E7_MS3)
|
||||
#undef E7_MS3_PIN
|
||||
#endif
|
||||
|
||||
#if !PIN_EXISTS(E0_STEP)
|
||||
#undef E0_STEP_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E0_DIR)
|
||||
#undef E0_DIR_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E0_ENABLE)
|
||||
#undef E0_ENABLE_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E1_STEP)
|
||||
#undef E1_STEP_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E1_DIR)
|
||||
#undef E1_DIR_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E1_ENABLE)
|
||||
#undef E1_ENABLE_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E2_STEP)
|
||||
#undef E2_STEP_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E2_DIR)
|
||||
#undef E2_DIR_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E2_ENABLE)
|
||||
#undef E2_ENABLE_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E3_STEP)
|
||||
#undef E3_STEP_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E3_DIR)
|
||||
#undef E3_DIR_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E3_ENABLE)
|
||||
#undef E3_ENABLE_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E4_STEP)
|
||||
#undef E4_STEP_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E4_DIR)
|
||||
#undef E4_DIR_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E4_ENABLE)
|
||||
#undef E4_ENABLE_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E5_STEP)
|
||||
#undef E5_STEP_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E5_DIR)
|
||||
#undef E5_DIR_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E5_ENABLE)
|
||||
#undef E5_ENABLE_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E6_STEP)
|
||||
#undef E6_STEP_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E6_DIR)
|
||||
#undef E6_DIR_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E6_ENABLE)
|
||||
#undef E6_ENABLE_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E7_STEP)
|
||||
#undef E7_STEP_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E7_DIR)
|
||||
#undef E7_DIR_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E7_ENABLE)
|
||||
#undef E7_ENABLE_PIN
|
||||
#endif
|
||||
|
||||
#if !PIN_EXISTS(X_CS)
|
||||
#undef X_CS_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(Y_CS)
|
||||
#undef Y_CS_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(Z_CS)
|
||||
#undef Z_CS_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E0_CS)
|
||||
#undef E0_CS_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E1_CS)
|
||||
#undef E1_CS_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E2_CS)
|
||||
#undef E2_CS_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E3_CS)
|
||||
#undef E3_CS_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E4_CS)
|
||||
#undef E4_CS_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E5_CS)
|
||||
#undef E5_CS_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E6_CS)
|
||||
#undef E6_CS_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(E7_CS)
|
||||
#undef E7_CS_PIN
|
||||
#endif
|
||||
|
||||
#if !PIN_EXISTS(FAN)
|
||||
#undef FAN_PIN
|
||||
#endif
|
||||
#define FAN0_PIN FAN_PIN
|
||||
#if !PIN_EXISTS(FAN1)
|
||||
#undef FAN1_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(FAN2)
|
||||
#undef FAN2_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(FAN3)
|
||||
#undef FAN3_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(FAN4)
|
||||
#undef FAN4_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(FAN5)
|
||||
#undef FAN5_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(FAN6)
|
||||
#undef FAN6_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(FAN7)
|
||||
#undef FAN7_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(CONTROLLER_FAN)
|
||||
#undef CONTROLLER_FAN_PIN
|
||||
#endif
|
||||
|
||||
#if !PIN_EXISTS(FANMUX0)
|
||||
#undef FANMUX0_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(FANMUX1)
|
||||
#undef FANMUX1_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(FANMUX2)
|
||||
#undef FANMUX2_PIN
|
||||
#endif
|
||||
|
||||
#if !PIN_EXISTS(HEATER_0)
|
||||
#undef HEATER_0_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(HEATER_1)
|
||||
#undef HEATER_1_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(HEATER_2)
|
||||
#undef HEATER_2_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(HEATER_3)
|
||||
#undef HEATER_3_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(HEATER_4)
|
||||
#undef HEATER_4_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(HEATER_5)
|
||||
#undef HEATER_5_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(HEATER_6)
|
||||
#undef HEATER_6_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(HEATER_7)
|
||||
#undef HEATER_7_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(HEATER_BED)
|
||||
#undef HEATER_BED_PIN
|
||||
#endif
|
||||
|
||||
#if !PIN_EXISTS(TEMP_0)
|
||||
#undef TEMP_0_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(TEMP_1)
|
||||
#undef TEMP_1_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(TEMP_2)
|
||||
#undef TEMP_2_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(TEMP_3)
|
||||
#undef TEMP_3_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(TEMP_4)
|
||||
#undef TEMP_4_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(TEMP_5)
|
||||
#undef TEMP_5_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(TEMP_6)
|
||||
#undef TEMP_6_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(TEMP_7)
|
||||
#undef TEMP_7_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(TEMP_BED)
|
||||
#undef TEMP_BED_PIN
|
||||
#endif
|
||||
|
||||
#if !PIN_EXISTS(SD_DETECT)
|
||||
#undef SD_DETECT_PIN
|
||||
#endif
|
||||
#if !PIN_EXISTS(SDPOWER)
|
||||
#undef SDPOWER_PIN
|
||||
#endif
|
||||
|
||||
//
|
||||
// Analog Pin Assignments
|
||||
//
|
||||
|
||||
#if defined(EXT_AUX_A0) && EXT_AUX_A0 >= 0 && EXT_AUX_A0 < NUM_ANALOG_INPUTS
|
||||
#define ANALOG_OK(PN) ((PN) >= 0 && (PN) < NUM_ANALOG_PINS)
|
||||
|
||||
#if defined(EXT_AUX_A0) && ANALOG_OK(EXT_AUX_A0)
|
||||
REPORT_NAME_ANALOG(__LINE__, EXT_AUX_A0)
|
||||
#endif
|
||||
#if defined(EXT_AUX_A1) && EXT_AUX_A1 >= 0 && EXT_AUX_A1 < NUM_ANALOG_INPUTS
|
||||
#if defined(EXT_AUX_A1) && ANALOG_OK(EXT_AUX_A0)
|
||||
REPORT_NAME_ANALOG(__LINE__, EXT_AUX_A1)
|
||||
#endif
|
||||
#if defined(EXT_AUX_A2) && EXT_AUX_A2 >= 0 && EXT_AUX_A2 < NUM_ANALOG_INPUTS
|
||||
#if defined(EXT_AUX_A2) && ANALOG_OK(EXT_AUX_A0)
|
||||
REPORT_NAME_ANALOG(__LINE__, EXT_AUX_A2)
|
||||
#endif
|
||||
#if defined(EXT_AUX_A3) && EXT_AUX_A3 >= 0 && EXT_AUX_A3 < NUM_ANALOG_INPUTS
|
||||
#if defined(EXT_AUX_A3) && ANALOG_OK(EXT_AUX_A0)
|
||||
REPORT_NAME_ANALOG(__LINE__, EXT_AUX_A3)
|
||||
#endif
|
||||
#if defined(EXT_AUX_A4) && EXT_AUX_A4 >= 0 && EXT_AUX_A4 < NUM_ANALOG_INPUTS
|
||||
#if defined(EXT_AUX_A4) && ANALOG_OK(EXT_AUX_A0)
|
||||
REPORT_NAME_ANALOG(__LINE__, EXT_AUX_A4)
|
||||
#endif
|
||||
#if PIN_EXISTS(FILWIDTH) && FILWIDTH_PIN < NUM_ANALOG_INPUTS
|
||||
#if PIN_EXISTS(FILWIDTH) && ANALOG_OK(FILWIDTH_PIN)
|
||||
REPORT_NAME_ANALOG(__LINE__, FILWIDTH_PIN)
|
||||
#endif
|
||||
#if PIN_EXISTS(MAIN_VOLTAGE_MEASURE) && MAIN_VOLTAGE_MEASURE_PIN < NUM_ANALOG_INPUTS
|
||||
#if PIN_EXISTS(MAIN_VOLTAGE_MEASURE) && ANALOG_OK(MAIN_VOLTAGE_MEASURE_PIN)
|
||||
REPORT_NAME_ANALOG(__LINE__, MAIN_VOLTAGE_MEASURE_PIN)
|
||||
#endif
|
||||
#if !defined(ARDUINO_ARCH_SAM) && !defined(ARDUINO_ARCH_SAMD) //TC1 & TC2 are macros in the SAM/SAMD tool chain
|
||||
#if defined(TC1) && TC1 >= 0 && TC1 < NUM_ANALOG_INPUTS
|
||||
#if !defined(ARDUINO_ARCH_SAM) && !defined(ARDUINO_ARCH_SAMD) // TC1 & TC2 are macros in the SAM/SAMD tool chain
|
||||
#if defined(TC1) && ANALOG_OK(TC1)
|
||||
REPORT_NAME_ANALOG(__LINE__, TC1)
|
||||
#endif
|
||||
#if defined(TC2) && TC2 >= 0 && TC2 < NUM_ANALOG_INPUTS
|
||||
#if defined(TC2) && ANALOG_OK(TC1)
|
||||
REPORT_NAME_ANALOG(__LINE__, TC2)
|
||||
#endif
|
||||
#endif
|
||||
#if PIN_EXISTS(TEMP_0) && TEMP_0_PIN < NUM_ANALOG_INPUTS
|
||||
#if PIN_EXISTS(TEMP_0) && ANALOG_OK(TEMP_0_PIN)
|
||||
REPORT_NAME_ANALOG(__LINE__, TEMP_0_PIN)
|
||||
#endif
|
||||
#if PIN_EXISTS(TEMP_1) && TEMP_1_PIN < NUM_ANALOG_INPUTS
|
||||
#if PIN_EXISTS(TEMP_1) && ANALOG_OK(TEMP_1_PIN)
|
||||
REPORT_NAME_ANALOG(__LINE__, TEMP_1_PIN)
|
||||
#endif
|
||||
#if PIN_EXISTS(TEMP_2) && TEMP_2_PIN < NUM_ANALOG_INPUTS
|
||||
#if PIN_EXISTS(TEMP_2) && ANALOG_OK(TEMP_2_PIN)
|
||||
REPORT_NAME_ANALOG(__LINE__, TEMP_2_PIN)
|
||||
#endif
|
||||
#if PIN_EXISTS(TEMP_3) && TEMP_3_PIN < NUM_ANALOG_INPUTS
|
||||
#if PIN_EXISTS(TEMP_3) && ANALOG_OK(TEMP_3_PIN)
|
||||
REPORT_NAME_ANALOG(__LINE__, TEMP_3_PIN)
|
||||
#endif
|
||||
#if PIN_EXISTS(TEMP_4) && TEMP_4_PIN < NUM_ANALOG_INPUTS
|
||||
#if PIN_EXISTS(TEMP_4) && ANALOG_OK(TEMP_4_PIN)
|
||||
REPORT_NAME_ANALOG(__LINE__, TEMP_4_PIN)
|
||||
#endif
|
||||
#if PIN_EXISTS(TEMP_5) && TEMP_5_PIN < NUM_ANALOG_INPUTS
|
||||
#if PIN_EXISTS(TEMP_5) && ANALOG_OK(TEMP_5_PIN)
|
||||
REPORT_NAME_ANALOG(__LINE__, TEMP_5_PIN)
|
||||
#endif
|
||||
#if PIN_EXISTS(TEMP_6) && TEMP_6_PIN < NUM_ANALOG_INPUTS
|
||||
#if PIN_EXISTS(TEMP_6) && ANALOG_OK(TEMP_6_PIN)
|
||||
REPORT_NAME_ANALOG(__LINE__, TEMP_6_PIN)
|
||||
#endif
|
||||
#if PIN_EXISTS(TEMP_7) && TEMP_7_PIN < NUM_ANALOG_INPUTS
|
||||
#if PIN_EXISTS(TEMP_7) && ANALOG_OK(TEMP_7_PIN)
|
||||
REPORT_NAME_ANALOG(__LINE__, TEMP_7_PIN)
|
||||
#endif
|
||||
#if PIN_EXISTS(TEMP_BED) && TEMP_BED_PIN < NUM_ANALOG_INPUTS
|
||||
#if PIN_EXISTS(TEMP_BED) && ANALOG_OK(TEMP_BED_PIN)
|
||||
REPORT_NAME_ANALOG(__LINE__, TEMP_BED_PIN)
|
||||
#endif
|
||||
#if PIN_EXISTS(TEMP_CHAMBER) && TEMP_CHAMBER_PIN < NUM_ANALOG_INPUTS
|
||||
#if PIN_EXISTS(TEMP_CHAMBER) && ANALOG_OK(TEMP_CHAMBER_PIN)
|
||||
REPORT_NAME_ANALOG(__LINE__, TEMP_CHAMBER_PIN)
|
||||
#endif
|
||||
#if PIN_EXISTS(ADC_KEYPAD) && ADC_KEYPAD_PIN < NUM_ANALOG_INPUTS
|
||||
#if PIN_EXISTS(ADC_KEYPAD) && ANALOG_OK(ADC_KEYPAD_PIN)
|
||||
REPORT_NAME_ANALOG(__LINE__, ADC_KEYPAD_PIN)
|
||||
#endif
|
||||
|
||||
|
|
|
|||
|
|
@ -19,6 +19,9 @@
|
|||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
// https://github.com/ktand/Armed
|
||||
|
||||
#pragma once
|
||||
|
||||
#ifndef STM32F4
|
||||
|
|
|
|||
|
|
@ -108,7 +108,6 @@
|
|||
//
|
||||
// Misc. Functions
|
||||
//
|
||||
#define SDSS PB12
|
||||
#define LED_PIN PA6
|
||||
//#define LED_PIN PA7
|
||||
#define KILL_PIN PB1
|
||||
|
|
@ -116,7 +115,7 @@
|
|||
//
|
||||
// LCD / Controller
|
||||
//
|
||||
#define SD_DETECT_PIN PC5
|
||||
//#define SD_DETECT_PIN PC5
|
||||
//#define SD_DETECT_PIN PA8 // SDIO SD_DETECT_PIN, external SDIO card reader only
|
||||
|
||||
#define BEEPER_PIN PD10
|
||||
|
|
@ -132,3 +131,25 @@
|
|||
|
||||
#define DOGLCD_CS LCD_PINS_D5
|
||||
#define DOGLCD_A0 LCD_PINS_D6
|
||||
|
||||
//
|
||||
// Onboard SD support
|
||||
//
|
||||
#define SDIO_D0_PIN PC8
|
||||
#define SDIO_D1_PIN PC9
|
||||
#define SDIO_D2_PIN PC10
|
||||
#define SDIO_D3_PIN PC11
|
||||
#define SDIO_CK_PIN PC12
|
||||
#define SDIO_CMD_PIN PD2
|
||||
|
||||
#if !defined(SDCARD_CONNECTION) || SDCARD_CONNECTION == ONBOARD
|
||||
#define SDIO_SUPPORT // Use SDIO for onboard SD
|
||||
|
||||
#ifndef SDIO_SUPPORT
|
||||
#define SOFTWARE_SPI // Use soft SPI for onboard SD
|
||||
#define SDSS SDIO_D3_PIN
|
||||
#define SCK_PIN SDIO_CK_PIN
|
||||
#define MISO_PIN SDIO_D0_PIN
|
||||
#define MOSI_PIN SDIO_CMD_PIN
|
||||
#endif
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -181,7 +181,21 @@
|
|||
//
|
||||
// Misc. Functions
|
||||
//
|
||||
#define SDSS PB12
|
||||
|
||||
//
|
||||
// Onboard SD card
|
||||
// NOT compatible with LCD
|
||||
//
|
||||
#if SDCARD_CONNECTION == ONBOARD && !defined(HAS_SPI_LCD)
|
||||
#define SOFTWARE_SPI // Use soft SPI for onboard SD
|
||||
#define SDSS PA4
|
||||
#define SCK_PIN PA5
|
||||
#define MISO_PIN PA6
|
||||
#define MOSI_PIN PB5
|
||||
#else
|
||||
#define SDSS PB12
|
||||
#endif
|
||||
|
||||
|
||||
/**
|
||||
* _____ _____
|
||||
|
|
|
|||
|
|
@ -152,6 +152,30 @@
|
|||
#define FAN4_PIN PE13
|
||||
#define FAN5_PIN PB11
|
||||
|
||||
//
|
||||
// Onboard SD support
|
||||
//
|
||||
|
||||
#define SDIO_D0_PIN PC8
|
||||
#define SDIO_D1_PIN PC9
|
||||
//#define SD_CARD_DETECT_PIN PC13
|
||||
#define SDIO_D2_PIN PC10
|
||||
#define SDIO_D3_PIN PC11
|
||||
#define SDIO_CK_PIN PC12
|
||||
#define SDIO_CMD_PIN PD2
|
||||
|
||||
#if !defined(SDCARD_CONNECTION) || SDCARD_CONNECTION == ONBOARD
|
||||
#define SDIO_SUPPORT // Use SDIO for onboard SD
|
||||
|
||||
#ifndef SDIO_SUPPORT
|
||||
#define SOFTWARE_SPI // Use soft SPI for onboard SD
|
||||
#define SDSS SDIO_D3_PIN
|
||||
#define SCK_PIN SDIO_CK_PIN
|
||||
#define MISO_PIN SDIO_D0_PIN
|
||||
#define MOSI_PIN SDIO_CMD_PIN
|
||||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Trinamic Software SPI
|
||||
//
|
||||
|
|
|
|||
|
|
@ -226,22 +226,27 @@
|
|||
// 22 // PB3 JTAG_TDO/SWO
|
||||
|
||||
//
|
||||
// SD support
|
||||
// Onboard SD support
|
||||
//
|
||||
//#define SDIO_SUPPORT
|
||||
// 23 // PC8 SDIO_D0
|
||||
// 24 // PC9 SDIO_D1
|
||||
// 25 // PA15 SD_CARD_DETECT
|
||||
// 26 // PC10 SDIO_D2
|
||||
// 27 // PC11 SDIO_D3
|
||||
// 28 // PC12 SDIO_CK
|
||||
// 29 // PD2 SDIO_CMD
|
||||
#define SDIO_D0_PIN 23 // PC8 SDIO_D0
|
||||
#define SDIO_D1_PIN 24 // PC9 SDIO_D1
|
||||
//#define SD_CARD_DETECT_PIN 25 // PA15 SD_CARD_DETECT
|
||||
#define SDIO_D2_PIN 26 // PC10 SDIO_D2
|
||||
#define SDIO_D3_PIN 27 // PC11 SDIO_D3
|
||||
#define SDIO_CK_PIN 28 // PC12 SDIO_CK
|
||||
#define SDIO_CMD_PIN 29 // PD2 SDIO_CMD
|
||||
|
||||
#define SOFTWARE_SPI // Use soft SPI for onboard SD
|
||||
#define SDSS 27 // PC11 SDIO_D3
|
||||
#define SCK_PIN 28 // PC12 SDIO_CK
|
||||
#define MISO_PIN 23 // PC8 SDIO_D0
|
||||
#define MOSI_PIN 29 // PD2 SDIO_CMD
|
||||
#if !defined(SDCARD_CONNECTION) || SDCARD_CONNECTION == ONBOARD
|
||||
#define SDIO_SUPPORT // Use SDIO for onboard SD
|
||||
|
||||
#ifndef SDIO_SUPPORT
|
||||
#define SOFTWARE_SPI // Use soft SPI for onboard SD
|
||||
#define SDSS SDIO_D3_PIN
|
||||
#define SCK_PIN SDIO_CK_PIN
|
||||
#define MISO_PIN SDIO_D0_PIN
|
||||
#define MOSI_PIN SDIO_CMD_PIN
|
||||
#endif
|
||||
#endif
|
||||
|
||||
// OTG
|
||||
// 30 // PA11 OTG_DM
|
||||
|
|
|
|||
|
|
@ -195,7 +195,7 @@ extern "C" {
|
|||
#define PIN_SERIAL2_RX PD6
|
||||
#define PIN_SERIAL2_TX PD5
|
||||
#else
|
||||
#error'Invaqlid setting for SERIAL_UART_INSTANCE'
|
||||
#error'Invalid setting for SERIAL_UART_INSTANCE'
|
||||
#endif
|
||||
|
||||
// Timer Definitions
|
||||
|
|
|
|||
|
|
@ -10,7 +10,7 @@ set -e
|
|||
# Build with the default configurations
|
||||
#
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_BIGTREE_BTT002_V1_0
|
||||
opt_set MOTHERBOARD BOARD_BTT_BTT002_V1_0
|
||||
opt_set SERIAL_PORT 1
|
||||
exec_test $1 $2 "BigTreeTech BTT002 Default Configuration"
|
||||
|
||||
|
|
|
|||
|
|
@ -10,7 +10,7 @@ set -e
|
|||
# Build with the default configurations
|
||||
#
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_BIGTREE_SKR_PRO_V1_1
|
||||
opt_set MOTHERBOARD BOARD_BTT_SKR_PRO_V1_1
|
||||
opt_set SERIAL_PORT 1
|
||||
exec_test $1 $2 "BigTreeTech SKR Pro Default Configuration"
|
||||
|
||||
|
|
|
|||
|
|
@ -10,7 +10,7 @@ set -e
|
|||
# Build with the default configurations
|
||||
#
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_BIGTREE_SKR_MINI_V1_1
|
||||
opt_set MOTHERBOARD BOARD_BTT_SKR_MINI_V1_1
|
||||
opt_set SERIAL_PORT 1
|
||||
opt_set SERIAL_PORT_2 -1
|
||||
exec_test $1 $2 "BigTreeTech SKR Mini v1.1 - Basic Configuration"
|
||||
|
|
|
|||
|
|
@ -10,7 +10,7 @@ set -e
|
|||
# Build with the default configurations
|
||||
#
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_BIGTREE_SKR_E3_DIP
|
||||
opt_set MOTHERBOARD BOARD_BTT_SKR_E3_DIP
|
||||
opt_set SERIAL_PORT 1
|
||||
opt_set SERIAL_PORT_2 -1
|
||||
exec_test $1 $2 "BigTreeTech SKR E3 DIP v1.0 - Basic Configuration"
|
||||
|
|
|
|||
|
|
@ -10,7 +10,7 @@ set -e
|
|||
# Build with the default configurations
|
||||
#
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_BIGTREE_SKR_E3_DIP
|
||||
opt_set MOTHERBOARD BOARD_BTT_SKR_E3_DIP
|
||||
opt_set SERIAL_PORT 1
|
||||
opt_set SERIAL_PORT_2 -1
|
||||
exec_test $1 $2 "BigTreeTech SKR E3 DIP v1.0 - Basic Configuration"
|
||||
|
|
|
|||
Reference in a new issue