Keep C extension for now, restore (void) arg (#15380)

This commit is contained in:
Marcio Teixeira 2019-09-27 13:02:35 -06:00 committed by Scott Lahteine
parent a8aca59c04
commit 02bbc51195
17 changed files with 263 additions and 263 deletions

View file

@ -174,11 +174,11 @@ static xSemaphoreHandle ctrl_access_semphr = NULL;
//! LUN descriptor table.
static const struct
{
Ctrl_status (*test_unit_ready)();
Ctrl_status (*test_unit_ready)(void);
Ctrl_status (*read_capacity)(U32 *);
bool (*unload)(bool);
bool (*wr_protect)();
bool (*removal)();
bool (*wr_protect)(void);
bool (*removal)(void);
#if ACCESS_USB == true
Ctrl_status (*usb_read_10)(U32, U16);
Ctrl_status (*usb_write_10)(U32, U16);
@ -255,7 +255,7 @@ bool g_wr_protect;
#ifdef FREERTOS_USED
bool ctrl_access_init()
bool ctrl_access_init(void)
{
// If the handle to the protecting semaphore is not valid,
if (!ctrl_access_semphr)
@ -275,7 +275,7 @@ bool ctrl_access_init()
*
* \return \c true if the access was successfully locked, else \c false.
*/
static bool ctrl_access_lock()
static bool ctrl_access_lock(void)
{
// If the semaphore could not be created, there is no backup solution.
if (!ctrl_access_semphr) return false;
@ -289,7 +289,7 @@ static bool ctrl_access_lock()
#endif // FREERTOS_USED
U8 get_nb_lun()
U8 get_nb_lun(void)
{
#if MEM_USB == ENABLE
# ifndef Lun_usb_get_lun
@ -310,7 +310,7 @@ U8 get_nb_lun()
}
U8 get_cur_lun()
U8 get_cur_lun(void)
{
return LUN_ID_0;
}

View file

@ -191,7 +191,7 @@ extern bool g_wr_protect;
*
* \return \c true if the locker was successfully initialized, else \c false.
*/
extern bool ctrl_access_init();
extern bool ctrl_access_init(void);
#endif // FREERTOS_USED
@ -199,7 +199,7 @@ extern bool ctrl_access_init();
*
* \return Number of LUNs in the system.
*/
extern U8 get_nb_lun();
extern U8 get_nb_lun(void);
/*! \brief Returns the current LUN.
*
@ -207,7 +207,7 @@ extern U8 get_nb_lun();
*
* \todo Implement.
*/
extern U8 get_cur_lun();
extern U8 get_cur_lun(void);
/*! \brief Tests the memory state and initializes the memory if required.
*

View file

@ -78,7 +78,7 @@
//!
//! @brief This function initializes the hw/sw resources required to drive the SD_MMC_SPI.
//!/
extern void sd_mmc_spi_mem_init();
extern void sd_mmc_spi_mem_init(void);
//!
//! @brief This function tests the state of the SD_MMC memory and sends it to the Host.
@ -91,7 +91,7 @@ extern void sd_mmc_spi_mem_init();
//! Media not present -> CTRL_NO_PRESENT
//! Media has changed -> CTRL_BUSY
//!/
extern Ctrl_status sd_mmc_spi_test_unit_ready();
extern Ctrl_status sd_mmc_spi_test_unit_ready(void);
//!
//! @brief This function gives the address of the last valid sector.
@ -124,14 +124,14 @@ extern bool sd_mmc_spi_unload(bool unload);
//!
//! @return false -> the memory is not write-protected (always)
//!/
extern bool sd_mmc_spi_wr_protect();
extern bool sd_mmc_spi_wr_protect(void);
//!
//! @brief This function tells if the memory has been removed or not.
//!
//! @return false -> The memory isn't removed
//!
extern bool sd_mmc_spi_removal();
extern bool sd_mmc_spi_removal(void);
//---- ACCESS DATA FONCTIONS ----

View file

@ -71,7 +71,7 @@ extern "C" {
* \param pll_id Source of the USB clock.
* \param div Actual clock divisor. Must be superior to 0.
*/
void sysclk_enable_usb()
void sysclk_enable_usb(void)
{
Assert(CONFIG_USBCLK_DIV > 0);
@ -103,7 +103,7 @@ void sysclk_enable_usb()
*
* \note This implementation does not switch off the PLL, it just turns off the USB clock.
*/
void sysclk_disable_usb()
void sysclk_disable_usb(void)
{
pmc_disable_udpck();
}

View file

@ -213,8 +213,8 @@ extern "C" {
#endif
extern void sysclk_enable_usb();
extern void sysclk_disable_usb();
extern void sysclk_enable_usb(void);
extern void sysclk_disable_usb(void);
//! @}

View file

@ -132,14 +132,14 @@ static uint8_t udc_string_product_name[] = USB_DEVICE_PRODUCT_NAME;
* define USB_DEVICE_GET_SERIAL_NAME_LENGTH.
*/
#if defined USB_DEVICE_GET_SERIAL_NAME_POINTER
static const uint8_t *udc_get_string_serial_name()
static const uint8_t *udc_get_string_serial_name(void)
{
return (const uint8_t *)USB_DEVICE_GET_SERIAL_NAME_POINTER;
}
# define USB_DEVICE_SERIAL_NAME_SIZE \
USB_DEVICE_GET_SERIAL_NAME_LENGTH
#elif defined USB_DEVICE_SERIAL_NAME
static const uint8_t *udc_get_string_serial_name()
static const uint8_t *udc_get_string_serial_name(void)
{
return (const uint8_t *)USB_DEVICE_SERIAL_NAME;
}
@ -164,7 +164,7 @@ static UDC_DESC_STORAGE struct udc_string_desc_t udc_string_desc = {
};
//! @}
usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc()
usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc(void)
{
return udc_ptr_iface;
}
@ -174,7 +174,7 @@ usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc()
*
* \return address after the last byte of USB Configuration descriptor
*/
static usb_conf_desc_t UDC_DESC_STORAGE *udc_get_eof_conf()
static usb_conf_desc_t UDC_DESC_STORAGE *udc_get_eof_conf(void)
{
return (UDC_DESC_STORAGE usb_conf_desc_t *) ((uint8_t *)
udc_ptr_conf->desc +
@ -360,14 +360,14 @@ static bool udc_iface_enable(uint8_t iface_num, uint8_t setting_num)
/*! \brief Start the USB Device stack
*/
void udc_start()
void udc_start(void)
{
udd_enable();
}
/*! \brief Stop the USB Device stack
*/
void udc_stop()
void udc_stop(void)
{
udd_disable();
udc_reset();
@ -377,7 +377,7 @@ void udc_stop()
* \brief Reset the current configuration of the USB device,
* This routines can be called by UDD when a RESET on the USB line occurs.
*/
void udc_reset()
void udc_reset(void)
{
uint8_t iface_num;
@ -404,7 +404,7 @@ void udc_reset()
#endif
}
void udc_sof_notify()
void udc_sof_notify(void)
{
uint8_t iface_num;
@ -424,7 +424,7 @@ void udc_sof_notify()
*
* \return true if success
*/
static bool udc_req_std_dev_get_status()
static bool udc_req_std_dev_get_status(void)
{
if (udd_g_ctrlreq.req.wLength != sizeof(udc_device_status)) {
return false;
@ -441,7 +441,7 @@ static bool udc_req_std_dev_get_status()
*
* \return true if success
*/
static bool udc_req_std_ep_get_status()
static bool udc_req_std_ep_get_status(void)
{
static le16_t udc_ep_status;
@ -463,7 +463,7 @@ static bool udc_req_std_ep_get_status()
*
* \return true if success
*/
static bool udc_req_std_dev_clear_feature()
static bool udc_req_std_dev_clear_feature(void)
{
if (udd_g_ctrlreq.req.wLength) {
return false;
@ -486,7 +486,7 @@ static bool udc_req_std_dev_clear_feature()
*
* \return true if success
*/
static bool udc_req_std_ep_clear_feature()
static bool udc_req_std_ep_clear_feature(void)
{
if (udd_g_ctrlreq.req.wLength) {
return false;
@ -504,7 +504,7 @@ static bool udc_req_std_ep_clear_feature()
*
* \return true if success
*/
static bool udc_req_std_dev_set_feature()
static bool udc_req_std_dev_set_feature(void)
{
if (udd_g_ctrlreq.req.wLength) {
return false;
@ -567,7 +567,7 @@ static bool udc_req_std_dev_set_feature()
* \return true if success
*/
#if (0!=USB_DEVICE_MAX_EP)
static bool udc_req_std_ep_set_feature()
static bool udc_req_std_ep_set_feature(void)
{
if (udd_g_ctrlreq.req.wLength) {
return false;
@ -584,7 +584,7 @@ static bool udc_req_std_ep_set_feature()
* \brief Change the address of device
* Callback called at the end of request set address
*/
static void udc_valid_address()
static void udc_valid_address(void)
{
udd_set_address(udd_g_ctrlreq.req.wValue & 0x7F);
}
@ -594,7 +594,7 @@ static void udc_valid_address()
*
* \return true if success
*/
static bool udc_req_std_dev_set_address()
static bool udc_req_std_dev_set_address(void)
{
if (udd_g_ctrlreq.req.wLength) {
return false;
@ -611,7 +611,7 @@ static bool udc_req_std_dev_set_address()
*
* \return true if success
*/
static bool udc_req_std_dev_get_str_desc()
static bool udc_req_std_dev_get_str_desc(void)
{
uint8_t i;
const uint8_t *str;
@ -670,7 +670,7 @@ static bool udc_req_std_dev_get_str_desc()
*
* \return true if success
*/
static bool udc_req_std_dev_get_descriptor()
static bool udc_req_std_dev_get_descriptor(void)
{
uint8_t conf_num;
@ -787,7 +787,7 @@ static bool udc_req_std_dev_get_descriptor()
*
* \return true if success
*/
static bool udc_req_std_dev_get_configuration()
static bool udc_req_std_dev_get_configuration(void)
{
if (udd_g_ctrlreq.req.wLength != 1) {
return false;
@ -802,7 +802,7 @@ static bool udc_req_std_dev_get_configuration()
*
* \return true if success
*/
static bool udc_req_std_dev_set_configuration()
static bool udc_req_std_dev_set_configuration(void)
{
uint8_t iface_num;
@ -867,7 +867,7 @@ static bool udc_req_std_dev_set_configuration()
*
* \return true if success
*/
static bool udc_req_std_iface_get_setting()
static bool udc_req_std_iface_get_setting(void)
{
uint8_t iface_num;
udi_api_t UDC_DESC_STORAGE *udi_api;
@ -905,7 +905,7 @@ static bool udc_req_std_iface_get_setting()
*
* \return true if success
*/
static bool udc_req_std_iface_set_setting()
static bool udc_req_std_iface_set_setting(void)
{
uint8_t iface_num, setting_num;
@ -933,7 +933,7 @@ static bool udc_req_std_iface_set_setting()
*
* \return true if the request is supported
*/
static bool udc_reqstd()
static bool udc_reqstd(void)
{
if (Udd_setup_is_in()) {
// GET Standard Requests
@ -1027,7 +1027,7 @@ static bool udc_reqstd()
*
* \return true if the request is supported
*/
static bool udc_req_iface()
static bool udc_req_iface(void)
{
uint8_t iface_num;
udi_api_t UDC_DESC_STORAGE *udi_api;
@ -1062,7 +1062,7 @@ static bool udc_req_iface()
*
* \return true if the request is supported
*/
static bool udc_req_ep()
static bool udc_req_ep(void)
{
uint8_t iface_num;
udi_api_t UDC_DESC_STORAGE *udi_api;
@ -1101,7 +1101,7 @@ static bool udc_req_ep()
*
* \return true if the request is supported, else the request is stalled by UDD
*/
bool udc_process_setup()
bool udc_process_setup(void)
{
// By default no data (receive/send) and no callbacks registered
udd_g_ctrlreq.payload_size = 0;

View file

@ -172,18 +172,18 @@ extern "C" {
}
\endcode
*/
static inline bool udc_include_vbus_monitoring()
static inline bool udc_include_vbus_monitoring(void)
{
return udd_include_vbus_monitoring();
}
/*! \brief Start the USB Device stack
*/
void udc_start();
void udc_start(void);
/*! \brief Stop the USB Device stack
*/
void udc_stop();
void udc_stop(void);
/**
* \brief Attach device to the bus when possible
@ -192,7 +192,7 @@ void udc_stop();
* then it will attach device when an acceptable Vbus
* level from the host is detected.
*/
static inline void udc_attach()
static inline void udc_attach(void)
{
udd_attach();
}
@ -203,7 +203,7 @@ static inline void udc_attach()
*
* The driver must remove pull-up on USB line D- or D+.
*/
static inline void udc_detach()
static inline void udc_detach(void)
{
udd_detach();
}
@ -212,7 +212,7 @@ static inline void udc_detach()
/*! \brief The USB driver sends a resume signal called \e "Upstream Resume"
* This is authorized only when the remote wakeup feature is enabled by host.
*/
static inline void udc_remotewakeup()
static inline void udc_remotewakeup(void)
{
udd_send_remotewakeup();
}
@ -223,7 +223,7 @@ static inline void udc_remotewakeup()
*
* \return pointer on the current interface descriptor.
*/
usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc();
usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc(void);
//@}
@ -334,7 +334,7 @@ usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc();
*
* Add to application C-file:
* \code
void usb_init()
void usb_init(void)
{
udc_start();
}
@ -551,23 +551,23 @@ usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc();
#define USB_DEVICE_ATTR \
(USB_CONFIG_ATTR_REMOTE_WAKEUP | USB_CONFIG_ATTR_..._POWERED)
#define UDC_REMOTEWAKEUP_ENABLE() my_callback_remotewakeup_enable()
extern void my_callback_remotewakeup_enable();
extern void my_callback_remotewakeup_enable(void);
#define UDC_REMOTEWAKEUP_DISABLE() my_callback_remotewakeup_disable()
extern void my_callback_remotewakeup_disable();
extern void my_callback_remotewakeup_disable(void);
\endcode
*
* Add to application C-file:
* \code
void my_callback_remotewakeup_enable()
void my_callback_remotewakeup_enable(void)
{
// Enable application wakeup events (e.g. enable GPIO interrupt)
}
void my_callback_remotewakeup_disable()
void my_callback_remotewakeup_disable(void)
{
// Disable application wakeup events (e.g. disable GPIO interrupt)
}
void my_interrupt_event()
void my_interrupt_event(void)
{
udc_remotewakeup();
}
@ -580,10 +580,10 @@ usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc();
#define USB_DEVICE_ATTR (USB_CONFIG_ATTR_REMOTE_WAKEUP | USB_CONFIG_ATTR_..._POWERED) \endcode
* - \code // Define callback called when the host enables the remotewakeup feature
#define UDC_REMOTEWAKEUP_ENABLE() my_callback_remotewakeup_enable()
extern void my_callback_remotewakeup_enable(); \endcode
extern void my_callback_remotewakeup_enable(void); \endcode
* - \code // Define callback called when the host disables the remotewakeup feature
#define UDC_REMOTEWAKEUP_DISABLE() my_callback_remotewakeup_disable()
extern void my_callback_remotewakeup_disable(); \endcode
extern void my_callback_remotewakeup_disable(void); \endcode
* -# Send a remote wakeup (USB upstream):
* - \code udc_remotewakeup(); \endcode
*/
@ -605,18 +605,18 @@ usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc();
* \code
#define USB_DEVICE_ATTR (USB_CONFIG_ATTR_BUS_POWERED)
#define UDC_SUSPEND_EVENT() user_callback_suspend_action()
extern void user_callback_suspend_action()
extern void user_callback_suspend_action(void)
#define UDC_RESUME_EVENT() user_callback_resume_action()
extern void user_callback_resume_action()
extern void user_callback_resume_action(void)
\endcode
*
* Add to application C-file:
* \code
void user_callback_suspend_action()
void user_callback_suspend_action(void)
{
// Disable hardware component to reduce power consumption
}
void user_callback_resume_action()
void user_callback_resume_action(void)
{
// Re-enable hardware component
}
@ -628,12 +628,12 @@ usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc();
#define USB_DEVICE_ATTR (USB_CONFIG_ATTR_BUS_POWERED) \endcode
* - \code // Define callback called when the host suspend the USB line
#define UDC_SUSPEND_EVENT() user_callback_suspend_action()
extern void user_callback_suspend_action(); \endcode
extern void user_callback_suspend_action(void); \endcode
* - \code // Define callback called when the host or device resume the USB line
#define UDC_RESUME_EVENT() user_callback_resume_action()
extern void user_callback_resume_action(); \endcode
extern void user_callback_resume_action(void); \endcode
* -# Reduce power consumption in suspend mode (max. 2.5mA on Vbus):
* - \code void user_callback_suspend_action()
* - \code void user_callback_suspend_action(void)
{
turn_off_components();
} \endcode
@ -664,7 +664,7 @@ usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc();
* \code
uint8_t serial_number[USB_DEVICE_GET_SERIAL_NAME_LENGTH];
void init_build_usb_serial_number()
void init_build_usb_serial_number(void)
{
serial_number[0] = 'A';
serial_number[1] = 'B';
@ -683,7 +683,7 @@ usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc();
* - \code
uint8_t serial_number[USB_DEVICE_GET_SERIAL_NAME_LENGTH];
void init_build_usb_serial_number()
void init_build_usb_serial_number(void)
{
serial_number[0] = 'A';
serial_number[1] = 'B';

View file

@ -94,11 +94,11 @@ typedef struct {
uint16_t payload_size;
//! Callback called after reception of ZLP from setup request
void (*callback)();
void (*callback)(void);
//! Callback called when the buffer given (.payload) is full or empty.
//! This one return false to abort data transfer, or true with a new buffer in .payload.
bool (*over_under_run)();
bool (*over_under_run)(void);
} udd_ctrl_request_t;
extern udd_ctrl_request_t udd_g_ctrlreq;
@ -123,7 +123,7 @@ extern udd_ctrl_request_t udd_g_ctrlreq;
* Registered by routine udd_ep_wait_stall_clear()
* Callback called when endpoint stall is cleared.
*/
typedef void (*udd_callback_halt_cleared_t)();
typedef void (*udd_callback_halt_cleared_t)(void);
/**
* \brief End of transfer callback function type.
@ -142,17 +142,17 @@ typedef void (*udd_callback_trans_t) (udd_ep_status_t status,
*
* \return true, if the VBUS monitoring is possible.
*/
bool udd_include_vbus_monitoring();
bool udd_include_vbus_monitoring(void);
/**
* \brief Enables the USB Device mode
*/
void udd_enable();
void udd_enable(void);
/**
* \brief Disables the USB Device mode
*/
void udd_disable();
void udd_disable(void);
/**
* \brief Attach device to the bus when possible
@ -161,14 +161,14 @@ void udd_disable();
* then it will attach device when an acceptable Vbus
* level from the host is detected.
*/
void udd_attach();
void udd_attach(void);
/**
* \brief Detaches the device from the bus
*
* The driver must remove pull-up on USB line D- or D+.
*/
void udd_detach();
void udd_detach(void);
/**
* \brief Test whether the USB Device Controller is running at high
@ -176,7 +176,7 @@ void udd_detach();
*
* \return \c true if the Device is running at high speed mode, otherwise \c false.
*/
bool udd_is_high_speed();
bool udd_is_high_speed(void);
/**
* \brief Changes the USB address of device
@ -190,25 +190,25 @@ void udd_set_address(uint8_t address);
*
* \return USB address
*/
uint8_t udd_getaddress();
uint8_t udd_getaddress(void);
/**
* \brief Returns the current start of frame number
*
* \return current start of frame number.
*/
uint16_t udd_get_frame_number();
uint16_t udd_get_frame_number(void);
/**
* \brief Returns the current micro start of frame number
*
* \return current micro start of frame number required in high speed mode.
*/
uint16_t udd_get_micro_frame_number();
uint16_t udd_get_micro_frame_number(void);
/*! \brief The USB driver sends a resume signal called Upstream Resume
*/
void udd_send_remotewakeup();
void udd_send_remotewakeup(void);
/**
* \brief Load setup payload
@ -346,10 +346,10 @@ void udd_ep_abort(udd_ep_id_t ep);
* The following functions allow the device to jump to a specific test mode required in high speed mode.
*/
//@{
void udd_test_mode_j();
void udd_test_mode_k();
void udd_test_mode_se0_nak();
void udd_test_mode_packet();
void udd_test_mode_j(void);
void udd_test_mode_k(void);
void udd_test_mode_se0_nak(void);
void udd_test_mode_packet(void);
//@}
@ -370,21 +370,21 @@ void udd_test_mode_packet();
*
* \return \c 1 if the request is accepted, otherwise \c 0.
*/
extern bool udc_process_setup();
extern bool udc_process_setup(void);
/**
* \brief Reset the UDC
*
* The UDC must reset all configuration.
*/
extern void udc_reset();
extern void udc_reset(void);
/**
* \brief To signal that a SOF is occurred
*
* The UDC must send the signal to all UDIs enabled
*/
extern void udc_sof_notify();
extern void udc_sof_notify(void);
//@}

View file

@ -82,7 +82,7 @@ typedef struct {
*
* \return \c 1 if function was successfully done, otherwise \c 0.
*/
bool (*enable)();
bool (*enable)(void);
/**
* \brief Disable the interface.
@ -95,7 +95,7 @@ typedef struct {
* - the device is detached from the host (i.e. Vbus is no
* longer present)
*/
void (*disable)();
void (*disable)(void);
/**
* \brief Handle a control request directed at an interface.
@ -108,7 +108,7 @@ typedef struct {
*
* \return \c 1 if this interface supports the SETUP request, otherwise \c 0.
*/
bool (*setup)();
bool (*setup)(void);
/**
* \brief Returns the current setting of the selected interface.
@ -117,12 +117,12 @@ typedef struct {
*
* \return alternate setting of selected interface
*/
uint8_t (*getsetting)();
uint8_t (*getsetting)(void);
/**
* \brief To signal that a SOF is occurred
*/
void (*sof_notify)();
void (*sof_notify)(void);
} udi_api_t;
//@}

View file

@ -84,14 +84,14 @@
*
* @{
*/
bool udi_cdc_comm_enable();
void udi_cdc_comm_disable();
bool udi_cdc_comm_setup();
bool udi_cdc_data_enable();
void udi_cdc_data_disable();
bool udi_cdc_data_setup();
uint8_t udi_cdc_getsetting();
void udi_cdc_data_sof_notify();
bool udi_cdc_comm_enable(void);
void udi_cdc_comm_disable(void);
bool udi_cdc_comm_setup(void);
bool udi_cdc_data_enable(void);
void udi_cdc_data_disable(void);
bool udi_cdc_data_setup(void);
uint8_t udi_cdc_getsetting(void);
void udi_cdc_data_sof_notify(void);
UDC_DESC_STORAGE udi_api_t udi_api_cdc_comm = {
.enable = udi_cdc_comm_enable,
.disable = udi_cdc_comm_disable,
@ -130,14 +130,14 @@ UDC_DESC_STORAGE udi_api_t udi_api_cdc_data = {
*
* \return port number
*/
static uint8_t udi_cdc_setup_to_port();
static uint8_t udi_cdc_setup_to_port(void);
/**
* \brief Sends line coding to application
*
* Called after SETUP request when line coding data is received.
*/
static void udi_cdc_line_coding_received();
static void udi_cdc_line_coding_received(void);
/**
* \brief Records new state
@ -267,7 +267,7 @@ static volatile bool udi_cdc_tx_both_buf_to_send[UDI_CDC_PORT_NB];
//@}
bool udi_cdc_comm_enable()
bool udi_cdc_comm_enable(void)
{
uint8_t port;
uint8_t iface_comm_num;
@ -321,7 +321,7 @@ bool udi_cdc_comm_enable()
return true;
}
bool udi_cdc_data_enable()
bool udi_cdc_data_enable(void)
{
uint8_t port;
@ -360,13 +360,13 @@ bool udi_cdc_data_enable()
return true;
}
void udi_cdc_comm_disable()
void udi_cdc_comm_disable(void)
{
Assert(udi_cdc_nb_comm_enabled != 0);
udi_cdc_nb_comm_enabled--;
}
void udi_cdc_data_disable()
void udi_cdc_data_disable(void)
{
uint8_t port;
@ -377,7 +377,7 @@ void udi_cdc_data_disable()
udi_cdc_data_running = false;
}
bool udi_cdc_comm_setup()
bool udi_cdc_comm_setup(void)
{
uint8_t port = udi_cdc_setup_to_port();
@ -433,17 +433,17 @@ bool udi_cdc_comm_setup()
return false; // request Not supported
}
bool udi_cdc_data_setup()
bool udi_cdc_data_setup(void)
{
return false; // request Not supported
}
uint8_t udi_cdc_getsetting()
uint8_t udi_cdc_getsetting(void)
{
return 0; // CDC don't have multiple alternate setting
}
void udi_cdc_data_sof_notify()
void udi_cdc_data_sof_notify(void)
{
static uint8_t port_notify = 0;
@ -461,7 +461,7 @@ void udi_cdc_data_sof_notify()
// ------------------------
//------- Internal routines to control serial line
static uint8_t udi_cdc_setup_to_port()
static uint8_t udi_cdc_setup_to_port(void)
{
uint8_t port;
@ -479,7 +479,7 @@ static uint8_t udi_cdc_setup_to_port()
return port;
}
static void udi_cdc_line_coding_received()
static void udi_cdc_line_coding_received(void)
{
uint8_t port = udi_cdc_setup_to_port();
UNUSED(port);
@ -797,17 +797,17 @@ void udi_cdc_ctrl_signal_dsr(bool b_set)
udi_cdc_ctrl_state_change(0, b_set, CDC_SERIAL_STATE_DSR);
}
void udi_cdc_signal_framing_error()
void udi_cdc_signal_framing_error(void)
{
udi_cdc_ctrl_state_change(0, true, CDC_SERIAL_STATE_FRAMING);
}
void udi_cdc_signal_parity_error()
void udi_cdc_signal_parity_error(void)
{
udi_cdc_ctrl_state_change(0, true, CDC_SERIAL_STATE_PARITY);
}
void udi_cdc_signal_overrun()
void udi_cdc_signal_overrun(void)
{
udi_cdc_ctrl_state_change(0, true, CDC_SERIAL_STATE_OVERRUN);
}
@ -853,7 +853,7 @@ iram_size_t udi_cdc_multi_get_nb_received_data(uint8_t port)
return nb_received;
}
iram_size_t udi_cdc_get_nb_received_data()
iram_size_t udi_cdc_get_nb_received_data(void)
{
return udi_cdc_multi_get_nb_received_data(0);
}
@ -863,7 +863,7 @@ bool udi_cdc_multi_is_rx_ready(uint8_t port)
return (udi_cdc_multi_get_nb_received_data(port) > 0);
}
bool udi_cdc_is_rx_ready()
bool udi_cdc_is_rx_ready(void)
{
return udi_cdc_multi_is_rx_ready(0);
}
@ -912,7 +912,7 @@ udi_cdc_getc_process_one_byte:
return rx_data;
}
int udi_cdc_getc()
int udi_cdc_getc(void)
{
return udi_cdc_multi_getc(0);
}
@ -1041,7 +1041,7 @@ iram_size_t __attribute__((optimize("O0"))) udi_cdc_multi_get_free_tx_buffer(uin
return retval;
}
iram_size_t udi_cdc_get_free_tx_buffer()
iram_size_t udi_cdc_get_free_tx_buffer(void)
{
return udi_cdc_multi_get_free_tx_buffer(0);
}
@ -1051,7 +1051,7 @@ bool udi_cdc_multi_is_tx_ready(uint8_t port)
return (udi_cdc_multi_get_free_tx_buffer(port) != 0);
}
bool udi_cdc_is_tx_ready()
bool udi_cdc_is_tx_ready(void)
{
return udi_cdc_multi_is_tx_ready(0);
}

View file

@ -366,38 +366,38 @@ void udi_cdc_ctrl_signal_dsr(bool b_set);
/**
* \brief Notify a framing error
*/
void udi_cdc_signal_framing_error();
void udi_cdc_signal_framing_error(void);
/**
* \brief Notify a parity error
*/
void udi_cdc_signal_parity_error();
void udi_cdc_signal_parity_error(void);
/**
* \brief Notify a overrun
*/
void udi_cdc_signal_overrun();
void udi_cdc_signal_overrun(void);
/**
* \brief Gets the number of byte received
*
* \return the number of data available
*/
iram_size_t udi_cdc_get_nb_received_data();
iram_size_t udi_cdc_get_nb_received_data(void);
/**
* \brief This function checks if a character has been received on the CDC line
*
* \return \c 1 if a byte is ready to be read.
*/
bool udi_cdc_is_rx_ready();
bool udi_cdc_is_rx_ready(void);
/**
* \brief Waits and gets a value on CDC line
*
* \return value read on CDC line
*/
int udi_cdc_getc();
int udi_cdc_getc(void);
/**
* \brief Reads a RAM buffer on CDC line
@ -425,7 +425,7 @@ iram_size_t udi_cdc_read_no_polling(void* buf, iram_size_t size);
*
* \return the number of free byte in TX buffer
*/
iram_size_t udi_cdc_get_free_tx_buffer();
iram_size_t udi_cdc_get_free_tx_buffer(void);
/**
* \brief This function checks if a new character sent is possible
@ -433,7 +433,7 @@ iram_size_t udi_cdc_get_free_tx_buffer();
*
* \return \c 1 if a new character can be sent
*/
bool udi_cdc_is_tx_ready();
bool udi_cdc_is_tx_ready(void);
/**
* \brief Puts a byte on CDC line
@ -611,9 +611,9 @@ iram_size_t udi_cdc_multi_write_buf(uint8_t port, const void* buf, iram_size_t s
* Content of conf_usb.h:
* \code
#define UDI_CDC_ENABLE_EXT(port) my_callback_cdc_enable()
extern bool my_callback_cdc_enable();
extern bool my_callback_cdc_enable(void);
#define UDI_CDC_DISABLE_EXT(port) my_callback_cdc_disable()
extern void my_callback_cdc_disable();
extern void my_callback_cdc_disable(void);
#define UDI_CDC_LOW_RATE
#define UDI_CDC_DEFAULT_RATE 115200
@ -627,17 +627,17 @@ iram_size_t udi_cdc_multi_write_buf(uint8_t port, const void* buf, iram_size_t s
* Add to application C-file:
* \code
static bool my_flag_autorize_cdc_transfert = false;
bool my_callback_cdc_enable()
bool my_callback_cdc_enable(void)
{
my_flag_autorize_cdc_transfert = true;
return true;
}
void my_callback_cdc_disable()
void my_callback_cdc_disable(void)
{
my_flag_autorize_cdc_transfert = false;
}
void task()
void task(void)
{
if (my_flag_autorize_cdc_transfert) {
udi_cdc_putc('A');
@ -652,14 +652,14 @@ iram_size_t udi_cdc_multi_write_buf(uint8_t port, const void* buf, iram_size_t s
* - \code #define USB_DEVICE_SERIAL_NAME "12...EF" // Disk SN for CDC \endcode
* \note The USB serial number is mandatory when a CDC interface is used.
* - \code #define UDI_CDC_ENABLE_EXT(port) my_callback_cdc_enable()
extern bool my_callback_cdc_enable(); \endcode
extern bool my_callback_cdc_enable(void); \endcode
* \note After the device enumeration (detecting and identifying USB devices),
* the USB host starts the device configuration. When the USB CDC interface
* from the device is accepted by the host, the USB host enables this interface and the
* UDI_CDC_ENABLE_EXT() callback function is called and return true.
* Thus, when this event is received, the data transfer on CDC interface are authorized.
* - \code #define UDI_CDC_DISABLE_EXT(port) my_callback_cdc_disable()
extern void my_callback_cdc_disable(); \endcode
extern void my_callback_cdc_disable(void); \endcode
* \note When the USB device is unplugged or is reset by the USB host, the USB
* interface is disabled and the UDI_CDC_DISABLE_EXT() callback function
* is called. Thus, the data transfer must be stopped on CDC interface.
@ -673,7 +673,7 @@ iram_size_t udi_cdc_multi_write_buf(uint8_t port, const void* buf, iram_size_t s
* \note Default configuration of communication port at startup.
* -# Send or wait data on CDC line:
* - \code // Waits and gets a value on CDC line
int udi_cdc_getc();
int udi_cdc_getc(void);
// Reads a RAM buffer on CDC line
iram_size_t udi_cdc_read_buf(int* buf, iram_size_t size);
// Puts a byte on CDC line

View file

@ -71,10 +71,10 @@
*
* @{
*/
bool udi_msc_enable();
void udi_msc_disable();
bool udi_msc_setup();
uint8_t udi_msc_getsetting();
bool udi_msc_enable(void);
void udi_msc_disable(void);
bool udi_msc_setup(void);
uint8_t udi_msc_getsetting(void);
//! Global structure which contains standard UDI API for UDC
UDC_DESC_STORAGE udi_api_t udi_api_msc = {
@ -151,12 +151,12 @@ volatile bool udi_msc_b_reset_trans = true;
/**
* \brief Stall CBW request
*/
static void udi_msc_cbw_invalid();
static void udi_msc_cbw_invalid(void);
/**
* \brief Stall CSW request
*/
static void udi_msc_csw_invalid();
static void udi_msc_csw_invalid(void);
/**
* \brief Links a callback and buffer on endpoint OUT reception
@ -165,7 +165,7 @@ static void udi_msc_csw_invalid();
* - enable interface
* - at the end of previous command after sending the CSW
*/
static void udi_msc_cbw_wait();
static void udi_msc_cbw_wait(void);
/**
* \brief Callback called after CBW reception
@ -228,7 +228,7 @@ static void udi_msc_data_sent(udd_ep_status_t status, iram_size_t nb_sent,
*
* Called at the end of SCSI command
*/
static void udi_msc_csw_process();
static void udi_msc_csw_process(void);
/**
* \brief Sends CSW
@ -236,7 +236,7 @@ static void udi_msc_csw_process();
* Called by #udi_msc_csw_process()
* or UDD callback when endpoint halt is cleared
*/
void udi_msc_csw_send();
void udi_msc_csw_send(void);
/**
* \brief Callback called after CSW sent
@ -259,7 +259,7 @@ static void udi_msc_csw_sent(udd_ep_status_t status, iram_size_t nb_sent,
/**
* \brief Reinitialize sense data.
*/
static void udi_msc_clear_sense();
static void udi_msc_clear_sense(void);
/**
* \brief Update sense data with new value to signal a fail
@ -274,37 +274,37 @@ static void udi_msc_sense_fail(uint8_t sense_key, uint16_t add_sense,
/**
* \brief Update sense data with new value to signal success
*/
static void udi_msc_sense_pass();
static void udi_msc_sense_pass(void);
/**
* \brief Update sense data to signal that memory is not present
*/
static void udi_msc_sense_fail_not_present();
static void udi_msc_sense_fail_not_present(void);
/**
* \brief Update sense data to signal that memory is busy
*/
static void udi_msc_sense_fail_busy_or_change();
static void udi_msc_sense_fail_busy_or_change(void);
/**
* \brief Update sense data to signal a hardware error on memory
*/
static void udi_msc_sense_fail_hardware();
static void udi_msc_sense_fail_hardware(void);
/**
* \brief Update sense data to signal that memory is protected
*/
static void udi_msc_sense_fail_protected();
static void udi_msc_sense_fail_protected(void);
/**
* \brief Update sense data to signal that CDB fields are not valid
*/
static void udi_msc_sense_fail_cdb_invalid();
static void udi_msc_sense_fail_cdb_invalid(void);
/**
* \brief Update sense data to signal that command is not supported
*/
static void udi_msc_sense_command_invalid();
static void udi_msc_sense_command_invalid(void);
//@}
@ -317,31 +317,31 @@ static void udi_msc_sense_command_invalid();
* \brief Process SPC Request Sense command
* Returns error information about last command
*/
static void udi_msc_spc_requestsense();
static void udi_msc_spc_requestsense(void);
/**
* \brief Process SPC Inquiry command
* Returns information (name,version) about disk
*/
static void udi_msc_spc_inquiry();
static void udi_msc_spc_inquiry(void);
/**
* \brief Checks state of disk
*
* \retval true if disk is ready, otherwise false and updates sense data
*/
static bool udi_msc_spc_testunitready_global();
static bool udi_msc_spc_testunitready_global(void);
/**
* \brief Process test unit ready command
* Returns state of logical unit
*/
static void udi_msc_spc_testunitready();
static void udi_msc_spc_testunitready(void);
/**
* \brief Process prevent allow medium removal command
*/
static void udi_msc_spc_prevent_allow_medium_removal();
static void udi_msc_spc_prevent_allow_medium_removal(void);
/**
* \brief Process mode sense command
@ -354,12 +354,12 @@ static void udi_msc_spc_mode_sense(bool b_sense10);
/**
* \brief Process start stop command
*/
static void udi_msc_sbc_start_stop();
static void udi_msc_sbc_start_stop(void);
/**
* \brief Process read capacity command
*/
static void udi_msc_sbc_read_capacity();
static void udi_msc_sbc_read_capacity(void);
/**
* \brief Process read10 or write10 command
@ -373,7 +373,7 @@ static void udi_msc_sbc_trans(bool b_read);
//@}
bool udi_msc_enable()
bool udi_msc_enable(void)
{
uint8_t lun;
udi_msc_b_trans_req = false;
@ -398,7 +398,7 @@ bool udi_msc_enable()
}
void udi_msc_disable()
void udi_msc_disable(void)
{
udi_msc_b_trans_req = false;
udi_msc_b_ack_trans = true;
@ -407,7 +407,7 @@ void udi_msc_disable()
}
bool udi_msc_setup()
bool udi_msc_setup(void)
{
if (Udd_setup_is_in()) {
// Requests Interface GET
@ -451,7 +451,7 @@ bool udi_msc_setup()
return false; // Not supported request
}
uint8_t udi_msc_getsetting()
uint8_t udi_msc_getsetting(void)
{
return 0; // MSC don't have multiple alternate setting
}
@ -460,7 +460,7 @@ uint8_t udi_msc_getsetting()
// ------------------------
//------- Routines to process CBW packet
static void udi_msc_cbw_invalid()
static void udi_msc_cbw_invalid(void)
{
if (!udi_msc_b_cbw_invalid)
return; // Don't re-stall endpoint if error reseted by setup
@ -469,7 +469,7 @@ static void udi_msc_cbw_invalid()
udd_ep_wait_stall_clear(UDI_MSC_EP_OUT, udi_msc_cbw_invalid);
}
static void udi_msc_csw_invalid()
static void udi_msc_csw_invalid(void)
{
if (!udi_msc_b_cbw_invalid)
return; // Don't re-stall endpoint if error reseted by setup
@ -478,7 +478,7 @@ static void udi_msc_csw_invalid()
udd_ep_wait_stall_clear(UDI_MSC_EP_IN, udi_msc_csw_invalid);
}
static void udi_msc_cbw_wait()
static void udi_msc_cbw_wait(void)
{
// Register buffer and callback on OUT endpoint
if (!udd_ep_run(UDI_MSC_EP_OUT, true,
@ -648,7 +648,7 @@ static void udi_msc_data_sent(udd_ep_status_t status, iram_size_t nb_sent,
// ------------------------
//------- Routines to process CSW packet
static void udi_msc_csw_process()
static void udi_msc_csw_process(void)
{
if (0 != udi_msc_csw.dCSWDataResidue) {
// Residue not NULL
@ -665,7 +665,7 @@ static void udi_msc_csw_process()
}
void udi_msc_csw_send()
void udi_msc_csw_send(void)
{
// Sends CSW on IN endpoint
if (!udd_ep_run(UDI_MSC_EP_IN, false,
@ -694,7 +694,7 @@ static void udi_msc_csw_sent(udd_ep_status_t status, iram_size_t nb_sent,
// ------------------------
//------- Routines manage sense data
static void udi_msc_clear_sense()
static void udi_msc_clear_sense(void)
{
memset((uint8_t*)&udi_msc_sense, 0, sizeof(struct scsi_request_sense_data));
udi_msc_sense.valid_reponse_code = SCSI_SENSE_VALID | SCSI_SENSE_CURRENT;
@ -715,42 +715,42 @@ static void udi_msc_sense_fail(uint8_t sense_key, uint16_t add_sense,
udi_msc_sense.AddSnsCodeQlfr = add_sense;
}
static void udi_msc_sense_pass()
static void udi_msc_sense_pass(void)
{
udi_msc_clear_sense();
udi_msc_csw.bCSWStatus = USB_CSW_STATUS_PASS;
}
static void udi_msc_sense_fail_not_present()
static void udi_msc_sense_fail_not_present(void)
{
udi_msc_sense_fail(SCSI_SK_NOT_READY, SCSI_ASC_MEDIUM_NOT_PRESENT, 0);
}
static void udi_msc_sense_fail_busy_or_change()
static void udi_msc_sense_fail_busy_or_change(void)
{
udi_msc_sense_fail(SCSI_SK_UNIT_ATTENTION,
SCSI_ASC_NOT_READY_TO_READY_CHANGE, 0);
}
static void udi_msc_sense_fail_hardware()
static void udi_msc_sense_fail_hardware(void)
{
udi_msc_sense_fail(SCSI_SK_HARDWARE_ERROR,
SCSI_ASC_NO_ADDITIONAL_SENSE_INFO, 0);
}
static void udi_msc_sense_fail_protected()
static void udi_msc_sense_fail_protected(void)
{
udi_msc_sense_fail(SCSI_SK_DATA_PROTECT, SCSI_ASC_WRITE_PROTECTED, 0);
}
static void udi_msc_sense_fail_cdb_invalid()
static void udi_msc_sense_fail_cdb_invalid(void)
{
udi_msc_sense_fail(SCSI_SK_ILLEGAL_REQUEST,
SCSI_ASC_INVALID_FIELD_IN_CDB, 0);
}
static void udi_msc_sense_command_invalid()
static void udi_msc_sense_command_invalid(void)
{
udi_msc_sense_fail(SCSI_SK_ILLEGAL_REQUEST,
SCSI_ASC_INVALID_COMMAND_OPERATION_CODE, 0);
@ -760,7 +760,7 @@ static void udi_msc_sense_command_invalid()
// ------------------------
//------- Routines manage SCSI Commands
static void udi_msc_spc_requestsense()
static void udi_msc_spc_requestsense(void)
{
uint8_t length = udi_msc_cbw.CDB[4];
@ -775,7 +775,7 @@ static void udi_msc_spc_requestsense()
}
static void udi_msc_spc_inquiry()
static void udi_msc_spc_inquiry(void)
{
uint8_t length, i;
UDC_DATA(4)
@ -836,7 +836,7 @@ static void udi_msc_spc_inquiry()
}
static bool udi_msc_spc_testunitready_global()
static bool udi_msc_spc_testunitready_global(void)
{
switch (mem_test_unit_ready(udi_msc_cbw.bCBWLUN)) {
case CTRL_GOOD:
@ -856,7 +856,7 @@ static bool udi_msc_spc_testunitready_global()
}
static void udi_msc_spc_testunitready()
static void udi_msc_spc_testunitready(void)
{
if (udi_msc_spc_testunitready_global()) {
// LUN ready, then update sense data with status pass
@ -944,7 +944,7 @@ static void udi_msc_spc_mode_sense(bool b_sense10)
}
static void udi_msc_spc_prevent_allow_medium_removal()
static void udi_msc_spc_prevent_allow_medium_removal(void)
{
uint8_t prevent = udi_msc_cbw.CDB[4];
if (0 == prevent) {
@ -956,7 +956,7 @@ static void udi_msc_spc_prevent_allow_medium_removal()
}
static void udi_msc_sbc_start_stop()
static void udi_msc_sbc_start_stop(void)
{
bool start = 0x1 & udi_msc_cbw.CDB[4];
bool loej = 0x2 & udi_msc_cbw.CDB[4];
@ -968,7 +968,7 @@ static void udi_msc_sbc_start_stop()
}
static void udi_msc_sbc_read_capacity()
static void udi_msc_sbc_read_capacity(void)
{
UDC_BSS(4) static struct sbc_read_capacity10_data udi_msc_capacity;
@ -1039,7 +1039,7 @@ static void udi_msc_sbc_trans(bool b_read)
}
bool udi_msc_process_trans()
bool udi_msc_process_trans(void)
{
Ctrl_status status;

View file

@ -148,7 +148,7 @@ typedef struct {
*
* Routine called by the main loop
*/
bool udi_msc_process_trans();
bool udi_msc_process_trans(void);
/**
* \brief Transfers data to/from USB MSC endpoints
@ -206,26 +206,26 @@ bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size,
#define UDI_MSC_GLOBAL_PRODUCT_VERSION \
'1', '.', '0', '0'
#define UDI_MSC_ENABLE_EXT() my_callback_msc_enable()
extern bool my_callback_msc_enable();
extern bool my_callback_msc_enable(void);
#define UDI_MSC_DISABLE_EXT() my_callback_msc_disable()
extern void my_callback_msc_disable();
extern void my_callback_msc_disable(void);
#include "udi_msc_conf.h" // At the end of conf_usb.h file
\endcode
*
* Add to application C-file:
* \code
static bool my_flag_autorize_msc_transfert = false;
bool my_callback_msc_enable()
bool my_callback_msc_enable(void)
{
my_flag_autorize_msc_transfert = true;
return true;
}
void my_callback_msc_disable()
void my_callback_msc_disable(void)
{
my_flag_autorize_msc_transfert = false;
}
void task()
void task(void)
{
udi_msc_process_trans();
}
@ -244,7 +244,7 @@ bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size,
* \note The USB MSC interface requires a vendor ID (8 ASCII characters)
* and a product version (4 ASCII characters).
* - \code #define UDI_MSC_ENABLE_EXT() my_callback_msc_enable()
extern bool my_callback_msc_enable(); \endcode
extern bool my_callback_msc_enable(void); \endcode
* \note After the device enumeration (detecting and identifying USB devices),
* the USB host starts the device configuration. When the USB MSC interface
* from the device is accepted by the host, the USB host enables this interface and the
@ -252,7 +252,7 @@ bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size,
* Thus, when this event is received, the tasks which call
* udi_msc_process_trans() must be enabled.
* - \code #define UDI_MSC_DISABLE_EXT() my_callback_msc_disable()
extern void my_callback_msc_disable(); \endcode
extern void my_callback_msc_disable(void); \endcode
* \note When the USB device is unplugged or is reset by the USB host, the USB
* interface is disabled and the UDI_MSC_DISABLE_EXT() callback function
* is called. Thus, it is recommended to disable the task which is called udi_msc_process_trans().
@ -260,14 +260,14 @@ bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size,
* which provides the memories interfaces. However, the memory data transfers
* must be done outside USB interrupt routine. This is done in the MSC process
* ("udi_msc_process_trans()") called by main loop:
* - \code * void task() {
* - \code * void task(void) {
udi_msc_process_trans();
} \endcode
* -# The MSC speed depends on task periodicity. To get the best speed
* the notification callback "UDI_MSC_NOTIFY_TRANS_EXT" can be used to wakeup
* this task (Example, through a mutex):
* - \code #define UDI_MSC_NOTIFY_TRANS_EXT() msc_notify_trans()
void msc_notify_trans() {
void msc_notify_trans(void) {
wakeup_my_task();
} \endcode
*

View file

@ -357,41 +357,41 @@ static uint16_t udd_ctrl_payload_buf_cnt;
*
* Called after a USB line reset or when UDD is enabled
*/
static void udd_reset_ep_ctrl();
static void udd_reset_ep_ctrl(void);
/**
* \brief Reset control endpoint management
*
* Called after a USB line reset or at the end of SETUP request (after ZLP)
*/
static void udd_ctrl_init();
static void udd_ctrl_init(void);
//! \brief Managed reception of SETUP packet on control endpoint
static void udd_ctrl_setup_received();
static void udd_ctrl_setup_received(void);
//! \brief Managed reception of IN packet on control endpoint
static void udd_ctrl_in_sent();
static void udd_ctrl_in_sent(void);
//! \brief Managed reception of OUT packet on control endpoint
static void udd_ctrl_out_received();
static void udd_ctrl_out_received(void);
//! \brief Managed underflow event of IN packet on control endpoint
static void udd_ctrl_underflow();
static void udd_ctrl_underflow(void);
//! \brief Managed overflow event of OUT packet on control endpoint
static void udd_ctrl_overflow();
static void udd_ctrl_overflow(void);
//! \brief Managed stall event of IN/OUT packet on control endpoint
static void udd_ctrl_stall_data();
static void udd_ctrl_stall_data(void);
//! \brief Send a ZLP IN on control endpoint
static void udd_ctrl_send_zlp_in();
static void udd_ctrl_send_zlp_in(void);
//! \brief Send a ZLP OUT on control endpoint
static void udd_ctrl_send_zlp_out();
static void udd_ctrl_send_zlp_out(void);
//! \brief Call callback associated to setup request
static void udd_ctrl_endofrequest();
static void udd_ctrl_endofrequest(void);
/**
@ -401,7 +401,7 @@ static void udd_ctrl_endofrequest();
*
* \return \c 1 if an event about control endpoint is occured, otherwise \c 0.
*/
static bool udd_ctrl_interrupt();
static bool udd_ctrl_interrupt(void);
//@}
@ -448,10 +448,10 @@ typedef struct {
static udd_ep_job_t udd_ep_job[USB_DEVICE_MAX_EP];
//! \brief Reset all job table
static void udd_ep_job_table_reset();
static void udd_ep_job_table_reset(void);
//! \brief Abort all endpoint jobs on going
static void udd_ep_job_table_kill();
static void udd_ep_job_table_kill(void);
#ifdef UDD_EP_FIFO_SUPPORTED
/**
@ -500,7 +500,7 @@ static void udd_ep_finish_job(udd_ep_job_t * ptr_job, bool b_abort, uint8_t ep_n
*
* \return \c 1 if an event about bulk/interrupt/isochronous endpoints has occured, otherwise \c 0.
*/
static bool udd_ep_interrupt();
static bool udd_ep_interrupt(void);
#endif // (0!=USB_DEVICE_MAX_EP)
//@}
@ -524,8 +524,8 @@ static bool udd_ep_interrupt();
* See Technical reference $3.8.3 Masking interrupt requests in peripheral modules.
*/
#ifdef UHD_ENABLE
void udd_interrupt();
void udd_interrupt()
void udd_interrupt(void);
void udd_interrupt(void)
#else
ISR(UDD_USB_INT_FUN)
#endif
@ -643,13 +643,13 @@ udd_interrupt_sof_end:
}
bool udd_include_vbus_monitoring()
bool udd_include_vbus_monitoring(void)
{
return true;
}
void udd_enable()
void udd_enable(void)
{
irqflags_t flags;
@ -736,7 +736,7 @@ void udd_enable()
}
void udd_disable()
void udd_disable(void)
{
irqflags_t flags;
@ -777,7 +777,7 @@ void udd_disable()
}
void udd_attach()
void udd_attach(void)
{
irqflags_t flags;
flags = cpu_irq_save();
@ -818,7 +818,7 @@ void udd_attach()
}
void udd_detach()
void udd_detach(void)
{
otg_unfreeze_clock();
@ -829,7 +829,7 @@ void udd_detach()
}
bool udd_is_high_speed()
bool udd_is_high_speed(void)
{
#ifdef USB_DEVICE_HS_SUPPORT
return !Is_udd_full_speed_mode();
@ -847,23 +847,23 @@ void udd_set_address(uint8_t address)
}
uint8_t udd_getaddress()
uint8_t udd_getaddress(void)
{
return udd_get_configured_address();
}
uint16_t udd_get_frame_number()
uint16_t udd_get_frame_number(void)
{
return udd_frame_number();
}
uint16_t udd_get_micro_frame_number()
uint16_t udd_get_micro_frame_number(void)
{
return udd_micro_frame_number();
}
void udd_send_remotewakeup()
void udd_send_remotewakeup(void)
{
#ifndef UDD_NO_SLEEP_MGR
if (!udd_b_idle)
@ -1242,27 +1242,27 @@ bool udd_ep_wait_stall_clear(udd_ep_id_t ep,
#ifdef USB_DEVICE_HS_SUPPORT
void udd_test_mode_j()
void udd_test_mode_j(void)
{
udd_enable_hs_test_mode();
udd_enable_hs_test_mode_j();
}
void udd_test_mode_k()
void udd_test_mode_k(void)
{
udd_enable_hs_test_mode();
udd_enable_hs_test_mode_k();
}
void udd_test_mode_se0_nak()
void udd_test_mode_se0_nak(void)
{
udd_enable_hs_test_mode();
}
void udd_test_mode_packet()
void udd_test_mode_packet(void)
{
uint8_t i;
uint8_t *ptr_dest;
@ -1310,7 +1310,7 @@ void udd_test_mode_packet()
// ------------------------
//--- INTERNAL ROUTINES TO MANAGED THE CONTROL ENDPOINT
static void udd_reset_ep_ctrl()
static void udd_reset_ep_ctrl(void)
{
irqflags_t flags;
@ -1334,7 +1334,7 @@ static void udd_reset_ep_ctrl()
cpu_irq_restore(flags);
}
static void udd_ctrl_init()
static void udd_ctrl_init(void)
{
irqflags_t flags;
flags = cpu_irq_save();
@ -1357,7 +1357,7 @@ static void udd_ctrl_init()
}
static void udd_ctrl_setup_received()
static void udd_ctrl_setup_received(void)
{
irqflags_t flags;
uint8_t i;
@ -1419,7 +1419,7 @@ static void udd_ctrl_setup_received()
}
static void udd_ctrl_in_sent()
static void udd_ctrl_in_sent(void)
{
static bool b_shortpacket = false;
uint16_t nb_remain;
@ -1503,7 +1503,7 @@ static void udd_ctrl_in_sent()
}
static void udd_ctrl_out_received()
static void udd_ctrl_out_received(void)
{
irqflags_t flags;
uint8_t i;
@ -1594,7 +1594,7 @@ static void udd_ctrl_out_received()
}
static void udd_ctrl_underflow()
static void udd_ctrl_underflow(void)
{
if (Is_udd_out_received(0))
return; // Underflow ignored if OUT data is received
@ -1611,7 +1611,7 @@ static void udd_ctrl_underflow()
}
static void udd_ctrl_overflow()
static void udd_ctrl_overflow(void)
{
if (Is_udd_in_send(0))
return; // Overflow ignored if IN data is received
@ -1627,7 +1627,7 @@ static void udd_ctrl_overflow()
}
static void udd_ctrl_stall_data()
static void udd_ctrl_stall_data(void)
{
// Stall all packets on IN & OUT control endpoint
udd_ep_control_state = UDD_EPCTRL_STALL_REQ;
@ -1635,7 +1635,7 @@ static void udd_ctrl_stall_data()
}
static void udd_ctrl_send_zlp_in()
static void udd_ctrl_send_zlp_in(void)
{
irqflags_t flags;
@ -1653,7 +1653,7 @@ static void udd_ctrl_send_zlp_in()
}
static void udd_ctrl_send_zlp_out()
static void udd_ctrl_send_zlp_out(void)
{
irqflags_t flags;
@ -1669,7 +1669,7 @@ static void udd_ctrl_send_zlp_out()
}
static void udd_ctrl_endofrequest()
static void udd_ctrl_endofrequest(void)
{
// If a callback is registered then call it
if (udd_g_ctrlreq.callback) {
@ -1678,7 +1678,7 @@ static void udd_ctrl_endofrequest()
}
static bool udd_ctrl_interrupt()
static bool udd_ctrl_interrupt(void)
{
if (!Is_udd_endpoint_interrupt(0)) {
@ -1734,7 +1734,7 @@ static bool udd_ctrl_interrupt()
#if (0 != USB_DEVICE_MAX_EP)
static void udd_ep_job_table_reset()
static void udd_ep_job_table_reset(void)
{
uint8_t i;
for (i = 0; i < USB_DEVICE_MAX_EP; i++) {
@ -1744,7 +1744,7 @@ static void udd_ep_job_table_reset()
}
static void udd_ep_job_table_kill()
static void udd_ep_job_table_kill(void)
{
uint8_t i;
@ -1970,7 +1970,7 @@ static void udd_ep_out_received(udd_ep_id_t ep)
}
#endif // #ifdef UDD_EP_FIFO_SUPPORTED
static bool udd_ep_interrupt()
static bool udd_ep_interrupt(void)
{
udd_ep_id_t ep;
udd_ep_job_t *ptr_job;

View file

@ -66,13 +66,13 @@ extern "C" {
*
* \return \c true if the ID pin management has been started, otherwise \c false.
*/
bool otg_dual_enable();
bool otg_dual_enable(void);
/**
* \brief Uninitialize the dual role
* This function is implemented in uotghs_host.c file.
*/
void otg_dual_disable();
void otg_dual_disable(void);
//! @name UOTGHS OTG ID pin management

View file

@ -56,7 +56,7 @@
static volatile bool main_b_cdc_enable = false;
static volatile bool main_b_dtr_active = false;
void usb_task_idle() {
void usb_task_idle(void) {
#if ENABLED(SDSUPPORT)
// Attend SD card access from the USB MSD -- Prioritize access to improve speed
int delay = 2;
@ -70,14 +70,14 @@ void usb_task_idle() {
}
#if ENABLED(SDSUPPORT)
bool usb_task_msc_enable() { return ((main_b_msc_enable = true)); }
void usb_task_msc_disable() { main_b_msc_enable = false; }
bool usb_task_msc_isenabled() { return main_b_msc_enable; }
bool usb_task_msc_enable(void) { return ((main_b_msc_enable = true)); }
void usb_task_msc_disable(void) { main_b_msc_enable = false; }
bool usb_task_msc_isenabled(void) { return main_b_msc_enable; }
#endif
bool usb_task_cdc_enable(const uint8_t port) { UNUSED(port); return ((main_b_cdc_enable = true)); }
void usb_task_cdc_disable(const uint8_t port) { UNUSED(port); main_b_cdc_enable = false; main_b_dtr_active = false; }
bool usb_task_cdc_isenabled() { return main_b_cdc_enable; }
bool usb_task_cdc_isenabled(void) { return main_b_cdc_enable; }
/*! \brief Called by CDC interface
* Callback running when CDC device have received data
@ -121,7 +121,7 @@ void usb_task_cdc_set_dtr(const uint8_t port, const bool b_enable) {
}
}
bool usb_task_cdc_dtr_active() { return main_b_dtr_active; }
bool usb_task_cdc_dtr_active(void) { return main_b_dtr_active; }
/// Microsoft WCID descriptor
typedef struct USB_MicrosoftCompatibleDescriptor_Interface {
@ -202,7 +202,7 @@ static USB_MicrosoftExtendedPropertiesDescriptor microsoft_extended_properties_d
** WCID configuration information
** Hooked into UDC via UDC_GET_EXTRA_STRING #define.
*/
bool usb_task_extra_string() {
bool usb_task_extra_string(void) {
static uint8_t udi_msft_magic[] = "MSFT100\xEE";
static uint8_t udi_cdc_name[] = "CDC interface";
#if ENABLED(SDSUPPORT)
@ -262,7 +262,7 @@ bool usb_task_extra_string() {
/**************************************************************************************************
** Handle device requests that the ASF stack doesn't
*/
bool usb_task_other_requests() {
bool usb_task_other_requests(void) {
uint8_t* ptr = 0;
uint16_t size = 0;
@ -297,7 +297,7 @@ bool usb_task_other_requests() {
return true;
}
void usb_task_init() {
void usb_task_init(void) {
uint16_t *ptr;

View file

@ -58,12 +58,12 @@ extern "C" {
*
* \retval true if MSC startup is ok
*/
bool usb_task_msc_enable();
bool usb_task_msc_enable(void);
/*! \brief Called by MSC interface
* Callback running when USB Host disable MSC interface
*/
void usb_task_msc_disable();
void usb_task_msc_disable(void);
/*! \brief Opens the communication port
* This is called by CDC interface when USB Host enable it.
@ -84,25 +84,25 @@ void usb_task_cdc_set_dtr(const uint8_t port, const bool b_enable);
/*! \brief Check if MSC is enumerated and configured on the PC side
*/
bool usb_task_msc_isenabled();
bool usb_task_msc_isenabled(void);
/*! \brief Check if CDC is enumerated and configured on the PC side
*/
bool usb_task_cdc_isenabled();
bool usb_task_cdc_isenabled(void);
/*! \brief Check if CDC is actually OPEN by an application on the PC side
* assuming DTR signal means a program is listening to messages
*/
bool usb_task_cdc_dtr_active();
bool usb_task_cdc_dtr_active(void);
/*! \brief Called by UDC when USB Host request a extra string different
* of this specified in USB device descriptor
*/
bool usb_task_extra_string();
bool usb_task_extra_string(void);
/*! \brief Called by UDC when USB Host performs unknown requests
*/
bool usb_task_other_requests();
bool usb_task_other_requests(void);
/*! \brief Called by CDC interface
* Callback running when CDC device have received data
@ -117,15 +117,15 @@ void usb_task_cdc_config(const uint8_t port, usb_cdc_line_coding_t *cfg);
/*! \brief The USB device interrupt
*/
void USBD_ISR();
void USBD_ISR(void);
/*! \brief USB task init
*/
void usb_task_init();
void usb_task_init(void);
/*! \brief USB task idle
*/
void usb_task_idle();
void usb_task_idle(void);
#ifdef __cplusplus
}