SunRed/Marlin-Artillery-M600
Archived
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

Update CreatorPro Configuration_adv.h

Browse source
This commit is contained in:
Scott Lahteine 2019-01-19 16:37:26 -06:00
parent f4c16e683b
commit 02cc63d6d4
1 changed files with 9 additions and 25 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

34
Marlin/src/config/examples/FlashForge/CreatorPro/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/** /**
* Whenever an M104, M109, or M303 increases the target temperature, the * Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
@ -245,9 +247,6 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
//
//#define E0_AUTO_FAN E0_AUTO_FAN_PIN
//#define E1_AUTO_FAN E1_AUTO_FAN_PIN
/** /**
* Part-Cooling Fan Multiplexer * Part-Cooling Fan Multiplexer
@ -894,7 +893,6 @@
#if ENABLED(MOVE_Z_WHEN_IDLE) #if ENABLED(MOVE_Z_WHEN_IDLE)
#define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size.
#endif #endif
//#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping
#if ENABLED(BABYSTEP_ZPROBE_OFFSET) #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
//#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
@ -1488,22 +1486,6 @@
*/ */
//#define TMC_DEBUG //#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/** /**
* You can set your own advanced settings by filling in predefined functions. * You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page * A list of available functions can be found on the library github page
@ -1716,11 +1698,6 @@
*/ */
//#define CNC_COORDINATE_SYSTEMS //#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
#define PINS_DEBUGGING
/** /**
* Auto-report temperatures with M155 S<seconds> * Auto-report temperatures with M155 S<seconds>
*/ */
@ -1976,5 +1953,12 @@
#define WIFI_PWD "Wifi Password" #define WIFI_PWD "Wifi Password"
#endif #endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands // Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE //#define MARLIN_DEV_MODE