STM32F1: Sync SPI changes from maple master (#15266)

This commit is contained in:
Tanguy Pruvot 2019-09-15 20:46:17 +02:00 committed by Scott Lahteine
parent 20fbb751f1
commit 02d400e413
2 changed files with 19 additions and 23 deletions

View file

@ -178,8 +178,7 @@ void SPIClass::end() {
// FIXME [0.1.0] remove this once you have an interrupt based driver // FIXME [0.1.0] remove this once you have an interrupt based driver
volatile uint16_t rx __attribute__((unused)) = spi_rx_reg(_currentSetting->spi_d); volatile uint16_t rx __attribute__((unused)) = spi_rx_reg(_currentSetting->spi_d);
} }
while (!spi_is_tx_empty(_currentSetting->spi_d)) { /* nada */ } waitSpiTxEnd(_currentSetting->spi_d);
while (spi_is_busy(_currentSetting->spi_d)) { /* nada */ }
spi_peripheral_disable(_currentSetting->spi_d); spi_peripheral_disable(_currentSetting->spi_d);
// added for DMA callbacks. // added for DMA callbacks.
@ -297,8 +296,7 @@ void SPIClass::write(uint16_t data) {
* This almost doubles the speed of this function. * This almost doubles the speed of this function.
*/ */
spi_tx_reg(_currentSetting->spi_d, data); // write the data to be transmitted into the SPI_DR register (this clears the TXE flag) spi_tx_reg(_currentSetting->spi_d, data); // write the data to be transmitted into the SPI_DR register (this clears the TXE flag)
while (!spi_is_tx_empty(_currentSetting->spi_d)) { /* nada */ } // "5. Wait until TXE=1 ..." waitSpiTxEnd(_currentSetting->spi_d);
while (spi_is_busy(_currentSetting->spi_d)) { /* nada */ } // "... and then wait until BSY=0 before disabling the SPI."
} }
void SPIClass::write16(uint16_t data) { void SPIClass::write16(uint16_t data) {
@ -306,8 +304,7 @@ void SPIClass::write16(uint16_t data) {
spi_tx_reg(_currentSetting->spi_d, data>>8); // write high byte spi_tx_reg(_currentSetting->spi_d, data>>8); // write high byte
while (!spi_is_tx_empty(_currentSetting->spi_d)) { /* nada */ } // Wait until TXE=1 while (!spi_is_tx_empty(_currentSetting->spi_d)) { /* nada */ } // Wait until TXE=1
spi_tx_reg(_currentSetting->spi_d, data); // write low byte spi_tx_reg(_currentSetting->spi_d, data); // write low byte
while (!spi_is_tx_empty(_currentSetting->spi_d)) { /* nada */ } // Wait until TXE=1 waitSpiTxEnd(_currentSetting->spi_d);
while (spi_is_busy(_currentSetting->spi_d)) { /* nada */ } // wait until BSY=0
} }
void SPIClass::write(uint16_t data, uint32_t n) { void SPIClass::write(uint16_t data, uint32_t n) {
@ -323,16 +320,14 @@ void SPIClass::write(uint16_t data, uint32_t n) {
void SPIClass::write(const void *data, uint32_t length) { void SPIClass::write(const void *data, uint32_t length) {
spi_dev * spi_d = _currentSetting->spi_d; spi_dev * spi_d = _currentSetting->spi_d;
spi_tx(spi_d, data, length); // data can be array of bytes or words spi_tx(spi_d, data, length); // data can be array of bytes or words
while (!spi_is_tx_empty(spi_d)) { /* nada */ } // "5. Wait until TXE=1 ..." waitSpiTxEnd(spi_d);
while (spi_is_busy(spi_d)) { /* nada */ } // "... and then wait until BSY=0 before disabling the SPI."
} }
uint8_t SPIClass::transfer(uint8_t byte) const { uint8_t SPIClass::transfer(uint8_t byte) const {
spi_dev * spi_d = _currentSetting->spi_d; spi_dev * spi_d = _currentSetting->spi_d;
spi_rx_reg(spi_d); // read any previous data spi_rx_reg(spi_d); // read any previous data
spi_tx_reg(spi_d, byte); // Write the data item to be transmitted into the SPI_DR register spi_tx_reg(spi_d, byte); // Write the data item to be transmitted into the SPI_DR register
while (!spi_is_tx_empty(spi_d)) { /* nada */ } // "5. Wait until TXE=1 ..." waitSpiTxEnd(spi_d);
while (spi_is_busy(spi_d)) { /* nada */ } // "... and then wait until BSY=0 before disabling the SPI."
return (uint8)spi_rx_reg(spi_d); // "... and read the last received data." return (uint8)spi_rx_reg(spi_d); // "... and read the last received data."
} }
@ -342,12 +337,10 @@ uint16_t SPIClass::transfer16(uint16_t data) const {
spi_dev * spi_d = _currentSetting->spi_d; spi_dev * spi_d = _currentSetting->spi_d;
spi_rx_reg(spi_d); // read any previous data spi_rx_reg(spi_d); // read any previous data
spi_tx_reg(spi_d, data>>8); // write high byte spi_tx_reg(spi_d, data>>8); // write high byte
while (!spi_is_tx_empty(spi_d)) { /* nada */ } // wait until TXE=1 waitSpiTxEnd(spi_d); // wait until TXE=1 and then wait until BSY=0
while (spi_is_busy(spi_d)) { /* nada */ } // wait until BSY=0
uint16_t ret = spi_rx_reg(spi_d)<<8; // read and shift high byte uint16_t ret = spi_rx_reg(spi_d)<<8; // read and shift high byte
spi_tx_reg(spi_d, data); // write low byte spi_tx_reg(spi_d, data); // write low byte
while (!spi_is_tx_empty(spi_d)) { /* nada */ } // wait until TXE=1 waitSpiTxEnd(spi_d); // wait until TXE=1 and then wait until BSY=0
while (spi_is_busy(spi_d)) { /* nada */ } // wait until BSY=0
ret += spi_rx_reg(spi_d); // read low byte ret += spi_rx_reg(spi_d); // read low byte
return ret; return ret;
} }
@ -400,8 +393,7 @@ uint8_t SPIClass::dmaTransferRepeat(uint16_t length) {
if ((millis() - m) > DMA_TIMEOUT) { b = 2; break; } if ((millis() - m) > DMA_TIMEOUT) { b = 2; break; }
} }
while (!spi_is_tx_empty(_currentSetting->spi_d)) { /* nada */ } // "5. Wait until TXE=1 ..." waitSpiTxEnd(_currentSetting->spi_d); // until TXE=1 and BSY=0
while (spi_is_busy(_currentSetting->spi_d)) { /* nada */ } // "... and then wait until BSY=0 before disabling the SPI."
spi_tx_dma_disable(_currentSetting->spi_d); spi_tx_dma_disable(_currentSetting->spi_d);
spi_rx_dma_disable(_currentSetting->spi_d); spi_rx_dma_disable(_currentSetting->spi_d);
dma_disable(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel); dma_disable(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel);
@ -456,8 +448,7 @@ uint8_t SPIClass::dmaSendRepeat(uint16_t length) {
// Avoid interrupts and just loop waiting for the flag to be set. // Avoid interrupts and just loop waiting for the flag to be set.
if ((millis() - m) > DMA_TIMEOUT) { b = 2; break; } if ((millis() - m) > DMA_TIMEOUT) { b = 2; break; }
} }
while (!spi_is_tx_empty(_currentSetting->spi_d)) { /* nada */ } // "5. Wait until TXE=1 ..." waitSpiTxEnd(_currentSetting->spi_d); // until TXE=1 and BSY=0
while (spi_is_busy(_currentSetting->spi_d)) { /* nada */ } // "... and then wait until BSY=0 before disabling the SPI."
spi_tx_dma_disable(_currentSetting->spi_d); spi_tx_dma_disable(_currentSetting->spi_d);
dma_disable(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel); dma_disable(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel);
dma_clear_isr_bits(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel); dma_clear_isr_bits(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel);
@ -480,9 +471,7 @@ uint8_t SPIClass::dmaSendAsync(const void * transmitBuf, uint16_t length, bool m
//delayMicroseconds(10); //delayMicroseconds(10);
if ((millis() - m) > DMA_TIMEOUT) { b = 2; break; } if ((millis() - m) > DMA_TIMEOUT) { b = 2; break; }
} }
waitSpiTxEnd(_currentSetting->spi_d); // until TXE=1 and BSY=0
while (!spi_is_tx_empty(_currentSetting->spi_d)) { /* nada */ } // "5. Wait until TXE=1 ..."
while (spi_is_busy(_currentSetting->spi_d)) { /* nada */ } // "... and then wait until BSY=0 before disabling the SPI."
spi_tx_dma_disable(_currentSetting->spi_d); spi_tx_dma_disable(_currentSetting->spi_d);
dma_disable(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel); dma_disable(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel);
_currentSetting->state = SPI_STATE_READY; _currentSetting->state = SPI_STATE_READY;
@ -572,8 +561,7 @@ void SPIClass::onTransmit(void(*callback)(void)) {
* during the initial setup and only set the callback to EventCallback if they are set. * during the initial setup and only set the callback to EventCallback if they are set.
*/ */
void SPIClass::EventCallback() { void SPIClass::EventCallback() {
while (!spi_is_tx_empty(_currentSetting->spi_d)) { /* nada */ } // "5. Wait until TXE=1 ..." waitSpiTxEnd(_currentSetting->spi_d);
while (spi_is_busy(_currentSetting->spi_d)) { /* nada */ } // "... and then wait until BSY=0"
switch (_currentSetting->state) { switch (_currentSetting->state) {
case SPI_STATE_TRANSFER: case SPI_STATE_TRANSFER:
while (spi_is_rx_nonempty(_currentSetting->spi_d)) { /* nada */ } while (spi_is_rx_nonempty(_currentSetting->spi_d)) { /* nada */ }

View file

@ -406,4 +406,12 @@ private:
*/ */
}; };
/**
* @brief Wait until TXE (tx empty) flag is set and BSY (busy) flag unset.
*/
static inline void waitSpiTxEnd(spi_dev *spi_d) {
while (spi_is_tx_empty(spi_d) == 0) { /* nada */ } // wait until TXE=1
while (spi_is_busy(spi_d) != 0) { /* nada */ } // wait until BSY=0
}
extern SPIClass SPI; extern SPIClass SPI;