From 055c4beaf992a16b15d18e74d628a50ddb6d05b1 Mon Sep 17 00:00:00 2001 From: DocDawning Date: Sun, 1 Feb 2015 17:06:38 -0700 Subject: [PATCH] Normalized section headers, added some headers, added help URLs for newbies --- Marlin/Configuration.h | 48 ++++++++++++++++++++++++++++++++---------- 1 file changed, 37 insertions(+), 11 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index f5c218dc7..552fd7133 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -3,6 +3,20 @@ #include "boards.h" +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== +/* +Here are some standard links for getting your machine calibrated: + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 +*/ + // This configuration file contains the basic settings. // Advanced settings can be found in Configuration_adv.h // BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration @@ -67,7 +81,7 @@ // #define PS_DEFAULT_OFF //=========================================================================== -//=============================Thermal Settings ============================ +//============================= Thermal Settings ============================ //=========================================================================== // //--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table @@ -143,7 +157,11 @@ //#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R //#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R -// PID settings: +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + // Comment the following line to disable PID and enable bang-bang. #define PIDTEMP #define BANG_MAX 255 // limits current to nozzle while in bang-bang mode; 255=full current @@ -177,7 +195,9 @@ // #define DEFAULT_Kd 440 #endif // PIDTEMP -// Bed Temperature Control +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== // Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis // // Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. @@ -214,7 +234,6 @@ #endif // PIDTEMPBED - //this prevents dangerous Extruder moves, i.e. if the temperature is under the limit //can be software-disabled for whatever purposes by #define PREVENT_DANGEROUS_EXTRUDE @@ -224,7 +243,10 @@ #define EXTRUDE_MINTEMP 170 #define EXTRUDE_MAXLENGTH (X_MAX_LENGTH+Y_MAX_LENGTH) //prevent extrusion of very large distances. -/*================== Thermal Runaway Protection ============================== +//=========================================================================== +//============================= Thermal Runaway Protection ================== +//=========================================================================== +/* This is a feature to protect your printer from burn up in flames if it has a thermistor coming off place (this happened to a friend of mine recently and motivated me writing this feature). @@ -259,11 +281,10 @@ your extruder heater takes 2 minutes to hit the target on heating. // Parameters for the bed heater //#define THERMAL_RUNAWAY_PROTECTION_BED_PERIOD 20 //in seconds //#define THERMAL_RUNAWAY_PROTECTION_BED_HYSTERESIS 2 // in degree Celsius -//=========================================================================== //=========================================================================== -//=============================Mechanical Settings=========================== +//============================= Mechanical Settings ========================= //=========================================================================== // Uncomment the following line to enable CoreXY kinematics @@ -335,7 +356,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define min_software_endstops true // If true, axis won't move to coordinates less than HOME_POS. #define max_software_endstops true // If true, axis won't move to coordinates greater than the defined lengths below. -// Travel limits after homing +// Travel limits after homing (units are in mm) #define X_MAX_POS 205 #define X_MIN_POS 0 #define Y_MAX_POS 205 @@ -346,7 +367,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define X_MAX_LENGTH (X_MAX_POS - X_MIN_POS) #define Y_MAX_LENGTH (Y_MAX_POS - Y_MIN_POS) #define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS) + + +//=========================================================================== //============================= Bed Auto Leveling =========================== +//=========================================================================== //#define ENABLE_AUTO_BED_LEVELING // Delete the comment to enable (remove // at the start of the line) #define Z_PROBE_REPEATABILITY_TEST // If not commented out, Z-Probe Repeatability test will be included if Auto Bed Leveling is Enabled. @@ -499,9 +524,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define DEFAULT_ZJERK 0.4 // (mm/sec) #define DEFAULT_EJERK 5.0 // (mm/sec) -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= // Custom M code points #define CUSTOM_M_CODES