SunRed/Marlin-Artillery-M600
Archived
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

Merge pull request #10858 from thinkyhead/bf2_rename_some_options

Browse source 
[2.0.x] Rename and document some configuration options
This commit is contained in:
Scott Lahteine 2018-05-26 18:42:39 -05:00 committed by GitHub
commit 05fc761929
Signed by: GitHub
GPG key ID: 4AEE18F83AFDEB23
124 changed files with 315 additions and 377 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
.travis.yml
View file

@ -453,7 +453,7 @@ script:
- export TEST_PLATFORM="-e DUE" - export TEST_PLATFORM="-e DUE"
- restore_configs - restore_configs
- opt_set MOTHERBOARD BOARD_RAMPS4DUE_EFB - opt_set MOTHERBOARD BOARD_RAMPS4DUE_EFB
- opt_set BEZIER_JERK_CONTROL - opt_set S_CURVE_ACCELERATION
- cp Marlin/Configuration.h Marlin/src/config/default/Configuration.h - cp Marlin/Configuration.h Marlin/src/config/default/Configuration.h
- cp Marlin/Configuration_adv.h Marlin/src/config/default/Configuration_adv.h - cp Marlin/Configuration_adv.h Marlin/src/config/default/Configuration_adv.h
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM} - build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}

5
Marlin/Configuration.h
View file

@ -639,15 +639,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/default/Configuration.h
View file

@ -639,15 +639,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/default/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
View file

@ -658,15 +658,14 @@
#define DEFAULT_EJERK 10.0 #define DEFAULT_EJERK 10.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,4,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 4, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
View file

@ -638,15 +638,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

5
Marlin/src/config/examples/Anet/A6/Configuration.h
View file

@ -686,15 +686,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/Anet/A6/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/Anet/A8/Configuration.h
View file

@ -645,15 +645,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/Anet/A8/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
View file

@ -638,15 +638,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
View file

@ -638,15 +638,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
View file

@ -638,15 +638,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/BQ/Hephestos/Configuration.h
View file

@ -626,15 +626,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
View file

@ -639,15 +639,14 @@
#define DEFAULT_EJERK 1.0 #define DEFAULT_EJERK 1.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/BQ/WITBOX/Configuration.h
View file

@ -626,15 +626,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/Cartesio/Configuration.h
View file

@ -637,15 +637,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/Cartesio/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/Creality/CR-10/Configuration.h
View file

@ -648,15 +648,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/Creality/CR-10S/Configuration.h
View file

@ -638,15 +638,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
View file

@ -657,15 +657,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/Creality/CR-8/Configuration.h
View file

@ -648,15 +648,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/Creality/Ender-2/Configuration.h
View file

@ -642,15 +642,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/Creality/Ender-3/Configuration.h
View file

@ -642,15 +642,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/Creality/Ender-4/Configuration.h
View file

@ -648,15 +648,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/Felix/Configuration.h
View file

@ -620,15 +620,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/Felix/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/Felix/DUAL/Configuration.h
View file

@ -620,15 +620,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

5
Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
View file

@ -644,15 +644,14 @@
#define DEFAULT_EJERK 4.0 #define DEFAULT_EJERK 4.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
View file

@ -653,15 +653,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

5
Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
View file

@ -638,15 +638,14 @@
#define DEFAULT_EJERK 4.0 #define DEFAULT_EJERK 4.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

5
Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
View file

@ -653,15 +653,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

5
Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
View file

@ -653,15 +653,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

5
Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
View file

@ -638,15 +638,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
View file

@ -638,15 +638,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
View file

@ -642,15 +642,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/JGAurora/A5/Configuration.h
View file

@ -650,15 +650,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/MakerParts/Configuration.h
View file

@ -658,15 +658,14 @@
#define DEFAULT_EJERK 8.0 #define DEFAULT_EJERK 8.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/MakerParts/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/Malyan/M150/Configuration.h
View file

@ -658,15 +658,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/Malyan/M200/Configuration.h
View file

@ -637,15 +637,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
View file

@ -642,15 +642,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

5
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
View file

@ -642,15 +642,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/Mks/Sbase/Configuration.h
View file

@ -638,15 +638,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h
View file

@ -678,15 +678,14 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

5
Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
View file

@ -638,15 +638,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

5
Marlin/src/config/examples/RigidBot/Configuration.h
View file

@ -636,15 +636,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/RigidBot/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/SCARA/Configuration.h
View file

@ -651,15 +651,14 @@
#define DEFAULT_EJERK 3.0 #define DEFAULT_EJERK 3.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/SCARA/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/STM32F10/Configuration.h
View file

@ -640,15 +640,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

5
Marlin/src/config/examples/STM32F4/Configuration.h
View file

@ -638,15 +638,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

5
Marlin/src/config/examples/Sanguinololu/Configuration.h
View file

@ -669,15 +669,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/TheBorg/Configuration.h
View file

@ -638,15 +638,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/TheBorg/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/TinyBoy2/Configuration.h
View file

@ -689,15 +689,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/Tronxy/X1/Configuration.h
View file

@ -638,15 +638,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

5
Marlin/src/config/examples/Tronxy/X5S/Configuration.h
View file

@ -638,15 +638,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

5
Marlin/src/config/examples/Tronxy/XY100/Configuration.h
View file

@ -649,15 +649,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

5
Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
View file

@ -638,15 +638,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/Velleman/K8200/Configuration.h
View file

@ -667,15 +667,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
View file

@ -449,13 +449,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/Velleman/K8400/Configuration.h
View file

@ -638,15 +638,14 @@
#define DEFAULT_EJERK 20.0 #define DEFAULT_EJERK 20.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
View file

@ -638,15 +638,14 @@
#define DEFAULT_EJERK 20.0 #define DEFAULT_EJERK 20.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

5
Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h
View file

@ -648,15 +648,14 @@
#define DEFAULT_EJERK 1.0 #define DEFAULT_EJERK 1.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/adafruit/ST7565/Configuration.h
View file

@ -638,15 +638,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

5
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
View file

@ -720,15 +720,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
View file

@ -448,13 +448,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
View file

@ -720,15 +720,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
View file

@ -448,13 +448,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
View file

@ -720,15 +720,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
View file

@ -448,13 +448,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h
View file

@ -725,15 +725,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

5
Marlin/src/config/examples/delta/generic/Configuration.h
View file

@ -710,15 +710,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/delta/generic/Configuration_adv.h
View file

@ -448,13 +448,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/delta/kossel_mini/Configuration.h
View file

@ -710,15 +710,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
View file

@ -448,13 +448,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/delta/kossel_pro/Configuration.h
View file

@ -703,15 +703,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
View file

@ -453,13 +453,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/delta/kossel_xl/Configuration.h
View file

@ -713,15 +713,14 @@
#define DEFAULT_EJERK 20.0 #define DEFAULT_EJERK 20.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
View file

@ -448,13 +448,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
View file

@ -651,15 +651,14 @@
#define DEFAULT_EJERK 4.0 #define DEFAULT_EJERK 4.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/makibox/Configuration.h
View file

@ -641,15 +641,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/makibox/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/stm32f103ret6/Configuration.h
View file

@ -640,15 +640,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

5
Marlin/src/config/examples/tvrrug/Round2/Configuration.h
View file

@ -633,15 +633,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

5
Marlin/src/config/examples/wt150/Configuration.h
View file

@ -643,15 +643,14 @@
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
/** /**
* Realtime Jerk Control * S-Curve Acceleration
* *
* This option eliminates vibration during printing by fitting a Bézier * This option eliminates vibration during printing by fitting a Bézier
* curve to move acceleration, producing much smoother direction changes. * curve to move acceleration, producing much smoother direction changes.
* Because this is computationally-intensive, a 32-bit MCU is required.
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
//#define BEZIER_JERK_CONTROL //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================

6
Marlin/src/config/examples/wt150/Configuration_adv.h
View file

@ -446,13 +446,13 @@
// //
//#define JUNCTION_DEVIATION //#define JUNCTION_DEVIATION
#if ENABLED(JUNCTION_DEVIATION) #if ENABLED(JUNCTION_DEVIATION)
#define JUNCTION_DEVIATION_FACTOR 0.05 #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
#define JUNCTION_ACCELERATION_FACTOR 1000 #define JUNCTION_ACCELERATION 1000 // (mm/s²) Maximum centripetal acceleration
//#define JUNCTION_DEVIATION_INCLUDE_E //#define JUNCTION_DEVIATION_INCLUDE_E
#endif #endif
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
/** /**
* @section stepper motor current * @section stepper motor current

6
Marlin/src/inc/SanityCheck.h
View file

@ -273,6 +273,12 @@
#error "FILAMENT_CHANGE_LOAD_LENGTH is now FILAMENT_CHANGE_FAST_LOAD_LENGTH. Please update your configuration." #error "FILAMENT_CHANGE_LOAD_LENGTH is now FILAMENT_CHANGE_FAST_LOAD_LENGTH. Please update your configuration."
#elif ENABLED(LEVEL_BED_CORNERS) && !defined(LEVEL_CORNERS_INSET) #elif ENABLED(LEVEL_BED_CORNERS) && !defined(LEVEL_CORNERS_INSET)
#error "LEVEL_BED_CORNERS requires a LEVEL_CORNERS_INSET value. Please update your Configuration.h." #error "LEVEL_BED_CORNERS requires a LEVEL_CORNERS_INSET value. Please update your Configuration.h."
#elif defined(BEZIER_JERK_CONTROL)
#error "BEZIER_JERK_CONTROL is now S_CURVE_ACCELERATION. Please update your configuration."
#elif defined(JUNCTION_DEVIATION_FACTOR)
#error "JUNCTION_DEVIATION_FACTOR is now JUNCTION_DEVIATION_MM. Please update your configuration."
#elif defined(JUNCTION_ACCELERATION_FACTOR)
#error "JUNCTION_ACCELERATION_FACTOR is now JUNCTION_ACCELERATION. Please update your configuration."
#endif #endif
#define BOARD_MKS_13 -47 #define BOARD_MKS_13 -47

18
Marlin/src/module/planner.cpp
View file

@ -232,7 +232,7 @@ void Planner::init() {
delay_before_delivering = 0; delay_before_delivering = 0;
} }
#if ENABLED(BEZIER_JERK_CONTROL) #if ENABLED(S_CURVE_ACCELERATION)
#ifdef __AVR__ #ifdef __AVR__
// This routine, for AVR, returns 0x1000000 / d, but trying to get the inverse as // This routine, for AVR, returns 0x1000000 / d, but trying to get the inverse as
@ -761,7 +761,7 @@ void Planner::calculate_trapezoid_for_block(block_t* const block, const float &e
NOLESS(initial_rate, uint32_t(MINIMAL_STEP_RATE)); NOLESS(initial_rate, uint32_t(MINIMAL_STEP_RATE));
NOLESS(final_rate, uint32_t(MINIMAL_STEP_RATE)); NOLESS(final_rate, uint32_t(MINIMAL_STEP_RATE));
#if ENABLED(BEZIER_JERK_CONTROL) #if ENABLED(S_CURVE_ACCELERATION)
uint32_t cruise_rate = initial_rate; uint32_t cruise_rate = initial_rate;
#endif #endif
@ -782,12 +782,12 @@ void Planner::calculate_trapezoid_for_block(block_t* const block, const float &e
accelerate_steps = MIN(uint32_t(MAX(accelerate_steps_float, 0)), block->step_event_count); accelerate_steps = MIN(uint32_t(MAX(accelerate_steps_float, 0)), block->step_event_count);
plateau_steps = 0; plateau_steps = 0;
#if ENABLED(BEZIER_JERK_CONTROL) #if ENABLED(S_CURVE_ACCELERATION)
// We won't reach the cruising rate. Let's calculate the speed we will reach // We won't reach the cruising rate. Let's calculate the speed we will reach
cruise_rate = final_speed(initial_rate, accel, accelerate_steps); cruise_rate = final_speed(initial_rate, accel, accelerate_steps);
#endif #endif
} }
#if ENABLED(BEZIER_JERK_CONTROL) #if ENABLED(S_CURVE_ACCELERATION)
else // We have some plateau time, so the cruise rate will be the nominal rate else // We have some plateau time, so the cruise rate will be the nominal rate
cruise_rate = block->nominal_rate; cruise_rate = block->nominal_rate;
#endif #endif
@ -795,7 +795,7 @@ void Planner::calculate_trapezoid_for_block(block_t* const block, const float &e
// block->accelerate_until = accelerate_steps; // block->accelerate_until = accelerate_steps;
// block->decelerate_after = accelerate_steps+plateau_steps; // block->decelerate_after = accelerate_steps+plateau_steps;
#if ENABLED(BEZIER_JERK_CONTROL) #if ENABLED(S_CURVE_ACCELERATION)
// Jerk controlled speed requires to express speed versus time, NOT steps // Jerk controlled speed requires to express speed versus time, NOT steps
uint32_t acceleration_time = ((float)(cruise_rate - initial_rate) / accel) * (HAL_STEPPER_TIMER_RATE), uint32_t acceleration_time = ((float)(cruise_rate - initial_rate) / accel) * (HAL_STEPPER_TIMER_RATE),
deceleration_time = ((float)(cruise_rate - final_rate) / accel) * (HAL_STEPPER_TIMER_RATE); deceleration_time = ((float)(cruise_rate - final_rate) / accel) * (HAL_STEPPER_TIMER_RATE);
@ -815,7 +815,7 @@ void Planner::calculate_trapezoid_for_block(block_t* const block, const float &e
block->accelerate_until = accelerate_steps; block->accelerate_until = accelerate_steps;
block->decelerate_after = accelerate_steps + plateau_steps; block->decelerate_after = accelerate_steps + plateau_steps;
block->initial_rate = initial_rate; block->initial_rate = initial_rate;
#if ENABLED(BEZIER_JERK_CONTROL) #if ENABLED(S_CURVE_ACCELERATION)
block->acceleration_time = acceleration_time; block->acceleration_time = acceleration_time;
block->deceleration_time = deceleration_time; block->deceleration_time = deceleration_time;
block->acceleration_time_inverse = acceleration_time_inverse; block->acceleration_time_inverse = acceleration_time_inverse;
@ -2136,7 +2136,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
} }
block->acceleration_steps_per_s2 = accel; block->acceleration_steps_per_s2 = accel;
block->acceleration = accel / steps_per_mm; block->acceleration = accel / steps_per_mm;
#if DISABLED(BEZIER_JERK_CONTROL) #if DISABLED(S_CURVE_ACCELERATION)
block->acceleration_rate = (uint32_t)(accel * (4096.0 * 4096.0 / (HAL_STEPPER_TIMER_RATE))); block->acceleration_rate = (uint32_t)(accel * (4096.0 * 4096.0 / (HAL_STEPPER_TIMER_RATE)));
#endif #endif
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
@ -2230,7 +2230,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
// TODO: Technically, the acceleration used in calculation needs to be limited by the minimum of the // TODO: Technically, the acceleration used in calculation needs to be limited by the minimum of the
// two junctions. However, this shouldn't be a significant problem except in extreme circumstances. // two junctions. However, this shouldn't be a significant problem except in extreme circumstances.
vmax_junction_sqr = (JUNCTION_ACCELERATION_FACTOR * JUNCTION_DEVIATION_FACTOR * sin_theta_d2) / (1.0 - sin_theta_d2); vmax_junction_sqr = (JUNCTION_ACCELERATION * JUNCTION_DEVIATION_MM * sin_theta_d2) / (1.0 - sin_theta_d2);
if (block->millimeters < 1.0) { if (block->millimeters < 1.0) {
// Fast acos approximation, minus the error bar to be safe // Fast acos approximation, minus the error bar to be safe
@ -2238,7 +2238,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
// If angle is greater than 135 degrees (octagon), find speed for approximate arc // If angle is greater than 135 degrees (octagon), find speed for approximate arc
if (junction_theta > RADIANS(135)) { if (junction_theta > RADIANS(135)) {
const float limit_sqr = block->millimeters / (RADIANS(180) - junction_theta) * JUNCTION_ACCELERATION_FACTOR; const float limit_sqr = block->millimeters / (RADIANS(180) - junction_theta) * JUNCTION_ACCELERATION;
NOMORE(vmax_junction_sqr, limit_sqr); NOMORE(vmax_junction_sqr, limit_sqr);
} }
} }

4
Marlin/src/module/planner.h
View file

@ -115,7 +115,7 @@ typedef struct {
uint32_t accelerate_until, // The index of the step event on which to stop acceleration uint32_t accelerate_until, // The index of the step event on which to stop acceleration
decelerate_after; // The index of the step event on which to start decelerating decelerate_after; // The index of the step event on which to start decelerating
#if ENABLED(BEZIER_JERK_CONTROL) #if ENABLED(S_CURVE_ACCELERATION)
uint32_t cruise_rate; // The actual cruise rate to use, between end of the acceleration phase and start of deceleration phase uint32_t cruise_rate; // The actual cruise rate to use, between end of the acceleration phase and start of deceleration phase
uint32_t acceleration_time, // Acceleration time and deceleration time in STEP timer counts uint32_t acceleration_time, // Acceleration time and deceleration time in STEP timer counts
deceleration_time; deceleration_time;
@ -782,7 +782,7 @@ class Planner {
return target_velocity_sqr - 2 * accel * distance; return target_velocity_sqr - 2 * accel * distance;
} }
#if ENABLED(BEZIER_JERK_CONTROL) #if ENABLED(S_CURVE_ACCELERATION)
/** /**
* Calculate the speed reached given initial speed, acceleration and distance * Calculate the speed reached given initial speed, acceleration and distance
*/ */

16
Marlin/src/module/stepper.cpp
View file

@ -118,7 +118,7 @@ int32_t Stepper::counter_X = 0,
uint32_t Stepper::step_events_completed = 0; // The number of step events executed in the current block uint32_t Stepper::step_events_completed = 0; // The number of step events executed in the current block
#if ENABLED(BEZIER_JERK_CONTROL) #if ENABLED(S_CURVE_ACCELERATION)
int32_t __attribute__((used)) Stepper::bezier_A __asm__("bezier_A"); // A coefficient in Bézier speed curve with alias for assembler int32_t __attribute__((used)) Stepper::bezier_A __asm__("bezier_A"); // A coefficient in Bézier speed curve with alias for assembler
int32_t __attribute__((used)) Stepper::bezier_B __asm__("bezier_B"); // B coefficient in Bézier speed curve with alias for assembler int32_t __attribute__((used)) Stepper::bezier_B __asm__("bezier_B"); // B coefficient in Bézier speed curve with alias for assembler
int32_t __attribute__((used)) Stepper::bezier_C __asm__("bezier_C"); // C coefficient in Bézier speed curve with alias for assembler int32_t __attribute__((used)) Stepper::bezier_C __asm__("bezier_C"); // C coefficient in Bézier speed curve with alias for assembler
@ -168,7 +168,7 @@ volatile signed char Stepper::count_direction[NUM_AXIS] = { 1, 1, 1, 1 };
uint32_t Stepper::ticks_nominal; uint32_t Stepper::ticks_nominal;
uint8_t Stepper::step_loops, Stepper::step_loops_nominal; uint8_t Stepper::step_loops, Stepper::step_loops_nominal;
#if DISABLED(BEZIER_JERK_CONTROL) #if DISABLED(S_CURVE_ACCELERATION)
uint32_t Stepper::acc_step_rate; // needed for deceleration start point uint32_t Stepper::acc_step_rate; // needed for deceleration start point
#endif #endif
@ -318,7 +318,7 @@ void Stepper::set_directions() {
#endif // !LIN_ADVANCE #endif // !LIN_ADVANCE
} }
#if ENABLED(BEZIER_JERK_CONTROL) #if ENABLED(S_CURVE_ACCELERATION)
/** /**
* We are using a quintic (fifth-degree) Bézier polynomial for the velocity curve. * We are using a quintic (fifth-degree) Bézier polynomial for the velocity curve.
* This gives us a "linear pop" velocity curve; with pop being the sixth derivative of position: * This gives us a "linear pop" velocity curve; with pop being the sixth derivative of position:
@ -1122,7 +1122,7 @@ void Stepper::set_directions() {
#endif #endif
} }
#endif #endif
#endif // BEZIER_JERK_CONTROL #endif // S_CURVE_ACCELERATION
/** /**
* Stepper Driver Interrupt * Stepper Driver Interrupt
@ -1497,7 +1497,7 @@ uint32_t Stepper::stepper_block_phase_isr() {
// Calculate new timer value // Calculate new timer value
if (step_events_completed <= current_block->accelerate_until) { if (step_events_completed <= current_block->accelerate_until) {
#if ENABLED(BEZIER_JERK_CONTROL) #if ENABLED(S_CURVE_ACCELERATION)
// Get the next speed to use (Jerk limited!) // Get the next speed to use (Jerk limited!)
uint32_t acc_step_rate = uint32_t acc_step_rate =
acceleration_time < current_block->acceleration_time acceleration_time < current_block->acceleration_time
@ -1528,7 +1528,7 @@ uint32_t Stepper::stepper_block_phase_isr() {
else if (step_events_completed > current_block->decelerate_after) { else if (step_events_completed > current_block->decelerate_after) {
uint32_t step_rate; uint32_t step_rate;
#if ENABLED(BEZIER_JERK_CONTROL) #if ENABLED(S_CURVE_ACCELERATION)
// If this is the 1st time we process the 2nd half of the trapezoid... // If this is the 1st time we process the 2nd half of the trapezoid...
if (!bezier_2nd_half) { if (!bezier_2nd_half) {
// Initialize the Bézier speed curve // Initialize the Bézier speed curve
@ -1726,12 +1726,12 @@ uint32_t Stepper::stepper_block_phase_isr() {
// make a note of the number of step loops required at nominal speed // make a note of the number of step loops required at nominal speed
step_loops_nominal = step_loops; step_loops_nominal = step_loops;
#if DISABLED(BEZIER_JERK_CONTROL) #if DISABLED(S_CURVE_ACCELERATION)
// Set as deceleration point the initial rate of the block // Set as deceleration point the initial rate of the block
acc_step_rate = current_block->initial_rate; acc_step_rate = current_block->initial_rate;
#endif #endif
#if ENABLED(BEZIER_JERK_CONTROL) #if ENABLED(S_CURVE_ACCELERATION)
// Initialize the Bézier speed curve // Initialize the Bézier speed curve
_calc_bezier_curve_coeffs(current_block->initial_rate, current_block->cruise_rate, current_block->acceleration_time_inverse); _calc_bezier_curve_coeffs(current_block->initial_rate, current_block->cruise_rate, current_block->acceleration_time_inverse);

6
Marlin/src/module/stepper.h
View file

@ -94,7 +94,7 @@ class Stepper {
static int32_t counter_X, counter_Y, counter_Z, counter_E; static int32_t counter_X, counter_Y, counter_Z, counter_E;
static uint32_t step_events_completed; // The number of step events executed in the current block static uint32_t step_events_completed; // The number of step events executed in the current block
#if ENABLED(BEZIER_JERK_CONTROL) #if ENABLED(S_CURVE_ACCELERATION)
static int32_t bezier_A, // A coefficient in Bézier speed curve static int32_t bezier_A, // A coefficient in Bézier speed curve
bezier_B, // B coefficient in Bézier speed curve bezier_B, // B coefficient in Bézier speed curve
bezier_C; // C coefficient in Bézier speed curve bezier_C; // C coefficient in Bézier speed curve
@ -128,7 +128,7 @@ class Stepper {
static uint8_t step_loops, step_loops_nominal; static uint8_t step_loops, step_loops_nominal;
static uint32_t ticks_nominal; static uint32_t ticks_nominal;
#if DISABLED(BEZIER_JERK_CONTROL) #if DISABLED(S_CURVE_ACCELERATION)
static uint32_t acc_step_rate; // needed for deceleration start point static uint32_t acc_step_rate; // needed for deceleration start point
#endif #endif
@ -333,7 +333,7 @@ class Stepper {
return timer; return timer;
} }
#if ENABLED(BEZIER_JERK_CONTROL) #if ENABLED(S_CURVE_ACCELERATION)
static void _calc_bezier_curve_coeffs(const int32_t v0, const int32_t v1, const uint32_t av); static void _calc_bezier_curve_coeffs(const int32_t v0, const int32_t v1, const uint32_t av);
static int32_t _eval_bezier_curve(const uint32_t curr_step); static int32_t _eval_bezier_curve(const uint32_t curr_step);
#endif #endif