Update SD card connection / sharing options (#14325)

This commit is contained in:
Andy Shaw 2019-06-26 09:55:57 +01:00 committed by Scott Lahteine
parent 9f136a7c67
commit 064177154c
100 changed files with 1508 additions and 860 deletions

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -69,11 +69,3 @@
#if IS_RE_ARM_BOARD && ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && HAS_DRIVER(TMC2130) && DISABLED(TMC_USE_SW_SPI) #if IS_RE_ARM_BOARD && ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && HAS_DRIVER(TMC2130) && DISABLED(TMC_USE_SW_SPI)
#error "Re-ARM with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER and TMC2130 require TMC_USE_SW_SPI" #error "Re-ARM with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER and TMC2130 require TMC_USE_SW_SPI"
#endif #endif
#if 1 < (ENABLED(LPC_SD_CUSTOM_CABLE) + ENABLED(LPC_SD_LCD) + ENABLED(LPC_SD_ONBOARD))
#error "Enable only one of LPC_SD_CUSTOM_CABLE, LPC_SD_LCD, or LPC_SD_ONBOARD."
#endif
#if 1 < (ENABLED(USB_SD_DISABLED) + ENABLED(USB_SD_ONBOARD))
#error "Enable only one of USB_SD_DISABLED or USB_SD_ONBOARD."
#endif

View file

@ -81,8 +81,8 @@ void HAL_init() {
OUT_WRITE(SS_PIN, HIGH); OUT_WRITE(SS_PIN, HIGH);
#endif #endif
#if defined(ONBOARD_SD_CS) && ONBOARD_SD_CS > -1 #if PIN_EXISTS(ONBOARD_SD_CS) && ONBOARD_SD_CS_PIN != SS_PIN
OUT_WRITE(ONBOARD_SD_CS, HIGH); OUT_WRITE(ONBOARD_SD_CS_PIN, HIGH);
#endif #endif
USB_Init(); // USB Initialization USB_Init(); // USB Initialization
@ -90,7 +90,7 @@ void HAL_init() {
delay(1000); // Give OS time to notice delay(1000); // Give OS time to notice
USB_Connect(TRUE); USB_Connect(TRUE);
#if DISABLED(USB_SD_DISABLED) #if !BOTH(SHARED_SD_CARD, INIT_SDCARD_ON_BOOT) && DISABLED(NO_SD_HOST_DRIVE)
MSC_SD_Init(0); // Enable USB SD card access MSC_SD_Init(0); // Enable USB SD card access
#endif #endif
@ -117,7 +117,7 @@ void HAL_init() {
// HAL idle task // HAL idle task
void HAL_idletask(void) { void HAL_idletask(void) {
#if BOTH(SDSUPPORT, SHARED_SD_CARD) #if ENABLED(SHARED_SD_CARD)
// If Marlin is using the SD card we need to lock it to prevent access from // If Marlin is using the SD card we need to lock it to prevent access from
// a PC via USB. // a PC via USB.
// Other HALs use IS_SD_PRINTING() and IS_SD_FILE_OPEN() to check for access but // Other HALs use IS_SD_PRINTING() and IS_SD_FILE_OPEN() to check for access but

View file

@ -1098,7 +1098,7 @@ void setup() {
init_closedloop(); init_closedloop();
#endif #endif
#if ENABLED(SDSUPPORT) && DISABLED(ULTRA_LCD) #if ENABLED(INIT_SDCARD_ON_BOOT) && DISABLED(ULTRA_LCD)
card.beginautostart(); card.beginautostart();
#endif #endif

View file

@ -48,8 +48,8 @@
#define _TMC5160 5160 #define _TMC5160 5160
#define _TMC5160_STANDALONE 5161 #define _TMC5160_STANDALONE 5161
#define _ACTUAL(V) _CAT(_, V) #define _DRIVER_ID(V) _CAT(_, V)
#define _AXIS_DRIVER_TYPE(A,T) (defined(A##_DRIVER_TYPE) && _ACTUAL(A##_DRIVER_TYPE) == _CAT(_, T)) #define _AXIS_DRIVER_TYPE(A,T) (_DRIVER_ID(A##_DRIVER_TYPE) == _CAT(_, T))
#define AXIS_DRIVER_TYPE_X(T) _AXIS_DRIVER_TYPE(X,T) #define AXIS_DRIVER_TYPE_X(T) _AXIS_DRIVER_TYPE(X,T)
#define AXIS_DRIVER_TYPE_Y(T) _AXIS_DRIVER_TYPE(Y,T) #define AXIS_DRIVER_TYPE_Y(T) _AXIS_DRIVER_TYPE(Y,T)
@ -116,3 +116,12 @@
|| AXIS_DRIVER_TYPE(A,TMC2209) \ || AXIS_DRIVER_TYPE(A,TMC2209) \
|| AXIS_DRIVER_TYPE(A,TMC5130) \ || AXIS_DRIVER_TYPE(A,TMC5130) \
|| AXIS_DRIVER_TYPE(A,TMC5160) ) || AXIS_DRIVER_TYPE(A,TMC5160) )
//
// Stretching 'drivers.h' to include LPC SD options
//
#define _SDCARD_LCD 1
#define _SDCARD_ONBOARD 2
#define _SDCARD_CUSTOM_CABLE 3
#define _SDCARD_ID(V) _CAT(_SDCARD_, V)
#define SD_CONNECTION_IS(V) (_SDCARD_ID(SDCARD_CONNECTION) == _SDCARD_ID(V))

View file

@ -1727,3 +1727,18 @@
#define LCD_HEIGHT 2 #define LCD_HEIGHT 2
#endif #endif
#endif #endif
//
// The external SD card is not used. Hardware SPI is used to access the card.
// When sharing the SD card with a PC we want the menu options to
// mount/unmount the card and refresh it. So we disable card detect.
//
#if ENABLED(SDSUPPORT)
#if SD_CONNECTION_IS(ONBOARD) && DISABLED(NO_SD_HOST_DRIVE)
#undef SD_DETECT_PIN
#define SHARED_SD_CARD
#endif
#if DISABLED(SHARED_SD_CARD)
#define INIT_SDCARD_ON_BOOT
#endif
#endif

View file

@ -362,6 +362,12 @@
#error "MENU_ITEM_CASE_LIGHT is now CASE_LIGHT_MENU. Please update your configuration." #error "MENU_ITEM_CASE_LIGHT is now CASE_LIGHT_MENU. Please update your configuration."
#elif defined(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) #elif defined(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
#error "ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED is now SD_ABORT_ON_ENDSTOP_HIT. Please update your Configuration_adv.h." #error "ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED is now SD_ABORT_ON_ENDSTOP_HIT. Please update your Configuration_adv.h."
#elif defined(LPC_SD_LCD) || defined(LPC_SD_ONBOARD) || defined(LPC_SD_CUSTOM_CABLE)
#error "LPC_SD_(LCD|ONBOARD|CUSTOM_CABLE) are now SDCARD_CONNECTION. Please update your Configuration_adv.h."
#elif defined(USB_SD_DISABLED)
#error "USB_SD_DISABLED is now NO_SD_HOST_DRIVE. Please update your Configuration_adv.h."
#elif defined(USB_SD_ONBOARD)
#error "USB_SD_ONBOARD is obsolete. Disable NO_SD_HOST_DRIVE instead."
#endif #endif
#define BOARD_MKS_13 -47 #define BOARD_MKS_13 -47

View file

@ -104,7 +104,7 @@
#endif #endif
#endif #endif
#if ENABLED(SDSUPPORT) #if ENABLED(INIT_SDCARD_ON_BOOT)
uint8_t lcd_sd_status; uint8_t lcd_sd_status;
#endif #endif
@ -319,8 +319,10 @@ void MarlinUI::init() {
#if PIN_EXISTS(SD_DETECT) #if PIN_EXISTS(SD_DETECT)
SET_INPUT_PULLUP(SD_DETECT_PIN); SET_INPUT_PULLUP(SD_DETECT_PIN);
#endif #endif
#if ENABLED(INIT_SDCARD_ON_BOOT)
lcd_sd_status = 2; // UNKNOWN lcd_sd_status = 2; // UNKNOWN
#endif #endif
#endif
#if HAS_ENCODER_ACTION && HAS_SLOW_BUTTONS #if HAS_ENCODER_ACTION && HAS_SLOW_BUTTONS
slow_buttons = 0; slow_buttons = 0;
@ -770,7 +772,7 @@ void MarlinUI::update() {
#endif // HAS_LCD_MENU #endif // HAS_LCD_MENU
#if ENABLED(SDSUPPORT) #if ENABLED(INIT_SDCARD_ON_BOOT)
const uint8_t sd_status = (uint8_t)IS_SD_INSERTED(); const uint8_t sd_status = (uint8_t)IS_SD_INSERTED();
if (sd_status != lcd_sd_status && detected()) { if (sd_status != lcd_sd_status && detected()) {
@ -811,7 +813,7 @@ void MarlinUI::update() {
#endif #endif
} }
#endif // SDSUPPORT #endif // INIT_SDCARD_ON_BOOT
if (ELAPSED(ms, next_lcd_update_ms) if (ELAPSED(ms, next_lcd_update_ms)
#if HAS_GRAPHICAL_LCD #if HAS_GRAPHICAL_LCD

View file

@ -86,7 +86,7 @@
#define FAN1_PIN P0_26 #define FAN1_PIN P0_26
#define LCD_SDSS P0_16 // LCD SD chip select #define LCD_SDSS P0_16 // LCD SD chip select
#define ONBOARD_SD_CS P0_06 // On board SD chip select #define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if ENABLED(AZSMZ_12864) #if ENABLED(AZSMZ_12864)
#define BEEPER_PIN P1_30 #define BEEPER_PIN P1_30
@ -95,28 +95,24 @@
#define BTN_EN1 P4_28 #define BTN_EN1 P4_28
#define BTN_EN2 P1_27 #define BTN_EN2 P1_27
#define BTN_ENC P3_26 #define BTN_ENC P3_26
#if DISABLED(LPC_SD_ONBOARD) #ifndef SDCARD_CONNECTION
#define LPC_SD_LCD #define SDCARD_CONNECTION LCD
#endif #endif
#endif #endif
#if ENABLED(LPC_SD_LCD) #if SD_CONNECTION_IS(LCD)
#define SCK_PIN P0_15 #define SCK_PIN P0_15
#define MISO_PIN P0_17 #define MISO_PIN P0_17
#define MOSI_PIN P0_18 #define MOSI_PIN P0_18
#define SS_PIN LCD_SDSS #define SS_PIN LCD_SDSS
#define SD_DETECT_PIN P3_25 #define SD_DETECT_PIN P3_25
#elif ENABLED(LPC_SD_ONBOARD) #elif SD_CONNECTION_IS(ONBOARD)
#if ENABLED(USB_SD_ONBOARD)
// When sharing the SD card with a PC we want the menu options to
// mount/unmount the card and refresh it. So we disable card detect.
#define SHARED_SD_CARD
#undef SD_DETECT_PIN
#endif
#define SCK_PIN P0_07 #define SCK_PIN P0_07
#define MISO_PIN P0_08 #define MISO_PIN P0_08
#define MOSI_PIN P0_09 #define MOSI_PIN P0_09
#define SS_PIN ONBOARD_SD_CS #define SS_PIN ONBOARD_SD_CS_PIN
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board."
#endif #endif
// //

View file

@ -189,30 +189,23 @@
// //
// SD Support // SD Support
// //
#if !ANY(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE) #ifndef SDCARD_CONNECTION
#define LPC_SD_ONBOARD #define SDCARD_CONNECTION ONBOARD
#endif #endif
#if ENABLED(LPC_SD_LCD) #define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if SD_CONNECTION_IS(LCD)
#define SCK_PIN P0_15 #define SCK_PIN P0_15
#define MISO_PIN P0_17 #define MISO_PIN P0_17
#define MOSI_PIN P0_18 #define MOSI_PIN P0_18
#define SS_PIN P1_23 // Chip select for SD card used by Marlin #define SS_PIN P1_23
#define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card #elif SD_CONNECTION_IS(ONBOARD)
#undef SD_DETECT_PIN
#elif ENABLED(LPC_SD_ONBOARD)
#if ENABLED(USB_SD_ONBOARD)
// When sharing the SD card with a PC we want the menu options to
// mount/unmount the card and refresh it. So we disable card detect.
#define SHARED_SD_CARD
#undef SD_DETECT_PIN // there is also no detect pin for the onboard card
#endif
#define SCK_PIN P0_07 #define SCK_PIN P0_07
#define MISO_PIN P0_08 #define MISO_PIN P0_08
#define MOSI_PIN P0_09 #define MOSI_PIN P0_09
#define SS_PIN P0_06 // Chip select for SD card used by Marlin #define SS_PIN ONBOARD_SD_CS_PIN
#define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card #elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board."
#endif #endif

View file

@ -255,39 +255,29 @@
// SD Support // SD Support
// //
#if !ANY(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE) #ifndef SDCARD_CONNECTION
#undef USB_SD_DISABLED #define SDCARD_CONNECTION LCD
#define USB_SD_ONBOARD
#define LPC_SD_LCD
#endif #endif
#if ENABLED(LPC_SD_LCD) #define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if SD_CONNECTION_IS(LCD)
#define SCK_PIN P0_15 #define SCK_PIN P0_15
#define MISO_PIN P0_17 #define MISO_PIN P0_17
#define MOSI_PIN P0_18 #define MOSI_PIN P0_18
#define SS_PIN P0_16 // Chip select for SD card used by Marlin #define SS_PIN P0_16
#define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card #elif SD_CONNECTION_IS(ONBOARD)
#elif ENABLED(LPC_SD_ONBOARD)
#if ENABLED(USB_SD_ONBOARD)
// When sharing the SD card with a PC we want the menu options to
// mount/unmount the card and refresh it. So we disable card detect.
#define SHARED_SD_CARD
#undef SD_DETECT_PIN #undef SD_DETECT_PIN
//#define SD_DETECT_PIN P0_27 // (57) open-drain #define SD_DETECT_PIN P0_27
#endif
#define SCK_PIN P0_07 #define SCK_PIN P0_07
#define MISO_PIN P0_08 #define MISO_PIN P0_08
#define MOSI_PIN P0_09 #define MOSI_PIN P0_09
#define SS_PIN P0_06 // Chip select for SD card used by Marlin #define SS_PIN ONBOARD_SD_CS_PIN
#define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card #elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board."
#endif #endif
/** /**
* Special pins * Special pins
* P1_30 (37) (NOT 5V tolerant) * P1_30 (37) (NOT 5V tolerant)
* P1_31 (49) (NOT 5V tolerant) * P1_31 (49) (NOT 5V tolerant)

View file

@ -118,39 +118,30 @@
// MKS_MINI_12864 strongly prefers the SD card on the display and // MKS_MINI_12864 strongly prefers the SD card on the display and
// requires jumpers on the SKR V1.1 board as documented here: // requires jumpers on the SKR V1.1 board as documented here:
// https://www.facebook.com/groups/505736576548648/permalink/630639874058317/ // https://www.facebook.com/groups/505736576548648/permalink/630639874058317/
#if !ANY(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE) #ifndef SDCARD_CONNECTION
#if ENABLED(MKS_MINI_12864) #if ENABLED(MKS_MINI_12864)
#define LPC_SD_LCD #define SDCARD_CONNECTION LCD
#undef USB_SD_DISABLED
#define USB_SD_ONBOARD
#else #else
#define USB_SD_ONBOARD #define SDCARD_CONNECTION ONBOARD
#define LPC_SD_ONBOARD
#endif #endif
#endif #endif
#if ENABLED(LPC_SD_LCD) #define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if SD_CONNECTION_IS(LCD)
#define SCK_PIN P0_15 #define SCK_PIN P0_15
#define MISO_PIN P0_17 #define MISO_PIN P0_17
#define MOSI_PIN P0_18 #define MOSI_PIN P0_18
#define SS_PIN P1_23 // Chip select for SD card used by Marlin #define SS_PIN P1_23
#define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card #elif SD_CONNECTION_IS(ONBOARD)
#undef SD_DETECT_PIN
#elif ENABLED(LPC_SD_ONBOARD) #define SD_DETECT_PIN P0_27
#if ENABLED(USB_SD_ONBOARD)
// When sharing the SD card with a PC we want the menu options to
// mount/unmount the card and refresh it. So we disable card detect.
#define SHARED_SD_CARD
#undef SD_DETECT_PIN // there is also no detect pin for the onboard card
#endif
#define SCK_PIN P0_07 #define SCK_PIN P0_07
#define MISO_PIN P0_08 #define MISO_PIN P0_08
#define MOSI_PIN P0_09 #define MOSI_PIN P0_09
#define SS_PIN P0_06 // Chip select for SD card used by Marlin #define SS_PIN ONBOARD_SD_CS_PIN
#define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card #elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board."
#endif #endif
// Trinamic driver support // Trinamic driver support
@ -232,11 +223,11 @@
// EXAMPLES // EXAMPLES
// Example 1: No LCD attached or a TFT style display using the AUX header RX/TX pins. // Example 1: No LCD attached or a TFT style display using the AUX header RX/TX pins.
// LPC_SD_LCD must not be enabled. Nothing should be connected to EXP1/EXP2. // SDCARD_CONNECTION must not be 'LCD'. Nothing should be connected to EXP1/EXP2.
//#define SKR_USE_LCD_PINS_FOR_CS //#define SKR_USE_LCD_PINS_FOR_CS
#if ENABLED(SKR_USE_LCD_PINS_FOR_CS) #if ENABLED(SKR_USE_LCD_PINS_FOR_CS)
#if ENABLED(LPC_SD_LCD) #if SD_CONNECTION_IS(LCD)
#error "LPC_SD_LCD must not be enabled with SKR_USE_LCD_PINS_FOR_CS." #error "SDCARD_CONNECTION must not be 'LCD' with SKR_USE_LCD_PINS_FOR_CS."
#endif #endif
#define X_CS_PIN P1_23 #define X_CS_PIN P1_23
#define Y_CS_PIN P3_26 #define Y_CS_PIN P3_26
@ -247,11 +238,11 @@
// Example 2: A REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // Example 2: A REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
// The SD card reader attached to the LCD (if present) can't be used because // The SD card reader attached to the LCD (if present) can't be used because
// the pins will be in use. So LPC_SD_LCD must not be defined. // the pins will be in use. So SDCARD_CONNECTION must not be 'LCD'.
//#define SKR_USE_LCD_SD_CARD_PINS_FOR_CS //#define SKR_USE_LCD_SD_CARD_PINS_FOR_CS
#if ENABLED(SKR_USE_LCD_SD_CARD_PINS_FOR_CS) #if ENABLED(SKR_USE_LCD_SD_CARD_PINS_FOR_CS)
#if ENABLED(LPC_SD_LCD) #if SD_CONNECTION_IS(LCD)
#error "LPC_SD_LCD must not be enabled with SKR_USE_LCD_SD_CARD_PINS_FOR_CS." #error "SDCARD_CONNECTION must not be 'LCD' with SKR_USE_LCD_SD_CARD_PINS_FOR_CS."
#endif #endif
#define X_CS_PIN P0_02 #define X_CS_PIN P0_02
#define Y_CS_PIN P0_03 #define Y_CS_PIN P0_03

View file

@ -213,35 +213,25 @@
// //
// SD Support // SD Support
// //
#if NONE(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE) #ifndef SDCARD_CONNECTION
#undef USB_SD_DISABLED #define SDCARD_CONNECTION ONBOARD
#define USB_SD_ONBOARD
#define LPC_SD_ONBOARD
#endif #endif
#if ENABLED(LPC_SD_LCD) #define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if SD_CONNECTION_IS(LCD)
#define SCK_PIN P0_07 // (52) system defined J3-9 & AUX-3 #define SCK_PIN P0_07 // (52) system defined J3-9 & AUX-3
#define MISO_PIN P0_08 // (50) system defined J3-10 & AUX-3 #define MISO_PIN P0_08 // (50) system defined J3-10 & AUX-3
#define MOSI_PIN P0_09 // (51) system defined J3-10 & AUX-3 #define MOSI_PIN P0_09 // (51) system defined J3-10 & AUX-3
#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS) - CS used by Marlin #define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS) - CS used by Marlin
#define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card #elif SD_CONNECTION_IS(ONBOARD)
#undef SD_DETECT_PIN
#elif ENABLED(LPC_SD_ONBOARD)
#if ENABLED(USB_SD_ONBOARD)
// When sharing the SD card with a PC the LCD menu options are
// needed to mount/unmount and refresh SD. So disable SD detect.
#define SHARED_SD_CARD
#undef SD_DETECT_PIN // No SD detect pin for the onboard card
#endif
#define SCK_PIN P0_07 #define SCK_PIN P0_07
#define MISO_PIN P0_08 #define MISO_PIN P0_08
#define MOSI_PIN P0_09 #define MOSI_PIN P0_09
#define SS_PIN P0_06 // Chip select for SD card used by Marlin #define SS_PIN ONBOARD_SD_CS_PIN
#define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card #elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board."
#endif #endif
// //

View file

@ -158,13 +158,13 @@
#define ENET_TXD0 P1_00 // J12-11 #define ENET_TXD0 P1_00 // J12-11
#define ENET_TXD1 P1_01 // J12-12 #define ENET_TXD1 P1_01 // J12-12
#if !ANY(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE) #ifndef SDARD_CONNECTION
#undef USB_SD_DISABLED #define SDCARD_CONNECTION ONBOARD
#define USB_SD_ONBOARD
#define LPC_SD_ONBOARD
#endif #endif
#if ENABLED(LPC_SD_CUSTOM_CABLE) #define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if SD_CONNECTION_IS(CUSTOM_CABLE)
/** /**
* A custom cable is needed. See the README file in the * A custom cable is needed. See the README file in the
@ -182,37 +182,23 @@
#define SCK_PIN P1_22 // J8-2 (moved from EXP2 P0.7) #define SCK_PIN P1_22 // J8-2 (moved from EXP2 P0.7)
#define MISO_PIN P1_23 // J8-3 (moved from EXP2 P0.8) #define MISO_PIN P1_23 // J8-3 (moved from EXP2 P0.8)
#define MOSI_PIN P2_12 // J8-4 (moved from EXP2 P0.9) #define MOSI_PIN P2_12 // J8-4 (moved from EXP2 P0.9)
#define SS_PIN P0_28 // Chip select for SD card used by Marlin #define SS_PIN P0_28
#define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card
#define LPC_SOFTWARE_SPI // With a custom cable we need software SPI because the #define LPC_SOFTWARE_SPI // With a custom cable we need software SPI because the
// selected pins are not on a hardware SPI controller // selected pins are not on a hardware SPI controller
#elif ENABLED(LPC_SD_LCD) #elif SD_CONNECTION_IS(LCD)
// use standard cable and header, SPI and SD detect sre shared with on-board SD card // use standard cable and header, SPI and SD detect sre shared with on-board SD card
// hardware SPI is used for both SD cards. The detect pin is shred between the // hardware SPI is used for both SD cards. The detect pin is shred between the
// LCD and onboard SD readers so we disable it. // LCD and onboard SD readers so we disable it.
#define SCK_PIN P0_07 #define SCK_PIN P0_07
#define MISO_PIN P0_08 #define MISO_PIN P0_08
#define MOSI_PIN P0_09 #define MOSI_PIN P0_09
#define SS_PIN P0_28 // Chip select for SD card used by Marlin #define SS_PIN P0_28
#define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card #elif SD_CONNECTION_IS(ONBOARD)
#elif ENABLED(LPC_SD_ONBOARD)
// The external SD card is not used. Hardware SPI is used to access the card.
#if ENABLED(USB_SD_ONBOARD)
// When sharing the SD card with a PC we want the menu options to
// mount/unmount the card and refresh it. So we disable card detect.
#define SHARED_SD_CARD
#else
#define SD_DETECT_PIN P0_27 #define SD_DETECT_PIN P0_27
#endif
#define SCK_PIN P0_07 #define SCK_PIN P0_07
#define MISO_PIN P0_08 #define MISO_PIN P0_08
#define MOSI_PIN P0_09 #define MOSI_PIN P0_09
#define SS_PIN P0_06 // Chip select for SD card used by Marlin #define SS_PIN ONBOARD_SD_CS_PIN
#define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card
#endif #endif
/** /**

View file

@ -413,35 +413,25 @@
// //
// SD Support // SD Support
// //
#if !ANY(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE) #ifndef SDCARD_CONNECTION
#undef USB_SD_DISABLED #define SDCARD_CONNECTION ONBOARD
#define USB_SD_ONBOARD
#define LPC_SD_ONBOARD
#endif #endif
#if ENABLED(LPC_SD_LCD) #define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if SD_CONNECTION_IS(LCD)
#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3 #define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3
#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3 #define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3
#define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3 #define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3
#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS) - CS used by Marlin #define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS) - CS used by Marlin
#define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card #elif SD_CONNECTION_IS(ONBOARD)
#undef SD_DETECT_PIN
#elif ENABLED(LPC_SD_ONBOARD)
#if ENABLED(USB_SD_ONBOARD)
// When sharing the SD card with a PC we want the menu options to
// mount/unmount the card and refresh it. So we disable card detect.
#define SHARED_SD_CARD
#undef SD_DETECT_PIN // there is also no detect pin for the onboard card
#endif
#define SCK_PIN P0_07 #define SCK_PIN P0_07
#define MISO_PIN P0_08 #define MISO_PIN P0_08
#define MOSI_PIN P0_09 #define MOSI_PIN P0_09
#define SS_PIN P0_06 // Chip select for SD card used by Marlin #define SS_PIN ONBOARD_SD_CS_PIN
#define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card #elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board."
#endif #endif
/** /**

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1038,19 +1038,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1042,19 +1042,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1033,19 +1033,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1038,19 +1038,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1038,19 +1038,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1039,19 +1039,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1039,19 +1039,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1035,19 +1035,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1030,19 +1030,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader may be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1047,19 +1047,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1036,19 +1036,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1036,19 +1036,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1036,19 +1036,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1036,19 +1036,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1036,19 +1036,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1036,19 +1036,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1036,19 +1036,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1036,19 +1036,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1036,19 +1036,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1036,19 +1036,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1036,19 +1036,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *

View file

@ -1035,19 +1035,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller. /**
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) * Set this option to one of the following (or the board's defaults apply):
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file). *
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security). * LCD - Use the SD drive in the external LCD controller.
#if ENABLED(LPC_SD_ONBOARD) * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
#endif *
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
//#define SDCARD_CONNECTION LCD
#endif #endif
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* By default an onboard SD card reader will be shared as a USB mass-
* storage device. This option hides the SD card from the host PC.
*/
//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
/** /**
* Additional options for Graphical Displays * Additional options for Graphical Displays
* *