From 08bc723a3c229a541922830f59877777b466ecce Mon Sep 17 00:00:00 2001 From: chrono Date: Mon, 2 Mar 2015 10:26:42 +0000 Subject: [PATCH] Enable PIDBED --- .../Felix/Configuration.h | 27 +++++++------------ 1 file changed, 10 insertions(+), 17 deletions(-) diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h index 12240a301..959bf2d09 100644 --- a/Marlin/example_configurations/Felix/Configuration.h +++ b/Marlin/example_configurations/Felix/Configuration.h @@ -70,7 +70,7 @@ Here are some standard links for getting your machine calibrated: // #define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // This defines the number of extruders -#define EXTRUDERS 2 +#define EXTRUDERS 1 //// The following define selects which power supply you have. Please choose the one that matches your setup // 1 = ATX @@ -205,7 +205,7 @@ Here are some standard links for getting your machine calibrated: // If your configuration is significantly different than this and you don't understand the issues involved, you probably // shouldn't use bed PID until someone else verifies your hardware works. // If this is enabled, find your own PID constants below. -//#define PIDTEMPBED +#define PIDTEMPBED // //#define BED_LIMIT_SWITCHING @@ -216,17 +216,10 @@ Here are some standard links for getting your machine calibrated: #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #ifdef PIDTEMPBED -//120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) -//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - -//120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) -//from pidautotune -// #define DEFAULT_bedKp 97.1 -// #define DEFAULT_bedKi 1.41 -// #define DEFAULT_bedKd 1675.16 +// Felix Foil Heater + #define DEFAULT_bedKp 103.37 + #define DEFAULT_bedKi 2.79 + #define DEFAULT_bedKd 956.94 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -270,15 +263,15 @@ your extruder heater takes 2 minutes to hit the target on heating. // uncomment the 2 defines below: // Parameters for all extruder heaters -//#define THERMAL_RUNAWAY_PROTECTION_PERIOD 40 //in seconds -//#define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS 4 // in degree Celsius +#define THERMAL_RUNAWAY_PROTECTION_PERIOD 60 //in seconds +#define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS 5 // in degree Celsius // If you want to enable this feature for your bed heater, // uncomment the 2 defines below: // Parameters for the bed heater -//#define THERMAL_RUNAWAY_PROTECTION_BED_PERIOD 20 //in seconds -//#define THERMAL_RUNAWAY_PROTECTION_BED_HYSTERESIS 2 // in degree Celsius +#define THERMAL_RUNAWAY_PROTECTION_BED_PERIOD 30 //in seconds +#define THERMAL_RUNAWAY_PROTECTION_BED_HYSTERESIS 5// in degree Celsius //===========================================================================