From 094afe7c1065d5663628b389f27687a5f465abb8 Mon Sep 17 00:00:00 2001 From: Erik van der Zalm Date: Fri, 4 Nov 2011 18:02:56 +0100 Subject: [PATCH] Merged Marlin, Marlin non gen6 and Ultimaker changes --- Marlin/Configuration.h | 147 ++- Marlin/EEPROM.h | 123 +++ Marlin/Makefile | 451 +++++----- Marlin/Marlin.h | 86 +- Marlin/Marlin.pde | 1718 +++++++++--------------------------- Marlin/fastio.h | 1 + Marlin/lcd.h | 10 + Marlin/lcd.pde | 1 + Marlin/pins.h | 96 +- Marlin/planner.cpp | 584 ++++++++++++ Marlin/planner.h | 90 ++ Marlin/speed_lookuptable.h | 8 +- Marlin/stepper.cpp | 592 +++++++++++++ Marlin/stepper.h | 40 + Marlin/streaming.h | 84 ++ Marlin/temperature.cpp | 476 ++++++++++ Marlin/temperature.h | 55 ++ Marlin/thermistortables.h | 221 ++--- Marlin/ultralcd.h | 156 ++++ Marlin/ultralcd.pde | 1593 +++++++++++++++++++++++++++++++++ Marlin/wiring.c | 176 ---- Marlin/wiring_serial.c | 139 --- 22 files changed, 4803 insertions(+), 2044 deletions(-) create mode 100644 Marlin/EEPROM.h create mode 100644 Marlin/lcd.h create mode 100644 Marlin/lcd.pde create mode 100644 Marlin/planner.cpp create mode 100644 Marlin/planner.h create mode 100644 Marlin/stepper.cpp create mode 100644 Marlin/stepper.h create mode 100644 Marlin/streaming.h create mode 100644 Marlin/temperature.cpp create mode 100644 Marlin/temperature.h create mode 100644 Marlin/ultralcd.h create mode 100644 Marlin/ultralcd.pde delete mode 100644 Marlin/wiring.c delete mode 100644 Marlin/wiring_serial.c diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 39480939d..2cef365b0 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -1,38 +1,70 @@ #ifndef CONFIGURATION_H #define CONFIGURATION_H +//#define DEBUG_STEPS + // BASIC SETTINGS: select your board type, thermistor type, axis scaling, and endstop configuration //// The following define selects which electronics board you have. Please choose the one that matches your setup -// Gen6 = 5, -#define MOTHERBOARD 5 +// MEGA/RAMPS up to 1.2 = 3, +// RAMPS 1.3 = 33 +// Gen6 = 5, +// Sanguinololu 1.2 and above = 62 +// Ultimaker = 7, +#define MOTHERBOARD 7 +//#define MOTHERBOARD 5 //// Thermistor settings: // 1 is 100k thermistor // 2 is 200k thermistor // 3 is mendel-parts thermistor #define THERMISTORHEATER 3 +// Select one of these only to define how the nozzle temp is read. +//#define HEATER_USES_THERMISTOR +#define HEATER_USES_AD595 +// Select one of these only to define how the bed temp is read. +//#define BED_USES_THERMISTOR +//#define BED_USES_AD595 + +#define HEATER_CHECK_INTERVAL 50 +#define BED_CHECK_INTERVAL 5000 +#define BNUMTEMPS NUMTEMPS +#define bedtemptable temptable -//// Calibration variables -// X, Y, Z, E steps per unit - Metric Mendel / Orca with V9 extruder: -float axis_steps_per_unit[] = {40, 40, 3333.92, 67}; -// For E steps per unit = 67 for v9 with direct drive (needs finetuning) for other extruders this needs to be changed -// Metric Prusa Mendel with Makergear geared stepper extruder: -//float axis_steps_per_unit[] = {80,80,3200/1.25,1380}; //// Endstop Settings #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors // The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins. -const bool ENDSTOPS_INVERTING = false; // set to true to invert the logic of the endstops. +const bool ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops. // For optos H21LOB set to true, for Mendel-Parts newer optos TCST2103 set to false // This determines the communication speed of the printer -#define BAUDRATE 250000 +//#define BAUDRATE 250000 +#define BAUDRATE 115200 +//#define BAUDRATE 230400 // Comment out (using // at the start of the line) to disable SD support: -//#define SDSUPPORT +// #define ULTRA_LCD //any lcd +#define LCD_WIDTH 16 +#define LCD_HEIGHT 2 + +#define ULTIPANEL +#ifdef ULTIPANEL + //#define NEWPANEL //enable this if you have a click-encoder panel + #define SDSUPPORT + #define ULTRA_LCD + #define LCD_WIDTH 20 +#define LCD_HEIGHT 4 +#endif + + +//#define SDSUPPORT // Enable SD Card Support in Hardware Console + + + +const int dropsegments=5; //everything with this number of steps will be ignored as move //// ADVANCED SETTINGS - to tweak parameters @@ -47,14 +79,14 @@ const bool ENDSTOPS_INVERTING = false; // set to true to invert the logic of the // Disables axis when it's not being used. #define DISABLE_X false #define DISABLE_Y false -#define DISABLE_Z true +#define DISABLE_Z false #define DISABLE_E false // Inverting axis direction #define INVERT_X_DIR true // for Mendel set to false, for Orca set to true #define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false #define INVERT_Z_DIR true // for Mendel set to false, for Orca set to true -#define INVERT_E_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false +#define INVERT_E_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false //// ENDSTOP SETTINGS: // Sets direction of endstops when homing; 1=MAX, -1=MIN @@ -63,51 +95,81 @@ const bool ENDSTOPS_INVERTING = false; // set to true to invert the logic of the #define Z_HOME_DIR -1 #define min_software_endstops false //If true, axis won't move to coordinates less than zero. -#define max_software_endstops true //If true, axis won't move to coordinates greater than the defined lengths below. -#define X_MAX_LENGTH 200 -#define Y_MAX_LENGTH 200 -#define Z_MAX_LENGTH 100 +#define max_software_endstops false //If true, axis won't move to coordinates greater than the defined lengths below. +#define X_MAX_LENGTH 210 +#define Y_MAX_LENGTH 210 +#define Z_MAX_LENGTH 210 //// MOVEMENT SETTINGS #define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E -float max_feedrate[] = {60000, 60000, 100, 500000}; // set the max speeds -float homing_feedrate[] = {2400, 2400, 80, 0}; // set the homing speeds -bool axis_relative_modes[] = {false, false, false, false}; +//note: on bernhards ultimaker 200 200 12 are working well. +#define HOMING_FEEDRATE {50*60, 50*60, 12*60, 0} // set the homing speeds +//the followint checks if an extrusion is existent in the move. if _not_, the speed of the move is set to the maximum speed. +//!!!!!!Use only if you know that your printer works at the maximum declared speeds. +// works around the skeinforge cool-bug. There all moves are slowed to have a minimum layer time. However slow travel moves= ooze +#define TRAVELING_AT_MAXSPEED +#define AXIS_RELATIVE_MODES {false, false, false, false} + +#define MAX_STEP_FREQUENCY 40000 // Max step frequency for Ultimaker (5000 pps / half step) + +// default settings + +#define DEFAULT_AXIS_STEPS_PER_UNIT {79.87220447,79.87220447,200*8/3,14} // default steps per unit for ultimaker +#define DEFAULT_MAX_FEEDRATE {160*60, 160*60, 10*60, 500000} +#define DEFAULT_MAX_ACCELERATION {9000,9000,150,10000} // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for skeinforge 40+, for older versions raise them a lot. + +#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E max acceleration in mm/s^2 for printing moves +#define DEFAULT_RETRACT_ACCELERATION 7000 // X, Y, Z and E max acceleration in mm/s^2 for r retracts + +#define DEFAULT_MINIMUMFEEDRATE 10 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 10 + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. Increase this number if you see blobs while printing high speed & high detail. It will slowdown on the detailed stuff. +#define DEFAULT_MINSEGMENTTIME 20000 +#define DEFAULT_XYJERK 30.0*60 +#define DEFAULT_ZJERK 10.0*60 -//// Acceleration settings -// X, Y, Z, E maximum start speed for accelerated moves. E default values are good for skeinforge 40+, for older versions raise them a lot. -float acceleration = 2000; // Normal acceleration mm/s^2 -float retract_acceleration = 7000; // Normal acceleration mm/s^2 -float max_xy_jerk = 20.0*60; -float max_z_jerk = 0.4*60; -long max_acceleration_units_per_sq_second[] = {7000,7000,100,10000}; // X, Y, Z and E max acceleration in mm/s^2 for printing moves or retracts // The watchdog waits for the watchperiod in milliseconds whenever an M104 or M109 increases the target temperature +//this enables the watchdog interrupt. +#define USE_WATCHDOG +//you cannot reboot on a mega2560 due to a bug in he bootloader. Hence, you have to reset manually, and this is done hereby: +#define RESET_MANUAL + +#define WATCHDOG_TIMEOUT 4 + + // If the temperature has not increased at the end of that period, the target temperature is set to zero. It can be reset with another M104/M109 //#define WATCHPERIOD 5000 //5 seconds //// The minimal temperature defines the temperature below which the heater will not be enabled #define MINTEMP 5 +#define BED_MINTEMP 5 // When temperature exceeds max temp, your heater will be switched off. // This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! // You should use MINTEMP for thermistor short/failure protection. #define MAXTEMP 275 - +#define BED_MAXTEMP 150 /// PID settings: // Uncomment the following line to enable PID support. -//#define PIDTEMP +//#define SMOOTHING +//#define SMOOTHFACTOR 5.0 +//float current_raw_average=0; + +#define PIDTEMP #ifdef PIDTEMP -//#define PID_DEBUG 1 // Sends debug data to the serial port. +//#define PID_DEBUG // Sends debug data to the serial port. //#define PID_OPENLOOP 1 // Puts PID in open loop. M104 sets the output power in % -#define PID_MAX 156 // limits current to nozzle -#define PID_INTEGRAL_DRIVE_MAX 156.0 -#define PID_dT 0.16 -double Kp = 20.0; -double Ki = 1.5*PID_dT; -double Kd = 80/PID_dT; +#define PID_MAX 255 // limits current to nozzle +#define PID_INTEGRAL_DRIVE_MAX 255 +#define PID_dT 0.10 // 100ms sample time +#define DEFAULT_Kp 20.0 +#define DEFAULT_Ki 1.5*PID_dT +#define DEFAULT_Kd 80/PID_dT +#define DEFAULT_Kc 0 #endif // PIDTEMP @@ -121,7 +183,7 @@ double Kd = 80/PID_dT; //#define ADVANCE #ifdef ADVANCE -#define EXTRUDER_ADVANCE_K 0.02 +#define EXTRUDER_ADVANCE_K .3 #define D_FILAMENT 1.7 #define STEPS_MM_E 65 @@ -130,4 +192,15 @@ double Kd = 80/PID_dT; #endif // ADVANCE +#if defined SDSUPPORT +// The number of linear motions that can be in the plan at any give time. + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +#ifdef SIMPLE_LCD + #define BLOCK_BUFFER_SIZE 16 // A little less buffer for just a simple LCD +#endif + #endif diff --git a/Marlin/EEPROM.h b/Marlin/EEPROM.h new file mode 100644 index 000000000..0390d94e4 --- /dev/null +++ b/Marlin/EEPROM.h @@ -0,0 +1,123 @@ + +#include "planner.h" +#include "temperature.h" + +//====================================================================================== +template int EEPROM_writeAnything(int &ee, const T& value) +{ + const byte* p = (const byte*)(const void*)&value; + int i; + for (i = 0; i < sizeof(value); i++) + EEPROM.write(ee++, *p++); + return i; +} +//====================================================================================== +template int EEPROM_readAnything(int &ee, T& value) +{ + byte* p = (byte*)(void*)&value; + int i; + for (i = 0; i < sizeof(value); i++) + *p++ = EEPROM.read(ee++); + return i; +} +//====================================================================================== + +#define EEPROM_OFFSET 100 + +#define EEPROM_VERSION "V04" // IMPORTANT: Whenever there are changes made to the variables stored in EEPROM + // in the functions below, also increment the version number. This makes sure that + // the default values are used whenever there is a change to the data, to prevent + // wrong data being written to the variables. + // ALSO: always make sure the variables in the Store and retrieve sections are in the same order. +void StoreSettings() { + char ver[4]= "000"; + int i=EEPROM_OFFSET; + EEPROM_writeAnything(i,ver); // invalidate data first + EEPROM_writeAnything(i,axis_steps_per_unit); + EEPROM_writeAnything(i,max_feedrate); + EEPROM_writeAnything(i,max_acceleration_units_per_sq_second); + EEPROM_writeAnything(i,acceleration); + EEPROM_writeAnything(i,retract_acceleration); + EEPROM_writeAnything(i,minimumfeedrate); + EEPROM_writeAnything(i,mintravelfeedrate); + EEPROM_writeAnything(i,minsegmenttime); + EEPROM_writeAnything(i,max_xy_jerk); + EEPROM_writeAnything(i,max_z_jerk); + #ifdef PIDTEMP + EEPROM_writeAnything(i,Kp); + EEPROM_writeAnything(i,Ki); + EEPROM_writeAnything(i,Kd); +#else + EEPROM_writeAnything(i,3000); + EEPROM_writeAnything(i,0); + EEPROM_writeAnything(i,0); +#endif + char ver2[4]=EEPROM_VERSION; + i=EEPROM_OFFSET; + EEPROM_writeAnything(i,ver2); // validate data + ECHOLN("Settings Stored"); + +} + +void RetrieveSettings(bool def=false){ // if def=true, the default values will be used + int i=EEPROM_OFFSET; + char stored_ver[4]; + char ver[4]=EEPROM_VERSION; + EEPROM_readAnything(i,stored_ver); //read stored version +// ECHOLN("Version: [" << ver << "] Stored version: [" << stored_ver << "]"); + if ((!def)&&(strncmp(ver,stored_ver,3)==0)) { // version number match + EEPROM_readAnything(i,axis_steps_per_unit); + EEPROM_readAnything(i,max_feedrate); + EEPROM_readAnything(i,max_acceleration_units_per_sq_second); + EEPROM_readAnything(i,acceleration); + EEPROM_readAnything(i,retract_acceleration); + EEPROM_readAnything(i,minimumfeedrate); + EEPROM_readAnything(i,mintravelfeedrate); + EEPROM_readAnything(i,minsegmenttime); + EEPROM_readAnything(i,max_xy_jerk); + EEPROM_readAnything(i,max_z_jerk); +#ifndef PIDTEMP + float Kp,Ki,Kd; +#endif + EEPROM_readAnything(i,Kp); + EEPROM_readAnything(i,Ki); + EEPROM_readAnything(i,Kd); + + ECHOLN("Stored settings retreived:"); + } + else { + float tmp1[]=DEFAULT_AXIS_STEPS_PER_UNIT; + float tmp2[]=DEFAULT_MAX_FEEDRATE; + long tmp3[]=DEFAULT_MAX_ACCELERATION; + for (int i=0;i<4;i++) { + axis_steps_per_unit[i]=tmp1[i]; + max_feedrate[i]=tmp2[i]; + max_acceleration_units_per_sq_second[i]=tmp3[i]; + } + acceleration=DEFAULT_ACCELERATION; + retract_acceleration=DEFAULT_RETRACT_ACCELERATION; + minimumfeedrate=DEFAULT_MINIMUMFEEDRATE; + minsegmenttime=DEFAULT_MINSEGMENTTIME; + mintravelfeedrate=DEFAULT_MINTRAVELFEEDRATE; + max_xy_jerk=DEFAULT_XYJERK; + max_z_jerk=DEFAULT_ZJERK; + ECHOLN("Using Default settings:"); + } + ECHOLN("Steps per unit:"); + ECHOLN(" M92 X" <<_FLOAT(axis_steps_per_unit[0],3) << " Y" << _FLOAT(axis_steps_per_unit[1],3) << " Z" << _FLOAT(axis_steps_per_unit[2],3) << " E" << _FLOAT(axis_steps_per_unit[3],3)); + ECHOLN("Maximum feedrates (mm/s):"); + ECHOLN(" M203 X" <<_FLOAT(max_feedrate[0]/60,2)<<" Y" << _FLOAT(max_feedrate[1]/60,2) << " Z" << _FLOAT(max_feedrate[2]/60,2) << " E" << _FLOAT(max_feedrate[3]/60,2)); + ECHOLN("Maximum Acceleration (mm/s2):"); + ECHOLN(" M201 X" <<_FLOAT(max_acceleration_units_per_sq_second[0],0) << " Y" << _FLOAT(max_acceleration_units_per_sq_second[1],0) << " Z" << _FLOAT(max_acceleration_units_per_sq_second[2],0) << " E" << _FLOAT(max_acceleration_units_per_sq_second[3],0)); + ECHOLN("Acceleration: S=acceleration, T=retract acceleration"); + ECHOLN(" M204 S" <<_FLOAT(acceleration,2) << " T" << _FLOAT(retract_acceleration,2)); + ECHOLN("Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum xY jerk (mm/s), Z=maximum Z jerk (mm/s)"); + ECHOLN(" M205 S" <<_FLOAT(minimumfeedrate/60,2) << " T" << _FLOAT(mintravelfeedrate/60,2) << " B" << _FLOAT(minsegmenttime,2) << " X" << _FLOAT(max_xy_jerk/60,2) << " Z" << _FLOAT(max_z_jerk/60,2)); +#ifdef PIDTEMP + ECHOLN("PID settings:"); + ECHOLN(" M301 P" << _FLOAT(Kp,3) << " I" << _FLOAT(Ki,3) << " D" << _FLOAT(Kd,3)); +#endif + +} + + diff --git a/Marlin/Makefile b/Marlin/Makefile index 06e643d4a..6fafba13b 100644 --- a/Marlin/Makefile +++ b/Marlin/Makefile @@ -1,247 +1,274 @@ -# Marlin Arduino Project Makefile -# -# Makefile Based on: -# Arduino 0011 Makefile -# Arduino adaptation by mellis, eighthave, oli.keller # -# This has been tested with Arduino 0022. -# -# This makefile allows you to build sketches from the command line -# without the Arduino environment (or Java). +# Arduino 0022 Makefile +# Uno with DOGS102 Shield # -# Detailed instructions for using the makefile: +# written by olikraus@gmail.com # -# 1. Modify the line containg "INSTALL_DIR" to point to the directory that -# contains the Arduino installation (for example, under Mac OS X, this -# might be /Applications/arduino-0012). +# Features: +# - boards.txt is used to derive parameters +# - All intermediate files are put into a separate directory (TMPDIRNAME) +# - Simple use: Copy Makefile into the same directory of the .pde file # -# 2. Modify the line containing "PORT" to refer to the filename -# representing the USB or serial connection to your Arduino board -# (e.g. PORT = /dev/tty.USB0). If the exact name of this file -# changes, you can use * as a wildcard (e.g. PORT = /dev/tty.usb*). +# Limitations: +# - requires UNIX environment +# - TMPDIRNAME must be subdirectory of the current directory. # -# 3. Set the line containing "MCU" to match your board's processor. -# Older one's are atmega8 based, newer ones like Arduino Mini, Bluetooth -# or Diecimila have the atmega168. If you're using a LilyPad Arduino, -# change F_CPU to 8000000. +# Targets +# all build everything +# upload build and upload to arduino +# clean remove all temporary files (includes final hex file) # -# 4. Type "make" and press enter to compile/verify your program. +# History +# 001 28 Apr 2010 first release +# 002 05 Oct 2010 added 'uno' # -# 5. Type "make upload", reset your Arduino board, and press enter to -# upload your program to the Arduino board. -# -# $Id$ -TARGET = Marlin -INSTALL_DIR = ../../Desktop/arduino-0018/ -UPLOAD_RATE = 38400 -AVRDUDE_PROGRAMMER = stk500v1 -PORT = /dev/ttyUSB0 -#MCU = atmega2560 -#For "old" Arduino Mega -#MCU = atmega1280 -#For Sanguinololu -MCU = atmega644p -F_CPU = 16000000 +#=== user configuration === +# All ...PATH variables must have a '/' at the end + +# Board (and prozessor) information: see $(ARDUINO_PATH)hardware/arduino/boards.txt +# Some examples: +# BOARD DESCRIPTION +# uno Arduino Uno +# atmega328 Arduino Duemilanove or Nano w/ ATmega328 +# diecimila Arduino Diecimila, Duemilanove, or Nano w/ ATmega168 +# mega Arduino Mega +# mini Arduino Mini +# lilypad328 LilyPad Arduino w/ ATmega328 +BOARD:=mega + +# additional (comma separated) defines +# -DDOGM128_HW board is connected to DOGM128 display +# -DDOGM132_HW board is connected to DOGM132 display +# -DDOGS102_HW board is connected to DOGS102 display +# -DDOG_REVERSE 180 degree rotation +# -DDOG_SPI_SW_ARDUINO force SW shiftOut +DEFS=-DDOGS102_HW -DDOG_DOUBLE_MEMORY -DDOG_SPI_SW_ARDUINO + +# The location where the avr tools (e.g. avr-gcc) are located. Requires a '/' at the end. +# Can be empty if all tools are accessable through the search path +AVR_TOOLS_PATH:=/usr/bin/ + +# Install path of the arduino software. Requires a '/' at the end. +ARDUINO_PATH:=/home/bkubicek/software/arduino-0022/ + +# Install path for avrdude. Requires a '/' at the end. Can be empty if avrdude is in the search path. +AVRDUDE_PATH:= + +# The unix device where we can reach the arduino board +# Uno: /dev/ttyACM0 +# Duemilanove: /dev/ttyUSB0 +AVRDUDE_PORT:=/dev/ttyACM0 + +# List of all libaries which should be included. +#EXTRA_DIRS=$(ARDUINO_PATH)libraries/LiquidCrystal/ +#EXTRA_DIRS+=$(ARDUINO_PATH)libraries/Dogm/ +#EXTRA_DIRS+=/home/kraus/src/arduino/dogm128/hg/libraries/Dogm/ + +#=== fetch parameter from boards.txt processor parameter === +# the basic idea is to get most of the information from boards.txt + +BOARDS_TXT:=$(ARDUINO_PATH)hardware/arduino/boards.txt + +# get the MCU value from the $(BOARD).build.mcu variable. For the atmega328 board this is atmega328p +MCU:=$(shell sed -n -e "s/$(BOARD).build.mcu=\(.*\)/\1/p" $(BOARDS_TXT)) +# get the F_CPU value from the $(BOARD).build.f_cpu variable. For the atmega328 board this is 16000000 +F_CPU:=$(shell sed -n -e "s/$(BOARD).build.f_cpu=\(.*\)/\1/p" $(BOARDS_TXT)) + +# avrdude +# get the AVRDUDE_UPLOAD_RATE value from the $(BOARD).upload.speed variable. For the atmega328 board this is 57600 +AVRDUDE_UPLOAD_RATE:=$(shell sed -n -e "s/$(BOARD).upload.speed=\(.*\)/\1/p" $(BOARDS_TXT)) +# get the AVRDUDE_PROGRAMMER value from the $(BOARD).upload.protocol variable. For the atmega328 board this is stk500 +# AVRDUDE_PROGRAMMER:=$(shell sed -n -e "s/$(BOARD).upload.protocol=\(.*\)/\1/p" $(BOARDS_TXT)) +# use stk500v1, because stk500 will default to stk500v2 +AVRDUDE_PROGRAMMER:=stk500v1 + +#=== identify user files === +PDESRC:=$(shell ls *.pde) +TARGETNAME=$(basename $(PDESRC)) + +CDIRS:=$(EXTRA_DIRS) $(addsuffix utility/,$(EXTRA_DIRS)) +CDIRS:=*.c utility/*.c $(addsuffix *.c,$(CDIRS)) $(ARDUINO_PATH)hardware/arduino/cores/arduino/*.c +CSRC:=$(shell ls $(CDIRS) 2>/dev/null) + +CCSRC:=$(shell ls *.cc 2>/dev/null) + +CPPDIRS:=$(EXTRA_DIRS) $(addsuffix utility/,$(EXTRA_DIRS)) +CPPDIRS:=*.cpp utility/*.cpp $(addsuffix *.cpp,$(CPPDIRS)) $(ARDUINO_PATH)hardware/arduino/cores/arduino/*.cpp +CPPSRC:=$(shell ls $(CPPDIRS) 2>/dev/null) + +#=== build internal variables === + +# the name of the subdirectory where everything is stored +TMPDIRNAME:=tmp +TMPDIRPATH:=$(TMPDIRNAME)/ + +AVRTOOLSPATH:=$(AVR_TOOLS_PATH) + +OBJCOPY:=$(AVRTOOLSPATH)avr-objcopy +OBJDUMP:=$(AVRTOOLSPATH)avr-objdump +SIZE:=$(AVRTOOLSPATH)avr-size + +CPPSRC:=$(addprefix $(TMPDIRPATH),$(PDESRC:.pde=.cpp)) $(CPPSRC) + +COBJ:=$(CSRC:.c=.o) +CCOBJ:=$(CCSRC:.cc=.o) +CPPOBJ:=$(CPPSRC:.cpp=.o) + +OBJFILES:=$(COBJ) $(CCOBJ) $(CPPOBJ) +DIRS:= $(dir $(OBJFILES)) + +DEPFILES:=$(OBJFILES:.o=.d) +# assembler files from avr-gcc -S +ASSFILES:=$(OBJFILES:.o=.s) +# disassembled object files with avr-objdump -S +DISFILES:=$(OBJFILES:.o=.dis) -############################################################################ -# Below here nothing should be changed... +LIBNAME:=$(TMPDIRPATH)$(TARGETNAME).a +ELFNAME:=$(TMPDIRPATH)$(TARGETNAME).elf +HEXNAME:=$(TMPDIRPATH)$(TARGETNAME).hex -ARDUINO = $(INSTALL_DIR)/hardware/Sanguino/cores/arduino -AVR_TOOLS_PATH = $(INSTALL_DIR)/hardware/tools/avr/bin -SRC = $(ARDUINO)/pins_arduino.c wiring.c wiring_serial.c \ -$(ARDUINO)/wiring_analog.c $(ARDUINO)/wiring_digital.c \ -$(ARDUINO)/wiring_pulse.c \ -$(ARDUINO)/wiring_shift.c $(ARDUINO)/WInterrupts.c -CXXSRC = $(ARDUINO)/HardwareSerial.cpp $(ARDUINO)/WMath.cpp \ -$(ARDUINO)/Print.cpp ./SdFile.cpp ./SdVolume.cpp ./Sd2Card.cpp -FORMAT = ihex +AVRDUDE_FLAGS = -V -F +AVRDUDE_FLAGS += -C $(ARDUINO_PATH)/hardware/tools/avrdude.conf +AVRDUDE_FLAGS += -p $(MCU) +AVRDUDE_FLAGS += -P $(AVRDUDE_PORT) +AVRDUDE_FLAGS += -c $(AVRDUDE_PROGRAMMER) +AVRDUDE_FLAGS += -b $(AVRDUDE_UPLOAD_RATE) +AVRDUDE_FLAGS += -U flash:w:$(HEXNAME) + +AVRDUDE = avrdude + +#=== predefined variable override === +# use "make -p -f/dev/null" to see the default rules and definitions + +# Build C and C++ flags. Include path information must be placed here +COMMON_FLAGS = -DF_CPU=$(F_CPU) -mmcu=$(MCU) $(DEFS) +# COMMON_FLAGS += -gdwarf-2 +COMMON_FLAGS += -Os +COMMON_FLAGS += -Wall -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums +COMMON_FLAGS += -I. +COMMON_FLAGS += -I$(ARDUINO_PATH)hardware/arduino/cores/arduino +COMMON_FLAGS += $(addprefix -I,$(EXTRA_DIRS)) +COMMON_FLAGS += -ffunction-sections -fdata-sections -Wl,--gc-sections +COMMON_FLAGS += -Wl,--relax +COMMON_FLAGS += -mcall-prologues + +CFLAGS = $(COMMON_FLAGS) -std=gnu99 -Wstrict-prototypes +CXXFLAGS = $(COMMON_FLAGS) + +# Replace standard build tools by avr tools +CC = $(AVRTOOLSPATH)avr-gcc +CXX = $(AVRTOOLSPATH)avr-g++ +AR = @$(AVRTOOLSPATH)avr-ar -# Name of this Makefile (used for "make depend"). -MAKEFILE = Makefile +# "rm" must be able to delete a directory tree +RM = rm -rf -# Debugging format. -# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2. -# AVR (extended) COFF requires stabs, plus an avr-objcopy run. -DEBUG = stabs +#=== rules === -OPT = s +# add rules for the C/C++ files where the .o file is placed in the TMPDIRPATH +# reuse existing variables as far as possible -# Place -D or -U options here -CDEFS = -DF_CPU=$(F_CPU) -CXXDEFS = -DF_CPU=$(F_CPU) +$(TMPDIRPATH)%.o: %.c + @echo compile $< + @$(COMPILE.c) $(OUTPUT_OPTION) $< -# Place -I options here -CINCS = -I$(ARDUINO) -CXXINCS = -I$(ARDUINO) +$(TMPDIRPATH)%.o: %.cc + @echo compile $< + @$(COMPILE.cc) $(OUTPUT_OPTION) $< -# Compiler flag to set the C Standard level. -# c89 - "ANSI" C -# gnu89 - c89 plus GCC extensions -# c99 - ISO C99 standard (not yet fully implemented) -# gnu99 - c99 plus GCC extensions -#CSTANDARD = -std=gnu99 -CDEBUG = -g$(DEBUG) -CWARN = -Wall -Wunused-variable -CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -w -ffunction-sections -fdata-sections -DARDUINO=22 -#CEXTRA = -Wa,-adhlns=$(<:.c=.lst) +$(TMPDIRPATH)%.o: %.cpp + @echo compile $< + @$(COMPILE.cpp) $(OUTPUT_OPTION) $< -CFLAGS = $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CWARN) $(CEXTRA) $(CTUNING) -CXXFLAGS = $(CDEFS) $(CINCS) -O$(OPT) -Wall $(CEXTRA) $(CTUNING) -#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs -LDFLAGS = -lm +$(TMPDIRPATH)%.s: %.c + @$(COMPILE.c) $(OUTPUT_OPTION) -S $< +$(TMPDIRPATH)%.s: %.cc + @$(COMPILE.cc) $(OUTPUT_OPTION) -S $< -# Programming support using avrdude. Settings and variables. -AVRDUDE_PORT = $(PORT) -AVRDUDE_WRITE_FLASH = -U flash:w:applet/$(TARGET).hex:i -AVRDUDE_FLAGS = -D -C $(INSTALL_DIR)/hardware/tools/avrdude.conf \ --p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \ --b $(UPLOAD_RATE) +$(TMPDIRPATH)%.s: %.cpp + @$(COMPILE.cpp) $(OUTPUT_OPTION) -S $< -# Program settings -CC = $(AVR_TOOLS_PATH)/avr-gcc -CXX = $(AVR_TOOLS_PATH)/avr-g++ -OBJCOPY = $(AVR_TOOLS_PATH)/avr-objcopy -OBJDUMP = $(AVR_TOOLS_PATH)/avr-objdump -AR = $(AVR_TOOLS_PATH)/avr-ar -SIZE = $(AVR_TOOLS_PATH)/avr-size -NM = $(AVR_TOOLS_PATH)/avr-nm -AVRDUDE = $(INSTALL_DIR)/hardware/tools/avrdude -REMOVE = rm -f -MV = mv -f +$(TMPDIRPATH)%.dis: $(TMPDIRPATH)%.o + @$(OBJDUMP) -S $< > $@ -# Define all object files. -OBJ = $(SRC:.c=.o) $(CXXSRC:.cpp=.o) $(ASRC:.S=.o) - -# Define all listing files. -LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst) - -# Combine all necessary flags and optional flags. -# Add target processor to flags. -ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) -ALL_CXXFLAGS = -mmcu=$(MCU) -I. $(CXXFLAGS) -ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) - - -# Default target. -all: applet_files_ez build sizeafter - -build: elf hex - -applet_files_ez: $(TARGET).pde - # Here is the "preprocessing". - # It creates a .cpp file based with the same name as the .pde file. - # On top of the new .cpp file comes the WProgram.h header. - # At the end there is a generic main() function attached. - # Then the .cpp file will be compiled. Errors during compile will - # refer to this new, automatically generated, file. - # Not the original .pde file you actually edit... - test -d applet || mkdir applet - echo '#include "WProgram.h"' > applet/$(TARGET).cpp - cat $(TARGET).pde >> applet/$(TARGET).cpp - cat $(ARDUINO)/main.cpp >> applet/$(TARGET).cpp - -elf: applet/$(TARGET).elf -hex: applet/$(TARGET).hex -eep: applet/$(TARGET).eep -lss: applet/$(TARGET).lss -sym: applet/$(TARGET).sym - -# Program the device. -upload: applet/$(TARGET).hex - $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) - - - # Display size of file. -HEXSIZE = $(SIZE) --target=$(FORMAT) applet/$(TARGET).hex -ELFSIZE = $(SIZE) applet/$(TARGET).elf -sizebefore: - @if [ -f applet/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(HEXSIZE); echo; fi - -sizeafter: - @if [ -f applet/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(HEXSIZE); echo; fi - - -# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. -COFFCONVERT=$(OBJCOPY) --debugging \ ---change-section-address .data-0x800000 \ ---change-section-address .bss-0x800000 \ ---change-section-address .noinit-0x800000 \ ---change-section-address .eeprom-0x810000 - - -coff: applet/$(TARGET).elf - $(COFFCONVERT) -O coff-avr applet/$(TARGET).elf $(TARGET).cof - - -extcoff: $(TARGET).elf - $(COFFCONVERT) -O coff-ext-avr applet/$(TARGET).elf $(TARGET).cof - - -.SUFFIXES: .elf .hex .eep .lss .sym +.SUFFIXES: .elf .hex .pde .elf.hex: - $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ - -.elf.eep: - -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ - --change-section-lma .eeprom=0 -O $(FORMAT) $< $@ - -# Create extended listing file from ELF output file. -.elf.lss: - $(OBJDUMP) -h -S $< > $@ - -# Create a symbol table from ELF output file. -.elf.sym: - $(NM) -n $< > $@ - - # Link: create ELF output file from library. -applet/$(TARGET).elf: $(TARGET).pde applet/core.a - $(CC) $(ALL_CFLAGS) -Wl,--gc-sections -o $@ applet/$(TARGET).cpp -L. applet/core.a $(LDFLAGS) - -applet/core.a: $(OBJ) - @for i in $(OBJ); do echo $(AR) rcs applet/core.a $$i; $(AR) rcs applet/core.a $$i; done + @$(OBJCOPY) -O ihex -R .eeprom $< $@ + +$(TMPDIRPATH)%.cpp: %.pde + @cat $(ARDUINO_PATH)hardware/arduino/cores/arduino/main.cpp > $@ + @cat $< >> $@ + @echo >> $@ + @echo 'extern "C" void __cxa_pure_virtual() { while (1); }' >> $@ +.PHONY: all +all: tmpdir $(HEXNAME) assemblersource showsize + ls -al $(HEXNAME) $(ELFNAME) -# Compile: create object files from C++ source files. -.cpp.o: - $(CXX) -c $(ALL_CXXFLAGS) $< -o $@ +$(ELFNAME): $(LIBNAME)($(addprefix $(TMPDIRPATH),$(OBJFILES))) + $(LINK.o) $(COMMON_FLAGS) $(LIBNAME) $(LOADLIBES) $(LDLIBS) -o $@ -# Compile: create object files from C source files. -.c.o: - $(CC) -c $(ALL_CFLAGS) $< -o $@ +$(LIBNAME)(): $(addprefix $(TMPDIRPATH),$(OBJFILES)) + +#=== create temp directory === +# not really required, because it will be also created during the dependency handling +.PHONY: tmpdir +tmpdir: + @test -d $(TMPDIRPATH) || mkdir $(TMPDIRPATH) + +#=== create assembler files for each C/C++ file === +.PHONY: assemblersource +assemblersource: $(addprefix $(TMPDIRPATH),$(ASSFILES)) $(addprefix $(TMPDIRPATH),$(DISFILES)) -# Compile: create assembler files from C source files. -.c.s: - $(CC) -S $(ALL_CFLAGS) $< -o $@ +#=== show the section sizes of the ELF file === +.PHONY: showsize +showsize: $(ELFNAME) + $(SIZE) $< - -# Assemble: create object files from assembler source files. -.S.o: - $(CC) -c $(ALL_ASFLAGS) $< -o $@ - - - -# Target: clean project. +#=== clean up target === +# this is simple: the TMPDIRPATH is removed +.PHONY: clean clean: - $(REMOVE) applet/$(TARGET).hex applet/$(TARGET).eep applet/$(TARGET).cof applet/$(TARGET).elf \ - applet/$(TARGET).map applet/$(TARGET).sym applet/$(TARGET).lss applet/core.a \ - $(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d) + $(RM) $(TMPDIRPATH) + +# Program the device. +# step 1: reset the arduino board with the stty command +# step 2: user avrdude to upload the software +.PHONY: upload +upload: $(HEXNAME) + stty -F $(AVRDUDE_PORT) hupcl + $(AVRDUDE) $(AVRDUDE_FLAGS) + + +# === dependency handling === +# From the gnu make manual (section 4.14, Generating Prerequisites Automatically) +# Additionally (because this will be the first executed rule) TMPDIRPATH is created here. +# Instead of "sed" the "echo" command is used +# cd $(TMPDIRPATH); mkdir -p $(DIRS) 2> /dev/null; cd .. +DEPACTION=test -d $(TMPDIRPATH) || mkdir $(TMPDIRPATH);\ +mkdir -p $(addprefix $(TMPDIRPATH),$(DIRS));\ +set -e; echo -n $@ $(dir $@) > $@; $(CC) -MM $(COMMON_FLAGS) $< >> $@ + + +$(TMPDIRPATH)%.d: %.c + @$(DEPACTION) + +$(TMPDIRPATH)%.d: %.cc + @$(DEPACTION) + + +$(TMPDIRPATH)%.d: %.cpp + @$(DEPACTION) + +# Include dependency files. If a .d file is missing, a warning is created and the .d file is created +# This warning is not a problem (gnu make manual, section 3.3 Including Other Makefiles) +-include $(addprefix $(TMPDIRPATH),$(DEPFILES)) -depend: - if grep '^# DO NOT DELETE' $(MAKEFILE) >/dev/null; \ - then \ - sed -e '/^# DO NOT DELETE/,$$d' $(MAKEFILE) > \ - $(MAKEFILE).$$$$ && \ - $(MV) $(MAKEFILE).$$$$ $(MAKEFILE); \ - fi - echo '# DO NOT DELETE THIS LINE -- make depend depends on it.' \ - >> $(MAKEFILE); \ - $(CC) -M -mmcu=$(MCU) $(CDEFS) $(CINCS) $(SRC) $(ASRC) >> $(MAKEFILE) -.PHONY: all build elf hex eep lss sym program coff extcoff clean depend applet_files sizebefore sizeafter diff --git a/Marlin/Marlin.h b/Marlin/Marlin.h index 56d716542..cc43f00b2 100644 --- a/Marlin/Marlin.h +++ b/Marlin/Marlin.h @@ -1,27 +1,20 @@ +#ifndef __MARLINH +#define __MARLINH + // Tonokip RepRap firmware rewrite based off of Hydra-mmm firmware. // Licence: GPL #include #include "fastio.h" -extern "C" void __cxa_pure_virtual(); -void __cxa_pure_virtual(){}; + + +#define ECHO(x) Serial << "echo: " << x; +#define ECHOLN(x) Serial << "echo: "< -1 #define enable_x() WRITE(X_ENABLE_PIN, X_ENABLE_ON) #define disable_x() WRITE(X_ENABLE_PIN,!X_ENABLE_ON) @@ -43,9 +36,12 @@ float analog2tempu(int raw, const short table[][2], int numtemps); #define enable_z() ; #define disable_z() ; #endif + #if E_ENABLE_PIN > -1 -#define enable_e() WRITE(E_ENABLE_PIN, E_ENABLE_ON) -#define disable_e() WRITE(E_ENABLE_PIN,!E_ENABLE_ON) + + #define enable_e() WRITE(E_ENABLE_PIN, E_ENABLE_ON) + #define disable_e() WRITE(E_ENABLE_PIN,!E_ENABLE_ON) + #else #define enable_e() ; #define disable_e() ; @@ -61,47 +57,27 @@ void ClearToSend(); void get_coordinates(); void prepare_move(); -void linear_move(unsigned long steps_remaining[]); -void do_step(int axis); void kill(byte debug); -// This struct is used when buffering the setup for each linear movement "nominal" values are as specified in -// the source g-code and may never actually be reached if acceleration management is active. -typedef struct { - // Fields used by the bresenham algorithm for tracing the line - long steps_x, steps_y, steps_z, steps_e; // Step count along each axis - long step_event_count; // The number of step events required to complete this block - volatile long accelerate_until; // The index of the step event on which to stop acceleration - volatile long decelerate_after; // The index of the step event on which to start decelerating - volatile long acceleration_rate; // The acceleration rate used for acceleration calculation - unsigned char direction_bits; // The direction bit set for this block (refers to *_DIRECTION_BIT in config.h) +//void check_axes_activity(); +//void plan_init(); +//void st_init(); +//void tp_init(); +//void plan_buffer_line(float x, float y, float z, float e, float feed_rate); +//void plan_set_position(float x, float y, float z, float e); +//void st_wake_up(); +//void st_synchronize(); +void enquecommand(const char *cmd); +void wd_reset(); - long advance_rate; - volatile long initial_advance; - volatile long final_advance; - float advance; +#ifndef CRITICAL_SECTION_START +#define CRITICAL_SECTION_START unsigned char _sreg = SREG; cli(); +#define CRITICAL_SECTION_END SREG = _sreg; +#endif //CRITICAL_SECTION_START - // Fields used by the motion planner to manage acceleration - float speed_x, speed_y, speed_z, speed_e; // Nominal mm/minute for each axis - float nominal_speed; // The nominal speed for this block in mm/min - float millimeters; // The total travel of this block in mm - float entry_speed; - float acceleration; // acceleration mm/sec^2 +extern float homing_feedrate[]; +extern bool axis_relative_modes[]; - // Settings for the trapezoid generator - long nominal_rate; // The nominal step rate for this block in step_events/sec - volatile long initial_rate; // The jerk-adjusted step rate at start of block - volatile long final_rate; // The minimal rate at exit - long acceleration_st; // acceleration steps/sec^2 - volatile char busy; -} block_t; - -void check_axes_activity(); -void plan_init(); -void st_init(); -void tp_init(); -void plan_buffer_line(float x, float y, float z, float e, float feed_rate); -void plan_set_position(float x, float y, float z, float e); -void st_wake_up(); -void st_synchronize(); +void manage_inactivity(byte debug); +#endif diff --git a/Marlin/Marlin.pde b/Marlin/Marlin.pde index c1ece44cb..6922b8a1f 100644 --- a/Marlin/Marlin.pde +++ b/Marlin/Marlin.pde @@ -23,26 +23,29 @@ It has preliminary support for Matthew Roberts advance algorithm http://reprap.org/pipermail/reprap-dev/2011-May/003323.html - - This firmware is optimized for gen6 electronics. */ +#include #include "fastio.h" #include "Configuration.h" #include "pins.h" #include "Marlin.h" -#include "speed_lookuptable.h" +#include "ultralcd.h" +#include "streaming.h" +#include "planner.h" +#include "stepper.h" +#include "temperature.h" -char version_string[] = "0.9.10"; +#ifdef SIMPLE_LCD + #include "Simplelcd.h" +#endif + +char version_string[] = "1.0.0 Alpha 1"; #ifdef SDSUPPORT #include "SdFat.h" #endif //SDSUPPORT -#ifndef CRITICAL_SECTION_START -#define CRITICAL_SECTION_START unsigned char _sreg = SREG; cli() -#define CRITICAL_SECTION_END SREG = _sreg -#endif //CRITICAL_SECTION_START // look here for descriptions of gcodes: http://linuxcnc.org/handbook/gcode/g-code.html // http://objects.reprap.org/wiki/Mendel_User_Manual:_RepRapGCodes @@ -87,9 +90,17 @@ char version_string[] = "0.9.10"; // M115 - Capabilities string // M140 - Set bed target temp // M190 - Wait for bed current temp to reach target temp. +// M200 - Set filament diameter // M201 - Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000) -// M202 - Set max acceleration in units/s^2 for travel moves (M202 X1000 Y1000) +// M202 - Set max acceleration in units/s^2 for travel moves (M202 X1000 Y1000) Unused in Marlin!! +// M203 - Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E10000) in mm/sec +// M204 - Set default acceleration: S normal moves T filament only moves (M204 S3000 T7000) im mm/sec^2 also sets minimum segment time in ms (B20000) to prevent buffer underruns and M20 minimum feedrate +// M205 - advanced settings: minimum travel speed S=while printing T=travel only, B=minimum segment time X= maximum xy jerk, Z=maximum Z jerk +// M220 - set speed factor override percentage S:factor in percent // M301 - Set PID parameters P I and D +// M500 - stores paramters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). D +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. //Stepper Movement Variables @@ -100,15 +111,23 @@ float destination[NUM_AXIS] = { float current_position[NUM_AXIS] = { 0.0, 0.0, 0.0, 0.0}; bool home_all_axis = true; -long feedrate = 1500, next_feedrate, saved_feedrate; +float feedrate = 1500.0, next_feedrate, saved_feedrate; long gcode_N, gcode_LastN; + +float homing_feedrate[] = HOMING_FEEDRATE; +bool axis_relative_modes[] = AXIS_RELATIVE_MODES; + bool relative_mode = false; //Determines Absolute or Relative Coordinates bool relative_mode_e = false; //Determines Absolute or Relative E Codes while in Absolute Coordinates mode. E is always relative in Relative Coordinates mode. -unsigned long axis_steps_per_sqr_second[NUM_AXIS]; +uint8_t fanpwm=0; + +volatile int feedmultiply=100; //100->1 200->2 +int saved_feedmultiply; +volatile bool feedmultiplychanged=false; // comm variables #define MAX_CMD_SIZE 96 -#define BUFSIZE 8 +#define BUFSIZE 4 char cmdbuffer[BUFSIZE][MAX_CMD_SIZE]; bool fromsd[BUFSIZE]; int bufindr = 0; @@ -119,45 +138,23 @@ char serial_char; int serial_count = 0; boolean comment_mode = false; char *strchr_pointer; // just a pointer to find chars in the cmd string like X, Y, Z, E, etc +extern float HeaterPower; -// Manage heater variables. - -int target_raw = 0; -int current_raw = 0; -unsigned char temp_meas_ready = false; - -#ifdef PIDTEMP - double temp_iState = 0; - double temp_dState = 0; - double pTerm; - double iTerm; - double dTerm; - //int output; - double pid_error; - double temp_iState_min; - double temp_iState_max; - double pid_setpoint = 0.0; - double pid_input; - double pid_output; - bool pid_reset; -#endif //PIDTEMP +#include "EEPROM.h" +float tt = 0, bt = 0; #ifdef WATCHPERIOD int watch_raw = -1000; unsigned long watchmillis = 0; #endif //WATCHPERIOD -#ifdef MINTEMP -int minttemp = temp2analogh(MINTEMP); -#endif //MINTEMP -#ifdef MAXTEMP -int maxttemp = temp2analogh(MAXTEMP); -#endif //MAXTEMP //Inactivity shutdown variables unsigned long previous_millis_cmd = 0; unsigned long max_inactive_time = 0; unsigned long stepper_inactive_time = 0; +unsigned long starttime=0; +unsigned long stoptime=0; #ifdef SDSUPPORT Sd2Card card; SdVolume volume; @@ -169,6 +166,7 @@ bool sdmode = false; bool sdactive = false; bool savetosd = false; int16_t n; +long autostart_atmillis=0; void initsd(){ sdactive = false; @@ -184,10 +182,18 @@ void initsd(){ else if (!root.openRoot(&volume)) Serial.println("openRoot failed"); else + { sdactive = true; + Serial.println("SD card ok"); + } #endif //SDSS } +void quickinitsd(){ + sdactive=false; + autostart_atmillis=millis()+5000; +} + inline void write_command(char *buf){ char* begin = buf; char* npos = 0; @@ -210,147 +216,131 @@ inline void write_command(char *buf){ #endif //SDSUPPORT +///adds an command to the main command buffer +void enquecommand(const char *cmd) +{ + if(buflen < BUFSIZE) + { + //this is dangerous if a mixing of serial and this happsens + strcpy(&(cmdbuffer[bufindw][0]),cmd); + Serial.print("en:");Serial.println(cmdbuffer[bufindw]); + bufindw= (bufindw + 1)%BUFSIZE; + buflen += 1; + } +} + void setup() { + Serial.begin(BAUDRATE); - Serial.print("Marlin "); - Serial.println(version_string); + ECHOLN("Marlin "< -1 - SET_OUTPUT(X_DIR_PIN); -#endif -#if Y_DIR_PIN > -1 - SET_OUTPUT(Y_DIR_PIN); -#endif -#if Z_DIR_PIN > -1 - SET_OUTPUT(Z_DIR_PIN); -#endif -#if E_DIR_PIN > -1 - SET_OUTPUT(E_DIR_PIN); -#endif - //Initialize Enable Pins - steppers default to disabled. - -#if (X_ENABLE_PIN > -1) - SET_OUTPUT(X_ENABLE_PIN); - if(!X_ENABLE_ON) WRITE(X_ENABLE_PIN,HIGH); -#endif -#if (Y_ENABLE_PIN > -1) - SET_OUTPUT(Y_ENABLE_PIN); - if(!Y_ENABLE_ON) WRITE(Y_ENABLE_PIN,HIGH); -#endif -#if (Z_ENABLE_PIN > -1) - SET_OUTPUT(Z_ENABLE_PIN); - if(!Z_ENABLE_ON) WRITE(Z_ENABLE_PIN,HIGH); -#endif -#if (E_ENABLE_PIN > -1) - SET_OUTPUT(E_ENABLE_PIN); - if(!E_ENABLE_ON) WRITE(E_ENABLE_PIN,HIGH); -#endif - - //endstops and pullups -#ifdef ENDSTOPPULLUPS -#if X_MIN_PIN > -1 - SET_INPUT(X_MIN_PIN); - WRITE(X_MIN_PIN,HIGH); -#endif -#if X_MAX_PIN > -1 - SET_INPUT(X_MAX_PIN); - WRITE(X_MAX_PIN,HIGH); -#endif -#if Y_MIN_PIN > -1 - SET_INPUT(Y_MIN_PIN); - WRITE(Y_MIN_PIN,HIGH); -#endif -#if Y_MAX_PIN > -1 - SET_INPUT(Y_MAX_PIN); - WRITE(Y_MAX_PIN,HIGH); -#endif -#if Z_MIN_PIN > -1 - SET_INPUT(Z_MIN_PIN); - WRITE(Z_MIN_PIN,HIGH); -#endif -#if Z_MAX_PIN > -1 - SET_INPUT(Z_MAX_PIN); - WRITE(Z_MAX_PIN,HIGH); -#endif -#else //ENDSTOPPULLUPS -#if X_MIN_PIN > -1 - SET_INPUT(X_MIN_PIN); -#endif -#if X_MAX_PIN > -1 - SET_INPUT(X_MAX_PIN); -#endif -#if Y_MIN_PIN > -1 - SET_INPUT(Y_MIN_PIN); -#endif -#if Y_MAX_PIN > -1 - SET_INPUT(Y_MAX_PIN); -#endif -#if Z_MIN_PIN > -1 - SET_INPUT(Z_MIN_PIN); -#endif -#if Z_MAX_PIN > -1 - SET_INPUT(Z_MAX_PIN); -#endif -#endif //ENDSTOPPULLUPS - -#if (HEATER_0_PIN > -1) - SET_OUTPUT(HEATER_0_PIN); -#endif -#if (HEATER_1_PIN > -1) - SET_OUTPUT(HEATER_1_PIN); -#endif - - //Initialize Step Pins -#if (X_STEP_PIN > -1) - SET_OUTPUT(X_STEP_PIN); -#endif -#if (Y_STEP_PIN > -1) - SET_OUTPUT(Y_STEP_PIN); -#endif -#if (Z_STEP_PIN > -1) - SET_OUTPUT(Z_STEP_PIN); -#endif -#if (E_STEP_PIN > -1) - SET_OUTPUT(E_STEP_PIN); -#endif for(int i=0; i < NUM_AXIS; i++){ axis_steps_per_sqr_second[i] = max_acceleration_units_per_sq_second[i] * axis_steps_per_unit[i]; } -#ifdef PIDTEMP - temp_iState_min = 0.0; - temp_iState_max = PID_INTEGRAL_DRIVE_MAX / Ki; -#endif //PIDTEMP - #ifdef SDSUPPORT //power to SD reader #if SDPOWER > -1 SET_OUTPUT(SDPOWER); WRITE(SDPOWER,HIGH); #endif //SDPOWER - initsd(); + quickinitsd(); #endif //SDSUPPORT plan_init(); // Initialize planner; st_init(); // Initialize stepper; tp_init(); // Initialize temperature loop + //checkautostart(); } +#ifdef SDSUPPORT +bool autostart_stilltocheck=true; + + +void checkautostart(bool force) +{ + //this is to delay autostart and hence the initialisaiton of the sd card to some seconds after the normal init, so the device is available quick after a reset + if(!force) + { + if(!autostart_stilltocheck) + return; + if(autostart_atmillis 0) + { + for(int i=0;i= filesize){ sdmode = false; Serial.println("Done printing file"); + stoptime=millis(); + char time[30]; + unsigned long t=(stoptime-starttime)/1000; + int sec,min; + min=t/60; + sec=t%60; + sprintf(time,"%i min, %i sec",min,sec); + Serial.println(time); + LCD_MESSAGE(time); + checkautostart(true); } if(!serial_count) return; //if empty line cmdbuffer[bufindw][serial_count] = 0; //terminate string @@ -548,38 +549,41 @@ inline void process_commands() break; case 28: //G28 Home all Axis one at a time saved_feedrate = feedrate; + saved_feedmultiply = feedmultiply; + feedmultiply = 100; + for(int i=0; i < NUM_AXIS; i++) { destination[i] = current_position[i]; } - feedrate = 0; + feedrate = 0.0; home_all_axis = !((code_seen(axis_codes[0])) || (code_seen(axis_codes[1])) || (code_seen(axis_codes[2]))); if((home_all_axis) || (code_seen(axis_codes[X_AXIS]))) { if ((X_MIN_PIN > -1 && X_HOME_DIR==-1) || (X_MAX_PIN > -1 && X_HOME_DIR==1)){ - st_synchronize(); +// st_synchronize(); current_position[X_AXIS] = 0; plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); destination[X_AXIS] = 1.5 * X_MAX_LENGTH * X_HOME_DIR; feedrate = homing_feedrate[X_AXIS]; prepare_move(); - - st_synchronize(); + +// st_synchronize(); current_position[X_AXIS] = 0; plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); destination[X_AXIS] = -5 * X_HOME_DIR; prepare_move(); - - st_synchronize(); + +// st_synchronize(); destination[X_AXIS] = 10 * X_HOME_DIR; feedrate = homing_feedrate[X_AXIS]/2 ; prepare_move(); - st_synchronize(); - + +// st_synchronize(); current_position[X_AXIS] = (X_HOME_DIR == -1) ? 0 : X_MAX_LENGTH; plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); destination[X_AXIS] = current_position[X_AXIS]; - feedrate = 0; + feedrate = 0.0; } } @@ -590,23 +594,23 @@ inline void process_commands() destination[Y_AXIS] = 1.5 * Y_MAX_LENGTH * Y_HOME_DIR; feedrate = homing_feedrate[Y_AXIS]; prepare_move(); - st_synchronize(); +// st_synchronize(); current_position[Y_AXIS] = 0; plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); destination[Y_AXIS] = -5 * Y_HOME_DIR; prepare_move(); - st_synchronize(); +// st_synchronize(); destination[Y_AXIS] = 10 * Y_HOME_DIR; feedrate = homing_feedrate[Y_AXIS]/2; prepare_move(); - st_synchronize(); +// st_synchronize(); current_position[Y_AXIS] = (Y_HOME_DIR == -1) ? 0 : Y_MAX_LENGTH; plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); destination[Y_AXIS] = current_position[Y_AXIS]; - feedrate = 0; + feedrate = 0.0; } } @@ -617,26 +621,27 @@ inline void process_commands() destination[Z_AXIS] = 1.5 * Z_MAX_LENGTH * Z_HOME_DIR; feedrate = homing_feedrate[Z_AXIS]; prepare_move(); - st_synchronize(); +// st_synchronize(); current_position[Z_AXIS] = 0; plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); destination[Z_AXIS] = -2 * Z_HOME_DIR; prepare_move(); - st_synchronize(); +// st_synchronize(); destination[Z_AXIS] = 3 * Z_HOME_DIR; feedrate = homing_feedrate[Z_AXIS]/2; prepare_move(); - st_synchronize(); +// st_synchronize(); current_position[Z_AXIS] = (Z_HOME_DIR == -1) ? 0 : Z_MAX_LENGTH; plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); destination[Z_AXIS] = current_position[Z_AXIS]; - feedrate = 0; + feedrate = 0.0; } } feedrate = saved_feedrate; + feedmultiply = saved_feedmultiply; previous_millis_cmd = millis(); break; case 90: // G90 @@ -653,7 +658,6 @@ inline void process_commands() } plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); break; - } } @@ -701,6 +705,7 @@ inline void process_commands() case 24: //M24 - Start SD print if(sdactive){ sdmode = true; + starttime=millis(); } break; case 25: //M25 - Pause SD print @@ -753,70 +758,141 @@ inline void process_commands() //processed in write to file routine above //savetosd = false; break; + case 30: + { + stoptime=millis(); + char time[30]; + unsigned long t=(stoptime-starttime)/1000; + int sec,min; + min=t/60; + sec=t%60; + sprintf(time,"%i min, %i sec",min,sec); + Serial.println(time); + LCD_MESSAGE(time); + } + break; #endif //SDSUPPORT - case 104: // M104 -#ifdef PID_OPENLOOP - if (code_seen('S')) PidTemp_Output = code_value() * (PID_MAX/100.0); - if(pid_output > PID_MAX) pid_output = PID_MAX; - if(pid_output < 0) pid_output = 0; -#else //PID_OPENLOOP - if (code_seen('S')) { - target_raw = temp2analogh(code_value()); + case 104: // M104 + if (code_seen('S')) target_raw[0] = temp2analog(code_value()); #ifdef PIDTEMP - pid_setpoint = code_value(); -#endif //PIDTEMP - } -#ifdef WATCHPERIOD - if(target_raw > current_raw){ - watchmillis = max(1,millis()); - watch_raw = current_raw; - } - else{ - watchmillis = 0; - } -#endif //WATCHPERIOD -#endif //PID_OPENLOOP - break; - case 105: // M105 - Serial.print("ok T:"); - Serial.println(analog2temp(current_raw)); - return; - //break; - case 109: // M109 - Wait for extruder heater to reach target. - if (code_seen('S')) { - target_raw = temp2analogh(code_value()); + pid_setpoint = code_value(); +#endif //PIDTEM + #ifdef WATCHPERIOD + if(target_raw[0] > current_raw[0]){ + watchmillis = max(1,millis()); + watch_raw[0] = current_raw[0]; + }else{ + watchmillis = 0; + } + #endif + break; + case 140: // M140 set bed temp + if (code_seen('S')) target_raw[1] = temp2analogBed(code_value()); + break; + case 105: // M105 + #if (TEMP_0_PIN > -1) || defined (HEATER_USES_AD595) + tt = analog2temp(current_raw[0]); + #endif + #if TEMP_1_PIN > -1 + bt = analog2tempBed(current_raw[1]); + #endif + #if (TEMP_0_PIN > -1) || defined (HEATER_USES_AD595) + Serial.print("ok T:"); + Serial.print(tt); +// Serial.print(", raw:"); +// Serial.print(current_raw); + #if TEMP_1_PIN > -1 #ifdef PIDTEMP - pid_setpoint = code_value(); -#endif //PIDTEMP - } -#ifdef WATCHPERIOD - if(target_raw>current_raw){ - watchmillis = max(1,millis()); - watch_raw = current_raw; - } - else{ - watchmillis = 0; - } -#endif //WATCHERPERIOD - codenum = millis(); - while(current_raw < target_raw) { - if( (millis() - codenum) > 1000 ) //Print Temp Reading every 1 second while heating up. - { - Serial.print("T:"); - Serial.println( analog2temp(current_raw)); + Serial.print(" B:"); + #if TEMP_1_PIN > -1 + Serial.println(bt); + #else + Serial.println(HeaterPower); + #endif +#else + Serial.println(); +#endif + #else + Serial.println(); + #endif + #else + Serial.println("No thermistors - no temp"); + #endif + return; + //break; + case 109: // M109 - Wait for extruder heater to reach target. + LCD_MESSAGE("Heating..."); + if (code_seen('S')) target_raw[0] = temp2analog(code_value()); +#ifdef PIDTEMP + pid_setpoint = code_value(); +#endif //PIDTEM + #ifdef WATCHPERIOD + if(target_raw[0]>current_raw[0]){ + watchmillis = max(1,millis()); + watch_raw[0] = current_raw[0]; + }else{ + watchmillis = 0; + } + #endif codenum = millis(); + starttime=millis(); + while(current_raw[0] < target_raw[0]) { + if( (millis() - codenum) > 1000 ) { //Print Temp Reading every 1 second while heating up. + Serial.print("T:"); + Serial.println( analog2temp(current_raw[0]) ); + codenum = millis(); + } + LCD_STATUS; + manage_heater(); + } + LCD_MESSAGE("UltiMarlin ready."); + break; + case 190: // M190 - Wait bed for heater to reach target. + #if TEMP_1_PIN > -1 + if (code_seen('S')) target_raw[1] = temp2analog(code_value()); + codenum = millis(); + while(current_raw[1] < target_raw[1]) + { + if( (millis()-codenum) > 1000 ) //Print Temp Reading every 1 second while heating up. + { + float tt=analog2temp(current_raw[0]); + Serial.print("T:"); + Serial.println( tt ); + Serial.print("ok T:"); + Serial.print( tt ); + Serial.print(" B:"); + Serial.println( analog2temp(current_raw[1]) ); + codenum = millis(); + } + manage_heater(); } - manage_heater(); - } - break; - case 190: + #endif break; +#if FAN_PIN > -1 + case 106: //M106 Fan On + if (code_seen('S')){ + WRITE(FAN_PIN,HIGH); + fanpwm=constrain(code_value(),0,255); + analogWrite(FAN_PIN, fanpwm); + } + else { + WRITE(FAN_PIN,HIGH); + fanpwm=255; + analogWrite(FAN_PIN, fanpwm); + } + break; + case 107: //M107 Fan Off + WRITE(FAN_PIN,LOW); + analogWrite(FAN_PIN, 0); + break; +#endif case 82: axis_relative_modes[3] = false; break; case 83: axis_relative_modes[3] = true; break; + case 18: case 84: if(code_seen('S')){ stepper_inactive_time = code_value() * 1000; @@ -849,8 +925,17 @@ inline void process_commands() Serial.print(current_position[Y_AXIS]); Serial.print("Z:"); Serial.print(current_position[Z_AXIS]); - Serial.print("E:"); - Serial.println(current_position[E_AXIS]); + Serial.print("E:"); + Serial.print(current_position[E_AXIS]); + #ifdef DEBUG_STEPS + Serial.print(" Count X:"); + Serial.print(float(count_position[X_AXIS])/axis_steps_per_unit[X_AXIS]); + Serial.print("Y:"); + Serial.print(float(count_position[Y_AXIS])/axis_steps_per_unit[Y_AXIS]); + Serial.print("Z:"); + Serial.println(float(count_position[Z_AXIS])/axis_steps_per_unit[Z_AXIS]); + #endif + Serial.println(""); break; case 119: // M119 #if (X_MIN_PIN > -1) @@ -892,18 +977,67 @@ inline void process_commands() } break; #endif + case 203: // M203 max feedrate mm/sec + for(int i=0; i < NUM_AXIS; i++) { + if(code_seen(axis_codes[i])) max_feedrate[i] = code_value()*60 ; + } + break; + case 204: // M204 acclereration S normal moves T filmanent only moves + { + if(code_seen('S')) acceleration = code_value() ; + if(code_seen('T')) retract_acceleration = code_value() ; + } + break; + case 205: //M205 advanced settings: minimum travel speed S=while printing T=travel only, B=minimum segment time X= maximum xy jerk, Z=maximum Z jerk + { + if(code_seen('S')) minimumfeedrate = code_value()*60 ; + if(code_seen('T')) mintravelfeedrate = code_value()*60 ; + if(code_seen('B')) minsegmenttime = code_value() ; + if(code_seen('X')) max_xy_jerk = code_value()*60 ; + if(code_seen('Z')) max_z_jerk = code_value()*60 ; + } + break; + case 220: // M220 S- set speed factor override percentage + { + if(code_seen('S')) + { + feedmultiply = code_value() ; + feedmultiplychanged=true; + } + } + break; #ifdef PIDTEMP case 301: // M301 if(code_seen('P')) Kp = code_value(); if(code_seen('I')) Ki = code_value()*PID_dT; if(code_seen('D')) Kd = code_value()/PID_dT; - Serial.print("Kp ");Serial.println(Kp); - Serial.print("Ki ");Serial.println(Ki/PID_dT); - Serial.print("Kd ");Serial.println(Kd*PID_dT); - temp_iState_min = 0.0; - temp_iState_max = PID_INTEGRAL_DRIVE_MAX / Ki; +// ECHOLN("Kp "<<_FLOAT(Kp,2)); +// ECHOLN("Ki "<<_FLOAT(Ki/PID_dT,2)); +// ECHOLN("Kd "<<_FLOAT(Kd*PID_dT,2)); + +// temp_iState_min = 0.0; +// if (Ki!=0) { +// temp_iState_max = PID_INTEGRAL_DRIVE_MAX / (Ki/100.0); +// } +// else temp_iState_max = 1.0e10; break; #endif //PIDTEMP + case 500: // Store settings in EEPROM + { + StoreSettings(); + } + break; + case 501: // Read settings from EEPROM + { + RetrieveSettings(); + } + break; + case 502: // Revert to default settings + { + RetrieveSettings(true); + } + break; + } } else{ @@ -947,141 +1081,89 @@ inline void get_coordinates() void prepare_move() { - if (min_software_endstops) { - if (destination[X_AXIS] < 0) destination[X_AXIS] = 0.0; - if (destination[Y_AXIS] < 0) destination[Y_AXIS] = 0.0; - if (destination[Z_AXIS] < 0) destination[Z_AXIS] = 0.0; - } - - if (max_software_endstops) { - if (destination[X_AXIS] > X_MAX_LENGTH) destination[X_AXIS] = X_MAX_LENGTH; - if (destination[Y_AXIS] > Y_MAX_LENGTH) destination[Y_AXIS] = Y_MAX_LENGTH; - if (destination[Z_AXIS] > Z_MAX_LENGTH) destination[Z_AXIS] = Z_MAX_LENGTH; - } - - plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60.0); + plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate*feedmultiply/60.0/100.0); for(int i=0; i < NUM_AXIS; i++) { current_position[i] = destination[i]; } } -void manage_heater() -{ - float pid_input; - float pid_output; - if(temp_meas_ready != true) - return; -CRITICAL_SECTION_START; - temp_meas_ready = false; -CRITICAL_SECTION_END; -#ifdef PIDTEMP - pid_input = analog2temp(current_raw); +#ifdef USE_WATCHDOG -#ifndef PID_OPENLOOP - pid_error = pid_setpoint - pid_input; - if(pid_error > 10){ - pid_output = PID_MAX; - pid_reset = true; +#include +#include + +volatile uint8_t timeout_seconds=0; + +void(* ctrlaltdelete) (void) = 0; + +ISR(WDT_vect) { //Watchdog timer interrupt, called if main program blocks >1sec + if(timeout_seconds++ >= WATCHDOG_TIMEOUT) + { + kill(); +#ifdef RESET_MANUAL + LCD_MESSAGE("Please Reset!"); + ECHOLN("echo_: Something is wrong, please turn off the printer."); +#else + LCD_MESSAGE("Timeout, resetting!"); +#endif + //disable watchdog, it will survife reboot. + WDTCSR |= (1< raw) { - celsius = (float)table[i-1][1] + - (float)(raw - table[i-1][0]) * - (float)(table[i][1] - table[i-1][1]) / - (float)(table[i][0] - table[i-1][0]); - - break; - } - } - // Overflow: Set to last value in the table - if (i == numtemps) celsius = table[i-1][1]; - - return celsius; +/// reset watchdog. MUST be called every 1s after init or avr will reset. +void wd_reset() { + wdt_reset(); + timeout_seconds=0; //reset counter for resets } +#endif /* USE_WATCHDOG */ inline void kill() { - target_raw=0; -#ifdef PIDTEMP - pid_setpoint = 0.0; -#endif //PIDTEMP - OCR2B = 0; - WRITE(HEATER_0_PIN,LOW); - + #if TEMP_0_PIN > -1 + target_raw[0]=0; + #if HEATER_0_PIN > -1 + WRITE(HEATER_0_PIN,LOW); + #endif + #endif + #if TEMP_1_PIN > -1 + target_raw[1]=0; + #if HEATER_1_PIN > -1 + WRITE(HEATER_1_PIN,LOW); + #endif + #endif + #if TEMP_2_PIN > -1 + target_raw[2]=0; + #if HEATER_2_PIN > -1 + WRITE(HEATER_2_PIN,LOW); + #endif + #endif disable_x(); disable_y(); disable_z(); disable_e(); - + + if(PS_ON_PIN > -1) pinMode(PS_ON_PIN,INPUT); + Serial.println("!! Printer halted. kill() called!!"); + while(1); // Wait for reset } -inline void manage_inactivity(byte debug) { +void manage_inactivity(byte debug) { if( (millis()-previous_millis_cmd) > max_inactive_time ) if(max_inactive_time) kill(); if( (millis()-previous_millis_cmd) > stepper_inactive_time ) if(stepper_inactive_time) { disable_x(); @@ -1091,965 +1173,3 @@ inline void manage_inactivity(byte debug) { } check_axes_activity(); } - -// Planner - -/* - Reasoning behind the mathematics in this module (in the key of 'Mathematica'): - - s == speed, a == acceleration, t == time, d == distance - - Basic definitions: - - Speed[s_, a_, t_] := s + (a*t) - Travel[s_, a_, t_] := Integrate[Speed[s, a, t], t] - - Distance to reach a specific speed with a constant acceleration: - - Solve[{Speed[s, a, t] == m, Travel[s, a, t] == d}, d, t] - d -> (m^2 - s^2)/(2 a) --> estimate_acceleration_distance() - - Speed after a given distance of travel with constant acceleration: - - Solve[{Speed[s, a, t] == m, Travel[s, a, t] == d}, m, t] - m -> Sqrt[2 a d + s^2] - - DestinationSpeed[s_, a_, d_] := Sqrt[2 a d + s^2] - - When to start braking (di) to reach a specified destionation speed (s2) after accelerating - from initial speed s1 without ever stopping at a plateau: - - Solve[{DestinationSpeed[s1, a, di] == DestinationSpeed[s2, a, d - di]}, di] - di -> (2 a d - s1^2 + s2^2)/(4 a) --> intersection_distance() - - IntersectionDistance[s1_, s2_, a_, d_] := (2 a d - s1^2 + s2^2)/(4 a) - */ - - -// The number of linear motions that can be in the plan at any give time -#define BLOCK_BUFFER_SIZE 16 -#define BLOCK_BUFFER_MASK 0x0f - -static block_t block_buffer[BLOCK_BUFFER_SIZE]; // A ring buffer for motion instructions -static volatile unsigned char block_buffer_head; // Index of the next block to be pushed -static volatile unsigned char block_buffer_tail; // Index of the block to process now - -// The current position of the tool in absolute steps -static long position[4]; - -#define ONE_MINUTE_OF_MICROSECONDS 60000000.0 - -// Calculates the distance (not time) it takes to accelerate from initial_rate to target_rate using the -// given acceleration: -inline long estimate_acceleration_distance(long initial_rate, long target_rate, long acceleration) { - return( - (target_rate*target_rate-initial_rate*initial_rate)/ - (2L*acceleration) - ); -} - -// This function gives you the point at which you must start braking (at the rate of -acceleration) if -// you started at speed initial_rate and accelerated until this point and want to end at the final_rate after -// a total travel of distance. This can be used to compute the intersection point between acceleration and -// deceleration in the cases where the trapezoid has no plateau (i.e. never reaches maximum speed) - -inline long intersection_distance(long initial_rate, long final_rate, long acceleration, long distance) { - return( - (2*acceleration*distance-initial_rate*initial_rate+final_rate*final_rate)/ - (4*acceleration) - ); -} - -// Calculates trapezoid parameters so that the entry- and exit-speed is compensated by the provided factors. - -void calculate_trapezoid_for_block(block_t *block, float entry_speed, float exit_speed) { - if(block->busy == true) return; // If block is busy then bail out. - float entry_factor = entry_speed / block->nominal_speed; - float exit_factor = exit_speed / block->nominal_speed; - long initial_rate = ceil(block->nominal_rate*entry_factor); - long final_rate = ceil(block->nominal_rate*exit_factor); - -#ifdef ADVANCE - long initial_advance = block->advance*entry_factor*entry_factor; - long final_advance = block->advance*exit_factor*exit_factor; -#endif // ADVANCE - - // Limit minimal step rate (Otherwise the timer will overflow.) - if(initial_rate <120) initial_rate=120; - if(final_rate < 120) final_rate=120; - - // Calculate the acceleration steps - long acceleration = block->acceleration_st; - long accelerate_steps = estimate_acceleration_distance(initial_rate, block->nominal_rate, acceleration); - long decelerate_steps = estimate_acceleration_distance(final_rate, block->nominal_rate, acceleration); - // Calculate the size of Plateau of Nominal Rate. - long plateau_steps = block->step_event_count-accelerate_steps-decelerate_steps; - - // Is the Plateau of Nominal Rate smaller than nothing? That means no cruising, and we will - // have to use intersection_distance() to calculate when to abort acceleration and start braking - // in order to reach the final_rate exactly at the end of this block. - if (plateau_steps < 0) { - accelerate_steps = intersection_distance(initial_rate, final_rate, acceleration, block->step_event_count); - plateau_steps = 0; - } - - long decelerate_after = accelerate_steps+plateau_steps; - long acceleration_rate = (long)((float)acceleration * 8.388608); - - CRITICAL_SECTION_START; // Fill variables used by the stepper in a critical section - if(block->busy == false) { // Don't update variables if block is busy. - block->accelerate_until = accelerate_steps; - block->decelerate_after = decelerate_after; - block->acceleration_rate = acceleration_rate; - block->initial_rate = initial_rate; - block->final_rate = final_rate; -#ifdef ADVANCE - block->initial_advance = initial_advance; - block->final_advance = final_advance; -#endif ADVANCE - } - CRITICAL_SECTION_END; -} - -// Calculates the maximum allowable speed at this point when you must be able to reach target_velocity using the -// acceleration within the allotted distance. -inline float max_allowable_speed(float acceleration, float target_velocity, float distance) { - return( - sqrt(target_velocity*target_velocity-2*acceleration*60*60*distance) - ); -} - -// "Junction jerk" in this context is the immediate change in speed at the junction of two blocks. -// This method will calculate the junction jerk as the euclidean distance between the nominal -// velocities of the respective blocks. -inline float junction_jerk(block_t *before, block_t *after) { - return(sqrt( - pow((before->speed_x-after->speed_x), 2)+ - pow((before->speed_y-after->speed_y), 2))); -} - -// Return the safe speed which is max_jerk/2, e.g. the -// speed under which you cannot exceed max_jerk no matter what you do. -float safe_speed(block_t *block) { - float safe_speed; - safe_speed = max_xy_jerk/2; - if(abs(block->speed_z) > max_z_jerk/2) safe_speed = max_z_jerk/2; - if (safe_speed > block->nominal_speed) safe_speed = block->nominal_speed; - return safe_speed; -} - -// The kernel called by planner_recalculate() when scanning the plan from last to first entry. -void planner_reverse_pass_kernel(block_t *previous, block_t *current, block_t *next) { - if(!current) { - return; - } - - float entry_speed = current->nominal_speed; - float exit_factor; - float exit_speed; - if (next) { - exit_speed = next->entry_speed; - } - else { - exit_speed = safe_speed(current); - } - - // Calculate the entry_factor for the current block. - if (previous) { - // Reduce speed so that junction_jerk is within the maximum allowed - float jerk = junction_jerk(previous, current); - if((previous->steps_x == 0) && (previous->steps_y == 0)) { - entry_speed = safe_speed(current); - } - else if (jerk > max_xy_jerk) { - entry_speed = (max_xy_jerk/jerk) * entry_speed; - } - if(abs(previous->speed_z - current->speed_z) > max_z_jerk) { - entry_speed = (max_z_jerk/abs(previous->speed_z - current->speed_z)) * entry_speed; - } - // If the required deceleration across the block is too rapid, reduce the entry_factor accordingly. - if (entry_speed > exit_speed) { - float max_entry_speed = max_allowable_speed(-current->acceleration,exit_speed, current->millimeters); - if (max_entry_speed < entry_speed) { - entry_speed = max_entry_speed; - } - } - } - else { - entry_speed = safe_speed(current); - } - // Store result - current->entry_speed = entry_speed; -} - -// planner_recalculate() needs to go over the current plan twice. Once in reverse and once forward. This -// implements the reverse pass. -void planner_reverse_pass() { - char block_index = block_buffer_head; - block_index--; - block_t *block[3] = { NULL, NULL, NULL }; - while(block_index != block_buffer_tail) { - block_index--; - if(block_index < 0) block_index = BLOCK_BUFFER_SIZE-1; - block[2]= block[1]; - block[1]= block[0]; - block[0] = &block_buffer[block_index]; - planner_reverse_pass_kernel(block[0], block[1], block[2]); - } - planner_reverse_pass_kernel(NULL, block[0], block[1]); -} - -// The kernel called by planner_recalculate() when scanning the plan from first to last entry. -void planner_forward_pass_kernel(block_t *previous, block_t *current, block_t *next) { - if(!current) { - return; - } - if(previous) { - // If the previous block is an acceleration block, but it is not long enough to - // complete the full speed change within the block, we need to adjust out entry - // speed accordingly. Remember current->entry_factor equals the exit factor of - // the previous block. - if(previous->entry_speed < current->entry_speed) { - float max_entry_speed = max_allowable_speed(-previous->acceleration, previous->entry_speed, previous->millimeters); - if (max_entry_speed < current->entry_speed) { - current->entry_speed = max_entry_speed; - } - } - } -} - -// planner_recalculate() needs to go over the current plan twice. Once in reverse and once forward. This -// implements the forward pass. -void planner_forward_pass() { - char block_index = block_buffer_tail; - block_t *block[3] = { - NULL, NULL, NULL }; - - while(block_index != block_buffer_head) { - block[0] = block[1]; - block[1] = block[2]; - block[2] = &block_buffer[block_index]; - planner_forward_pass_kernel(block[0],block[1],block[2]); - block_index = (block_index+1) & BLOCK_BUFFER_MASK; - } - planner_forward_pass_kernel(block[1], block[2], NULL); -} - -// Recalculates the trapezoid speed profiles for all blocks in the plan according to the -// entry_factor for each junction. Must be called by planner_recalculate() after -// updating the blocks. -void planner_recalculate_trapezoids() { - char block_index = block_buffer_tail; - block_t *current; - block_t *next = NULL; - while(block_index != block_buffer_head) { - current = next; - next = &block_buffer[block_index]; - if (current) { - calculate_trapezoid_for_block(current, current->entry_speed, next->entry_speed); - } - block_index = (block_index+1) & BLOCK_BUFFER_MASK; - } - calculate_trapezoid_for_block(next, next->entry_speed, safe_speed(next)); -} - -// Recalculates the motion plan according to the following algorithm: -// -// 1. Go over every block in reverse order and calculate a junction speed reduction (i.e. block_t.entry_factor) -// so that: -// a. The junction jerk is within the set limit -// b. No speed reduction within one block requires faster deceleration than the one, true constant -// acceleration. -// 2. Go over every block in chronological order and dial down junction speed reduction values if -// a. The speed increase within one block would require faster accelleration than the one, true -// constant acceleration. -// -// When these stages are complete all blocks have an entry_factor that will allow all speed changes to -// be performed using only the one, true constant acceleration, and where no junction jerk is jerkier than -// the set limit. Finally it will: -// -// 3. Recalculate trapezoids for all blocks. - -void planner_recalculate() { - planner_reverse_pass(); - planner_forward_pass(); - planner_recalculate_trapezoids(); -} - -void plan_init() { - block_buffer_head = 0; - block_buffer_tail = 0; - memset(position, 0, sizeof(position)); // clear position -} - - -inline void plan_discard_current_block() { - if (block_buffer_head != block_buffer_tail) { - block_buffer_tail = (block_buffer_tail + 1) & BLOCK_BUFFER_MASK; - } -} - -inline block_t *plan_get_current_block() { - if (block_buffer_head == block_buffer_tail) { - return(NULL); - } - block_t *block = &block_buffer[block_buffer_tail]; - block->busy = true; - return(block); -} - -void check_axes_activity() { - unsigned char x_active = 0; - unsigned char y_active = 0; - unsigned char z_active = 0; - unsigned char e_active = 0; - block_t *block; - - if(block_buffer_tail != block_buffer_head) { - char block_index = block_buffer_tail; - while(block_index != block_buffer_head) { - block = &block_buffer[block_index]; - if(block->steps_x != 0) x_active++; - if(block->steps_y != 0) y_active++; - if(block->steps_z != 0) z_active++; - if(block->steps_e != 0) e_active++; - block_index = (block_index+1) & BLOCK_BUFFER_MASK; - } - } - if((DISABLE_X) && (x_active == 0)) disable_x(); - if((DISABLE_Y) && (y_active == 0)) disable_y(); - if((DISABLE_Z) && (z_active == 0)) disable_z(); - if((DISABLE_E) && (e_active == 0)) disable_e(); -} - -// Add a new linear movement to the buffer. steps_x, _y and _z is the absolute position in -// mm. Microseconds specify how many microseconds the move should take to perform. To aid acceleration -// calculation the caller must also provide the physical length of the line in millimeters. -void plan_buffer_line(float x, float y, float z, float e, float feed_rate) { - // The target position of the tool in absolute steps - // Calculate target position in absolute steps - long target[4]; - target[X_AXIS] = lround(x*axis_steps_per_unit[X_AXIS]); - target[Y_AXIS] = lround(y*axis_steps_per_unit[Y_AXIS]); - target[Z_AXIS] = lround(z*axis_steps_per_unit[Z_AXIS]); - target[E_AXIS] = lround(e*axis_steps_per_unit[E_AXIS]); - - // Calculate the buffer head after we push this byte - int next_buffer_head = (block_buffer_head + 1) & BLOCK_BUFFER_MASK; - - // If the buffer is full: good! That means we are well ahead of the robot. - // Rest here until there is room in the buffer. - while(block_buffer_tail == next_buffer_head) { - manage_heater(); - manage_inactivity(1); - } - - // Prepare to set up new block - block_t *block = &block_buffer[block_buffer_head]; - - // Mark block as not busy (Not executed by the stepper interrupt) - block->busy = false; - - // Number of steps for each axis - block->steps_x = labs(target[X_AXIS]-position[X_AXIS]); - block->steps_y = labs(target[Y_AXIS]-position[Y_AXIS]); - block->steps_z = labs(target[Z_AXIS]-position[Z_AXIS]); - block->steps_e = labs(target[E_AXIS]-position[E_AXIS]); - block->step_event_count = max(block->steps_x, max(block->steps_y, max(block->steps_z, block->steps_e))); - - // Bail if this is a zero-length block - if (block->step_event_count == 0) { - return; - }; - - //enable active axes - if(block->steps_x != 0) enable_x(); - if(block->steps_y != 0) enable_y(); - if(block->steps_z != 0) enable_z(); - if(block->steps_e != 0) enable_e(); - - float delta_x_mm = (target[X_AXIS]-position[X_AXIS])/axis_steps_per_unit[X_AXIS]; - float delta_y_mm = (target[Y_AXIS]-position[Y_AXIS])/axis_steps_per_unit[Y_AXIS]; - float delta_z_mm = (target[Z_AXIS]-position[Z_AXIS])/axis_steps_per_unit[Z_AXIS]; - float delta_e_mm = (target[E_AXIS]-position[E_AXIS])/axis_steps_per_unit[E_AXIS]; - block->millimeters = sqrt(square(delta_x_mm) + square(delta_y_mm) + square(delta_z_mm) + square(delta_e_mm)); - - unsigned long microseconds; - microseconds = lround((block->millimeters/feed_rate)*1000000); - - // Calculate speed in mm/minute for each axis - float multiplier = 60.0*1000000.0/microseconds; - block->speed_z = delta_z_mm * multiplier; - block->speed_x = delta_x_mm * multiplier; - block->speed_y = delta_y_mm * multiplier; - block->speed_e = delta_e_mm * multiplier; - - // Limit speed per axis - float speed_factor = 1; - float tmp_speed_factor; - if(abs(block->speed_x) > max_feedrate[X_AXIS]) { - speed_factor = max_feedrate[X_AXIS] / abs(block->speed_x); - } - if(abs(block->speed_y) > max_feedrate[Y_AXIS]){ - tmp_speed_factor = max_feedrate[Y_AXIS] / abs(block->speed_y); - if(speed_factor > tmp_speed_factor) speed_factor = tmp_speed_factor; - } - if(abs(block->speed_z) > max_feedrate[Z_AXIS]){ - tmp_speed_factor = max_feedrate[Z_AXIS] / abs(block->speed_z); - if(speed_factor > tmp_speed_factor) speed_factor = tmp_speed_factor; - } - if(abs(block->speed_e) > max_feedrate[E_AXIS]){ - tmp_speed_factor = max_feedrate[E_AXIS] / abs(block->speed_e); - if(speed_factor > tmp_speed_factor) speed_factor = tmp_speed_factor; - } - multiplier = multiplier * speed_factor; - block->speed_z = delta_z_mm * multiplier; - block->speed_x = delta_x_mm * multiplier; - block->speed_y = delta_y_mm * multiplier; - block->speed_e = delta_e_mm * multiplier; - block->nominal_speed = block->millimeters * multiplier; - block->nominal_rate = ceil(block->step_event_count * multiplier / 60); - - if(block->nominal_rate < 120) block->nominal_rate = 120; - block->entry_speed = safe_speed(block); - - // Compute the acceleration rate for the trapezoid generator. - float travel_per_step = block->millimeters/block->step_event_count; - if(block->steps_x == 0 && block->steps_y == 0 && block->steps_z == 0) { - block->acceleration_st = ceil( (retract_acceleration)/travel_per_step); // convert to: acceleration steps/sec^2 - } - else { - block->acceleration_st = ceil( (acceleration)/travel_per_step); // convert to: acceleration steps/sec^2 - // Limit acceleration per axis - if((block->acceleration_st * block->steps_x / block->step_event_count) > axis_steps_per_sqr_second[X_AXIS]) - block->acceleration_st = axis_steps_per_sqr_second[X_AXIS]; - if((block->acceleration_st * block->steps_y / block->step_event_count) > axis_steps_per_sqr_second[Y_AXIS]) - block->acceleration_st = axis_steps_per_sqr_second[Y_AXIS]; - if((block->acceleration_st * block->steps_e / block->step_event_count) > axis_steps_per_sqr_second[E_AXIS]) - block->acceleration_st = axis_steps_per_sqr_second[E_AXIS]; - if(((block->acceleration_st / block->step_event_count) * block->steps_z ) > axis_steps_per_sqr_second[Z_AXIS]) - block->acceleration_st = axis_steps_per_sqr_second[Z_AXIS]; - } - block->acceleration = block->acceleration_st * travel_per_step; - -#ifdef ADVANCE - // Calculate advance rate - if((block->steps_e == 0) || (block->steps_x == 0 && block->steps_y == 0 && block->steps_z == 0)) { - block->advance_rate = 0; - block->advance = 0; - } - else { - long acc_dist = estimate_acceleration_distance(0, block->nominal_rate, block->acceleration_st); - float advance = (STEPS_PER_CUBIC_MM_E * EXTRUDER_ADVANCE_K) * - (block->speed_e * block->speed_e * EXTRUTION_AREA * EXTRUTION_AREA / 3600.0)*65536; - block->advance = advance; - if(acc_dist == 0) { - block->advance_rate = 0; - } - else { - block->advance_rate = advance / (float)acc_dist; - } - } - -#endif // ADVANCE - - // compute a preliminary conservative acceleration trapezoid - float safespeed = safe_speed(block); - calculate_trapezoid_for_block(block, safespeed, safespeed); - - // Compute direction bits for this block - block->direction_bits = 0; - if (target[X_AXIS] < position[X_AXIS]) { - block->direction_bits |= (1<direction_bits |= (1<direction_bits |= (1<direction_bits |= (1<> 16 -// uses: -// r26 to store 0 -// r27 to store the byte 1 of the 24 bit result -#define MultiU16X8toH16(intRes, charIn1, intIn2) \ -asm volatile ( \ -"clr r26 \n\t" \ -"mul %A1, %B2 \n\t" \ -"movw %A0, r0 \n\t" \ -"mul %A1, %A2 \n\t" \ -"add %A0, r1 \n\t" \ -"adc %B0, r26 \n\t" \ -"lsr r0 \n\t" \ -"adc %A0, r26 \n\t" \ -"adc %B0, r26 \n\t" \ -"clr r1 \n\t" \ -: \ -"=&r" (intRes) \ -: \ -"d" (charIn1), \ -"d" (intIn2) \ -: \ -"r26" \ -) - -// intRes = longIn1 * longIn2 >> 24 -// uses: -// r26 to store 0 -// r27 to store the byte 1 of the 48bit result -#define MultiU24X24toH16(intRes, longIn1, longIn2) \ -asm volatile ( \ -"clr r26 \n\t" \ -"mul %A1, %B2 \n\t" \ -"mov r27, r1 \n\t" \ -"mul %B1, %C2 \n\t" \ -"movw %A0, r0 \n\t" \ -"mul %C1, %C2 \n\t" \ -"add %B0, r0 \n\t" \ -"mul %C1, %B2 \n\t" \ -"add %A0, r0 \n\t" \ -"adc %B0, r1 \n\t" \ -"mul %A1, %C2 \n\t" \ -"add r27, r0 \n\t" \ -"adc %A0, r1 \n\t" \ -"adc %B0, r26 \n\t" \ -"mul %B1, %B2 \n\t" \ -"add r27, r0 \n\t" \ -"adc %A0, r1 \n\t" \ -"adc %B0, r26 \n\t" \ -"mul %C1, %A2 \n\t" \ -"add r27, r0 \n\t" \ -"adc %A0, r1 \n\t" \ -"adc %B0, r26 \n\t" \ -"mul %B1, %A2 \n\t" \ -"add r27, r1 \n\t" \ -"adc %A0, r26 \n\t" \ -"adc %B0, r26 \n\t" \ -"lsr r27 \n\t" \ -"adc %A0, r26 \n\t" \ -"adc %B0, r26 \n\t" \ -"clr r1 \n\t" \ -: \ -"=&r" (intRes) \ -: \ -"d" (longIn1), \ -"d" (longIn2) \ -: \ -"r26" , "r27" \ -) - -// Some useful constants - -#define ENABLE_STEPPER_DRIVER_INTERRUPT() TIMSK1 |= (1< -// -// The trapezoid is the shape the speed curve over time. It starts at block->initial_rate, accelerates -// first block->accelerate_until step_events_completed, then keeps going at constant speed until -// step_events_completed reaches block->decelerate_after after which it decelerates until the trapezoid generator is reset. -// The slope of acceleration is calculated with the leib ramp alghorithm. - -void st_wake_up() { - // TCNT1 = 0; - ENABLE_STEPPER_DRIVER_INTERRUPT(); -} - -inline unsigned short calc_timer(unsigned short step_rate) { - unsigned short timer; - if(step_rate < 32) step_rate = 32; - step_rate -= 32; // Correct for minimal speed - if(step_rate >= (8*256)){ // higher step rate - unsigned short table_address = (unsigned short)&speed_lookuptable_fast[(unsigned char)(step_rate>>8)][0]; - unsigned char tmp_step_rate = (step_rate & 0x00ff); - unsigned short gain = (unsigned short)pgm_read_word_near(table_address+2); - MultiU16X8toH16(timer, tmp_step_rate, gain); - timer = (unsigned short)pgm_read_word_near(table_address) - timer; - } - else { // lower step rates - unsigned short table_address = (unsigned short)&speed_lookuptable_slow[0][0]; - table_address += ((step_rate)>>1) & 0xfffc; - timer = (unsigned short)pgm_read_word_near(table_address); - timer -= (((unsigned short)pgm_read_word_near(table_address+2) * (unsigned char)(step_rate & 0x0007))>>3); - } - if(timer < 100) timer = 100; - return timer; -} - -// Initializes the trapezoid generator from the current block. Called whenever a new -// block begins. -inline void trapezoid_generator_reset() { - accelerate_until = current_block->accelerate_until; - decelerate_after = current_block->decelerate_after; - acceleration_rate = current_block->acceleration_rate; - initial_rate = current_block->initial_rate; - final_rate = current_block->final_rate; - nominal_rate = current_block->nominal_rate; - advance = current_block->initial_advance; - final_advance = current_block->final_advance; - deceleration_time = 0; - advance_rate = current_block->advance_rate; - - // step_rate to timer interval - acc_step_rate = initial_rate; - acceleration_time = calc_timer(acc_step_rate); - OCR1A = acceleration_time; -} - -// "The Stepper Driver Interrupt" - This timer interrupt is the workhorse. -// It pops blocks from the block_buffer and executes them by pulsing the stepper pins appropriately. -ISR(TIMER1_COMPA_vect) -{ - if(busy){ /*Serial.println("BUSY")*/; - return; - } // The busy-flag is used to avoid reentering this interrupt - - busy = true; - sei(); // Re enable interrupts (normally disabled while inside an interrupt handler) - - // If there is no current block, attempt to pop one from the buffer - if (current_block == NULL) { - // Anything in the buffer? - current_block = plan_get_current_block(); - if (current_block != NULL) { - trapezoid_generator_reset(); - counter_x = -(current_block->step_event_count >> 1); - counter_y = counter_x; - counter_z = counter_x; - counter_e = counter_x; - step_events_completed = 0; - e_steps = 0; - } - else { - DISABLE_STEPPER_DRIVER_INTERRUPT(); - } - } - - if (current_block != NULL) { - // Set directions TO DO This should be done once during init of trapezoid. Endstops -> interrupt - out_bits = current_block->direction_bits; - -#ifdef ADVANCE - // Calculate E early. - counter_e += current_block->steps_e; - if (counter_e > 0) { - counter_e -= current_block->step_event_count; - if ((out_bits & (1<> 16) - old_advance); - CRITICAL_SECTION_END; - old_advance = advance >> 16; -#endif //ADVANCE - - // Set direction en check limit switches - if ((out_bits & (1<step_event_count; - } - } - else // +direction - WRITE(X_DIR_PIN,!INVERT_X_DIR); - - if ((out_bits & (1<step_event_count; - } - } - else // +direction - WRITE(Y_DIR_PIN,!INVERT_Y_DIR); - - if ((out_bits & (1<step_event_count; - } - } - else // +direction - WRITE(Z_DIR_PIN,!INVERT_Z_DIR); - -#ifndef ADVANCE - if ((out_bits & (1<steps_x; - if (counter_x > 0) { - WRITE(X_STEP_PIN, HIGH); - counter_x -= current_block->step_event_count; - WRITE(X_STEP_PIN, LOW); - } - - counter_y += current_block->steps_y; - if (counter_y > 0) { - WRITE(Y_STEP_PIN, HIGH); - counter_y -= current_block->step_event_count; - WRITE(Y_STEP_PIN, LOW); - } - - counter_z += current_block->steps_z; - if (counter_z > 0) { - WRITE(Z_STEP_PIN, HIGH); - counter_z -= current_block->step_event_count; - WRITE(Z_STEP_PIN, LOW); - } - -#ifndef ADVANCE - counter_e += current_block->steps_e; - if (counter_e > 0) { - WRITE(E_STEP_PIN, HIGH); - counter_e -= current_block->step_event_count; - WRITE(E_STEP_PIN, LOW); - } -#endif //!ADVANCE - - // Calculare new timer value - unsigned short timer; - unsigned short step_rate; - if (step_events_completed < accelerate_until) { - MultiU24X24toH16(acc_step_rate, acceleration_time, acceleration_rate); - acc_step_rate += initial_rate; - - // upper limit - if(acc_step_rate > nominal_rate) - acc_step_rate = nominal_rate; - - // step_rate to timer interval - timer = calc_timer(acc_step_rate); - advance += advance_rate; - acceleration_time += timer; - OCR1A = timer; - } - else if (step_events_completed >= decelerate_after) { - MultiU24X24toH16(step_rate, deceleration_time, acceleration_rate); - - if(step_rate > acc_step_rate) { // Check step_rate stays positive - step_rate = final_rate; - } - else { - step_rate = acc_step_rate - step_rate; // Decelerate from aceleration end point. - } - - // lower limit - if(step_rate < final_rate) - step_rate = final_rate; - - // step_rate to timer interval - timer = calc_timer(step_rate); -#ifdef ADVANCE - advance -= advance_rate; - if(advance < final_advance) - advance = final_advance; -#endif //ADVANCE - deceleration_time += timer; - OCR1A = timer; - } - // If current block is finished, reset pointer - step_events_completed += 1; - if (step_events_completed >= current_block->step_event_count) { - current_block = NULL; - plan_discard_current_block(); - } - } - busy=false; -} - -#ifdef ADVANCE - -unsigned char old_OCR0A; -// Timer interrupt for E. e_steps is set in the main routine; -// Timer 0 is shared with millies -ISR(TIMER0_COMPA_vect) -{ - // Critical section needed because Timer 1 interrupt has higher priority. - // The pin set functions are placed on trategic position to comply with the stepper driver timing. - WRITE(E_STEP_PIN, LOW); - // Set E direction (Depends on E direction + advance) - if (e_steps < 0) { - WRITE(E_DIR_PIN,INVERT_E_DIR); - e_steps++; - WRITE(E_STEP_PIN, HIGH); - } - if (e_steps > 0) { - WRITE(E_DIR_PIN,!INVERT_E_DIR); - e_steps--; - WRITE(E_STEP_PIN, HIGH); - } - old_OCR0A += 25; // 10kHz interrupt - OCR0A = old_OCR0A; -} -#endif // ADVANCE - -void st_init() -{ - // waveform generation = 0100 = CTC - TCCR1B &= ~(1<= 16) - { - current_raw = 16383 - raw_temp_value; - temp_meas_ready = true; - temp_count = 0; - raw_temp_value = 0; -#ifdef MAXTEMP - if(current_raw >= maxttemp) { - target_raw = 0; -#ifdef PIDTEMP - OCR2B = 0; -#else - WRITE(HEATER_0_PIN,LOW); -#endif //PIDTEMP - } -#endif //MAXTEMP -#ifdef MINTEMP - if(current_raw <= minttemp) { - target_raw = 0; -#ifdef PIDTEMP - OCR2B = 0; -#else - WRITE(HEATER_0_PIN,LOW); -#endif //PIDTEMP - } -#endif //MAXTEMP -#ifndef PIDTEMP - if(current_raw >= target_raw) - { - WRITE(HEATER_0_PIN,LOW); - } - else - { - WRITE(HEATER_0_PIN,HIGH); - } -#endif //PIDTEMP - } -} - - diff --git a/Marlin/fastio.h b/Marlin/fastio.h index 1d28d0582..c1671ddef 100644 --- a/Marlin/fastio.h +++ b/Marlin/fastio.h @@ -27,6 +27,7 @@ #define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN))) /// write to a pin #define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0) +//#define _WRITE(IO, v) do { #if (DIO ## IO ## _WPORT >= 0x100) CRITICAL_SECTION_START; if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); };#if (DIO ## IO ## _WPORT >= 0x100) CRITICAL_SECTION_END; } while (0) /// toggle a pin #define _TOGGLE(IO) do {DIO ## IO ## _RPORT = MASK(DIO ## IO ## _PIN); } while (0) diff --git a/Marlin/lcd.h b/Marlin/lcd.h new file mode 100644 index 000000000..74057ddde --- /dev/null +++ b/Marlin/lcd.h @@ -0,0 +1,10 @@ +#ifndef __LCDH +#define __LCDH + + + + + + + +#endif diff --git a/Marlin/lcd.pde b/Marlin/lcd.pde new file mode 100644 index 000000000..8b1378917 --- /dev/null +++ b/Marlin/lcd.pde @@ -0,0 +1 @@ + diff --git a/Marlin/pins.h b/Marlin/pins.h index 1bd670266..795d8bdbb 100644 --- a/Marlin/pins.h +++ b/Marlin/pins.h @@ -60,8 +60,8 @@ #define HEATER_0_PIN 6 #define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! - - +#define HEATER_1_PIN -1 +#define HEATER_2_PIN -1 #endif @@ -133,7 +133,8 @@ #define HEATER_0_PIN 14 #define TEMP_0_PIN 4 //D27 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! - +#define HEATER_1_PIN -1 +#define HEATER_2_PIN -1 /* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */ @@ -194,7 +195,8 @@ #define HEATER_0_PIN -1 #define TEMP_0_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! - +#define HEATER_1_PIN -1 +#define HEATER_2_PIN -1 @@ -255,8 +257,10 @@ #define HEATER_0_PIN 10 #define HEATER_1_PIN 8 +#define HEATER_2_PIN -1 #define TEMP_0_PIN 13 // ANALOG NUMBERING #define TEMP_1_PIN 14 // ANALOG NUMBERING +#define TEMP_2_PIN -1 // ANALOG NUMBERING #else // RAMPS_V_1_1 or RAMPS_V_1_2 as default @@ -301,9 +305,10 @@ #define HEATER_1_PIN 8 // RAMPS 1.1 #define FAN_PIN 9 // RAMPS 1.1 #endif - +#define HEATER_2_PIN -1 #define TEMP_0_PIN 2 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! #define TEMP_1_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! +#define TEMP_2_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! #endif // SPI for Max6675 Thermocouple @@ -361,7 +366,8 @@ #define HEATER_0_PIN 6 #define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! - +#define HEATER_1_PIN -1 +#define HEATER_2_PIN -1 #endif @@ -404,12 +410,13 @@ #define TEMP_0_PIN 5 //changed @ rkoeppl 20110410 #define HEATER_0_PIN 14 //changed @ rkoeppl 20110410 #define HEATER_1_PIN -1 //changed @ rkoeppl 20110410 - + #define HEATER_2_PIN -1 #define SDPOWER -1 #define SDSS 17 #define LED_PIN -1 //changed @ rkoeppl 20110410 #define TEMP_1_PIN -1 //changed @ rkoeppl 20110410 + #define TEMP_2_PIN -1 #define FAN_PIN -1 //changed @ rkoeppl 20110410 #define PS_ON_PIN -1 //changed @ rkoeppl 20110410 //our pin for debugging. @@ -421,6 +428,7 @@ #define RX_ENABLE_PIN 13 #endif + /**************************************************************************************** * Sanguinololu pin assignment * @@ -482,13 +490,77 @@ #define TEMP_0_PIN 7 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 33 extruder) #define TEMP_1_PIN 6 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed) -#define SDPOWER -1 -#define SDSS 31 +#define TEMP_2_PIN -1 +#define SDPOWER -1 +#define SDSS 31 +#define HEATER_2_PIN -1 + +#endif + + +#if MOTHERBOARD == 7 +#define KNOWN_BOARD +/***************************************************************** +* Ultimaker pin assignment +******************************************************************/ + +#ifndef __AVR_ATmega1280__ + #ifndef __AVR_ATmega2560__ + #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu. + #endif +#endif + +#define X_STEP_PIN 25 +#define X_DIR_PIN 23 +#define X_MIN_PIN 22 +#define X_MAX_PIN 24 +#define X_ENABLE_PIN 27 + +#define Y_STEP_PIN 31 +#define Y_DIR_PIN 33 +#define Y_MIN_PIN 26 +#define Y_MAX_PIN 28 +#define Y_ENABLE_PIN 29 + +#define Z_STEP_PIN 37 +#define Z_DIR_PIN 39 +#define Z_MIN_PIN 30 +#define Z_MAX_PIN 32 +#define Z_ENABLE_PIN 35 + +#define HEATER_1_PIN 4 +#define TEMP_1_PIN 11 + +#define EXTRUDER_0_STEP_PIN 43 +#define EXTRUDER_0_DIR_PIN 45 +#define EXTRUDER_0_ENABLE_PIN 41 +#define HEATER_0_PIN 2 +#define TEMP_0_PIN 8 + +#define EXTRUDER_1_STEP_PIN 49 +#define EXTRUDER_1_DIR_PIN 47 +#define EXTRUDER_1_ENABLE_PIN 51 +#define EXTRUDER_1_HEATER_PIN 3 +#define EXTRUDER_1_TEMPERATURE_PIN 10 +#define HEATER_2_PIN 51 +#define TEMP_2_PIN 3 + + + +#define E_STEP_PIN EXTRUDER_0_STEP_PIN +#define E_DIR_PIN EXTRUDER_0_DIR_PIN +#define E_ENABLE_PIN EXTRUDER_0_ENABLE_PIN + +#define SDPOWER -1 +#define SDSS 53 +#define LED_PIN 13 +#define FAN_PIN 7 +#define PS_ON_PIN 12 +#define KILL_PIN -1 +#endif + #ifndef KNOWN_BOARD #error Unknown MOTHERBOARD value in configuration.h #endif - -#endif - #endif diff --git a/Marlin/planner.cpp b/Marlin/planner.cpp new file mode 100644 index 000000000..645384e6d --- /dev/null +++ b/Marlin/planner.cpp @@ -0,0 +1,584 @@ +/* + planner.c - buffers movement commands and manages the acceleration profile plan + Part of Grbl + + Copyright (c) 2009-2011 Simen Svale Skogsrud + + Grbl is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Grbl is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Grbl. If not, see . +*/ + +/* The ring buffer implementation gleaned from the wiring_serial library by David A. Mellis. */ + +/* + Reasoning behind the mathematics in this module (in the key of 'Mathematica'): + + s == speed, a == acceleration, t == time, d == distance + + Basic definitions: + + Speed[s_, a_, t_] := s + (a*t) + Travel[s_, a_, t_] := Integrate[Speed[s, a, t], t] + + Distance to reach a specific speed with a constant acceleration: + + Solve[{Speed[s, a, t] == m, Travel[s, a, t] == d}, d, t] + d -> (m^2 - s^2)/(2 a) --> estimate_acceleration_distance() + + Speed after a given distance of travel with constant acceleration: + + Solve[{Speed[s, a, t] == m, Travel[s, a, t] == d}, m, t] + m -> Sqrt[2 a d + s^2] + + DestinationSpeed[s_, a_, d_] := Sqrt[2 a d + s^2] + + When to start braking (di) to reach a specified destionation speed (s2) after accelerating + from initial speed s1 without ever stopping at a plateau: + + Solve[{DestinationSpeed[s1, a, di] == DestinationSpeed[s2, a, d - di]}, di] + di -> (2 a d - s1^2 + s2^2)/(4 a) --> intersection_distance() + + IntersectionDistance[s1_, s2_, a_, d_] := (2 a d - s1^2 + s2^2)/(4 a) +*/ + + +//#include +//#include +//#include + +#include "Marlin.h" +#include "Configuration.h" +#include "pins.h" +#include "fastio.h" +#include "planner.h" +#include "stepper.h" +#include "temperature.h" +#include "ultralcd.h" + +unsigned long minsegmenttime; +float max_feedrate[4]; // set the max speeds +float axis_steps_per_unit[4]; +long max_acceleration_units_per_sq_second[4]; // Use M201 to override by software +float minimumfeedrate; +float acceleration; // Normal acceleration mm/s^2 THIS IS THE DEFAULT ACCELERATION for all moves. M204 SXXXX +float retract_acceleration; // mm/s^2 filament pull-pack and push-forward while standing still in the other axis M204 TXXXX +float max_xy_jerk; //speed than can be stopped at once, if i understand correctly. +float max_z_jerk; +float mintravelfeedrate; +unsigned long axis_steps_per_sqr_second[NUM_AXIS]; +// Manage heater variables. + +static block_t block_buffer[BLOCK_BUFFER_SIZE]; // A ring buffer for motion instfructions +static volatile unsigned char block_buffer_head; // Index of the next block to be pushed +static volatile unsigned char block_buffer_tail; // Index of the block to process now + +// The current position of the tool in absolute steps + long position[4]; + +#define ONE_MINUTE_OF_MICROSECONDS 60000000.0 + +// Calculates the distance (not time) it takes to accelerate from initial_rate to target_rate using the +// given acceleration: +inline float estimate_acceleration_distance(float initial_rate, float target_rate, float acceleration) { + if (acceleration!=0) { + return((target_rate*target_rate-initial_rate*initial_rate)/ + (2.0*acceleration)); + } + else { + return 0.0; // acceleration was 0, set acceleration distance to 0 + } +} + +// This function gives you the point at which you must start braking (at the rate of -acceleration) if +// you started at speed initial_rate and accelerated until this point and want to end at the final_rate after +// a total travel of distance. This can be used to compute the intersection point between acceleration and +// deceleration in the cases where the trapezoid has no plateau (i.e. never reaches maximum speed) + +inline float intersection_distance(float initial_rate, float final_rate, float acceleration, float distance) { + if (acceleration!=0) { + return((2.0*acceleration*distance-initial_rate*initial_rate+final_rate*final_rate)/ + (4.0*acceleration) ); + } + else { + return 0.0; // acceleration was 0, set intersection distance to 0 + } +} + +// Calculates trapezoid parameters so that the entry- and exit-speed is compensated by the provided factors. + +void calculate_trapezoid_for_block(block_t *block, float entry_speed, float exit_speed) { + if(block->busy == true) return; // If block is busy then bail out. + float entry_factor = entry_speed / block->nominal_speed; + float exit_factor = exit_speed / block->nominal_speed; + long initial_rate = ceil(block->nominal_rate*entry_factor); + long final_rate = ceil(block->nominal_rate*exit_factor); + +#ifdef ADVANCE + long initial_advance = block->advance*entry_factor*entry_factor; + long final_advance = block->advance*exit_factor*exit_factor; +#endif // ADVANCE + + // Limit minimal step rate (Otherwise the timer will overflow.) + if(initial_rate <120) initial_rate=120; + if(final_rate < 120) final_rate=120; + + // Calculate the acceleration steps + long acceleration = block->acceleration_st; + long accelerate_steps = estimate_acceleration_distance(initial_rate, block->nominal_rate, acceleration); + long decelerate_steps = estimate_acceleration_distance(final_rate, block->nominal_rate, acceleration); + // Calculate the size of Plateau of Nominal Rate. + long plateau_steps = block->step_event_count-accelerate_steps-decelerate_steps; + + // Is the Plateau of Nominal Rate smaller than nothing? That means no cruising, and we will + // have to use intersection_distance() to calculate when to abort acceleration and start braking + // in order to reach the final_rate exactly at the end of this block. + if (plateau_steps < 0) { + accelerate_steps = intersection_distance(initial_rate, final_rate, acceleration, block->step_event_count); + plateau_steps = 0; + } + + long decelerate_after = accelerate_steps+plateau_steps; + + CRITICAL_SECTION_START; // Fill variables used by the stepper in a critical section + if(block->busy == false) { // Don't update variables if block is busy. + block->accelerate_until = accelerate_steps; + block->decelerate_after = decelerate_after; + block->initial_rate = initial_rate; + block->final_rate = final_rate; +#ifdef ADVANCE + block->initial_advance = initial_advance; + block->final_advance = final_advance; +#endif //ADVANCE + } + CRITICAL_SECTION_END; +} + +// Calculates the maximum allowable speed at this point when you must be able to reach target_velocity using the +// acceleration within the allotted distance. +inline float max_allowable_speed(float acceleration, float target_velocity, float distance) { + return( + sqrt(target_velocity*target_velocity-2*acceleration*60*60*distance) + ); +} + +// "Junction jerk" in this context is the immediate change in speed at the junction of two blocks. +// This method will calculate the junction jerk as the euclidean distance between the nominal +// velocities of the respective blocks. +inline float junction_jerk(block_t *before, block_t *after) { + return(sqrt( + pow((before->speed_x-after->speed_x), 2)+ + pow((before->speed_y-after->speed_y), 2))); +} + +// Return the safe speed which is max_jerk/2, e.g. the +// speed under which you cannot exceed max_jerk no matter what you do. +float safe_speed(block_t *block) { + float safe_speed; + safe_speed = max_xy_jerk/2; + if(abs(block->speed_z) > max_z_jerk/2) safe_speed = max_z_jerk/2; + if (safe_speed > block->nominal_speed) safe_speed = block->nominal_speed; + return safe_speed; +} + +// The kernel called by planner_recalculate() when scanning the plan from last to first entry. +void planner_reverse_pass_kernel(block_t *previous, block_t *current, block_t *next) { + if(!current) { + return; + } + + float entry_speed = current->nominal_speed; + float exit_factor; + float exit_speed; + if (next) { + exit_speed = next->entry_speed; + } + else { + exit_speed = safe_speed(current); + } + + // Calculate the entry_factor for the current block. + if (previous) { + // Reduce speed so that junction_jerk is within the maximum allowed + float jerk = junction_jerk(previous, current); + if((previous->steps_x == 0) && (previous->steps_y == 0)) { + entry_speed = safe_speed(current); + } + else if (jerk > max_xy_jerk) { + entry_speed = (max_xy_jerk/jerk) * entry_speed; + } + if(abs(previous->speed_z - current->speed_z) > max_z_jerk) { + entry_speed = (max_z_jerk/abs(previous->speed_z - current->speed_z)) * entry_speed; + } + // If the required deceleration across the block is too rapid, reduce the entry_factor accordingly. + if (entry_speed > exit_speed) { + float max_entry_speed = max_allowable_speed(-current->acceleration,exit_speed, current->millimeters); + if (max_entry_speed < entry_speed) { + entry_speed = max_entry_speed; + } + } + } + else { + entry_speed = safe_speed(current); + } + // Store result + current->entry_speed = entry_speed; +} + +// planner_recalculate() needs to go over the current plan twice. Once in reverse and once forward. This +// implements the reverse pass. +void planner_reverse_pass() { + char block_index = block_buffer_head; + if(((block_buffer_head-block_buffer_tail + BLOCK_BUFFER_SIZE) & (BLOCK_BUFFER_SIZE - 1)) > 3) { + block_index = (block_buffer_head - 3) & (BLOCK_BUFFER_SIZE - 1); + block_t *block[5] = { + NULL, NULL, NULL, NULL, NULL }; + while(block_index != block_buffer_tail) { + block_index = (block_index-1) & (BLOCK_BUFFER_SIZE -1); + block[2]= block[1]; + block[1]= block[0]; + block[0] = &block_buffer[block_index]; + planner_reverse_pass_kernel(block[0], block[1], block[2]); + } + planner_reverse_pass_kernel(NULL, block[0], block[1]); + } +} + +// The kernel called by planner_recalculate() when scanning the plan from first to last entry. +void planner_forward_pass_kernel(block_t *previous, block_t *current, block_t *next) { + if(!current) { + return; + } + if(previous) { + // If the previous block is an acceleration block, but it is not long enough to + // complete the full speed change within the block, we need to adjust out entry + // speed accordingly. Remember current->entry_factor equals the exit factor of + // the previous block. + if(previous->entry_speed < current->entry_speed) { + float max_entry_speed = max_allowable_speed(-previous->acceleration, previous->entry_speed, previous->millimeters); + if (max_entry_speed < current->entry_speed) { + current->entry_speed = max_entry_speed; + } + } + } +} + +// planner_recalculate() needs to go over the current plan twice. Once in reverse and once forward. This +// implements the forward pass. +void planner_forward_pass() { + char block_index = block_buffer_tail; + block_t *block[3] = { + NULL, NULL, NULL }; + + while(block_index != block_buffer_head) { + block[0] = block[1]; + block[1] = block[2]; + block[2] = &block_buffer[block_index]; + planner_forward_pass_kernel(block[0],block[1],block[2]); + block_index = (block_index+1) & (BLOCK_BUFFER_SIZE - 1); + } + planner_forward_pass_kernel(block[1], block[2], NULL); +} + +// Recalculates the trapezoid speed profiles for all blocks in the plan according to the +// entry_factor for each junction. Must be called by planner_recalculate() after +// updating the blocks. +void planner_recalculate_trapezoids() { + char block_index = block_buffer_tail; + block_t *current; + block_t *next = NULL; + while(block_index != block_buffer_head) { + current = next; + next = &block_buffer[block_index]; + if (current) { + calculate_trapezoid_for_block(current, current->entry_speed, next->entry_speed); + } + block_index = (block_index+1) & (BLOCK_BUFFER_SIZE - 1); + } + calculate_trapezoid_for_block(next, next->entry_speed, safe_speed(next)); +} + +// Recalculates the motion plan according to the following algorithm: +// +// 1. Go over every block in reverse order and calculate a junction speed reduction (i.e. block_t.entry_factor) +// so that: +// a. The junction jerk is within the set limit +// b. No speed reduction within one block requires faster deceleration than the one, true constant +// acceleration. +// 2. Go over every block in chronological order and dial down junction speed reduction values if +// a. The speed increase within one block would require faster accelleration than the one, true +// constant acceleration. +// +// When these stages are complete all blocks have an entry_factor that will allow all speed changes to +// be performed using only the one, true constant acceleration, and where no junction jerk is jerkier than +// the set limit. Finally it will: +// +// 3. Recalculate trapezoids for all blocks. + +void planner_recalculate() { + planner_reverse_pass(); + planner_forward_pass(); + planner_recalculate_trapezoids(); +} + +void plan_init() { + block_buffer_head = 0; + block_buffer_tail = 0; + memset(position, 0, sizeof(position)); // clear position +} + + +void plan_discard_current_block() { + if (block_buffer_head != block_buffer_tail) { + block_buffer_tail = (block_buffer_tail + 1) & (BLOCK_BUFFER_SIZE - 1); + } +} + +block_t *plan_get_current_block() { + if (block_buffer_head == block_buffer_tail) { + return(NULL); + } + block_t *block = &block_buffer[block_buffer_tail]; + block->busy = true; + return(block); +} + +void check_axes_activity() { + unsigned char x_active = 0; + unsigned char y_active = 0; + unsigned char z_active = 0; + unsigned char e_active = 0; + block_t *block; + + if(block_buffer_tail != block_buffer_head) { + char block_index = block_buffer_tail; + while(block_index != block_buffer_head) { + block = &block_buffer[block_index]; + if(block->steps_x != 0) x_active++; + if(block->steps_y != 0) y_active++; + if(block->steps_z != 0) z_active++; + if(block->steps_e != 0) e_active++; + block_index = (block_index+1) & (BLOCK_BUFFER_SIZE - 1); + } + } + if((DISABLE_X) && (x_active == 0)) disable_x(); + if((DISABLE_Y) && (y_active == 0)) disable_y(); + if((DISABLE_Z) && (z_active == 0)) disable_z(); + if((DISABLE_E) && (e_active == 0)) disable_e(); +} + +// Add a new linear movement to the buffer. steps_x, _y and _z is the absolute position in +// mm. Microseconds specify how many microseconds the move should take to perform. To aid acceleration +// calculation the caller must also provide the physical length of the line in millimeters. +void plan_buffer_line(float x, float y, float z, float e, float feed_rate) { + + // The target position of the tool in absolute steps + // Calculate target position in absolute steps + long target[4]; + target[X_AXIS] = lround(x*axis_steps_per_unit[X_AXIS]); + target[Y_AXIS] = lround(y*axis_steps_per_unit[Y_AXIS]); + target[Z_AXIS] = lround(z*axis_steps_per_unit[Z_AXIS]); + target[E_AXIS] = lround(e*axis_steps_per_unit[E_AXIS]); + + // Calculate the buffer head after we push this byte + int next_buffer_head = (block_buffer_head + 1) & (BLOCK_BUFFER_SIZE - 1); + + // If the buffer is full: good! That means we are well ahead of the robot. + // Rest here until there is room in the buffer. + while(block_buffer_tail == next_buffer_head) { + manage_heater(); + manage_inactivity(1); + LCD_STATUS; + } + + // Prepare to set up new block + block_t *block = &block_buffer[block_buffer_head]; + + // Mark block as not busy (Not executed by the stepper interrupt) + block->busy = false; + + // Number of steps for each axis + block->steps_x = labs(target[X_AXIS]-position[X_AXIS]); + block->steps_y = labs(target[Y_AXIS]-position[Y_AXIS]); + block->steps_z = labs(target[Z_AXIS]-position[Z_AXIS]); + block->steps_e = labs(target[E_AXIS]-position[E_AXIS]); + block->step_event_count = max(block->steps_x, max(block->steps_y, max(block->steps_z, block->steps_e))); + + // Bail if this is a zero-length block + if (block->step_event_count <=dropsegments) { + return; + }; + + //enable active axes + if(block->steps_x != 0) enable_x(); + if(block->steps_y != 0) enable_y(); + if(block->steps_z != 0) enable_z(); + if(block->steps_e != 0) enable_e(); + + float delta_x_mm = (target[X_AXIS]-position[X_AXIS])/axis_steps_per_unit[X_AXIS]; + float delta_y_mm = (target[Y_AXIS]-position[Y_AXIS])/axis_steps_per_unit[Y_AXIS]; + float delta_z_mm = (target[Z_AXIS]-position[Z_AXIS])/axis_steps_per_unit[Z_AXIS]; + float delta_e_mm = (target[E_AXIS]-position[E_AXIS])/axis_steps_per_unit[E_AXIS]; + block->millimeters = sqrt(square(delta_x_mm) + square(delta_y_mm) + square(delta_z_mm) + square(delta_e_mm)); + + unsigned long microseconds; + + if (block->steps_e == 0) { + if(feed_ratemillimeters/feed_rate)*1000000); + + // slow down when de buffer starts to empty, rather than wait at the corner for a buffer refill + // reduces/removes corner blobs as the machine won't come to a full stop. + int blockcount=(block_buffer_head-block_buffer_tail + BLOCK_BUFFER_SIZE) & (BLOCK_BUFFER_SIZE - 1); + + if ((blockcount>0) && (blockcount < (BLOCK_BUFFER_SIZE - 4))) { + if (microsecondsspeed_z = delta_z_mm * multiplier; + block->speed_x = delta_x_mm * multiplier; + block->speed_y = delta_y_mm * multiplier; + block->speed_e = delta_e_mm * multiplier; + + + // Limit speed per axis + float speed_factor = 1; //factor <=1 do decrease speed + if(abs(block->speed_x) > max_feedrate[X_AXIS]) { + //// [ErikDeBruijn] IS THIS THE BUG WE'RE LOOING FOR???? + //// [bernhard] No its not, according to Zalm. + //// the if would always be true, since tmp_speedfactor <=0 due the inial if, so its safe to set. the next lines actually compare. + speed_factor = max_feedrate[X_AXIS] / abs(block->speed_x); + //if(speed_factor > tmp_speed_factor) speed_factor = tmp_speed_factor; + } + if(abs(block->speed_y) > max_feedrate[Y_AXIS]){ + float tmp_speed_factor = max_feedrate[Y_AXIS] / abs(block->speed_y); + if(speed_factor > tmp_speed_factor) speed_factor = tmp_speed_factor; + } + if(abs(block->speed_z) > max_feedrate[Z_AXIS]){ + float tmp_speed_factor = max_feedrate[Z_AXIS] / abs(block->speed_z); + if(speed_factor > tmp_speed_factor) speed_factor = tmp_speed_factor; + } + if(abs(block->speed_e) > max_feedrate[E_AXIS]){ + float tmp_speed_factor = max_feedrate[E_AXIS] / abs(block->speed_e); + if(speed_factor > tmp_speed_factor) speed_factor = tmp_speed_factor; + } + multiplier = multiplier * speed_factor; + block->speed_z = delta_z_mm * multiplier; + block->speed_x = delta_x_mm * multiplier; + block->speed_y = delta_y_mm * multiplier; + block->speed_e = delta_e_mm * multiplier; + block->nominal_speed = block->millimeters * multiplier; + block->nominal_rate = ceil(block->step_event_count * multiplier / 60); + + if(block->nominal_rate < 120) block->nominal_rate = 120; + block->entry_speed = safe_speed(block); + + // Compute the acceleration rate for the trapezoid generator. + float travel_per_step = block->millimeters/block->step_event_count; + if(block->steps_x == 0 && block->steps_y == 0 && block->steps_z == 0) { + block->acceleration_st = ceil( (retract_acceleration)/travel_per_step); // convert to: acceleration steps/sec^2 + } + else { + block->acceleration_st = ceil( (acceleration)/travel_per_step); // convert to: acceleration steps/sec^2 + float tmp_acceleration = (float)block->acceleration_st / (float)block->step_event_count; + // Limit acceleration per axis + if((tmp_acceleration * block->steps_x) > axis_steps_per_sqr_second[X_AXIS]) { + block->acceleration_st = axis_steps_per_sqr_second[X_AXIS]; + tmp_acceleration = (float)block->acceleration_st / (float)block->step_event_count; + } + if((tmp_acceleration * block->steps_y) > axis_steps_per_sqr_second[Y_AXIS]) { + block->acceleration_st = axis_steps_per_sqr_second[Y_AXIS]; + tmp_acceleration = (float)block->acceleration_st / (float)block->step_event_count; + } + if((tmp_acceleration * block->steps_e) > axis_steps_per_sqr_second[E_AXIS]) { + block->acceleration_st = axis_steps_per_sqr_second[E_AXIS]; + tmp_acceleration = (float)block->acceleration_st / (float)block->step_event_count; + } + if((tmp_acceleration * block->steps_z) > axis_steps_per_sqr_second[Z_AXIS]) { + block->acceleration_st = axis_steps_per_sqr_second[Z_AXIS]; + tmp_acceleration = (float)block->acceleration_st / (float)block->step_event_count; + } + } + block->acceleration = block->acceleration_st * travel_per_step; + block->acceleration_rate = (long)((float)block->acceleration_st * 8.388608); + +#ifdef ADVANCE + // Calculate advance rate + if((block->steps_e == 0) || (block->steps_x == 0 && block->steps_y == 0 && block->steps_z == 0)) { + block->advance_rate = 0; + block->advance = 0; + } + else { + long acc_dist = estimate_acceleration_distance(0, block->nominal_rate, block->acceleration_st); + float advance = (STEPS_PER_CUBIC_MM_E * EXTRUDER_ADVANCE_K) * + (block->speed_e * block->speed_e * EXTRUTION_AREA * EXTRUTION_AREA / 3600.0)*65536; + block->advance = advance; + if(acc_dist == 0) { + block->advance_rate = 0; + } + else { + block->advance_rate = advance / (float)acc_dist; + } + } +#endif // ADVANCE + + // compute a preliminary conservative acceleration trapezoid + float safespeed = safe_speed(block); + calculate_trapezoid_for_block(block, safespeed, safespeed); + + // Compute direction bits for this block + block->direction_bits = 0; + if (target[X_AXIS] < position[X_AXIS]) { + block->direction_bits |= (1<direction_bits |= (1<direction_bits |= (1<direction_bits |= (1<. +*/ + +// This module is to be considered a sub-module of stepper.c. Please don't include +// this file from any other module. + +#ifndef planner_h +#define planner_h + +// This struct is used when buffering the setup for each linear movement "nominal" values are as specified in +// the source g-code and may never actually be reached if acceleration management is active. +typedef struct { + // Fields used by the bresenham algorithm for tracing the line + long steps_x, steps_y, steps_z, steps_e; // Step count along each axis + long step_event_count; // The number of step events required to complete this block + volatile long accelerate_until; // The index of the step event on which to stop acceleration + volatile long decelerate_after; // The index of the step event on which to start decelerating + volatile long acceleration_rate; // The acceleration rate used for acceleration calculation + unsigned char direction_bits; // The direction bit set for this block (refers to *_DIRECTION_BIT in config.h) +#ifdef ADVANCE + long advance_rate; + volatile long initial_advance; + volatile long final_advance; + float advance; +#endif + + // Fields used by the motion planner to manage acceleration + float speed_x, speed_y, speed_z, speed_e; // Nominal mm/minute for each axis + float nominal_speed; // The nominal speed for this block in mm/min + float millimeters; // The total travel of this block in mm + float entry_speed; + float acceleration; // acceleration mm/sec^2 + + // Settings for the trapezoid generator + long nominal_rate; // The nominal step rate for this block in step_events/sec + volatile long initial_rate; // The jerk-adjusted step rate at start of block + volatile long final_rate; // The minimal rate at exit + long acceleration_st; // acceleration steps/sec^2 + volatile char busy; +} block_t; + +// Initialize the motion plan subsystem +void plan_init(); + +// Add a new linear movement to the buffer. x, y and z is the signed, absolute target position in +// millimaters. Feed rate specifies the speed of the motion. +void plan_buffer_line(float x, float y, float z, float e, float feed_rate); + +// Set position. Used for G92 instructions. +void plan_set_position(float x, float y, float z, float e); + +// Called when the current block is no longer needed. Discards the block and makes the memory +// availible for new blocks. +void plan_discard_current_block(); + +// Gets the current block. Returns NULL if buffer empty +block_t *plan_get_current_block(); + +void check_axes_activity(); + +extern unsigned long minsegmenttime; +extern float max_feedrate[4]; // set the max speeds +extern float axis_steps_per_unit[4]; +extern long max_acceleration_units_per_sq_second[4]; // Use M201 to override by software +extern float minimumfeedrate; +extern float acceleration; // Normal acceleration mm/s^2 THIS IS THE DEFAULT ACCELERATION for all moves. M204 SXXXX +extern float retract_acceleration; // mm/s^2 filament pull-pack and push-forward while standing still in the other axis M204 TXXXX +extern float max_xy_jerk; //speed than can be stopped at once, if i understand correctly. +extern float max_z_jerk; +extern float mintravelfeedrate; +extern unsigned long axis_steps_per_sqr_second[NUM_AXIS]; + +#endif diff --git a/Marlin/speed_lookuptable.h b/Marlin/speed_lookuptable.h index 5c54a08d1..43ef89980 100644 --- a/Marlin/speed_lookuptable.h +++ b/Marlin/speed_lookuptable.h @@ -3,7 +3,7 @@ #include -uint16_t speed_lookuptable_fast[256][2] PROGMEM = { +uint16_t speed_lookuptable_fast[256][2] PROGMEM = {\ { 62500, 55556}, { 6944, 3268}, { 3676, 1176}, { 2500, 607}, { 1893, 369}, { 1524, 249}, { 1275, 179}, { 1096, 135}, { 961, 105}, { 856, 85}, { 771, 69}, { 702, 58}, { 644, 49}, { 595, 42}, { 553, 37}, { 516, 32}, { 484, 28}, { 456, 25}, { 431, 23}, { 408, 20}, { 388, 19}, { 369, 16}, { 353, 16}, { 337, 14}, @@ -35,9 +35,9 @@ uint16_t speed_lookuptable_fast[256][2] PROGMEM = { { 34, 0}, { 34, 0}, { 34, 0}, { 34, 0}, { 34, 0}, { 34, 1}, { 33, 0}, { 33, 0}, { 33, 0}, { 33, 0}, { 33, 0}, { 33, 0}, { 33, 1}, { 32, 0}, { 32, 0}, { 32, 0}, { 32, 0}, { 32, 0}, { 32, 0}, { 32, 0}, { 32, 1}, { 31, 0}, { 31, 0}, { 31, 0}, -{ 31, 0}, { 31, 0}, { 31, 0}, { 31, 1}, { 30, 0}, { 30, 0}, { 30, 0}, { 30, 0}, +{ 31, 0}, { 31, 0}, { 31, 0}, { 31, 1}, { 30, 0}, { 30, 0}, { 30, 0}, { 30, 0} }; -uint16_t speed_lookuptable_slow[256][2] PROGMEM = { +uint16_t speed_lookuptable_slow[256][2] PROGMEM = {\ { 62500, 12500}, { 50000, 8334}, { 41666, 5952}, { 35714, 4464}, { 31250, 3473}, { 27777, 2777}, { 25000, 2273}, { 22727, 1894}, { 20833, 1603}, { 19230, 1373}, { 17857, 1191}, { 16666, 1041}, { 15625, 920}, { 14705, 817}, { 13888, 731}, { 13157, 657}, { 12500, 596}, { 11904, 541}, { 11363, 494}, { 10869, 453}, { 10416, 416}, { 10000, 385}, { 9615, 356}, { 9259, 331}, @@ -69,7 +69,7 @@ uint16_t speed_lookuptable_slow[256][2] PROGMEM = { { 1096, 5}, { 1091, 5}, { 1086, 4}, { 1082, 5}, { 1077, 5}, { 1072, 4}, { 1068, 5}, { 1063, 4}, { 1059, 5}, { 1054, 4}, { 1050, 4}, { 1046, 5}, { 1041, 4}, { 1037, 4}, { 1033, 5}, { 1028, 4}, { 1024, 4}, { 1020, 4}, { 1016, 4}, { 1012, 4}, { 1008, 4}, { 1004, 4}, { 1000, 4}, { 996, 4}, -{ 992, 4}, { 988, 4}, { 984, 4}, { 980, 4}, { 976, 4}, { 972, 4}, { 968, 3}, { 965, 3}, +{ 992, 4}, { 988, 4}, { 984, 4}, { 980, 4}, { 976, 4}, { 972, 4}, { 968, 3}, { 965, 3} }; #endif diff --git a/Marlin/stepper.cpp b/Marlin/stepper.cpp new file mode 100644 index 000000000..cd68bae0d --- /dev/null +++ b/Marlin/stepper.cpp @@ -0,0 +1,592 @@ +/* + stepper.c - stepper motor driver: executes motion plans using stepper motors + Part of Grbl + + Copyright (c) 2009-2011 Simen Svale Skogsrud + + Grbl is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Grbl is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Grbl. If not, see . +*/ + +/* The timer calculations of this module informed by the 'RepRap cartesian firmware' by Zack Smith + and Philipp Tiefenbacher. */ + +#include "stepper.h" +#include "Configuration.h" +#include "Marlin.h" +#include "planner.h" +#include "pins.h" +#include "fastio.h" +#include "temperature.h" +#include "ultralcd.h" + +#include "speed_lookuptable.h" + +// if DEBUG_STEPS is enabled, M114 can be used to compare two methods of determining the X,Y,Z position of the printer. +// for debugging purposes only, should be disabled by default +#ifdef DEBUG_STEPS +volatile long count_position[NUM_AXIS] = { 0, 0, 0, 0}; +volatile int count_direction[NUM_AXIS] = { 1, 1, 1, 1}; +#endif + + +// intRes = intIn1 * intIn2 >> 16 +// uses: +// r26 to store 0 +// r27 to store the byte 1 of the 24 bit result +#define MultiU16X8toH16(intRes, charIn1, intIn2) \ +asm volatile ( \ +"clr r26 \n\t" \ +"mul %A1, %B2 \n\t" \ +"movw %A0, r0 \n\t" \ +"mul %A1, %A2 \n\t" \ +"add %A0, r1 \n\t" \ +"adc %B0, r26 \n\t" \ +"lsr r0 \n\t" \ +"adc %A0, r26 \n\t" \ +"adc %B0, r26 \n\t" \ +"clr r1 \n\t" \ +: \ +"=&r" (intRes) \ +: \ +"d" (charIn1), \ +"d" (intIn2) \ +: \ +"r26" \ +) + +// intRes = longIn1 * longIn2 >> 24 +// uses: +// r26 to store 0 +// r27 to store the byte 1 of the 48bit result +#define MultiU24X24toH16(intRes, longIn1, longIn2) \ +asm volatile ( \ +"clr r26 \n\t" \ +"mul %A1, %B2 \n\t" \ +"mov r27, r1 \n\t" \ +"mul %B1, %C2 \n\t" \ +"movw %A0, r0 \n\t" \ +"mul %C1, %C2 \n\t" \ +"add %B0, r0 \n\t" \ +"mul %C1, %B2 \n\t" \ +"add %A0, r0 \n\t" \ +"adc %B0, r1 \n\t" \ +"mul %A1, %C2 \n\t" \ +"add r27, r0 \n\t" \ +"adc %A0, r1 \n\t" \ +"adc %B0, r26 \n\t" \ +"mul %B1, %B2 \n\t" \ +"add r27, r0 \n\t" \ +"adc %A0, r1 \n\t" \ +"adc %B0, r26 \n\t" \ +"mul %C1, %A2 \n\t" \ +"add r27, r0 \n\t" \ +"adc %A0, r1 \n\t" \ +"adc %B0, r26 \n\t" \ +"mul %B1, %A2 \n\t" \ +"add r27, r1 \n\t" \ +"adc %A0, r26 \n\t" \ +"adc %B0, r26 \n\t" \ +"lsr r27 \n\t" \ +"adc %A0, r26 \n\t" \ +"adc %B0, r26 \n\t" \ +"clr r1 \n\t" \ +: \ +"=&r" (intRes) \ +: \ +"d" (longIn1), \ +"d" (longIn2) \ +: \ +"r26" , "r27" \ +) + +// Some useful constants + +#define ENABLE_STEPPER_DRIVER_INTERRUPT() TIMSK1 |= (1< +// +// The trapezoid is the shape the speed curve over time. It starts at block->initial_rate, accelerates +// first block->accelerate_until step_events_completed, then keeps going at constant speed until +// step_events_completed reaches block->decelerate_after after which it decelerates until the trapezoid generator is reset. +// The slope of acceleration is calculated with the leib ramp alghorithm. + +void st_wake_up() { + // TCNT1 = 0; + ENABLE_STEPPER_DRIVER_INTERRUPT(); +} + +inline unsigned short calc_timer(unsigned short step_rate) { + unsigned short timer; + if(step_rate > MAX_STEP_FREQUENCY) step_rate = MAX_STEP_FREQUENCY; + + if(step_rate > 20000) { // If steprate > 20kHz >> step 4 times + step_rate = step_rate >> 2; + step_loops = 4; + } + else if(step_rate > 10000) { // If steprate > 10kHz >> step 2 times + step_rate = step_rate >> 1; + step_loops = 2; + } + else { + step_loops = 1; + } + + if(step_rate < 32) step_rate = 32; + step_rate -= 32; // Correct for minimal speed + if(step_rate >= (8*256)){ // higher step rate + unsigned short table_address = (unsigned short)&speed_lookuptable_fast[(unsigned char)(step_rate>>8)][0]; + unsigned char tmp_step_rate = (step_rate & 0x00ff); + unsigned short gain = (unsigned short)pgm_read_word_near(table_address+2); + MultiU16X8toH16(timer, tmp_step_rate, gain); + timer = (unsigned short)pgm_read_word_near(table_address) - timer; + } + else { // lower step rates + unsigned short table_address = (unsigned short)&speed_lookuptable_slow[0][0]; + table_address += ((step_rate)>>1) & 0xfffc; + timer = (unsigned short)pgm_read_word_near(table_address); + timer -= (((unsigned short)pgm_read_word_near(table_address+2) * (unsigned char)(step_rate & 0x0007))>>3); + } + if(timer < 100) timer = 100; + return timer; +} + +// Initializes the trapezoid generator from the current block. Called whenever a new +// block begins. +inline void trapezoid_generator_reset() { +#ifdef ADVANCE + advance = current_block->initial_advance; + final_advance = current_block->final_advance; +#endif + deceleration_time = 0; + // advance_rate = current_block->advance_rate; + // step_rate to timer interval + acc_step_rate = current_block->initial_rate; + acceleration_time = calc_timer(acc_step_rate); + OCR1A = acceleration_time; +} + +// "The Stepper Driver Interrupt" - This timer interrupt is the workhorse. +// It pops blocks from the block_buffer and executes them by pulsing the stepper pins appropriately. +ISR(TIMER1_COMPA_vect) +{ + if(busy){ Serial.print(*(unsigned short *)OCR1A); Serial.println(" BUSY"); + return; + } // The busy-flag is used to avoid reentering this interrupt + + busy = true; + sei(); // Re enable interrupts (normally disabled while inside an interrupt handler) + + // If there is no current block, attempt to pop one from the buffer + if (current_block == NULL) { + // Anything in the buffer? + current_block = plan_get_current_block(); + if (current_block != NULL) { + trapezoid_generator_reset(); + counter_x = -(current_block->step_event_count >> 1); + counter_y = counter_x; + counter_z = counter_x; + counter_e = counter_x; + step_events_completed = 0; + #ifdef ADVANCE + e_steps = 0; + #endif + } + else { +// DISABLE_STEPPER_DRIVER_INTERRUPT(); + } + } + + if (current_block != NULL) { + // Set directions TO DO This should be done once during init of trapezoid. Endstops -> interrupt + out_bits = current_block->direction_bits; + +#ifdef ADVANCE + // Calculate E early. + counter_e += current_block->steps_e; + if (counter_e > 0) { + counter_e -= current_block->step_event_count; + if ((out_bits & (1<> 16) - old_advance); + CRITICAL_SECTION_END; + old_advance = advance >> 16; +#endif //ADVANCE + + // Set direction en check limit switches +if ((out_bits & (1< -1 + if(READ(X_MIN_PIN) != ENDSTOPS_INVERTING) { + step_events_completed = current_block->step_event_count; + } +#endif + } + else { // +direction + WRITE(X_DIR_PIN,!INVERT_X_DIR); + #ifdef DEBUG_STEPS + count_direction[X_AXIS]=1; + #endif +#if X_MAX_PIN > -1 + if((READ(X_MAX_PIN) != ENDSTOPS_INVERTING) && (current_block->steps_x >0)){ + step_events_completed = current_block->step_event_count; + } +#endif + } + + if ((out_bits & (1< -1 + if(READ(Y_MIN_PIN) != ENDSTOPS_INVERTING) { + step_events_completed = current_block->step_event_count; + } +#endif + } + else { // +direction + WRITE(Y_DIR_PIN,!INVERT_Y_DIR); + #ifdef DEBUG_STEPS + count_direction[Y_AXIS]=1; + #endif +#if Y_MAX_PIN > -1 + if((READ(Y_MAX_PIN) != ENDSTOPS_INVERTING) && (current_block->steps_y >0)){ + step_events_completed = current_block->step_event_count; + } +#endif + } + + if ((out_bits & (1< -1 + if(READ(Z_MIN_PIN) != ENDSTOPS_INVERTING) { + step_events_completed = current_block->step_event_count; + } +#endif + } + else { // +direction + WRITE(Z_DIR_PIN,!INVERT_Z_DIR); + #ifdef DEBUG_STEPS + count_direction[Z_AXIS]=1; + #endif +#if Z_MAX_PIN > -1 + if((READ(Z_MAX_PIN) != ENDSTOPS_INVERTING) && (current_block->steps_z >0)){ + step_events_completed = current_block->step_event_count; + } +#endif + } + +#ifndef ADVANCE + if ((out_bits & (1<steps_x; + if (counter_x > 0) { + WRITE(X_STEP_PIN, HIGH); + counter_x -= current_block->step_event_count; + WRITE(X_STEP_PIN, LOW); + #ifdef DEBUG_STEPS + count_position[X_AXIS]+=count_direction[X_AXIS]; + #endif + } + + counter_y += current_block->steps_y; + if (counter_y > 0) { + WRITE(Y_STEP_PIN, HIGH); + counter_y -= current_block->step_event_count; + WRITE(Y_STEP_PIN, LOW); + #ifdef DEBUG_STEPS + count_position[Y_AXIS]+=count_direction[Y_AXIS]; + #endif + } + + counter_z += current_block->steps_z; + if (counter_z > 0) { + WRITE(Z_STEP_PIN, HIGH); + counter_z -= current_block->step_event_count; + WRITE(Z_STEP_PIN, LOW); + #ifdef DEBUG_STEPS + count_position[Z_AXIS]+=count_direction[Z_AXIS]; + #endif + } + +#ifndef ADVANCE + counter_e += current_block->steps_e; + if (counter_e > 0) { + WRITE(E_STEP_PIN, HIGH); + counter_e -= current_block->step_event_count; + WRITE(E_STEP_PIN, LOW); + } +#endif //!ADVANCE + step_events_completed += 1; + if(step_events_completed >= current_block->step_event_count) break; + } + // Calculare new timer value + unsigned short timer; + unsigned short step_rate; + if (step_events_completed <= current_block->accelerate_until) { + MultiU24X24toH16(acc_step_rate, acceleration_time, current_block->acceleration_rate); + acc_step_rate += current_block->initial_rate; + + // upper limit + if(acc_step_rate > current_block->nominal_rate) + acc_step_rate = current_block->nominal_rate; + + // step_rate to timer interval + timer = calc_timer(acc_step_rate); +#ifdef ADVANCE + advance += advance_rate; +#endif + acceleration_time += timer; + OCR1A = timer; + } + else if (step_events_completed > current_block->decelerate_after) { + MultiU24X24toH16(step_rate, deceleration_time, current_block->acceleration_rate); + + if(step_rate > acc_step_rate) { // Check step_rate stays positive + step_rate = current_block->final_rate; + } + else { + step_rate = acc_step_rate - step_rate; // Decelerate from aceleration end point. + } + + // lower limit + if(step_rate < current_block->final_rate) + step_rate = current_block->final_rate; + + // step_rate to timer interval + timer = calc_timer(step_rate); +#ifdef ADVANCE + advance -= advance_rate; + if(advance < final_advance) + advance = final_advance; +#endif //ADVANCE + deceleration_time += timer; + OCR1A = timer; + } + // If current block is finished, reset pointer + if (step_events_completed >= current_block->step_event_count) { + current_block = NULL; + plan_discard_current_block(); + } + } + cli(); // disable interrupts + busy=false; +} + +#ifdef ADVANCE + +unsigned char old_OCR0A; +// Timer interrupt for E. e_steps is set in the main routine; +// Timer 0 is shared with millies +ISR(TIMER0_COMPA_vect) +{ + // Critical section needed because Timer 1 interrupt has higher priority. + // The pin set functions are placed on trategic position to comply with the stepper driver timing. + WRITE(E_STEP_PIN, LOW); + // Set E direction (Depends on E direction + advance) + if (e_steps < 0) { + WRITE(E_DIR_PIN,INVERT_E_DIR); + e_steps++; + WRITE(E_STEP_PIN, HIGH); + } + if (e_steps > 0) { + WRITE(E_DIR_PIN,!INVERT_E_DIR); + e_steps--; + WRITE(E_STEP_PIN, HIGH); + } + old_OCR0A += 25; // 10kHz interrupt + OCR0A = old_OCR0A; +} +#endif // ADVANCE + +void st_init() +{ + //Initialize Dir Pins +#if X_DIR_PIN > -1 + SET_OUTPUT(X_DIR_PIN); +#endif +#if Y_DIR_PIN > -1 + SET_OUTPUT(Y_DIR_PIN); +#endif +#if Z_DIR_PIN > -1 + SET_OUTPUT(Z_DIR_PIN); +#endif +#if E_DIR_PIN > -1 + SET_OUTPUT(E_DIR_PIN); +#endif + + //Initialize Enable Pins - steppers default to disabled. + +#if (X_ENABLE_PIN > -1) + SET_OUTPUT(X_ENABLE_PIN); + if(!X_ENABLE_ON) WRITE(X_ENABLE_PIN,HIGH); +#endif +#if (Y_ENABLE_PIN > -1) + SET_OUTPUT(Y_ENABLE_PIN); + if(!Y_ENABLE_ON) WRITE(Y_ENABLE_PIN,HIGH); +#endif +#if (Z_ENABLE_PIN > -1) + SET_OUTPUT(Z_ENABLE_PIN); + if(!Z_ENABLE_ON) WRITE(Z_ENABLE_PIN,HIGH); +#endif +#if (E_ENABLE_PIN > -1) + SET_OUTPUT(E_ENABLE_PIN); + if(!E_ENABLE_ON) WRITE(E_ENABLE_PIN,HIGH); +#endif + + //endstops and pullups +#ifdef ENDSTOPPULLUPS +#if X_MIN_PIN > -1 + SET_INPUT(X_MIN_PIN); + WRITE(X_MIN_PIN,HIGH); +#endif +#if X_MAX_PIN > -1 + SET_INPUT(X_MAX_PIN); + WRITE(X_MAX_PIN,HIGH); +#endif +#if Y_MIN_PIN > -1 + SET_INPUT(Y_MIN_PIN); + WRITE(Y_MIN_PIN,HIGH); +#endif +#if Y_MAX_PIN > -1 + SET_INPUT(Y_MAX_PIN); + WRITE(Y_MAX_PIN,HIGH); +#endif +#if Z_MIN_PIN > -1 + SET_INPUT(Z_MIN_PIN); + WRITE(Z_MIN_PIN,HIGH); +#endif +#if Z_MAX_PIN > -1 + SET_INPUT(Z_MAX_PIN); + WRITE(Z_MAX_PIN,HIGH); +#endif +#else //ENDSTOPPULLUPS +#if X_MIN_PIN > -1 + SET_INPUT(X_MIN_PIN); +#endif +#if X_MAX_PIN > -1 + SET_INPUT(X_MAX_PIN); +#endif +#if Y_MIN_PIN > -1 + SET_INPUT(Y_MIN_PIN); +#endif +#if Y_MAX_PIN > -1 + SET_INPUT(Y_MAX_PIN); +#endif +#if Z_MIN_PIN > -1 + SET_INPUT(Z_MIN_PIN); +#endif +#if Z_MAX_PIN > -1 + SET_INPUT(Z_MAX_PIN); +#endif +#endif //ENDSTOPPULLUPS + + + //Initialize Step Pins +#if (X_STEP_PIN > -1) + SET_OUTPUT(X_STEP_PIN); +#endif +#if (Y_STEP_PIN > -1) + SET_OUTPUT(Y_STEP_PIN); +#endif +#if (Z_STEP_PIN > -1) + SET_OUTPUT(Z_STEP_PIN); +#endif +#if (E_STEP_PIN > -1) + SET_OUTPUT(E_STEP_PIN); +#endif + + // waveform generation = 0100 = CTC + TCCR1B &= ~(1<. +*/ + +#ifndef stepper_h +#define stepper_h +// Initialize and start the stepper motor subsystem +void st_init(); + +// Block until all buffered steps are executed +void st_synchronize(); + +// The stepper subsystem goes to sleep when it runs out of things to execute. Call this +// to notify the subsystem that it is time to go to work. +void st_wake_up(); + +// if DEBUG_STEPS is enabled, M114 can be used to compare two methods of determining the X,Y,Z position of the printer. +// for debugging purposes only, should be disabled by default +#ifdef DEBUG_STEPS +extern volatile long count_position[NUM_AXIS]; +extern volatile int count_direction[NUM_AXIS]; +#endif + +#endif diff --git a/Marlin/streaming.h b/Marlin/streaming.h new file mode 100644 index 000000000..2abf64f14 --- /dev/null +++ b/Marlin/streaming.h @@ -0,0 +1,84 @@ +/* +Streaming.h - Arduino library for supporting the << streaming operator +Copyright (c) 2010 Mikal Hart. All rights reserved. + +This library is free software; you can redistribute it and/or +modify it under the terms of the GNU Lesser General Public +License as published by the Free Software Foundation; either +version 2.1 of the License, or (at your option) any later version. + +This library is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +Lesser General Public License for more details. + +You should have received a copy of the GNU Lesser General Public +License along with this library; if not, write to the Free Software +Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef ARDUINO_STREAMING +#define ARDUINO_STREAMING + +//#include + +#define STREAMING_LIBRARY_VERSION 4 + +// Generic template +template +inline Print &operator <<(Print &stream, T arg) +{ stream.print(arg); return stream; } + +struct _BASED +{ + long val; + int base; + _BASED(long v, int b): val(v), base(b) + {} +}; + +#define _HEX(a) _BASED(a, HEX) +#define _DEC(a) _BASED(a, DEC) +#define _OCT(a) _BASED(a, OCT) +#define _BIN(a) _BASED(a, BIN) +#define _BYTE(a) _BASED(a, BYTE) + +// Specialization for class _BASED +// Thanks to Arduino forum user Ben Combee who suggested this +// clever technique to allow for expressions like +// Serial << _HEX(a); + +inline Print &operator <<(Print &obj, const _BASED &arg) +{ obj.print(arg.val, arg.base); return obj; } + +#if ARDUINO >= 18 +// Specialization for class _FLOAT +// Thanks to Michael Margolis for suggesting a way +// to accommodate Arduino 0018's floating point precision +// feature like this: +// Serial << _FLOAT(gps_latitude, 6); // 6 digits of precision + +struct _FLOAT +{ + float val; + int digits; + _FLOAT(double v, int d): val(v), digits(d) + {} +}; + +inline Print &operator <<(Print &obj, const _FLOAT &arg) +{ obj.print(arg.val, arg.digits); return obj; } +#endif + +// Specialization for enum _EndLineCode +// Thanks to Arduino forum user Paul V. who suggested this +// clever technique to allow for expressions like +// Serial << "Hello!" << endl; + +enum _EndLineCode { endl }; + +inline Print &operator <<(Print &obj, _EndLineCode arg) +{ obj.println(); return obj; } + +#endif + diff --git a/Marlin/temperature.cpp b/Marlin/temperature.cpp new file mode 100644 index 000000000..248b807fd --- /dev/null +++ b/Marlin/temperature.cpp @@ -0,0 +1,476 @@ +/* + temperature.c - temperature control + Part of Marlin + + Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . + */ + +/* + This firmware is a mashup between Sprinter and grbl. + (https://github.com/kliment/Sprinter) + (https://github.com/simen/grbl/tree) + + It has preliminary support for Matthew Roberts advance algorithm + http://reprap.org/pipermail/reprap-dev/2011-May/003323.html + + This firmware is optimized for gen6 electronics. + */ + +#include "fastio.h" +#include "Configuration.h" +#include "pins.h" +#include "Marlin.h" +#include "ultralcd.h" +#include "streaming.h" +#include "temperature.h" + +int target_bed_raw = 0; +int current_bed_raw = 0; + +int target_raw[3] = {0, 0, 0}; +int current_raw[3] = {0, 0, 0}; +unsigned char temp_meas_ready = false; + +unsigned long previous_millis_heater, previous_millis_bed_heater; + +#ifdef PIDTEMP + double temp_iState = 0; + double temp_dState = 0; + double pTerm; + double iTerm; + double dTerm; + //int output; + double pid_error; + double temp_iState_min; + double temp_iState_max; + double pid_setpoint = 0.0; + double pid_input; + double pid_output; + bool pid_reset; + float HeaterPower; + + float Kp=DEFAULT_Kp; + float Ki=DEFAULT_Ki; + float Kd=DEFAULT_Kd; + float Kc=DEFAULT_Kc; +#endif //PIDTEMP + +#ifdef MINTEMP +int minttemp = temp2analog(MINTEMP); +#endif //MINTEMP +#ifdef MAXTEMP +int maxttemp = temp2analog(MAXTEMP); +#endif //MAXTEMP + +#ifdef BED_MINTEMP +int bed_minttemp = temp2analog(BED_MINTEMP); +#endif //BED_MINTEMP +#ifdef BED_MAXTEMP +int bed_maxttemp = temp2analog(BED_MAXTEMP); +#endif //BED_MAXTEMP + +void manage_heater() +{ +#ifdef USE_WATCHDOG + wd_reset(); +#endif + + float pid_input; + float pid_output; + if(temp_meas_ready == true) { + +CRITICAL_SECTION_START; + temp_meas_ready = false; +CRITICAL_SECTION_END; + +#ifdef PIDTEMP + pid_input = analog2temp(current_raw[0]); + +#ifndef PID_OPENLOOP + pid_error = pid_setpoint - pid_input; + if(pid_error > 10){ + pid_output = PID_MAX; + pid_reset = true; + } + else if(pid_error < -10) { + pid_output = 0; + pid_reset = true; + } + else { + if(pid_reset == true) { + temp_iState = 0.0; + pid_reset = false; + } + pTerm = Kp * pid_error; + temp_iState += pid_error; + temp_iState = constrain(temp_iState, temp_iState_min, temp_iState_max); + iTerm = Ki * temp_iState; + #define K1 0.95 + #define K2 (1.0-K1) + dTerm = (Kd * (pid_input - temp_dState))*K2 + (K1 * dTerm); + temp_dState = pid_input; + pid_output = constrain(pTerm + iTerm - dTerm, 0, PID_MAX); + } +#endif //PID_OPENLOOP +#ifdef PID_DEBUG + Serial.print(" Input "); + Serial.print(pid_input); + Serial.print(" Output "); + Serial.print(pid_output); + Serial.print(" pTerm "); + Serial.print(pTerm); + Serial.print(" iTerm "); + Serial.print(iTerm); + Serial.print(" dTerm "); + Serial.print(dTerm); + Serial.println(); +#endif //PID_DEBUG + analogWrite(HEATER_0_PIN, pid_output); +#endif //PIDTEMP + +#ifndef PIDTEMP + if(current_raw[0] >= target_raw[0]) + { + WRITE(HEATER_0_PIN,LOW); + } + else + { + WRITE(HEATER_0_PIN,HIGH); + } +#endif + + if(millis() - previous_millis_bed_heater < BED_CHECK_INTERVAL) + return; + previous_millis_bed_heater = millis(); + + #if TEMP_1_PIN > -1 + if(current_raw[1] >= target_raw[1]) + { + WRITE(HEATER_1_PIN,LOW); + } + else + { + WRITE(HEATER_1_PIN,HIGH); + } + #endif + } +} + +// Takes hot end temperature value as input and returns corresponding raw value. +// For a thermistor, it uses the RepRap thermistor temp table. +// This is needed because PID in hydra firmware hovers around a given analog value, not a temp value. +// This function is derived from inversing the logic from a portion of getTemperature() in FiveD RepRap firmware. +float temp2analog(int celsius) { + #ifdef HEATER_USES_THERMISTOR + int raw = 0; + byte i; + + for (i=1; i raw) + { + celsius = temptable[i-1][1] + + (raw - temptable[i-1][0]) * + (temptable[i][1] - temptable[i-1][1]) / + (temptable[i][0] - temptable[i-1][0]); + + break; + } + } + + // Overflow: Set to last value in the table + if (i == NUMTEMPS) celsius = temptable[i-1][1]; + + return celsius; + #elif defined HEATER_USES_AD595 + return raw * ((5.0 * 100.0) / 1024.0) / OVERSAMPLENR; + #endif +} + +// Derived from RepRap FiveD extruder::getTemperature() +// For bed temperature measurement. +float analog2tempBed(int raw) { + #ifdef BED_USES_THERMISTOR + int celsius = 0; + byte i; + + raw = (1023 * OVERSAMPLENR) - raw; + + for (i=1; i raw) + { + celsius = bedtemptable[i-1][1] + + (raw - bedtemptable[i-1][0]) * + (bedtemptable[i][1] - bedtemptable[i-1][1]) / + (bedtemptable[i][0] - bedtemptable[i-1][0]); + + break; + } + } + + // Overflow: Set to last value in the table + if (i == NUMTEMPS) celsius = bedtemptable[i-1][1]; + + return celsius; + + #elif defined BED_USES_AD595 + return raw * ((5.0 * 100.0) / 1024.0) / OVERSAMPLENR; + #endif +} + +void tp_init() +{ +#if (HEATER_0_PIN > -1) + SET_OUTPUT(HEATER_0_PIN); +#endif +#if (HEATER_1_PIN > -1) + SET_OUTPUT(HEATER_1_PIN); +#endif +#if (HEATER_2_PIN > -1) + SET_OUTPUT(HEATER_2_PIN); +#endif + +#ifdef PIDTEMP + temp_iState_min = 0.0; + temp_iState_max = PID_INTEGRAL_DRIVE_MAX / Ki; +#endif //PIDTEMP + +// Set analog inputs + ADCSRA = 1< -1) + #if TEMP_0_PIN < 8 + DIDR0 = 1 << TEMP_0_PIN; + #else + DIDR2 = 1<<(TEMP_0_PIN - 8); + ADCSRB = 1< -1) + raw_temp_0_value += ADC; + #endif + temp_state = 2; + break; + case 2: // Prepare TEMP_1 + #if (TEMP_1_PIN > -1) + #if TEMP_1_PIN < 7 + DIDR0 = 1< -1) + raw_temp_1_value += ADC; + #endif + temp_state = 4; + break; + case 4: // Prepare TEMP_2 + #if (TEMP_2_PIN > -1) + #if TEMP_2_PIN < 7 + DIDR0 = 1 << TEMP_2_PIN; + #else + DIDR2 = 1<<(TEMP_2_PIN - 8); + ADCSRB = 1< -1) + raw_temp_2_value += ADC; + #endif + temp_state = 0; + temp_count++; + break; + default: + Serial.println("!! Temp measurement error !!"); + break; + } + + if(temp_count >= 16) // 6 ms * 16 = 96ms. + { + #ifdef HEATER_USES_AD595 + current_raw[0] = raw_temp_0_value; + current_raw[2] = raw_temp_2_value; + #else + current_raw[0] = 16383 - raw_temp_0_value; + current_raw[2] = 16383 - raw_temp_2_value; + #endif + + #ifdef BED_USES_AD595 + current_raw[1] = raw_temp_1_value; + #else + current_raw[1] = 16383 - raw_temp_1_value; + #endif + + temp_meas_ready = true; + temp_count = 0; + raw_temp_0_value = 0; + raw_temp_1_value = 0; + raw_temp_2_value = 0; +#ifdef MAXTEMP + #if (HEATER_0_PIN > -1) + if(current_raw[0] >= maxttemp) { + target_raw[0] = 0; + analogWrite(HEATER_0_PIN, 0); + Serial.println("!! Temperature extruder 0 switched off. MAXTEMP triggered !!"); + } + #endif + #if (HEATER_2_PIN > -1) + if(current_raw[2] >= maxttemp) { + target_raw[2] = 0; + analogWrite(HEATER_2_PIN, 0); + Serial.println("!! Temperature extruder 1 switched off. MAXTEMP triggered !!"); + } + #endif +#endif //MAXTEMP +#ifdef MINTEMP + #if (HEATER_0_PIN > -1) + if(current_raw[0] <= minttemp) { + target_raw[0] = 0; + analogWrite(HEATER_0_PIN, 0); + Serial.println("!! Temperature extruder 0 switched off. MINTEMP triggered !!"); + } + #endif + #if (HEATER_2_PIN > -1) + if(current_raw[2] <= minttemp) { + target_raw[2] = 0; + analogWrite(HEATER_2_PIN, 0); + Serial.println("!! Temperature extruder 1 switched off. MINTEMP triggered !!"); + } + #endif +#endif //MAXTEMP +#ifdef BED_MINTEMP + #if (HEATER_1_PIN > -1) + if(current_raw[1] <= bed_minttemp) { + target_raw[1] = 0; + WRITE(HEATER_1_PIN, 0); + Serial.println("!! Temperatur heated bed switched off. MINTEMP triggered !!"); + } + #endif +#endif +#ifdef BED_MAXTEMP + #if (HEATER_1_PIN > -1) + if(current_raw[1] >= bed_maxttemp) { + target_raw[1] = 0; + WRITE(HEATER_1_PIN, 0); + Serial.println("!! Temperature heated bed switched off. MAXTEMP triggered !!"); + } + #endif +#endif + } +} diff --git a/Marlin/temperature.h b/Marlin/temperature.h new file mode 100644 index 000000000..986aca999 --- /dev/null +++ b/Marlin/temperature.h @@ -0,0 +1,55 @@ +/* + temperature.h - temperature controller + Part of Marlin + + Copyright (c) 2011 Erik van der Zalm + + Grbl is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Grbl is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Grbl. If not, see . +*/ + +#ifndef temperature_h +#define temperature_h + +void manage_inactivity(byte debug); + +void tp_init(); +void manage_heater(); +//int temp2analogu(int celsius, const short table[][2], int numtemps); +//float analog2tempu(int raw, const short table[][2], int numtemps); +float temp2analog(int celsius); +float temp2analogBed(int celsius); +float analog2temp(int raw); +float analog2tempBed(int raw); + +#ifdef HEATER_USES_THERMISTOR + #define HEATERSOURCE 1 +#endif +#ifdef BED_USES_THERMISTOR + #define BEDSOURCE 1 +#endif + +//#define temp2analogh( c ) temp2analogu((c),temptable,NUMTEMPS) +//#define analog2temp( c ) analog2tempu((c),temptable,NUMTEMPS + + +extern float Kp; +extern float Ki; +extern float Kd; +extern float Kc; + +extern int target_raw[3]; +extern int current_raw[3]; +extern double pid_setpoint; + +#endif diff --git a/Marlin/thermistortables.h b/Marlin/thermistortables.h index 1c780020b..725e972fa 100644 --- a/Marlin/thermistortables.h +++ b/Marlin/thermistortables.h @@ -1,132 +1,133 @@ #ifndef THERMISTORTABLES_H_ #define THERMISTORTABLES_H_ +#define OVERSAMPLENR 16 #if (THERMISTORHEATER == 1) || (THERMISTORBED == 1) //100k bed thermistor #define NUMTEMPS_1 61 const short temptable_1[NUMTEMPS_1][2] = { -{ (23*16) , 300 }, -{ (25*16) , 295 }, -{ (27*16) , 290 }, -{ (28*16) , 285 }, -{ (31*16) , 280 }, -{ (33*16) , 275 }, -{ (35*16) , 270 }, -{ (38*16) , 265 }, -{ (41*16) , 260 }, -{ (44*16) , 255 }, -{ (48*16) , 250 }, -{ (52*16) , 245 }, -{ (56*16) , 240 }, -{ (61*16) , 235 }, -{ (66*16) , 230 }, -{ (71*16) , 225 }, -{ (78*16) , 220 }, -{ (84*16) , 215 }, -{ (92*16) , 210 }, -{ (100*16), 205 }, -{ (109*16), 200 }, -{ (120*16), 195 }, -{ (131*16), 190 }, -{ (143*16), 185 }, -{ (156*16), 180 }, -{ (171*16), 175 }, -{ (187*16), 170 }, -{ (205*16), 165 }, -{ (224*16), 160 }, -{ (245*16), 155 }, -{ (268*16), 150 }, -{ (293*16), 145 }, -{ (320*16), 140 }, -{ (348*16), 135 }, -{ (379*16), 130 }, -{ (411*16), 125 }, -{ (445*16), 120 }, -{ (480*16), 115 }, -{ (516*16), 110 }, -{ (553*16), 105 }, -{ (591*16), 100 }, -{ (628*16), 95 }, -{ (665*16), 90 }, -{ (702*16), 85 }, -{ (737*16), 80 }, -{ (770*16), 75 }, -{ (801*16), 70 }, -{ (830*16), 65 }, -{ (857*16), 60 }, -{ (881*16), 55 }, -{ (903*16), 50 }, -{ (922*16), 45 }, -{ (939*16), 40 }, -{ (954*16), 35 }, -{ (966*16), 30 }, -{ (977*16), 25 }, -{ (985*16), 20 }, -{ (993*16), 15 }, -{ (999*16), 10 }, -{ (1004*16), 5 }, -{ (1008*16), 0 } //safety +{ (23*OVERSAMPLENR) , 300 }, +{ (25*OVERSAMPLENR) , 295 }, +{ (27*OVERSAMPLENR) , 290 }, +{ (28*OVERSAMPLENR) , 285 }, +{ (31*OVERSAMPLENR) , 280 }, +{ (33*OVERSAMPLENR) , 275 }, +{ (35*OVERSAMPLENR) , 270 }, +{ (38*OVERSAMPLENR) , 265 }, +{ (41*OVERSAMPLENR) , 260 }, +{ (44*OVERSAMPLENR) , 255 }, +{ (48*OVERSAMPLENR) , 250 }, +{ (52*OVERSAMPLENR) , 245 }, +{ (56*OVERSAMPLENR) , 240 }, +{ (61*OVERSAMPLENR) , 235 }, +{ (66*OVERSAMPLENR) , 230 }, +{ (71*OVERSAMPLENR) , 225 }, +{ (78*OVERSAMPLENR) , 220 }, +{ (84*OVERSAMPLENR) , 215 }, +{ (92*OVERSAMPLENR) , 210 }, +{ (100*OVERSAMPLENR), 205 }, +{ (109*OVERSAMPLENR), 200 }, +{ (120*OVERSAMPLENR), 195 }, +{ (131*OVERSAMPLENR), 190 }, +{ (143*OVERSAMPLENR), 185 }, +{ (156*OVERSAMPLENR), 180 }, +{ (171*OVERSAMPLENR), 175 }, +{ (187*OVERSAMPLENR), 170 }, +{ (205*OVERSAMPLENR), 165 }, +{ (224*OVERSAMPLENR), 160 }, +{ (245*OVERSAMPLENR), 155 }, +{ (268*OVERSAMPLENR), 150 }, +{ (293*OVERSAMPLENR), 145 }, +{ (320*OVERSAMPLENR), 140 }, +{ (348*OVERSAMPLENR), 135 }, +{ (379*OVERSAMPLENR), 130 }, +{ (411*OVERSAMPLENR), 125 }, +{ (445*OVERSAMPLENR), 120 }, +{ (480*OVERSAMPLENR), 115 }, +{ (516*OVERSAMPLENR), 110 }, +{ (553*OVERSAMPLENR), 105 }, +{ (591*OVERSAMPLENR), 100 }, +{ (628*OVERSAMPLENR), 95 }, +{ (665*OVERSAMPLENR), 90 }, +{ (702*OVERSAMPLENR), 85 }, +{ (737*OVERSAMPLENR), 80 }, +{ (770*OVERSAMPLENR), 75 }, +{ (801*OVERSAMPLENR), 70 }, +{ (830*OVERSAMPLENR), 65 }, +{ (857*OVERSAMPLENR), 60 }, +{ (881*OVERSAMPLENR), 55 }, +{ (903*OVERSAMPLENR), 50 }, +{ (922*OVERSAMPLENR), 45 }, +{ (939*OVERSAMPLENR), 40 }, +{ (954*OVERSAMPLENR), 35 }, +{ (966*OVERSAMPLENR), 30 }, +{ (977*OVERSAMPLENR), 25 }, +{ (985*OVERSAMPLENR), 20 }, +{ (993*OVERSAMPLENR), 15 }, +{ (999*OVERSAMPLENR), 10 }, +{ (1004*OVERSAMPLENR), 5 }, +{ (1008*OVERSAMPLENR), 0 } //safety }; #endif #if (THERMISTORHEATER == 2) || (THERMISTORBED == 2) //200k bed thermistor #define NUMTEMPS_2 21 const short temptable_2[NUMTEMPS_2][2] = { - {(1*16), 848}, - {(54*16), 275}, - {(107*16), 228}, - {(160*16), 202}, - {(213*16), 185}, - {(266*16), 171}, - {(319*16), 160}, - {(372*16), 150}, - {(425*16), 141}, - {(478*16), 133}, - {(531*16), 125}, - {(584*16), 118}, - {(637*16), 110}, - {(690*16), 103}, - {(743*16), 95}, - {(796*16), 86}, - {(849*16), 77}, - {(902*16), 65}, - {(955*16), 49}, - {(1008*16), 17}, - {(1020*16), 0} //safety + {(1*OVERSAMPLENR), 848}, + {(54*OVERSAMPLENR), 275}, + {(107*OVERSAMPLENR), 228}, + {(160*OVERSAMPLENR), 202}, + {(213*OVERSAMPLENR), 185}, + {(266*OVERSAMPLENR), 171}, + {(319*OVERSAMPLENR), 160}, + {(372*OVERSAMPLENR), 150}, + {(425*OVERSAMPLENR), 141}, + {(478*OVERSAMPLENR), 133}, + {(531*OVERSAMPLENR), 125}, + {(584*OVERSAMPLENR), 118}, + {(637*OVERSAMPLENR), 110}, + {(690*OVERSAMPLENR), 103}, + {(743*OVERSAMPLENR), 95}, + {(796*OVERSAMPLENR), 86}, + {(849*OVERSAMPLENR), 77}, + {(902*OVERSAMPLENR), 65}, + {(955*OVERSAMPLENR), 49}, + {(1008*OVERSAMPLENR), 17}, + {(1020*OVERSAMPLENR), 0} //safety }; #endif #if (THERMISTORHEATER == 3) || (THERMISTORBED == 3) //mendel-parts #define NUMTEMPS_3 28 const short temptable_3[NUMTEMPS_3][2] = { - {(1*16),864}, - {(21*16),300}, - {(25*16),290}, - {(29*16),280}, - {(33*16),270}, - {(39*16),260}, - {(46*16),250}, - {(54*16),240}, - {(64*16),230}, - {(75*16),220}, - {(90*16),210}, - {(107*16),200}, - {(128*16),190}, - {(154*16),180}, - {(184*16),170}, - {(221*16),160}, - {(265*16),150}, - {(316*16),140}, - {(375*16),130}, - {(441*16),120}, - {(513*16),110}, - {(588*16),100}, - {(734*16),80}, - {(856*16),60}, - {(938*16),40}, - {(986*16),20}, - {(1008*16),0}, - {(1018*16),-20} + {(1*OVERSAMPLENR),864}, + {(21*OVERSAMPLENR),300}, + {(25*OVERSAMPLENR),290}, + {(29*OVERSAMPLENR),280}, + {(33*OVERSAMPLENR),270}, + {(39*OVERSAMPLENR),260}, + {(46*OVERSAMPLENR),250}, + {(54*OVERSAMPLENR),240}, + {(64*OVERSAMPLENR),230}, + {(75*OVERSAMPLENR),220}, + {(90*OVERSAMPLENR),210}, + {(107*OVERSAMPLENR),200}, + {(128*OVERSAMPLENR),190}, + {(154*OVERSAMPLENR),180}, + {(184*OVERSAMPLENR),170}, + {(221*OVERSAMPLENR),160}, + {(265*OVERSAMPLENR),150}, + {(316*OVERSAMPLENR),140}, + {(375*OVERSAMPLENR),130}, + {(441*OVERSAMPLENR),120}, + {(513*OVERSAMPLENR),110}, + {(588*OVERSAMPLENR),100}, + {(734*OVERSAMPLENR),80}, + {(856*OVERSAMPLENR),60}, + {(938*OVERSAMPLENR),40}, + {(986*OVERSAMPLENR),20}, + {(1008*OVERSAMPLENR),0}, + {(1018*OVERSAMPLENR),-20} }; #endif diff --git a/Marlin/ultralcd.h b/Marlin/ultralcd.h new file mode 100644 index 000000000..5f0196fa5 --- /dev/null +++ b/Marlin/ultralcd.h @@ -0,0 +1,156 @@ +#ifndef __ULTRALCDH +#define __ULTRALCDH +#include "Configuration.h" + +#ifdef ULTRA_LCD + + void lcd_status(); + void lcd_init(); + void lcd_status(const char* message); + void beep(); + void buttons_check(); + #define LCDSTATUSRIGHT + + #define LCD_UPDATE_INTERVAL 100 + #define STATUSTIMEOUT 15000 + + #include "Configuration.h" + + #include + extern LiquidCrystal lcd; + + //lcd display size + +#ifdef NEWPANEL + //arduino pin witch triggers an piezzo beeper + #define BEEPER 18 + + #define LCD_PINS_RS 20 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 16 + #define LCD_PINS_D5 21 + #define LCD_PINS_D6 5 + #define LCD_PINS_D7 6 + + //buttons are directly attached + #define BTN_EN1 40 + #define BTN_EN2 42 + #define BTN_ENC 19 //the click + + #define BLEN_C 2 + #define BLEN_B 1 + #define BLEN_A 0 + + #define SDCARDDETECT 38 + + #define EN_C (1< +LiquidCrystal lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7); //RS,Enable,D4,D5,D6,D7 + +unsigned long previous_millis_lcd=0; + + + +volatile char buttons=0; //the last checked buttons in a bit array. +int encoderpos=0; +short lastenc=0; +#ifdef NEWPANEL + long blocking=0; +#else + long blocking[8]={0,0,0,0,0,0,0,0}; +#endif +MainMenu menu; + +void lcd_status(const char* message) +{ + strncpy(messagetext,message,LCD_WIDTH); +} + +void clear() +{ + //lcd.setCursor(0,0); + lcd.clear(); + //delay(1); + // lcd.begin(LCD_WIDTH,LCD_HEIGHT); + //lcd_init(); +} +long previous_millis_buttons=0; + +void lcd_init() +{ + //beep(); + byte Degree[8] = + { + B01100, + B10010, + B10010, + B01100, + B00000, + B00000, + B00000, + B00000 + }; + byte Thermometer[8] = + { + B00100, + B01010, + B01010, + B01010, + B01010, + B10001, + B10001, + B01110 + }; + byte uplevel[8]={0x04, 0x0e, 0x1f, 0x04, 0x1c, 0x00, 0x00, 0x00};//thanks joris + byte refresh[8]={0x00, 0x06, 0x19, 0x18, 0x03, 0x13, 0x0c, 0x00}; //thanks joris + lcd.begin(LCD_WIDTH, LCD_HEIGHT); + lcd.createChar(1,Degree); + lcd.createChar(2,Thermometer); + lcd.createChar(3,uplevel); + lcd.createChar(4,refresh); + LCD_MESSAGE(fillto(LCD_WIDTH,"UltiMarlin ready.")); +} + + +void beep() +{ + //return; +#ifdef ULTIPANEL + pinMode(BEEPER,OUTPUT); + for(int i=0;i<20;i++){ + WRITE(BEEPER,HIGH); + delay(5); + WRITE(BEEPER,LOW); + delay(5); + } +#endif +} + +void beepshort() +{ + //return; +#ifdef ULTIPANEL + pinMode(BEEPER,OUTPUT); + for(int i=0;i<10;i++){ + WRITE(BEEPER,HIGH); + delay(3); + WRITE(BEEPER,LOW); + delay(3); + } +#endif +} +void lcd_status() +{ +#ifdef ULTIPANEL + static uint8_t oldbuttons=0; + static long previous_millis_buttons=0; + static long previous_lcdinit=0; +// buttons_check(); // Done in temperature interrupt + //previous_millis_buttons=millis(); + + if((buttons==oldbuttons) && ((millis() - previous_millis_lcd) < LCD_UPDATE_INTERVAL) ) + return; + oldbuttons=buttons; +#else + + if(((millis() - previous_millis_lcd) < LCD_UPDATE_INTERVAL) ) + return; +#endif + + previous_millis_lcd=millis(); + menu.update(); +} +#ifdef ULTIPANEL +void buttons_init() +{ +#ifdef NEWPANEL + pinMode(BTN_EN1,INPUT); + pinMode(BTN_EN2,INPUT); + pinMode(BTN_ENC,INPUT); + pinMode(SDCARDDETECT,INPUT); + WRITE(BTN_EN1,HIGH); + WRITE(BTN_EN2,HIGH); + WRITE(BTN_ENC,HIGH); + WRITE(SDCARDDETECT,HIGH); +#else + pinMode(SHIFT_CLK,OUTPUT); + pinMode(SHIFT_LD,OUTPUT); + pinMode(SHIFT_EN,OUTPUT); + pinMode(SHIFT_OUT,INPUT); + WRITE(SHIFT_OUT,HIGH); + WRITE(SHIFT_LD,HIGH); + WRITE(SHIFT_EN,LOW); +#endif +} + + +void buttons_check() +{ +// volatile static bool busy=false; +// if(busy) +// return; +// busy=true; + +#ifdef NEWPANEL + uint8_t newbutton=0; + if(READ(BTN_EN1)==0) newbutton|=EN_A; + if(READ(BTN_EN2)==0) newbutton|=EN_B; + if((blocking>1; + if(READ(SHIFT_OUT)) + newbutton|=(1<<7); + WRITE(SHIFT_CLK,HIGH); + WRITE(SHIFT_CLK,LOW); + } + buttons=~newbutton; //invert it, because a pressed switch produces a logical 0 +#endif + char enc=0; + if(buttons&EN_A) + enc|=(1<<0); + if(buttons&EN_B) + enc|=(1<<1); + if(enc!=lastenc) + { + switch(enc) + { + case encrot0: + if(lastenc==encrot3) + encoderpos++; + else if(lastenc==encrot1) + encoderpos--; + break; + case encrot1: + if(lastenc==encrot0) + encoderpos++; + else if(lastenc==encrot2) + encoderpos--; + break; + case encrot2: + if(lastenc==encrot1) + encoderpos++; + else if(lastenc==encrot3) + encoderpos--; + break; + case encrot3: + if(lastenc==encrot2) + encoderpos++; + else if(lastenc==encrot0) + encoderpos--; + break; + default: + ; + } + } + lastenc=enc; +// busy=false; +} + +#endif + +MainMenu::MainMenu() +{ + status=Main_Status; + displayStartingRow=0; + activeline=0; + force_lcd_update=true; +#ifdef ULTIPANEL + buttons_init(); +#endif + lcd_init(); + linechanging=false; +} + +extern volatile bool feedmultiplychanged; + +void MainMenu::showStatus() +{ +#if LCD_HEIGHT==4 + static int oldcurrentraw=-1; + static int oldtargetraw=-1; + //force_lcd_update=true; + if(force_lcd_update||feedmultiplychanged) //initial display of content + { + feedmultiplychanged=false; + encoderpos=feedmultiply; + clear(); + lcd.setCursor(0,0);lcd.print("\002123/567\001 "); +#if defined BED_USES_THERMISTOR || defined BED_USES_AD595 + lcd.setCursor(10,0);lcd.print("B123/567\001 "); +#endif + } + + + if((abs(current_raw[0]-oldcurrentraw)>3)||force_lcd_update) + { + lcd.setCursor(1,0); + lcd.print(ftostr3(analog2temp(current_raw[0]))); + oldcurrentraw=current_raw[0]; + } + if((target_raw[0]!=oldtargetraw)||force_lcd_update) + { + lcd.setCursor(5,0); + lcd.print(ftostr3(analog2temp(target_raw[0]))); + oldtargetraw=target_raw[0]; + } + #if defined BED_USES_THERMISTOR || defined BED_USES_AD595 + static int oldcurrentbedraw=-1; + static int oldtargetbedraw=-1; + if((current_bed_raw!=oldcurrentbedraw)||force_lcd_update) + { + lcd.setCursor(1,0); + lcd.print(ftostr3(analog2temp(current_bed_raw))); + oldcurrentraw=current_raw[1]; + } + if((target_bed_raw!=oldtargebedtraw)||force_lcd_update) + { + lcd.setCursor(5,0); + lcd.print(ftostr3(analog2temp(target_bed_raw))); + oldtargetraw=target_bed_raw; + } + #endif + //starttime=2; + static uint16_t oldtime=0; + if(starttime!=0) + { + lcd.setCursor(0,1); + uint16_t time=millis()/60000-starttime/60000; + + if(starttime!=oldtime) + { + lcd.print(itostr2(time/60));lcd.print("h ");lcd.print(itostr2(time%60));lcd.print("m"); + oldtime=time; + } + } + static int oldzpos=0; + int currentz=current_position[2]*10; + if((currentz!=oldzpos)||force_lcd_update) + { + lcd.setCursor(10,1); + lcd.print("Z:");lcd.print(itostr31(currentz)); + oldzpos=currentz; + } + static int oldfeedmultiply=0; + int curfeedmultiply=feedmultiply; + if(encoderpos!=curfeedmultiply||force_lcd_update) + { + curfeedmultiply=encoderpos; + if(curfeedmultiply<10) + curfeedmultiply=10; + if(curfeedmultiply>999) + curfeedmultiply=999; + feedmultiply=curfeedmultiply; + encoderpos=curfeedmultiply; + } + if((curfeedmultiply!=oldfeedmultiply)||force_lcd_update) + { + oldfeedmultiply=curfeedmultiply; + lcd.setCursor(0,2); + lcd.print(itostr3(curfeedmultiply));lcd.print("% "); + } + if(messagetext[0]!='\0') + { + lcd.setCursor(0,LCD_HEIGHT-1); + lcd.print(fillto(LCD_WIDTH,messagetext)); + messagetext[0]='\0'; + } +#else //smaller LCDS---------------------------------- + static int oldcurrentraw=-1; + static int oldtargetraw=-1; + if(force_lcd_update) //initial display of content + { + encoderpos=feedmultiply; + lcd.setCursor(0,0);lcd.print("\002123/567\001 "); + #if defined BED_USES_THERMISTOR || defined BED_USES_AD595 + lcd.setCursor(10,0);lcd.print("B123/567\001 "); + #endif + } + + + if((abs(current_raw[0]-oldcurrentraw)>3)||force_lcd_update) + { + lcd.setCursor(1,0); + lcd.print(ftostr3(analog2temp(current_raw[0]))); + oldcurrentraw=current_raw[0]; + } + if((target_raw[0]!=oldtargetraw)||force_lcd_update) + { + lcd.setCursor(5,0); + lcd.print(ftostr3(analog2temp(target_raw[0]))); + oldtargetraw=target_raw[0]; + } + + if(messagetext[0]!='\0') + { + lcd.setCursor(0,LCD_HEIGHT-1); + lcd.print(fillto(LCD_WIDTH,messagetext)); + messagetext[0]='\0'; + } + +#endif +} + +enum {ItemP_exit, ItemP_home, ItemP_origin, ItemP_preheat, ItemP_extrude, ItemP_disstep}; + +void MainMenu::showPrepare() +{ + uint8_t line=0; + if(lastlineoffset!=lineoffset) + { + force_lcd_update=true; + clear(); + } + for(uint8_t i=lineoffset;i3) + { + lineoffset++; + encoderpos=3*lcdslow; + if(lineoffset>(ItemP_disstep+1-LCD_HEIGHT)) + lineoffset=ItemP_disstep+1-LCD_HEIGHT; + force_lcd_update=true; + } + //encoderpos=encoderpos%LCD_HEIGHT; + lastencoderpos=encoderpos; + activeline=encoderpos/lcdslow; + lcd.setCursor(0,activeline);lcd.print((activeline+lineoffset)?'>':'\003'); + } +} +enum { + ItemC_exit, ItemC_nozzle, + ItemC_PID_P,ItemC_PID_I,ItemC_PID_D,ItemC_PID_C, + ItemC_fan, + ItemC_acc, ItemC_xyjerk, + ItemC_vmaxx, ItemC_vmaxy, ItemC_vmaxz, ItemC_vmaxe, + ItemC_vtravmin,ItemC_vmin, + ItemC_amaxx, ItemC_amaxy, ItemC_amaxz, ItemC_amaxe, + ItemC_aret,ItemC_esteps, ItemC_store, ItemC_load,ItemC_failsafe +}; + +void MainMenu::showControl() +{ + uint8_t line=0; + if((lastlineoffset!=lineoffset)||force_lcd_update) + { + force_lcd_update=true; + clear(); + } + for(uint8_t i=lineoffset;i260) encoderpos=260; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + } + }break; + + case ItemC_fan: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcd.print(" Fan speed:"); + lcd.setCursor(13,line);lcd.print(ftostr3(fanpwm)); + } + + if((activeline==line) ) + { + if(CLICKED) //nalogWrite(FAN_PIN, fanpwm); + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=fanpwm; + } + else + { + fanpwm = constrain(encoderpos,0,255); + encoderpos=fanpwm; + analogWrite(FAN_PIN, fanpwm); + + beepshort(); + } + BLOCK; + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>255) encoderpos=255; + fanpwm=encoderpos; + analogWrite(FAN_PIN, fanpwm); + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + } + }break; + case ItemC_acc: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcd.print(" Acc:"); + lcd.setCursor(13,line);lcd.print(itostr3(acceleration/100));lcd.print("00"); + } + + if((activeline==line) ) + { + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(int)acceleration/100; + } + else + { + acceleration= encoderpos*100; + encoderpos=activeline*lcdslow; + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<5) encoderpos=5; + if(encoderpos>990) encoderpos=990; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));lcd.print("00"); + } + } + }break; + case ItemC_xyjerk: //max_xy_jerk + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcd.print(" Vxy-jerk: "); + lcd.setCursor(13,line);lcd.print(itostr3(max_xy_jerk/60)); + } + + if((activeline==line) ) + { + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(int)max_xy_jerk/60; + } + else + { + max_xy_jerk= encoderpos*60; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<1) encoderpos=1; + if(encoderpos>990) encoderpos=990; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + } + }break; + case ItemC_PID_P: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcd.print(" PID-P: "); + lcd.setCursor(13,line);lcd.print(itostr4(Kp)); + } + + if((activeline==line) ) + { + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(int)Kp/5; + } + else + { + Kp= encoderpos*5; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<1) encoderpos=1; + if(encoderpos>9990/5) encoderpos=9990/5; + lcd.setCursor(13,line);lcd.print(itostr4(encoderpos*5)); + } + } + }break; + case ItemC_PID_I: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcd.print(" PID-I: "); + lcd.setCursor(13,line);lcd.print(ftostr51(Ki)); + } + + if((activeline==line) ) + { + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(int)(Ki*10); + } + else + { + Ki= encoderpos/10.; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>9990) encoderpos=9990; + lcd.setCursor(13,line);lcd.print(ftostr51(encoderpos/10.)); + } + } + }break; + case ItemC_PID_D: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcd.print(" PID-D: "); + lcd.setCursor(13,line);lcd.print(itostr4(Kd)); + } + + if((activeline==line) ) + { + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(int)Kd/5; + } + else + { + Kd= encoderpos*5; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>9990/5) encoderpos=9990/5; + lcd.setCursor(13,line);lcd.print(itostr4(encoderpos*5)); + } + } + }break; + + + + case ItemC_PID_C: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcd.print(" PID-C: "); + lcd.setCursor(13,line);lcd.print(itostr3(Kc)); + } + + if((activeline==line) ) + { + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(int)Kc; + } + else + { + Kc= encoderpos; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>990) encoderpos=990; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + } + }break; + case ItemC_vmaxx: + case ItemC_vmaxy: + case ItemC_vmaxz: + case ItemC_vmaxe: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcd.print(" Vmax "); + if(i==ItemC_vmaxx)lcd.print("x:"); + if(i==ItemC_vmaxy)lcd.print("y:"); + if(i==ItemC_vmaxz)lcd.print("z:"); + if(i==ItemC_vmaxe)lcd.print("e:"); + lcd.setCursor(13,line);lcd.print(itostr3(max_feedrate[i-ItemC_vmaxx]/60)); + } + + if((activeline==line) ) + { + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(int)max_feedrate[i-ItemC_vmaxx]/60; + } + else + { + max_feedrate[i-ItemC_vmaxx]= encoderpos*60; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<1) encoderpos=1; + if(encoderpos>990) encoderpos=990; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + } + }break; + + case ItemC_vmin: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcd.print(" Vmin:"); + lcd.setCursor(13,line);lcd.print(itostr3(minimumfeedrate/60)); + } + + if((activeline==line) ) + { + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(int)(minimumfeedrate/60.); + } + else + { + minimumfeedrate= encoderpos*60; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>990) encoderpos=990; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + } + }break; + case ItemC_vtravmin: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcd.print(" VTrav min:"); + lcd.setCursor(13,line);lcd.print(itostr3(mintravelfeedrate/60)); + } + + if((activeline==line) ) + { + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(int)mintravelfeedrate/60; + } + else + { + mintravelfeedrate= encoderpos*60; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>990) encoderpos=990; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + } + }break; + + case ItemC_amaxx: + case ItemC_amaxy: + case ItemC_amaxz: + case ItemC_amaxe: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcd.print(" Amax "); + if(i==ItemC_amaxx)lcd.print("x:"); + if(i==ItemC_amaxy)lcd.print("y:"); + if(i==ItemC_amaxz)lcd.print("z:"); + if(i==ItemC_amaxe)lcd.print("e:"); + lcd.setCursor(13,line);lcd.print(itostr3(max_acceleration_units_per_sq_second[i-ItemC_amaxx]/100));lcd.print("00"); + } + + if((activeline==line) ) + { + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(int)max_acceleration_units_per_sq_second[i-ItemC_amaxx]/100; + } + else + { + max_acceleration_units_per_sq_second[i-ItemC_amaxx]= encoderpos*100; + encoderpos=activeline*lcdslow; + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<1) encoderpos=1; + if(encoderpos>990) encoderpos=990; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));lcd.print("00"); + } + } + }break; + case ItemC_aret://float retract_acceleration = 7000; + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcd.print(" A-retract:"); + lcd.setCursor(13,line);lcd.print(ftostr3(retract_acceleration/100));lcd.print("00"); + } + + if((activeline==line) ) + { + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(int)retract_acceleration/100; + } + else + { + retract_acceleration= encoderpos*100; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<10) encoderpos=10; + if(encoderpos>990) encoderpos=990; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));lcd.print("00"); + } + } + }break; + case ItemC_esteps://axis_steps_per_unit[i] = code_value(); + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcd.print(" Esteps/mm:"); + lcd.setCursor(13,line);lcd.print(itostr4(axis_steps_per_unit[3])); + } + + if((activeline==line) ) + { + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(int)axis_steps_per_unit[3]; + } + else + { + float factor=float(encoderpos)/float(axis_steps_per_unit[3]); + position[E_AXIS]=lround(position[E_AXIS]*factor); + //current_position[3]*=factor; + axis_steps_per_unit[E_AXIS]= encoderpos; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<5) encoderpos=5; + if(encoderpos>9999) encoderpos=9999; + lcd.setCursor(13,line);lcd.print(itostr4(encoderpos)); + } + } + }break; + case ItemC_store: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcd.print(" Store EPROM"); + } + if((activeline==line) && CLICKED) + { + //enquecommand("M84"); + beepshort(); + BLOCK; + StoreSettings(); + } + }break; + case ItemC_load: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcd.print(" Load EPROM"); + } + if((activeline==line) && CLICKED) + { + //enquecommand("M84"); + beepshort(); + BLOCK; + RetrieveSettings(); + } + }break; + case ItemC_failsafe: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcd.print(" Restore Failsafe"); + } + if((activeline==line) && CLICKED) + { + //enquecommand("M84"); + beepshort(); + BLOCK; + RetrieveSettings(true); + } + }break; + default: + break; + } + line++; + } + lastlineoffset=lineoffset; + + if(!linechanging && ((encoderpos/lcdslow!=lastencoderpos/lcdslow)||force_lcd_update)) + { + + lcd.setCursor(0,activeline);lcd.print((activeline+lineoffset)?' ':' '); + + if(encoderpos<0) + { + lineoffset--; + if(lineoffset<0) + lineoffset=0; + encoderpos=0; + force_lcd_update=true; + } + if(encoderpos/lcdslow>3) + { + lineoffset++; + encoderpos=3*lcdslow; + if(lineoffset>(ItemC_failsafe+1-LCD_HEIGHT)) + lineoffset=ItemC_failsafe+1-LCD_HEIGHT; + force_lcd_update=true; + } + //encoderpos=encoderpos%LCD_HEIGHT; + lastencoderpos=encoderpos; + activeline=encoderpos/lcdslow; + if(activeline>3) activeline=3; + lcd.setCursor(0,activeline);lcd.print((activeline+lineoffset)?'>':'\003'); + } +} + +#include "SdFat.h" + +void MainMenu::getfilename(const uint8_t nr) +{ +#ifdef SDSUPPORT + dir_t p; + root.rewind(); + uint8_t cnt=0; + filename[0]='\0'; + while (root.readDir(p) > 0) + { + if (p.name[0] == DIR_NAME_FREE) break; + if (p.name[0] == DIR_NAME_DELETED || p.name[0] == '.'|| p.name[0] == '_') continue; + if (!DIR_IS_FILE_OR_SUBDIR(&p)) continue; + if(p.name[8]!='G') continue; + if(p.name[9]=='~') continue; + if(cnt++!=nr) continue; + //Serial.println((char*)p.name); + uint8_t writepos=0; + for (uint8_t i = 0; i < 11; i++) + { + if (p.name[i] == ' ') continue; + if (i == 8) { + filename[writepos++]='.'; + } + filename[writepos++]=p.name[i]; + } + filename[writepos++]=0; + } +#endif +} + +uint8_t getnrfilenames() +{ +#ifdef SDSUPPORT + dir_t p; + root.rewind(); + uint8_t cnt=0; + while (root.readDir(p) > 0) + { + if (p.name[0] == DIR_NAME_FREE) break; + if (p.name[0] == DIR_NAME_DELETED || p.name[0] == '.'|| p.name[0] == '_') continue; + if (!DIR_IS_FILE_OR_SUBDIR(&p)) continue; + if(p.name[8]!='G') continue; + if(p.name[9]=='~') continue; + cnt++; + } + return cnt; +#endif +} + +void MainMenu::showSD() +{ + +#ifdef SDSUPPORT + uint8_t line=0; + + if(lastlineoffset!=lineoffset) + { + force_lcd_update=true; + } + static uint8_t nrfiles=0; + if(force_lcd_update) + { + clear(); + if(sdactive) + { + nrfiles=getnrfilenames(); + } + else + { + nrfiles=0; + lineoffset=0; + } + //Serial.print("Nr files:"); Serial.println((int)nrfiles); + } + + for(int8_t i=lineoffset;i3) + { + lineoffset++; + encoderpos=3*lcdslow; + if(lineoffset>(1+nrfiles+1-LCD_HEIGHT)) + lineoffset=1+nrfiles+1-LCD_HEIGHT; + force_lcd_update=true; + + } + lastencoderpos=encoderpos; + activeline=encoderpos; + if(activeline>3) + { + activeline=3; + } + if(activeline<0) + { + activeline=0; + } + if(activeline>1+nrfiles) activeline=1+nrfiles; + if(lineoffset>1+nrfiles) lineoffset=1+nrfiles; + lcd.setCursor(0,activeline);lcd.print((activeline+lineoffset)?'>':'\003'); + + } +#endif +} + +enum {ItemM_watch, ItemM_prepare, ItemM_control, ItemM_file }; +void MainMenu::showMainMenu() +{ + //if(int(encoderpos/lcdslow)!=int(lastencoderpos/lcdslow)) + // force_lcd_update=true; +#ifndef ULTIPANEL + force_lcd_update=false; +#endif + //Serial.println((int)activeline); + if(force_lcd_update) + clear(); + for(short line=0;line=LCD_HEIGHT) activeline=LCD_HEIGHT-1; + if((encoderpos!=lastencoderpos)||force_lcd_update) + { + lcd.setCursor(0,activeline);lcd.print(activeline?' ':' '); + if(encoderpos<0) encoderpos=0; + if(encoderpos>3*lcdslow) encoderpos=3*lcdslow; + activeline=abs(encoderpos/lcdslow)%LCD_HEIGHT; + if(activeline<0) activeline=0; + if(activeline>=LCD_HEIGHT) activeline=LCD_HEIGHT-1; + lastencoderpos=encoderpos; + lcd.setCursor(0,activeline);lcd.print(activeline?'>':'\003'); + } + + + +} + +void MainMenu::update() +{ + static MainStatus oldstatus=Main_Menu; //init automatically causes foce_lcd_update=true + static long timeoutToStatus=0; + static bool oldcardstatus=false; +#ifdef CARDINSERTED + if((CARDINSERTED != oldcardstatus)) + { + force_lcd_update=true; + oldcardstatus=CARDINSERTED; + //Serial.println("SD CHANGE"); + if(CARDINSERTED) + { + initsd(); + lcd_status("Card inserted"); + } + else + { + sdactive=false; + lcd_status("Card removed"); + + } + } +#endif + + if(status!=oldstatus) + { + //Serial.println(status); + //clear(); + force_lcd_update=true; + encoderpos=0; + lineoffset=0; + + oldstatus=status; + } + if( (encoderpos!=lastencoderpos) || CLICKED) + timeoutToStatus=millis()+STATUSTIMEOUT; + + switch(status) + { + case Main_Status: + { + showStatus(); + if(CLICKED) + { + linechanging=false; + BLOCK + status=Main_Menu; + timeoutToStatus=millis()+STATUSTIMEOUT; + } + }break; + case Main_Menu: + { + showMainMenu(); + linechanging=false; + }break; + case Main_Prepare: + { + showPrepare(); + }break; + case Main_Control: + { + showControl(); + }break; + case Main_SD: + { + showSD(); + }break; + } + + if(timeoutToStatus=0)?'+':'-'; + xx=abs(xx); + conv[1]=(xx/1000)%10+'0'; + conv[2]=(xx/100)%10+'0'; + conv[3]=(xx/10)%10+'0'; + conv[4]='.'; + conv[5]=(xx)%10+'0'; + conv[6]=0; + return conv; +} + +char *itostr31(const int &xx) +{ + //sprintf(conv,"%5.1f",x); + conv[0]=(xx>=0)?'+':'-'; + conv[1]=(xx/1000)%10+'0'; + conv[2]=(xx/100)%10+'0'; + conv[3]=(xx/10)%10+'0'; + conv[4]='.'; + conv[5]=(xx)%10+'0'; + conv[6]=0; + return conv; +} +char *itostr3(const int &xx) +{ + conv[0]=(xx/100)%10+'0'; + conv[1]=(xx/10)%10+'0'; + conv[2]=(xx)%10+'0'; + conv[3]=0; + return conv; +} + +char *itostr4(const int &xx) +{ + conv[0]=(xx/1000)%10+'0'; + conv[1]=(xx/100)%10+'0'; + conv[2]=(xx/10)%10+'0'; + conv[3]=(xx)%10+'0'; + conv[4]=0; + return conv; +} + +/// convert float to string with +1234.5 format +char *ftostr51(const float &x) +{ + int xx=x*10; + conv[0]=(xx>=0)?'+':'-'; + xx=abs(xx); + conv[1]=(xx/10000)%10+'0'; + conv[2]=(xx/1000)%10+'0'; + conv[3]=(xx/100)%10+'0'; + conv[4]=(xx/10)%10+'0'; + conv[5]='.'; + conv[6]=(xx)%10+'0'; + conv[7]=0; + return conv; +} + +char *fillto(int8_t n,char *c) +{ + static char ret[25]; + bool endfound=false; + for(int8_t i=0;i= 16000000L - // for the 16 MHz clock on most Arduino boards - - // for a one-microsecond delay, simply return. the overhead - // of the function call yields a delay of approximately 1 1/8 us. - if (--us == 0) - return; - - // the following loop takes a quarter of a microsecond (4 cycles) - // per iteration, so execute it four times for each microsecond of - // delay requested. - us <<= 2; - - // account for the time taken in the preceeding commands. - us -= 2; -#else - // for the 8 MHz internal clock on the ATmega168 - - // for a one- or two-microsecond delay, simply return. the overhead of - // the function calls takes more than two microseconds. can't just - // subtract two, since us is unsigned; we'd overflow. - if (--us == 0) - return; - if (--us == 0) - return; - - // the following loop takes half of a microsecond (4 cycles) - // per iteration, so execute it twice for each microsecond of - // delay requested. - us <<= 1; - - // partially compensate for the time taken by the preceeding commands. - // we can't subtract any more than this or we'd overflow w/ small delays. - us--; -#endif - - // disable interrupts, otherwise the timer 0 overflow interrupt that - // tracks milliseconds will make us delay longer than we want. - oldSREG = SREG; - cli(); - - // busy wait - __asm__ __volatile__ ( - "1: sbiw %0,1" "\n\t" // 2 cycles - "brne 1b" : "=w" (us) : "0" (us) // 2 cycles - ); - - // reenable interrupts. - SREG = oldSREG; -} - -void init() -{ - // this needs to be called before setup() or some functions won't - // work there - sei(); - - // on the ATmega168, timer 0 is also used for fast hardware pwm - // (using phase-correct PWM would mean that timer 0 overflowed half as often - // resulting in different millis() behavior on the ATmega8 and ATmega168) - sbi(TCCR0A, WGM01); - sbi(TCCR0A, WGM00); - - // set timer 0 prescale factor to 64 - sbi(TCCR0B, CS01); - sbi(TCCR0B, CS00); - - // enable timer 0 overflow interrupt - sbi(TIMSK0, TOIE0); - - // timers 1 and 2 are used for phase-correct hardware pwm - // this is better for motors as it ensures an even waveform - // note, however, that fast pwm mode can achieve a frequency of up - // 8 MHz (with a 16 MHz clock) at 50% duty cycle -#if 0 - // set timer 1 prescale factor to 64 - sbi(TCCR1B, CS11); - sbi(TCCR1B, CS10); - - // put timer 1 in 8-bit phase correct pwm mode - sbi(TCCR1A, WGM10); - - // set timer 2 prescale factor to 64 - sbi(TCCR2B, CS22); - - // configure timer 2 for phase correct pwm (8-bit) - sbi(TCCR2A, WGM20); - - // set a2d prescale factor to 128 - // 16 MHz / 128 = 125 KHz, inside the desired 50-200 KHz range. - // XXX: this will not work properly for other clock speeds, and - // this code should use F_CPU to determine the prescale factor. - sbi(ADCSRA, ADPS2); - sbi(ADCSRA, ADPS1); - sbi(ADCSRA, ADPS0); - - // enable a2d conversions - sbi(ADCSRA, ADEN); - - // the bootloader connects pins 0 and 1 to the USART; disconnect them - // here so they can be used as normal digital i/o; they will be - // reconnected in Serial.begin() - UCSR0B = 0; - #if defined(__AVR_ATmega644P__) - //TODO: test to see if disabling this helps? - //UCSR1B = 0; - #endif -#endif -} diff --git a/Marlin/wiring_serial.c b/Marlin/wiring_serial.c deleted file mode 100644 index c027944c9..000000000 --- a/Marlin/wiring_serial.c +++ /dev/null @@ -1,139 +0,0 @@ -/* - wiring_serial.c - serial functions. - Part of Arduino - http://www.arduino.cc/ - - Copyright (c) 2005-2006 David A. Mellis - Modified 29 January 2009, Marius Kintel for Sanguino - http://www.sanguino.cc/ - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General - Public License along with this library; if not, write to the - Free Software Foundation, Inc., 59 Temple Place, Suite 330, - Boston, MA 02111-1307 USA - - $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $ -*/ - - -#include "wiring_private.h" - -// Define constants and variables for buffering incoming serial data. We're -// using a ring buffer (I think), in which rx_buffer_head is the index of the -// location to which to write the next incoming character and rx_buffer_tail -// is the index of the location from which to read. -#define RX_BUFFER_SIZE 128 -#define RX_BUFFER_MASK 0x7f - -#if defined(__AVR_ATmega644P__) -unsigned char rx_buffer[2][RX_BUFFER_SIZE]; -int rx_buffer_head[2] = {0, 0}; -int rx_buffer_tail[2] = {0, 0}; -#else -unsigned char rx_buffer[1][RX_BUFFER_SIZE]; -int rx_buffer_head[1] = {0}; -int rx_buffer_tail[1] = {0}; -#endif - - -#define BEGIN_SERIAL(uart_, baud_) \ -{ \ - UBRR##uart_##H = ((F_CPU / 16 + baud / 2) / baud - 1) >> 8; \ - UBRR##uart_##L = ((F_CPU / 16 + baud / 2) / baud - 1); \ - \ - /* reset config for UART */ \ - UCSR##uart_##A = 0; \ - UCSR##uart_##B = 0; \ - UCSR##uart_##C = 0; \ - \ - /* enable rx and tx */ \ - sbi(UCSR##uart_##B, RXEN##uart_);\ - sbi(UCSR##uart_##B, TXEN##uart_);\ - \ - /* enable interrupt on complete reception of a byte */ \ - sbi(UCSR##uart_##B, RXCIE##uart_); \ - UCSR##uart_##C = _BV(UCSZ##uart_##1)|_BV(UCSZ##uart_##0); \ - /* defaults to 8-bit, no parity, 1 stop bit */ \ -} - -void beginSerial(uint8_t uart, long baud) -{ - if (uart == 0) BEGIN_SERIAL(0, baud) -#if defined(__AVR_ATmega644P__) - else BEGIN_SERIAL(1, baud) -#endif -} - -#define SERIAL_WRITE(uart_, c_) \ - while (!(UCSR##uart_##A & (1 << UDRE##uart_))) \ - ; \ - UDR##uart_ = c - -void serialWrite(uint8_t uart, unsigned char c) -{ - if (uart == 0) { - SERIAL_WRITE(0, c); - } -#if defined(__AVR_ATmega644P__) - else { - SERIAL_WRITE(1, c); - } -#endif -} - -int serialAvailable(uint8_t uart) -{ - return (RX_BUFFER_SIZE + rx_buffer_head[uart] - rx_buffer_tail[uart]) & RX_BUFFER_MASK; -} - -int serialRead(uint8_t uart) -{ - // if the head isn't ahead of the tail, we don't have any characters - if (rx_buffer_head[uart] == rx_buffer_tail[uart]) { - return -1; - } else { - unsigned char c = rx_buffer[uart][rx_buffer_tail[uart]]; - rx_buffer_tail[uart] = (rx_buffer_tail[uart] + 1) & RX_BUFFER_MASK; - return c; - } -} - -void serialFlush(uint8_t uart) -{ - // don't reverse this or there may be problems if the RX interrupt - // occurs after reading the value of rx_buffer_head but before writing - // the value to rx_buffer_tail; the previous value of rx_buffer_head - // may be written to rx_buffer_tail, making it appear as if the buffer - // were full, not empty. - rx_buffer_head[uart] = rx_buffer_tail[uart]; -} - -#define UART_ISR(uart_) \ -ISR(USART##uart_##_RX_vect) \ -{ \ - unsigned char c = UDR##uart_; \ - \ - int i = (rx_buffer_head[uart_] + 1) & RX_BUFFER_MASK; \ - \ - /* if we should be storing the received character into the location \ - just before the tail (meaning that the head would advance to the \ - current location of the tail), we're about to overflow the buffer \ - and so we don't write the character or advance the head. */ \ - if (i != rx_buffer_tail[uart_]) { \ - rx_buffer[uart_][rx_buffer_head[uart_]] = c; \ - rx_buffer_head[uart_] = i; \ - } \ -} - -UART_ISR(0) -#if defined(__AVR_ATmega644P__) -UART_ISR(1) -#endif