From 09fa34a9e1720f86a6303da65fefb20f3bf475e1 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 9 Oct 2017 16:18:10 -0500 Subject: [PATCH] Modernize configs --- .../examples/Anet/A6/Configuration_adv.h | 2 +- .../Creality/CR-10/Configuration_adv.h | 12 +----- Marlin/src/pins/pins_AZTEEG_X3.h | 5 ++- Marlin/src/pins/pins_AZTEEG_X3_PRO.h | 2 +- Marlin/src/pins/pins_RAMPS_RE_ARM.h | 39 +++++++++---------- 5 files changed, 25 insertions(+), 35 deletions(-) diff --git a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h index 78368a606..87827bc12 100644 --- a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h @@ -601,7 +601,7 @@ */ //#define BABYSTEPPING #if ENABLED(BABYSTEPPING) - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion. //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h index 4294fbdf9..cf13b9cf8 100644 --- a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h @@ -1106,57 +1106,46 @@ //#define E4_IS_L6470 #define X_MICROSTEPS 16 // number of microsteps - #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall #define X2_MICROSTEPS 16 - #define X2_K_VAL 50 #define X2_OVERCURRENT 2000 #define X2_STALLCURRENT 1500 #define Y_MICROSTEPS 16 - #define Y_K_VAL 50 #define Y_OVERCURRENT 2000 #define Y_STALLCURRENT 1500 #define Y2_MICROSTEPS 16 - #define Y2_K_VAL 50 #define Y2_OVERCURRENT 2000 #define Y2_STALLCURRENT 1500 #define Z_MICROSTEPS 16 - #define Z_K_VAL 50 #define Z_OVERCURRENT 2000 #define Z_STALLCURRENT 1500 #define Z2_MICROSTEPS 16 - #define Z2_K_VAL 50 #define Z2_OVERCURRENT 2000 #define Z2_STALLCURRENT 1500 #define E0_MICROSTEPS 16 - #define E0_K_VAL 50 #define E0_OVERCURRENT 2000 #define E0_STALLCURRENT 1500 #define E1_MICROSTEPS 16 - #define E1_K_VAL 50 #define E1_OVERCURRENT 2000 #define E1_STALLCURRENT 1500 #define E2_MICROSTEPS 16 - #define E2_K_VAL 50 #define E2_OVERCURRENT 2000 #define E2_STALLCURRENT 1500 #define E3_MICROSTEPS 16 - #define E3_K_VAL 50 #define E3_OVERCURRENT 2000 #define E3_STALLCURRENT 1500 #define E4_MICROSTEPS 16 - #define E4_K_VAL 50 #define E4_OVERCURRENT 2000 #define E4_STALLCURRENT 1500 @@ -1298,6 +1287,7 @@ #if ENABLED(CUSTOM_USER_MENUS) #define USER_SCRIPT_DONE "M117 User Script Done" #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" diff --git a/Marlin/src/pins/pins_AZTEEG_X3.h b/Marlin/src/pins/pins_AZTEEG_X3.h index efe9e2f0f..86ccbd924 100644 --- a/Marlin/src/pins/pins_AZTEEG_X3.h +++ b/Marlin/src/pins/pins_AZTEEG_X3.h @@ -50,6 +50,9 @@ // // LCD / Controller // +#undef STAT_LED_RED_PIN +#undef STAT_LED_BLUE_PIN + #if ENABLED(VIKI2) || ENABLED(miniVIKI) #undef DOGLCD_A0 @@ -59,8 +62,6 @@ #define DOGLCD_CS 32 #define BTN_ENC 12 - #undef STAT_LED_RED_PIN - #undef STAT_LED_BLUE_PIN #define STAT_LED_RED_PIN 64 #define STAT_LED_BLUE_PIN 63 diff --git a/Marlin/src/pins/pins_AZTEEG_X3_PRO.h b/Marlin/src/pins/pins_AZTEEG_X3_PRO.h index 0e76a2a23..f44beb512 100644 --- a/Marlin/src/pins/pins_AZTEEG_X3_PRO.h +++ b/Marlin/src/pins/pins_AZTEEG_X3_PRO.h @@ -138,7 +138,7 @@ #undef BEEPER_PIN #define BEEPER_PIN 12 // 33 isn't physically available to the LCD display #else - #define STAT_LED_RED_PIN 32 + #define STAT_LED_RED_PIN 32 #define STAT_LED_BLUE_PIN 35 #endif diff --git a/Marlin/src/pins/pins_RAMPS_RE_ARM.h b/Marlin/src/pins/pins_RAMPS_RE_ARM.h index bc33ee4de..80cb0abaf 100644 --- a/Marlin/src/pins/pins_RAMPS_RE_ARM.h +++ b/Marlin/src/pins/pins_RAMPS_RE_ARM.h @@ -247,12 +247,11 @@ #define DOGLCD_A0 59 // J3-8 & AUX-2 #define DOGLCD_CS 63 // J5-3 & AUX-2 -#ifdef ULTIPANEL - - #define LCD_PINS_D5 71 // ENET_MDIO - #define LCD_PINS_D6 73 // ENET_RX_ER - #define LCD_PINS_D7 75 // ENET_RXD1 -#endif + #ifdef ULTIPANEL + #define LCD_PINS_D5 71 // ENET_MDIO + #define LCD_PINS_D6 73 // ENET_RX_ER + #define LCD_PINS_D7 75 // ENET_RXD1 + #endif #if ENABLED(NEWPANEL) #if ENABLED(REPRAPWORLD_KEYPAD) @@ -267,21 +266,21 @@ //#define SHIFT_EN 41 // J5-4 & AUX-4 #endif - #define SDCARD_SORT_ALPHA // Using SORT feature to keep one directory level in RAM - // When going up/down directory levels the SD card is - // accessed but the garbage/lines are removed when the - // LCD updates + #define SDCARD_SORT_ALPHA // Using SORT feature to keep one directory level in RAM + // When going up/down directory levels the SD card is + // accessed but the garbage/lines are removed when the + // LCD updates - #define SDSORT_LIMIT 256 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_LIMIT 256 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #if ENABLED(VIKI2) || ENABLED(miniVIKI) -// #define LCD_SCREEN_ROT_180 + #if ENABLED(VIKI2) || ENABLED(miniVIKI) + // #define LCD_SCREEN_ROT_180 #undef BEEPER_PIN #define BEEPER_PIN 37 // may change if cable changes @@ -309,12 +308,12 @@ #define STAT_LED_BLUE_PIN 63 // may change if cable changes #define STAT_LED_RED_PIN 6 // may change if cable changes #endif + //#define MISO_PIN 50 // system defined J3-10 & AUX-3 //#define MOSI_PIN 51 // system defined J3-10 & AUX-3 //#define SCK_PIN 52 // system defined J3-9 & AUX-3 //#define SS_PIN 53 // system defined J3-5 & AUX-3 - sometimes called SDSS - #if ENABLED(MINIPANEL) // GLCD features //#define LCD_CONTRAST 190