Allow servo features in combination (#16960)

This commit is contained in:
Scott Lahteine 2020-02-26 06:26:54 -06:00 committed by GitHub
parent daa32013b1
commit 0a7e7a6fa5
Signed by: GitHub
GPG key ID: 4AEE18F83AFDEB23
6 changed files with 56 additions and 40 deletions

View file

@ -105,7 +105,4 @@ private:
static void mode_conv_proc(const bool M5V);
};
// Deploy/stow angles for use by servo.cpp / servo.h
#define BLTOUCH_ANGLES { BLTOUCH_DEPLOY, BLTOUCH_STOW }
extern BLTouch bltouch;

View file

@ -30,6 +30,12 @@ void GcodeSuite::M281() {
if (!parser.seenval('P')) return;
const int servo_index = parser.value_int();
if (WITHIN(servo_index, 0, NUM_SERVOS - 1)) {
#if ENABLED(BLTOUCH)
if (servo_index == Z_PROBE_SERVO_NR) {
SERIAL_ERROR_MSG("BLTouch angles can't be changed.");
return;
}
#endif
bool angle_change = false;
if (parser.seen('L')) {
servo_angles[servo_index][0] = parser.value_int();

View file

@ -502,6 +502,10 @@
* Set a flag for a servo probe (or BLTouch)
*/
#define HAS_Z_SERVO_PROBE (defined(Z_PROBE_SERVO_NR) && Z_PROBE_SERVO_NR >= 0)
#define HAS_SERVO_ANGLES (HAS_Z_SERVO_PROBE || EITHER(SWITCHING_EXTRUDER, SWITCHING_NOZZLE))
#if !HAS_SERVO_ANGLES
#undef EDITABLE_SERVO_ANGLES
#endif
/**
* Set flags for enabled probes

View file

@ -1546,16 +1546,6 @@
#define HAS_SERVO_3 (PIN_EXISTS(SERVO3) && NUM_SERVOS > 3)
#define HAS_SERVOS (NUM_SERVOS > 0)
#if HAS_SERVOS && !defined(Z_PROBE_SERVO_NR)
#define Z_PROBE_SERVO_NR -1
#endif
#define HAS_SERVO_ANGLES (EITHER(SWITCHING_EXTRUDER, SWITCHING_NOZZLE) || (HAS_Z_SERVO_PROBE && defined(Z_PROBE_SERVO_NR)))
#if !HAS_SERVO_ANGLES || ENABLED(BLTOUCH)
#undef EDITABLE_SERVO_ANGLES
#endif
// Sensors
#define HAS_FILAMENT_WIDTH_SENSOR (PIN_EXISTS(FILWIDTH))

View file

@ -2541,7 +2541,7 @@ void MarlinSettings::reset() {
//
#if ENABLED(EDITABLE_SERVO_ANGLES)
COPY(servo_angles, base_servo_angles);
COPY(servo_angles, base_servo_angles); // When not editable only one copy of servo angles exists
#endif
//
@ -3091,7 +3091,7 @@ void MarlinSettings::reset() {
#endif
#elif ENABLED(SWITCHING_NOZZLE)
case SWITCHING_NOZZLE_SERVO_NR:
#elif (ENABLED(BLTOUCH) && defined(BLTOUCH_ANGLES)) || (defined(Z_SERVO_ANGLES) && defined(Z_PROBE_SERVO_NR))
#elif ENABLED(BLTOUCH) || (HAS_Z_SERVO_PROBE && defined(Z_SERVO_ANGLES))
case Z_PROBE_SERVO_NR:
#endif
CONFIG_ECHO_START();

View file

@ -31,46 +31,65 @@
#if HAS_SERVO_ANGLES
#if ENABLED(SWITCHING_EXTRUDER)
#ifndef SWITCHING_EXTRUDER_E23_SERVO_NR
#define SWITCHING_EXTRUDER_E23_SERVO_NR -1
#endif
// Switching extruder can have 2 or 4 angles
#if EXTRUDERS > 3
#define REQ_ANGLES 4
#else
#define REQ_ANGLES 2
#endif
#define SADATA SWITCHING_EXTRUDER_SERVO_ANGLES
#define ASRC(N,E) (SWITCHING_EXTRUDER_SERVO_NR == N ? asrc[E] : SWITCHING_EXTRUDER_E23_SERVO_NR == N ? asrc[E+2] : 0)
#elif ENABLED(SWITCHING_NOZZLE)
#define SADATA SWITCHING_NOZZLE_SERVO_ANGLES
#define ASRC(N,E) (SWITCHING_NOZZLE_SERVO_NR == N ? asrc[E] : 0)
#elif defined(Z_PROBE_SERVO_NR)
#define ASRC(N,E) (Z_PROBE_SERVO_NR == N ? asrc[E] : 0)
constexpr uint16_t sase[] = SWITCHING_EXTRUDER_SERVO_ANGLES;
static_assert(COUNT(sase) == REQ_ANGLES, "SWITCHING_EXTRUDER_SERVO_ANGLES needs " STRINGIFY(REQ_ANGLES) " angles.");
#else
constexpr uint16_t sase[4] = { 0 };
#endif
#if ENABLED(SWITCHING_NOZZLE)
constexpr uint16_t sasn[] = SWITCHING_NOZZLE_SERVO_ANGLES;
static_assert(COUNT(sasn) == 2, "SWITCHING_NOZZLE_SERVO_ANGLES needs 2 angles.");
#else
constexpr uint16_t sasn[2] = { 0 };
#endif
#ifdef Z_PROBE_SERVO_NR
#if ENABLED(BLTOUCH)
#include "../feature/bltouch.h"
#undef Z_SERVO_ANGLES
#define Z_SERVO_ANGLES { BLTOUCH_DEPLOY, BLTOUCH_STOW }
#endif
#ifdef BLTOUCH_ANGLES
#define SADATA BLTOUCH_ANGLES
#elif defined(Z_SERVO_ANGLES)
#define SADATA Z_SERVO_ANGLES
#else
#error "Servo angles are needed!"
#endif
constexpr uint16_t sazp[] = Z_SERVO_ANGLES;
static_assert(COUNT(sazp) == 2, "Z_SERVO_ANGLES needs 2 angles.");
#else
constexpr uint16_t sazp[2] = { 0 };
#endif
#ifndef SWITCHING_EXTRUDER_SERVO_NR
#define SWITCHING_EXTRUDER_SERVO_NR -1
#endif
#ifndef SWITCHING_EXTRUDER_E23_SERVO_NR
#define SWITCHING_EXTRUDER_E23_SERVO_NR -1
#endif
#ifndef SWITCHING_NOZZLE_SERVO_NR
#define SWITCHING_NOZZLE_SERVO_NR -1
#endif
#ifndef Z_PROBE_SERVO_NR
#define Z_PROBE_SERVO_NR -1
#endif
#define ASRC(N,I) ( \
N == SWITCHING_EXTRUDER_SERVO_NR ? sase[I] \
: N == SWITCHING_EXTRUDER_E23_SERVO_NR ? sase[I+2] \
: N == SWITCHING_NOZZLE_SERVO_NR ? sasn[I] \
: N == Z_PROBE_SERVO_NR ? sazp[I] \
: 0 )
#if ENABLED(EDITABLE_SERVO_ANGLES)
extern uint16_t servo_angles[NUM_SERVOS][2];
#define BASE_SERVO_ANGLES base_servo_angles
#define CONST_SERVO_ANGLES base_servo_angles
#else
#define BASE_SERVO_ANGLES servo_angles
#define CONST_SERVO_ANGLES servo_angles
#endif
constexpr uint16_t asrc[] = SADATA;
#if REQ_ANGLES
static_assert(COUNT(asrc) == REQ_ANGLES, "SWITCHING_EXTRUDER_SERVO_ANGLES needs " STRINGIFY(REQ_ANGLES) " angles.");
#endif
constexpr uint16_t BASE_SERVO_ANGLES [NUM_SERVOS][2] = {
constexpr uint16_t CONST_SERVO_ANGLES [NUM_SERVOS][2] = {
{ ASRC(0,0), ASRC(0,1) }
#if NUM_SERVOS > 1
, { ASRC(1,0), ASRC(1,1) }