New board STM32F407 (#14994)
This commit is contained in:
chzj333
Scott Lahteine
parent
bb4a252567
commit
0b47558a09
6 changed files with 358 additions and 11 deletions
|
|
@ -22,7 +22,6 @@
|
|||
*/
|
||||
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
|
||||
|
||||
|
||||
#include "../../inc/MarlinConfig.h"
|
||||
|
||||
#include <SPI.h>
|
||||
|
|
@ -73,16 +72,22 @@ void spiInit(uint8_t spiRate) {
|
|||
// Use datarates Marlin uses
|
||||
uint32_t clock;
|
||||
switch (spiRate) {
|
||||
case SPI_FULL_SPEED: clock = 20000000; break; // 13.9mhz=20000000 6.75mhz=10000000 3.38mhz=5000000 .833mhz=1000000
|
||||
case SPI_HALF_SPEED: clock = 5000000; break;
|
||||
case SPI_QUARTER_SPEED: clock = 2500000; break;
|
||||
case SPI_EIGHTH_SPEED: clock = 1250000; break;
|
||||
case SPI_SPEED_5: clock = 625000; break;
|
||||
case SPI_SPEED_6: clock = 300000; break;
|
||||
default:
|
||||
clock = 4000000; // Default from the SPI library
|
||||
case SPI_FULL_SPEED: clock = 20000000; break; // 13.9mhz=20000000 6.75mhz=10000000 3.38mhz=5000000 .833mhz=1000000
|
||||
case SPI_HALF_SPEED: clock = 5000000; break;
|
||||
case SPI_QUARTER_SPEED: clock = 2500000; break;
|
||||
case SPI_EIGHTH_SPEED: clock = 1250000; break;
|
||||
case SPI_SPEED_5: clock = 625000; break;
|
||||
case SPI_SPEED_6: clock = 300000; break;
|
||||
default:
|
||||
clock = 4000000; // Default from the SPI library
|
||||
}
|
||||
spiConfig = SPISettings(clock, MSBFIRST, SPI_MODE0);
|
||||
#if defined(MISO_PIN) && defined(SDSS) && defined(MOSI_PIN) && defined(SCK_PIN)
|
||||
SPI.setMISO(MISO_PIN);
|
||||
SPI.setSSEL(SDSS);
|
||||
SPI.setMOSI(MOSI_PIN);
|
||||
SPI.setSCLK(SCK_PIN);
|
||||
#endif
|
||||
SPI.begin();
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -290,6 +290,7 @@
|
|||
#define BOARD_BLACK_STM32F407ZE 4205 // BLACK_STM32F407ZE
|
||||
#define BOARD_STEVAL 4206 // STEVAL-3DP001V1 3D PRINTER BOARD
|
||||
#define BOARD_BIGTREE_SKR_PRO_V1_1 4207 // BigTreeTech SKR Pro v1.1 (STM32F407ZG)
|
||||
#define BOARD_BIGTREE_BTT002_V1_0 4208 // BigTreeTech BTT002 v1.0 (STM32F407VE)
|
||||
|
||||
//
|
||||
// ARM Cortex M7
|
||||
|
|
|
|||
|
|
@ -502,6 +502,8 @@
|
|||
#include "stm32/pins_STEVAL.h" // STM32F4 env:STM32F4
|
||||
#elif MB(BIGTREE_SKR_PRO_V1_1)
|
||||
#include "stm32/pins_BIGTREE_SKR_PRO_V1.1.h" // STM32F4 env:BIGTREE_SKR_PRO
|
||||
#elif MB(BIGTREE_BTT002_V1_0)
|
||||
#include "stm32/pins_BIGTREE_BTT002_V1.0.h" // STM32F4 env:BIGTREE_BTTOO2
|
||||
|
||||
//
|
||||
// ARM Cortex M7
|
||||
|
|
|
|||
254
Marlin/src/pins/stm32/pins_BIGTREE_BTT002_V1.0.h
Normal file
254
Marlin/src/pins/stm32/pins_BIGTREE_BTT002_V1.0.h
Normal file
|
|
@ -0,0 +1,254 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#ifndef TARGET_STM32F4
|
||||
#error "Oops! Select an STM32F4 board in 'Tools > Board.'"
|
||||
#elif HOTENDS > 3 || E_STEPPERS > 3
|
||||
#error "BIGTREE SKR Pro V1.1 supports up to 3 hotends / E-steppers."
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "BIGTREE Btt002 1.0"
|
||||
|
||||
#define SRAM_EEPROM_EMULATION
|
||||
|
||||
// Ignore temp readings during development.
|
||||
//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
#define SERVO0_PIN PC3
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_MIN_PIN PD3
|
||||
#define X_MAX_PIN PD3
|
||||
#define Y_MIN_PIN PD2
|
||||
#define Y_MAX_PIN PD2
|
||||
#define Z_MIN_PIN PD1
|
||||
#define Z_MAX_PIN PD1
|
||||
|
||||
//
|
||||
// Z Probe must be this pins ##
|
||||
//
|
||||
#ifndef Z_MIN_PROBE_PIN
|
||||
#define Z_MIN_PROBE_PIN PD1
|
||||
#endif
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_STEP_PIN PA9
|
||||
#define X_DIR_PIN PA10
|
||||
#define X_ENABLE_PIN PA8
|
||||
#ifndef X_CS_PIN
|
||||
#define X_CS_PIN PE2
|
||||
#endif
|
||||
|
||||
#define Y_STEP_PIN PC8
|
||||
#define Y_DIR_PIN PC9
|
||||
#define Y_ENABLE_PIN PC7
|
||||
#ifndef Y_CS_PIN
|
||||
#define Y_CS_PIN PE3
|
||||
#endif
|
||||
|
||||
#define Z_STEP_PIN PD15
|
||||
#define Z_DIR_PIN PC6
|
||||
#define Z_ENABLE_PIN PD14
|
||||
#ifndef Z_CS_PIN
|
||||
#define Z_CS_PIN PE4
|
||||
#endif
|
||||
|
||||
#define E0_STEP_PIN PD12
|
||||
#define E0_DIR_PIN PD13
|
||||
#define E0_ENABLE_PIN PD11
|
||||
#ifndef E0_CS_PIN
|
||||
#define E0_CS_PIN PD7
|
||||
#endif
|
||||
|
||||
/*
|
||||
//SKR_PRO_V1.1
|
||||
#define E1_STEP_PIN PD15
|
||||
#define E1_DIR_PIN PE7
|
||||
#define E1_ENABLE_PIN PA3
|
||||
#ifndef E1_CS_PIN
|
||||
#define E1_CS_PIN PG15
|
||||
#endif
|
||||
|
||||
#define E2_STEP_PIN PD13
|
||||
#define E2_DIR_PIN PG9
|
||||
#define E2_ENABLE_PIN PF0
|
||||
#ifndef E2_CS_PIN
|
||||
#define E2_CS_PIN PG12
|
||||
#endif
|
||||
*/
|
||||
//
|
||||
// Software SPI pins for TMC2130 stepper drivers
|
||||
//
|
||||
#if ENABLED(TMC_USE_SW_SPI)
|
||||
#ifndef TMC_SW_MOSI
|
||||
#define TMC_SW_MOSI PB15
|
||||
#endif
|
||||
#ifndef TMC_SW_MISO
|
||||
#define TMC_SW_MISO PB14
|
||||
#endif
|
||||
#ifndef TMC_SW_SCK
|
||||
#define TMC_SW_SCK PB13
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if HAS_TMC220x
|
||||
/**
|
||||
* TMC2208/TMC2209 stepper drivers
|
||||
*
|
||||
* Hardware serial communication ports.
|
||||
* If undefined software serial is used according to the pins below
|
||||
*/
|
||||
//#define X_HARDWARE_SERIAL Serial1
|
||||
//#define X2_HARDWARE_SERIAL Serial1
|
||||
//#define Y_HARDWARE_SERIAL Serial1
|
||||
//#define Y2_HARDWARE_SERIAL Serial1
|
||||
//#define Z_HARDWARE_SERIAL Serial1
|
||||
//#define Z2_HARDWARE_SERIAL Serial1
|
||||
//#define E0_HARDWARE_SERIAL Serial1
|
||||
//#define E1_HARDWARE_SERIAL Serial1
|
||||
//#define E2_HARDWARE_SERIAL Serial1
|
||||
//#define E3_HARDWARE_SERIAL Serial1
|
||||
//#define E4_HARDWARE_SERIAL Serial1
|
||||
|
||||
//
|
||||
// Software serial ##
|
||||
//
|
||||
#define X_SERIAL_TX_PIN PE2
|
||||
#define X_SERIAL_RX_PIN PE2
|
||||
|
||||
#define Y_SERIAL_TX_PIN PE3
|
||||
#define Y_SERIAL_RX_PIN PE3
|
||||
|
||||
#define Z_SERIAL_TX_PIN PE4
|
||||
#define Z_SERIAL_RX_PIN PE4
|
||||
|
||||
#define E0_SERIAL_TX_PIN PD7
|
||||
#define E0_SERIAL_RX_PIN PD7
|
||||
|
||||
//#define E1_SERIAL_TX_PIN PD1
|
||||
//#define E1_SERIAL_RX_PIN PD1
|
||||
|
||||
//#define E2_SERIAL_TX_PIN PD6
|
||||
//#define E2_SERIAL_RX_PIN PD6
|
||||
#endif
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN PA2 // T1 <-> E0
|
||||
#define TEMP_1_PIN PA0 // T2 <-> E1
|
||||
//#define TEMP_2_PIN PC2 // T3 <-> E2 SKR_PRO
|
||||
#define TEMP_BED_PIN PA1 // T0 <-> Bed
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN PE6 // Heater0
|
||||
//#define HEATER_1_PIN PD14 // Heater1
|
||||
//#define HEATER_2_PIN PB0 // Heater1
|
||||
#define HEATER_BED_PIN PE5 // Hotbed
|
||||
#define FAN_PIN PB9 // Fan0
|
||||
#define FAN1_PIN PB8 // Fan1
|
||||
//#define FAN2_PIN PE6 // Fan2
|
||||
|
||||
// HAL SPI pins group
|
||||
#define SCK_PIN PA5 // SPI SCLK
|
||||
#define MYSSEL PA4 // SPI SSEL
|
||||
#define MISO_PIN PA6 // SPI MISO
|
||||
#define MOSI_PIN PA7 // SPI MOSI
|
||||
|
||||
//
|
||||
// Misc. Functions
|
||||
//
|
||||
#define SDSS PA4
|
||||
|
||||
/**
|
||||
* -------------------------------------SKR_MK3-----------------------------------------------
|
||||
* _____ _____ |
|
||||
* PA3 | · · | GND 5V | · · | GND |
|
||||
* NRESET | · · | PC4(SD_DET) (LCD_D7) PE13 | · · | PE12 (LCD_D6) |
|
||||
* (MOSI)PA7 | · · | PB0(BTN_EN2) (LCD_D5) PE11 | · · | PE10 (LCD_D4) |
|
||||
* (SD_SS)PA4 | · · | PC5(BTN_EN1) (LCD_RS) PE8 | · · | PE9 (LCD_EN) |
|
||||
* (SCK)PA5 | · · | PA6(MISO) (BTN_ENC) PB1 | · · | PE7 (BEEPER) |
|
||||
* ￣￣ ￣￣ |
|
||||
* EXP2 EXP1 |
|
||||
* ---------------------------------------------------------------------------------------------
|
||||
*/
|
||||
//
|
||||
// LCDs and Controllers
|
||||
//
|
||||
#if HAS_SPI_LCD
|
||||
#define BEEPER_PIN PE7
|
||||
#define BTN_ENC PB1
|
||||
|
||||
#if ENABLED(CR10_STOCKDISPLAY)
|
||||
#define LCD_PINS_RS PE12
|
||||
|
||||
#define BTN_EN1 PE9
|
||||
#define BTN_EN2 PE10
|
||||
|
||||
#define LCD_PINS_ENABLE PE13
|
||||
#define LCD_PINS_D4 PE11
|
||||
|
||||
#else
|
||||
|
||||
#define LCD_PINS_RS PE8
|
||||
|
||||
#define BTN_EN1 PC5
|
||||
#define BTN_EN2 PB0
|
||||
#define SD_DETECT_PIN PC4
|
||||
|
||||
#define LCD_SDSS PA4
|
||||
|
||||
#define LCD_PINS_ENABLE PE9
|
||||
#define LCD_PINS_D4 PE10
|
||||
|
||||
#if ENABLED(ULTIPANEL)
|
||||
#define LCD_PINS_D5 PE11
|
||||
#define LCD_PINS_D6 PE12
|
||||
#define LCD_PINS_D7 PE13
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
// Alter timing for graphical display
|
||||
#if HAS_GRAPHICAL_LCD
|
||||
#ifndef ST7920_DELAY_1
|
||||
#define ST7920_DELAY_1 DELAY_NS(96)
|
||||
#endif
|
||||
#ifndef ST7920_DELAY_2
|
||||
#define ST7920_DELAY_2 DELAY_NS(48)
|
||||
#endif
|
||||
#ifndef ST7920_DELAY_3
|
||||
#define ST7920_DELAY_3 DELAY_NS(600)
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // HAS_SPI_LCD
|
||||
65
buildroot/share/PlatformIO/boards/BigTree_Btt002.json
Normal file
65
buildroot/share/PlatformIO/boards/BigTree_Btt002.json
Normal file
|
|
@ -0,0 +1,65 @@
|
|||
{
|
||||
"build": {
|
||||
"core": "stm32",
|
||||
"cpu": "cortex-m4",
|
||||
"extra_flags": "-DSTM32F407xx",
|
||||
"f_cpu": "168000000L",
|
||||
"hwids": [
|
||||
[
|
||||
"0x1EAF",
|
||||
"0x0003"
|
||||
],
|
||||
[
|
||||
"0x0483",
|
||||
"0x3748"
|
||||
]
|
||||
],
|
||||
"ldscript": "stm32f407xg.ld",
|
||||
"mcu": "stm32f407vet6",
|
||||
"variant": "BIGTREE_GENERIC_STM32F407_5X"
|
||||
},
|
||||
"debug": {
|
||||
"jlink_device": "STM32F407VE",
|
||||
"openocd_target": "stm32f4x",
|
||||
"svd_path": "STM32F40x.svd",
|
||||
"tools": {
|
||||
"stlink": {
|
||||
"server": {
|
||||
"arguments": [
|
||||
"-f",
|
||||
"scripts/interface/stlink.cfg",
|
||||
"-c",
|
||||
"transport select hla_swd",
|
||||
"-f",
|
||||
"scripts/target/stm32f4x.cfg",
|
||||
"-c",
|
||||
"reset_config none"
|
||||
],
|
||||
"executable": "bin/openocd",
|
||||
"package": "tool-openocd"
|
||||
}
|
||||
}
|
||||
}
|
||||
},
|
||||
"frameworks": [
|
||||
"arduino",
|
||||
"stm32cube"
|
||||
],
|
||||
"name": "STM32F407VE (64k RAM. 512k Flash)",
|
||||
"upload": {
|
||||
"disable_flushing": false,
|
||||
"maximum_ram_size": 65536,
|
||||
"maximum_size": 524288,
|
||||
"protocol": "stlink",
|
||||
"protocols": [
|
||||
"stlink",
|
||||
"dfu",
|
||||
"jlink"
|
||||
],
|
||||
"require_upload_port": true,
|
||||
"use_1200bps_touch": false,
|
||||
"wait_for_upload_port": false
|
||||
},
|
||||
"url": "http://www.st.com/en/microcontrollers/stm32f407zg.html",
|
||||
"vendor": "Generic"
|
||||
}
|
||||
|
|
@ -477,6 +477,26 @@ lib_ignore = Adafruit NeoPixel, SailfishLCD, SailfishRGB_LED, SlowSoftI2CMaster
|
|||
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32>
|
||||
monitor_speed = 250000
|
||||
|
||||
#
|
||||
# BIGTREE_SKR_BTT002 (STM32F407VET6 ARM Cortex-M4)
|
||||
#
|
||||
[env:BIGTREE_BTT002]
|
||||
platform = ststm32@5.4.3
|
||||
framework = arduino
|
||||
board = BigTree_BTT002
|
||||
extra_scripts = pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
|
||||
build_flags = ${common.build_flags}
|
||||
-DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 -DUSB_PRODUCT=\"STM32F407VE\"
|
||||
-DTARGET_STM32F4 -DSTM32F407_5VX -DVECT_TAB_OFFSET=0x8000
|
||||
-DHAVE_HWSERIAL2
|
||||
-DHAVE_HWSERIAL3
|
||||
-DPIN_SERIAL2_RX=PD_6
|
||||
-DPIN_SERIAL2_TX=PD_5
|
||||
lib_deps = ${common.lib_deps}
|
||||
lib_ignore = Adafruit NeoPixel, SailfishLCD, SailfishRGB_LED, SlowSoftI2CMaster
|
||||
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32>
|
||||
monitor_speed = 250000
|
||||
|
||||
#
|
||||
# Teensy 3.1 / 3.2 (ARM Cortex-M4)
|
||||
#
|
||||
|
|
@ -516,7 +536,7 @@ build_flags = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py -DMCU_ST
|
|||
-DDEBUG_LEVEL=0
|
||||
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
|
||||
#-<frameworks>
|
||||
lib_ignore = Adafruit NeoPixel, LiquidCrystal, LiquidTWI2, TMCStepper, TMC26XStepper, U8glib-HAL
|
||||
lib_ignore = Adafruit NeoPixel, LiquidCrystal, LiquidTWI2, TMCStepper, U8glib-HAL
|
||||
|
||||
#
|
||||
# Espressif ESP32
|
||||
|
|
@ -531,7 +551,7 @@ upload_port = /dev/ttyUSB0
|
|||
lib_deps =
|
||||
AsyncTCP=https://github.com/me-no-dev/AsyncTCP/archive/master.zip
|
||||
ESPAsyncWebServer=https://github.com/me-no-dev/ESPAsyncWebServer/archive/master.zip
|
||||
lib_ignore = TMC26XStepper, LiquidCrystal, LiquidTWI2, SailfishLCD, SailfishRGB_LED
|
||||
lib_ignore = LiquidCrystal, LiquidTWI2, SailfishLCD, SailfishRGB_LED
|
||||
src_filter = ${common.default_src_filter} +<src/HAL/HAL_ESP32>
|
||||
|
||||
#
|
||||
|
|
|
|||
Reference in a new issue