ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED => SD_ABORT_ON_ENDSTOP_HIT

Marlin/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

Marlin/src/gcode/config/M540.cpp

@@ -22,7 +22,7 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
+#if ENABLED(SD_ABORT_ON_ENDSTOP_HIT)
 
 #include "../gcode.h"
 #include "../../module/stepper.h"
@@ -37,4 +37,4 @@ void GcodeSuite::M540() {
 
 }
 
-#endif // ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+#endif // SD_ABORT_ON_ENDSTOP_HIT

Marlin/src/gcode/gcode.cpp

@@ -658,7 +658,7 @@ void GcodeSuite::process_parsed_command(
         case 524: M524(); break;                                   // M524: Abort the current SD print job
       #endif
 
-      #if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
+      #if ENABLED(SD_ABORT_ON_ENDSTOP_HIT)
         case 540: M540(); break;                                  // M540: Set abort on endstop hit for SD printing
       #endif
 

Marlin/src/gcode/gcode.h

@@ -214,7 +214,7 @@
  * M503 - Print the current settings (in memory): "M503 S<verbose>". S0 specifies compact output.
  * M504 - Validate EEPROM contents. (Requires EEPROM_SETTINGS)
  * M524 - Abort the current SD print job (started with M24)
- * M540 - Enable/disable SD card abort on endstop hit: "M540 S<state>". (Requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
+ * M540 - Enable/disable SD card abort on endstop hit: "M540 S<state>". (Requires SD_ABORT_ON_ENDSTOP_HIT)
  * M569 - Enable stealthChop on an axis. (Requires at least one _DRIVER_TYPE to be TMC2130 or TMC2208)
  * M600 - Pause for filament change: "M600 X<pos> Y<pos> Z<raise> E<first_retract> L<later_retract>". (Requires ADVANCED_PAUSE_FEATURE)
  * M603 - Configure filament change: "M603 T<tool> U<unload_length> L<load_length>". (Requires ADVANCED_PAUSE_FEATURE)
@@ -769,7 +769,7 @@ private:
     static void M524();
   #endif
 
-  #if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
+  #if ENABLED(SD_ABORT_ON_ENDSTOP_HIT)
     static void M540();
   #endif
 

Marlin/src/inc/SanityCheck.h

@@ -358,6 +358,8 @@
   #error "DUAL_NOZZLE_DUPLICATION_MODE is now MULTI_NOZZLE_DUPLICATION. Please update your configuration."
 #elif defined(MENU_ITEM_CASE_LIGHT)
   #error "MENU_ITEM_CASE_LIGHT is now CASE_LIGHT_MENU. Please update your configuration."
+#elif defined(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
+  #error "ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED is now SD_ABORT_ON_ENDSTOP_HIT. Please update your Configuration_adv.h."
 #endif
 
 #define BOARD_MKS_13     -47

Marlin/src/lcd/menu/menu_advanced.cpp

@@ -674,7 +674,7 @@ void menu_advanced_settings() {
   #endif
 
   // M540 S - Abort on endstop hit when SD printing
-  #if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
+  #if ENABLED(SD_ABORT_ON_ENDSTOP_HIT)
     MENU_ITEM_EDIT(bool, MSG_ENDSTOP_ABORT, &planner.abort_on_endstop_hit);
   #endif
 

Marlin/src/module/endstops.cpp

@@ -36,7 +36,7 @@
   #include HAL_PATH(../HAL, endstop_interrupts.h)
 #endif
 
-#if BOTH(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED, SDSUPPORT)
+#if BOTH(SD_ABORT_ON_ENDSTOP_HIT, SDSUPPORT)
   #include "printcounter.h" // for print_job_timer
 #endif
 
@@ -365,7 +365,7 @@ void Endstops::event_handler() {
       ui.status_printf_P(0, PSTR(MSG_LCD_ENDSTOPS " %c %c %c %c"), chrX, chrY, chrZ, chrP);
     #endif
 
-    #if BOTH(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED, SDSUPPORT)
+    #if BOTH(SD_ABORT_ON_ENDSTOP_HIT, SDSUPPORT)
       if (planner.abort_on_endstop_hit) {
         card.stopSDPrint();
         quickstop_stepper();

Marlin/src/module/planner.cpp

@@ -139,7 +139,7 @@ float Planner::steps_to_mm[XYZE_N];           // (mm) Millimeters per step
   #endif
 #endif
 
-#if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
+#if ENABLED(SD_ABORT_ON_ENDSTOP_HIT)
   bool Planner::abort_on_endstop_hit = false;
 #endif
 

Marlin/src/module/planner.h

@@ -287,7 +287,7 @@ class Planner {
 
     static skew_factor_t skew_factor;
 
-    #if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
+    #if ENABLED(SD_ABORT_ON_ENDSTOP_HIT)
       static bool abort_on_endstop_hit;
     #endif
 

buildroot/share/tests/LPC1768-tests

@@ -53,7 +53,7 @@ opt_enable COREYX USE_XMAX_PLUG DAC_MOTOR_CURRENT_DEFAULT \
            AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 EEPROM_SETTINGS \
            FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR FAN_SOFT_PWM \
            SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER FAN_KICKSTART_TIME \
-           ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED ADVANCED_OK GCODE_MACROS \
+           SD_ABORT_ON_ENDSTOP_HIT ADVANCED_OK GCODE_MACROS \
            VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL \
            EXTRA_FAN_SPEED FWRETRACT Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS \
            MENU_ADDAUTOSTART SDCARD_SORT_ALPHA

buildroot/share/tests/LPC1769-tests

@@ -31,7 +31,7 @@ opt_enable COREYX USE_XMAX_PLUG DAC_MOTOR_CURRENT_DEFAULT \
            AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 EEPROM_SETTINGS \
            FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR FAN_SOFT_PWM \
            SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER FAN_KICKSTART_TIME \
-           ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED ADVANCED_OK GCODE_MACROS \
+           SD_ABORT_ON_ENDSTOP_HIT ADVANCED_OK GCODE_MACROS \
            VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL \
            EXTRA_FAN_SPEED FWRETRACT MENU_ADDAUTOSTART SDCARD_SORT_ALPHA
 opt_set FAN_MIN_PWM 50

buildroot/share/tests/megaatmega2560-tests

@@ -158,7 +158,7 @@ opt_enable COREYX USE_XMAX_PLUG \
            ENDSTOP_INTERRUPTS_FEATURE ENDSTOP_NOISE_THRESHOLD FAN_SOFT_PWM SDSUPPORT \
            SWITCHING_TOOLHEAD NUM_SERVOS DEBUG_LEVELING_FEATURE \
            SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER \
-           ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED ADVANCED_OK \
+           SD_ABORT_ON_ENDSTOP_HIT ADVANCED_OK \
            VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL \
            EXTRA_FAN_SPEED FWRETRACT MENU_ADDAUTOSTART SDCARD_SORT_ALPHA
 opt_set FAN_MIN_PWM 50

config/default/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/3DFabXYZ/Migbot/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/AliExpress/UM2pExt/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  #define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  #define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Anet/A2/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Anet/A2plus/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Anet/A6/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Anet/A8/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Anet/A8plus/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Anet/E16/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/AnyCubic/i3/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/ArmEd/Configuration_adv.h

@@ -914,7 +914,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/BIBO/TouchX/cyclops/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/BIBO/TouchX/default/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/BQ/Hephestos/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -918,7 +918,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/BQ/WITBOX/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Cartesio/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Creality/CR-10/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Creality/CR-10S/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Creality/CR-10_5S/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Creality/CR-10mini/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Creality/CR-8/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Creality/Ender-2/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Creality/Ender-3/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Creality/Ender-4/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Dagoma/Disco Ultimate/Configuration_adv.h

@@ -909,7 +909,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Einstart-S/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Felix/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/FlashForge/CreatorPro/Configuration_adv.h

@@ -909,7 +909,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/FolgerTech/i3-2020/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Formbot/Raptor/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Formbot/T_Rex_2+/Configuration_adv.h

@@ -914,7 +914,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Formbot/T_Rex_3/Configuration_adv.h

@@ -914,7 +914,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Geeetech/A10M/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Geeetech/A20M/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Geeetech/MeCreator2/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Infitary/i3-M508/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/JGAurora/A5/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/MakerParts/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  #define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  #define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Malyan/M150/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Malyan/M200/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Micromake/C1/enhanced/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Mks/Robin/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Mks/Sbase/Configuration_adv.h

@@ -911,7 +911,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/RapideLite/RL200/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/RigidBot/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/SCARA/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Sanguinololu/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/TheBorg/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/TinyBoy2/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Tronxy/X3A/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Tronxy/X5S-2E/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/UltiMachine/Archim1/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/UltiMachine/Archim2/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/VORONDesign/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Velleman/K8200/Configuration_adv.h

@@ -923,7 +923,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Velleman/K8400/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/WASP/PowerWASP/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/Wanhao/Duplicator 6/Configuration_adv.h

@@ -912,7 +912,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/delta/Anycubic/Kossel/Configuration_adv.h

@@ -909,7 +909,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h

@@ -909,7 +909,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/delta/FLSUN/kossel/Configuration_adv.h

@@ -909,7 +909,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h

@@ -909,7 +909,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h

@@ -909,7 +909,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/delta/MKS/SBASE/Configuration_adv.h

@@ -909,7 +909,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/delta/Tevo Little Monster/Configuration_adv.h

@@ -909,7 +909,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/delta/generic/Configuration_adv.h

@@ -909,7 +909,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/delta/kossel_mini/Configuration_adv.h

@@ -908,7 +908,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/delta/kossel_xl/Configuration_adv.h

@@ -909,7 +909,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/gCreate/gMax1.5+/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/makibox/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/tvrrug/Round2/Configuration_adv.h

@@ -910,7 +910,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.

config/examples/wt150/Configuration_adv.h

@@ -911,7 +911,7 @@
    * This feature must be enabled with "M540 S1" or from the LCD menu.
    * To have any effect, endstops must be enabled during SD printing.
    */
-  //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+  //#define SD_ABORT_ON_ENDSTOP_HIT
 
   /**
    * This option makes it easier to print the same SD Card file again.