Add 4th extruder
This commit is contained in:
parent
54d5b52a2e
commit
0ebf896070
16 changed files with 614 additions and 219 deletions
|
@ -44,7 +44,7 @@
|
||||||
// The following define selects which electronics board you have.
|
// The following define selects which electronics board you have.
|
||||||
// Please choose the name from boards.h that matches your setup
|
// Please choose the name from boards.h that matches your setup
|
||||||
#ifndef MOTHERBOARD
|
#ifndef MOTHERBOARD
|
||||||
#define MOTHERBOARD BOARD_ULTIMAKER
|
#define MOTHERBOARD BOARD_AZTEEG_X3_PRO
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Define this to set a custom name for your generic Mendel,
|
// Define this to set a custom name for your generic Mendel,
|
||||||
|
@ -104,9 +104,10 @@
|
||||||
// 147 is Pt100 with 4k7 pullup
|
// 147 is Pt100 with 4k7 pullup
|
||||||
// 110 is Pt100 with 1k pullup (non standard)
|
// 110 is Pt100 with 1k pullup (non standard)
|
||||||
|
|
||||||
#define TEMP_SENSOR_0 -1
|
#define TEMP_SENSOR_0 1
|
||||||
#define TEMP_SENSOR_1 -1
|
#define TEMP_SENSOR_1 0
|
||||||
#define TEMP_SENSOR_2 0
|
#define TEMP_SENSOR_2 0
|
||||||
|
#define TEMP_SENSOR_3 0
|
||||||
#define TEMP_SENSOR_BED 0
|
#define TEMP_SENSOR_BED 0
|
||||||
|
|
||||||
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
|
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
|
||||||
|
@ -121,20 +122,22 @@
|
||||||
// The minimal temperature defines the temperature below which the heater will not be enabled It is used
|
// The minimal temperature defines the temperature below which the heater will not be enabled It is used
|
||||||
// to check that the wiring to the thermistor is not broken.
|
// to check that the wiring to the thermistor is not broken.
|
||||||
// Otherwise this would lead to the heater being powered on all the time.
|
// Otherwise this would lead to the heater being powered on all the time.
|
||||||
#define HEATER_0_MINTEMP 5
|
#define HEATER_0_MINTEMP 5 // degC
|
||||||
#define HEATER_1_MINTEMP 5
|
#define HEATER_1_MINTEMP 5 // degC
|
||||||
#define HEATER_2_MINTEMP 5
|
#define HEATER_2_MINTEMP 5 // degC
|
||||||
#define BED_MINTEMP 5
|
#define HEATER_3_MINTEMP 5 // degC
|
||||||
|
#define BED_MINTEMP 5 // degC
|
||||||
|
|
||||||
// When temperature exceeds max temp, your heater will be switched off.
|
// When temperature exceeds max temp, your heater will be switched off.
|
||||||
// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure!
|
// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure!
|
||||||
// You should use MINTEMP for thermistor short/failure protection.
|
// You should use MINTEMP for thermistor short/failure protection.
|
||||||
#define HEATER_0_MAXTEMP 275
|
#define HEATER_0_MAXTEMP 275 // degC
|
||||||
#define HEATER_1_MAXTEMP 275
|
#define HEATER_1_MAXTEMP 275 // degC
|
||||||
#define HEATER_2_MAXTEMP 275
|
#define HEATER_2_MAXTEMP 275 // degC
|
||||||
#define BED_MAXTEMP 150
|
#define HEATER_3_MAXTEMP 275 // degC
|
||||||
|
#define BED_MAXTEMP 150 // degC
|
||||||
|
|
||||||
// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
|
// If your bed has low resistance e.g. 0.6 ohm and throws the fuse you can duty cycle it to reduce the
|
||||||
// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
|
// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
|
||||||
// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
|
// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
|
||||||
//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
|
//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
|
||||||
|
@ -221,7 +224,7 @@
|
||||||
//if PREVENT_DANGEROUS_EXTRUDE is on, you can still disable (uncomment) very long bits of extrusion separately.
|
//if PREVENT_DANGEROUS_EXTRUDE is on, you can still disable (uncomment) very long bits of extrusion separately.
|
||||||
#define PREVENT_LENGTHY_EXTRUDE
|
#define PREVENT_LENGTHY_EXTRUDE
|
||||||
|
|
||||||
#define EXTRUDE_MINTEMP 170
|
#define EXTRUDE_MINTEMP 170 // degC
|
||||||
#define EXTRUDE_MAXLENGTH (X_MAX_LENGTH+Y_MAX_LENGTH) //prevent extrusion of very large distances.
|
#define EXTRUDE_MAXLENGTH (X_MAX_LENGTH+Y_MAX_LENGTH) //prevent extrusion of very large distances.
|
||||||
|
|
||||||
/*================== Thermal Runaway Protection ==============================
|
/*================== Thermal Runaway Protection ==============================
|
||||||
|
@ -325,6 +328,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
||||||
#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
||||||
#define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
||||||
|
#define INVERT_E3_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
||||||
|
|
||||||
// ENDSTOP SETTINGS:
|
// ENDSTOP SETTINGS:
|
||||||
// Sets direction of endstops when homing; 1=MAX, -1=MIN
|
// Sets direction of endstops when homing; 1=MAX, -1=MIN
|
||||||
|
|
|
@ -77,7 +77,7 @@ void Config_StoreSettings()
|
||||||
EEPROM_WRITE_VAR(i,zprobe_zoffset);
|
EEPROM_WRITE_VAR(i,zprobe_zoffset);
|
||||||
#ifdef PIDTEMP
|
#ifdef PIDTEMP
|
||||||
float dummy = 0.0f;
|
float dummy = 0.0f;
|
||||||
for (int e = 0; e < 3; e++)
|
for (int e = 0; e < 4; e++)
|
||||||
{
|
{
|
||||||
if (e < EXTRUDERS)
|
if (e < EXTRUDERS)
|
||||||
{
|
{
|
||||||
|
@ -132,12 +132,15 @@ void Config_StoreSettings()
|
||||||
// Save filament sizes
|
// Save filament sizes
|
||||||
EEPROM_WRITE_VAR(i, volumetric_enabled);
|
EEPROM_WRITE_VAR(i, volumetric_enabled);
|
||||||
EEPROM_WRITE_VAR(i, filament_size[0]);
|
EEPROM_WRITE_VAR(i, filament_size[0]);
|
||||||
#if EXTRUDERS > 1
|
#if EXTRUDERS > 1
|
||||||
EEPROM_WRITE_VAR(i, filament_size[1]);
|
EEPROM_WRITE_VAR(i, filament_size[1]);
|
||||||
#if EXTRUDERS > 2
|
#if EXTRUDERS > 2
|
||||||
EEPROM_WRITE_VAR(i, filament_size[2]);
|
EEPROM_WRITE_VAR(i, filament_size[2]);
|
||||||
#endif//EXTRUDERS > 2
|
#if EXTRUDERS > 3
|
||||||
#endif//EXTRUDERS > 1
|
EEPROM_WRITE_VAR(i, filament_size[3]);
|
||||||
|
#endif //EXTRUDERS > 3
|
||||||
|
#endif //EXTRUDERS > 2
|
||||||
|
#endif //EXTRUDERS > 1
|
||||||
|
|
||||||
char ver2[4]=EEPROM_VERSION;
|
char ver2[4]=EEPROM_VERSION;
|
||||||
i=EEPROM_OFFSET;
|
i=EEPROM_OFFSET;
|
||||||
|
@ -280,8 +283,13 @@ SERIAL_ECHOLNPGM("Scaling factors:");
|
||||||
SERIAL_ECHO_START;
|
SERIAL_ECHO_START;
|
||||||
SERIAL_ECHOPAIR(" M200 T2 D", filament_size[2]);
|
SERIAL_ECHOPAIR(" M200 T2 D", filament_size[2]);
|
||||||
SERIAL_ECHOLN("");
|
SERIAL_ECHOLN("");
|
||||||
#endif//EXTRUDERS > 2
|
#if EXTRUDERS > 3
|
||||||
#endif//EXTRUDERS > 1
|
SERIAL_ECHO_START;
|
||||||
|
SERIAL_ECHOPAIR(" M200 T3 D", filament_size[3]);
|
||||||
|
SERIAL_ECHOLN("");
|
||||||
|
#endif //EXTRUDERS > 3
|
||||||
|
#endif //EXTRUDERS > 2
|
||||||
|
#endif //EXTRUDERS > 1
|
||||||
} else {
|
} else {
|
||||||
SERIAL_ECHOLNPGM("Filament settings: Disabled");
|
SERIAL_ECHOLNPGM("Filament settings: Disabled");
|
||||||
}
|
}
|
||||||
|
@ -336,7 +344,7 @@ void Config_RetrieveSettings()
|
||||||
EEPROM_READ_VAR(i,zprobe_zoffset);
|
EEPROM_READ_VAR(i,zprobe_zoffset);
|
||||||
#ifdef PIDTEMP
|
#ifdef PIDTEMP
|
||||||
float dummy = 0.0f;
|
float dummy = 0.0f;
|
||||||
for (int e = 0; e < 3; e++) // 3 = max extruders supported by marlin
|
for (int e = 0; e < 4; e++) // 4 = max extruders supported by marlin
|
||||||
{
|
{
|
||||||
if (e < EXTRUDERS)
|
if (e < EXTRUDERS)
|
||||||
{
|
{
|
||||||
|
@ -403,8 +411,11 @@ void Config_RetrieveSettings()
|
||||||
EEPROM_READ_VAR(i, filament_size[1]);
|
EEPROM_READ_VAR(i, filament_size[1]);
|
||||||
#if EXTRUDERS > 2
|
#if EXTRUDERS > 2
|
||||||
EEPROM_READ_VAR(i, filament_size[2]);
|
EEPROM_READ_VAR(i, filament_size[2]);
|
||||||
#endif//EXTRUDERS > 2
|
#if EXTRUDERS > 3
|
||||||
#endif//EXTRUDERS > 1
|
EEPROM_READ_VAR(i, filament_size[3]);
|
||||||
|
#endif //EXTRUDERS > 3
|
||||||
|
#endif //EXTRUDERS > 2
|
||||||
|
#endif //EXTRUDERS > 1
|
||||||
calculate_volumetric_multipliers();
|
calculate_volumetric_multipliers();
|
||||||
// Call updatePID (similar to when we have processed M301)
|
// Call updatePID (similar to when we have processed M301)
|
||||||
updatePID();
|
updatePID();
|
||||||
|
@ -508,8 +519,11 @@ void Config_ResetDefault()
|
||||||
filament_size[1] = DEFAULT_NOMINAL_FILAMENT_DIA;
|
filament_size[1] = DEFAULT_NOMINAL_FILAMENT_DIA;
|
||||||
#if EXTRUDERS > 2
|
#if EXTRUDERS > 2
|
||||||
filament_size[2] = DEFAULT_NOMINAL_FILAMENT_DIA;
|
filament_size[2] = DEFAULT_NOMINAL_FILAMENT_DIA;
|
||||||
#endif//EXTRUDERS > 2
|
#if EXTRUDERS > 3
|
||||||
#endif//EXTRUDERS > 1
|
filament_size[3] = DEFAULT_NOMINAL_FILAMENT_DIA;
|
||||||
|
#endif //EXTRUDERS > 3
|
||||||
|
#endif //EXTRUDERS > 2
|
||||||
|
#endif //EXTRUDERS > 1
|
||||||
calculate_volumetric_multipliers();
|
calculate_volumetric_multipliers();
|
||||||
|
|
||||||
SERIAL_ECHO_START;
|
SERIAL_ECHO_START;
|
||||||
|
|
|
@ -75,9 +75,10 @@
|
||||||
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
|
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
|
||||||
// Multiple extruders can be assigned to the same pin in which case
|
// Multiple extruders can be assigned to the same pin in which case
|
||||||
// the fan will turn on when any selected extruder is above the threshold.
|
// the fan will turn on when any selected extruder is above the threshold.
|
||||||
#define EXTRUDER_0_AUTO_FAN_PIN -1
|
#define EXTRUDER_0_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_1_AUTO_FAN_PIN -1
|
#define EXTRUDER_1_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_2_AUTO_FAN_PIN -1
|
#define EXTRUDER_2_AUTO_FAN_PIN -1
|
||||||
|
#define EXTRUDER_3_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||||
|
|
||||||
|
@ -486,6 +487,10 @@ const unsigned int dropsegments=5; //everything with less than this number of st
|
||||||
#define THERMISTORHEATER_2 TEMP_SENSOR_2
|
#define THERMISTORHEATER_2 TEMP_SENSOR_2
|
||||||
#define HEATER_2_USES_THERMISTOR
|
#define HEATER_2_USES_THERMISTOR
|
||||||
#endif
|
#endif
|
||||||
|
#if TEMP_SENSOR_3 > 0
|
||||||
|
#define THERMISTORHEATER_3 TEMP_SENSOR_3
|
||||||
|
#define HEATER_3_USES_THERMISTOR
|
||||||
|
#endif
|
||||||
#if TEMP_SENSOR_BED > 0
|
#if TEMP_SENSOR_BED > 0
|
||||||
#define THERMISTORBED TEMP_SENSOR_BED
|
#define THERMISTORBED TEMP_SENSOR_BED
|
||||||
#define BED_USES_THERMISTOR
|
#define BED_USES_THERMISTOR
|
||||||
|
@ -499,6 +504,9 @@ const unsigned int dropsegments=5; //everything with less than this number of st
|
||||||
#if TEMP_SENSOR_2 == -1
|
#if TEMP_SENSOR_2 == -1
|
||||||
#define HEATER_2_USES_AD595
|
#define HEATER_2_USES_AD595
|
||||||
#endif
|
#endif
|
||||||
|
#if TEMP_SENSOR_3 == -1
|
||||||
|
#define HEATER_3_USES_AD595
|
||||||
|
#endif
|
||||||
#if TEMP_SENSOR_BED == -1
|
#if TEMP_SENSOR_BED == -1
|
||||||
#define BED_USES_AD595
|
#define BED_USES_AD595
|
||||||
#endif
|
#endif
|
||||||
|
@ -517,6 +525,10 @@ const unsigned int dropsegments=5; //everything with less than this number of st
|
||||||
#undef HEATER_2_MINTEMP
|
#undef HEATER_2_MINTEMP
|
||||||
#undef HEATER_2_MAXTEMP
|
#undef HEATER_2_MAXTEMP
|
||||||
#endif
|
#endif
|
||||||
|
#if TEMP_SENSOR_3 == 0
|
||||||
|
#undef HEATER_3_MINTEMP
|
||||||
|
#undef HEATER_3_MAXTEMP
|
||||||
|
#endif
|
||||||
#if TEMP_SENSOR_BED == 0
|
#if TEMP_SENSOR_BED == 0
|
||||||
#undef BED_MINTEMP
|
#undef BED_MINTEMP
|
||||||
#undef BED_MAXTEMP
|
#undef BED_MAXTEMP
|
||||||
|
|
|
@ -170,6 +170,13 @@ void manage_inactivity(bool ignore_stepper_queue=false);
|
||||||
#define disable_e2() /* nothing */
|
#define disable_e2() /* nothing */
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
#if (EXTRUDERS > 3) && defined(E3_ENABLE_PIN) && (E3_ENABLE_PIN > -1)
|
||||||
|
#define enable_e3() WRITE(E3_ENABLE_PIN, E_ENABLE_ON)
|
||||||
|
#define disable_e3() WRITE(E3_ENABLE_PIN,!E_ENABLE_ON)
|
||||||
|
#else
|
||||||
|
#define enable_e3() /* nothing */
|
||||||
|
#define disable_e3() /* nothing */
|
||||||
|
#endif
|
||||||
|
|
||||||
enum AxisEnum {X_AXIS=0, Y_AXIS=1, Z_AXIS=2, E_AXIS=3, X_HEAD=4, Y_HEAD=5};
|
enum AxisEnum {X_AXIS=0, Y_AXIS=1, Z_AXIS=2, E_AXIS=3, X_HEAD=4, Y_HEAD=5};
|
||||||
|
|
||||||
|
|
|
@ -212,6 +212,9 @@ int extruder_multiply[EXTRUDERS] = {100
|
||||||
, 100
|
, 100
|
||||||
#if EXTRUDERS > 2
|
#if EXTRUDERS > 2
|
||||||
, 100
|
, 100
|
||||||
|
#if EXTRUDERS > 3
|
||||||
|
, 100
|
||||||
|
#endif
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
};
|
};
|
||||||
|
@ -221,6 +224,9 @@ float filament_size[EXTRUDERS] = { DEFAULT_NOMINAL_FILAMENT_DIA
|
||||||
, DEFAULT_NOMINAL_FILAMENT_DIA
|
, DEFAULT_NOMINAL_FILAMENT_DIA
|
||||||
#if EXTRUDERS > 2
|
#if EXTRUDERS > 2
|
||||||
, DEFAULT_NOMINAL_FILAMENT_DIA
|
, DEFAULT_NOMINAL_FILAMENT_DIA
|
||||||
|
#if EXTRUDERS > 3
|
||||||
|
, DEFAULT_NOMINAL_FILAMENT_DIA
|
||||||
|
#endif
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
};
|
};
|
||||||
|
@ -229,6 +235,9 @@ float volumetric_multiplier[EXTRUDERS] = {1.0
|
||||||
, 1.0
|
, 1.0
|
||||||
#if EXTRUDERS > 2
|
#if EXTRUDERS > 2
|
||||||
, 1.0
|
, 1.0
|
||||||
|
#if EXTRUDERS > 3
|
||||||
|
, 1.0
|
||||||
|
#endif
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
};
|
};
|
||||||
|
@ -271,19 +280,25 @@ int EtoPPressure=0;
|
||||||
bool autoretract_enabled=false;
|
bool autoretract_enabled=false;
|
||||||
bool retracted[EXTRUDERS]={false
|
bool retracted[EXTRUDERS]={false
|
||||||
#if EXTRUDERS > 1
|
#if EXTRUDERS > 1
|
||||||
, false
|
|
||||||
#if EXTRUDERS > 2
|
|
||||||
, false
|
, false
|
||||||
#endif
|
#if EXTRUDERS > 2
|
||||||
#endif
|
, false
|
||||||
|
#if EXTRUDERS > 3
|
||||||
|
, false
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
};
|
};
|
||||||
bool retracted_swap[EXTRUDERS]={false
|
bool retracted_swap[EXTRUDERS]={false
|
||||||
#if EXTRUDERS > 1
|
#if EXTRUDERS > 1
|
||||||
, false
|
|
||||||
#if EXTRUDERS > 2
|
|
||||||
, false
|
, false
|
||||||
#endif
|
#if EXTRUDERS > 2
|
||||||
#endif
|
, false
|
||||||
|
#if EXTRUDERS > 3
|
||||||
|
, false
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
};
|
};
|
||||||
|
|
||||||
float retract_length = RETRACT_LENGTH;
|
float retract_length = RETRACT_LENGTH;
|
||||||
|
@ -293,7 +308,7 @@ int EtoPPressure=0;
|
||||||
float retract_recover_length = RETRACT_RECOVER_LENGTH;
|
float retract_recover_length = RETRACT_RECOVER_LENGTH;
|
||||||
float retract_recover_length_swap = RETRACT_RECOVER_LENGTH_SWAP;
|
float retract_recover_length_swap = RETRACT_RECOVER_LENGTH_SWAP;
|
||||||
float retract_recover_feedrate = RETRACT_RECOVER_FEEDRATE;
|
float retract_recover_feedrate = RETRACT_RECOVER_FEEDRATE;
|
||||||
#endif
|
#endif // FWRETRACT
|
||||||
|
|
||||||
#ifdef ULTIPANEL
|
#ifdef ULTIPANEL
|
||||||
#ifdef PS_DEFAULT_OFF
|
#ifdef PS_DEFAULT_OFF
|
||||||
|
@ -582,8 +597,8 @@ void setup()
|
||||||
SERIAL_ECHOLNPGM(STRING_CONFIG_H_AUTHOR);
|
SERIAL_ECHOLNPGM(STRING_CONFIG_H_AUTHOR);
|
||||||
SERIAL_ECHOPGM("Compiled: ");
|
SERIAL_ECHOPGM("Compiled: ");
|
||||||
SERIAL_ECHOLNPGM(__DATE__);
|
SERIAL_ECHOLNPGM(__DATE__);
|
||||||
#endif
|
#endif // STRING_CONFIG_H_AUTHOR
|
||||||
#endif
|
#endif // STRING_VERSION_CONFIG_H
|
||||||
SERIAL_ECHO_START;
|
SERIAL_ECHO_START;
|
||||||
SERIAL_ECHOPGM(MSG_FREE_MEMORY);
|
SERIAL_ECHOPGM(MSG_FREE_MEMORY);
|
||||||
SERIAL_ECHO(freeMemory());
|
SERIAL_ECHO(freeMemory());
|
||||||
|
@ -2881,29 +2896,32 @@ Sigma_Exit:
|
||||||
|
|
||||||
float area = .0;
|
float area = .0;
|
||||||
if(code_seen('D')) {
|
if(code_seen('D')) {
|
||||||
float diameter = (float)code_value();
|
float diameter = (float)code_value();
|
||||||
if (diameter == 0.0) {
|
if (diameter == 0.0) {
|
||||||
// setting any extruder filament size disables volumetric on the assumption that
|
// setting any extruder filament size disables volumetric on the assumption that
|
||||||
// slicers either generate in extruder values as cubic mm or as as filament feeds
|
// slicers either generate in extruder values as cubic mm or as as filament feeds
|
||||||
// for all extruders
|
// for all extruders
|
||||||
volumetric_enabled = false;
|
volumetric_enabled = false;
|
||||||
} else {
|
} else {
|
||||||
filament_size[tmp_extruder] = (float)code_value();
|
filament_size[tmp_extruder] = (float)code_value();
|
||||||
// make sure all extruders have some sane value for the filament size
|
// make sure all extruders have some sane value for the filament size
|
||||||
filament_size[0] = (filament_size[0] == 0.0 ? DEFAULT_NOMINAL_FILAMENT_DIA : filament_size[0]);
|
filament_size[0] = (filament_size[0] == 0.0 ? DEFAULT_NOMINAL_FILAMENT_DIA : filament_size[0]);
|
||||||
#if EXTRUDERS > 1
|
#if EXTRUDERS > 1
|
||||||
filament_size[1] = (filament_size[1] == 0.0 ? DEFAULT_NOMINAL_FILAMENT_DIA : filament_size[1]);
|
filament_size[1] = (filament_size[1] == 0.0 ? DEFAULT_NOMINAL_FILAMENT_DIA : filament_size[1]);
|
||||||
#if EXTRUDERS > 2
|
#if EXTRUDERS > 2
|
||||||
filament_size[2] = (filament_size[2] == 0.0 ? DEFAULT_NOMINAL_FILAMENT_DIA : filament_size[2]);
|
filament_size[2] = (filament_size[2] == 0.0 ? DEFAULT_NOMINAL_FILAMENT_DIA : filament_size[2]);
|
||||||
#endif
|
#if EXTRUDERS > 3
|
||||||
#endif
|
filament_size[3] = (filament_size[3] == 0.0 ? DEFAULT_NOMINAL_FILAMENT_DIA : filament_size[3]);
|
||||||
volumetric_enabled = true;
|
#endif //EXTRUDERS > 3
|
||||||
}
|
#endif //EXTRUDERS > 2
|
||||||
|
#endif //EXTRUDERS > 1
|
||||||
|
volumetric_enabled = true;
|
||||||
|
}
|
||||||
} else {
|
} else {
|
||||||
//reserved for setting filament diameter via UFID or filament measuring device
|
//reserved for setting filament diameter via UFID or filament measuring device
|
||||||
break;
|
break;
|
||||||
}
|
}
|
||||||
calculate_volumetric_multipliers();
|
calculate_volumetric_multipliers();
|
||||||
}
|
}
|
||||||
break;
|
break;
|
||||||
case 201: // M201
|
case 201: // M201
|
||||||
|
@ -3020,23 +3038,29 @@ Sigma_Exit:
|
||||||
{
|
{
|
||||||
autoretract_enabled=false;
|
autoretract_enabled=false;
|
||||||
retracted[0]=false;
|
retracted[0]=false;
|
||||||
#if EXTRUDERS > 1
|
#if EXTRUDERS > 1
|
||||||
retracted[1]=false;
|
retracted[1]=false;
|
||||||
#endif
|
#endif
|
||||||
#if EXTRUDERS > 2
|
#if EXTRUDERS > 2
|
||||||
retracted[2]=false;
|
retracted[2]=false;
|
||||||
#endif
|
#endif
|
||||||
|
#if EXTRUDERS > 3
|
||||||
|
retracted[3]=false;
|
||||||
|
#endif
|
||||||
}break;
|
}break;
|
||||||
case 1:
|
case 1:
|
||||||
{
|
{
|
||||||
autoretract_enabled=true;
|
autoretract_enabled=true;
|
||||||
retracted[0]=false;
|
retracted[0]=false;
|
||||||
#if EXTRUDERS > 1
|
#if EXTRUDERS > 1
|
||||||
retracted[1]=false;
|
retracted[1]=false;
|
||||||
#endif
|
#endif
|
||||||
#if EXTRUDERS > 2
|
#if EXTRUDERS > 2
|
||||||
retracted[2]=false;
|
retracted[2]=false;
|
||||||
#endif
|
#endif
|
||||||
|
#if EXTRUDERS > 3
|
||||||
|
retracted[3]=false;
|
||||||
|
#endif
|
||||||
}break;
|
}break;
|
||||||
default:
|
default:
|
||||||
SERIAL_ECHO_START;
|
SERIAL_ECHO_START;
|
||||||
|
@ -4680,7 +4704,10 @@ void calculate_volumetric_multipliers() {
|
||||||
volumetric_multiplier[1] = calculate_volumetric_multiplier(filament_size[1]);
|
volumetric_multiplier[1] = calculate_volumetric_multiplier(filament_size[1]);
|
||||||
#if EXTRUDERS > 2
|
#if EXTRUDERS > 2
|
||||||
volumetric_multiplier[2] = calculate_volumetric_multiplier(filament_size[2]);
|
volumetric_multiplier[2] = calculate_volumetric_multiplier(filament_size[2]);
|
||||||
#endif
|
#if EXTRUDERS > 3
|
||||||
#endif
|
volumetric_multiplier[3] = calculate_volumetric_multiplier(filament_size[3]);
|
||||||
|
#endif //EXTRUDERS > 3
|
||||||
|
#endif //EXTRUDERS > 2
|
||||||
|
#endif //EXTRUDERS > 1
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
|
@ -21,14 +21,16 @@
|
||||||
#define MSG_PREHEAT_PLA0 "Preheat PLA 1"
|
#define MSG_PREHEAT_PLA0 "Preheat PLA 1"
|
||||||
#define MSG_PREHEAT_PLA1 "Preheat PLA 2"
|
#define MSG_PREHEAT_PLA1 "Preheat PLA 2"
|
||||||
#define MSG_PREHEAT_PLA2 "Preheat PLA 3"
|
#define MSG_PREHEAT_PLA2 "Preheat PLA 3"
|
||||||
#define MSG_PREHEAT_PLA012 "Preheat PLA All"
|
#define MSG_PREHEAT_PLA3 "Preheat PLA 4"
|
||||||
|
#define MSG_PREHEAT_PLA0123 "Preheat PLA All"
|
||||||
#define MSG_PREHEAT_PLA_BEDONLY "Preheat PLA Bed"
|
#define MSG_PREHEAT_PLA_BEDONLY "Preheat PLA Bed"
|
||||||
#define MSG_PREHEAT_PLA_SETTINGS "Preheat PLA conf"
|
#define MSG_PREHEAT_PLA_SETTINGS "Preheat PLA conf"
|
||||||
#define MSG_PREHEAT_ABS "Preheat ABS"
|
#define MSG_PREHEAT_ABS "Preheat ABS"
|
||||||
#define MSG_PREHEAT_ABS0 "Preheat ABS 1"
|
#define MSG_PREHEAT_ABS0 "Preheat ABS 1"
|
||||||
#define MSG_PREHEAT_ABS1 "Preheat ABS 2"
|
#define MSG_PREHEAT_ABS1 "Preheat ABS 2"
|
||||||
#define MSG_PREHEAT_ABS2 "Preheat ABS 3"
|
#define MSG_PREHEAT_ABS2 "Preheat ABS 3"
|
||||||
#define MSG_PREHEAT_ABS012 "Preheat ABS All"
|
#define MSG_PREHEAT_ABS3 "Preheat ABS 4"
|
||||||
|
#define MSG_PREHEAT_ABS0123 "Preheat ABS All"
|
||||||
#define MSG_PREHEAT_ABS_BEDONLY "Preheat ABS Bed"
|
#define MSG_PREHEAT_ABS_BEDONLY "Preheat ABS Bed"
|
||||||
#define MSG_PREHEAT_ABS_SETTINGS "Preheat ABS conf"
|
#define MSG_PREHEAT_ABS_SETTINGS "Preheat ABS conf"
|
||||||
#define MSG_COOLDOWN "Cooldown"
|
#define MSG_COOLDOWN "Cooldown"
|
||||||
|
@ -43,6 +45,7 @@
|
||||||
#define MSG_MOVE_E "Extruder"
|
#define MSG_MOVE_E "Extruder"
|
||||||
#define MSG_MOVE_E1 "Extruder2"
|
#define MSG_MOVE_E1 "Extruder2"
|
||||||
#define MSG_MOVE_E2 "Extruder3"
|
#define MSG_MOVE_E2 "Extruder3"
|
||||||
|
#define MSG_MOVE_E3 "Extruder4"
|
||||||
#define MSG_MOVE_01MM "Move 0.1mm"
|
#define MSG_MOVE_01MM "Move 0.1mm"
|
||||||
#define MSG_MOVE_1MM "Move 1mm"
|
#define MSG_MOVE_1MM "Move 1mm"
|
||||||
#define MSG_MOVE_10MM "Move 10mm"
|
#define MSG_MOVE_10MM "Move 10mm"
|
||||||
|
@ -50,12 +53,14 @@
|
||||||
#define MSG_NOZZLE "Nozzle"
|
#define MSG_NOZZLE "Nozzle"
|
||||||
#define MSG_NOZZLE1 "Nozzle2"
|
#define MSG_NOZZLE1 "Nozzle2"
|
||||||
#define MSG_NOZZLE2 "Nozzle3"
|
#define MSG_NOZZLE2 "Nozzle3"
|
||||||
|
#define MSG_NOZZLE3 "Nozzle4"
|
||||||
#define MSG_BED "Bed"
|
#define MSG_BED "Bed"
|
||||||
#define MSG_FAN_SPEED "Fan speed"
|
#define MSG_FAN_SPEED "Fan speed"
|
||||||
#define MSG_FLOW "Flow"
|
#define MSG_FLOW "Flow"
|
||||||
#define MSG_FLOW0 "Flow 0"
|
#define MSG_FLOW0 "Flow 0"
|
||||||
#define MSG_FLOW1 "Flow 1"
|
#define MSG_FLOW1 "Flow 1"
|
||||||
#define MSG_FLOW2 "Flow 2"
|
#define MSG_FLOW2 "Flow 2"
|
||||||
|
#define MSG_FLOW3 "Flow 3"
|
||||||
#define MSG_CONTROL "Control"
|
#define MSG_CONTROL "Control"
|
||||||
#define MSG_MIN " \002 Min"
|
#define MSG_MIN " \002 Min"
|
||||||
#define MSG_MAX " \002 Max"
|
#define MSG_MAX " \002 Max"
|
||||||
|
@ -75,6 +80,10 @@
|
||||||
#define MSG_PID_I2 "PID-I E3"
|
#define MSG_PID_I2 "PID-I E3"
|
||||||
#define MSG_PID_D2 "PID-D E3"
|
#define MSG_PID_D2 "PID-D E3"
|
||||||
#define MSG_PID_C2 "PID-C E3"
|
#define MSG_PID_C2 "PID-C E3"
|
||||||
|
#define MSG_PID_P3 "PID-P E4"
|
||||||
|
#define MSG_PID_I3 "PID-I E4"
|
||||||
|
#define MSG_PID_D3 "PID-D E4"
|
||||||
|
#define MSG_PID_C3 "PID-C E4"
|
||||||
#define MSG_ACC "Accel"
|
#define MSG_ACC "Accel"
|
||||||
#define MSG_VXY_JERK "Vxy-jerk"
|
#define MSG_VXY_JERK "Vxy-jerk"
|
||||||
#define MSG_VZ_JERK "Vz-jerk"
|
#define MSG_VZ_JERK "Vz-jerk"
|
||||||
|
@ -99,6 +108,7 @@
|
||||||
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1"
|
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1"
|
||||||
#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2"
|
#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2"
|
||||||
#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3"
|
#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3"
|
||||||
|
#define MSG_FILAMENT_SIZE_EXTRUDER_3 "Fil. Dia. 4"
|
||||||
#define MSG_CONTRAST "LCD contrast"
|
#define MSG_CONTRAST "LCD contrast"
|
||||||
#define MSG_STORE_EPROM "Store memory"
|
#define MSG_STORE_EPROM "Store memory"
|
||||||
#define MSG_LOAD_EPROM "Load memory"
|
#define MSG_LOAD_EPROM "Load memory"
|
||||||
|
|
|
@ -21,14 +21,16 @@
|
||||||
#define MSG_PREHEAT_PLA0 "Preriscalda PLA 1"
|
#define MSG_PREHEAT_PLA0 "Preriscalda PLA 1"
|
||||||
#define MSG_PREHEAT_PLA1 "Preriscalda PLA 2"
|
#define MSG_PREHEAT_PLA1 "Preriscalda PLA 2"
|
||||||
#define MSG_PREHEAT_PLA2 "Preriscalda PLA 3"
|
#define MSG_PREHEAT_PLA2 "Preriscalda PLA 3"
|
||||||
#define MSG_PREHEAT_PLA012 "Prer. PLA Tutto"
|
#define MSG_PREHEAT_PLA3 "Preriscalda PLA 4"
|
||||||
|
#define MSG_PREHEAT_PLA0123 "Prer. PLA Tutto"
|
||||||
#define MSG_PREHEAT_PLA_BEDONLY "Prer. PLA Piatto"
|
#define MSG_PREHEAT_PLA_BEDONLY "Prer. PLA Piatto"
|
||||||
#define MSG_PREHEAT_PLA_SETTINGS "Config. prer. PLA"
|
#define MSG_PREHEAT_PLA_SETTINGS "Config. prer. PLA"
|
||||||
#define MSG_PREHEAT_ABS "Preriscalda ABS"
|
#define MSG_PREHEAT_ABS "Preriscalda ABS"
|
||||||
#define MSG_PREHEAT_ABS0 "Preriscalda ABS 1"
|
#define MSG_PREHEAT_ABS0 "Preriscalda ABS 1"
|
||||||
#define MSG_PREHEAT_ABS1 "Preriscalda ABS 2"
|
#define MSG_PREHEAT_ABS1 "Preriscalda ABS 2"
|
||||||
#define MSG_PREHEAT_ABS2 "Preriscalda ABS 3"
|
#define MSG_PREHEAT_ABS2 "Preriscalda ABS 3"
|
||||||
#define MSG_PREHEAT_ABS012 "Prer. ABS Tutto"
|
#define MSG_PREHEAT_ABS3 "Preriscalda ABS 4"
|
||||||
|
#define MSG_PREHEAT_ABS0123 "Prer. ABS Tutto"
|
||||||
#define MSG_PREHEAT_ABS_BEDONLY "Prer. ABS Piatto"
|
#define MSG_PREHEAT_ABS_BEDONLY "Prer. ABS Piatto"
|
||||||
#define MSG_PREHEAT_ABS_SETTINGS "Config. prer. ABS"
|
#define MSG_PREHEAT_ABS_SETTINGS "Config. prer. ABS"
|
||||||
#define MSG_COOLDOWN "Raffredda"
|
#define MSG_COOLDOWN "Raffredda"
|
||||||
|
@ -43,6 +45,7 @@
|
||||||
#define MSG_MOVE_E "Estrusore"
|
#define MSG_MOVE_E "Estrusore"
|
||||||
#define MSG_MOVE_E1 "Estrusore 2"
|
#define MSG_MOVE_E1 "Estrusore 2"
|
||||||
#define MSG_MOVE_E2 "Estrusore 3"
|
#define MSG_MOVE_E2 "Estrusore 3"
|
||||||
|
#define MSG_MOVE_E3 "Estrusore 4"
|
||||||
#define MSG_MOVE_01MM "Muovi di 0.1mm"
|
#define MSG_MOVE_01MM "Muovi di 0.1mm"
|
||||||
#define MSG_MOVE_1MM "Muovi di 1mm"
|
#define MSG_MOVE_1MM "Muovi di 1mm"
|
||||||
#define MSG_MOVE_10MM "Muovi di 10mm"
|
#define MSG_MOVE_10MM "Muovi di 10mm"
|
||||||
|
@ -50,12 +53,14 @@
|
||||||
#define MSG_NOZZLE "Ugello"
|
#define MSG_NOZZLE "Ugello"
|
||||||
#define MSG_NOZZLE1 "Ugello2"
|
#define MSG_NOZZLE1 "Ugello2"
|
||||||
#define MSG_NOZZLE2 "Ugello3"
|
#define MSG_NOZZLE2 "Ugello3"
|
||||||
|
#define MSG_NOZZLE3 "Ugello4"
|
||||||
#define MSG_BED "Piatto"
|
#define MSG_BED "Piatto"
|
||||||
#define MSG_FAN_SPEED "Ventola"
|
#define MSG_FAN_SPEED "Ventola"
|
||||||
#define MSG_FLOW "Flusso"
|
#define MSG_FLOW "Flusso"
|
||||||
#define MSG_FLOW0 "Flusso 0"
|
#define MSG_FLOW0 "Flusso 0"
|
||||||
#define MSG_FLOW1 "Flusso 1"
|
#define MSG_FLOW1 "Flusso 1"
|
||||||
#define MSG_FLOW2 "Flusso 2"
|
#define MSG_FLOW2 "Flusso 2"
|
||||||
|
#define MSG_FLOW3 "Flusso 3"
|
||||||
#define MSG_CONTROL "Controllo"
|
#define MSG_CONTROL "Controllo"
|
||||||
#define MSG_MIN " \002 Min:"
|
#define MSG_MIN " \002 Min:"
|
||||||
#define MSG_MAX " \002 Max:"
|
#define MSG_MAX " \002 Max:"
|
||||||
|
@ -75,6 +80,10 @@
|
||||||
#define MSG_PID_I2 "PID-I E3"
|
#define MSG_PID_I2 "PID-I E3"
|
||||||
#define MSG_PID_D2 "PID-D E3"
|
#define MSG_PID_D2 "PID-D E3"
|
||||||
#define MSG_PID_C2 "PID-C E3"
|
#define MSG_PID_C2 "PID-C E3"
|
||||||
|
#define MSG_PID_P3 "PID-P E4"
|
||||||
|
#define MSG_PID_I3 "PID-I E4"
|
||||||
|
#define MSG_PID_D3 "PID-D E4"
|
||||||
|
#define MSG_PID_C3 "PID-C E4"
|
||||||
#define MSG_ACC "Accel."
|
#define MSG_ACC "Accel."
|
||||||
#define MSG_VXY_JERK "Vxy-jerk"
|
#define MSG_VXY_JERK "Vxy-jerk"
|
||||||
#define MSG_VZ_JERK "Vz-jerk"
|
#define MSG_VZ_JERK "Vz-jerk"
|
||||||
|
@ -95,10 +104,11 @@
|
||||||
#define MSG_TEMPERATURE "Temperatura"
|
#define MSG_TEMPERATURE "Temperatura"
|
||||||
#define MSG_MOTION "Movimento"
|
#define MSG_MOTION "Movimento"
|
||||||
#define MSG_VOLUMETRIC "Filament"
|
#define MSG_VOLUMETRIC "Filament"
|
||||||
#define MSG_VOLUMETRIC_ENABLED "E in mm³"
|
#define MSG_VOLUMETRIC_ENABLED "E in mm³"
|
||||||
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Diam. filo 1"
|
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Diam. filo 1"
|
||||||
#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Diam. filo 2"
|
#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Diam. filo 2"
|
||||||
#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Diam. filo 3"
|
#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Diam. filo 3"
|
||||||
|
#define MSG_FILAMENT_SIZE_EXTRUDER_3 "Diam. filo 4"
|
||||||
#define MSG_CONTRAST "Contrasto LCD"
|
#define MSG_CONTRAST "Contrasto LCD"
|
||||||
#define MSG_STORE_EPROM "Salva in EEPROM"
|
#define MSG_STORE_EPROM "Salva in EEPROM"
|
||||||
#define MSG_LOAD_EPROM "Carica da EEPROM"
|
#define MSG_LOAD_EPROM "Carica da EEPROM"
|
||||||
|
|
|
@ -2933,6 +2933,12 @@ Fan_2 2
|
||||||
#endif // CHEAPTRONIC
|
#endif // CHEAPTRONIC
|
||||||
|
|
||||||
|
|
||||||
|
#ifndef HEATER_3_PIN
|
||||||
|
#define HEATER_3_PIN -1
|
||||||
|
#endif
|
||||||
|
#ifndef TEMP_3_PIN
|
||||||
|
#define TEMP_3_PIN -1
|
||||||
|
#endif
|
||||||
|
|
||||||
#ifndef KNOWN_BOARD
|
#ifndef KNOWN_BOARD
|
||||||
#error Unknown MOTHERBOARD value in configuration.h
|
#error Unknown MOTHERBOARD value in configuration.h
|
||||||
|
@ -2950,6 +2956,11 @@ Fan_2 2
|
||||||
#else
|
#else
|
||||||
#define _E2_PINS
|
#define _E2_PINS
|
||||||
#endif
|
#endif
|
||||||
|
#if EXTRUDERS > 3
|
||||||
|
#define _E3_PINS E3_STEP_PIN, E3_DIR_PIN, E3_ENABLE_PIN, HEATER_3_PIN,
|
||||||
|
#else
|
||||||
|
#define _E3_PINS
|
||||||
|
#endif
|
||||||
|
|
||||||
#ifdef X_STOP_PIN
|
#ifdef X_STOP_PIN
|
||||||
#if X_HOME_DIR < 0
|
#if X_HOME_DIR < 0
|
||||||
|
@ -2995,7 +3006,6 @@ Fan_2 2
|
||||||
|
|
||||||
#define SENSITIVE_PINS {0, 1, X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, PS_ON_PIN, \
|
#define SENSITIVE_PINS {0, 1, X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, PS_ON_PIN, \
|
||||||
HEATER_BED_PIN, FAN_PIN, \
|
HEATER_BED_PIN, FAN_PIN, \
|
||||||
_E0_PINS _E1_PINS _E2_PINS \
|
_E0_PINS _E1_PINS _E2_PINS _E3_PINS \
|
||||||
analogInputToDigitalPin(TEMP_0_PIN), analogInputToDigitalPin(TEMP_1_PIN), analogInputToDigitalPin(TEMP_2_PIN), analogInputToDigitalPin(TEMP_BED_PIN) }
|
analogInputToDigitalPin(TEMP_0_PIN), analogInputToDigitalPin(TEMP_1_PIN), analogInputToDigitalPin(TEMP_2_PIN), analogInputToDigitalPin(TEMP_3_PIN), analogInputToDigitalPin(TEMP_BED_PIN) }
|
||||||
|
|
||||||
#endif //__PINS_H
|
#endif //__PINS_H
|
||||||
|
|
|
@ -80,7 +80,7 @@ unsigned long axis_steps_per_sqr_second[NUM_AXIS];
|
||||||
matrix_3x3 plan_bed_level_matrix = {
|
matrix_3x3 plan_bed_level_matrix = {
|
||||||
1.0, 0.0, 0.0,
|
1.0, 0.0, 0.0,
|
||||||
0.0, 1.0, 0.0,
|
0.0, 1.0, 0.0,
|
||||||
0.0, 0.0, 1.0,
|
0.0, 0.0, 1.0
|
||||||
};
|
};
|
||||||
#endif // #ifdef ENABLE_AUTO_BED_LEVELING
|
#endif // #ifdef ENABLE_AUTO_BED_LEVELING
|
||||||
|
|
||||||
|
@ -96,7 +96,7 @@ float autotemp_factor=0.1;
|
||||||
bool autotemp_enabled=false;
|
bool autotemp_enabled=false;
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
unsigned char g_uc_extruder_last_move[3] = {0,0,0};
|
unsigned char g_uc_extruder_last_move[4] = {0,0,0,0};
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//=================semi-private variables, used in inline functions =====
|
//=================semi-private variables, used in inline functions =====
|
||||||
|
@ -486,6 +486,7 @@ void check_axes_activity()
|
||||||
disable_e0();
|
disable_e0();
|
||||||
disable_e1();
|
disable_e1();
|
||||||
disable_e2();
|
disable_e2();
|
||||||
|
disable_e3();
|
||||||
}
|
}
|
||||||
#if defined(FAN_PIN) && FAN_PIN > -1
|
#if defined(FAN_PIN) && FAN_PIN > -1
|
||||||
#ifdef FAN_KICKSTART_TIME
|
#ifdef FAN_KICKSTART_TIME
|
||||||
|
@ -672,6 +673,7 @@ block->steps_y = labs((target[X_AXIS]-position[X_AXIS]) - (target[Y_AXIS]-positi
|
||||||
if(g_uc_extruder_last_move[0] > 0) g_uc_extruder_last_move[0]--;
|
if(g_uc_extruder_last_move[0] > 0) g_uc_extruder_last_move[0]--;
|
||||||
if(g_uc_extruder_last_move[1] > 0) g_uc_extruder_last_move[1]--;
|
if(g_uc_extruder_last_move[1] > 0) g_uc_extruder_last_move[1]--;
|
||||||
if(g_uc_extruder_last_move[2] > 0) g_uc_extruder_last_move[2]--;
|
if(g_uc_extruder_last_move[2] > 0) g_uc_extruder_last_move[2]--;
|
||||||
|
if(g_uc_extruder_last_move[3] > 0) g_uc_extruder_last_move[3]--;
|
||||||
|
|
||||||
switch(extruder)
|
switch(extruder)
|
||||||
{
|
{
|
||||||
|
@ -681,6 +683,7 @@ block->steps_y = labs((target[X_AXIS]-position[X_AXIS]) - (target[Y_AXIS]-positi
|
||||||
|
|
||||||
if(g_uc_extruder_last_move[1] == 0) disable_e1();
|
if(g_uc_extruder_last_move[1] == 0) disable_e1();
|
||||||
if(g_uc_extruder_last_move[2] == 0) disable_e2();
|
if(g_uc_extruder_last_move[2] == 0) disable_e2();
|
||||||
|
if(g_uc_extruder_last_move[3] == 0) disable_e3();
|
||||||
break;
|
break;
|
||||||
case 1:
|
case 1:
|
||||||
enable_e1();
|
enable_e1();
|
||||||
|
@ -688,6 +691,7 @@ block->steps_y = labs((target[X_AXIS]-position[X_AXIS]) - (target[Y_AXIS]-positi
|
||||||
|
|
||||||
if(g_uc_extruder_last_move[0] == 0) disable_e0();
|
if(g_uc_extruder_last_move[0] == 0) disable_e0();
|
||||||
if(g_uc_extruder_last_move[2] == 0) disable_e2();
|
if(g_uc_extruder_last_move[2] == 0) disable_e2();
|
||||||
|
if(g_uc_extruder_last_move[3] == 0) disable_e3();
|
||||||
break;
|
break;
|
||||||
case 2:
|
case 2:
|
||||||
enable_e2();
|
enable_e2();
|
||||||
|
@ -695,6 +699,15 @@ block->steps_y = labs((target[X_AXIS]-position[X_AXIS]) - (target[Y_AXIS]-positi
|
||||||
|
|
||||||
if(g_uc_extruder_last_move[0] == 0) disable_e0();
|
if(g_uc_extruder_last_move[0] == 0) disable_e0();
|
||||||
if(g_uc_extruder_last_move[1] == 0) disable_e1();
|
if(g_uc_extruder_last_move[1] == 0) disable_e1();
|
||||||
|
if(g_uc_extruder_last_move[3] == 0) disable_e3();
|
||||||
|
break;
|
||||||
|
case 3:
|
||||||
|
enable_e3();
|
||||||
|
g_uc_extruder_last_move[3] = BLOCK_BUFFER_SIZE*2;
|
||||||
|
|
||||||
|
if(g_uc_extruder_last_move[0] == 0) disable_e0();
|
||||||
|
if(g_uc_extruder_last_move[1] == 0) disable_e1();
|
||||||
|
if(g_uc_extruder_last_move[2] == 0) disable_e2();
|
||||||
break;
|
break;
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
@ -703,6 +716,7 @@ block->steps_y = labs((target[X_AXIS]-position[X_AXIS]) - (target[Y_AXIS]-positi
|
||||||
enable_e0();
|
enable_e0();
|
||||||
enable_e1();
|
enable_e1();
|
||||||
enable_e2();
|
enable_e2();
|
||||||
|
enable_e3();
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
|
@ -866,7 +880,7 @@ Having the real displacement of the head, we can calculate the total movement le
|
||||||
long min_xy_segment_time =min(max_x_segment_time, max_y_segment_time);
|
long min_xy_segment_time =min(max_x_segment_time, max_y_segment_time);
|
||||||
if(min_xy_segment_time < MAX_FREQ_TIME)
|
if(min_xy_segment_time < MAX_FREQ_TIME)
|
||||||
speed_factor = min(speed_factor, speed_factor * (float)min_xy_segment_time / (float)MAX_FREQ_TIME);
|
speed_factor = min(speed_factor, speed_factor * (float)min_xy_segment_time / (float)MAX_FREQ_TIME);
|
||||||
#endif
|
#endif // XY_FREQUENCY_LIMIT
|
||||||
|
|
||||||
// Correct the speed
|
// Correct the speed
|
||||||
if( speed_factor < 1.0)
|
if( speed_factor < 1.0)
|
||||||
|
|
|
@ -55,7 +55,7 @@ volatile static unsigned long step_events_completed; // The number of step event
|
||||||
#ifdef ADVANCE
|
#ifdef ADVANCE
|
||||||
static long advance_rate, advance, final_advance = 0;
|
static long advance_rate, advance, final_advance = 0;
|
||||||
static long old_advance = 0;
|
static long old_advance = 0;
|
||||||
static long e_steps[3];
|
static long e_steps[4];
|
||||||
#endif
|
#endif
|
||||||
static long acceleration_time, deceleration_time;
|
static long acceleration_time, deceleration_time;
|
||||||
//static unsigned long accelerate_until, decelerate_after, acceleration_rate, initial_rate, final_rate, nominal_rate;
|
//static unsigned long accelerate_until, decelerate_after, acceleration_rate, initial_rate, final_rate, nominal_rate;
|
||||||
|
@ -200,6 +200,8 @@ void checkHitEndstops()
|
||||||
setTargetHotend0(0);
|
setTargetHotend0(0);
|
||||||
setTargetHotend1(0);
|
setTargetHotend1(0);
|
||||||
setTargetHotend2(0);
|
setTargetHotend2(0);
|
||||||
|
setTargetHotend3(0);
|
||||||
|
setTargetBed(0);
|
||||||
}
|
}
|
||||||
#endif
|
#endif
|
||||||
}
|
}
|
||||||
|
@ -298,7 +300,7 @@ FORCE_INLINE void trapezoid_generator_reset() {
|
||||||
// SERIAL_ECHOPGM("advance rate :");
|
// SERIAL_ECHOPGM("advance rate :");
|
||||||
// SERIAL_ECHO(current_block->advance_rate/256.0);
|
// SERIAL_ECHO(current_block->advance_rate/256.0);
|
||||||
// SERIAL_ECHOPGM("initial advance :");
|
// SERIAL_ECHOPGM("initial advance :");
|
||||||
// SERIAL_ECHO(current_block->initial_advance/256.0);
|
// SERIAL_ECHO(current_block->initial_advance/256.0);
|
||||||
// SERIAL_ECHOPGM("final advance :");
|
// SERIAL_ECHOPGM("final advance :");
|
||||||
// SERIAL_ECHOLN(current_block->final_advance/256.0);
|
// SERIAL_ECHOLN(current_block->final_advance/256.0);
|
||||||
|
|
||||||
|
@ -552,8 +554,8 @@ ISR(TIMER1_COMPA_vect)
|
||||||
}
|
}
|
||||||
#endif //ADVANCE
|
#endif //ADVANCE
|
||||||
|
|
||||||
counter_x += current_block->steps_x;
|
counter_x += current_block->steps_x;
|
||||||
#ifdef CONFIG_STEPPERS_TOSHIBA
|
#ifdef CONFIG_STEPPERS_TOSHIBA
|
||||||
/* The toshiba stepper controller require much longer pulses
|
/* The toshiba stepper controller require much longer pulses
|
||||||
* tjerfore we 'stage' decompose the pulses between high, and
|
* tjerfore we 'stage' decompose the pulses between high, and
|
||||||
* low instead of doing each in turn. The extra tests add enough
|
* low instead of doing each in turn. The extra tests add enough
|
||||||
|
@ -681,7 +683,7 @@ ISR(TIMER1_COMPA_vect)
|
||||||
WRITE_E_STEP(INVERT_E_STEP_PIN);
|
WRITE_E_STEP(INVERT_E_STEP_PIN);
|
||||||
}
|
}
|
||||||
#endif //!ADVANCE
|
#endif //!ADVANCE
|
||||||
#endif
|
#endif // CONFIG_STEPPERS_TOSHIBA
|
||||||
step_events_completed += 1;
|
step_events_completed += 1;
|
||||||
if(step_events_completed >= current_block->step_event_count) break;
|
if(step_events_completed >= current_block->step_event_count) break;
|
||||||
}
|
}
|
||||||
|
@ -807,6 +809,22 @@ ISR(TIMER1_COMPA_vect)
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
#endif
|
#endif
|
||||||
|
#if EXTRUDERS > 3
|
||||||
|
if (e_steps[3] != 0) {
|
||||||
|
WRITE(E3_STEP_PIN, INVERT_E_STEP_PIN);
|
||||||
|
if (e_steps[3] < 0) {
|
||||||
|
WRITE(E3_DIR_PIN, INVERT_E3_DIR);
|
||||||
|
e_steps[3]++;
|
||||||
|
WRITE(E3_STEP_PIN, !INVERT_E_STEP_PIN);
|
||||||
|
}
|
||||||
|
else if (e_steps[3] > 0) {
|
||||||
|
WRITE(E3_DIR_PIN, !INVERT_E3_DIR);
|
||||||
|
e_steps[3]--;
|
||||||
|
WRITE(E3_STEP_PIN, !INVERT_E_STEP_PIN);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
#endif // ADVANCE
|
#endif // ADVANCE
|
||||||
|
@ -846,6 +864,9 @@ void st_init()
|
||||||
#if defined(E2_DIR_PIN) && (E2_DIR_PIN > -1)
|
#if defined(E2_DIR_PIN) && (E2_DIR_PIN > -1)
|
||||||
SET_OUTPUT(E2_DIR_PIN);
|
SET_OUTPUT(E2_DIR_PIN);
|
||||||
#endif
|
#endif
|
||||||
|
#if defined(E3_DIR_PIN) && (E3_DIR_PIN > -1)
|
||||||
|
SET_OUTPUT(E3_DIR_PIN);
|
||||||
|
#endif
|
||||||
|
|
||||||
//Initialize Enable Pins - steppers default to disabled.
|
//Initialize Enable Pins - steppers default to disabled.
|
||||||
|
|
||||||
|
@ -887,6 +908,10 @@ void st_init()
|
||||||
SET_OUTPUT(E2_ENABLE_PIN);
|
SET_OUTPUT(E2_ENABLE_PIN);
|
||||||
if(!E_ENABLE_ON) WRITE(E2_ENABLE_PIN,HIGH);
|
if(!E_ENABLE_ON) WRITE(E2_ENABLE_PIN,HIGH);
|
||||||
#endif
|
#endif
|
||||||
|
#if defined(E3_ENABLE_PIN) && (E3_ENABLE_PIN > -1)
|
||||||
|
SET_OUTPUT(E3_ENABLE_PIN);
|
||||||
|
if(!E_ENABLE_ON) WRITE(E3_ENABLE_PIN,HIGH);
|
||||||
|
#endif
|
||||||
|
|
||||||
//endstops and pullups
|
//endstops and pullups
|
||||||
|
|
||||||
|
@ -977,6 +1002,11 @@ void st_init()
|
||||||
WRITE(E2_STEP_PIN,INVERT_E_STEP_PIN);
|
WRITE(E2_STEP_PIN,INVERT_E_STEP_PIN);
|
||||||
disable_e2();
|
disable_e2();
|
||||||
#endif
|
#endif
|
||||||
|
#if defined(E3_STEP_PIN) && (E3_STEP_PIN > -1)
|
||||||
|
SET_OUTPUT(E3_STEP_PIN);
|
||||||
|
WRITE(E3_STEP_PIN,INVERT_E_STEP_PIN);
|
||||||
|
disable_e3();
|
||||||
|
#endif
|
||||||
|
|
||||||
// waveform generation = 0100 = CTC
|
// waveform generation = 0100 = CTC
|
||||||
TCCR1B &= ~(1<<WGM13);
|
TCCR1B &= ~(1<<WGM13);
|
||||||
|
@ -1007,6 +1037,7 @@ void st_init()
|
||||||
e_steps[0] = 0;
|
e_steps[0] = 0;
|
||||||
e_steps[1] = 0;
|
e_steps[1] = 0;
|
||||||
e_steps[2] = 0;
|
e_steps[2] = 0;
|
||||||
|
e_steps[3] = 0;
|
||||||
TIMSK0 |= (1<<OCIE0A);
|
TIMSK0 |= (1<<OCIE0A);
|
||||||
#endif //ADVANCE
|
#endif //ADVANCE
|
||||||
|
|
||||||
|
@ -1068,6 +1099,7 @@ void finishAndDisableSteppers()
|
||||||
disable_e0();
|
disable_e0();
|
||||||
disable_e1();
|
disable_e1();
|
||||||
disable_e2();
|
disable_e2();
|
||||||
|
disable_e3();
|
||||||
}
|
}
|
||||||
|
|
||||||
void quickStop()
|
void quickStop()
|
||||||
|
|
|
@ -23,7 +23,11 @@
|
||||||
|
|
||||||
#include "planner.h"
|
#include "planner.h"
|
||||||
|
|
||||||
#if EXTRUDERS > 2
|
#if EXTRUDERS > 3
|
||||||
|
#define WRITE_E_STEP(v) { if(current_block->active_extruder == 3) { WRITE(E3_STEP_PIN, v); } else { if(current_block->active_extruder == 2) { WRITE(E2_STEP_PIN, v); } else { if(current_block->active_extruder == 1) { WRITE(E1_STEP_PIN, v); } else { WRITE(E0_STEP_PIN, v); }}}}
|
||||||
|
#define NORM_E_DIR() { if(current_block->active_extruder == 3) { WRITE(E3_DIR_PIN, !INVERT_E3_DIR); } else { if(current_block->active_extruder == 2) { WRITE(E2_DIR_PIN, !INVERT_E2_DIR); } else { if(current_block->active_extruder == 1) { WRITE(E1_DIR_PIN, !INVERT_E1_DIR); } else { WRITE(E0_DIR_PIN, !INVERT_E0_DIR); }}}}
|
||||||
|
#define REV_E_DIR() { if(current_block->active_extruder == 3) { WRITE(E3_DIR_PIN, INVERT_E3_DIR); } else { if(current_block->active_extruder == 2) { WRITE(E2_DIR_PIN, INVERT_E2_DIR); } else { if(current_block->active_extruder == 1) { WRITE(E1_DIR_PIN, INVERT_E1_DIR); } else { WRITE(E0_DIR_PIN, INVERT_E0_DIR); }}}}
|
||||||
|
#elif EXTRUDERS > 2
|
||||||
#define WRITE_E_STEP(v) { if(current_block->active_extruder == 2) { WRITE(E2_STEP_PIN, v); } else { if(current_block->active_extruder == 1) { WRITE(E1_STEP_PIN, v); } else { WRITE(E0_STEP_PIN, v); }}}
|
#define WRITE_E_STEP(v) { if(current_block->active_extruder == 2) { WRITE(E2_STEP_PIN, v); } else { if(current_block->active_extruder == 1) { WRITE(E1_STEP_PIN, v); } else { WRITE(E0_STEP_PIN, v); }}}
|
||||||
#define NORM_E_DIR() { if(current_block->active_extruder == 2) { WRITE(E2_DIR_PIN, !INVERT_E2_DIR); } else { if(current_block->active_extruder == 1) { WRITE(E1_DIR_PIN, !INVERT_E1_DIR); } else { WRITE(E0_DIR_PIN, !INVERT_E0_DIR); }}}
|
#define NORM_E_DIR() { if(current_block->active_extruder == 2) { WRITE(E2_DIR_PIN, !INVERT_E2_DIR); } else { if(current_block->active_extruder == 1) { WRITE(E1_DIR_PIN, !INVERT_E1_DIR); } else { WRITE(E0_DIR_PIN, !INVERT_E0_DIR); }}}
|
||||||
#define REV_E_DIR() { if(current_block->active_extruder == 2) { WRITE(E2_DIR_PIN, INVERT_E2_DIR); } else { if(current_block->active_extruder == 1) { WRITE(E1_DIR_PIN, INVERT_E1_DIR); } else { WRITE(E0_DIR_PIN, INVERT_E0_DIR); }}}
|
#define REV_E_DIR() { if(current_block->active_extruder == 2) { WRITE(E2_DIR_PIN, INVERT_E2_DIR); } else { if(current_block->active_extruder == 1) { WRITE(E1_DIR_PIN, INVERT_E1_DIR); } else { WRITE(E0_DIR_PIN, INVERT_E0_DIR); }}}
|
||||||
|
|
|
@ -115,14 +115,16 @@ static volatile bool temp_meas_ready = false;
|
||||||
static unsigned long extruder_autofan_last_check;
|
static unsigned long extruder_autofan_last_check;
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#if EXTRUDERS > 3
|
#if EXTRUDERS > 4
|
||||||
# error Unsupported number of extruders
|
# error Unsupported number of extruders
|
||||||
|
#elif EXTRUDERS > 3
|
||||||
|
# define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1, v2, v3, v4 }
|
||||||
#elif EXTRUDERS > 2
|
#elif EXTRUDERS > 2
|
||||||
# define ARRAY_BY_EXTRUDERS(v1, v2, v3) { v1, v2, v3 }
|
# define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1, v2, v3 }
|
||||||
#elif EXTRUDERS > 1
|
#elif EXTRUDERS > 1
|
||||||
# define ARRAY_BY_EXTRUDERS(v1, v2, v3) { v1, v2 }
|
# define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1, v2 }
|
||||||
#else
|
#else
|
||||||
# define ARRAY_BY_EXTRUDERS(v1, v2, v3) { v1 }
|
# define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1 }
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#ifdef PIDTEMP
|
#ifdef PIDTEMP
|
||||||
|
@ -144,10 +146,10 @@ static volatile bool temp_meas_ready = false;
|
||||||
#endif //PIDTEMP
|
#endif //PIDTEMP
|
||||||
|
|
||||||
// Init min and max temp with extreme values to prevent false errors during startup
|
// Init min and max temp with extreme values to prevent false errors during startup
|
||||||
static int minttemp_raw[EXTRUDERS] = ARRAY_BY_EXTRUDERS( HEATER_0_RAW_LO_TEMP , HEATER_1_RAW_LO_TEMP , HEATER_2_RAW_LO_TEMP );
|
static int minttemp_raw[EXTRUDERS] = ARRAY_BY_EXTRUDERS( HEATER_0_RAW_LO_TEMP , HEATER_1_RAW_LO_TEMP , HEATER_2_RAW_LO_TEMP, HEATER_3_RAW_LO_TEMP);
|
||||||
static int maxttemp_raw[EXTRUDERS] = ARRAY_BY_EXTRUDERS( HEATER_0_RAW_HI_TEMP , HEATER_1_RAW_HI_TEMP , HEATER_2_RAW_HI_TEMP );
|
static int maxttemp_raw[EXTRUDERS] = ARRAY_BY_EXTRUDERS( HEATER_0_RAW_HI_TEMP , HEATER_1_RAW_HI_TEMP , HEATER_2_RAW_HI_TEMP, HEATER_3_RAW_HI_TEMP);
|
||||||
static int minttemp[EXTRUDERS] = ARRAY_BY_EXTRUDERS( 0, 0, 0 );
|
static int minttemp[EXTRUDERS] = ARRAY_BY_EXTRUDERS( 0, 0, 0, 0 );
|
||||||
static int maxttemp[EXTRUDERS] = ARRAY_BY_EXTRUDERS( 16383, 16383, 16383 );
|
static int maxttemp[EXTRUDERS] = ARRAY_BY_EXTRUDERS( 16383, 16383, 16383, 16383 );
|
||||||
//static int bed_minttemp_raw = HEATER_BED_RAW_LO_TEMP; /* No bed mintemp error implemented?!? */
|
//static int bed_minttemp_raw = HEATER_BED_RAW_LO_TEMP; /* No bed mintemp error implemented?!? */
|
||||||
#ifdef BED_MAXTEMP
|
#ifdef BED_MAXTEMP
|
||||||
static int bed_maxttemp_raw = HEATER_BED_RAW_HI_TEMP;
|
static int bed_maxttemp_raw = HEATER_BED_RAW_HI_TEMP;
|
||||||
|
@ -157,8 +159,8 @@ static int bed_maxttemp_raw = HEATER_BED_RAW_HI_TEMP;
|
||||||
static void *heater_ttbl_map[2] = {(void *)HEATER_0_TEMPTABLE, (void *)HEATER_1_TEMPTABLE };
|
static void *heater_ttbl_map[2] = {(void *)HEATER_0_TEMPTABLE, (void *)HEATER_1_TEMPTABLE };
|
||||||
static uint8_t heater_ttbllen_map[2] = { HEATER_0_TEMPTABLE_LEN, HEATER_1_TEMPTABLE_LEN };
|
static uint8_t heater_ttbllen_map[2] = { HEATER_0_TEMPTABLE_LEN, HEATER_1_TEMPTABLE_LEN };
|
||||||
#else
|
#else
|
||||||
static void *heater_ttbl_map[EXTRUDERS] = ARRAY_BY_EXTRUDERS( (void *)HEATER_0_TEMPTABLE, (void *)HEATER_1_TEMPTABLE, (void *)HEATER_2_TEMPTABLE );
|
static void *heater_ttbl_map[EXTRUDERS] = ARRAY_BY_EXTRUDERS( (void *)HEATER_0_TEMPTABLE, (void *)HEATER_1_TEMPTABLE, (void *)HEATER_2_TEMPTABLE, (void *)HEATER_3_TEMPTABLE );
|
||||||
static uint8_t heater_ttbllen_map[EXTRUDERS] = ARRAY_BY_EXTRUDERS( HEATER_0_TEMPTABLE_LEN, HEATER_1_TEMPTABLE_LEN, HEATER_2_TEMPTABLE_LEN );
|
static uint8_t heater_ttbllen_map[EXTRUDERS] = ARRAY_BY_EXTRUDERS( HEATER_0_TEMPTABLE_LEN, HEATER_1_TEMPTABLE_LEN, HEATER_2_TEMPTABLE_LEN, HEATER_3_TEMPTABLE_LEN );
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
static float analog2temp(int raw, uint8_t e);
|
static float analog2temp(int raw, uint8_t e);
|
||||||
|
@ -166,8 +168,8 @@ static float analog2tempBed(int raw);
|
||||||
static void updateTemperaturesFromRawValues();
|
static void updateTemperaturesFromRawValues();
|
||||||
|
|
||||||
#ifdef WATCH_TEMP_PERIOD
|
#ifdef WATCH_TEMP_PERIOD
|
||||||
int watch_start_temp[EXTRUDERS] = ARRAY_BY_EXTRUDERS(0,0,0);
|
int watch_start_temp[EXTRUDERS] = ARRAY_BY_EXTRUDERS(0,0,0,0);
|
||||||
unsigned long watchmillis[EXTRUDERS] = ARRAY_BY_EXTRUDERS(0,0,0);
|
unsigned long watchmillis[EXTRUDERS] = ARRAY_BY_EXTRUDERS(0,0,0,0);
|
||||||
#endif //WATCH_TEMP_PERIOD
|
#endif //WATCH_TEMP_PERIOD
|
||||||
|
|
||||||
#ifndef SOFT_PWM_SCALE
|
#ifndef SOFT_PWM_SCALE
|
||||||
|
@ -200,7 +202,8 @@ void PID_autotune(float temp, int extruder, int ncycles)
|
||||||
|
|
||||||
#if (defined(EXTRUDER_0_AUTO_FAN_PIN) && EXTRUDER_0_AUTO_FAN_PIN > -1) || \
|
#if (defined(EXTRUDER_0_AUTO_FAN_PIN) && EXTRUDER_0_AUTO_FAN_PIN > -1) || \
|
||||||
(defined(EXTRUDER_1_AUTO_FAN_PIN) && EXTRUDER_1_AUTO_FAN_PIN > -1) || \
|
(defined(EXTRUDER_1_AUTO_FAN_PIN) && EXTRUDER_1_AUTO_FAN_PIN > -1) || \
|
||||||
(defined(EXTRUDER_2_AUTO_FAN_PIN) && EXTRUDER_2_AUTO_FAN_PIN > -1)
|
(defined(EXTRUDER_2_AUTO_FAN_PIN) && EXTRUDER_2_AUTO_FAN_PIN > -1) || \
|
||||||
|
(defined(EXTRUDER_3_AUTO_FAN_PIN) && EXTRUDER_3_AUTO_FAN_PIN > -1)
|
||||||
unsigned long extruder_autofan_last_check = millis();
|
unsigned long extruder_autofan_last_check = millis();
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
@ -243,7 +246,8 @@ void PID_autotune(float temp, int extruder, int ncycles)
|
||||||
|
|
||||||
#if (defined(EXTRUDER_0_AUTO_FAN_PIN) && EXTRUDER_0_AUTO_FAN_PIN > -1) || \
|
#if (defined(EXTRUDER_0_AUTO_FAN_PIN) && EXTRUDER_0_AUTO_FAN_PIN > -1) || \
|
||||||
(defined(EXTRUDER_1_AUTO_FAN_PIN) && EXTRUDER_1_AUTO_FAN_PIN > -1) || \
|
(defined(EXTRUDER_1_AUTO_FAN_PIN) && EXTRUDER_1_AUTO_FAN_PIN > -1) || \
|
||||||
(defined(EXTRUDER_2_AUTO_FAN_PIN) && EXTRUDER_2_AUTO_FAN_PIN > -1)
|
(defined(EXTRUDER_2_AUTO_FAN_PIN) && EXTRUDER_2_AUTO_FAN_PIN > -1) || \
|
||||||
|
(defined(EXTRUDER_3_AUTO_FAN_PIN) && EXTRUDER_3_AUTO_FAN_PIN > -1)
|
||||||
if(millis() - extruder_autofan_last_check > 2500) {
|
if(millis() - extruder_autofan_last_check > 2500) {
|
||||||
checkExtruderAutoFans();
|
checkExtruderAutoFans();
|
||||||
extruder_autofan_last_check = millis();
|
extruder_autofan_last_check = millis();
|
||||||
|
@ -420,6 +424,19 @@ void checkExtruderAutoFans()
|
||||||
fanState |= 4;
|
fanState |= 4;
|
||||||
}
|
}
|
||||||
#endif
|
#endif
|
||||||
|
#if defined(EXTRUDER_3_AUTO_FAN_PIN) && EXTRUDER_3_AUTO_FAN_PIN > -1
|
||||||
|
if (current_temperature[3] > EXTRUDER_AUTO_FAN_TEMPERATURE)
|
||||||
|
{
|
||||||
|
if (EXTRUDER_3_AUTO_FAN_PIN == EXTRUDER_0_AUTO_FAN_PIN)
|
||||||
|
fanState |= 1;
|
||||||
|
else if (EXTRUDER_3_AUTO_FAN_PIN == EXTRUDER_1_AUTO_FAN_PIN)
|
||||||
|
fanState |= 2;
|
||||||
|
else if (EXTRUDER_3_AUTO_FAN_PIN == EXTRUDER_2_AUTO_FAN_PIN)
|
||||||
|
fanState |= 4;
|
||||||
|
else
|
||||||
|
fanState |= 8;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
// update extruder auto fan states
|
// update extruder auto fan states
|
||||||
#if defined(EXTRUDER_0_AUTO_FAN_PIN) && EXTRUDER_0_AUTO_FAN_PIN > -1
|
#if defined(EXTRUDER_0_AUTO_FAN_PIN) && EXTRUDER_0_AUTO_FAN_PIN > -1
|
||||||
|
@ -434,6 +451,12 @@ void checkExtruderAutoFans()
|
||||||
&& EXTRUDER_2_AUTO_FAN_PIN != EXTRUDER_1_AUTO_FAN_PIN)
|
&& EXTRUDER_2_AUTO_FAN_PIN != EXTRUDER_1_AUTO_FAN_PIN)
|
||||||
setExtruderAutoFanState(EXTRUDER_2_AUTO_FAN_PIN, (fanState & 4) != 0);
|
setExtruderAutoFanState(EXTRUDER_2_AUTO_FAN_PIN, (fanState & 4) != 0);
|
||||||
#endif
|
#endif
|
||||||
|
#if defined(EXTRUDER_3_AUTO_FAN_PIN) && EXTRUDER_3_AUTO_FAN_PIN > -1
|
||||||
|
if (EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN
|
||||||
|
&& EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_1_AUTO_FAN_PIN)
|
||||||
|
&& EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN)
|
||||||
|
setExtruderAutoFanState(EXTRUDER_3_AUTO_FAN_PIN, (fanState & 8) != 0);
|
||||||
|
#endif
|
||||||
}
|
}
|
||||||
|
|
||||||
#endif // any extruder auto fan pins set
|
#endif // any extruder auto fan pins set
|
||||||
|
@ -592,13 +615,13 @@ void manage_heater()
|
||||||
temp_dState_bed = pid_input;
|
temp_dState_bed = pid_input;
|
||||||
|
|
||||||
pid_output = pTerm_bed + iTerm_bed - dTerm_bed;
|
pid_output = pTerm_bed + iTerm_bed - dTerm_bed;
|
||||||
if (pid_output > MAX_BED_POWER) {
|
if (pid_output > MAX_BED_POWER) {
|
||||||
if (pid_error_bed > 0 ) temp_iState_bed -= pid_error_bed; // conditional un-integration
|
if (pid_error_bed > 0 ) temp_iState_bed -= pid_error_bed; // conditional un-integration
|
||||||
pid_output=MAX_BED_POWER;
|
pid_output=MAX_BED_POWER;
|
||||||
} else if (pid_output < 0){
|
} else if (pid_output < 0){
|
||||||
if (pid_error_bed < 0 ) temp_iState_bed -= pid_error_bed; // conditional un-integration
|
if (pid_error_bed < 0 ) temp_iState_bed -= pid_error_bed; // conditional un-integration
|
||||||
pid_output=0;
|
pid_output=0;
|
||||||
}
|
}
|
||||||
|
|
||||||
#else
|
#else
|
||||||
pid_output = constrain(target_temperature_bed, 0, MAX_BED_POWER);
|
pid_output = constrain(target_temperature_bed, 0, MAX_BED_POWER);
|
||||||
|
@ -837,6 +860,9 @@ void tp_init()
|
||||||
#if defined(HEATER_2_PIN) && (HEATER_2_PIN > -1)
|
#if defined(HEATER_2_PIN) && (HEATER_2_PIN > -1)
|
||||||
SET_OUTPUT(HEATER_2_PIN);
|
SET_OUTPUT(HEATER_2_PIN);
|
||||||
#endif
|
#endif
|
||||||
|
#if defined(HEATER_3_PIN) && (HEATER_3_PIN > -1)
|
||||||
|
SET_OUTPUT(HEATER_3_PIN);
|
||||||
|
#endif
|
||||||
#if defined(HEATER_BED_PIN) && (HEATER_BED_PIN > -1)
|
#if defined(HEATER_BED_PIN) && (HEATER_BED_PIN > -1)
|
||||||
SET_OUTPUT(HEATER_BED_PIN);
|
SET_OUTPUT(HEATER_BED_PIN);
|
||||||
#endif
|
#endif
|
||||||
|
@ -885,16 +911,23 @@ void tp_init()
|
||||||
#endif
|
#endif
|
||||||
#if defined(TEMP_1_PIN) && (TEMP_1_PIN > -1)
|
#if defined(TEMP_1_PIN) && (TEMP_1_PIN > -1)
|
||||||
#if TEMP_1_PIN < 8
|
#if TEMP_1_PIN < 8
|
||||||
DIDR0 |= 1<<TEMP_1_PIN;
|
DIDR0 |= 1<<TEMP_1_PIN;
|
||||||
#else
|
#else
|
||||||
DIDR2 |= 1<<(TEMP_1_PIN - 8);
|
DIDR2 |= 1<<(TEMP_1_PIN - 8);
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
#if defined(TEMP_2_PIN) && (TEMP_2_PIN > -1)
|
#if defined(TEMP_2_PIN) && (TEMP_2_PIN > -1)
|
||||||
#if TEMP_2_PIN < 8
|
#if TEMP_2_PIN < 8
|
||||||
DIDR0 |= 1 << TEMP_2_PIN;
|
DIDR0 |= 1 << TEMP_2_PIN;
|
||||||
#else
|
#else
|
||||||
DIDR2 |= 1<<(TEMP_2_PIN - 8);
|
DIDR2 |= 1<<(TEMP_2_PIN - 8);
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
#if defined(TEMP_3_PIN) && (TEMP_3_PIN > -1)
|
||||||
|
#if TEMP_3_PIN < 8
|
||||||
|
DIDR0 |= 1 << TEMP_3_PIN;
|
||||||
|
#else
|
||||||
|
DIDR2 |= 1<<(TEMP_3_PIN - 8);
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
#if defined(TEMP_BED_PIN) && (TEMP_BED_PIN > -1)
|
#if defined(TEMP_BED_PIN) && (TEMP_BED_PIN > -1)
|
||||||
|
@ -907,13 +940,13 @@ void tp_init()
|
||||||
|
|
||||||
//Added for Filament Sensor
|
//Added for Filament Sensor
|
||||||
#ifdef FILAMENT_SENSOR
|
#ifdef FILAMENT_SENSOR
|
||||||
#if defined(FILWIDTH_PIN) && (FILWIDTH_PIN > -1)
|
#if defined(FILWIDTH_PIN) && (FILWIDTH_PIN > -1)
|
||||||
#if FILWIDTH_PIN < 8
|
#if FILWIDTH_PIN < 8
|
||||||
DIDR0 |= 1<<FILWIDTH_PIN;
|
DIDR0 |= 1<<FILWIDTH_PIN;
|
||||||
#else
|
#else
|
||||||
DIDR2 |= 1<<(FILWIDTH_PIN - 8);
|
DIDR2 |= 1<<(FILWIDTH_PIN - 8);
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Use timer0 for temperature measurement
|
// Use timer0 for temperature measurement
|
||||||
|
@ -987,6 +1020,28 @@ void tp_init()
|
||||||
}
|
}
|
||||||
#endif //MAXTEMP 2
|
#endif //MAXTEMP 2
|
||||||
|
|
||||||
|
#if (EXTRUDERS > 3) && defined(HEATER_3_MINTEMP)
|
||||||
|
minttemp[3] = HEATER_3_MINTEMP;
|
||||||
|
while(analog2temp(minttemp_raw[3], 3) < HEATER_3_MINTEMP) {
|
||||||
|
#if HEATER_3_RAW_LO_TEMP < HEATER_3_RAW_HI_TEMP
|
||||||
|
minttemp_raw[3] += OVERSAMPLENR;
|
||||||
|
#else
|
||||||
|
minttemp_raw[3] -= OVERSAMPLENR;
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
#endif //MINTEMP 3
|
||||||
|
#if (EXTRUDERS > 3) && defined(HEATER_3_MAXTEMP)
|
||||||
|
maxttemp[3] = HEATER_3_MAXTEMP;
|
||||||
|
while(analog2temp(maxttemp_raw[3], 3) > HEATER_3_MAXTEMP) {
|
||||||
|
#if HEATER_3_RAW_LO_TEMP < HEATER_3_RAW_HI_TEMP
|
||||||
|
maxttemp_raw[3] -= OVERSAMPLENR;
|
||||||
|
#else
|
||||||
|
maxttemp_raw[3] += OVERSAMPLENR;
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
#endif // MAXTEMP 3
|
||||||
|
|
||||||
|
|
||||||
#ifdef BED_MINTEMP
|
#ifdef BED_MINTEMP
|
||||||
/* No bed MINTEMP error implemented?!? */ /*
|
/* No bed MINTEMP error implemented?!? */ /*
|
||||||
while(analog2tempBed(bed_minttemp_raw) < BED_MINTEMP) {
|
while(analog2tempBed(bed_minttemp_raw) < BED_MINTEMP) {
|
||||||
|
@ -1075,6 +1130,7 @@ void thermal_runaway_protection(int *state, unsigned long *timer, float temperat
|
||||||
disable_e0();
|
disable_e0();
|
||||||
disable_e1();
|
disable_e1();
|
||||||
disable_e2();
|
disable_e2();
|
||||||
|
disable_e3();
|
||||||
manage_heater();
|
manage_heater();
|
||||||
lcd_update();
|
lcd_update();
|
||||||
}
|
}
|
||||||
|
@ -1113,6 +1169,15 @@ void disable_heater()
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
#if defined(TEMP_3_PIN) && TEMP_3_PIN > -1 && EXTRUDERS > 3
|
||||||
|
target_temperature[3]=0;
|
||||||
|
soft_pwm[3]=0;
|
||||||
|
#if defined(HEATER_3_PIN) && HEATER_3_PIN > -1
|
||||||
|
WRITE(HEATER_3_PIN,LOW);
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
#if defined(TEMP_BED_PIN) && TEMP_BED_PIN > -1
|
#if defined(TEMP_BED_PIN) && TEMP_BED_PIN > -1
|
||||||
target_temperature_bed=0;
|
target_temperature_bed=0;
|
||||||
soft_pwm_bed=0;
|
soft_pwm_bed=0;
|
||||||
|
@ -1227,8 +1292,9 @@ ISR(TIMER0_COMPB_vect)
|
||||||
static unsigned long raw_temp_0_value = 0;
|
static unsigned long raw_temp_0_value = 0;
|
||||||
static unsigned long raw_temp_1_value = 0;
|
static unsigned long raw_temp_1_value = 0;
|
||||||
static unsigned long raw_temp_2_value = 0;
|
static unsigned long raw_temp_2_value = 0;
|
||||||
|
static unsigned long raw_temp_3_value = 0;
|
||||||
static unsigned long raw_temp_bed_value = 0;
|
static unsigned long raw_temp_bed_value = 0;
|
||||||
static unsigned char temp_state = 10;
|
static unsigned char temp_state = 12;
|
||||||
static unsigned char pwm_count = (1 << SOFT_PWM_SCALE);
|
static unsigned char pwm_count = (1 << SOFT_PWM_SCALE);
|
||||||
static unsigned char soft_pwm_0;
|
static unsigned char soft_pwm_0;
|
||||||
#ifdef SLOW_PWM_HEATERS
|
#ifdef SLOW_PWM_HEATERS
|
||||||
|
@ -1236,6 +1302,7 @@ ISR(TIMER0_COMPB_vect)
|
||||||
static unsigned char state_heater_0 = 0;
|
static unsigned char state_heater_0 = 0;
|
||||||
static unsigned char state_timer_heater_0 = 0;
|
static unsigned char state_timer_heater_0 = 0;
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#if (EXTRUDERS > 1) || defined(HEATERS_PARALLEL)
|
#if (EXTRUDERS > 1) || defined(HEATERS_PARALLEL)
|
||||||
static unsigned char soft_pwm_1;
|
static unsigned char soft_pwm_1;
|
||||||
#ifdef SLOW_PWM_HEATERS
|
#ifdef SLOW_PWM_HEATERS
|
||||||
|
@ -1250,6 +1317,14 @@ ISR(TIMER0_COMPB_vect)
|
||||||
static unsigned char state_timer_heater_2 = 0;
|
static unsigned char state_timer_heater_2 = 0;
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
#if EXTRUDERS > 3
|
||||||
|
static unsigned char soft_pwm_3;
|
||||||
|
#ifdef SLOW_PWM_HEATERS
|
||||||
|
static unsigned char state_heater_3 = 0;
|
||||||
|
static unsigned char state_timer_heater_3 = 0;
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
|
||||||
#if HEATER_BED_PIN > -1
|
#if HEATER_BED_PIN > -1
|
||||||
static unsigned char soft_pwm_b;
|
static unsigned char soft_pwm_b;
|
||||||
#ifdef SLOW_PWM_HEATERS
|
#ifdef SLOW_PWM_HEATERS
|
||||||
|
@ -1283,6 +1358,12 @@ ISR(TIMER0_COMPB_vect)
|
||||||
soft_pwm_2 = soft_pwm[2];
|
soft_pwm_2 = soft_pwm[2];
|
||||||
if(soft_pwm_2 > 0) WRITE(HEATER_2_PIN,1); else WRITE(HEATER_2_PIN,0);
|
if(soft_pwm_2 > 0) WRITE(HEATER_2_PIN,1); else WRITE(HEATER_2_PIN,0);
|
||||||
#endif
|
#endif
|
||||||
|
#if EXTRUDERS > 3
|
||||||
|
soft_pwm_3 = soft_pwm[3];
|
||||||
|
if(soft_pwm_3 > 0) WRITE(HEATER_3_PIN,1); else WRITE(HEATER_3_PIN,0);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
#if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1
|
#if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1
|
||||||
soft_pwm_b = soft_pwm_bed;
|
soft_pwm_b = soft_pwm_bed;
|
||||||
if(soft_pwm_b > 0) WRITE(HEATER_BED_PIN,1); else WRITE(HEATER_BED_PIN,0);
|
if(soft_pwm_b > 0) WRITE(HEATER_BED_PIN,1); else WRITE(HEATER_BED_PIN,0);
|
||||||
|
@ -1298,12 +1379,17 @@ ISR(TIMER0_COMPB_vect)
|
||||||
WRITE(HEATER_1_PIN,0);
|
WRITE(HEATER_1_PIN,0);
|
||||||
#endif
|
#endif
|
||||||
}
|
}
|
||||||
|
|
||||||
#if EXTRUDERS > 1
|
#if EXTRUDERS > 1
|
||||||
if(soft_pwm_1 < pwm_count) WRITE(HEATER_1_PIN,0);
|
if(soft_pwm_1 < pwm_count) WRITE(HEATER_1_PIN,0);
|
||||||
#endif
|
#endif
|
||||||
#if EXTRUDERS > 2
|
#if EXTRUDERS > 2
|
||||||
if(soft_pwm_2 < pwm_count) WRITE(HEATER_2_PIN,0);
|
if(soft_pwm_2 < pwm_count) WRITE(HEATER_2_PIN,0);
|
||||||
#endif
|
#endif
|
||||||
|
#if EXTRUDERS > 3
|
||||||
|
if(soft_pwm_3 < pwm_count) WRITE(HEATER_3_PIN,0);
|
||||||
|
#endif
|
||||||
|
|
||||||
#if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1
|
#if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1
|
||||||
if(soft_pwm_b < pwm_count) WRITE(HEATER_BED_PIN,0);
|
if(soft_pwm_b < pwm_count) WRITE(HEATER_BED_PIN,0);
|
||||||
#endif
|
#endif
|
||||||
|
@ -1406,6 +1492,32 @@ ISR(TIMER0_COMPB_vect)
|
||||||
}
|
}
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
#if EXTRUDERS > 3
|
||||||
|
// EXTRUDER 3
|
||||||
|
soft_pwm_3 = soft_pwm[3];
|
||||||
|
if (soft_pwm_3 > 0) {
|
||||||
|
// turn ON heather only if the minimum time is up
|
||||||
|
if (state_timer_heater_3 == 0) {
|
||||||
|
// if change state set timer
|
||||||
|
if (state_heater_3 == 0) {
|
||||||
|
state_timer_heater_3 = MIN_STATE_TIME;
|
||||||
|
}
|
||||||
|
state_heater_3 = 1;
|
||||||
|
WRITE(HEATER_3_PIN, 1);
|
||||||
|
}
|
||||||
|
} else {
|
||||||
|
// turn OFF heather only if the minimum time is up
|
||||||
|
if (state_timer_heater_3 == 0) {
|
||||||
|
// if change state set timer
|
||||||
|
if (state_heater_3 == 1) {
|
||||||
|
state_timer_heater_3 = MIN_STATE_TIME;
|
||||||
|
}
|
||||||
|
state_heater_3 = 0;
|
||||||
|
WRITE(HEATER_3_PIN, 0);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
#if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1
|
#if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1
|
||||||
// BED
|
// BED
|
||||||
soft_pwm_b = soft_pwm_bed;
|
soft_pwm_b = soft_pwm_bed;
|
||||||
|
@ -1479,6 +1591,21 @@ ISR(TIMER0_COMPB_vect)
|
||||||
}
|
}
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
#if EXTRUDERS > 3
|
||||||
|
// EXTRUDER 3
|
||||||
|
if (soft_pwm_3 < slow_pwm_count) {
|
||||||
|
// turn OFF heather only if the minimum time is up
|
||||||
|
if (state_timer_heater_3 == 0) {
|
||||||
|
// if change state set timer
|
||||||
|
if (state_heater_3 == 1) {
|
||||||
|
state_timer_heater_3 = MIN_STATE_TIME;
|
||||||
|
}
|
||||||
|
state_heater_3 = 0;
|
||||||
|
WRITE(HEATER_3_PIN, 0);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
#if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1
|
#if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1
|
||||||
// BED
|
// BED
|
||||||
if (soft_pwm_b < slow_pwm_count) {
|
if (soft_pwm_b < slow_pwm_count) {
|
||||||
|
@ -1527,6 +1654,12 @@ ISR(TIMER0_COMPB_vect)
|
||||||
state_timer_heater_2--;
|
state_timer_heater_2--;
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
#if EXTRUDERS > 3
|
||||||
|
// Extruder 3
|
||||||
|
if (state_timer_heater_3 > 0)
|
||||||
|
state_timer_heater_3--;
|
||||||
|
#endif
|
||||||
|
|
||||||
#if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1
|
#if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1
|
||||||
// Bed
|
// Bed
|
||||||
if (state_timer_heater_b > 0)
|
if (state_timer_heater_b > 0)
|
||||||
|
@ -1614,10 +1747,28 @@ ISR(TIMER0_COMPB_vect)
|
||||||
#if defined(TEMP_2_PIN) && (TEMP_2_PIN > -1)
|
#if defined(TEMP_2_PIN) && (TEMP_2_PIN > -1)
|
||||||
raw_temp_2_value += ADC;
|
raw_temp_2_value += ADC;
|
||||||
#endif
|
#endif
|
||||||
temp_state = 8;//change so that Filament Width is also measured
|
temp_state = 8;
|
||||||
|
|
||||||
break;
|
break;
|
||||||
case 8: //Prepare FILWIDTH
|
case 8: // Prepare TEMP_3
|
||||||
|
#if defined(TEMP_3_PIN) && (TEMP_3_PIN > -1)
|
||||||
|
#if TEMP_3_PIN > 7
|
||||||
|
ADCSRB = 1<<MUX5;
|
||||||
|
#else
|
||||||
|
ADCSRB = 0;
|
||||||
|
#endif
|
||||||
|
ADMUX = ((1 << REFS0) | (TEMP_3_PIN & 0x07));
|
||||||
|
ADCSRA |= 1<<ADSC; // Start conversion
|
||||||
|
#endif
|
||||||
|
lcd_buttons_update();
|
||||||
|
temp_state = 9;
|
||||||
|
break;
|
||||||
|
case 9: // Measure TEMP_3
|
||||||
|
#if defined(TEMP_3_PIN) && (TEMP_3_PIN > -1)
|
||||||
|
raw_temp_3_value += ADC;
|
||||||
|
#endif
|
||||||
|
temp_state = 10; //change so that Filament Width is also measured
|
||||||
|
break;
|
||||||
|
case 10: //Prepare FILWIDTH
|
||||||
#if defined(FILWIDTH_PIN) && (FILWIDTH_PIN> -1)
|
#if defined(FILWIDTH_PIN) && (FILWIDTH_PIN> -1)
|
||||||
#if FILWIDTH_PIN>7
|
#if FILWIDTH_PIN>7
|
||||||
ADCSRB = 1<<MUX5;
|
ADCSRB = 1<<MUX5;
|
||||||
|
@ -1628,9 +1779,9 @@ ISR(TIMER0_COMPB_vect)
|
||||||
ADCSRA |= 1<<ADSC; // Start conversion
|
ADCSRA |= 1<<ADSC; // Start conversion
|
||||||
#endif
|
#endif
|
||||||
lcd_buttons_update();
|
lcd_buttons_update();
|
||||||
temp_state = 9;
|
temp_state = 11;
|
||||||
break;
|
break;
|
||||||
case 9: //Measure FILWIDTH
|
case 11: //Measure FILWIDTH
|
||||||
#if defined(FILWIDTH_PIN) &&(FILWIDTH_PIN > -1)
|
#if defined(FILWIDTH_PIN) &&(FILWIDTH_PIN > -1)
|
||||||
//raw_filwidth_value += ADC; //remove to use an IIR filter approach
|
//raw_filwidth_value += ADC; //remove to use an IIR filter approach
|
||||||
if(ADC>102) //check that ADC is reading a voltage > 0.5 volts, otherwise don't take in the data.
|
if(ADC>102) //check that ADC is reading a voltage > 0.5 volts, otherwise don't take in the data.
|
||||||
|
@ -1646,7 +1797,7 @@ ISR(TIMER0_COMPB_vect)
|
||||||
break;
|
break;
|
||||||
|
|
||||||
|
|
||||||
case 10: //Startup, delay initial temp reading a tiny bit so the hardware can settle.
|
case 12: //Startup, delay initial temp reading a tiny bit so the hardware can settle.
|
||||||
temp_state = 0;
|
temp_state = 0;
|
||||||
break;
|
break;
|
||||||
// default:
|
// default:
|
||||||
|
@ -1668,6 +1819,9 @@ ISR(TIMER0_COMPB_vect)
|
||||||
#endif
|
#endif
|
||||||
#if EXTRUDERS > 2
|
#if EXTRUDERS > 2
|
||||||
current_temperature_raw[2] = raw_temp_2_value;
|
current_temperature_raw[2] = raw_temp_2_value;
|
||||||
|
#endif
|
||||||
|
#if EXTRUDERS > 3
|
||||||
|
current_temperature_raw[3] = raw_temp_3_value;
|
||||||
#endif
|
#endif
|
||||||
current_temperature_bed_raw = raw_temp_bed_value;
|
current_temperature_bed_raw = raw_temp_bed_value;
|
||||||
}
|
}
|
||||||
|
@ -1683,6 +1837,7 @@ ISR(TIMER0_COMPB_vect)
|
||||||
raw_temp_0_value = 0;
|
raw_temp_0_value = 0;
|
||||||
raw_temp_1_value = 0;
|
raw_temp_1_value = 0;
|
||||||
raw_temp_2_value = 0;
|
raw_temp_2_value = 0;
|
||||||
|
raw_temp_3_value = 0;
|
||||||
raw_temp_bed_value = 0;
|
raw_temp_bed_value = 0;
|
||||||
|
|
||||||
#if HEATER_0_RAW_LO_TEMP > HEATER_0_RAW_HI_TEMP
|
#if HEATER_0_RAW_LO_TEMP > HEATER_0_RAW_HI_TEMP
|
||||||
|
@ -1699,6 +1854,8 @@ ISR(TIMER0_COMPB_vect)
|
||||||
#endif
|
#endif
|
||||||
min_temp_error(0);
|
min_temp_error(0);
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
||||||
#if EXTRUDERS > 1
|
#if EXTRUDERS > 1
|
||||||
#if HEATER_1_RAW_LO_TEMP > HEATER_1_RAW_HI_TEMP
|
#if HEATER_1_RAW_LO_TEMP > HEATER_1_RAW_HI_TEMP
|
||||||
if(current_temperature_raw[1] <= maxttemp_raw[1]) {
|
if(current_temperature_raw[1] <= maxttemp_raw[1]) {
|
||||||
|
@ -1731,6 +1888,23 @@ ISR(TIMER0_COMPB_vect)
|
||||||
min_temp_error(2);
|
min_temp_error(2);
|
||||||
}
|
}
|
||||||
#endif
|
#endif
|
||||||
|
#if EXTRUDERS > 3
|
||||||
|
#if HEATER_3_RAW_LO_TEMP > HEATER_3_RAW_HI_TEMP
|
||||||
|
if(current_temperature_raw[3] <= maxttemp_raw[3]) {
|
||||||
|
#else
|
||||||
|
if(current_temperature_raw[3] >= maxttemp_raw[3]) {
|
||||||
|
#endif
|
||||||
|
max_temp_error(3);
|
||||||
|
}
|
||||||
|
#if HEATER_3_RAW_LO_TEMP > HEATER_3_RAW_HI_TEMP
|
||||||
|
if(current_temperature_raw[3] >= minttemp_raw[3]) {
|
||||||
|
#else
|
||||||
|
if(current_temperature_raw[3] <= minttemp_raw[3]) {
|
||||||
|
#endif
|
||||||
|
min_temp_error(3);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
/* No bed MINTEMP error? */
|
/* No bed MINTEMP error? */
|
||||||
#if defined(BED_MAXTEMP) && (TEMP_SENSOR_BED != 0)
|
#if defined(BED_MAXTEMP) && (TEMP_SENSOR_BED != 0)
|
||||||
|
@ -1790,5 +1964,3 @@ float unscalePID_d(float d)
|
||||||
}
|
}
|
||||||
|
|
||||||
#endif //PIDTEMP
|
#endif //PIDTEMP
|
||||||
|
|
||||||
|
|
||||||
|
|
|
@ -159,6 +159,15 @@ FORCE_INLINE bool isCoolingBed() {
|
||||||
#define setTargetHotend2(_celsius) do{}while(0)
|
#define setTargetHotend2(_celsius) do{}while(0)
|
||||||
#endif
|
#endif
|
||||||
#if EXTRUDERS > 3
|
#if EXTRUDERS > 3
|
||||||
|
#define degHotend3() degHotend(3)
|
||||||
|
#define degTargetHotend3() degTargetHotend(3)
|
||||||
|
#define setTargetHotend3(_celsius) setTargetHotend((_celsius), 3)
|
||||||
|
#define isHeatingHotend3() isHeatingHotend(3)
|
||||||
|
#define isCoolingHotend3() isCoolingHotend(3)
|
||||||
|
#else
|
||||||
|
#define setTargetHotend3(_celsius) do{}while(0)
|
||||||
|
#endif
|
||||||
|
#if EXTRUDERS > 4
|
||||||
#error Invalid number of extruders
|
#error Invalid number of extruders
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
@ -171,24 +180,24 @@ void updatePID();
|
||||||
|
|
||||||
#if defined (THERMAL_RUNAWAY_PROTECTION_PERIOD) && THERMAL_RUNAWAY_PROTECTION_PERIOD > 0
|
#if defined (THERMAL_RUNAWAY_PROTECTION_PERIOD) && THERMAL_RUNAWAY_PROTECTION_PERIOD > 0
|
||||||
void thermal_runaway_protection(int *state, unsigned long *timer, float temperature, float target_temperature, int heater_id, int period_seconds, int hysteresis_degc);
|
void thermal_runaway_protection(int *state, unsigned long *timer, float temperature, float target_temperature, int heater_id, int period_seconds, int hysteresis_degc);
|
||||||
static int thermal_runaway_state_machine[3]; // = {0,0,0};
|
static int thermal_runaway_state_machine[4]; // = {0,0,0,0};
|
||||||
static unsigned long thermal_runaway_timer[3]; // = {0,0,0};
|
static unsigned long thermal_runaway_timer[4]; // = {0,0,0,0};
|
||||||
static bool thermal_runaway = false;
|
static bool thermal_runaway = false;
|
||||||
#if TEMP_SENSOR_BED != 0
|
#if TEMP_SENSOR_BED != 0
|
||||||
static int thermal_runaway_bed_state_machine;
|
static int thermal_runaway_bed_state_machine;
|
||||||
static unsigned long thermal_runaway_bed_timer;
|
static unsigned long thermal_runaway_bed_timer;
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
FORCE_INLINE void autotempShutdown(){
|
FORCE_INLINE void autotempShutdown(){
|
||||||
#ifdef AUTOTEMP
|
#ifdef AUTOTEMP
|
||||||
if(autotemp_enabled)
|
if(autotemp_enabled)
|
||||||
{
|
{
|
||||||
autotemp_enabled=false;
|
autotemp_enabled=false;
|
||||||
if(degTargetHotend(active_extruder)>autotemp_min)
|
if(degTargetHotend(active_extruder)>autotemp_min)
|
||||||
setTargetHotend(0,active_extruder);
|
setTargetHotend(0,active_extruder);
|
||||||
}
|
}
|
||||||
#endif
|
#endif
|
||||||
}
|
}
|
||||||
|
|
||||||
void PID_autotune(float temp, int extruder, int ncycles);
|
void PID_autotune(float temp, int extruder, int ncycles);
|
||||||
|
@ -197,4 +206,3 @@ void setExtruderAutoFanState(int pin, bool state);
|
||||||
void checkExtruderAutoFans();
|
void checkExtruderAutoFans();
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
|
|
@ -5,7 +5,7 @@
|
||||||
|
|
||||||
#define OVERSAMPLENR 16
|
#define OVERSAMPLENR 16
|
||||||
|
|
||||||
#if (THERMISTORHEATER_0 == 1) || (THERMISTORHEATER_1 == 1) || (THERMISTORHEATER_2 == 1) || (THERMISTORBED == 1) //100k bed thermistor
|
#if (THERMISTORHEATER_0 == 1) || (THERMISTORHEATER_1 == 1) || (THERMISTORHEATER_2 == 1) || (THERMISTORHEATER_3 == 1) || (THERMISTORBED == 1) //100k bed thermistor
|
||||||
|
|
||||||
const short temptable_1[][2] PROGMEM = {
|
const short temptable_1[][2] PROGMEM = {
|
||||||
{ 23*OVERSAMPLENR , 300 },
|
{ 23*OVERSAMPLENR , 300 },
|
||||||
|
@ -71,7 +71,7 @@ const short temptable_1[][2] PROGMEM = {
|
||||||
{ 1008*OVERSAMPLENR , 0 } //safety
|
{ 1008*OVERSAMPLENR , 0 } //safety
|
||||||
};
|
};
|
||||||
#endif
|
#endif
|
||||||
#if (THERMISTORHEATER_0 == 2) || (THERMISTORHEATER_1 == 2) || (THERMISTORHEATER_2 == 2) || (THERMISTORBED == 2) //200k bed thermistor
|
#if (THERMISTORHEATER_0 == 2) || (THERMISTORHEATER_1 == 2) || (THERMISTORHEATER_2 == 2) || (THERMISTORHEATER_3 == 2) || (THERMISTORBED == 2) //200k bed thermistor
|
||||||
const short temptable_2[][2] PROGMEM = {
|
const short temptable_2[][2] PROGMEM = {
|
||||||
//200k ATC Semitec 204GT-2
|
//200k ATC Semitec 204GT-2
|
||||||
//Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
|
//Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
|
||||||
|
@ -111,7 +111,7 @@ const short temptable_2[][2] PROGMEM = {
|
||||||
};
|
};
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
#if (THERMISTORHEATER_0 == 3) || (THERMISTORHEATER_1 == 3) || (THERMISTORHEATER_2 == 3) || (THERMISTORBED == 3) //mendel-parts
|
#if (THERMISTORHEATER_0 == 3) || (THERMISTORHEATER_1 == 3) || (THERMISTORHEATER_2 == 3) || (THERMISTORHEATER_3 == 3) || (THERMISTORBED == 3) //mendel-parts
|
||||||
const short temptable_3[][2] PROGMEM = {
|
const short temptable_3[][2] PROGMEM = {
|
||||||
{1*OVERSAMPLENR,864},
|
{1*OVERSAMPLENR,864},
|
||||||
{21*OVERSAMPLENR,300},
|
{21*OVERSAMPLENR,300},
|
||||||
|
@ -144,7 +144,7 @@ const short temptable_3[][2] PROGMEM = {
|
||||||
};
|
};
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
#if (THERMISTORHEATER_0 == 4) || (THERMISTORHEATER_1 == 4) || (THERMISTORHEATER_2 == 4) || (THERMISTORBED == 4) //10k thermistor
|
#if (THERMISTORHEATER_0 == 4) || (THERMISTORHEATER_1 == 4) || (THERMISTORHEATER_2 == 4) || (THERMISTORHEATER_3 == 4) || (THERMISTORBED == 4) //10k thermistor
|
||||||
const short temptable_4[][2] PROGMEM = {
|
const short temptable_4[][2] PROGMEM = {
|
||||||
{1*OVERSAMPLENR, 430},
|
{1*OVERSAMPLENR, 430},
|
||||||
{54*OVERSAMPLENR, 137},
|
{54*OVERSAMPLENR, 137},
|
||||||
|
@ -169,7 +169,7 @@ const short temptable_4[][2] PROGMEM = {
|
||||||
};
|
};
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#if (THERMISTORHEATER_0 == 5) || (THERMISTORHEATER_1 == 5) || (THERMISTORHEATER_2 == 5) || (THERMISTORBED == 5) //100k ParCan thermistor (104GT-2)
|
#if (THERMISTORHEATER_0 == 5) || (THERMISTORHEATER_1 == 5) || (THERMISTORHEATER_2 == 5) || (THERMISTORHEATER_3 == 5) || (THERMISTORBED == 5) //100k ParCan thermistor (104GT-2)
|
||||||
const short temptable_5[][2] PROGMEM = {
|
const short temptable_5[][2] PROGMEM = {
|
||||||
// ATC Semitec 104GT-2 (Used in ParCan)
|
// ATC Semitec 104GT-2 (Used in ParCan)
|
||||||
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
|
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
|
||||||
|
@ -209,7 +209,7 @@ const short temptable_5[][2] PROGMEM = {
|
||||||
};
|
};
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#if (THERMISTORHEATER_0 == 6) || (THERMISTORHEATER_1 == 6) || (THERMISTORHEATER_2 == 6) || (THERMISTORBED == 6) // 100k Epcos thermistor
|
#if (THERMISTORHEATER_0 == 6) || (THERMISTORHEATER_1 == 6) || (THERMISTORHEATER_2 == 6) || (THERMISTORHEATER_3 == 6) || (THERMISTORBED == 6) // 100k Epcos thermistor
|
||||||
const short temptable_6[][2] PROGMEM = {
|
const short temptable_6[][2] PROGMEM = {
|
||||||
{1*OVERSAMPLENR, 350},
|
{1*OVERSAMPLENR, 350},
|
||||||
{28*OVERSAMPLENR, 250}, //top rating 250C
|
{28*OVERSAMPLENR, 250}, //top rating 250C
|
||||||
|
@ -252,7 +252,7 @@ const short temptable_6[][2] PROGMEM = {
|
||||||
};
|
};
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#if (THERMISTORHEATER_0 == 7) || (THERMISTORHEATER_1 == 7) || (THERMISTORHEATER_2 == 7) || (THERMISTORBED == 7) // 100k Honeywell 135-104LAG-J01
|
#if (THERMISTORHEATER_0 == 7) || (THERMISTORHEATER_1 == 7) || (THERMISTORHEATER_2 == 7) || (THERMISTORHEATER_3 == 7) || (THERMISTORBED == 7) // 100k Honeywell 135-104LAG-J01
|
||||||
const short temptable_7[][2] PROGMEM = {
|
const short temptable_7[][2] PROGMEM = {
|
||||||
{1*OVERSAMPLENR, 941},
|
{1*OVERSAMPLENR, 941},
|
||||||
{19*OVERSAMPLENR, 362},
|
{19*OVERSAMPLENR, 362},
|
||||||
|
@ -315,7 +315,7 @@ const short temptable_7[][2] PROGMEM = {
|
||||||
};
|
};
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#if (THERMISTORHEATER_0 == 71) || (THERMISTORHEATER_1 == 71) || (THERMISTORHEATER_2 == 71) || (THERMISTORBED == 71) // 100k Honeywell 135-104LAF-J01
|
#if (THERMISTORHEATER_0 == 71) || (THERMISTORHEATER_1 == 71) || (THERMISTORHEATER_2 == 71) || (THERMISTORHEATER_3 == 71) || (THERMISTORBED == 71) // 100k Honeywell 135-104LAF-J01
|
||||||
// R0 = 100000 Ohm
|
// R0 = 100000 Ohm
|
||||||
// T0 = 25 °C
|
// T0 = 25 °C
|
||||||
// Beta = 3974
|
// Beta = 3974
|
||||||
|
@ -466,7 +466,7 @@ const short temptable_71[][2] PROGMEM = {
|
||||||
};
|
};
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#if (THERMISTORHEATER_0 == 8) || (THERMISTORHEATER_1 == 8) || (THERMISTORHEATER_2 == 8) || (THERMISTORBED == 8)
|
#if (THERMISTORHEATER_0 == 8) || (THERMISTORHEATER_1 == 8) || (THERMISTORHEATER_2 == 8) || (THERMISTORHEATER_3 == 8) || (THERMISTORBED == 8)
|
||||||
// 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
// 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||||
const short temptable_8[][2] PROGMEM = {
|
const short temptable_8[][2] PROGMEM = {
|
||||||
{1*OVERSAMPLENR, 704},
|
{1*OVERSAMPLENR, 704},
|
||||||
|
@ -491,7 +491,7 @@ const short temptable_8[][2] PROGMEM = {
|
||||||
{1008*OVERSAMPLENR, 0}
|
{1008*OVERSAMPLENR, 0}
|
||||||
};
|
};
|
||||||
#endif
|
#endif
|
||||||
#if (THERMISTORHEATER_0 == 9) || (THERMISTORHEATER_1 == 9) || (THERMISTORHEATER_2 == 9) || (THERMISTORBED == 9)
|
#if (THERMISTORHEATER_0 == 9) || (THERMISTORHEATER_1 == 9) || (THERMISTORHEATER_2 == 9) || (THERMISTORHEATER_3 == 9) || (THERMISTORBED == 9)
|
||||||
// 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
// 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||||
const short temptable_9[][2] PROGMEM = {
|
const short temptable_9[][2] PROGMEM = {
|
||||||
{1*OVERSAMPLENR, 936},
|
{1*OVERSAMPLENR, 936},
|
||||||
|
@ -527,7 +527,7 @@ const short temptable_9[][2] PROGMEM = {
|
||||||
{1016*OVERSAMPLENR, 0}
|
{1016*OVERSAMPLENR, 0}
|
||||||
};
|
};
|
||||||
#endif
|
#endif
|
||||||
#if (THERMISTORHEATER_0 == 10) || (THERMISTORHEATER_1 == 10) || (THERMISTORHEATER_2 == 10) || (THERMISTORBED == 10)
|
#if (THERMISTORHEATER_0 == 10) || (THERMISTORHEATER_1 == 10) || (THERMISTORHEATER_2 == 10) || (THERMISTORHEATER_3 == 10) || (THERMISTORBED == 10)
|
||||||
// 100k RS thermistor 198-961 (4.7k pullup)
|
// 100k RS thermistor 198-961 (4.7k pullup)
|
||||||
const short temptable_10[][2] PROGMEM = {
|
const short temptable_10[][2] PROGMEM = {
|
||||||
{1*OVERSAMPLENR, 929},
|
{1*OVERSAMPLENR, 929},
|
||||||
|
@ -564,7 +564,7 @@ const short temptable_10[][2] PROGMEM = {
|
||||||
};
|
};
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#if (THERMISTORHEATER_0 == 11) || (THERMISTORHEATER_1 == 11) || (THERMISTORHEATER_2 == 11) || (THERMISTORBED == 11)
|
#if (THERMISTORHEATER_0 == 11) || (THERMISTORHEATER_1 == 11) || (THERMISTORHEATER_2 == 11) || (THERMISTORHEATER_3 == 11) || (THERMISTORBED == 11)
|
||||||
// QU-BD silicone bed QWG-104F-3950 thermistor
|
// QU-BD silicone bed QWG-104F-3950 thermistor
|
||||||
|
|
||||||
const short temptable_11[][2] PROGMEM = {
|
const short temptable_11[][2] PROGMEM = {
|
||||||
|
@ -621,7 +621,7 @@ const short temptable_11[][2] PROGMEM = {
|
||||||
};
|
};
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#if (THERMISTORHEATER_0 == 13) || (THERMISTORHEATER_1 == 13) || (THERMISTORHEATER_2 == 13) || (THERMISTORBED == 13)
|
#if (THERMISTORHEATER_0 == 13) || (THERMISTORHEATER_1 == 13) || (THERMISTORHEATER_2 == 13) || (THERMISTORHEATER_3 == 13) || (THERMISTORBED == 13)
|
||||||
// Hisens thermistor B25/50 =3950 +/-1%
|
// Hisens thermistor B25/50 =3950 +/-1%
|
||||||
|
|
||||||
const short temptable_13[][2] PROGMEM = {
|
const short temptable_13[][2] PROGMEM = {
|
||||||
|
@ -705,6 +705,10 @@ This does not match the normal thermistor behaviour so we need to set the follow
|
||||||
# define HEATER_2_RAW_HI_TEMP 16383
|
# define HEATER_2_RAW_HI_TEMP 16383
|
||||||
# define HEATER_2_RAW_LO_TEMP 0
|
# define HEATER_2_RAW_LO_TEMP 0
|
||||||
#endif
|
#endif
|
||||||
|
#if (THERMISTORHEATER_3 == 20)
|
||||||
|
# define HEATER_3_RAW_HI_TEMP 16383
|
||||||
|
# define HEATER_3_RAW_LO_TEMP 0
|
||||||
|
#endif
|
||||||
#if (THERMISTORBED == 20)
|
#if (THERMISTORBED == 20)
|
||||||
# define HEATER_BED_RAW_HI_TEMP 16383
|
# define HEATER_BED_RAW_HI_TEMP 16383
|
||||||
# define HEATER_BED_RAW_LO_TEMP 0
|
# define HEATER_BED_RAW_LO_TEMP 0
|
||||||
|
@ -762,7 +766,7 @@ const short temptable_20[][2] PROGMEM = {
|
||||||
};
|
};
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#if (THERMISTORHEATER_0 == 51) || (THERMISTORHEATER_1 == 51) || (THERMISTORHEATER_2 == 51) || (THERMISTORBED == 51)
|
#if (THERMISTORHEATER_0 == 51) || (THERMISTORHEATER_1 == 51) || (THERMISTORHEATER_2 == 51) || (THERMISTORHEATER_3 == 51) || (THERMISTORBED == 51)
|
||||||
// 100k EPCOS (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
|
// 100k EPCOS (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
|
||||||
// Verified by linagee.
|
// Verified by linagee.
|
||||||
// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
|
// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
|
||||||
|
@ -824,7 +828,7 @@ const short temptable_51[][2] PROGMEM = {
|
||||||
};
|
};
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#if (THERMISTORHEATER_0 == 52) || (THERMISTORHEATER_1 == 52) || (THERMISTORHEATER_2 == 52) || (THERMISTORBED == 52)
|
#if (THERMISTORHEATER_0 == 52) || (THERMISTORHEATER_1 == 52) || (THERMISTORHEATER_2 == 52) || (THERMISTORHEATER_3 == 52) || (THERMISTORBED == 52)
|
||||||
// 200k ATC Semitec 204GT-2 (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
|
// 200k ATC Semitec 204GT-2 (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
|
||||||
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
|
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
|
||||||
// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
|
// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
|
||||||
|
@ -865,7 +869,7 @@ const short temptable_52[][2] PROGMEM = {
|
||||||
};
|
};
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#if (THERMISTORHEATER_0 == 55) || (THERMISTORHEATER_1 == 55) || (THERMISTORHEATER_2 == 55) || (THERMISTORBED == 55)
|
#if (THERMISTORHEATER_0 == 55) || (THERMISTORHEATER_1 == 55) || (THERMISTORHEATER_2 == 55) || (THERMISTORHEATER_3 == 55) || (THERMISTORBED == 55)
|
||||||
// 100k ATC Semitec 104GT-2 (Used on ParCan) (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
|
// 100k ATC Semitec 104GT-2 (Used on ParCan) (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
|
||||||
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
|
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
|
||||||
// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
|
// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
|
||||||
|
@ -906,7 +910,7 @@ const short temptable_55[][2] PROGMEM = {
|
||||||
};
|
};
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#if (THERMISTORHEATER_0 == 60) || (THERMISTORHEATER_1 == 60) || (THERMISTORHEATER_2 == 60) || (THERMISTORBED == 60) // Maker's Tool Works Kapton Bed Thermister
|
#if (THERMISTORHEATER_0 == 60) || (THERMISTORHEATER_1 == 60) || (THERMISTORHEATER_2 == 60) || (THERMISTORHEATER_3 == 60) || (THERMISTORBED == 60) // Maker's Tool Works Kapton Bed Thermister
|
||||||
// ./createTemperatureLookup.py --r0=100000 --t0=25 --r1=0 --r2=4700 --beta=3950
|
// ./createTemperatureLookup.py --r0=100000 --t0=25 --r1=0 --r2=4700 --beta=3950
|
||||||
// r0: 100000
|
// r0: 100000
|
||||||
// t0: 25
|
// t0: 25
|
||||||
|
@ -1037,7 +1041,7 @@ const short temptable_12[][2] PROGMEM = {
|
||||||
#define PtAdVal(T,R0,Rup) (short)(1024/(Rup/PtRt(T,R0)+1))
|
#define PtAdVal(T,R0,Rup) (short)(1024/(Rup/PtRt(T,R0)+1))
|
||||||
#define PtLine(T,R0,Rup) { PtAdVal(T,R0,Rup)*OVERSAMPLENR, T },
|
#define PtLine(T,R0,Rup) { PtAdVal(T,R0,Rup)*OVERSAMPLENR, T },
|
||||||
|
|
||||||
#if (THERMISTORHEATER_0 == 110) || (THERMISTORHEATER_1 == 110) || (THERMISTORHEATER_2 == 110) || (THERMISTORBED == 110) // Pt100 with 1k0 pullup
|
#if (THERMISTORHEATER_0 == 110) || (THERMISTORHEATER_1 == 110) || (THERMISTORHEATER_2 == 110) || (THERMISTORHEATER_3 == 110) || (THERMISTORBED == 110) // Pt100 with 1k0 pullup
|
||||||
const short temptable_110[][2] PROGMEM = {
|
const short temptable_110[][2] PROGMEM = {
|
||||||
// only few values are needed as the curve is very flat
|
// only few values are needed as the curve is very flat
|
||||||
PtLine(0,100,1000)
|
PtLine(0,100,1000)
|
||||||
|
@ -1049,7 +1053,7 @@ const short temptable_110[][2] PROGMEM = {
|
||||||
PtLine(300,100,1000)
|
PtLine(300,100,1000)
|
||||||
};
|
};
|
||||||
#endif
|
#endif
|
||||||
#if (THERMISTORHEATER_0 == 147) || (THERMISTORHEATER_1 == 147) || (THERMISTORHEATER_2 == 147) || (THERMISTORBED == 147) // Pt100 with 4k7 pullup
|
#if (THERMISTORHEATER_0 == 147) || (THERMISTORHEATER_1 == 147) || (THERMISTORHEATER_2 == 147) || (THERMISTORHEATER_3 == 147) || (THERMISTORBED == 147) // Pt100 with 4k7 pullup
|
||||||
const short temptable_147[][2] PROGMEM = {
|
const short temptable_147[][2] PROGMEM = {
|
||||||
// only few values are needed as the curve is very flat
|
// only few values are needed as the curve is very flat
|
||||||
PtLine(0,100,4700)
|
PtLine(0,100,4700)
|
||||||
|
@ -1061,7 +1065,7 @@ const short temptable_147[][2] PROGMEM = {
|
||||||
PtLine(300,100,4700)
|
PtLine(300,100,4700)
|
||||||
};
|
};
|
||||||
#endif
|
#endif
|
||||||
#if (THERMISTORHEATER_0 == 1010) || (THERMISTORHEATER_1 == 1010) || (THERMISTORHEATER_2 == 1010) || (THERMISTORBED == 1010) // Pt1000 with 1k0 pullup
|
#if (THERMISTORHEATER_0 == 1010) || (THERMISTORHEATER_1 == 1010) || (THERMISTORHEATER_2 == 1010) || (THERMISTORHEATER_3 == 1010) || (THERMISTORBED == 1010) // Pt1000 with 1k0 pullup
|
||||||
const short temptable_1010[][2] PROGMEM = {
|
const short temptable_1010[][2] PROGMEM = {
|
||||||
PtLine(0,1000,1000)
|
PtLine(0,1000,1000)
|
||||||
PtLine(25,1000,1000)
|
PtLine(25,1000,1000)
|
||||||
|
@ -1078,7 +1082,7 @@ const short temptable_1010[][2] PROGMEM = {
|
||||||
PtLine(300,1000,1000)
|
PtLine(300,1000,1000)
|
||||||
};
|
};
|
||||||
#endif
|
#endif
|
||||||
#if (THERMISTORHEATER_0 == 1047) || (THERMISTORHEATER_1 == 1047) || (THERMISTORHEATER_2 == 1047) || (THERMISTORBED == 1047) // Pt1000 with 4k7 pullup
|
#if (THERMISTORHEATER_0 == 1047) || (THERMISTORHEATER_1 == 1047) || (THERMISTORHEATER_2 == 1047) || (THERMISTORHEATER_3 == 1047) || (THERMISTORBED == 1047) // Pt1000 with 4k7 pullup
|
||||||
const short temptable_1047[][2] PROGMEM = {
|
const short temptable_1047[][2] PROGMEM = {
|
||||||
// only few values are needed as the curve is very flat
|
// only few values are needed as the curve is very flat
|
||||||
PtLine(0,1000,4700)
|
PtLine(0,1000,4700)
|
||||||
|
@ -1163,6 +1167,29 @@ const short temptable_1047[][2] PROGMEM = {
|
||||||
# endif
|
# endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
#ifdef THERMISTORHEATER_3
|
||||||
|
# define HEATER_3_TEMPTABLE TT_NAME(THERMISTORHEATER_3)
|
||||||
|
# define HEATER_3_TEMPTABLE_LEN (sizeof(HEATER_3_TEMPTABLE)/sizeof(*HEATER_3_TEMPTABLE))
|
||||||
|
#else
|
||||||
|
# ifdef HEATER_3_USES_THERMISTOR
|
||||||
|
# error No heater 3 thermistor table specified
|
||||||
|
# else // HEATER_3_USES_THERMISTOR
|
||||||
|
# define HEATER_3_TEMPTABLE NULL
|
||||||
|
# define HEATER_3_TEMPTABLE_LEN 0
|
||||||
|
# endif // HEATER_3_USES_THERMISTOR
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//Set the high and low raw values for the heater, this indicates which raw value is a high or low temperature
|
||||||
|
#ifndef HEATER_3_RAW_HI_TEMP
|
||||||
|
# ifdef HEATER_3_USES_THERMISTOR //In case of a thermistor the highest temperature results in the lowest ADC value
|
||||||
|
# define HEATER_3_RAW_HI_TEMP 0
|
||||||
|
# define HEATER_3_RAW_LO_TEMP 16383
|
||||||
|
# else //In case of an thermocouple the highest temperature results in the highest ADC value
|
||||||
|
# define HEATER_3_RAW_HI_TEMP 16383
|
||||||
|
# define HEATER_3_RAW_LO_TEMP 0
|
||||||
|
# endif
|
||||||
|
#endif
|
||||||
|
|
||||||
#ifdef THERMISTORBED
|
#ifdef THERMISTORBED
|
||||||
# define BEDTEMPTABLE TT_NAME(THERMISTORBED)
|
# define BEDTEMPTABLE TT_NAME(THERMISTORBED)
|
||||||
# define BEDTEMPTABLE_LEN (sizeof(BEDTEMPTABLE)/sizeof(*BEDTEMPTABLE))
|
# define BEDTEMPTABLE_LEN (sizeof(BEDTEMPTABLE)/sizeof(*BEDTEMPTABLE))
|
||||||
|
|
|
@ -431,6 +431,11 @@ static void lcd_tune_menu()
|
||||||
#if TEMP_SENSOR_2 != 0
|
#if TEMP_SENSOR_2 != 0
|
||||||
MENU_ITEM_EDIT(int3, MSG_NOZZLE2, &target_temperature[2], 0, HEATER_2_MAXTEMP - 15);
|
MENU_ITEM_EDIT(int3, MSG_NOZZLE2, &target_temperature[2], 0, HEATER_2_MAXTEMP - 15);
|
||||||
#endif
|
#endif
|
||||||
|
#if TEMP_SENSOR_3 != 0
|
||||||
|
MENU_ITEM_EDIT(int3, MSG_NOZZLE3, &target_temperature[3], 0, HEATER_3_MAXTEMP - 15);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
#if TEMP_SENSOR_BED != 0
|
#if TEMP_SENSOR_BED != 0
|
||||||
MENU_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP - 15);
|
MENU_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP - 15);
|
||||||
#endif
|
#endif
|
||||||
|
@ -443,6 +448,10 @@ static void lcd_tune_menu()
|
||||||
#if TEMP_SENSOR_2 != 0
|
#if TEMP_SENSOR_2 != 0
|
||||||
MENU_ITEM_EDIT(int3, MSG_FLOW2, &extruder_multiply[2], 10, 999);
|
MENU_ITEM_EDIT(int3, MSG_FLOW2, &extruder_multiply[2], 10, 999);
|
||||||
#endif
|
#endif
|
||||||
|
#if TEMP_SENSOR_3 != 0
|
||||||
|
MENU_ITEM_EDIT(int3, MSG_FLOW3, &extruder_multiply[3], 10, 999);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
#ifdef BABYSTEPPING
|
#ifdef BABYSTEPPING
|
||||||
#ifdef BABYSTEP_XY
|
#ifdef BABYSTEP_XY
|
||||||
|
@ -515,23 +524,46 @@ void lcd_preheat_abs2()
|
||||||
}
|
}
|
||||||
#endif //3 extruder preheat
|
#endif //3 extruder preheat
|
||||||
|
|
||||||
#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 //more than one extruder present
|
#if TEMP_SENSOR_3 != 0 //4 extruder preheat
|
||||||
void lcd_preheat_pla012()
|
void lcd_preheat_pla3()
|
||||||
{
|
{
|
||||||
setTargetHotend0(plaPreheatHotendTemp);
|
setTargetHotend3(plaPreheatHotendTemp);
|
||||||
setTargetHotend1(plaPreheatHotendTemp);
|
|
||||||
setTargetHotend2(plaPreheatHotendTemp);
|
|
||||||
setTargetBed(plaPreheatHPBTemp);
|
setTargetBed(plaPreheatHPBTemp);
|
||||||
fanSpeed = plaPreheatFanSpeed;
|
fanSpeed = plaPreheatFanSpeed;
|
||||||
lcd_return_to_status();
|
lcd_return_to_status();
|
||||||
setWatch(); // heater sanity check timer
|
setWatch(); // heater sanity check timer
|
||||||
}
|
}
|
||||||
|
|
||||||
void lcd_preheat_abs012()
|
void lcd_preheat_abs3()
|
||||||
|
{
|
||||||
|
setTargetHotend3(absPreheatHotendTemp);
|
||||||
|
setTargetBed(absPreheatHPBTemp);
|
||||||
|
fanSpeed = absPreheatFanSpeed;
|
||||||
|
lcd_return_to_status();
|
||||||
|
setWatch(); // heater sanity check timer
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif //4 extruder preheat
|
||||||
|
|
||||||
|
#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_3 != 0 //more than one extruder present
|
||||||
|
void lcd_preheat_pla0123()
|
||||||
|
{
|
||||||
|
setTargetHotend0(plaPreheatHotendTemp);
|
||||||
|
setTargetHotend1(plaPreheatHotendTemp);
|
||||||
|
setTargetHotend2(plaPreheatHotendTemp);
|
||||||
|
setTargetHotend3(plaPreheatHotendTemp);
|
||||||
|
setTargetBed(plaPreheatHPBTemp);
|
||||||
|
fanSpeed = plaPreheatFanSpeed;
|
||||||
|
lcd_return_to_status();
|
||||||
|
setWatch(); // heater sanity check timer
|
||||||
|
}
|
||||||
|
|
||||||
|
void lcd_preheat_abs0123()
|
||||||
{
|
{
|
||||||
setTargetHotend0(absPreheatHotendTemp);
|
setTargetHotend0(absPreheatHotendTemp);
|
||||||
setTargetHotend1(absPreheatHotendTemp);
|
setTargetHotend1(absPreheatHotendTemp);
|
||||||
setTargetHotend2(absPreheatHotendTemp);
|
setTargetHotend2(absPreheatHotendTemp);
|
||||||
|
setTargetHotend3(absPreheatHotendTemp);
|
||||||
setTargetBed(absPreheatHPBTemp);
|
setTargetBed(absPreheatHPBTemp);
|
||||||
fanSpeed = absPreheatFanSpeed;
|
fanSpeed = absPreheatFanSpeed;
|
||||||
lcd_return_to_status();
|
lcd_return_to_status();
|
||||||
|
@ -557,42 +589,49 @@ void lcd_preheat_abs_bedonly()
|
||||||
|
|
||||||
static void lcd_preheat_pla_menu()
|
static void lcd_preheat_pla_menu()
|
||||||
{
|
{
|
||||||
START_MENU();
|
START_MENU();
|
||||||
MENU_ITEM(back, MSG_PREPARE, lcd_prepare_menu);
|
MENU_ITEM(back, MSG_PREPARE, lcd_prepare_menu);
|
||||||
MENU_ITEM(function, MSG_PREHEAT_PLA0, lcd_preheat_pla0);
|
MENU_ITEM(function, MSG_PREHEAT_PLA0, lcd_preheat_pla0);
|
||||||
#if TEMP_SENSOR_1 != 0 //2 extruder preheat
|
#if TEMP_SENSOR_1 != 0 //2 extruder preheat
|
||||||
MENU_ITEM(function, MSG_PREHEAT_PLA1, lcd_preheat_pla1);
|
MENU_ITEM(function, MSG_PREHEAT_PLA1, lcd_preheat_pla1);
|
||||||
#endif //2 extruder preheat
|
#endif //2 extruder preheat
|
||||||
#if TEMP_SENSOR_2 != 0 //3 extruder preheat
|
#if TEMP_SENSOR_2 != 0 //3 extruder preheat
|
||||||
MENU_ITEM(function, MSG_PREHEAT_PLA2, lcd_preheat_pla2);
|
MENU_ITEM(function, MSG_PREHEAT_PLA2, lcd_preheat_pla2);
|
||||||
#endif //3 extruder preheat
|
#endif //3 extruder preheat
|
||||||
#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 //all extruder preheat
|
#if TEMP_SENSOR_3 != 0 //4 extruder preheat
|
||||||
MENU_ITEM(function, MSG_PREHEAT_PLA012, lcd_preheat_pla012);
|
MENU_ITEM(function, MSG_PREHEAT_PLA3, lcd_preheat_pla3);
|
||||||
#endif //2 extruder preheat
|
#endif //4 extruder preheat
|
||||||
|
#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_3 != 0 //all extruder preheat
|
||||||
|
MENU_ITEM(function, MSG_PREHEAT_PLA0123, lcd_preheat_pla0123);
|
||||||
|
#endif //all extruder preheat
|
||||||
#if TEMP_SENSOR_BED != 0
|
#if TEMP_SENSOR_BED != 0
|
||||||
MENU_ITEM(function, MSG_PREHEAT_PLA_BEDONLY, lcd_preheat_pla_bedonly);
|
MENU_ITEM(function, MSG_PREHEAT_PLA_BEDONLY, lcd_preheat_pla_bedonly);
|
||||||
#endif
|
#endif
|
||||||
END_MENU();
|
END_MENU();
|
||||||
}
|
}
|
||||||
|
|
||||||
static void lcd_preheat_abs_menu()
|
static void lcd_preheat_abs_menu()
|
||||||
{
|
{
|
||||||
START_MENU();
|
START_MENU();
|
||||||
MENU_ITEM(back, MSG_PREPARE, lcd_prepare_menu);
|
MENU_ITEM(back, MSG_PREPARE, lcd_prepare_menu);
|
||||||
MENU_ITEM(function, MSG_PREHEAT_ABS0, lcd_preheat_abs0);
|
MENU_ITEM(function, MSG_PREHEAT_ABS0, lcd_preheat_abs0);
|
||||||
#if TEMP_SENSOR_1 != 0 //2 extruder preheat
|
#if TEMP_SENSOR_1 != 0 //2 extruder preheat
|
||||||
MENU_ITEM(function, MSG_PREHEAT_ABS1, lcd_preheat_abs1);
|
MENU_ITEM(function, MSG_PREHEAT_ABS1, lcd_preheat_abs1);
|
||||||
#endif //2 extruder preheat
|
#endif //2 extruder preheat
|
||||||
#if TEMP_SENSOR_2 != 0 //3 extruder preheat
|
#if TEMP_SENSOR_2 != 0 //3 extruder preheat
|
||||||
MENU_ITEM(function, MSG_PREHEAT_ABS2, lcd_preheat_abs2);
|
MENU_ITEM(function, MSG_PREHEAT_ABS2, lcd_preheat_abs2);
|
||||||
#endif //3 extruder preheat
|
#endif //3 extruder preheat
|
||||||
#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 //all extruder preheat
|
#if TEMP_SENSOR_3 != 0 //4 extruder preheat
|
||||||
MENU_ITEM(function, MSG_PREHEAT_ABS012, lcd_preheat_abs012);
|
MENU_ITEM(function, MSG_PREHEAT_ABS3, lcd_preheat_abs3);
|
||||||
#endif //2 extruder preheat
|
#endif //4 extruder preheat
|
||||||
|
#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_3 != 0 //all extruder preheat
|
||||||
|
MENU_ITEM(function, MSG_PREHEAT_ABS0123, lcd_preheat_abs0123);
|
||||||
|
#endif //all extruder preheat
|
||||||
|
|
||||||
#if TEMP_SENSOR_BED != 0
|
#if TEMP_SENSOR_BED != 0
|
||||||
MENU_ITEM(function, MSG_PREHEAT_ABS_BEDONLY, lcd_preheat_abs_bedonly);
|
MENU_ITEM(function, MSG_PREHEAT_ABS_BEDONLY, lcd_preheat_abs_bedonly);
|
||||||
#endif
|
#endif
|
||||||
END_MENU();
|
END_MENU();
|
||||||
}
|
}
|
||||||
|
|
||||||
void lcd_cooldown()
|
void lcd_cooldown()
|
||||||
|
@ -600,6 +639,7 @@ void lcd_cooldown()
|
||||||
setTargetHotend0(0);
|
setTargetHotend0(0);
|
||||||
setTargetHotend1(0);
|
setTargetHotend1(0);
|
||||||
setTargetHotend2(0);
|
setTargetHotend2(0);
|
||||||
|
setTargetHotend3(0);
|
||||||
setTargetBed(0);
|
setTargetBed(0);
|
||||||
fanSpeed = 0;
|
fanSpeed = 0;
|
||||||
lcd_return_to_status();
|
lcd_return_to_status();
|
||||||
|
@ -747,7 +787,7 @@ static void lcd_control_menu()
|
||||||
MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
|
MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
|
||||||
MENU_ITEM(submenu, MSG_TEMPERATURE, lcd_control_temperature_menu);
|
MENU_ITEM(submenu, MSG_TEMPERATURE, lcd_control_temperature_menu);
|
||||||
MENU_ITEM(submenu, MSG_MOTION, lcd_control_motion_menu);
|
MENU_ITEM(submenu, MSG_MOTION, lcd_control_motion_menu);
|
||||||
MENU_ITEM(submenu, MSG_VOLUMETRIC, lcd_control_volumetric_menu);
|
MENU_ITEM(submenu, MSG_VOLUMETRIC, lcd_control_volumetric_menu);
|
||||||
|
|
||||||
#ifdef DOGLCD
|
#ifdef DOGLCD
|
||||||
// MENU_ITEM_EDIT(int3, MSG_CONTRAST, &lcd_contrast, 0, 63);
|
// MENU_ITEM_EDIT(int3, MSG_CONTRAST, &lcd_contrast, 0, 63);
|
||||||
|
@ -766,26 +806,29 @@ static void lcd_control_menu()
|
||||||
|
|
||||||
static void lcd_control_temperature_menu()
|
static void lcd_control_temperature_menu()
|
||||||
{
|
{
|
||||||
START_MENU();
|
START_MENU();
|
||||||
MENU_ITEM(back, MSG_CONTROL, lcd_control_menu);
|
MENU_ITEM(back, MSG_CONTROL, lcd_control_menu);
|
||||||
#if TEMP_SENSOR_0 != 0
|
#if TEMP_SENSOR_0 != 0
|
||||||
MENU_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15);
|
MENU_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15);
|
||||||
#endif
|
#endif
|
||||||
#if TEMP_SENSOR_1 != 0
|
#if TEMP_SENSOR_1 != 0
|
||||||
MENU_ITEM_EDIT(int3, MSG_NOZZLE1, &target_temperature[1], 0, HEATER_1_MAXTEMP - 15);
|
MENU_ITEM_EDIT(int3, MSG_NOZZLE1, &target_temperature[1], 0, HEATER_1_MAXTEMP - 15);
|
||||||
#endif
|
#endif
|
||||||
#if TEMP_SENSOR_2 != 0
|
#if TEMP_SENSOR_2 != 0
|
||||||
MENU_ITEM_EDIT(int3, MSG_NOZZLE2, &target_temperature[2], 0, HEATER_2_MAXTEMP - 15);
|
MENU_ITEM_EDIT(int3, MSG_NOZZLE2, &target_temperature[2], 0, HEATER_2_MAXTEMP - 15);
|
||||||
|
#endif
|
||||||
|
#if TEMP_SENSOR_3 != 0
|
||||||
|
MENU_ITEM_EDIT(int3, MSG_NOZZLE3, &target_temperature[3], 0, HEATER_3_MAXTEMP - 15);
|
||||||
#endif
|
#endif
|
||||||
#if TEMP_SENSOR_BED != 0
|
#if TEMP_SENSOR_BED != 0
|
||||||
MENU_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP - 15);
|
MENU_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP - 15);
|
||||||
#endif
|
#endif
|
||||||
MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255);
|
MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255);
|
||||||
#if defined AUTOTEMP && (TEMP_SENSOR_0 != 0)
|
#if defined AUTOTEMP && (TEMP_SENSOR_0 != 0)
|
||||||
MENU_ITEM_EDIT(bool, MSG_AUTOTEMP, &autotemp_enabled);
|
MENU_ITEM_EDIT(bool, MSG_AUTOTEMP, &autotemp_enabled);
|
||||||
MENU_ITEM_EDIT(float3, MSG_MIN, &autotemp_min, 0, HEATER_0_MAXTEMP - 15);
|
MENU_ITEM_EDIT(float3, MSG_MIN, &autotemp_min, 0, HEATER_0_MAXTEMP - 15);
|
||||||
MENU_ITEM_EDIT(float3, MSG_MAX, &autotemp_max, 0, HEATER_0_MAXTEMP - 15);
|
MENU_ITEM_EDIT(float3, MSG_MAX, &autotemp_max, 0, HEATER_0_MAXTEMP - 15);
|
||||||
MENU_ITEM_EDIT(float32, MSG_FACTOR, &autotemp_factor, 0.0, 1.0);
|
MENU_ITEM_EDIT(float32, MSG_FACTOR, &autotemp_factor, 0.0, 1.0);
|
||||||
#endif
|
#endif
|
||||||
#ifdef PIDTEMP
|
#ifdef PIDTEMP
|
||||||
// set up temp variables - undo the default scaling
|
// set up temp variables - undo the default scaling
|
||||||
|
@ -916,13 +959,15 @@ static void lcd_control_volumetric_menu()
|
||||||
MENU_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_1, &filament_size[1], DEFAULT_NOMINAL_FILAMENT_DIA - .5, DEFAULT_NOMINAL_FILAMENT_DIA + .5, calculate_volumetric_multipliers);
|
MENU_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_1, &filament_size[1], DEFAULT_NOMINAL_FILAMENT_DIA - .5, DEFAULT_NOMINAL_FILAMENT_DIA + .5, calculate_volumetric_multipliers);
|
||||||
#if EXTRUDERS > 2
|
#if EXTRUDERS > 2
|
||||||
MENU_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_2, &filament_size[2], DEFAULT_NOMINAL_FILAMENT_DIA - .5, DEFAULT_NOMINAL_FILAMENT_DIA + .5, calculate_volumetric_multipliers);
|
MENU_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_2, &filament_size[2], DEFAULT_NOMINAL_FILAMENT_DIA - .5, DEFAULT_NOMINAL_FILAMENT_DIA + .5, calculate_volumetric_multipliers);
|
||||||
#endif
|
#if EXTRUDERS > 3
|
||||||
#endif
|
MENU_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_3, &filament_size[3], DEFAULT_NOMINAL_FILAMENT_DIA - .5, DEFAULT_NOMINAL_FILAMENT_DIA + .5, calculate_volumetric_multipliers);
|
||||||
|
#endif //EXTRUDERS > 3
|
||||||
|
#endif //EXTRUDERS > 2
|
||||||
|
#endif //EXTRUDERS > 1
|
||||||
}
|
}
|
||||||
|
|
||||||
END_MENU();
|
END_MENU();
|
||||||
}
|
}
|
||||||
|
|
||||||
#ifdef DOGLCD
|
#ifdef DOGLCD
|
||||||
static void lcd_set_contrast()
|
static void lcd_set_contrast()
|
||||||
{
|
{
|
||||||
|
@ -950,19 +995,18 @@ static void lcd_control_retract_menu()
|
||||||
MENU_ITEM(back, MSG_CONTROL, lcd_control_menu);
|
MENU_ITEM(back, MSG_CONTROL, lcd_control_menu);
|
||||||
MENU_ITEM_EDIT(bool, MSG_AUTORETRACT, &autoretract_enabled);
|
MENU_ITEM_EDIT(bool, MSG_AUTORETRACT, &autoretract_enabled);
|
||||||
MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT, &retract_length, 0, 100);
|
MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT, &retract_length, 0, 100);
|
||||||
#if EXTRUDERS > 1
|
#if EXTRUDERS > 1
|
||||||
MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_SWAP, &retract_length_swap, 0, 100);
|
MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_SWAP, &retract_length_swap, 0, 100);
|
||||||
#endif
|
#endif
|
||||||
MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACTF, &retract_feedrate, 1, 999);
|
MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACTF, &retract_feedrate, 1, 999);
|
||||||
MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_ZLIFT, &retract_zlift, 0, 999);
|
MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_ZLIFT, &retract_zlift, 0, 999);
|
||||||
MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_RECOVER, &retract_recover_length, 0, 100);
|
MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_RECOVER, &retract_recover_length, 0, 100);
|
||||||
#if EXTRUDERS > 1
|
#if EXTRUDERS > 1
|
||||||
MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_RECOVER_SWAP, &retract_recover_length_swap, 0, 100);
|
MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_RECOVER_SWAP, &retract_recover_length_swap, 0, 100);
|
||||||
#endif
|
#endif
|
||||||
MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACT_RECOVERF, &retract_recover_feedrate, 1, 999);
|
MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACT_RECOVERF, &retract_recover_feedrate, 1, 999);
|
||||||
END_MENU();
|
END_MENU();
|
||||||
}
|
}
|
||||||
|
|
||||||
#endif //FWRETRACT
|
#endif //FWRETRACT
|
||||||
|
|
||||||
#if SDCARDDETECT == -1
|
#if SDCARDDETECT == -1
|
||||||
|
|
|
@ -46,9 +46,9 @@
|
||||||
|
|
||||||
extern bool cancel_heatup;
|
extern bool cancel_heatup;
|
||||||
|
|
||||||
#ifdef FILAMENT_LCD_DISPLAY
|
#ifdef FILAMENT_LCD_DISPLAY
|
||||||
extern unsigned long message_millis;
|
extern unsigned long message_millis;
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
void lcd_buzz(long duration,uint16_t freq);
|
void lcd_buzz(long duration,uint16_t freq);
|
||||||
bool lcd_clicked();
|
bool lcd_clicked();
|
||||||
|
|
Reference in a new issue