diff --git a/Marlin/src/HAL/HAL_DUE/pinsDebug.h b/Marlin/src/HAL/HAL_DUE/pinsDebug.h
index e4da398cc..ed78f8adb 100644
--- a/Marlin/src/HAL/HAL_DUE/pinsDebug.h
+++ b/Marlin/src/HAL/HAL_DUE/pinsDebug.h
@@ -62,7 +62,6 @@
 
 #define digitalRead_mod(p) extDigitalRead(p)  // AVR digitalRead disabled PWM before it read the pin
 #define PRINT_PORT(p)
-#define NAME_FORMAT(p) PSTR("%-##p##s")
 #define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
 #define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%02d"), p); SERIAL_ECHO(buffer); }while(0)
 #define GET_ARRAY_PIN(p) pin_array[p].pin
diff --git a/Marlin/src/HAL/HAL_LINUX/pinsDebug.h b/Marlin/src/HAL/HAL_LINUX/pinsDebug.h
index 702a73bf7..a28d2b60b 100644
--- a/Marlin/src/HAL/HAL_LINUX/pinsDebug.h
+++ b/Marlin/src/HAL/HAL_LINUX/pinsDebug.h
@@ -32,7 +32,6 @@
 #define digitalRead_mod(p)  digitalRead(p)
 #define PRINT_PORT(p)
 #define GET_ARRAY_PIN(p) pin_array[p].pin
-#define NAME_FORMAT(p) PSTR("%-##p##s")
 #define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
 #define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0)
 #define MULTI_NAME_PAD 16 // space needed to be pretty if not first name assigned to a pin
diff --git a/Marlin/src/HAL/HAL_LINUX/spi_pins.h b/Marlin/src/HAL/HAL_LINUX/spi_pins.h
index 62b643cc0..fdd09b1c0 100644
--- a/Marlin/src/HAL/HAL_LINUX/spi_pins.h
+++ b/Marlin/src/HAL/HAL_LINUX/spi_pins.h
@@ -26,7 +26,7 @@
 
 #if HAS_GRAPHICAL_LCD && ENABLED(SDSUPPORT) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN)
   #define LPC_SOFTWARE_SPI  // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
-                            // needed due to the speed and mode requred for communicating with each device being different.
+                            // needed due to the speed and mode required for communicating with each device being different.
                             // This requirement can be removed if the SPI access to these devices is updated to use
                             // spiBeginTransaction.
 #endif
diff --git a/Marlin/src/HAL/HAL_LPC1768/pinsDebug.h b/Marlin/src/HAL/HAL_LPC1768/pinsDebug.h
index 99c4e3805..e39f2d245 100644
--- a/Marlin/src/HAL/HAL_LPC1768/pinsDebug.h
+++ b/Marlin/src/HAL/HAL_LPC1768/pinsDebug.h
@@ -32,7 +32,6 @@
 #define digitalRead_mod(p) extDigitalRead(p)
 #define PRINT_PORT(p)
 #define GET_ARRAY_PIN(p) pin_array[p].pin
-#define NAME_FORMAT(p) PSTR("%-##p##s")
 #define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
 #define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%d.%02d"), LPC1768_PIN_PORT(p), LPC1768_PIN_PIN(p)); SERIAL_ECHO(buffer); }while(0)
 #define MULTI_NAME_PAD 16 // space needed to be pretty if not first name assigned to a pin
diff --git a/Marlin/src/HAL/HAL_LPC1768/spi_pins.h b/Marlin/src/HAL/HAL_LPC1768/spi_pins.h
index 2e17abd31..acf991a9d 100644
--- a/Marlin/src/HAL/HAL_LPC1768/spi_pins.h
+++ b/Marlin/src/HAL/HAL_LPC1768/spi_pins.h
@@ -25,7 +25,7 @@
 
 #if ENABLED(SDSUPPORT) && HAS_GRAPHICAL_LCD && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN)
   #define LPC_SOFTWARE_SPI  // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
-                            // needed due to the speed and mode requred for communicating with each device being different.
+                            // needed due to the speed and mode required for communicating with each device being different.
                             // This requirement can be removed if the SPI access to these devices is updated to use
                             // spiBeginTransaction.
 #endif
diff --git a/Marlin/src/HAL/HAL_STM32/pinsDebug_STM32GENERIC.h b/Marlin/src/HAL/HAL_STM32/pinsDebug_STM32GENERIC.h
index 063eeb665..8281a7a07 100644
--- a/Marlin/src/HAL/HAL_STM32/pinsDebug_STM32GENERIC.h
+++ b/Marlin/src/HAL/HAL_STM32/pinsDebug_STM32GENERIC.h
@@ -42,7 +42,6 @@ extern const stm32_pin_info PIN_MAP[BOARD_NR_GPIO_PINS];
 #define GET_ARRAY_PIN(p) pin_t(pin_array[p].pin)
 #define pwm_status(pin) PWM_PIN(pin)
 #define digitalRead_mod(p) extDigitalRead(p)
-#define NAME_FORMAT(p) PSTR("%-##p##s")
 #define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%3hd "), int16_t(p)); SERIAL_ECHO(buffer); }while(0)
 #define PRINT_PORT(p) print_port(p)
 #define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
diff --git a/Marlin/src/HAL/HAL_STM32/pinsDebug_STM32duino.h b/Marlin/src/HAL/HAL_STM32/pinsDebug_STM32duino.h
index c31f9b009..92d14d027 100644
--- a/Marlin/src/HAL/HAL_STM32/pinsDebug_STM32duino.h
+++ b/Marlin/src/HAL/HAL_STM32/pinsDebug_STM32duino.h
@@ -107,7 +107,6 @@ const XrefInfo pin_xref[] PROGMEM = {
 #define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS
 #define VALID_PIN(ANUM) ((ANUM) >= 0 && (ANUM) < NUMBER_PINS_TOTAL)
 #define digitalRead_mod(Ard_num) extDigitalRead(Ard_num)  // must use Arduino pin numbers when doing reads
-#define NAME_FORMAT(p) PSTR("%-##p##s")
 #define PRINT_PIN(Q)
 #define PRINT_PORT(ANUM) port_print(ANUM)
 #define DIGITAL_PIN_TO_ANALOG_PIN(ANUM) -1  // will report analog pin number in the print port routine
diff --git a/Marlin/src/pins/pinsDebug.h b/Marlin/src/pins/pinsDebug.h
index 61f05c11b..042190777 100644
--- a/Marlin/src/pins/pinsDebug.h
+++ b/Marlin/src/pins/pinsDebug.h
@@ -117,7 +117,7 @@ inline void report_pin_state_extended(pin_t pin, bool ignore, bool extended = fa
     if (GET_ARRAY_PIN(x) == pin) {
       if (found) multi_name_pin = true;
       found = true;
-      if (!multi_name_pin) {    // report digitial and analog pin number only on the first time through
+      if (!multi_name_pin) {    // report digital and analog pin number only on the first time through
         sprintf_P(buffer, PSTR("%sPIN: "), start_string);     // digital pin number
         SERIAL_ECHO(buffer);
         PRINT_PIN(pin);