[2.0.x] G33 MIN_STEPS_PER_SEGMENT (#10386)

This commit is contained in:
Luc Van Daele 2018-04-13 03:22:29 +02:00 committed by Scott Lahteine
parent c96412a78f
commit 12785583d0
11 changed files with 12 additions and 10 deletions

View file

@ -538,7 +538,7 @@
// Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes
#define DELTA_CALIBRATION_RADIUS 73.5 // mm
// Set the steprate for papertest probing
#define PROBE_MANUALLY_STEP (MIN_STEPS_PER_SEGMENT / DEFAULT_XYZ_STEPS_PER_UNIT)
#define PROBE_MANUALLY_STEP 0.05 // mm
#endif
// Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).

View file

@ -538,7 +538,7 @@
// Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes
#define DELTA_CALIBRATION_RADIUS 63 // mm
// Set the steprate for papertest probing
#define PROBE_MANUALLY_STEP (MIN_STEPS_PER_SEGMENT / DEFAULT_XYZ_STEPS_PER_UNIT)
#define PROBE_MANUALLY_STEP 0.05 // mm
#endif
// Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).

View file

@ -538,7 +538,7 @@
// Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes
#define DELTA_CALIBRATION_RADIUS 73.5 // mm
// Set the steprate for papertest probing
#define PROBE_MANUALLY_STEP (MIN_STEPS_PER_SEGMENT / DEFAULT_XYZ_STEPS_PER_UNIT)
#define PROBE_MANUALLY_STEP 0.05 // mm
#endif
// Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).

View file

@ -543,7 +543,7 @@
// Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes
#define DELTA_CALIBRATION_RADIUS 121.5 // mm
// Set the steprate for papertest probing
#define PROBE_MANUALLY_STEP (MIN_STEPS_PER_SEGMENT / DEFAULT_XYZ_STEPS_PER_UNIT)
#define PROBE_MANUALLY_STEP 0.05 // mm
#endif
// Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).

View file

@ -528,7 +528,7 @@
// Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes
#define DELTA_CALIBRATION_RADIUS 121.5 // mm
// Set the steprate for papertest probing
#define PROBE_MANUALLY_STEP (MIN_STEPS_PER_SEGMENT / DEFAULT_XYZ_STEPS_PER_UNIT)
#define PROBE_MANUALLY_STEP 0.05 // mm
#endif
// Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).

View file

@ -528,7 +528,7 @@
// Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes
#define DELTA_CALIBRATION_RADIUS 78.0 // mm
// Set the steprate for papertest probing
#define PROBE_MANUALLY_STEP (MIN_STEPS_PER_SEGMENT / DEFAULT_XYZ_STEPS_PER_UNIT)
#define PROBE_MANUALLY_STEP 0.05 // mm
#endif
// Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).

View file

@ -514,7 +514,7 @@
// Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes
#define DELTA_CALIBRATION_RADIUS 110.0 // mm
// Set the steprate for papertest probing
#define PROBE_MANUALLY_STEP (MIN_STEPS_PER_SEGMENT / DEFAULT_XYZ_STEPS_PER_UNIT)
#define PROBE_MANUALLY_STEP 0.05 // mm
#endif
// Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).

View file

@ -532,7 +532,7 @@
// Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes
#define DELTA_CALIBRATION_RADIUS 121.5 // mm
// Set the steprate for papertest probing
#define PROBE_MANUALLY_STEP (MIN_STEPS_PER_SEGMENT / DEFAULT_XYZ_STEPS_PER_UNIT)
#define PROBE_MANUALLY_STEP 0.05 // mm
#endif
// Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).

View file

@ -181,6 +181,8 @@
#error "MANUAL_PROBE_Z_RANGE is now LCD_PROBE_Z_RANGE. Please update your configuration."
#elif !defined(MIN_STEPS_PER_SEGMENT)
#error Please replace "const int dropsegments" with "#define MIN_STEPS_PER_SEGMENT" (and increase by 1) in Configuration_adv.h.
#elif MIN_STEPS_PER_SEGMENT <= 0
#error "MIN_STEPS_PER_SEGMENT must be at least 1. Please update your Configuration_adv.h."
#elif defined(PREVENT_DANGEROUS_EXTRUDE)
#error "PREVENT_DANGEROUS_EXTRUDE is now PREVENT_COLD_EXTRUSION. Please update your configuration."
#elif defined(SCARA)

View file

@ -2721,7 +2721,7 @@ void kill_screen(const char* lcd_msg) {
do_blocking_move_to_xy(rx, ry);
lcd_synchronize();
move_menu_scale = PROBE_MANUALLY_STEP;
move_menu_scale = max(PROBE_MANUALLY_STEP, MIN_STEPS_PER_SEGMENT / float(DEFAULT_XYZ_STEPS_PER_UNIT));
lcd_goto_screen(lcd_move_z);
}

View file

@ -1354,7 +1354,7 @@ void homeaxis(const AxisEnum axis) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("delta_endstop_adj:");
#endif
do_homing_move(axis, delta_endstop_adj[axis] - MIN_STEPS_PER_SEGMENT / planner.axis_steps_per_mm[axis] * Z_HOME_DIR);
do_homing_move(axis, delta_endstop_adj[axis] - (MIN_STEPS_PER_SEGMENT + 1) * planner.steps_to_mm[axis] * Z_HOME_DIR);
}
#else