Converge all I2C LCD branches (PANELOLU2, VIKI & PCF8575)
This includes refactoring the buttons code to remove a large amount of non-pin dependent duplication from pins.h.
This commit is contained in:
Robert F-C
parent
67710df9f3
commit
1292d735ba
7 changed files with 765 additions and 674 deletions
|
|
@ -306,12 +306,21 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
|
||||||
// please keep turned on if you can.
|
// please keep turned on if you can.
|
||||||
//#define EEPROM_CHITCHAT
|
//#define EEPROM_CHITCHAT
|
||||||
|
|
||||||
|
// Preheat Constants
|
||||||
|
#define PLA_PREHEAT_HOTEND_TEMP 180
|
||||||
|
#define PLA_PREHEAT_HPB_TEMP 70
|
||||||
|
#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
|
||||||
|
|
||||||
|
#define ABS_PREHEAT_HOTEND_TEMP 240
|
||||||
|
#define ABS_PREHEAT_HPB_TEMP 100
|
||||||
|
#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
|
||||||
|
|
||||||
//LCD and SD support
|
//LCD and SD support
|
||||||
//#define ULTRA_LCD //general lcd support, also 16x2
|
//#define ULTRA_LCD //general lcd support, also 16x2
|
||||||
//#define SDSUPPORT // Enable SD Card Support in Hardware Console
|
//#define SDSUPPORT // Enable SD Card Support in Hardware Console
|
||||||
|
|
||||||
//#define ULTIMAKERCONTROLLER //as available from the ultimaker online store.
|
//#define ULTIMAKERCONTROLLER //as available from the ultimaker online store.
|
||||||
//#define ULTIPANEL //the ultipanel as on thingiverse
|
#define ULTIPANEL //the ultipanel as on thingiverse
|
||||||
|
|
||||||
// The RepRapDiscount Smart Controller (white PCB)
|
// The RepRapDiscount Smart Controller (white PCB)
|
||||||
// http://reprap.org/wiki/RepRapDiscount_Smart_Controller
|
// http://reprap.org/wiki/RepRapDiscount_Smart_Controller
|
||||||
|
|
@ -327,15 +336,42 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
|
||||||
#define NEWPANEL
|
#define NEWPANEL
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Preheat Constants
|
// I2C PANELS
|
||||||
#define PLA_PREHEAT_HOTEND_TEMP 180
|
|
||||||
#define PLA_PREHEAT_HPB_TEMP 70
|
|
||||||
#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
|
|
||||||
|
|
||||||
#define ABS_PREHEAT_HOTEND_TEMP 240
|
#define LCD_I2C_SAINSMART_YWROBOT
|
||||||
#define ABS_PREHEAT_HPB_TEMP 100
|
#ifdef LCD_I2C_SAINSMART_YWROBOT
|
||||||
#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
|
// This uses the LiquidCrystal_I2C library ( https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home )
|
||||||
|
// Make sure it is placed in the Arduino libraries directory.
|
||||||
|
#define LCD_I2C_TYPE_PCF8575
|
||||||
|
#define ULTIPANEL
|
||||||
|
#define NEWPANEL
|
||||||
|
#define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// PANELOLU2 LCD with status LEDs, separate encoder and click inputs
|
||||||
|
//#define LCD_I2C_PANELOLU2
|
||||||
|
#ifdef LCD_I2C_PANELOLU2
|
||||||
|
// This uses the LiquidTWI2 library ( https://github.com/lincomatic/LiquidTWI2 ).
|
||||||
|
// Make sure it is placed in the Arduino libraries directory.
|
||||||
|
#define LCD_I2C_TYPE_MCP23017
|
||||||
|
#define ULTIPANEL
|
||||||
|
#define NEWPANEL
|
||||||
|
#define LCD_I2C_ADDRESS 0x20
|
||||||
|
#define LCD_HAS_I2C_BUZZ //comment out to disable buzzer on LCD
|
||||||
|
#define LCD_HAS_STATUS_INDICATORS
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs
|
||||||
|
//#define LCD_I2C_VIKI
|
||||||
|
#ifdef LCD_I2C_VIKI
|
||||||
|
// This uses the LiquidTWI2 library (https://github.com/lincomatic/LiquidTWI2).
|
||||||
|
// Make sure it is placed in the Arduino libraries directory.
|
||||||
|
#define LCD_I2C_TYPE_MCP23017
|
||||||
|
#define ULTIPANEL
|
||||||
|
#define NEWPANEL
|
||||||
|
#define LCD_I2C_ADDRESS 0x20
|
||||||
|
#define LCD_HAS_STATUS_INDICATORS
|
||||||
|
#endif
|
||||||
|
|
||||||
#ifdef ULTIPANEL
|
#ifdef ULTIPANEL
|
||||||
// #define NEWPANEL //enable this if you have a click-encoder panel
|
// #define NEWPANEL //enable this if you have a click-encoder panel
|
||||||
|
|
@ -351,15 +387,6 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
//The LCD is attached via an I2C port expander.
|
|
||||||
//#define LCD_I2C
|
|
||||||
#ifdef LCD_I2C
|
|
||||||
// Port Expander Type - 0=PCF8574 sainsmart/ywrobot
|
|
||||||
#define LCD_I2C_TYPE 0
|
|
||||||
// I2C Address of the port expander
|
|
||||||
#define LCD_I2C_ADDRESS 0x27
|
|
||||||
#endif
|
|
||||||
|
|
||||||
// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino
|
// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino
|
||||||
//#define FAST_PWM_FAN
|
//#define FAST_PWM_FAN
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -36,7 +36,21 @@
|
||||||
#ifdef ULTRA_LCD
|
#ifdef ULTRA_LCD
|
||||||
#ifdef LCD_I2C
|
#ifdef LCD_I2C
|
||||||
#include <Wire.h>
|
#include <Wire.h>
|
||||||
#include <LiquidCrystal_I2C.h>
|
#if defined(LCD_I2C_TYPE_PCF8575)
|
||||||
|
#include <LiquidCrystal_I2C.h>
|
||||||
|
#elif defined(LCD_I2C_TYPE_MCP23017)
|
||||||
|
#ifdef PANELOLU2
|
||||||
|
#undef PANELOLU2
|
||||||
|
#include <LiquidTWI2.h>
|
||||||
|
#ifndef PANELOLU2
|
||||||
|
#error You must uncomment #define PANELOLU2 in LiquidTWI2.h for LiquidTWI2.cpp to compile correctly
|
||||||
|
#endif
|
||||||
|
#else
|
||||||
|
#include <LiquidTWI2.h>
|
||||||
|
#endif
|
||||||
|
#else
|
||||||
|
#error Unknown I2C LCD type
|
||||||
|
#endif
|
||||||
#else
|
#else
|
||||||
#include <LiquidCrystal.h>
|
#include <LiquidCrystal.h>
|
||||||
#endif
|
#endif
|
||||||
|
|
|
||||||
|
|
@ -124,7 +124,7 @@
|
||||||
// M500 - stores paramters in EEPROM
|
// M500 - stores paramters in EEPROM
|
||||||
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
|
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
|
||||||
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
|
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
|
||||||
// M503 - print the current settings (from memory not from eeprom)
|
// M503 - print the current settings (from memory not from eeprom)
|
||||||
// M540 - Use S[0|1] to enable or disable the stop SD card print on endstop hit (requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
|
// M540 - Use S[0|1] to enable or disable the stop SD card print on endstop hit (requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
|
||||||
// M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]
|
// M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]
|
||||||
// M907 - Set digital trimpot motor current using axis codes.
|
// M907 - Set digital trimpot motor current using axis codes.
|
||||||
|
|
@ -853,13 +853,13 @@ void process_commands()
|
||||||
previous_millis_cmd = millis();
|
previous_millis_cmd = millis();
|
||||||
if (codenum > 0){
|
if (codenum > 0){
|
||||||
codenum += millis(); // keep track of when we started waiting
|
codenum += millis(); // keep track of when we started waiting
|
||||||
while(millis() < codenum && !LCD_CLICKED){
|
while(millis() < codenum && !lcd_clicked()){
|
||||||
manage_heater();
|
manage_heater();
|
||||||
manage_inactivity();
|
manage_inactivity();
|
||||||
lcd_update();
|
lcd_update();
|
||||||
}
|
}
|
||||||
}else{
|
}else{
|
||||||
while(!LCD_CLICKED){
|
while(!lcd_clicked()){
|
||||||
manage_heater();
|
manage_heater();
|
||||||
manage_inactivity();
|
manage_inactivity();
|
||||||
lcd_update();
|
lcd_update();
|
||||||
|
|
@ -1499,13 +1499,13 @@ void process_commands()
|
||||||
{
|
{
|
||||||
Config_PrintSettings();
|
Config_PrintSettings();
|
||||||
}
|
}
|
||||||
break;
|
break;
|
||||||
#ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
|
#ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
|
||||||
case 540:
|
case 540:
|
||||||
{
|
{
|
||||||
if(code_seen('S')) abort_on_endstop_hit = code_value() > 0;
|
if(code_seen('S')) abort_on_endstop_hit = code_value() > 0;
|
||||||
}
|
}
|
||||||
break;
|
break;
|
||||||
#endif
|
#endif
|
||||||
#ifdef FILAMENTCHANGEENABLE
|
#ifdef FILAMENTCHANGEENABLE
|
||||||
case 600: //Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]
|
case 600: //Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]
|
||||||
|
|
@ -1592,7 +1592,7 @@ void process_commands()
|
||||||
delay(100);
|
delay(100);
|
||||||
LCD_ALERTMESSAGEPGM(MSG_FILAMENTCHANGE);
|
LCD_ALERTMESSAGEPGM(MSG_FILAMENTCHANGE);
|
||||||
uint8_t cnt=0;
|
uint8_t cnt=0;
|
||||||
while(!LCD_CLICKED){
|
while(!lcd_clicked()){
|
||||||
cnt++;
|
cnt++;
|
||||||
manage_heater();
|
manage_heater();
|
||||||
manage_inactivity();
|
manage_inactivity();
|
||||||
|
|
|
||||||
105
Marlin/pins.h
105
Marlin/pins.h
|
|
@ -290,15 +290,6 @@
|
||||||
#define BTN_EN1 11
|
#define BTN_EN1 11
|
||||||
#define BTN_EN2 10
|
#define BTN_EN2 10
|
||||||
#define BTN_ENC 12 //the click
|
#define BTN_ENC 12 //the click
|
||||||
|
|
||||||
#define BLEN_C 2
|
|
||||||
#define BLEN_B 1
|
|
||||||
#define BLEN_A 0
|
|
||||||
|
|
||||||
#define encrot0 0
|
|
||||||
#define encrot1 2
|
|
||||||
#define encrot2 3
|
|
||||||
#define encrot3 1
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
/****************************************************************************************
|
/****************************************************************************************
|
||||||
|
|
@ -384,16 +375,6 @@
|
||||||
#ifdef ULTRA_LCD
|
#ifdef ULTRA_LCD
|
||||||
|
|
||||||
#ifdef NEWPANEL
|
#ifdef NEWPANEL
|
||||||
//encoder rotation values
|
|
||||||
#define encrot0 0
|
|
||||||
#define encrot1 2
|
|
||||||
#define encrot2 3
|
|
||||||
#define encrot3 1
|
|
||||||
|
|
||||||
#define BLEN_A 0
|
|
||||||
#define BLEN_B 1
|
|
||||||
#define BLEN_C 2
|
|
||||||
|
|
||||||
#define LCD_PINS_RS 16
|
#define LCD_PINS_RS 16
|
||||||
#define LCD_PINS_ENABLE 17
|
#define LCD_PINS_ENABLE 17
|
||||||
#define LCD_PINS_D4 23
|
#define LCD_PINS_D4 23
|
||||||
|
|
@ -427,7 +408,7 @@
|
||||||
|
|
||||||
#else //old style panel with shift register
|
#else //old style panel with shift register
|
||||||
//arduino pin witch triggers an piezzo beeper
|
//arduino pin witch triggers an piezzo beeper
|
||||||
#define BEEPER 33 No Beeper added
|
#define BEEPER 33 // No Beeper added
|
||||||
|
|
||||||
//buttons are attached to a shift register
|
//buttons are attached to a shift register
|
||||||
// Not wired this yet
|
// Not wired this yet
|
||||||
|
|
@ -442,25 +423,6 @@
|
||||||
#define LCD_PINS_D5 25
|
#define LCD_PINS_D5 25
|
||||||
#define LCD_PINS_D6 27
|
#define LCD_PINS_D6 27
|
||||||
#define LCD_PINS_D7 29
|
#define LCD_PINS_D7 29
|
||||||
|
|
||||||
//encoder rotation values
|
|
||||||
#define encrot0 0
|
|
||||||
#define encrot1 2
|
|
||||||
#define encrot2 3
|
|
||||||
#define encrot3 1
|
|
||||||
|
|
||||||
|
|
||||||
//bits in the shift register that carry the buttons for:
|
|
||||||
// left up center down right red
|
|
||||||
#define BL_LE 7
|
|
||||||
#define BL_UP 6
|
|
||||||
#define BL_MI 5
|
|
||||||
#define BL_DW 4
|
|
||||||
#define BL_RI 3
|
|
||||||
#define BL_ST 2
|
|
||||||
|
|
||||||
#define BLEN_B 1
|
|
||||||
#define BLEN_A 0
|
|
||||||
#endif
|
#endif
|
||||||
#endif //ULTRA_LCD
|
#endif //ULTRA_LCD
|
||||||
|
|
||||||
|
|
@ -735,23 +697,12 @@
|
||||||
#define LCD_PINS_D7 27
|
#define LCD_PINS_D7 27
|
||||||
|
|
||||||
//The encoder and click button
|
//The encoder and click button
|
||||||
#define BTN_EN1 11 //must be a hardware interrupt pin
|
#define BTN_EN1 11
|
||||||
#define BTN_EN2 10 //must be hardware interrupt pin
|
#define BTN_EN2 10
|
||||||
#define BTN_ENC 16 //the switch
|
#define BTN_ENC 16 //the switch
|
||||||
//not connected to a pin
|
//not connected to a pin
|
||||||
#define SDCARDDETECT -1
|
#define SDCARDDETECT -1
|
||||||
|
|
||||||
//from the same bit in the RAMPS Newpanel define
|
|
||||||
//encoder rotation values
|
|
||||||
#define encrot0 0
|
|
||||||
#define encrot1 2
|
|
||||||
#define encrot2 3
|
|
||||||
#define encrot3 1
|
|
||||||
|
|
||||||
#define BLEN_C 2
|
|
||||||
#define BLEN_B 1
|
|
||||||
#define BLEN_A 0
|
|
||||||
|
|
||||||
#endif //Newpanel
|
#endif //Newpanel
|
||||||
#endif //Ultipanel
|
#endif //Ultipanel
|
||||||
|
|
||||||
|
|
@ -834,17 +785,8 @@
|
||||||
#define BTN_EN2 42
|
#define BTN_EN2 42
|
||||||
#define BTN_ENC 19 //the click
|
#define BTN_ENC 19 //the click
|
||||||
|
|
||||||
#define BLEN_C 2
|
|
||||||
#define BLEN_B 1
|
|
||||||
#define BLEN_A 0
|
|
||||||
|
|
||||||
#define SDCARDDETECT 38
|
#define SDCARDDETECT 38
|
||||||
|
|
||||||
//encoder rotation values
|
|
||||||
#define encrot0 0
|
|
||||||
#define encrot1 2
|
|
||||||
#define encrot2 3
|
|
||||||
#define encrot3 1
|
|
||||||
#else //old style panel with shift register
|
#else //old style panel with shift register
|
||||||
//arduino pin witch triggers an piezzo beeper
|
//arduino pin witch triggers an piezzo beeper
|
||||||
#define BEEPER 18
|
#define BEEPER 18
|
||||||
|
|
@ -861,33 +803,8 @@
|
||||||
#define LCD_PINS_D5 21
|
#define LCD_PINS_D5 21
|
||||||
#define LCD_PINS_D6 20
|
#define LCD_PINS_D6 20
|
||||||
#define LCD_PINS_D7 19
|
#define LCD_PINS_D7 19
|
||||||
|
|
||||||
//encoder rotation values
|
|
||||||
#ifndef ULTIMAKERCONTROLLER
|
|
||||||
#define encrot0 0
|
|
||||||
#define encrot1 2
|
|
||||||
#define encrot2 3
|
|
||||||
#define encrot3 1
|
|
||||||
#else
|
|
||||||
#define encrot0 0
|
|
||||||
#define encrot1 1
|
|
||||||
#define encrot2 3
|
|
||||||
#define encrot3 2
|
|
||||||
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#define SDCARDDETECT -1
|
#define SDCARDDETECT -1
|
||||||
//bits in the shift register that carry the buttons for:
|
|
||||||
// left up center down right red
|
|
||||||
#define BL_LE 7
|
|
||||||
#define BL_UP 6
|
|
||||||
#define BL_MI 5
|
|
||||||
#define BL_DW 4
|
|
||||||
#define BL_RI 3
|
|
||||||
#define BL_ST 2
|
|
||||||
|
|
||||||
#define BLEN_B 1
|
|
||||||
#define BLEN_A 0
|
|
||||||
#endif
|
#endif
|
||||||
#endif //ULTRA_LCD
|
#endif //ULTRA_LCD
|
||||||
|
|
||||||
|
|
@ -1455,17 +1372,7 @@
|
||||||
#define BTN_EN2 64
|
#define BTN_EN2 64
|
||||||
#define BTN_ENC 43 //the click
|
#define BTN_ENC 43 //the click
|
||||||
|
|
||||||
#define BLEN_C 2
|
|
||||||
#define BLEN_B 1
|
|
||||||
#define BLEN_A 0
|
|
||||||
|
|
||||||
#define SDCARDDETECT -1 // Ramps does not use this port
|
#define SDCARDDETECT -1 // Ramps does not use this port
|
||||||
|
|
||||||
//encoder rotation values
|
|
||||||
#define encrot0 0
|
|
||||||
#define encrot1 2
|
|
||||||
#define encrot2 3
|
|
||||||
#define encrot3 1
|
|
||||||
#endif
|
#endif
|
||||||
#endif //ULTRA_LCD
|
#endif //ULTRA_LCD
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -714,6 +714,10 @@ void lcd_update()
|
||||||
|
|
||||||
lcd_buttons_update();
|
lcd_buttons_update();
|
||||||
|
|
||||||
|
#ifdef LCD_HAS_EXTRA_BUTTONS
|
||||||
|
buttons |= lcd_read_extra_buttons(); // buttons which take too long to read in interrupt context
|
||||||
|
#endif
|
||||||
|
|
||||||
#if (SDCARDDETECT > -1)
|
#if (SDCARDDETECT > -1)
|
||||||
if((IS_SD_INSERTED != lcd_oldcardstatus))
|
if((IS_SD_INSERTED != lcd_oldcardstatus))
|
||||||
{
|
{
|
||||||
|
|
@ -858,6 +862,11 @@ void lcd_buttons_update()
|
||||||
}
|
}
|
||||||
#endif//ULTIPANEL
|
#endif//ULTIPANEL
|
||||||
|
|
||||||
|
bool lcd_clicked()
|
||||||
|
{
|
||||||
|
return LCD_CLICKED;
|
||||||
|
}
|
||||||
|
|
||||||
/********************************/
|
/********************************/
|
||||||
/** Float conversion utilities **/
|
/** Float conversion utilities **/
|
||||||
/********************************/
|
/********************************/
|
||||||
|
|
|
||||||
|
|
@ -20,7 +20,6 @@
|
||||||
|
|
||||||
#ifdef ULTIPANEL
|
#ifdef ULTIPANEL
|
||||||
void lcd_buttons_update();
|
void lcd_buttons_update();
|
||||||
extern volatile uint8_t buttons; //the last checked buttons in a bit array.
|
|
||||||
#else
|
#else
|
||||||
FORCE_INLINE void lcd_buttons_update() {}
|
FORCE_INLINE void lcd_buttons_update() {}
|
||||||
#endif
|
#endif
|
||||||
|
|
@ -33,25 +32,7 @@
|
||||||
extern int absPreheatHPBTemp;
|
extern int absPreheatHPBTemp;
|
||||||
extern int absPreheatFanSpeed;
|
extern int absPreheatFanSpeed;
|
||||||
|
|
||||||
#ifdef NEWPANEL
|
bool lcd_clicked();
|
||||||
#define EN_C (1<<BLEN_C)
|
|
||||||
#define EN_B (1<<BLEN_B)
|
|
||||||
#define EN_A (1<<BLEN_A)
|
|
||||||
|
|
||||||
#define LCD_CLICKED (buttons&EN_C)
|
|
||||||
#else
|
|
||||||
//atomatic, do not change
|
|
||||||
#define B_LE (1<<BL_LE)
|
|
||||||
#define B_UP (1<<BL_UP)
|
|
||||||
#define B_MI (1<<BL_MI)
|
|
||||||
#define B_DW (1<<BL_DW)
|
|
||||||
#define B_RI (1<<BL_RI)
|
|
||||||
#define B_ST (1<<BL_ST)
|
|
||||||
#define EN_B (1<<BLEN_B)
|
|
||||||
#define EN_A (1<<BLEN_A)
|
|
||||||
|
|
||||||
#define LCD_CLICKED ((buttons&B_MI)||(buttons&B_ST))
|
|
||||||
#endif//NEWPANEL
|
|
||||||
|
|
||||||
#else //no lcd
|
#else //no lcd
|
||||||
FORCE_INLINE void lcd_update() {}
|
FORCE_INLINE void lcd_update() {}
|
||||||
|
|
|
||||||
|
|
@ -1,526 +1,679 @@
|
||||||
#ifndef ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H
|
#ifndef ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H
|
||||||
#define ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H
|
#define ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Implementation of the LCD display routines for a hitachi HD44780 display. These are common LCD character displays.
|
* Implementation of the LCD display routines for a hitachi HD44780 display. These are common LCD character displays.
|
||||||
* When selecting the rusian language, a slightly different LCD implementation is used to handle UTF8 characters.
|
* When selecting the rusian language, a slightly different LCD implementation is used to handle UTF8 characters.
|
||||||
**/
|
**/
|
||||||
|
|
||||||
#if LANGUAGE_CHOICE == 6
|
// Declare LCD class to use
|
||||||
#include "LiquidCrystalRus.h"
|
#if defined(LCD_I2C_TYPE_PCF8575)
|
||||||
#define LCD_CLASS LiquidCrystalRus
|
// note: these are virtual pins on the PCF8575 controller not Arduino pins
|
||||||
#else
|
#define LCD_I2C_PIN_BL 3
|
||||||
#ifdef LCD_I2C
|
#define LCD_I2C_PIN_EN 2
|
||||||
#if LCD_I2C_TYPE = 0
|
#define LCD_I2C_PIN_RW 1
|
||||||
#define LCD_I2C_PIN_BL 3
|
#define LCD_I2C_PIN_RS 0
|
||||||
#define LCD_I2C_PIN_EN 2
|
#define LCD_I2C_PIN_D4 4
|
||||||
#define LCD_I2C_PIN_RW 1
|
#define LCD_I2C_PIN_D5 5
|
||||||
#define LCD_I2C_PIN_RS 0
|
#define LCD_I2C_PIN_D6 6
|
||||||
#define LCD_I2C_PIN_D4 4
|
#define LCD_I2C_PIN_D7 7
|
||||||
#define LCD_I2C_PIN_D5 5
|
|
||||||
#define LCD_I2C_PIN_D6 6
|
#include <Wire.h>
|
||||||
#define LCD_I2C_PIN_D7 7
|
#include <LCD.h>
|
||||||
#endif
|
#include <LiquidCrystal_I2C.h>
|
||||||
|
#define LCD_CLASS LiquidCrystal_I2C
|
||||||
#include <Wire.h>
|
LCD_CLASS lcd(LCD_I2C_ADDRESS,LCD_I2C_PIN_EN,LCD_I2C_PIN_RW,LCD_I2C_PIN_RS,LCD_I2C_PIN_D4,LCD_I2C_PIN_D5,LCD_I2C_PIN_D6,LCD_I2C_PIN_D7);
|
||||||
#include <LCD.h>
|
#elif defined(LCD_I2C_TYPE_MCP23017)
|
||||||
#include <LiquidCrystal_I2C.h>
|
//for the LED indicators (which maybe mapped to different things in lcd_implementation_update_indicators())
|
||||||
#define LCD_CLASS LiquidCrystal_I2C
|
#define LED_A 0x04 //100
|
||||||
#else
|
#define LED_B 0x02 //010
|
||||||
#include <LiquidCrystal.h>
|
#define LED_C 0x01 //001
|
||||||
#define LCD_CLASS LiquidCrystal
|
|
||||||
#endif
|
#include <Wire.h>
|
||||||
#endif
|
#include <LiquidTWI2.h>
|
||||||
|
#define LCD_CLASS LiquidTWI2
|
||||||
/* Custom characters defined in the first 8 characters of the LCD */
|
LCD_CLASS lcd(LCD_I2C_ADDRESS); //An alternative I2C master address can be used in place of "0"
|
||||||
#define LCD_STR_BEDTEMP "\x00"
|
#elif defined(LCD_I2C_TYPE_MCP23008)
|
||||||
#define LCD_STR_DEGREE "\x01"
|
#include <Wire.h>
|
||||||
#define LCD_STR_THERMOMETER "\x02"
|
#include <LiquidTWI2.h>
|
||||||
#define LCD_STR_UPLEVEL "\x03"
|
#define LCD_CLASS LiquidTWI2
|
||||||
#define LCD_STR_REFRESH "\x04"
|
LCD_CLASS lcd(LCD_I2C_ADDRESS); //An alternative I2C master address can be used in place of "0"
|
||||||
#define LCD_STR_FOLDER "\x05"
|
#else
|
||||||
#define LCD_STR_FEEDRATE "\x06"
|
#if LANGUAGE_CHOICE == 6
|
||||||
#define LCD_STR_CLOCK "\x07"
|
#include "LiquidCrystalRus.h"
|
||||||
#define LCD_STR_ARROW_RIGHT "\x7E" /* from the default character set */
|
#define LCD_CLASS LiquidCrystalRus
|
||||||
|
#else
|
||||||
#ifdef LCD_I2C
|
#include <LiquidCrystal.h>
|
||||||
LCD_CLASS lcd(LCD_I2C_ADDRESS,LCD_I2C_PIN_EN,LCD_I2C_PIN_RW,LCD_I2C_PIN_RS,LCD_I2C_PIN_D4,LCD_I2C_PIN_D5,LCD_I2C_PIN_D6,LCD_I2C_PIN_D7);
|
#define LCD_CLASS LiquidCrystal
|
||||||
#else
|
#endif
|
||||||
LCD_CLASS lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7); //RS,Enable,D4,D5,D6,D7
|
LCD_CLASS lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7); //RS,Enable,D4,D5,D6,D7
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
static void lcd_implementation_init()
|
extern volatile uint8_t buttons; //the last checked buttons in a bit array.
|
||||||
{
|
|
||||||
byte bedTemp[8] =
|
// provide default button bitmask and encoder definitions (note this is not pin or motherboard specific)
|
||||||
{
|
#ifdef LCD_I2C_VIKI
|
||||||
B00000,
|
//encoder rotation values
|
||||||
B11111,
|
#define encrot0 0
|
||||||
B10101,
|
#define encrot1 2
|
||||||
B10001,
|
#define encrot2 3
|
||||||
B10101,
|
#define encrot3 1
|
||||||
B11111,
|
|
||||||
B00000,
|
#define BLEN_C 2
|
||||||
B00000
|
#define BLEN_B 1
|
||||||
}; //thanks Sonny Mounicou
|
#define BLEN_A 0
|
||||||
byte degree[8] =
|
|
||||||
{
|
#define EN_C (1<<BLEN_C) // The stop/pause/resume button comes through BTN_ENC pin (for consistency with NEWPANEL code)
|
||||||
B01100,
|
#define EN_B (1<<BLEN_B) // The two encoder pins are connected through BTN_EN1 and BTN_EN2
|
||||||
B10010,
|
#define EN_A (1<<BLEN_A)
|
||||||
B10010,
|
|
||||||
B01100,
|
#define B_I2C_BTN_OFFSET 3 // (the first three bit positions reserved for EN_A, EN_B, EN_C)
|
||||||
B00000,
|
|
||||||
B00000,
|
// button and encoder bit positions within 'buttons'
|
||||||
B00000,
|
#define B_ST (EN_C) // The pause/stop/resume button is mapped to EN_C for consistency with NEWPANEL
|
||||||
B00000
|
#define B_LE (BUTTON_LEFT<<B_I2C_BTN_OFFSET) // The remaining buttons are I2C read buttons.
|
||||||
};
|
#define B_UP (BUTTON_UP<<B_I2C_BTN_OFFSET)
|
||||||
byte thermometer[8] =
|
#define B_MI (BUTTON_SELECT<<B_I2C_BTN_OFFSET)
|
||||||
{
|
#define B_DW (BUTTON_DOWN<<B_I2C_BTN_OFFSET)
|
||||||
B00100,
|
#define B_RI (BUTTON_RIGHT<<B_I2C_BTN_OFFSET)
|
||||||
B01010,
|
|
||||||
B01010,
|
#define LCD_CLICKED (buttons&(B_MI|B_RI|B_ST)) // pause/stop button also acts as click until we implement proper pause/stop.
|
||||||
B01010,
|
|
||||||
B01010,
|
// I2C buttons are likely to take too long to read inside interrupt context and so we read them during lcd_update
|
||||||
B10001,
|
#define LCD_HAS_EXTRA_BUTTONS
|
||||||
B10001,
|
|
||||||
B01110
|
#elif defined(NEWPANEL)
|
||||||
};
|
//from the same bit in the RAMPS Newpanel define
|
||||||
byte uplevel[8]={
|
//encoder rotation values
|
||||||
B00100,
|
#define encrot0 0
|
||||||
B01110,
|
#define encrot1 2
|
||||||
B11111,
|
#define encrot2 3
|
||||||
B00100,
|
#define encrot3 1
|
||||||
B11100,
|
|
||||||
B00000,
|
#define BLEN_C 2
|
||||||
B00000,
|
#define BLEN_B 1
|
||||||
B00000
|
#define BLEN_A 0
|
||||||
}; //thanks joris
|
|
||||||
byte refresh[8]={
|
#define EN_C (1<<BLEN_C)
|
||||||
B00000,
|
#define EN_B (1<<BLEN_B)
|
||||||
B00110,
|
#define EN_A (1<<BLEN_A)
|
||||||
B11001,
|
|
||||||
B11000,
|
#define LCD_CLICKED (buttons&EN_C)
|
||||||
B00011,
|
|
||||||
B10011,
|
#else // old style ULTIPANEL
|
||||||
B01100,
|
//encoder rotation values
|
||||||
B00000,
|
#ifndef ULTIMAKERCONTROLLER
|
||||||
}; //thanks joris
|
#define encrot0 0
|
||||||
byte folder [8]={
|
#define encrot1 2
|
||||||
B00000,
|
#define encrot2 3
|
||||||
B11100,
|
#define encrot3 1
|
||||||
B11111,
|
#else
|
||||||
B10001,
|
#define encrot0 0
|
||||||
B10001,
|
#define encrot1 1
|
||||||
B11111,
|
#define encrot2 3
|
||||||
B00000,
|
#define encrot3 2
|
||||||
B00000
|
#endif
|
||||||
}; //thanks joris
|
|
||||||
byte feedrate [8]={
|
//bits in the shift register that carry the buttons for:
|
||||||
B11100,
|
// left up center down right red(stop)
|
||||||
B10000,
|
#define BL_LE 7
|
||||||
B11000,
|
#define BL_UP 6
|
||||||
B10111,
|
#define BL_MI 5
|
||||||
B00101,
|
#define BL_DW 4
|
||||||
B00110,
|
#define BL_RI 3
|
||||||
B00101,
|
#define BL_ST 2
|
||||||
B00000
|
|
||||||
}; //thanks Sonny Mounicou
|
#define BLEN_B 1
|
||||||
byte clock [8]={
|
#define BLEN_A 0
|
||||||
B00000,
|
|
||||||
B01110,
|
//automatic, do not change
|
||||||
B10011,
|
#define B_LE (1<<BL_LE)
|
||||||
B10101,
|
#define B_UP (1<<BL_UP)
|
||||||
B10001,
|
#define B_MI (1<<BL_MI)
|
||||||
B01110,
|
#define B_DW (1<<BL_DW)
|
||||||
B00000,
|
#define B_RI (1<<BL_RI)
|
||||||
B00000
|
#define B_ST (1<<BL_ST)
|
||||||
}; //thanks Sonny Mounicou
|
#define EN_B (1<<BLEN_B)
|
||||||
|
#define EN_A (1<<BLEN_A)
|
||||||
#ifdef LCD_I2C
|
|
||||||
#ifdef LCD_I2C_PIN_BL
|
#define LCD_CLICKED (buttons&(B_MI|B_ST))
|
||||||
lcd.setBacklightPin(LCD_I2C_PIN_BL,POSITIVE);
|
#endif//else NEWPANEL
|
||||||
lcd.setBacklight(HIGH);
|
|
||||||
#endif
|
#ifdef LCD_HAS_STATUS_INDICATORS
|
||||||
#endif
|
//forward declaration
|
||||||
|
static void lcd_implementation_update_indicators();
|
||||||
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
|
#endif
|
||||||
lcd.createChar(LCD_STR_BEDTEMP[0], bedTemp);
|
|
||||||
lcd.createChar(LCD_STR_DEGREE[0], degree);
|
/* Custom characters defined in the first 8 characters of the LCD */
|
||||||
lcd.createChar(LCD_STR_THERMOMETER[0], thermometer);
|
#define LCD_STR_BEDTEMP "\x00"
|
||||||
lcd.createChar(LCD_STR_UPLEVEL[0], uplevel);
|
#define LCD_STR_DEGREE "\x01"
|
||||||
lcd.createChar(LCD_STR_REFRESH[0], refresh);
|
#define LCD_STR_THERMOMETER "\x02"
|
||||||
lcd.createChar(LCD_STR_FOLDER[0], folder);
|
#define LCD_STR_UPLEVEL "\x03"
|
||||||
lcd.createChar(LCD_STR_FEEDRATE[0], feedrate);
|
#define LCD_STR_REFRESH "\x04"
|
||||||
lcd.createChar(LCD_STR_CLOCK[0], clock);
|
#define LCD_STR_FOLDER "\x05"
|
||||||
lcd.clear();
|
#define LCD_STR_FEEDRATE "\x06"
|
||||||
}
|
#define LCD_STR_CLOCK "\x07"
|
||||||
static void lcd_implementation_clear()
|
#define LCD_STR_ARROW_RIGHT "\x7E" /* from the default character set */
|
||||||
{
|
|
||||||
lcd.clear();
|
static void lcd_implementation_init()
|
||||||
}
|
{
|
||||||
/* Arduino < 1.0.0 is missing a function to print PROGMEM strings, so we need to implement our own */
|
byte bedTemp[8] =
|
||||||
static void lcd_printPGM(const char* str)
|
{
|
||||||
{
|
B00000,
|
||||||
char c;
|
B11111,
|
||||||
while((c = pgm_read_byte(str++)) != '\0')
|
B10101,
|
||||||
{
|
B10001,
|
||||||
lcd.write(c);
|
B10101,
|
||||||
}
|
B11111,
|
||||||
}
|
B00000,
|
||||||
/*
|
B00000
|
||||||
Possible status screens:
|
}; //thanks Sonny Mounicou
|
||||||
16x2 |0123456789012345|
|
byte degree[8] =
|
||||||
|000/000 B000/000|
|
{
|
||||||
|Status line.....|
|
B01100,
|
||||||
|
B10010,
|
||||||
16x4 |0123456789012345|
|
B10010,
|
||||||
|000/000 B000/000|
|
B01100,
|
||||||
|SD100% Z000.0|
|
B00000,
|
||||||
|F100% T--:--|
|
B00000,
|
||||||
|Status line.....|
|
B00000,
|
||||||
|
B00000
|
||||||
20x2 |01234567890123456789|
|
};
|
||||||
|T000/000D B000/000D |
|
byte thermometer[8] =
|
||||||
|Status line.........|
|
{
|
||||||
|
B00100,
|
||||||
20x4 |01234567890123456789|
|
B01010,
|
||||||
|T000/000D B000/000D |
|
B01010,
|
||||||
|X+000.0 Y+000.0 Z+000.0|
|
B01010,
|
||||||
|F100% SD100% T--:--|
|
B01010,
|
||||||
|Status line.........|
|
B10001,
|
||||||
|
B10001,
|
||||||
20x4 |01234567890123456789|
|
B01110
|
||||||
|T000/000D B000/000D |
|
};
|
||||||
|T000/000D Z000.0|
|
byte uplevel[8]={
|
||||||
|F100% SD100% T--:--|
|
B00100,
|
||||||
|Status line.........|
|
B01110,
|
||||||
*/
|
B11111,
|
||||||
static void lcd_implementation_status_screen()
|
B00100,
|
||||||
{
|
B11100,
|
||||||
int tHotend=int(degHotend(0) + 0.5);
|
B00000,
|
||||||
int tTarget=int(degTargetHotend(0) + 0.5);
|
B00000,
|
||||||
|
B00000
|
||||||
#if LCD_WIDTH < 20
|
}; //thanks joris
|
||||||
lcd.setCursor(0, 0);
|
byte refresh[8]={
|
||||||
lcd.print(itostr3(tHotend));
|
B00000,
|
||||||
lcd.print('/');
|
B00110,
|
||||||
lcd.print(itostr3left(tTarget));
|
B11001,
|
||||||
|
B11000,
|
||||||
# if EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
|
B00011,
|
||||||
//If we have an 2nd extruder or heated bed, show that in the top right corner
|
B10011,
|
||||||
lcd.setCursor(8, 0);
|
B01100,
|
||||||
# if EXTRUDERS > 1
|
B00000,
|
||||||
tHotend = int(degHotend(1) + 0.5);
|
}; //thanks joris
|
||||||
tTarget = int(degTargetHotend(1) + 0.5);
|
byte folder [8]={
|
||||||
lcd.print(LCD_STR_THERMOMETER[0]);
|
B00000,
|
||||||
# else//Heated bed
|
B11100,
|
||||||
tHotend=int(degBed() + 0.5);
|
B11111,
|
||||||
tTarget=int(degTargetBed() + 0.5);
|
B10001,
|
||||||
lcd.print(LCD_STR_BEDTEMP[0]);
|
B10001,
|
||||||
# endif
|
B11111,
|
||||||
lcd.print(itostr3(tHotend));
|
B00000,
|
||||||
lcd.print('/');
|
B00000
|
||||||
lcd.print(itostr3left(tTarget));
|
}; //thanks joris
|
||||||
# endif//EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
|
byte feedrate [8]={
|
||||||
|
B11100,
|
||||||
#else//LCD_WIDTH > 19
|
B10000,
|
||||||
lcd.setCursor(0, 0);
|
B11000,
|
||||||
lcd.print(LCD_STR_THERMOMETER[0]);
|
B10111,
|
||||||
lcd.print(itostr3(tHotend));
|
B00101,
|
||||||
lcd.print('/');
|
B00110,
|
||||||
lcd.print(itostr3left(tTarget));
|
B00101,
|
||||||
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
|
B00000
|
||||||
if (tTarget < 10)
|
}; //thanks Sonny Mounicou
|
||||||
lcd.print(' ');
|
byte clock [8]={
|
||||||
|
B00000,
|
||||||
# if EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
|
B01110,
|
||||||
//If we have an 2nd extruder or heated bed, show that in the top right corner
|
B10011,
|
||||||
lcd.setCursor(10, 0);
|
B10101,
|
||||||
# if EXTRUDERS > 1
|
B10001,
|
||||||
tHotend = int(degHotend(1) + 0.5);
|
B01110,
|
||||||
tTarget = int(degTargetHotend(1) + 0.5);
|
B00000,
|
||||||
lcd.print(LCD_STR_THERMOMETER[0]);
|
B00000
|
||||||
# else//Heated bed
|
}; //thanks Sonny Mounicou
|
||||||
tHotend=int(degBed() + 0.5);
|
|
||||||
tTarget=int(degTargetBed() + 0.5);
|
#if defined(LCDI2C_TYPE_PCF8575)
|
||||||
lcd.print(LCD_STR_BEDTEMP[0]);
|
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
|
||||||
# endif
|
#ifdef LCD_I2C_PIN_BL
|
||||||
lcd.print(itostr3(tHotend));
|
lcd.setBacklightPin(LCD_I2C_PIN_BL,POSITIVE);
|
||||||
lcd.print('/');
|
lcd.setBacklight(HIGH);
|
||||||
lcd.print(itostr3left(tTarget));
|
#endif
|
||||||
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
|
#elif defined(LCD_I2C_TYPE_MCP23017)
|
||||||
if (tTarget < 10)
|
lcd.setMCPType(LTI_TYPE_MCP23017);
|
||||||
lcd.print(' ');
|
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
|
||||||
# endif//EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
|
lcd.setBacklight(0); //set all the LEDs off to begin with
|
||||||
#endif//LCD_WIDTH > 19
|
#elif defined(LCD_I2C_TYPE_MCP23008)
|
||||||
|
lcd.setMCPType(LTI_TYPE_MCP23008);
|
||||||
#if LCD_HEIGHT > 2
|
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
|
||||||
//Lines 2 for 4 line LCD
|
#else
|
||||||
# if LCD_WIDTH < 20
|
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
|
||||||
# ifdef SDSUPPORT
|
#endif
|
||||||
lcd.setCursor(0, 2);
|
|
||||||
lcd_printPGM(PSTR("SD"));
|
lcd.createChar(LCD_STR_BEDTEMP[0], bedTemp);
|
||||||
if (IS_SD_PRINTING)
|
lcd.createChar(LCD_STR_DEGREE[0], degree);
|
||||||
lcd.print(itostr3(card.percentDone()));
|
lcd.createChar(LCD_STR_THERMOMETER[0], thermometer);
|
||||||
else
|
lcd.createChar(LCD_STR_UPLEVEL[0], uplevel);
|
||||||
lcd_printPGM(PSTR("---"));
|
lcd.createChar(LCD_STR_REFRESH[0], refresh);
|
||||||
lcd.print('%');
|
lcd.createChar(LCD_STR_FOLDER[0], folder);
|
||||||
# endif//SDSUPPORT
|
lcd.createChar(LCD_STR_FEEDRATE[0], feedrate);
|
||||||
# else//LCD_WIDTH > 19
|
lcd.createChar(LCD_STR_CLOCK[0], clock);
|
||||||
# if EXTRUDERS > 1 && TEMP_SENSOR_BED != 0
|
lcd.clear();
|
||||||
//If we both have a 2nd extruder and a heated bed, show the heated bed temp on the 2nd line on the left, as the first line is filled with extruder temps
|
}
|
||||||
tHotend=int(degBed() + 0.5);
|
static void lcd_implementation_clear()
|
||||||
tTarget=int(degTargetBed() + 0.5);
|
{
|
||||||
|
lcd.clear();
|
||||||
lcd.setCursor(0, 1);
|
}
|
||||||
lcd.print(LCD_STR_BEDTEMP[0]);
|
/* Arduino < 1.0.0 is missing a function to print PROGMEM strings, so we need to implement our own */
|
||||||
lcd.print(itostr3(tHotend));
|
static void lcd_printPGM(const char* str)
|
||||||
lcd.print('/');
|
{
|
||||||
lcd.print(itostr3left(tTarget));
|
char c;
|
||||||
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
|
while((c = pgm_read_byte(str++)) != '\0')
|
||||||
if (tTarget < 10)
|
{
|
||||||
lcd.print(' ');
|
lcd.write(c);
|
||||||
# else
|
}
|
||||||
lcd.setCursor(0,1);
|
}
|
||||||
lcd.print('X');
|
/*
|
||||||
lcd.print(ftostr3(current_position[X_AXIS]));
|
Possible status screens:
|
||||||
lcd_printPGM(PSTR(" Y"));
|
16x2 |0123456789012345|
|
||||||
lcd.print(ftostr3(current_position[Y_AXIS]));
|
|000/000 B000/000|
|
||||||
# endif//EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
|
|Status line.....|
|
||||||
# endif//LCD_WIDTH > 19
|
|
||||||
lcd.setCursor(LCD_WIDTH - 8, 1);
|
16x4 |0123456789012345|
|
||||||
lcd.print('Z');
|
|000/000 B000/000|
|
||||||
lcd.print(ftostr32(current_position[Z_AXIS]));
|
|SD100% Z000.0|
|
||||||
#endif//LCD_HEIGHT > 2
|
|F100% T--:--|
|
||||||
|
|Status line.....|
|
||||||
#if LCD_HEIGHT > 3
|
|
||||||
lcd.setCursor(0, 2);
|
20x2 |01234567890123456789|
|
||||||
lcd.print(LCD_STR_FEEDRATE[0]);
|
|T000/000D B000/000D |
|
||||||
lcd.print(itostr3(feedmultiply));
|
|Status line.........|
|
||||||
lcd.print('%');
|
|
||||||
# if LCD_WIDTH > 19
|
20x4 |01234567890123456789|
|
||||||
# ifdef SDSUPPORT
|
|T000/000D B000/000D |
|
||||||
lcd.setCursor(7, 2);
|
|X+000.0 Y+000.0 Z+000.0|
|
||||||
lcd_printPGM(PSTR("SD"));
|
|F100% SD100% T--:--|
|
||||||
if (IS_SD_PRINTING)
|
|Status line.........|
|
||||||
lcd.print(itostr3(card.percentDone()));
|
|
||||||
else
|
20x4 |01234567890123456789|
|
||||||
lcd_printPGM(PSTR("---"));
|
|T000/000D B000/000D |
|
||||||
lcd.print('%');
|
|T000/000D Z000.0|
|
||||||
# endif//SDSUPPORT
|
|F100% SD100% T--:--|
|
||||||
# endif//LCD_WIDTH > 19
|
|Status line.........|
|
||||||
lcd.setCursor(LCD_WIDTH - 6, 2);
|
*/
|
||||||
lcd.print(LCD_STR_CLOCK[0]);
|
static void lcd_implementation_status_screen()
|
||||||
if(starttime != 0)
|
{
|
||||||
{
|
int tHotend=int(degHotend(0) + 0.5);
|
||||||
uint16_t time = millis()/60000 - starttime/60000;
|
int tTarget=int(degTargetHotend(0) + 0.5);
|
||||||
lcd.print(itostr2(time/60));
|
|
||||||
lcd.print(':');
|
#if LCD_WIDTH < 20
|
||||||
lcd.print(itostr2(time%60));
|
lcd.setCursor(0, 0);
|
||||||
}else{
|
lcd.print(itostr3(tHotend));
|
||||||
lcd_printPGM(PSTR("--:--"));
|
lcd.print('/');
|
||||||
}
|
lcd.print(itostr3left(tTarget));
|
||||||
#endif
|
|
||||||
|
# if EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
|
||||||
//Status message line on the last line
|
//If we have an 2nd extruder or heated bed, show that in the top right corner
|
||||||
lcd.setCursor(0, LCD_HEIGHT - 1);
|
lcd.setCursor(8, 0);
|
||||||
lcd.print(lcd_status_message);
|
# if EXTRUDERS > 1
|
||||||
}
|
tHotend = int(degHotend(1) + 0.5);
|
||||||
static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, char pre_char, char post_char)
|
tTarget = int(degTargetHotend(1) + 0.5);
|
||||||
{
|
lcd.print(LCD_STR_THERMOMETER[0]);
|
||||||
char c;
|
# else//Heated bed
|
||||||
//Use all characters in narrow LCDs
|
tHotend=int(degBed() + 0.5);
|
||||||
#if LCD_WIDTH < 20
|
tTarget=int(degTargetBed() + 0.5);
|
||||||
uint8_t n = LCD_WIDTH - 1 - 1;
|
lcd.print(LCD_STR_BEDTEMP[0]);
|
||||||
#else
|
# endif
|
||||||
uint8_t n = LCD_WIDTH - 1 - 2;
|
lcd.print(itostr3(tHotend));
|
||||||
#endif
|
lcd.print('/');
|
||||||
lcd.setCursor(0, row);
|
lcd.print(itostr3left(tTarget));
|
||||||
lcd.print(pre_char);
|
# endif//EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
|
||||||
while((c = pgm_read_byte(pstr)) != '\0')
|
|
||||||
{
|
#else//LCD_WIDTH > 19
|
||||||
lcd.print(c);
|
lcd.setCursor(0, 0);
|
||||||
pstr++;
|
lcd.print(LCD_STR_THERMOMETER[0]);
|
||||||
n--;
|
lcd.print(itostr3(tHotend));
|
||||||
}
|
lcd.print('/');
|
||||||
while(n--)
|
lcd.print(itostr3left(tTarget));
|
||||||
lcd.print(' ');
|
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
|
||||||
lcd.print(post_char);
|
if (tTarget < 10)
|
||||||
lcd.print(' ');
|
lcd.print(' ');
|
||||||
}
|
|
||||||
static void lcd_implementation_drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char pre_char, char* data)
|
# if EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
|
||||||
{
|
//If we have an 2nd extruder or heated bed, show that in the top right corner
|
||||||
char c;
|
lcd.setCursor(10, 0);
|
||||||
//Use all characters in narrow LCDs
|
# if EXTRUDERS > 1
|
||||||
#if LCD_WIDTH < 20
|
tHotend = int(degHotend(1) + 0.5);
|
||||||
uint8_t n = LCD_WIDTH - 1 - 1 - strlen(data);
|
tTarget = int(degTargetHotend(1) + 0.5);
|
||||||
#else
|
lcd.print(LCD_STR_THERMOMETER[0]);
|
||||||
uint8_t n = LCD_WIDTH - 1 - 2 - strlen(data);
|
# else//Heated bed
|
||||||
#endif
|
tHotend=int(degBed() + 0.5);
|
||||||
lcd.setCursor(0, row);
|
tTarget=int(degTargetBed() + 0.5);
|
||||||
lcd.print(pre_char);
|
lcd.print(LCD_STR_BEDTEMP[0]);
|
||||||
while((c = pgm_read_byte(pstr)) != '\0')
|
# endif
|
||||||
{
|
lcd.print(itostr3(tHotend));
|
||||||
lcd.print(c);
|
lcd.print('/');
|
||||||
pstr++;
|
lcd.print(itostr3left(tTarget));
|
||||||
n--;
|
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
|
||||||
}
|
if (tTarget < 10)
|
||||||
lcd.print(':');
|
lcd.print(' ');
|
||||||
while(n--)
|
# endif//EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
|
||||||
lcd.print(' ');
|
#endif//LCD_WIDTH > 19
|
||||||
lcd.print(data);
|
|
||||||
}
|
#if LCD_HEIGHT > 2
|
||||||
static void lcd_implementation_drawmenu_setting_edit_generic_P(uint8_t row, const char* pstr, char pre_char, const char* data)
|
//Lines 2 for 4 line LCD
|
||||||
{
|
# if LCD_WIDTH < 20
|
||||||
char c;
|
# ifdef SDSUPPORT
|
||||||
//Use all characters in narrow LCDs
|
lcd.setCursor(0, 2);
|
||||||
#if LCD_WIDTH < 20
|
lcd_printPGM(PSTR("SD"));
|
||||||
uint8_t n = LCD_WIDTH - 1 - 1 - strlen_P(data);
|
if (IS_SD_PRINTING)
|
||||||
#else
|
lcd.print(itostr3(card.percentDone()));
|
||||||
uint8_t n = LCD_WIDTH - 1 - 2 - strlen_P(data);
|
else
|
||||||
#endif
|
lcd_printPGM(PSTR("---"));
|
||||||
lcd.setCursor(0, row);
|
lcd.print('%');
|
||||||
lcd.print(pre_char);
|
# endif//SDSUPPORT
|
||||||
while((c = pgm_read_byte(pstr)) != '\0')
|
# else//LCD_WIDTH > 19
|
||||||
{
|
# if EXTRUDERS > 1 && TEMP_SENSOR_BED != 0
|
||||||
lcd.print(c);
|
//If we both have a 2nd extruder and a heated bed, show the heated bed temp on the 2nd line on the left, as the first line is filled with extruder temps
|
||||||
pstr++;
|
tHotend=int(degBed() + 0.5);
|
||||||
n--;
|
tTarget=int(degTargetBed() + 0.5);
|
||||||
}
|
|
||||||
lcd.print(':');
|
lcd.setCursor(0, 1);
|
||||||
while(n--)
|
lcd.print(LCD_STR_BEDTEMP[0]);
|
||||||
lcd.print(' ');
|
lcd.print(itostr3(tHotend));
|
||||||
lcd_printPGM(data);
|
lcd.print('/');
|
||||||
}
|
lcd.print(itostr3left(tTarget));
|
||||||
#define lcd_implementation_drawmenu_setting_edit_int3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', itostr3(*(data)))
|
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
|
||||||
#define lcd_implementation_drawmenu_setting_edit_int3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', itostr3(*(data)))
|
if (tTarget < 10)
|
||||||
#define lcd_implementation_drawmenu_setting_edit_float3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr3(*(data)))
|
lcd.print(' ');
|
||||||
#define lcd_implementation_drawmenu_setting_edit_float3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data)))
|
# else
|
||||||
#define lcd_implementation_drawmenu_setting_edit_float32_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data)))
|
lcd.setCursor(0,1);
|
||||||
#define lcd_implementation_drawmenu_setting_edit_float32(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data)))
|
lcd.print('X');
|
||||||
#define lcd_implementation_drawmenu_setting_edit_float5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
|
lcd.print(ftostr3(current_position[X_AXIS]));
|
||||||
#define lcd_implementation_drawmenu_setting_edit_float5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
|
lcd_printPGM(PSTR(" Y"));
|
||||||
#define lcd_implementation_drawmenu_setting_edit_float52_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data)))
|
lcd.print(ftostr3(current_position[Y_AXIS]));
|
||||||
#define lcd_implementation_drawmenu_setting_edit_float52(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr52(*(data)))
|
# endif//EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
|
||||||
#define lcd_implementation_drawmenu_setting_edit_float51_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr51(*(data)))
|
# endif//LCD_WIDTH > 19
|
||||||
#define lcd_implementation_drawmenu_setting_edit_float51(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr51(*(data)))
|
lcd.setCursor(LCD_WIDTH - 8, 1);
|
||||||
#define lcd_implementation_drawmenu_setting_edit_long5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
|
lcd.print('Z');
|
||||||
#define lcd_implementation_drawmenu_setting_edit_long5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
|
lcd.print(ftostr32(current_position[Z_AXIS]));
|
||||||
#define lcd_implementation_drawmenu_setting_edit_bool_selected(row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
#endif//LCD_HEIGHT > 2
|
||||||
#define lcd_implementation_drawmenu_setting_edit_bool(row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
|
||||||
void lcd_implementation_drawedit(const char* pstr, char* value)
|
#if LCD_HEIGHT > 3
|
||||||
{
|
lcd.setCursor(0, 2);
|
||||||
lcd.setCursor(1, 1);
|
lcd.print(LCD_STR_FEEDRATE[0]);
|
||||||
lcd_printPGM(pstr);
|
lcd.print(itostr3(feedmultiply));
|
||||||
lcd.print(':');
|
lcd.print('%');
|
||||||
#if LCD_WIDTH < 20
|
# if LCD_WIDTH > 19
|
||||||
lcd.setCursor(LCD_WIDTH - strlen(value), 1);
|
# ifdef SDSUPPORT
|
||||||
#else
|
lcd.setCursor(7, 2);
|
||||||
lcd.setCursor(LCD_WIDTH -1 - strlen(value), 1);
|
lcd_printPGM(PSTR("SD"));
|
||||||
#endif
|
if (IS_SD_PRINTING)
|
||||||
lcd.print(value);
|
lcd.print(itostr3(card.percentDone()));
|
||||||
}
|
else
|
||||||
static void lcd_implementation_drawmenu_sdfile_selected(uint8_t row, const char* pstr, const char* filename, char* longFilename)
|
lcd_printPGM(PSTR("---"));
|
||||||
{
|
lcd.print('%');
|
||||||
char c;
|
# endif//SDSUPPORT
|
||||||
uint8_t n = LCD_WIDTH - 1;
|
# endif//LCD_WIDTH > 19
|
||||||
lcd.setCursor(0, row);
|
lcd.setCursor(LCD_WIDTH - 6, 2);
|
||||||
lcd.print('>');
|
lcd.print(LCD_STR_CLOCK[0]);
|
||||||
if (longFilename[0] != '\0')
|
if(starttime != 0)
|
||||||
{
|
{
|
||||||
filename = longFilename;
|
uint16_t time = millis()/60000 - starttime/60000;
|
||||||
longFilename[LCD_WIDTH-1] = '\0';
|
lcd.print(itostr2(time/60));
|
||||||
}
|
lcd.print(':');
|
||||||
while((c = *filename) != '\0')
|
lcd.print(itostr2(time%60));
|
||||||
{
|
}else{
|
||||||
lcd.print(c);
|
lcd_printPGM(PSTR("--:--"));
|
||||||
filename++;
|
}
|
||||||
n--;
|
#endif
|
||||||
}
|
|
||||||
while(n--)
|
//Status message line on the last line
|
||||||
lcd.print(' ');
|
lcd.setCursor(0, LCD_HEIGHT - 1);
|
||||||
}
|
lcd.print(lcd_status_message);
|
||||||
static void lcd_implementation_drawmenu_sdfile(uint8_t row, const char* pstr, const char* filename, char* longFilename)
|
#ifdef LCD_HAS_STATUS_INDICATORS
|
||||||
{
|
lcd_implementation_update_indicators();
|
||||||
char c;
|
#endif
|
||||||
uint8_t n = LCD_WIDTH - 1;
|
}
|
||||||
lcd.setCursor(0, row);
|
static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, char pre_char, char post_char)
|
||||||
lcd.print(' ');
|
{
|
||||||
if (longFilename[0] != '\0')
|
char c;
|
||||||
{
|
//Use all characters in narrow LCDs
|
||||||
filename = longFilename;
|
#if LCD_WIDTH < 20
|
||||||
longFilename[LCD_WIDTH-1] = '\0';
|
uint8_t n = LCD_WIDTH - 1 - 1;
|
||||||
}
|
#else
|
||||||
while((c = *filename) != '\0')
|
uint8_t n = LCD_WIDTH - 1 - 2;
|
||||||
{
|
#endif
|
||||||
lcd.print(c);
|
lcd.setCursor(0, row);
|
||||||
filename++;
|
lcd.print(pre_char);
|
||||||
n--;
|
while((c = pgm_read_byte(pstr)) != '\0')
|
||||||
}
|
{
|
||||||
while(n--)
|
lcd.print(c);
|
||||||
lcd.print(' ');
|
pstr++;
|
||||||
}
|
n--;
|
||||||
static void lcd_implementation_drawmenu_sddirectory_selected(uint8_t row, const char* pstr, const char* filename, char* longFilename)
|
}
|
||||||
{
|
while(n--)
|
||||||
char c;
|
lcd.print(' ');
|
||||||
uint8_t n = LCD_WIDTH - 2;
|
lcd.print(post_char);
|
||||||
lcd.setCursor(0, row);
|
lcd.print(' ');
|
||||||
lcd.print('>');
|
}
|
||||||
lcd.print(LCD_STR_FOLDER[0]);
|
static void lcd_implementation_drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char pre_char, char* data)
|
||||||
if (longFilename[0] != '\0')
|
{
|
||||||
{
|
char c;
|
||||||
filename = longFilename;
|
//Use all characters in narrow LCDs
|
||||||
longFilename[LCD_WIDTH-2] = '\0';
|
#if LCD_WIDTH < 20
|
||||||
}
|
uint8_t n = LCD_WIDTH - 1 - 1 - strlen(data);
|
||||||
while((c = *filename) != '\0')
|
#else
|
||||||
{
|
uint8_t n = LCD_WIDTH - 1 - 2 - strlen(data);
|
||||||
lcd.print(c);
|
#endif
|
||||||
filename++;
|
lcd.setCursor(0, row);
|
||||||
n--;
|
lcd.print(pre_char);
|
||||||
}
|
while((c = pgm_read_byte(pstr)) != '\0')
|
||||||
while(n--)
|
{
|
||||||
lcd.print(' ');
|
lcd.print(c);
|
||||||
}
|
pstr++;
|
||||||
static void lcd_implementation_drawmenu_sddirectory(uint8_t row, const char* pstr, const char* filename, char* longFilename)
|
n--;
|
||||||
{
|
}
|
||||||
char c;
|
lcd.print(':');
|
||||||
uint8_t n = LCD_WIDTH - 2;
|
while(n--)
|
||||||
lcd.setCursor(0, row);
|
lcd.print(' ');
|
||||||
lcd.print(' ');
|
lcd.print(data);
|
||||||
lcd.print(LCD_STR_FOLDER[0]);
|
}
|
||||||
if (longFilename[0] != '\0')
|
static void lcd_implementation_drawmenu_setting_edit_generic_P(uint8_t row, const char* pstr, char pre_char, const char* data)
|
||||||
{
|
{
|
||||||
filename = longFilename;
|
char c;
|
||||||
longFilename[LCD_WIDTH-2] = '\0';
|
//Use all characters in narrow LCDs
|
||||||
}
|
#if LCD_WIDTH < 20
|
||||||
while((c = *filename) != '\0')
|
uint8_t n = LCD_WIDTH - 1 - 1 - strlen_P(data);
|
||||||
{
|
#else
|
||||||
lcd.print(c);
|
uint8_t n = LCD_WIDTH - 1 - 2 - strlen_P(data);
|
||||||
filename++;
|
#endif
|
||||||
n--;
|
lcd.setCursor(0, row);
|
||||||
}
|
lcd.print(pre_char);
|
||||||
while(n--)
|
while((c = pgm_read_byte(pstr)) != '\0')
|
||||||
lcd.print(' ');
|
{
|
||||||
}
|
lcd.print(c);
|
||||||
#define lcd_implementation_drawmenu_back_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, LCD_STR_UPLEVEL[0], LCD_STR_UPLEVEL[0])
|
pstr++;
|
||||||
#define lcd_implementation_drawmenu_back(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', LCD_STR_UPLEVEL[0])
|
n--;
|
||||||
#define lcd_implementation_drawmenu_submenu_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', LCD_STR_ARROW_RIGHT[0])
|
}
|
||||||
#define lcd_implementation_drawmenu_submenu(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', LCD_STR_ARROW_RIGHT[0])
|
lcd.print(':');
|
||||||
#define lcd_implementation_drawmenu_gcode_selected(row, pstr, gcode) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
|
while(n--)
|
||||||
#define lcd_implementation_drawmenu_gcode(row, pstr, gcode) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
|
lcd.print(' ');
|
||||||
#define lcd_implementation_drawmenu_function_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
|
lcd_printPGM(data);
|
||||||
#define lcd_implementation_drawmenu_function(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
|
}
|
||||||
|
#define lcd_implementation_drawmenu_setting_edit_int3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', itostr3(*(data)))
|
||||||
static void lcd_implementation_quick_feedback()
|
#define lcd_implementation_drawmenu_setting_edit_int3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', itostr3(*(data)))
|
||||||
{
|
#define lcd_implementation_drawmenu_setting_edit_float3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr3(*(data)))
|
||||||
#if BEEPER > -1
|
#define lcd_implementation_drawmenu_setting_edit_float3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data)))
|
||||||
SET_OUTPUT(BEEPER);
|
#define lcd_implementation_drawmenu_setting_edit_float32_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data)))
|
||||||
for(int8_t i=0;i<10;i++)
|
#define lcd_implementation_drawmenu_setting_edit_float32(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data)))
|
||||||
{
|
#define lcd_implementation_drawmenu_setting_edit_float5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
|
||||||
WRITE(BEEPER,HIGH);
|
#define lcd_implementation_drawmenu_setting_edit_float5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
|
||||||
delay(3);
|
#define lcd_implementation_drawmenu_setting_edit_float52_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data)))
|
||||||
WRITE(BEEPER,LOW);
|
#define lcd_implementation_drawmenu_setting_edit_float52(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr52(*(data)))
|
||||||
delay(3);
|
#define lcd_implementation_drawmenu_setting_edit_float51_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr51(*(data)))
|
||||||
}
|
#define lcd_implementation_drawmenu_setting_edit_float51(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr51(*(data)))
|
||||||
#endif
|
#define lcd_implementation_drawmenu_setting_edit_long5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
|
||||||
}
|
#define lcd_implementation_drawmenu_setting_edit_long5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
|
||||||
#endif//ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H
|
#define lcd_implementation_drawmenu_setting_edit_bool_selected(row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
||||||
|
#define lcd_implementation_drawmenu_setting_edit_bool(row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
||||||
|
void lcd_implementation_drawedit(const char* pstr, char* value)
|
||||||
|
{
|
||||||
|
lcd.setCursor(1, 1);
|
||||||
|
lcd_printPGM(pstr);
|
||||||
|
lcd.print(':');
|
||||||
|
#if LCD_WIDTH < 20
|
||||||
|
lcd.setCursor(LCD_WIDTH - strlen(value), 1);
|
||||||
|
#else
|
||||||
|
lcd.setCursor(LCD_WIDTH -1 - strlen(value), 1);
|
||||||
|
#endif
|
||||||
|
lcd.print(value);
|
||||||
|
}
|
||||||
|
static void lcd_implementation_drawmenu_sdfile_selected(uint8_t row, const char* pstr, const char* filename, char* longFilename)
|
||||||
|
{
|
||||||
|
char c;
|
||||||
|
uint8_t n = LCD_WIDTH - 1;
|
||||||
|
lcd.setCursor(0, row);
|
||||||
|
lcd.print('>');
|
||||||
|
if (longFilename[0] != '\0')
|
||||||
|
{
|
||||||
|
filename = longFilename;
|
||||||
|
longFilename[LCD_WIDTH-1] = '\0';
|
||||||
|
}
|
||||||
|
while((c = *filename) != '\0')
|
||||||
|
{
|
||||||
|
lcd.print(c);
|
||||||
|
filename++;
|
||||||
|
n--;
|
||||||
|
}
|
||||||
|
while(n--)
|
||||||
|
lcd.print(' ');
|
||||||
|
}
|
||||||
|
static void lcd_implementation_drawmenu_sdfile(uint8_t row, const char* pstr, const char* filename, char* longFilename)
|
||||||
|
{
|
||||||
|
char c;
|
||||||
|
uint8_t n = LCD_WIDTH - 1;
|
||||||
|
lcd.setCursor(0, row);
|
||||||
|
lcd.print(' ');
|
||||||
|
if (longFilename[0] != '\0')
|
||||||
|
{
|
||||||
|
filename = longFilename;
|
||||||
|
longFilename[LCD_WIDTH-1] = '\0';
|
||||||
|
}
|
||||||
|
while((c = *filename) != '\0')
|
||||||
|
{
|
||||||
|
lcd.print(c);
|
||||||
|
filename++;
|
||||||
|
n--;
|
||||||
|
}
|
||||||
|
while(n--)
|
||||||
|
lcd.print(' ');
|
||||||
|
}
|
||||||
|
static void lcd_implementation_drawmenu_sddirectory_selected(uint8_t row, const char* pstr, const char* filename, char* longFilename)
|
||||||
|
{
|
||||||
|
char c;
|
||||||
|
uint8_t n = LCD_WIDTH - 2;
|
||||||
|
lcd.setCursor(0, row);
|
||||||
|
lcd.print('>');
|
||||||
|
lcd.print(LCD_STR_FOLDER[0]);
|
||||||
|
if (longFilename[0] != '\0')
|
||||||
|
{
|
||||||
|
filename = longFilename;
|
||||||
|
longFilename[LCD_WIDTH-2] = '\0';
|
||||||
|
}
|
||||||
|
while((c = *filename) != '\0')
|
||||||
|
{
|
||||||
|
lcd.print(c);
|
||||||
|
filename++;
|
||||||
|
n--;
|
||||||
|
}
|
||||||
|
while(n--)
|
||||||
|
lcd.print(' ');
|
||||||
|
}
|
||||||
|
static void lcd_implementation_drawmenu_sddirectory(uint8_t row, const char* pstr, const char* filename, char* longFilename)
|
||||||
|
{
|
||||||
|
char c;
|
||||||
|
uint8_t n = LCD_WIDTH - 2;
|
||||||
|
lcd.setCursor(0, row);
|
||||||
|
lcd.print(' ');
|
||||||
|
lcd.print(LCD_STR_FOLDER[0]);
|
||||||
|
if (longFilename[0] != '\0')
|
||||||
|
{
|
||||||
|
filename = longFilename;
|
||||||
|
longFilename[LCD_WIDTH-2] = '\0';
|
||||||
|
}
|
||||||
|
while((c = *filename) != '\0')
|
||||||
|
{
|
||||||
|
lcd.print(c);
|
||||||
|
filename++;
|
||||||
|
n--;
|
||||||
|
}
|
||||||
|
while(n--)
|
||||||
|
lcd.print(' ');
|
||||||
|
}
|
||||||
|
#define lcd_implementation_drawmenu_back_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, LCD_STR_UPLEVEL[0], LCD_STR_UPLEVEL[0])
|
||||||
|
#define lcd_implementation_drawmenu_back(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', LCD_STR_UPLEVEL[0])
|
||||||
|
#define lcd_implementation_drawmenu_submenu_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', LCD_STR_ARROW_RIGHT[0])
|
||||||
|
#define lcd_implementation_drawmenu_submenu(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', LCD_STR_ARROW_RIGHT[0])
|
||||||
|
#define lcd_implementation_drawmenu_gcode_selected(row, pstr, gcode) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
|
||||||
|
#define lcd_implementation_drawmenu_gcode(row, pstr, gcode) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
|
||||||
|
#define lcd_implementation_drawmenu_function_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
|
||||||
|
#define lcd_implementation_drawmenu_function(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
|
||||||
|
|
||||||
|
static void lcd_implementation_quick_feedback()
|
||||||
|
{
|
||||||
|
#ifdef LCD_HAS_I2C_BUZZ
|
||||||
|
lcd.buzz(300,4000);
|
||||||
|
#elif defined(BEEPER) && BEEPER > -1
|
||||||
|
SET_OUTPUT(BEEPER);
|
||||||
|
for(int8_t i=0;i<10;i++)
|
||||||
|
{
|
||||||
|
WRITE(BEEPER,HIGH);
|
||||||
|
delay(3);
|
||||||
|
WRITE(BEEPER,LOW);
|
||||||
|
delay(3);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifdef LCD_HAS_STATUS_INDICATORS
|
||||||
|
static void lcd_implementation_update_indicators()
|
||||||
|
{
|
||||||
|
#if defined(LCD_I2C_PANELOLU2) || defined(LCD_I2C_VIKI)
|
||||||
|
//set the LEDS - referred to as backlights by the LiquidTWI2 library
|
||||||
|
static uint8_t ledsprev = 0;
|
||||||
|
uint8_t leds = 0;
|
||||||
|
if (isHeatingBed()) leds |= LED_A;
|
||||||
|
if (isHeatingHotend(0)) leds |= LED_B;
|
||||||
|
if (fanSpeed) leds |= LED_C;
|
||||||
|
#if EXTRUDERS > 1
|
||||||
|
if (isHeatingHotend(1)) leds |= LED_C;
|
||||||
|
#endif
|
||||||
|
if (leds != ledsprev) {
|
||||||
|
lcd.setBacklight(leds);
|
||||||
|
ledsprev = leds;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef LCD_HAS_EXTRA_BUTTONS
|
||||||
|
static uint8_t lcd_read_extra_buttons()
|
||||||
|
{
|
||||||
|
#ifdef LCD_I2C_TYPE_MCP23017
|
||||||
|
// the I2C button bit positions are shifted by three bits from the native LiquidTWI2 position
|
||||||
|
// this is potentially too slow to call inside interrupt context
|
||||||
|
return lcd.readButtons() << B_I2C_BTN_OFFSET;
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif//ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H
|
||||||
|
|
|
||||||
Reference in a new issue