Fix UBL mesh editor on delta (#13478)

This commit is contained in:
Thomas Moore 2019-03-25 23:04:57 -04:00 committed by Scott Lahteine
parent d2e0c03afb
commit 13a12f8a87

View file

@ -431,9 +431,21 @@ void _lcd_ubl_map_lcd_edit_cmd() {
* UBL LCD Map Movement
*/
void ubl_map_move_to_xy() {
current_position[X_AXIS] = pgm_read_float(&ubl._mesh_index_to_xpos[x_plot]);
current_position[Y_AXIS] = pgm_read_float(&ubl._mesh_index_to_ypos[y_plot]);
planner.buffer_line(current_position, MMM_TO_MMS(XY_PROBE_SPEED), active_extruder);
REMEMBER(fr, feedrate_mm_s, MMM_TO_MMS(XY_PROBE_SPEED));
set_destination_from_current(); // sync destination at the start
#if ENABLED(DELTA)
if (current_position[Z_AXIS] > delta_clip_start_height) {
destination[Z_AXIS] = delta_clip_start_height;
prepare_move_to_destination();
}
#endif
destination[X_AXIS] = pgm_read_float(&ubl._mesh_index_to_xpos[x_plot]);
destination[Y_AXIS] = pgm_read_float(&ubl._mesh_index_to_ypos[y_plot]);
prepare_move_to_destination();
}
/**
@ -461,22 +473,33 @@ void _lcd_ubl_output_map_lcd() {
if (ui.encoderPosition) {
step_scaler += (int32_t)ui.encoderPosition;
x_plot += step_scaler / (ENCODER_STEPS_PER_MENU_ITEM);
if (ABS(step_scaler) >= ENCODER_STEPS_PER_MENU_ITEM) step_scaler = 0;
ui.encoderPosition = 0;
ui.refresh(LCDVIEW_REDRAW_NOW);
}
#if IS_KINEMATIC
#define KEEP_LOOPING true // Loop until a valid point is found
#else
#define KEEP_LOOPING false
#endif
do {
// Encoder to the right (++)
if (x_plot >= GRID_MAX_POINTS_X) { x_plot = 0; y_plot++; }
if (y_plot >= GRID_MAX_POINTS_Y) y_plot = 0;
// Encoder to the left (--)
if (x_plot <= GRID_MAX_POINTS_X - (GRID_MAX_POINTS_X + 1)) { x_plot = GRID_MAX_POINTS_X - 1; y_plot--; }
if (y_plot <= GRID_MAX_POINTS_Y - (GRID_MAX_POINTS_Y + 1)) y_plot = GRID_MAX_POINTS_Y - 1;
if (x_plot < 0) { x_plot = GRID_MAX_POINTS_X - 1; y_plot--; }
if (y_plot < 0) y_plot = GRID_MAX_POINTS_Y - 1;
// Prevent underrun/overrun of plot numbers
x_plot = constrain(x_plot, GRID_MAX_POINTS_X - (GRID_MAX_POINTS_X + 1), GRID_MAX_POINTS_X + 1);
y_plot = constrain(y_plot, GRID_MAX_POINTS_Y - (GRID_MAX_POINTS_Y + 1), GRID_MAX_POINTS_Y + 1);
#if IS_KINEMATIC
const float x = pgm_read_float(&ubl._mesh_index_to_xpos[x_plot]),
y = pgm_read_float(&ubl._mesh_index_to_ypos[y_plot]);
if (position_is_reachable(x, y)) break; // Found a valid point
x_plot += (step_scaler < 0) ? -1 : 1;
#endif
} while(KEEP_LOOPING);
// Determine number of points to edit
#if IS_KINEMATIC
@ -487,6 +510,9 @@ void _lcd_ubl_output_map_lcd() {
n_edit_pts = yc ? (xc ? 9 : 6) : (xc ? 6 : 4); // Corners
#endif
// Cleanup
if (ABS(step_scaler) >= ENCODER_STEPS_PER_MENU_ITEM) step_scaler = 0;
if (ui.should_draw()) {
ui.ubl_plot(x_plot, y_plot);