diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index dff0a4b77..a71139594 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -461,6 +461,7 @@
 #define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current
 #define PID_K1 0.95      // Smoothing factor within any PID loop
 #if ENABLED(PIDTEMP)
+  //#define MIN_POWER 0
   //#define PID_EDIT_MENU         // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM)
   //#define PID_AUTOTUNE_MENU     // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM)
   //#define PID_DEBUG             // Sends debug data to the serial port.
@@ -520,7 +521,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h
index 7728d1c5b..8efd38bcf 100644
--- a/Marlin/src/inc/Conditionals_post.h
+++ b/Marlin/src/inc/Conditionals_post.h
@@ -1153,10 +1153,17 @@
   #define WRITE_HEATER_0(v) WRITE_HEATER_0P(v)
 #endif
 
+#ifndef MIN_POWER
+  #define MIN_POWER 0
+#endif
+
 /**
  * Heated bed requires settings
  */
 #if HAS_HEATED_BED
+  #ifndef MIN_BED_POWER
+    #define MIN_BED_POWER 0
+  #endif
   #ifndef MAX_BED_POWER
     #define MAX_BED_POWER 255
   #endif
diff --git a/Marlin/src/module/temperature.cpp b/Marlin/src/module/temperature.cpp
index a5736dc29..72e49dc06 100644
--- a/Marlin/src/module/temperature.cpp
+++ b/Marlin/src/module/temperature.cpp
@@ -469,12 +469,23 @@ temp_range_t Temperature::temp_range[HOTENDS] = ARRAY_BY_HOTENDS(sensor_heater_0
                             Tu = float(t_low + t_high) * 0.001f,
                             pf = isbed ? 0.2f : 0.6f,
                             df = isbed ? 1.0f / 3.0f : 1.0f / 8.0f;
-                tune_pid.Kp = Ku * pf;
-                tune_pid.Kd = tune_pid.Kp * Tu * df;
-                tune_pid.Ki = 2 * tune_pid.Kp / Tu;
+
                 SERIAL_ECHOPAIR(MSG_KU, Ku, MSG_TU, Tu);
-                SERIAL_ECHOLNPGM("\n" MSG_CLASSIC_PID);
-                SERIAL_ECHOLNPAIR(MSG_KP, tune_pid.Kp, MSG_KI, tune_pid.Ki, MSG_KD, tune_pid.Kd);
+                if (isbed) { // Do not remove this otherwise PID autotune won't work right for the bed!
+                  tune_pid.Kp = Ku * 0.2f;
+                  tune_pid.Ki = 2 * tune_pid.Kp / Tu;
+                  tune_pid.Kd = tune_pid.Kp * Tu / 3;
+                  SERIAL_ECHOLNPGM("\n" " No overshoot"); // Works far better for the bed. Classic and some have bad ringing.
+                  SERIAL_ECHOLNPAIR(MSG_KP, tune_pid.Kp, MSG_KI, tune_pid.Ki, MSG_KD, tune_pid.Kd);
+                }
+                else {
+                  tune_pid.Kp = Ku * pf;
+                  tune_pid.Kd = tune_pid.Kp * Tu * df;
+                  tune_pid.Ki = 2 * tune_pid.Kp / Tu;
+                  SERIAL_ECHOLNPGM("\n" MSG_CLASSIC_PID);
+                  SERIAL_ECHOLNPAIR(MSG_KP, tune_pid.Kp, MSG_KI, tune_pid.Ki, MSG_KD, tune_pid.Kd);
+                }
+
                 /**
                 tune_pid.Kp = 0.33 * Ku;
                 tune_pid.Ki = tune_pid.Kp / Tu;
@@ -850,12 +861,12 @@ float Temperature::get_pid_output_hotend(const uint8_t e) {
         }
 
         work_pid[ee].Kd = work_pid[ee].Kd + PID_K2 * (PID_PARAM(Kd, ee) * (temp_dState[ee] - temp_hotend[ee].current) - work_pid[ee].Kd);
-        const float max_power_over_i_gain = (float)PID_MAX / PID_PARAM(Ki, ee);
+        const float max_power_over_i_gain = float(PID_MAX) / PID_PARAM(Ki, ee) - float(MIN_POWER);
         temp_iState[ee] = constrain(temp_iState[ee] + pid_error, 0, max_power_over_i_gain);
         work_pid[ee].Kp = PID_PARAM(Kp, ee) * pid_error;
         work_pid[ee].Ki = PID_PARAM(Ki, ee) * temp_iState[ee];
 
-        pid_output = work_pid[ee].Kp + work_pid[ee].Ki + work_pid[ee].Kd;
+        pid_output = work_pid[ee].Kp + work_pid[ee].Ki + work_pid[ee].Kd + float(MIN_POWER);
 
         #if ENABLED(PID_EXTRUSION_SCALING)
           work_pid[ee].Kc = 0;
@@ -885,23 +896,25 @@ float Temperature::get_pid_output_hotend(const uint8_t e) {
     #endif // PID_OPENLOOP
 
     #if ENABLED(PID_DEBUG)
-      SERIAL_ECHO_START();
-      SERIAL_ECHOPAIR(
-        MSG_PID_DEBUG, ee,
-        MSG_PID_DEBUG_INPUT, temp_hotend[ee].current,
-        MSG_PID_DEBUG_OUTPUT, pid_output
-      );
-      #if DISABLED(PID_OPENLOOP)
+      if (e == active_extruder) {
+        SERIAL_ECHO_START();
         SERIAL_ECHOPAIR(
-          MSG_PID_DEBUG_PTERM, work_pid[ee].Kp,
-          MSG_PID_DEBUG_ITERM, work_pid[ee].Ki,
-          MSG_PID_DEBUG_DTERM, work_pid[ee].Kd
-          #if ENABLED(PID_EXTRUSION_SCALING)
-            , MSG_PID_DEBUG_CTERM, work_pid[ee].Kc
-          #endif
+          MSG_PID_DEBUG, ee,
+          MSG_PID_DEBUG_INPUT, temp_hotend[ee].current,
+          MSG_PID_DEBUG_OUTPUT, pid_output
         );
-      #endif
-      SERIAL_EOL();
+        #if DISABLED(PID_OPENLOOP)
+          SERIAL_ECHOPAIR(
+            MSG_PID_DEBUG_PTERM, work_pid[ee].Kp,
+            MSG_PID_DEBUG_ITERM, work_pid[ee].Ki,
+            MSG_PID_DEBUG_DTERM, work_pid[ee].Kd
+            #if ENABLED(PID_EXTRUSION_SCALING)
+              , MSG_PID_DEBUG_CTERM, work_pid[ee].Kc
+            #endif
+          );
+        #endif
+        SERIAL_EOL();
+      }
     #endif // PID_DEBUG
 
   #else // No PID enabled
@@ -927,19 +940,36 @@ float Temperature::get_pid_output_hotend(const uint8_t e) {
 
       static PID_t work_pid = { 0 };
       static float temp_iState = 0, temp_dState = 0;
-
-      const float max_power_over_i_gain = (float)MAX_BED_POWER / temp_bed.pid.Ki,
+      static bool pid_reset = true;
+      float pid_output = 0;
+      const float max_power_over_i_gain = float(MAX_BED_POWER) / temp_bed.pid.Ki - float(MIN_BED_POWER),
                   pid_error = temp_bed.target - temp_bed.current;
 
-      temp_iState = constrain(temp_iState + pid_error, 0, max_power_over_i_gain);
+      if (!temp_bed.target || pid_error < -(PID_FUNCTIONAL_RANGE)) {
+        pid_output = 0;
+        pid_reset = true;
+      }
+      else if (pid_error > PID_FUNCTIONAL_RANGE) {
+        pid_output = BANG_MAX;
+        pid_reset = true;
+      }
+      else {
+        if (pid_reset) {
+          temp_iState = 0.0;
+          work_pid.Kd = 0.0;
+          pid_reset = false;
+        }
 
-      work_pid.Kp = temp_bed.pid.Kp * pid_error;
-      work_pid.Ki = temp_bed.pid.Ki * temp_iState;
-      work_pid.Kd = work_pid.Kd + PID_K2 * (temp_bed.pid.Kd * (temp_dState - temp_bed.current) - work_pid.Kd);
+        temp_iState = constrain(temp_iState + pid_error, 0, max_power_over_i_gain);
 
-      temp_dState = temp_bed.current;
+        work_pid.Kp = temp_bed.pid.Kp * pid_error;
+        work_pid.Ki = temp_bed.pid.Ki * temp_iState;
+        work_pid.Kd = work_pid.Kd + PID_K2 * (temp_bed.pid.Kd * (temp_dState - temp_bed.current) - work_pid.Kd);
 
-      const float pid_output = constrain(work_pid.Kp + work_pid.Ki + work_pid.Kd, 0, MAX_BED_POWER);
+        temp_dState = temp_bed.current;
+
+        pid_output = constrain(work_pid.Kp + work_pid.Ki + work_pid.Kd + float(MIN_BED_POWER), 0, MAX_BED_POWER);
+      }
 
     #else // PID_OPENLOOP
 
diff --git a/config/default/Configuration.h b/config/default/Configuration.h
index dff0a4b77..6c3488261 100644
--- a/config/default/Configuration.h
+++ b/config/default/Configuration.h
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h
index bf4304ed2..a2245f278 100644
--- a/config/examples/3DFabXYZ/Migbot/Configuration.h
+++ b/config/examples/3DFabXYZ/Migbot/Configuration.h
@@ -525,7 +525,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/AlephObjects/TAZ4/Configuration.h b/config/examples/AlephObjects/TAZ4/Configuration.h
index 939e64954..4e55e9af8 100644
--- a/config/examples/AlephObjects/TAZ4/Configuration.h
+++ b/config/examples/AlephObjects/TAZ4/Configuration.h
@@ -529,7 +529,7 @@
 #define MAX_BED_POWER 206 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //24V 360W silicone heater from NPH on 3mm borosilicate (TAZ 2.2+)
diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h
index e654ef3f1..b1bc645a1 100644
--- a/config/examples/Alfawise/U20/Configuration.h
+++ b/config/examples/Alfawise/U20/Configuration.h
@@ -575,7 +575,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h
index 02e4c7fb1..522febf84 100644
--- a/config/examples/AliExpress/CL-260/Configuration.h
+++ b/config/examples/AliExpress/CL-260/Configuration.h
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h
index d03aad52b..1f6425699 100644
--- a/config/examples/AliExpress/UM2pExt/Configuration.h
+++ b/config/examples/AliExpress/UM2pExt/Configuration.h
@@ -531,7 +531,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h
index 784f1a20e..a820a250b 100644
--- a/config/examples/Anet/A2/Configuration.h
+++ b/config/examples/Anet/A2/Configuration.h
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h
index f1263b90b..c2eb82237 100644
--- a/config/examples/Anet/A2plus/Configuration.h
+++ b/config/examples/Anet/A2plus/Configuration.h
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h
index 197afdf68..c74c2ab14 100644
--- a/config/examples/Anet/A6/Configuration.h
+++ b/config/examples/Anet/A6/Configuration.h
@@ -531,7 +531,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h
index a29d67b8d..f0d4ad649 100644
--- a/config/examples/Anet/A8/Configuration.h
+++ b/config/examples/Anet/A8/Configuration.h
@@ -527,7 +527,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h
index 02db1dce9..34bc27e1f 100644
--- a/config/examples/Anet/A8plus/Configuration.h
+++ b/config/examples/Anet/A8plus/Configuration.h
@@ -526,7 +526,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Anet/E16/Configuration.h b/config/examples/Anet/E16/Configuration.h
index 2c5391a07..269108ece 100644
--- a/config/examples/Anet/E16/Configuration.h
+++ b/config/examples/Anet/E16/Configuration.h
@@ -526,7 +526,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h
index ed3e12dde..5e37a44fc 100644
--- a/config/examples/AnyCubic/i3/Configuration.h
+++ b/config/examples/AnyCubic/i3/Configuration.h
@@ -525,7 +525,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h
index 41589b27d..0b267b51b 100644
--- a/config/examples/ArmEd/Configuration.h
+++ b/config/examples/ArmEd/Configuration.h
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h
index 26c77b517..827f95c28 100644
--- a/config/examples/Azteeg/X5GT/Configuration.h
+++ b/config/examples/Azteeg/X5GT/Configuration.h
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h
index 831664848..5a10322c0 100644
--- a/config/examples/BIBO/TouchX/cyclops/Configuration.h
+++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h
index 216e48e73..137f729fe 100644
--- a/config/examples/BIBO/TouchX/default/Configuration.h
+++ b/config/examples/BIBO/TouchX/default/Configuration.h
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h
index 5164a8e0d..4517364aa 100644
--- a/config/examples/BQ/Hephestos/Configuration.h
+++ b/config/examples/BQ/Hephestos/Configuration.h
@@ -508,7 +508,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h
index 92b2d9c43..cd4b24221 100644
--- a/config/examples/BQ/Hephestos_2/Configuration.h
+++ b/config/examples/BQ/Hephestos_2/Configuration.h
@@ -521,7 +521,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h
index 49a99e491..a1a5a1e45 100644
--- a/config/examples/BQ/WITBOX/Configuration.h
+++ b/config/examples/BQ/WITBOX/Configuration.h
@@ -508,7 +508,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h
index f5e7475a3..445144c4a 100644
--- a/config/examples/Cartesio/Configuration.h
+++ b/config/examples/Cartesio/Configuration.h
@@ -521,7 +521,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
     //24V 500W silicone heater on to 4mm glass CartesioW
diff --git a/config/examples/Creality/CR-10/Configuration.h b/config/examples/Creality/CR-10/Configuration.h
index 4e6bce954..57f2ca214 100644
--- a/config/examples/Creality/CR-10/Configuration.h
+++ b/config/examples/Creality/CR-10/Configuration.h
@@ -525,7 +525,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //Stock CR-10 Bed Tuned for 70C
diff --git a/config/examples/Creality/CR-10S/Configuration.h b/config/examples/Creality/CR-10S/Configuration.h
index d35317548..bf6f2745b 100644
--- a/config/examples/Creality/CR-10S/Configuration.h
+++ b/config/examples/Creality/CR-10S/Configuration.h
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Creality/CR-10_5S/Configuration.h b/config/examples/Creality/CR-10_5S/Configuration.h
index e046a3c06..51ed51c46 100644
--- a/config/examples/Creality/CR-10_5S/Configuration.h
+++ b/config/examples/Creality/CR-10_5S/Configuration.h
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Creality/CR-10mini/Configuration.h b/config/examples/Creality/CR-10mini/Configuration.h
index a44a238a9..08d75c790 100644
--- a/config/examples/Creality/CR-10mini/Configuration.h
+++ b/config/examples/Creality/CR-10mini/Configuration.h
@@ -534,7 +534,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //Stock CR-10 Bed Tuned for 70C
diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h
index a39394175..fc1ff91fd 100644
--- a/config/examples/Creality/CR-20 Pro/Configuration.h	
+++ b/config/examples/Creality/CR-20 Pro/Configuration.h	
@@ -524,7 +524,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Creality/CR-20/Configuration.h b/config/examples/Creality/CR-20/Configuration.h
index 8ce20023d..ff0c0699e 100644
--- a/config/examples/Creality/CR-20/Configuration.h
+++ b/config/examples/Creality/CR-20/Configuration.h
@@ -524,7 +524,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h
index 10f5e4ff0..f4b81fe44 100644
--- a/config/examples/Creality/CR-8/Configuration.h
+++ b/config/examples/Creality/CR-8/Configuration.h
@@ -525,7 +525,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   // Ender-4
diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h
index 9733a6b68..1369760d6 100644
--- a/config/examples/Creality/Ender-2/Configuration.h
+++ b/config/examples/Creality/Ender-2/Configuration.h
@@ -524,7 +524,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Creality/Ender-3/Configuration.h b/config/examples/Creality/Ender-3/Configuration.h
index 76169c102..43810865c 100644
--- a/config/examples/Creality/Ender-3/Configuration.h
+++ b/config/examples/Creality/Ender-3/Configuration.h
@@ -524,7 +524,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h
index 2eb00432b..39b3b7649 100644
--- a/config/examples/Creality/Ender-4/Configuration.h
+++ b/config/examples/Creality/Ender-4/Configuration.h
@@ -525,7 +525,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   // Ender-4
diff --git a/config/examples/Creality/Ender-5/Configuration.h b/config/examples/Creality/Ender-5/Configuration.h
index 10f7cbd79..696650c47 100644
--- a/config/examples/Creality/Ender-5/Configuration.h
+++ b/config/examples/Creality/Ender-5/Configuration.h
@@ -524,7 +524,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h
index db62ae1cd..813d4bbe2 100644
--- a/config/examples/Dagoma/Disco Ultimate/Configuration.h	
+++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h	
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h
index 8f3733dfd..327015a77 100755
--- a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h	
+++ b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h	
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   // Sidewinder X1
diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h
index 9d19589d8..b9c252d7d 100644
--- a/config/examples/Einstart-S/Configuration.h
+++ b/config/examples/Einstart-S/Configuration.h
@@ -526,7 +526,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/FYSETC/AIO_II/Configuration.h b/config/examples/FYSETC/AIO_II/Configuration.h
index 8123d8c2c..18aa9b963 100644
--- a/config/examples/FYSETC/AIO_II/Configuration.h
+++ b/config/examples/FYSETC/AIO_II/Configuration.h
@@ -525,7 +525,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h
index bd484ad49..c281154f1 100644
--- a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h	
+++ b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h	
@@ -526,7 +526,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h b/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h
index e71ca0c50..a7ef00cce 100644
--- a/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h	
+++ b/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h	
@@ -525,7 +525,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h b/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h
index ffb3463b4..b980f3c69 100644
--- a/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h
+++ b/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/FYSETC/Cheetah/base/Configuration.h b/config/examples/FYSETC/Cheetah/base/Configuration.h
index af101952a..be504b915 100644
--- a/config/examples/FYSETC/Cheetah/base/Configuration.h
+++ b/config/examples/FYSETC/Cheetah/base/Configuration.h
@@ -525,7 +525,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/FYSETC/F6_13/Configuration.h b/config/examples/FYSETC/F6_13/Configuration.h
index 7da0f3411..eeb789a3e 100644
--- a/config/examples/FYSETC/F6_13/Configuration.h
+++ b/config/examples/FYSETC/F6_13/Configuration.h
@@ -522,7 +522,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Felix/Configuration.h b/config/examples/Felix/Configuration.h
index b5b3fae89..b08b3ce26 100644
--- a/config/examples/Felix/Configuration.h
+++ b/config/examples/Felix/Configuration.h
@@ -508,7 +508,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   // Felix Foil Heater
diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h
index d47fb98f3..e5df72ae4 100644
--- a/config/examples/Felix/DUAL/Configuration.h
+++ b/config/examples/Felix/DUAL/Configuration.h
@@ -508,7 +508,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   // Felix Foil Heater
diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h
index ca2657407..6ea444bf0 100644
--- a/config/examples/FlashForge/CreatorPro/Configuration.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration.h
@@ -510,7 +510,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h
index f046f4e32..22c9f9cbd 100644
--- a/config/examples/FolgerTech/i3-2020/Configuration.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration.h
@@ -525,7 +525,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h
index d6209389b..7372250c2 100644
--- a/config/examples/Formbot/Raptor/Configuration.h
+++ b/config/examples/Formbot/Raptor/Configuration.h
@@ -572,7 +572,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h
index 1446a0e6b..bed919419 100644
--- a/config/examples/Formbot/T_Rex_2+/Configuration.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration.h
@@ -542,7 +542,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   #ifdef ROXYs_TRex
diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h
index c9035bbdf..fb0b26bac 100644
--- a/config/examples/Formbot/T_Rex_3/Configuration.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration.h
@@ -529,7 +529,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h
index 42a0eb479..d524be149 100644
--- a/config/examples/Geeetech/A10/Configuration.h
+++ b/config/examples/Geeetech/A10/Configuration.h
@@ -510,7 +510,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   // MeCreator2 generated by Autotune
diff --git a/config/examples/Geeetech/A10M/Configuration.h b/config/examples/Geeetech/A10M/Configuration.h
index f3867eaaf..91c688523 100644
--- a/config/examples/Geeetech/A10M/Configuration.h
+++ b/config/examples/Geeetech/A10M/Configuration.h
@@ -510,7 +510,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   // MeCreator2 generated by Autotune
diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h
index ca0b430b8..331cd1004 100644
--- a/config/examples/Geeetech/A20M/Configuration.h
+++ b/config/examples/Geeetech/A20M/Configuration.h
@@ -510,7 +510,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   // MeCreator2 generated by Autotune
diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h
index 729cabd4d..9e030e261 100644
--- a/config/examples/Geeetech/GT2560/Configuration.h
+++ b/config/examples/Geeetech/GT2560/Configuration.h
@@ -530,7 +530,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //12v (120 watt?) MK2a PCB Heatbed into 4mm borosilicate (Geeetech Prusa i3 Pro, Pro/B/C/X)
diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
index 23b998b96..3ec49f0af 100644
--- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
+++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h
index 477f3adbe..1833a7227 100644
--- a/config/examples/Geeetech/MeCreator2/Configuration.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration.h
@@ -524,7 +524,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 //MeCreator2 generated by Autotune
   #define  DEFAULT_bedKp 182.46   // 175.68 189.95
diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
index 4d59b0a0a..2d0476129 100644
--- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h	
@@ -530,7 +530,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //12v (120 watt?) MK2a PCB Heatbed into 4mm borosilicate (Geeetech Prusa i3 Pro, Pro/B/C/X)
diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
index 6182fcc60..110b08ed5 100644
--- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h	
@@ -530,7 +530,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //12v (120 watt?) MK2a PCB Heatbed into 4mm borosilicate (Geeetech Prusa i3 Pro, Pro/B/C/X)
diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
index bdf96caef..84c5fca49 100644
--- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h	
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
index 32bf37856..565eb8457 100644
--- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h	
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h
index 473328915..20b9a379c 100644
--- a/config/examples/Infitary/i3-M508/Configuration.h
+++ b/config/examples/Infitary/i3-M508/Configuration.h
@@ -524,7 +524,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h
index ffb466daf..3f876f284 100644
--- a/config/examples/JGAurora/A1/Configuration.h
+++ b/config/examples/JGAurora/A1/Configuration.h
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h
index 901dc2751..ff4965360 100644
--- a/config/examples/JGAurora/A5/Configuration.h
+++ b/config/examples/JGAurora/A5/Configuration.h
@@ -530,7 +530,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h
index 5c1a90d71..1aa31aabc 100644
--- a/config/examples/JGAurora/A5S/Configuration.h
+++ b/config/examples/JGAurora/A5S/Configuration.h
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h
index 5a0d976ec..4c4ae3f39 100644
--- a/config/examples/MakerParts/Configuration.h
+++ b/config/examples/MakerParts/Configuration.h
@@ -540,7 +540,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h
index dfcf18704..20a6ee295 100644
--- a/config/examples/Malyan/M150/Configuration.h
+++ b/config/examples/Malyan/M150/Configuration.h
@@ -528,7 +528,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h
index ca4d8a201..6e79062d4 100644
--- a/config/examples/Malyan/M200/Configuration.h
+++ b/config/examples/Malyan/M200/Configuration.h
@@ -519,7 +519,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h
index 34d503be8..e95203ae8 100644
--- a/config/examples/Micromake/C1/basic/Configuration.h
+++ b/config/examples/Micromake/C1/basic/Configuration.h
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h
index 2ef62dc1c..fb1fbcf29 100644
--- a/config/examples/Micromake/C1/enhanced/Configuration.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration.h
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h
index 39b734ff9..2e2b1de98 100644
--- a/config/examples/Mks/Robin/Configuration.h
+++ b/config/examples/Mks/Robin/Configuration.h
@@ -521,7 +521,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h
index a846c9f3d..a1dfbb110 100644
--- a/config/examples/Mks/Sbase/Configuration.h
+++ b/config/examples/Mks/Sbase/Configuration.h
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h
index 00388f7c3..5774e14e5 100644
--- a/config/examples/Printrbot/PrintrboardG2/Configuration.h
+++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h
@@ -521,7 +521,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h
index f4db94298..7ee1835f8 100644
--- a/config/examples/RapideLite/RL200/Configuration.h
+++ b/config/examples/RapideLite/RL200/Configuration.h
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h
index 29ec1bc55..bc926f277 100644
--- a/config/examples/RepRapPro/Huxley/Configuration.h
+++ b/config/examples/RepRapPro/Huxley/Configuration.h
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h
index 31ae00383..79d5279c0 100644
--- a/config/examples/RepRapWorld/Megatronics/Configuration.h
+++ b/config/examples/RepRapWorld/Megatronics/Configuration.h
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h
index 8e582a617..873c59dd0 100644
--- a/config/examples/RigidBot/Configuration.h
+++ b/config/examples/RigidBot/Configuration.h
@@ -523,7 +523,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //RigidBot, from pid autotune
diff --git a/config/examples/SCARA/Configuration.h b/config/examples/SCARA/Configuration.h
index 9314c84f4..e2d3ef526 100644
--- a/config/examples/SCARA/Configuration.h
+++ b/config/examples/SCARA/Configuration.h
@@ -535,7 +535,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //12v Heatbed Mk3 12V in parallel
diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h
index 27b55dbe1..5fa690c30 100644
--- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h
+++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/STM32/STM32F10/Configuration.h b/config/examples/STM32/STM32F10/Configuration.h
index 193c4f5bf..1c27780c0 100644
--- a/config/examples/STM32/STM32F10/Configuration.h
+++ b/config/examples/STM32/STM32F10/Configuration.h
@@ -521,7 +521,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/STM32/STM32F4/Configuration.h b/config/examples/STM32/STM32F4/Configuration.h
index 9283e8d3e..5a3b05c17 100644
--- a/config/examples/STM32/STM32F4/Configuration.h
+++ b/config/examples/STM32/STM32F4/Configuration.h
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/STM32/stm32f103ret6/Configuration.h b/config/examples/STM32/stm32f103ret6/Configuration.h
index 3b7299c93..b239f7078 100644
--- a/config/examples/STM32/stm32f103ret6/Configuration.h
+++ b/config/examples/STM32/stm32f103ret6/Configuration.h
@@ -521,7 +521,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h
index d62aa30ee..39fabcf73 100644
--- a/config/examples/Sanguinololu/Configuration.h
+++ b/config/examples/Sanguinololu/Configuration.h
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Tevo/Michelangelo/Configuration.h b/config/examples/Tevo/Michelangelo/Configuration.h
index dcc499d4f..6dd3f87a4 100644
--- a/config/examples/Tevo/Michelangelo/Configuration.h
+++ b/config/examples/Tevo/Michelangelo/Configuration.h
@@ -525,7 +525,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Tevo/Tarantula Pro/Configuration.h b/config/examples/Tevo/Tarantula Pro/Configuration.h
index 80e03a373..9ad154f95 100644
--- a/config/examples/Tevo/Tarantula Pro/Configuration.h	
+++ b/config/examples/Tevo/Tarantula Pro/Configuration.h	
@@ -525,7 +525,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h
index c4c83a01f..0f36e5670 100644
--- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h	
+++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h	
@@ -525,7 +525,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h
index 2d7f272e7..918628f73 100644
--- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h	
+++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h	
@@ -525,7 +525,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/TheBorg/Configuration.h b/config/examples/TheBorg/Configuration.h
index 9a06d27e3..f42418162 100644
--- a/config/examples/TheBorg/Configuration.h
+++ b/config/examples/TheBorg/Configuration.h
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h
index 62e9c5446..abdff9c5f 100644
--- a/config/examples/TinyBoy2/Configuration.h
+++ b/config/examples/TinyBoy2/Configuration.h
@@ -557,7 +557,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h
index a87efbd37..ea163f23e 100644
--- a/config/examples/Tronxy/X1/Configuration.h
+++ b/config/examples/Tronxy/X1/Configuration.h
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h
index 448566d48..3323fdeb9 100644
--- a/config/examples/Tronxy/X3A/Configuration.h
+++ b/config/examples/Tronxy/X3A/Configuration.h
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Tronxy/X5S-2E/Configuration.h b/config/examples/Tronxy/X5S-2E/Configuration.h
index 641ad6c94..3aab95b32 100644
--- a/config/examples/Tronxy/X5S-2E/Configuration.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration.h
@@ -533,7 +533,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   // //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h
index a5dd207e2..f9dd018b5 100644
--- a/config/examples/Tronxy/X5S/Configuration.h
+++ b/config/examples/Tronxy/X5S/Configuration.h
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h
index a4a2196a0..ef8c058ef 100644
--- a/config/examples/Tronxy/XY100/Configuration.h
+++ b/config/examples/Tronxy/XY100/Configuration.h
@@ -531,7 +531,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h
index 629369f2e..642ab219d 100644
--- a/config/examples/UltiMachine/Archim1/Configuration.h
+++ b/config/examples/UltiMachine/Archim1/Configuration.h
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h
index 55bd3ca2d..07bb361b6 100644
--- a/config/examples/UltiMachine/Archim2/Configuration.h
+++ b/config/examples/UltiMachine/Archim2/Configuration.h
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h
index 43e873e16..2a2518eb0 100644
--- a/config/examples/VORONDesign/Configuration.h
+++ b/config/examples/VORONDesign/Configuration.h
@@ -525,7 +525,7 @@
 #define MAX_BED_POWER 205 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h
index f8516d278..cc3945d1e 100644
--- a/config/examples/Velleman/K8200/Configuration.h
+++ b/config/examples/Velleman/K8200/Configuration.h
@@ -544,7 +544,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Velleman/K8400/Configuration.h b/config/examples/Velleman/K8400/Configuration.h
index a4332c011..3a6395d49 100644
--- a/config/examples/Velleman/K8400/Configuration.h
+++ b/config/examples/Velleman/K8400/Configuration.h
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h
index bf221099d..e27928e89 100644
--- a/config/examples/Velleman/K8400/Dual-head/Configuration.h
+++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h
index 437ad212c..ec21ea02a 100644
--- a/config/examples/WASP/PowerWASP/Configuration.h
+++ b/config/examples/WASP/PowerWASP/Configuration.h
@@ -539,7 +539,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h
index afc1d0fed..fa6c9d0f5 100644
--- a/config/examples/Wanhao/Duplicator 6/Configuration.h	
+++ b/config/examples/Wanhao/Duplicator 6/Configuration.h	
@@ -525,7 +525,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h
index a5d8e91f7..715f40b99 100755
--- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h	
+++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h	
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/adafruit/ST7565/Configuration.h b/config/examples/adafruit/ST7565/Configuration.h
index 5dcd03bbb..c479b4153 100644
--- a/config/examples/adafruit/ST7565/Configuration.h
+++ b/config/examples/adafruit/ST7565/Configuration.h
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
index f3b7a0512..87de43c9a 100644
--- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
+++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
@@ -525,7 +525,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h
index afdcc3cc1..595c1c268 100644
--- a/config/examples/delta/FLSUN/kossel/Configuration.h
+++ b/config/examples/delta/FLSUN/kossel/Configuration.h
@@ -525,7 +525,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h
index 8b01ce61e..7c5355ee9 100644
--- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h
+++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h
@@ -525,7 +525,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h
index ca1ae4b8a..09ed93e56 100644
--- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h	
+++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h	
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h
index 3bc8d9c26..208b56864 100644
--- a/config/examples/delta/Hatchbox_Alpha/Configuration.h
+++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h
@@ -530,7 +530,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h
index 18bff0f80..f01298df4 100644
--- a/config/examples/delta/MKS/SBASE/Configuration.h
+++ b/config/examples/delta/MKS/SBASE/Configuration.h
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h
index c7011ec03..72aac3edf 100644
--- a/config/examples/delta/Tevo Little Monster/Configuration.h	
+++ b/config/examples/delta/Tevo Little Monster/Configuration.h	
@@ -524,7 +524,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h
index cc23ded02..40d194e60 100644
--- a/config/examples/delta/generic/Configuration.h
+++ b/config/examples/delta/generic/Configuration.h
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h
index 7507045bc..237c24382 100644
--- a/config/examples/delta/kossel_mini/Configuration.h
+++ b/config/examples/delta/kossel_mini/Configuration.h
@@ -520,7 +520,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h
index a27c3ab48..a23e7d580 100644
--- a/config/examples/delta/kossel_pro/Configuration.h
+++ b/config/examples/delta/kossel_pro/Configuration.h
@@ -512,7 +512,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //Kossel Pro heated bed plate with borosilicate glass
diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h
index 78d7183cd..b89509b4a 100644
--- a/config/examples/delta/kossel_xl/Configuration.h
+++ b/config/examples/delta/kossel_xl/Configuration.h
@@ -524,7 +524,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h
index 2c6a42c17..ccb9019b9 100644
--- a/config/examples/gCreate/gMax1.5+/Configuration.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration.h
@@ -533,7 +533,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h
index 58ed6f6ad..4595a7703 100644
--- a/config/examples/makibox/Configuration.h
+++ b/config/examples/makibox/Configuration.h
@@ -523,7 +523,7 @@
 // drawing too much current from the power supply.
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h
index 66a26ce92..2692e285b 100644
--- a/config/examples/tvrrug/Round2/Configuration.h
+++ b/config/examples/tvrrug/Round2/Configuration.h
@@ -509,7 +509,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
diff --git a/config/examples/wt150/Configuration.h b/config/examples/wt150/Configuration.h
index dfd0f029c..638ab86ab 100644
--- a/config/examples/wt150/Configuration.h
+++ b/config/examples/wt150/Configuration.h
@@ -525,7 +525,7 @@
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
-
+  //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)