Change cancel_heatup to wait_for_heatup

This commit is contained in:
Scott Lahteine 2016-07-06 09:17:50 -07:00
parent 90d8bb53e8
commit 160a2be117
3 changed files with 9 additions and 11 deletions

View file

@ -332,7 +332,7 @@ uint8_t active_extruder = 0;
// Relative Mode. Enable with G91, disable with G90.
static bool relative_mode = false;
bool cancel_heatup = false;
bool wait_for_heatup = true;
const char errormagic[] PROGMEM = "Error:";
const char echomagic[] PROGMEM = "echo:";
@ -1107,7 +1107,7 @@ inline void get_serial_commands() {
// If command was e-stop process now
if (strcmp(command, "M112") == 0) kill(PSTR(MSG_KILLED));
if (strcmp(command, "M108") == 0) cancel_heatup = true;
if (strcmp(command, "M108") == 0) wait_for_heatup = false;
#if defined(NO_TIMEOUTS) && NO_TIMEOUTS > 0
last_command_time = ms;
@ -4520,9 +4520,7 @@ inline void gcode_M105() {
/**
* M108: Cancel heatup and wait for the hotend and bed, this G-code is asynchronously handled in the get_serial_commands() parser
*/
inline void gcode_M108() {
cancel_heatup = true;
}
inline void gcode_M108() { wait_for_heatup = false; }
/**
* M109: Sxxx Wait for extruder(s) to reach temperature. Waits only when heating.
@ -4582,7 +4580,7 @@ inline void gcode_M109() {
float theTarget = -1.0, old_temp = 9999.0;
bool wants_to_cool = false;
cancel_heatup = false;
wait_for_heatup = true;
millis_t now, next_temp_ms = 0, next_cool_check_ms = 0;
KEEPALIVE_STATE(NOT_BUSY);
@ -4646,7 +4644,7 @@ inline void gcode_M109() {
}
}
} while (!cancel_heatup && TEMP_CONDITIONS);
} while (wait_for_heatup && TEMP_CONDITIONS);
LCD_MESSAGEPGM(MSG_HEATING_COMPLETE);
KEEPALIVE_STATE(IN_HANDLER);
@ -4676,7 +4674,7 @@ inline void gcode_M109() {
float theTarget = -1.0, old_temp = 9999.0;
bool wants_to_cool = false;
cancel_heatup = false;
wait_for_heatup = true;
millis_t now, next_temp_ms = 0, next_cool_check_ms = 0;
KEEPALIVE_STATE(NOT_BUSY);
@ -4740,7 +4738,7 @@ inline void gcode_M109() {
}
}
} while (!cancel_heatup && TEMP_BED_CONDITIONS);
} while (wait_for_heatup && TEMP_BED_CONDITIONS);
LCD_MESSAGEPGM(MSG_BED_DONE);
KEEPALIVE_STATE(IN_HANDLER);

View file

@ -559,7 +559,7 @@ static void lcd_status_screen() {
stepper.quick_stop();
print_job_timer.stop();
thermalManager.autotempShutdown();
cancel_heatup = true;
wait_for_heatup = false;
lcd_setstatus(MSG_PRINT_ABORTED, true);
#if DISABLED(DELTA) && DISABLED(SCARA)
set_current_position_from_planner();

View file

@ -95,7 +95,7 @@
extern int absPreheatHPBTemp;
extern int absPreheatFanSpeed;
extern bool cancel_heatup;
extern bool wait_for_heatup;
#if ENABLED(FILAMENT_LCD_DISPLAY)
extern millis_t previous_lcd_status_ms;