Config cleanups

This commit is contained in:
Scott Lahteine 2017-06-01 19:17:52 -05:00
parent e800743268
commit 1919cb0d1e
50 changed files with 109 additions and 96 deletions

View file

@ -312,6 +312,7 @@
#define K1 0.95 //smoothing factor within the PID #define K1 0.95 //smoothing factor within the PID
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
#define DEFAULT_Kp 22.2 #define DEFAULT_Kp 22.2
#define DEFAULT_Ki 1.08 #define DEFAULT_Ki 1.08
@ -1154,7 +1155,7 @@
* - Click the controller to view the LCD menu * - Click the controller to view the LCD menu
* - The LCD will display Japanese, Western, or Cyrillic text * - The LCD will display Japanese, Western, or Cyrillic text
* *
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
* *
* :['JAPANESE', 'WESTERN', 'CYRILLIC'] * :['JAPANESE', 'WESTERN', 'CYRILLIC']
*/ */

View file

@ -220,9 +220,9 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// M355 Case Light command /**
// Set case light brightness/on/off * M355 Case Light on-off / brightness
*/
//#define CASE_LIGHT_ENABLE //#define CASE_LIGHT_ENABLE
#if ENABLED(CASE_LIGHT_ENABLE) #if ENABLED(CASE_LIGHT_ENABLE)
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board

View file

@ -1152,7 +1152,7 @@
* - Click the controller to view the LCD menu * - Click the controller to view the LCD menu
* - The LCD will display Japanese, Western, or Cyrillic text * - The LCD will display Japanese, Western, or Cyrillic text
* *
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
* *
* :['JAPANESE', 'WESTERN', 'CYRILLIC'] * :['JAPANESE', 'WESTERN', 'CYRILLIC']
*/ */

View file

@ -220,9 +220,9 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 35 #define EXTRUDER_AUTO_FAN_TEMPERATURE 35
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// M355 Case Light command /**
// Set case light brightness/on/off * M355 Case Light on-off / brightness
*/
//#define CASE_LIGHT_ENABLE //#define CASE_LIGHT_ENABLE
#if ENABLED(CASE_LIGHT_ENABLE) #if ENABLED(CASE_LIGHT_ENABLE)
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board

View file

@ -1136,7 +1136,7 @@
* - Click the controller to view the LCD menu * - Click the controller to view the LCD menu
* - The LCD will display Japanese, Western, or Cyrillic text * - The LCD will display Japanese, Western, or Cyrillic text
* *
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
* *
* :['JAPANESE', 'WESTERN', 'CYRILLIC'] * :['JAPANESE', 'WESTERN', 'CYRILLIC']
*/ */

View file

@ -220,9 +220,9 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// M355 Case Light command /**
// Set case light brightness/on/off * M355 Case Light on-off / brightness
*/
//#define CASE_LIGHT_ENABLE //#define CASE_LIGHT_ENABLE
#if ENABLED(CASE_LIGHT_ENABLE) #if ENABLED(CASE_LIGHT_ENABLE)
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board

View file

@ -1136,7 +1136,7 @@
* - Click the controller to view the LCD menu * - Click the controller to view the LCD menu
* - The LCD will display Japanese, Western, or Cyrillic text * - The LCD will display Japanese, Western, or Cyrillic text
* *
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
* *
* :['JAPANESE', 'WESTERN', 'CYRILLIC'] * :['JAPANESE', 'WESTERN', 'CYRILLIC']
*/ */

View file

@ -1158,7 +1158,7 @@
* - Click the controller to view the LCD menu * - Click the controller to view the LCD menu
* - The LCD will display Japanese, Western, or Cyrillic text * - The LCD will display Japanese, Western, or Cyrillic text
* *
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
* *
* :['JAPANESE', 'WESTERN', 'CYRILLIC'] * :['JAPANESE', 'WESTERN', 'CYRILLIC']
*/ */

View file

@ -220,9 +220,9 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// M355 Case Light command /**
// Set case light brightness/on/off * M355 Case Light on-off / brightness
*/
//#define CASE_LIGHT_ENABLE //#define CASE_LIGHT_ENABLE
#if ENABLED(CASE_LIGHT_ENABLE) #if ENABLED(CASE_LIGHT_ENABLE)
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board

View file

@ -1144,7 +1144,7 @@
* - Click the controller to view the LCD menu * - Click the controller to view the LCD menu
* - The LCD will display Japanese, Western, or Cyrillic text * - The LCD will display Japanese, Western, or Cyrillic text
* *
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
* *
* :['JAPANESE', 'WESTERN', 'CYRILLIC'] * :['JAPANESE', 'WESTERN', 'CYRILLIC']
*/ */

View file

@ -220,9 +220,9 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// M355 Case Light command /**
// Set case light brightness/on/off * M355 Case Light on-off / brightness
*/
//#define CASE_LIGHT_ENABLE //#define CASE_LIGHT_ENABLE
#if ENABLED(CASE_LIGHT_ENABLE) #if ENABLED(CASE_LIGHT_ENABLE)
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board

View file

@ -1147,7 +1147,7 @@
* - Click the controller to view the LCD menu * - Click the controller to view the LCD menu
* - The LCD will display Japanese, Western, or Cyrillic text * - The LCD will display Japanese, Western, or Cyrillic text
* *
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
* *
* :['JAPANESE', 'WESTERN', 'CYRILLIC'] * :['JAPANESE', 'WESTERN', 'CYRILLIC']
*/ */

View file

@ -220,9 +220,9 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// M355 Case Light command /**
// Set case light brightness/on/off * M355 Case Light on-off / brightness
*/
//#define CASE_LIGHT_ENABLE //#define CASE_LIGHT_ENABLE
#if ENABLED(CASE_LIGHT_ENABLE) #if ENABLED(CASE_LIGHT_ENABLE)
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board

View file

@ -332,6 +332,7 @@
#define K1 0.95 //smoothing factor within the PID #define K1 0.95 //smoothing factor within the PID
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
//#define DEFAULT_Kp 22.2 //#define DEFAULT_Kp 22.2
//#define DEFAULT_Ki 1.08 //#define DEFAULT_Ki 1.08
@ -1185,7 +1186,7 @@
* - Click the controller to view the LCD menu * - Click the controller to view the LCD menu
* - The LCD will display Japanese, Western, or Cyrillic text * - The LCD will display Japanese, Western, or Cyrillic text
* *
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
* *
* :['JAPANESE', 'WESTERN', 'CYRILLIC'] * :['JAPANESE', 'WESTERN', 'CYRILLIC']
*/ */

View file

@ -233,9 +233,9 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// M355 Case Light command /**
// Set case light brightness/on/off * M355 Case Light on-off / brightness
*/
//#define CASE_LIGHT_ENABLE //#define CASE_LIGHT_ENABLE
#if ENABLED(CASE_LIGHT_ENABLE) #if ENABLED(CASE_LIGHT_ENABLE)
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board

View file

@ -312,6 +312,7 @@
#define K1 0.95 //smoothing factor within the PID #define K1 0.95 //smoothing factor within the PID
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
//#define DEFAULT_Kp 22.2 //#define DEFAULT_Kp 22.2
//#define DEFAULT_Ki 1.08 //#define DEFAULT_Ki 1.08
@ -1153,7 +1154,7 @@
* - Click the controller to view the LCD menu * - Click the controller to view the LCD menu
* - The LCD will display Japanese, Western, or Cyrillic text * - The LCD will display Japanese, Western, or Cyrillic text
* *
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
* *
* :['JAPANESE', 'WESTERN', 'CYRILLIC'] * :['JAPANESE', 'WESTERN', 'CYRILLIC']
*/ */

View file

@ -220,9 +220,9 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// M355 Case Light command /**
// Set case light brightness/on/off * M355 Case Light on-off / brightness
*/
//#define CASE_LIGHT_ENABLE //#define CASE_LIGHT_ENABLE
#if ENABLED(CASE_LIGHT_ENABLE) #if ENABLED(CASE_LIGHT_ENABLE)
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board

View file

@ -312,6 +312,7 @@
#define K1 0.95 //smoothing factor within the PID #define K1 0.95 //smoothing factor within the PID
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
//#define DEFAULT_Kp 22.2 //#define DEFAULT_Kp 22.2
//#define DEFAULT_Ki 1.08 //#define DEFAULT_Ki 1.08
@ -1153,7 +1154,7 @@
* - Click the controller to view the LCD menu * - Click the controller to view the LCD menu
* - The LCD will display Japanese, Western, or Cyrillic text * - The LCD will display Japanese, Western, or Cyrillic text
* *
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
* *
* :['JAPANESE', 'WESTERN', 'CYRILLIC'] * :['JAPANESE', 'WESTERN', 'CYRILLIC']
*/ */

View file

@ -312,6 +312,7 @@
#define K1 0.95 //smoothing factor within the PID #define K1 0.95 //smoothing factor within the PID
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
#define DEFAULT_Kp 22.2 #define DEFAULT_Kp 22.2
#define DEFAULT_Ki 1.08 #define DEFAULT_Ki 1.08
@ -1153,7 +1154,7 @@
* - Click the controller to view the LCD menu * - Click the controller to view the LCD menu
* - The LCD will display Japanese, Western, or Cyrillic text * - The LCD will display Japanese, Western, or Cyrillic text
* *
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
* *
* :['JAPANESE', 'WESTERN', 'CYRILLIC'] * :['JAPANESE', 'WESTERN', 'CYRILLIC']
*/ */

View file

@ -1152,7 +1152,7 @@
* - Click the controller to view the LCD menu * - Click the controller to view the LCD menu
* - The LCD will display Japanese, Western, or Cyrillic text * - The LCD will display Japanese, Western, or Cyrillic text
* *
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
* *
* :['JAPANESE', 'WESTERN', 'CYRILLIC'] * :['JAPANESE', 'WESTERN', 'CYRILLIC']
*/ */

View file

@ -220,9 +220,9 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// M355 Case Light command /**
// Set case light brightness/on/off * M355 Case Light on-off / brightness
*/
//#define CASE_LIGHT_ENABLE //#define CASE_LIGHT_ENABLE
#if ENABLED(CASE_LIGHT_ENABLE) #if ENABLED(CASE_LIGHT_ENABLE)
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board

View file

@ -1169,7 +1169,7 @@
* - Click the controller to view the LCD menu * - Click the controller to view the LCD menu
* - The LCD will display Japanese, Western, or Cyrillic text * - The LCD will display Japanese, Western, or Cyrillic text
* *
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
* *
* :['JAPANESE', 'WESTERN', 'CYRILLIC'] * :['JAPANESE', 'WESTERN', 'CYRILLIC']
*/ */

View file

@ -220,9 +220,9 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// M355 Case Light command /**
// Set case light brightness/on/off * M355 Case Light on-off / brightness
*/
//#define CASE_LIGHT_ENABLE //#define CASE_LIGHT_ENABLE
#if ENABLED(CASE_LIGHT_ENABLE) #if ENABLED(CASE_LIGHT_ENABLE)
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board

View file

@ -1173,7 +1173,7 @@
* - Click the controller to view the LCD menu * - Click the controller to view the LCD menu
* - The LCD will display Japanese, Western, or Cyrillic text * - The LCD will display Japanese, Western, or Cyrillic text
* *
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
* *
* :['JAPANESE', 'WESTERN', 'CYRILLIC'] * :['JAPANESE', 'WESTERN', 'CYRILLIC']
*/ */

View file

@ -220,9 +220,9 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// M355 Case Light command /**
// Set case light brightness/on/off * M355 Case Light on-off / brightness
*/
//#define CASE_LIGHT_ENABLE //#define CASE_LIGHT_ENABLE
#if ENABLED(CASE_LIGHT_ENABLE) #if ENABLED(CASE_LIGHT_ENABLE)
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board

View file

@ -339,6 +339,7 @@
#define K1 0.95 //smoothing factor within the PID #define K1 0.95 //smoothing factor within the PID
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
//#define DEFAULT_Kp 22.2 //#define DEFAULT_Kp 22.2
//#define DEFAULT_Ki 1.08 //#define DEFAULT_Ki 1.08
@ -1209,7 +1210,7 @@
* - Click the controller to view the LCD menu * - Click the controller to view the LCD menu
* - The LCD will display Japanese, Western, or Cyrillic text * - The LCD will display Japanese, Western, or Cyrillic text
* *
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
* *
* :['JAPANESE', 'WESTERN', 'CYRILLIC'] * :['JAPANESE', 'WESTERN', 'CYRILLIC']
*/ */

View file

@ -220,9 +220,9 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// M355 Case Light command /**
// Set case light brightness/on/off * M355 Case Light on-off / brightness
*/
//#define CASE_LIGHT_ENABLE //#define CASE_LIGHT_ENABLE
#if ENABLED(CASE_LIGHT_ENABLE) #if ENABLED(CASE_LIGHT_ENABLE)
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board

View file

@ -1144,7 +1144,7 @@
* - Click the controller to view the LCD menu * - Click the controller to view the LCD menu
* - The LCD will display Japanese, Western, or Cyrillic text * - The LCD will display Japanese, Western, or Cyrillic text
* *
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
* *
* :['JAPANESE', 'WESTERN', 'CYRILLIC'] * :['JAPANESE', 'WESTERN', 'CYRILLIC']
*/ */

View file

@ -220,9 +220,9 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// M355 Case Light command /**
// Set case light brightness/on/off * M355 Case Light on-off / brightness
*/
//#define CASE_LIGHT_ENABLE //#define CASE_LIGHT_ENABLE
#if ENABLED(CASE_LIGHT_ENABLE) #if ENABLED(CASE_LIGHT_ENABLE)
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board

View file

@ -312,6 +312,7 @@
#define K1 0.95 //smoothing factor within the PID #define K1 0.95 //smoothing factor within the PID
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
#define DEFAULT_Kp 22.2 #define DEFAULT_Kp 22.2
#define DEFAULT_Ki 1.08 #define DEFAULT_Ki 1.08
@ -1153,7 +1154,7 @@
* - Click the controller to view the LCD menu * - Click the controller to view the LCD menu
* - The LCD will display Japanese, Western, or Cyrillic text * - The LCD will display Japanese, Western, or Cyrillic text
* *
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
* *
* :['JAPANESE', 'WESTERN', 'CYRILLIC'] * :['JAPANESE', 'WESTERN', 'CYRILLIC']
*/ */

View file

@ -312,6 +312,7 @@
#define K1 0.95 //smoothing factor within the PID #define K1 0.95 //smoothing factor within the PID
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
//#define DEFAULT_Kp 22.2 //#define DEFAULT_Kp 22.2
//#define DEFAULT_Ki 1.08 //#define DEFAULT_Ki 1.08
@ -1271,7 +1272,7 @@
* - Click the controller to view the LCD menu * - Click the controller to view the LCD menu
* - The LCD will display Japanese, Western, or Cyrillic text * - The LCD will display Japanese, Western, or Cyrillic text
* *
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
* *
* :['JAPANESE', 'WESTERN', 'CYRILLIC'] * :['JAPANESE', 'WESTERN', 'CYRILLIC']
*/ */

View file

@ -220,9 +220,9 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// M355 Case Light command /**
// Set case light brightness/on/off * M355 Case Light on-off / brightness
*/
//#define CASE_LIGHT_ENABLE //#define CASE_LIGHT_ENABLE
#if ENABLED(CASE_LIGHT_ENABLE) #if ENABLED(CASE_LIGHT_ENABLE)
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board

View file

@ -312,6 +312,7 @@
#define K1 0.95 //smoothing factor within the PID #define K1 0.95 //smoothing factor within the PID
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
//#define DEFAULT_Kp 22.2 //#define DEFAULT_Kp 22.2
//#define DEFAULT_Ki 1.08 //#define DEFAULT_Ki 1.08
@ -1273,7 +1274,7 @@
* - Click the controller to view the LCD menu * - Click the controller to view the LCD menu
* - The LCD will display Japanese, Western, or Cyrillic text * - The LCD will display Japanese, Western, or Cyrillic text
* *
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
* *
* :['JAPANESE', 'WESTERN', 'CYRILLIC'] * :['JAPANESE', 'WESTERN', 'CYRILLIC']
*/ */

View file

@ -220,9 +220,9 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// M355 Case Light command /**
// Set case light brightness/on/off * M355 Case Light on-off / brightness
*/
//#define CASE_LIGHT_ENABLE //#define CASE_LIGHT_ENABLE
#if ENABLED(CASE_LIGHT_ENABLE) #if ENABLED(CASE_LIGHT_ENABLE)
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board

View file

@ -312,6 +312,7 @@
#define K1 0.95 //smoothing factor within the PID #define K1 0.95 //smoothing factor within the PID
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
#define DEFAULT_Kp 22.2 #define DEFAULT_Kp 22.2
#define DEFAULT_Ki 1.08 #define DEFAULT_Ki 1.08
@ -1262,7 +1263,7 @@
* - Click the controller to view the LCD menu * - Click the controller to view the LCD menu
* - The LCD will display Japanese, Western, or Cyrillic text * - The LCD will display Japanese, Western, or Cyrillic text
* *
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
* *
* :['JAPANESE', 'WESTERN', 'CYRILLIC'] * :['JAPANESE', 'WESTERN', 'CYRILLIC']
*/ */

View file

@ -220,9 +220,9 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// M355 Case Light command /**
// Set case light brightness/on/off * M355 Case Light on-off / brightness
*/
//#define CASE_LIGHT_ENABLE //#define CASE_LIGHT_ENABLE
#if ENABLED(CASE_LIGHT_ENABLE) #if ENABLED(CASE_LIGHT_ENABLE)
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board

View file

@ -312,6 +312,7 @@
#define K1 0.95 //smoothing factor within the PID #define K1 0.95 //smoothing factor within the PID
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
#define DEFAULT_Kp 22.2 #define DEFAULT_Kp 22.2
#define DEFAULT_Ki 1.08 #define DEFAULT_Ki 1.08
@ -1265,7 +1266,7 @@
* - Click the controller to view the LCD menu * - Click the controller to view the LCD menu
* - The LCD will display Japanese, Western, or Cyrillic text * - The LCD will display Japanese, Western, or Cyrillic text
* *
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
* *
* :['JAPANESE', 'WESTERN', 'CYRILLIC'] * :['JAPANESE', 'WESTERN', 'CYRILLIC']
*/ */

View file

@ -220,9 +220,9 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// M355 Case Light command /**
// Set case light brightness/on/off * M355 Case Light on-off / brightness
*/
//#define CASE_LIGHT_ENABLE //#define CASE_LIGHT_ENABLE
#if ENABLED(CASE_LIGHT_ENABLE) #if ENABLED(CASE_LIGHT_ENABLE)
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board

View file

@ -1271,7 +1271,7 @@
* - Click the controller to view the LCD menu * - Click the controller to view the LCD menu
* - The LCD will display Japanese, Western, or Cyrillic text * - The LCD will display Japanese, Western, or Cyrillic text
* *
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
* *
* :['JAPANESE', 'WESTERN', 'CYRILLIC'] * :['JAPANESE', 'WESTERN', 'CYRILLIC']
*/ */

View file

@ -225,9 +225,9 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// M355 Case Light command /**
// Set case light brightness/on/off * M355 Case Light on-off / brightness
*/
//#define CASE_LIGHT_ENABLE //#define CASE_LIGHT_ENABLE
#if ENABLED(CASE_LIGHT_ENABLE) #if ENABLED(CASE_LIGHT_ENABLE)
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board

View file

@ -1329,7 +1329,7 @@
* - Click the controller to view the LCD menu * - Click the controller to view the LCD menu
* - The LCD will display Japanese, Western, or Cyrillic text * - The LCD will display Japanese, Western, or Cyrillic text
* *
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
* *
* :['JAPANESE', 'WESTERN', 'CYRILLIC'] * :['JAPANESE', 'WESTERN', 'CYRILLIC']
*/ */

View file

@ -220,9 +220,9 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// M355 Case Light command /**
// Set case light brightness/on/off * M355 Case Light on-off / brightness
*/
//#define CASE_LIGHT_ENABLE //#define CASE_LIGHT_ENABLE
#if ENABLED(CASE_LIGHT_ENABLE) #if ENABLED(CASE_LIGHT_ENABLE)
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board

View file

@ -1170,7 +1170,7 @@
* - Click the controller to view the LCD menu * - Click the controller to view the LCD menu
* - The LCD will display Japanese, Western, or Cyrillic text * - The LCD will display Japanese, Western, or Cyrillic text
* *
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
* *
* :['JAPANESE', 'WESTERN', 'CYRILLIC'] * :['JAPANESE', 'WESTERN', 'CYRILLIC']
*/ */

View file

@ -220,9 +220,9 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// M355 Case Light command /**
// Set case light brightness/on/off * M355 Case Light on-off / brightness
*/
//#define CASE_LIGHT_ENABLE //#define CASE_LIGHT_ENABLE
#if ENABLED(CASE_LIGHT_ENABLE) #if ENABLED(CASE_LIGHT_ENABLE)
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board

View file

@ -312,6 +312,7 @@
#define K1 0.95 //smoothing factor within the PID #define K1 0.95 //smoothing factor within the PID
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
#define DEFAULT_Kp 22.2 #define DEFAULT_Kp 22.2
#define DEFAULT_Ki 1.08 #define DEFAULT_Ki 1.08
@ -1156,7 +1157,7 @@
* - Click the controller to view the LCD menu * - Click the controller to view the LCD menu
* - The LCD will display Japanese, Western, or Cyrillic text * - The LCD will display Japanese, Western, or Cyrillic text
* *
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
* *
* :['JAPANESE', 'WESTERN', 'CYRILLIC'] * :['JAPANESE', 'WESTERN', 'CYRILLIC']
*/ */

View file

@ -220,9 +220,9 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// M355 Case Light command /**
// Set case light brightness/on/off * M355 Case Light on-off / brightness
*/
//#define CASE_LIGHT_ENABLE //#define CASE_LIGHT_ENABLE
#if ENABLED(CASE_LIGHT_ENABLE) #if ENABLED(CASE_LIGHT_ENABLE)
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board

View file

@ -1149,7 +1149,7 @@
* - Click the controller to view the LCD menu * - Click the controller to view the LCD menu
* - The LCD will display Japanese, Western, or Cyrillic text * - The LCD will display Japanese, Western, or Cyrillic text
* *
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
* *
* :['JAPANESE', 'WESTERN', 'CYRILLIC'] * :['JAPANESE', 'WESTERN', 'CYRILLIC']
*/ */

View file

@ -220,9 +220,9 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// M355 Case Light command /**
// Set case light brightness/on/off * M355 Case Light on-off / brightness
*/
//#define CASE_LIGHT_ENABLE //#define CASE_LIGHT_ENABLE
#if ENABLED(CASE_LIGHT_ENABLE) #if ENABLED(CASE_LIGHT_ENABLE)
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board

View file

@ -317,6 +317,7 @@
#define DEFAULT_Kd 110.78 #define DEFAULT_Kd 110.78
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
//#define DEFAULT_Kp 22.2 //#define DEFAULT_Kp 22.2
//#define DEFAULT_Ki 1.08 //#define DEFAULT_Ki 1.08
@ -1158,7 +1159,7 @@
* - Click the controller to view the LCD menu * - Click the controller to view the LCD menu
* - The LCD will display Japanese, Western, or Cyrillic text * - The LCD will display Japanese, Western, or Cyrillic text
* *
* See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
* *
* :['JAPANESE', 'WESTERN', 'CYRILLIC'] * :['JAPANESE', 'WESTERN', 'CYRILLIC']
*/ */

View file

@ -220,9 +220,9 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// M355 Case Light command /**
// Set case light brightness/on/off * M355 Case Light on-off / brightness
*/
//#define CASE_LIGHT_ENABLE //#define CASE_LIGHT_ENABLE
#if ENABLED(CASE_LIGHT_ENABLE) #if ENABLED(CASE_LIGHT_ENABLE)
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board