Merge pull request #7916 from thinkyhead/bf2_probeless_ubl

[2.0.x] Allow UBL G29 and G26 to build without a probe
This commit is contained in:
Scott Lahteine 2017-10-10 00:30:27 -05:00 committed by GitHub
commit 1d04197f2f
5 changed files with 375 additions and 343 deletions

View file

@ -73,11 +73,17 @@ script:
- opt_set ABL_GRID_POINTS_Y 16
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#
# Test a simple build of AUTO_BED_LEVELING_UBL
# Test a probeless build of AUTO_BED_LEVELING_UBL
#
- restore_configs
- opt_enable AUTO_BED_LEVELING_UBL UBL_G26_MESH_EDITING ENABLE_LEVELING_FADE_HEIGHT BLTOUCH EEPROM_SETTINGS G3D_PANEL
- opt_enable_adv CUSTOM_USER_MENUS I2C_POSITION_ENCODERS BABYSTEPPING BABYSTEP_ZPROBE_OFFSET
- opt_enable AUTO_BED_LEVELING_UBL UBL_G26_MESH_EDITING ENABLE_LEVELING_FADE_HEIGHT EEPROM_SETTINGS G3D_PANEL
- opt_enable_adv CUSTOM_USER_MENUS I2C_POSITION_ENCODERS BABYSTEPPING
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#
# ...and with a probe
#
- opt_enable BLTOUCH
- opt_enable_adv BABYSTEP_ZPROBE_OFFSET
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#
# Test a Sled Z Probe

View file

@ -135,17 +135,6 @@
extern char lcd_status_message[];
#endif
// Remove this if all is well with Teensy compile:
#if 0
#if AVR_AT90USB1286_FAMILY // Teensyduino & Printrboard IDE extensions have compile errors without this
inline void sync_plan_position_e() { planner.set_e_position_mm(current_position[E_AXIS]); }
inline void set_current_to_destination() { COPY(current_position, destination); }
#else
extern void sync_plan_position_e();
extern void set_current_to_destination();
#endif
#endif
#if ENABLED(NEWPANEL)
void lcd_setstatusPGM(const char* const message, const int8_t level);
void chirp_at_user();

View file

@ -85,13 +85,16 @@ class unified_bed_leveling {
g29_phase_value,
g29_repetition_cnt,
g29_storage_slot,
g29_map_type,
g29_grid_size;
g29_map_type;
static bool g29_c_flag, g29_x_flag, g29_y_flag;
static float g29_x_pos, g29_y_pos,
g29_card_thickness,
g29_constant;
#if HAS_BED_PROBE
static int g29_grid_size;
#endif
#if ENABLED(UBL_G26_MESH_VALIDATION)
static float g26_extrusion_multiplier,
g26_retraction_multiplier,

View file

@ -65,8 +65,7 @@
unified_bed_leveling::g29_phase_value,
unified_bed_leveling::g29_repetition_cnt,
unified_bed_leveling::g29_storage_slot = 0,
unified_bed_leveling::g29_map_type,
unified_bed_leveling::g29_grid_size;
unified_bed_leveling::g29_map_type;
bool unified_bed_leveling::g29_c_flag,
unified_bed_leveling::g29_x_flag,
unified_bed_leveling::g29_y_flag;
@ -75,6 +74,10 @@
unified_bed_leveling::g29_card_thickness = 0.0,
unified_bed_leveling::g29_constant = 0.0;
#if HAS_BED_PROBE
int unified_bed_leveling::g29_grid_size;
#endif
/**
* G29: Unified Bed Leveling by Roxy
*
@ -310,6 +313,8 @@
return;
}
if (g29_parameter_parsing()) return; // abort if parsing the simple parameters causes a problem,
// Check for commands that require the printer to be homed
if (axis_unhomed_error()) {
const int8_t p_val = parser.intval('P', -1);
@ -317,8 +322,6 @@
gcode.home_all_axes();
}
if (g29_parameter_parsing()) return; // abort if parsing the simple parameters causes a problem,
// Invalidate Mesh Points. This command is a little bit asymmetrical because
// it directly specifies the repetition count and does not use the 'R' parameter.
if (parser.seen('I')) {
@ -381,6 +384,8 @@
}
}
#if HAS_BED_PROBE
if (parser.seen('J')) {
if (g29_grid_size) { // if not 0 it is a normal n x n grid being probed
save_ubl_active_state_and_disable();
@ -416,6 +421,8 @@
}
}
#endif // HAS_BED_PROBE
if (parser.seen('P')) {
if (WITHIN(g29_phase_value, 0, 1) && state.storage_slot == -1) {
state.storage_slot = 0;
@ -431,6 +438,8 @@
SERIAL_PROTOCOLLNPGM("Mesh zeroed.");
break;
#if HAS_BED_PROBE
case 1:
//
// Invalidate Entire Mesh and Automatically Probe Mesh in areas that can be reached by the probe
@ -449,6 +458,8 @@
parser.seen('T'), parser.seen('E'), parser.seen('U'));
break;
#endif
case 2: {
#if ENABLED(NEWPANEL)
//
@ -776,6 +787,8 @@
z_values[x][y] += g29_constant;
}
#if HAS_BED_PROBE
/**
* Probe all invalidated locations of the mesh that can be reached by the probe.
* This attempts to fill in locations closest to the nozzle's start location first.
@ -930,7 +943,10 @@
}
}
#endif // HAS_BED_PROBE
#if ENABLED(NEWPANEL)
float unified_bed_leveling::measure_point_with_encoder() {
while (ubl_lcd_clicked()) delay(50); // wait for user to release encoder wheel
@ -1080,7 +1096,8 @@
do_blocking_move_to_z(Z_CLEARANCE_DEPLOY_PROBE);
do_blocking_move_to_xy(lx, ly);
}
#endif
#endif // NEWPANEL
bool unified_bed_leveling::g29_parameter_parsing() {
bool err_flag = false;
@ -1114,19 +1131,34 @@
}
if (parser.seen('P')) {
g29_phase_value = parser.value_int();
const int pv = parser.value_int();
#if !HAS_BED_PROBE
if (pv == 1) {
SERIAL_PROTOCOLLNPGM("G29 P1 requires a probe.\n");
err_flag = true;
}
else
#endif
{
g29_phase_value = pv;
if (!WITHIN(g29_phase_value, 0, 6)) {
SERIAL_PROTOCOLLNPGM("?(P)hase value invalid (0-6).\n");
err_flag = true;
}
}
}
if (parser.seen('J')) {
#if HAS_BED_PROBE
g29_grid_size = parser.has_value() ? parser.value_int() : 0;
if (g29_grid_size && !WITHIN(g29_grid_size, 2, 9)) {
SERIAL_PROTOCOLLNPGM("?Invalid grid size (J) specified (2-9).\n");
err_flag = true;
}
#else
SERIAL_PROTOCOLLNPGM("G29 J action requires a probe.\n");
err_flag = true;
#endif
}
if (g29_x_flag != g29_y_flag) {
@ -1624,6 +1656,8 @@
}
}
#if HAS_BED_PROBE
void unified_bed_leveling::tilt_mesh_based_on_probed_grid(const bool do_ubl_mesh_map) {
constexpr int16_t x_min = max(MIN_PROBE_X, UBL_MESH_MIN_X),
x_max = min(MAX_PROBE_X, UBL_MESH_MAX_X),
@ -1769,6 +1803,8 @@
if (do_ubl_mesh_map) display_map(g29_map_type);
}
#endif // HAS_BED_PROBE
#if ENABLED(UBL_G29_P31)
void unified_bed_leveling::smart_fill_wlsf(const float &weight_factor) {

View file

@ -647,9 +647,7 @@ static_assert(1 >= 0
/**
* Require some kind of probe for bed leveling and probe testing
*/
#if ENABLED(AUTO_BED_LEVELING_UBL)
#error "Unified Bed Leveling requires a probe: FIX_MOUNTED_PROBE, BLTOUCH, SOLENOID_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or Z Servo."
#elif HAS_ABL
#if HAS_ABL && DISABLED(AUTO_BED_LEVELING_UBL)
#error "Auto Bed Leveling requires one of these: PROBE_MANUALLY, FIX_MOUNTED_PROBE, BLTOUCH, SOLENOID_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or a Z Servo."
#endif