Tweaks to CR-10S configuration

This commit is contained in:
Scott Lahteine 2018-10-30 23:36:32 -05:00
parent b5d7f69b51
commit 1d366db764

View file

@ -90,7 +90,7 @@
*/ */
// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. // Enable to show the bitmap in Marlin/_Bootscreen.h on startup.
//#define SHOW_CUSTOM_BOOTSCREEN #define SHOW_CUSTOM_BOOTSCREEN
// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. // Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen.
#define CUSTOM_STATUS_SCREEN_IMAGE #define CUSTOM_STATUS_SCREEN_IMAGE
@ -675,9 +675,9 @@
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 575 // X, Y, Z and E acceleration for printing moves #define DEFAULT_ACCELERATION 600 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 800 // X, Y, Z acceleration for travel (non printing) moves
/** /**
* Default Jerk (mm/s) * Default Jerk (mm/s)
@ -687,8 +687,8 @@
* When changing speed and direction, if the difference is less than the * When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously. * value set here, it may happen instantaneously.
*/ */
#define DEFAULT_XJERK 20.0 #define DEFAULT_XJERK 10.0
#define DEFAULT_YJERK 20.0 #define DEFAULT_YJERK 10.0
#define DEFAULT_ZJERK 0.4 #define DEFAULT_ZJERK 0.4
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
@ -934,15 +934,15 @@
// @section machine // @section machine
// The size of the print bed // The size of the print bed
#define X_BED_SIZE 300 #define X_BED_SIZE 296 // Nozzle is at X4 when homed
#define Y_BED_SIZE 300 #define Y_BED_SIZE 298 // Nozzle is at Y2 when homed
// Travel limits (mm) after homing, corresponding to endstop positions. // Travel limits (mm) after homing, corresponding to endstop positions.
#define X_MIN_POS 0 #define X_MIN_POS 0
#define Y_MIN_POS 0 #define Y_MIN_POS 0
#define Z_MIN_POS 0 #define Z_MIN_POS 0
#define X_MAX_POS X_BED_SIZE #define X_MAX_POS 319 // 15mm Extra space on the right end
#define Y_MAX_POS Y_BED_SIZE #define Y_MAX_POS 306 // 4mm Extra space behind the bed
#define Z_MAX_POS 400 #define Z_MAX_POS 400
// Z raise distance for tool-change, as needed for some extruders // Z raise distance for tool-change, as needed for some extruders
@ -1200,8 +1200,8 @@
// Manually set the home position. Leave these undefined for automatic settings. // Manually set the home position. Leave these undefined for automatic settings.
// For DELTA this is the top-center of the Cartesian print volume. // For DELTA this is the top-center of the Cartesian print volume.
//#define MANUAL_X_HOME_POS 0 #define MANUAL_X_HOME_POS 4
//#define MANUAL_Y_HOME_POS 0 #define MANUAL_Y_HOME_POS 2
//#define MANUAL_Z_HOME_POS 0 //#define MANUAL_Z_HOME_POS 0
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
@ -1216,13 +1216,13 @@
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
#define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). #define Z_SAFE_HOMING_X_POINT 150 // X point for Z homing when homing all axes (G28).
#define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). #define Z_SAFE_HOMING_Y_POINT 150 // Y point for Z homing when homing all axes (G28).
#endif #endif
// Homing speeds (mm/m) // Homing speeds (mm/m)
#define HOMING_FEEDRATE_XY (50*60) #define HOMING_FEEDRATE_XY (50*60)
#define HOMING_FEEDRATE_Z (4*60) #define HOMING_FEEDRATE_Z (8*60)
// Validate that endstops are triggered on homing moves // Validate that endstops are triggered on homing moves
#define VALIDATE_HOMING_ENDSTOPS #define VALIDATE_HOMING_ENDSTOPS