From 1e05d192ab771f7ab0280a6591b69ae8c466cc0d Mon Sep 17 00:00:00 2001 From: Erik van der Zalm Date: Sun, 9 Jun 2013 12:21:16 +0200 Subject: [PATCH] Make the beep tone less offensive --- .../ultralcd_implementation_hitachi_HD44780.h | 1514 ++++++++--------- 1 file changed, 757 insertions(+), 757 deletions(-) diff --git a/Marlin/ultralcd_implementation_hitachi_HD44780.h b/Marlin/ultralcd_implementation_hitachi_HD44780.h index a02524487..68972f369 100644 --- a/Marlin/ultralcd_implementation_hitachi_HD44780.h +++ b/Marlin/ultralcd_implementation_hitachi_HD44780.h @@ -1,757 +1,757 @@ -#ifndef ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H -#define ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H - -/** -* Implementation of the LCD display routines for a hitachi HD44780 display. These are common LCD character displays. -* When selecting the rusian language, a slightly different LCD implementation is used to handle UTF8 characters. -**/ - -#ifndef REPRAPWORLD_KEYPAD -extern volatile uint8_t buttons; //the last checked buttons in a bit array. -#else -extern volatile uint16_t buttons; //an extended version of the last checked buttons in a bit array. -#endif - -//////////////////////////////////// -// Setup button and encode mappings for each panel (into 'buttons' variable) -// -// This is just to map common functions (across different panels) onto the same -// macro name. The mapping is independent of whether the button is directly connected or -// via a shift/i2c register. - -#ifdef ULTIPANEL -// All Ultipanels might have an encoder - so this is always be mapped onto first two bits -#define BLEN_B 1 -#define BLEN_A 0 - -#define EN_B (1< -1 - // encoder click is directly connected - #define BLEN_C 2 - #define EN_C (1< -1 - // the pause/stop/restart button is connected to BTN_ENC when used - #define B_ST (EN_C) // Map the pause/stop/resume button into its normalized functional name - #define LCD_CLICKED (buttons&(B_MI|B_RI|B_ST)) // pause/stop button also acts as click until we implement proper pause/stop. - #else - #define LCD_CLICKED (buttons&(B_MI|B_RI)) - #endif - - // I2C buttons take too long to read inside an interrupt context and so we read them during lcd_update - #define LCD_HAS_SLOW_BUTTONS - -#elif defined(LCD_I2C_PANELOLU2) - // encoder click can be read through I2C if not directly connected - #if BTN_ENC <= 0 - #define B_I2C_BTN_OFFSET 3 // (the first three bit positions reserved for EN_A, EN_B, EN_C) - - #define B_MI (PANELOLU2_ENCODER_C< - #include - #include - #define LCD_CLASS LiquidCrystal_I2C - LCD_CLASS lcd(LCD_I2C_ADDRESS,LCD_I2C_PIN_EN,LCD_I2C_PIN_RW,LCD_I2C_PIN_RS,LCD_I2C_PIN_D4,LCD_I2C_PIN_D5,LCD_I2C_PIN_D6,LCD_I2C_PIN_D7); - -#elif defined(LCD_I2C_TYPE_MCP23017) - //for the LED indicators (which maybe mapped to different things in lcd_implementation_update_indicators()) - #define LED_A 0x04 //100 - #define LED_B 0x02 //010 - #define LED_C 0x01 //001 - - #define LCD_HAS_STATUS_INDICATORS - - #include - #include - #define LCD_CLASS LiquidTWI2 - LCD_CLASS lcd(LCD_I2C_ADDRESS); - -#elif defined(LCD_I2C_TYPE_MCP23008) - #include - #include - #define LCD_CLASS LiquidTWI2 - LCD_CLASS lcd(LCD_I2C_ADDRESS); - -#elif defined(LCD_I2C_TYPE_PCA8574) - #include - #define LCD_CLASS LiquidCrystal_I2C - LCD_CLASS lcd(LCD_I2C_ADDRESS, LCD_WIDTH, LCD_HEIGHT); - -#else - // Standard directly connected LCD implementations - #if LANGUAGE_CHOICE == 6 - #include "LiquidCrystalRus.h" - #define LCD_CLASS LiquidCrystalRus - #else - #include - #define LCD_CLASS LiquidCrystal - #endif - LCD_CLASS lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7); //RS,Enable,D4,D5,D6,D7 -#endif - -/* Custom characters defined in the first 8 characters of the LCD */ -#define LCD_STR_BEDTEMP "\x00" -#define LCD_STR_DEGREE "\x01" -#define LCD_STR_THERMOMETER "\x02" -#define LCD_STR_UPLEVEL "\x03" -#define LCD_STR_REFRESH "\x04" -#define LCD_STR_FOLDER "\x05" -#define LCD_STR_FEEDRATE "\x06" -#define LCD_STR_CLOCK "\x07" -#define LCD_STR_ARROW_RIGHT "\x7E" /* from the default character set */ - -static void lcd_implementation_init() -{ - byte bedTemp[8] = - { - B00000, - B11111, - B10101, - B10001, - B10101, - B11111, - B00000, - B00000 - }; //thanks Sonny Mounicou - byte degree[8] = - { - B01100, - B10010, - B10010, - B01100, - B00000, - B00000, - B00000, - B00000 - }; - byte thermometer[8] = - { - B00100, - B01010, - B01010, - B01010, - B01010, - B10001, - B10001, - B01110 - }; - byte uplevel[8]={ - B00100, - B01110, - B11111, - B00100, - B11100, - B00000, - B00000, - B00000 - }; //thanks joris - byte refresh[8]={ - B00000, - B00110, - B11001, - B11000, - B00011, - B10011, - B01100, - B00000, - }; //thanks joris - byte folder [8]={ - B00000, - B11100, - B11111, - B10001, - B10001, - B11111, - B00000, - B00000 - }; //thanks joris - byte feedrate [8]={ - B11100, - B10000, - B11000, - B10111, - B00101, - B00110, - B00101, - B00000 - }; //thanks Sonny Mounicou - byte clock [8]={ - B00000, - B01110, - B10011, - B10101, - B10001, - B01110, - B00000, - B00000 - }; //thanks Sonny Mounicou - -#if defined(LCDI2C_TYPE_PCF8575) - lcd.begin(LCD_WIDTH, LCD_HEIGHT); - #ifdef LCD_I2C_PIN_BL - lcd.setBacklightPin(LCD_I2C_PIN_BL,POSITIVE); - lcd.setBacklight(HIGH); - #endif - -#elif defined(LCD_I2C_TYPE_MCP23017) - lcd.setMCPType(LTI_TYPE_MCP23017); - lcd.begin(LCD_WIDTH, LCD_HEIGHT); - lcd.setBacklight(0); //set all the LEDs off to begin with - -#elif defined(LCD_I2C_TYPE_MCP23008) - lcd.setMCPType(LTI_TYPE_MCP23008); - lcd.begin(LCD_WIDTH, LCD_HEIGHT); - -#elif defined(LCD_I2C_TYPE_PCA8574) - lcd.init(); - lcd.backlight(); - -#else - lcd.begin(LCD_WIDTH, LCD_HEIGHT); -#endif - - lcd.createChar(LCD_STR_BEDTEMP[0], bedTemp); - lcd.createChar(LCD_STR_DEGREE[0], degree); - lcd.createChar(LCD_STR_THERMOMETER[0], thermometer); - lcd.createChar(LCD_STR_UPLEVEL[0], uplevel); - lcd.createChar(LCD_STR_REFRESH[0], refresh); - lcd.createChar(LCD_STR_FOLDER[0], folder); - lcd.createChar(LCD_STR_FEEDRATE[0], feedrate); - lcd.createChar(LCD_STR_CLOCK[0], clock); - lcd.clear(); -} -static void lcd_implementation_clear() -{ - lcd.clear(); -} -/* Arduino < 1.0.0 is missing a function to print PROGMEM strings, so we need to implement our own */ -static void lcd_printPGM(const char* str) -{ - char c; - while((c = pgm_read_byte(str++)) != '\0') - { - lcd.write(c); - } -} -/* -Possible status screens: -16x2 |0123456789012345| - |000/000 B000/000| - |Status line.....| - -16x4 |0123456789012345| - |000/000 B000/000| - |SD100% Z000.0| - |F100% T--:--| - |Status line.....| - -20x2 |01234567890123456789| - |T000/000D B000/000D | - |Status line.........| - -20x4 |01234567890123456789| - |T000/000D B000/000D | - |X+000.0 Y+000.0 Z+000.0| - |F100% SD100% T--:--| - |Status line.........| - -20x4 |01234567890123456789| - |T000/000D B000/000D | - |T000/000D Z000.0| - |F100% SD100% T--:--| - |Status line.........| -*/ -static void lcd_implementation_status_screen() -{ - int tHotend=int(degHotend(0) + 0.5); - int tTarget=int(degTargetHotend(0) + 0.5); - -#if LCD_WIDTH < 20 - lcd.setCursor(0, 0); - lcd.print(itostr3(tHotend)); - lcd.print('/'); - lcd.print(itostr3left(tTarget)); - -# if EXTRUDERS > 1 || TEMP_SENSOR_BED != 0 - //If we have an 2nd extruder or heated bed, show that in the top right corner - lcd.setCursor(8, 0); -# if EXTRUDERS > 1 - tHotend = int(degHotend(1) + 0.5); - tTarget = int(degTargetHotend(1) + 0.5); - lcd.print(LCD_STR_THERMOMETER[0]); -# else//Heated bed - tHotend=int(degBed() + 0.5); - tTarget=int(degTargetBed() + 0.5); - lcd.print(LCD_STR_BEDTEMP[0]); -# endif - lcd.print(itostr3(tHotend)); - lcd.print('/'); - lcd.print(itostr3left(tTarget)); -# endif//EXTRUDERS > 1 || TEMP_SENSOR_BED != 0 - -#else//LCD_WIDTH > 19 - lcd.setCursor(0, 0); - lcd.print(LCD_STR_THERMOMETER[0]); - lcd.print(itostr3(tHotend)); - lcd.print('/'); - lcd.print(itostr3left(tTarget)); - lcd_printPGM(PSTR(LCD_STR_DEGREE " ")); - if (tTarget < 10) - lcd.print(' '); - -# if EXTRUDERS > 1 || TEMP_SENSOR_BED != 0 - //If we have an 2nd extruder or heated bed, show that in the top right corner - lcd.setCursor(10, 0); -# if EXTRUDERS > 1 - tHotend = int(degHotend(1) + 0.5); - tTarget = int(degTargetHotend(1) + 0.5); - lcd.print(LCD_STR_THERMOMETER[0]); -# else//Heated bed - tHotend=int(degBed() + 0.5); - tTarget=int(degTargetBed() + 0.5); - lcd.print(LCD_STR_BEDTEMP[0]); -# endif - lcd.print(itostr3(tHotend)); - lcd.print('/'); - lcd.print(itostr3left(tTarget)); - lcd_printPGM(PSTR(LCD_STR_DEGREE " ")); - if (tTarget < 10) - lcd.print(' '); -# endif//EXTRUDERS > 1 || TEMP_SENSOR_BED != 0 -#endif//LCD_WIDTH > 19 - -#if LCD_HEIGHT > 2 -//Lines 2 for 4 line LCD -# if LCD_WIDTH < 20 -# ifdef SDSUPPORT - lcd.setCursor(0, 2); - lcd_printPGM(PSTR("SD")); - if (IS_SD_PRINTING) - lcd.print(itostr3(card.percentDone())); - else - lcd_printPGM(PSTR("---")); - lcd.print('%'); -# endif//SDSUPPORT -# else//LCD_WIDTH > 19 -# if EXTRUDERS > 1 && TEMP_SENSOR_BED != 0 - //If we both have a 2nd extruder and a heated bed, show the heated bed temp on the 2nd line on the left, as the first line is filled with extruder temps - tHotend=int(degBed() + 0.5); - tTarget=int(degTargetBed() + 0.5); - - lcd.setCursor(0, 1); - lcd.print(LCD_STR_BEDTEMP[0]); - lcd.print(itostr3(tHotend)); - lcd.print('/'); - lcd.print(itostr3left(tTarget)); - lcd_printPGM(PSTR(LCD_STR_DEGREE " ")); - if (tTarget < 10) - lcd.print(' '); -# else - lcd.setCursor(0,1); - lcd.print('X'); - lcd.print(ftostr3(current_position[X_AXIS])); - lcd_printPGM(PSTR(" Y")); - lcd.print(ftostr3(current_position[Y_AXIS])); -# endif//EXTRUDERS > 1 || TEMP_SENSOR_BED != 0 -# endif//LCD_WIDTH > 19 - lcd.setCursor(LCD_WIDTH - 8, 1); - lcd.print('Z'); - lcd.print(ftostr32(current_position[Z_AXIS])); -#endif//LCD_HEIGHT > 2 - -#if LCD_HEIGHT > 3 - lcd.setCursor(0, 2); - lcd.print(LCD_STR_FEEDRATE[0]); - lcd.print(itostr3(feedmultiply)); - lcd.print('%'); -# if LCD_WIDTH > 19 -# ifdef SDSUPPORT - lcd.setCursor(7, 2); - lcd_printPGM(PSTR("SD")); - if (IS_SD_PRINTING) - lcd.print(itostr3(card.percentDone())); - else - lcd_printPGM(PSTR("---")); - lcd.print('%'); -# endif//SDSUPPORT -# endif//LCD_WIDTH > 19 - lcd.setCursor(LCD_WIDTH - 6, 2); - lcd.print(LCD_STR_CLOCK[0]); - if(starttime != 0) - { - uint16_t time = millis()/60000 - starttime/60000; - lcd.print(itostr2(time/60)); - lcd.print(':'); - lcd.print(itostr2(time%60)); - }else{ - lcd_printPGM(PSTR("--:--")); - } -#endif - - //Status message line on the last line - lcd.setCursor(0, LCD_HEIGHT - 1); - lcd.print(lcd_status_message); -} -static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, char pre_char, char post_char) -{ - char c; - //Use all characters in narrow LCDs - #if LCD_WIDTH < 20 - uint8_t n = LCD_WIDTH - 1 - 1; - #else - uint8_t n = LCD_WIDTH - 1 - 2; - #endif - lcd.setCursor(0, row); - lcd.print(pre_char); - while( ((c = pgm_read_byte(pstr)) != '\0') && (n>0) ) - { - lcd.print(c); - pstr++; - n--; - } - while(n--) - lcd.print(' '); - lcd.print(post_char); - lcd.print(' '); -} -static void lcd_implementation_drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char pre_char, char* data) -{ - char c; - //Use all characters in narrow LCDs - #if LCD_WIDTH < 20 - uint8_t n = LCD_WIDTH - 1 - 1 - strlen(data); - #else - uint8_t n = LCD_WIDTH - 1 - 2 - strlen(data); - #endif - lcd.setCursor(0, row); - lcd.print(pre_char); - while( ((c = pgm_read_byte(pstr)) != '\0') && (n>0) ) - { - lcd.print(c); - pstr++; - n--; - } - lcd.print(':'); - while(n--) - lcd.print(' '); - lcd.print(data); -} -static void lcd_implementation_drawmenu_setting_edit_generic_P(uint8_t row, const char* pstr, char pre_char, const char* data) -{ - char c; - //Use all characters in narrow LCDs - #if LCD_WIDTH < 20 - uint8_t n = LCD_WIDTH - 1 - 1 - strlen_P(data); - #else - uint8_t n = LCD_WIDTH - 1 - 2 - strlen_P(data); - #endif - lcd.setCursor(0, row); - lcd.print(pre_char); - while( ((c = pgm_read_byte(pstr)) != '\0') && (n>0) ) - { - lcd.print(c); - pstr++; - n--; - } - lcd.print(':'); - while(n--) - lcd.print(' '); - lcd_printPGM(data); -} -#define lcd_implementation_drawmenu_setting_edit_int3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', itostr3(*(data))) -#define lcd_implementation_drawmenu_setting_edit_int3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', itostr3(*(data))) -#define lcd_implementation_drawmenu_setting_edit_float3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr3(*(data))) -#define lcd_implementation_drawmenu_setting_edit_float3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data))) -#define lcd_implementation_drawmenu_setting_edit_float32_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data))) -#define lcd_implementation_drawmenu_setting_edit_float32(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data))) -#define lcd_implementation_drawmenu_setting_edit_float5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data))) -#define lcd_implementation_drawmenu_setting_edit_float5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data))) -#define lcd_implementation_drawmenu_setting_edit_float52_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data))) -#define lcd_implementation_drawmenu_setting_edit_float52(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr52(*(data))) -#define lcd_implementation_drawmenu_setting_edit_float51_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr51(*(data))) -#define lcd_implementation_drawmenu_setting_edit_float51(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr51(*(data))) -#define lcd_implementation_drawmenu_setting_edit_long5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data))) -#define lcd_implementation_drawmenu_setting_edit_long5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data))) -#define lcd_implementation_drawmenu_setting_edit_bool_selected(row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF)) -#define lcd_implementation_drawmenu_setting_edit_bool(row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF)) - -//Add version for callback functions -#define lcd_implementation_drawmenu_setting_edit_callback_int3_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', itostr3(*(data))) -#define lcd_implementation_drawmenu_setting_edit_callback_int3(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', itostr3(*(data))) -#define lcd_implementation_drawmenu_setting_edit_callback_float3_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr3(*(data))) -#define lcd_implementation_drawmenu_setting_edit_callback_float3(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data))) -#define lcd_implementation_drawmenu_setting_edit_callback_float32_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data))) -#define lcd_implementation_drawmenu_setting_edit_callback_float32(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data))) -#define lcd_implementation_drawmenu_setting_edit_callback_float5_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data))) -#define lcd_implementation_drawmenu_setting_edit_callback_float5(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data))) -#define lcd_implementation_drawmenu_setting_edit_callback_float52_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data))) -#define lcd_implementation_drawmenu_setting_edit_callback_float52(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr52(*(data))) -#define lcd_implementation_drawmenu_setting_edit_callback_float51_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr51(*(data))) -#define lcd_implementation_drawmenu_setting_edit_callback_float51(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr51(*(data))) -#define lcd_implementation_drawmenu_setting_edit_callback_long5_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data))) -#define lcd_implementation_drawmenu_setting_edit_callback_long5(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data))) -#define lcd_implementation_drawmenu_setting_edit_callback_bool_selected(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF)) -#define lcd_implementation_drawmenu_setting_edit_callback_bool(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF)) - - -void lcd_implementation_drawedit(const char* pstr, char* value) -{ - lcd.setCursor(1, 1); - lcd_printPGM(pstr); - lcd.print(':'); - #if LCD_WIDTH < 20 - lcd.setCursor(LCD_WIDTH - strlen(value), 1); - #else - lcd.setCursor(LCD_WIDTH -1 - strlen(value), 1); - #endif - lcd.print(value); -} -static void lcd_implementation_drawmenu_sdfile_selected(uint8_t row, const char* pstr, const char* filename, char* longFilename) -{ - char c; - uint8_t n = LCD_WIDTH - 1; - lcd.setCursor(0, row); - lcd.print('>'); - if (longFilename[0] != '\0') - { - filename = longFilename; - longFilename[LCD_WIDTH-1] = '\0'; - } - while( ((c = *filename) != '\0') && (n>0) ) - { - lcd.print(c); - filename++; - n--; - } - while(n--) - lcd.print(' '); -} -static void lcd_implementation_drawmenu_sdfile(uint8_t row, const char* pstr, const char* filename, char* longFilename) -{ - char c; - uint8_t n = LCD_WIDTH - 1; - lcd.setCursor(0, row); - lcd.print(' '); - if (longFilename[0] != '\0') - { - filename = longFilename; - longFilename[LCD_WIDTH-1] = '\0'; - } - while( ((c = *filename) != '\0') && (n>0) ) - { - lcd.print(c); - filename++; - n--; - } - while(n--) - lcd.print(' '); -} -static void lcd_implementation_drawmenu_sddirectory_selected(uint8_t row, const char* pstr, const char* filename, char* longFilename) -{ - char c; - uint8_t n = LCD_WIDTH - 2; - lcd.setCursor(0, row); - lcd.print('>'); - lcd.print(LCD_STR_FOLDER[0]); - if (longFilename[0] != '\0') - { - filename = longFilename; - longFilename[LCD_WIDTH-2] = '\0'; - } - while( ((c = *filename) != '\0') && (n>0) ) - { - lcd.print(c); - filename++; - n--; - } - while(n--) - lcd.print(' '); -} -static void lcd_implementation_drawmenu_sddirectory(uint8_t row, const char* pstr, const char* filename, char* longFilename) -{ - char c; - uint8_t n = LCD_WIDTH - 2; - lcd.setCursor(0, row); - lcd.print(' '); - lcd.print(LCD_STR_FOLDER[0]); - if (longFilename[0] != '\0') - { - filename = longFilename; - longFilename[LCD_WIDTH-2] = '\0'; - } - while( ((c = *filename) != '\0') && (n>0) ) - { - lcd.print(c); - filename++; - n--; - } - while(n--) - lcd.print(' '); -} -#define lcd_implementation_drawmenu_back_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, LCD_STR_UPLEVEL[0], LCD_STR_UPLEVEL[0]) -#define lcd_implementation_drawmenu_back(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', LCD_STR_UPLEVEL[0]) -#define lcd_implementation_drawmenu_submenu_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', LCD_STR_ARROW_RIGHT[0]) -#define lcd_implementation_drawmenu_submenu(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', LCD_STR_ARROW_RIGHT[0]) -#define lcd_implementation_drawmenu_gcode_selected(row, pstr, gcode) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ') -#define lcd_implementation_drawmenu_gcode(row, pstr, gcode) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ') -#define lcd_implementation_drawmenu_function_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ') -#define lcd_implementation_drawmenu_function(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ') - -static void lcd_implementation_quick_feedback() -{ -#ifdef LCD_USE_I2C_BUZZER - lcd.buzz(60,1000/6); -#elif defined(BEEPER) && BEEPER > -1 - SET_OUTPUT(BEEPER); - for(int8_t i=0;i<10;i++) - { - WRITE(BEEPER,HIGH); - delay(3); - WRITE(BEEPER,LOW); - delay(3); - } -#endif -} - -#ifdef LCD_HAS_STATUS_INDICATORS -static void lcd_implementation_update_indicators() -{ - #if defined(LCD_I2C_PANELOLU2) || defined(LCD_I2C_VIKI) - //set the LEDS - referred to as backlights by the LiquidTWI2 library - static uint8_t ledsprev = 0; - uint8_t leds = 0; - if (target_temperature_bed > 0) leds |= LED_A; - if (target_temperature[0] > 0) leds |= LED_B; - if (fanSpeed) leds |= LED_C; - #if EXTRUDERS > 1 - if (target_temperature[1] > 0) leds |= LED_C; - #endif - if (leds != ledsprev) { - lcd.setBacklight(leds); - ledsprev = leds; - } - #endif -} -#endif - -#ifdef LCD_HAS_SLOW_BUTTONS -static uint8_t lcd_implementation_read_slow_buttons() -{ - #ifdef LCD_I2C_TYPE_MCP23017 - // Reading these buttons this is likely to be too slow to call inside interrupt context - // so they are called during normal lcd_update - return lcd.readButtons() << B_I2C_BTN_OFFSET; - #endif -} -#endif - -#endif//ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H +#ifndef ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H +#define ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H + +/** +* Implementation of the LCD display routines for a hitachi HD44780 display. These are common LCD character displays. +* When selecting the rusian language, a slightly different LCD implementation is used to handle UTF8 characters. +**/ + +#ifndef REPRAPWORLD_KEYPAD +extern volatile uint8_t buttons; //the last checked buttons in a bit array. +#else +extern volatile uint16_t buttons; //an extended version of the last checked buttons in a bit array. +#endif + +//////////////////////////////////// +// Setup button and encode mappings for each panel (into 'buttons' variable +// +// This is just to map common functions (across different panels) onto the same +// macro name. The mapping is independent of whether the button is directly connected or +// via a shift/i2c register. + +#ifdef ULTIPANEL +// All Ultipanels might have an encoder - so this is always be mapped onto first two bits +#define BLEN_B 1 +#define BLEN_A 0 + +#define EN_B (1< -1 + // encoder click is directly connected + #define BLEN_C 2 + #define EN_C (1< -1 + // the pause/stop/restart button is connected to BTN_ENC when used + #define B_ST (EN_C) // Map the pause/stop/resume button into its normalized functional name + #define LCD_CLICKED (buttons&(B_MI|B_RI|B_ST)) // pause/stop button also acts as click until we implement proper pause/stop. + #else + #define LCD_CLICKED (buttons&(B_MI|B_RI)) + #endif + + // I2C buttons take too long to read inside an interrupt context and so we read them during lcd_update + #define LCD_HAS_SLOW_BUTTONS + +#elif defined(LCD_I2C_PANELOLU2) + // encoder click can be read through I2C if not directly connected + #if BTN_ENC <= 0 + #define B_I2C_BTN_OFFSET 3 // (the first three bit positions reserved for EN_A, EN_B, EN_C) + + #define B_MI (PANELOLU2_ENCODER_C< + #include + #include + #define LCD_CLASS LiquidCrystal_I2C + LCD_CLASS lcd(LCD_I2C_ADDRESS,LCD_I2C_PIN_EN,LCD_I2C_PIN_RW,LCD_I2C_PIN_RS,LCD_I2C_PIN_D4,LCD_I2C_PIN_D5,LCD_I2C_PIN_D6,LCD_I2C_PIN_D7); + +#elif defined(LCD_I2C_TYPE_MCP23017) + //for the LED indicators (which maybe mapped to different things in lcd_implementation_update_indicators()) + #define LED_A 0x04 //100 + #define LED_B 0x02 //010 + #define LED_C 0x01 //001 + + #define LCD_HAS_STATUS_INDICATORS + + #include + #include + #define LCD_CLASS LiquidTWI2 + LCD_CLASS lcd(LCD_I2C_ADDRESS); + +#elif defined(LCD_I2C_TYPE_MCP23008) + #include + #include + #define LCD_CLASS LiquidTWI2 + LCD_CLASS lcd(LCD_I2C_ADDRESS); + +#elif defined(LCD_I2C_TYPE_PCA8574) + #include + #define LCD_CLASS LiquidCrystal_I2C + LCD_CLASS lcd(LCD_I2C_ADDRESS, LCD_WIDTH, LCD_HEIGHT); + +#else + // Standard directly connected LCD implementations + #if LANGUAGE_CHOICE == 6 + #include "LiquidCrystalRus.h" + #define LCD_CLASS LiquidCrystalRus + #else + #include + #define LCD_CLASS LiquidCrystal + #endif + LCD_CLASS lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7); //RS,Enable,D4,D5,D6,D7 +#endif + +/* Custom characters defined in the first 8 characters of the LCD */ +#define LCD_STR_BEDTEMP "\x00" +#define LCD_STR_DEGREE "\x01" +#define LCD_STR_THERMOMETER "\x02" +#define LCD_STR_UPLEVEL "\x03" +#define LCD_STR_REFRESH "\x04" +#define LCD_STR_FOLDER "\x05" +#define LCD_STR_FEEDRATE "\x06" +#define LCD_STR_CLOCK "\x07" +#define LCD_STR_ARROW_RIGHT "\x7E" /* from the default character set */ + +static void lcd_implementation_init() +{ + byte bedTemp[8] = + { + B00000, + B11111, + B10101, + B10001, + B10101, + B11111, + B00000, + B00000 + }; //thanks Sonny Mounicou + byte degree[8] = + { + B01100, + B10010, + B10010, + B01100, + B00000, + B00000, + B00000, + B00000 + }; + byte thermometer[8] = + { + B00100, + B01010, + B01010, + B01010, + B01010, + B10001, + B10001, + B01110 + }; + byte uplevel[8]={ + B00100, + B01110, + B11111, + B00100, + B11100, + B00000, + B00000, + B00000 + }; //thanks joris + byte refresh[8]={ + B00000, + B00110, + B11001, + B11000, + B00011, + B10011, + B01100, + B00000, + }; //thanks joris + byte folder [8]={ + B00000, + B11100, + B11111, + B10001, + B10001, + B11111, + B00000, + B00000 + }; //thanks joris + byte feedrate [8]={ + B11100, + B10000, + B11000, + B10111, + B00101, + B00110, + B00101, + B00000 + }; //thanks Sonny Mounicou + byte clock [8]={ + B00000, + B01110, + B10011, + B10101, + B10001, + B01110, + B00000, + B00000 + }; //thanks Sonny Mounicou + +#if defined(LCDI2C_TYPE_PCF8575) + lcd.begin(LCD_WIDTH, LCD_HEIGHT); + #ifdef LCD_I2C_PIN_BL + lcd.setBacklightPin(LCD_I2C_PIN_BL,POSITIVE); + lcd.setBacklight(HIGH); + #endif + +#elif defined(LCD_I2C_TYPE_MCP23017) + lcd.setMCPType(LTI_TYPE_MCP23017); + lcd.begin(LCD_WIDTH, LCD_HEIGHT); + lcd.setBacklight(0); //set all the LEDs off to begin with + +#elif defined(LCD_I2C_TYPE_MCP23008) + lcd.setMCPType(LTI_TYPE_MCP23008); + lcd.begin(LCD_WIDTH, LCD_HEIGHT); + +#elif defined(LCD_I2C_TYPE_PCA8574) + lcd.init(); + lcd.backlight(); + +#else + lcd.begin(LCD_WIDTH, LCD_HEIGHT); +#endif + + lcd.createChar(LCD_STR_BEDTEMP[0], bedTemp); + lcd.createChar(LCD_STR_DEGREE[0], degree); + lcd.createChar(LCD_STR_THERMOMETER[0], thermometer); + lcd.createChar(LCD_STR_UPLEVEL[0], uplevel); + lcd.createChar(LCD_STR_REFRESH[0], refresh); + lcd.createChar(LCD_STR_FOLDER[0], folder); + lcd.createChar(LCD_STR_FEEDRATE[0], feedrate); + lcd.createChar(LCD_STR_CLOCK[0], clock); + lcd.clear(); +} +static void lcd_implementation_clear() +{ + lcd.clear(); +} +/* Arduino < 1.0.0 is missing a function to print PROGMEM strings, so we need to implement our own */ +static void lcd_printPGM(const char* str) +{ + char c; + while((c = pgm_read_byte(str++)) != '\0') + { + lcd.write(c); + } +} +/* +Possible status screens: +16x2 |0123456789012345| + |000/000 B000/000| + |Status line.....| + +16x4 |0123456789012345| + |000/000 B000/000| + |SD100% Z000.0| + |F100% T--:--| + |Status line.....| + +20x2 |01234567890123456789| + |T000/000D B000/000D | + |Status line.........| + +20x4 |01234567890123456789| + |T000/000D B000/000D | + |X+000.0 Y+000.0 Z+000.0| + |F100% SD100% T--:--| + |Status line.........| + +20x4 |01234567890123456789| + |T000/000D B000/000D | + |T000/000D Z000.0| + |F100% SD100% T--:--| + |Status line.........| +*/ +static void lcd_implementation_status_screen() +{ + int tHotend=int(degHotend(0) + 0.5); + int tTarget=int(degTargetHotend(0) + 0.5); + +#if LCD_WIDTH < 20 + lcd.setCursor(0, 0); + lcd.print(itostr3(tHotend)); + lcd.print('/'); + lcd.print(itostr3left(tTarget)); + +# if EXTRUDERS > 1 || TEMP_SENSOR_BED != 0 + //If we have an 2nd extruder or heated bed, show that in the top right corner + lcd.setCursor(8, 0); +# if EXTRUDERS > 1 + tHotend = int(degHotend(1) + 0.5); + tTarget = int(degTargetHotend(1) + 0.5); + lcd.print(LCD_STR_THERMOMETER[0]); +# else//Heated bed + tHotend=int(degBed() + 0.5); + tTarget=int(degTargetBed() + 0.5); + lcd.print(LCD_STR_BEDTEMP[0]); +# endif + lcd.print(itostr3(tHotend)); + lcd.print('/'); + lcd.print(itostr3left(tTarget)); +# endif//EXTRUDERS > 1 || TEMP_SENSOR_BED != 0 + +#else//LCD_WIDTH > 19 + lcd.setCursor(0, 0); + lcd.print(LCD_STR_THERMOMETER[0]); + lcd.print(itostr3(tHotend)); + lcd.print('/'); + lcd.print(itostr3left(tTarget)); + lcd_printPGM(PSTR(LCD_STR_DEGREE " ")); + if (tTarget < 10) + lcd.print(' '); + +# if EXTRUDERS > 1 || TEMP_SENSOR_BED != 0 + //If we have an 2nd extruder or heated bed, show that in the top right corner + lcd.setCursor(10, 0); +# if EXTRUDERS > 1 + tHotend = int(degHotend(1) + 0.5); + tTarget = int(degTargetHotend(1) + 0.5); + lcd.print(LCD_STR_THERMOMETER[0]); +# else//Heated bed + tHotend=int(degBed() + 0.5); + tTarget=int(degTargetBed() + 0.5); + lcd.print(LCD_STR_BEDTEMP[0]); +# endif + lcd.print(itostr3(tHotend)); + lcd.print('/'); + lcd.print(itostr3left(tTarget)); + lcd_printPGM(PSTR(LCD_STR_DEGREE " ")); + if (tTarget < 10) + lcd.print(' '); +# endif//EXTRUDERS > 1 || TEMP_SENSOR_BED != 0 +#endif//LCD_WIDTH > 19 + +#if LCD_HEIGHT > 2 +//Lines 2 for 4 line LCD +# if LCD_WIDTH < 20 +# ifdef SDSUPPORT + lcd.setCursor(0, 2); + lcd_printPGM(PSTR("SD")); + if (IS_SD_PRINTING) + lcd.print(itostr3(card.percentDone())); + else + lcd_printPGM(PSTR("---")); + lcd.print('%'); +# endif//SDSUPPORT +# else//LCD_WIDTH > 19 +# if EXTRUDERS > 1 && TEMP_SENSOR_BED != 0 + //If we both have a 2nd extruder and a heated bed, show the heated bed temp on the 2nd line on the left, as the first line is filled with extruder temps + tHotend=int(degBed() + 0.5); + tTarget=int(degTargetBed() + 0.5); + + lcd.setCursor(0, 1); + lcd.print(LCD_STR_BEDTEMP[0]); + lcd.print(itostr3(tHotend)); + lcd.print('/'); + lcd.print(itostr3left(tTarget)); + lcd_printPGM(PSTR(LCD_STR_DEGREE " ")); + if (tTarget < 10) + lcd.print(' '); +# else + lcd.setCursor(0,1); + lcd.print('X'); + lcd.print(ftostr3(current_position[X_AXIS])); + lcd_printPGM(PSTR(" Y")); + lcd.print(ftostr3(current_position[Y_AXIS])); +# endif//EXTRUDERS > 1 || TEMP_SENSOR_BED != 0 +# endif//LCD_WIDTH > 19 + lcd.setCursor(LCD_WIDTH - 8, 1); + lcd.print('Z'); + lcd.print(ftostr32(current_position[Z_AXIS])); +#endif//LCD_HEIGHT > 2 + +#if LCD_HEIGHT > 3 + lcd.setCursor(0, 2); + lcd.print(LCD_STR_FEEDRATE[0]); + lcd.print(itostr3(feedmultiply)); + lcd.print('%'); +# if LCD_WIDTH > 19 +# ifdef SDSUPPORT + lcd.setCursor(7, 2); + lcd_printPGM(PSTR("SD")); + if (IS_SD_PRINTING) + lcd.print(itostr3(card.percentDone())); + else + lcd_printPGM(PSTR("---")); + lcd.print('%'); +# endif//SDSUPPORT +# endif//LCD_WIDTH > 19 + lcd.setCursor(LCD_WIDTH - 6, 2); + lcd.print(LCD_STR_CLOCK[0]); + if(starttime != 0) + { + uint16_t time = millis()/60000 - starttime/60000; + lcd.print(itostr2(time/60)); + lcd.print(':'); + lcd.print(itostr2(time%60)); + }else{ + lcd_printPGM(PSTR("--:--")); + } +#endif + + //Status message line on the last line + lcd.setCursor(0, LCD_HEIGHT - 1); + lcd.print(lcd_status_message); +} +static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, char pre_char, char post_char) +{ + char c; + //Use all characters in narrow LCDs + #if LCD_WIDTH < 20 + uint8_t n = LCD_WIDTH - 1 - 1; + #else + uint8_t n = LCD_WIDTH - 1 - 2; + #endif + lcd.setCursor(0, row); + lcd.print(pre_char); + while( ((c = pgm_read_byte(pstr)) != '\0') && (n>0) ) + { + lcd.print(c); + pstr++; + n--; + } + while(n--) + lcd.print(' '); + lcd.print(post_char); + lcd.print(' '); +} +static void lcd_implementation_drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char pre_char, char* data) +{ + char c; + //Use all characters in narrow LCDs + #if LCD_WIDTH < 20 + uint8_t n = LCD_WIDTH - 1 - 1 - strlen(data); + #else + uint8_t n = LCD_WIDTH - 1 - 2 - strlen(data); + #endif + lcd.setCursor(0, row); + lcd.print(pre_char); + while( ((c = pgm_read_byte(pstr)) != '\0') && (n>0) ) + { + lcd.print(c); + pstr++; + n--; + } + lcd.print(':'); + while(n--) + lcd.print(' '); + lcd.print(data); +} +static void lcd_implementation_drawmenu_setting_edit_generic_P(uint8_t row, const char* pstr, char pre_char, const char* data) +{ + char c; + //Use all characters in narrow LCDs + #if LCD_WIDTH < 20 + uint8_t n = LCD_WIDTH - 1 - 1 - strlen_P(data); + #else + uint8_t n = LCD_WIDTH - 1 - 2 - strlen_P(data); + #endif + lcd.setCursor(0, row); + lcd.print(pre_char); + while( ((c = pgm_read_byte(pstr)) != '\0') && (n>0) ) + { + lcd.print(c); + pstr++; + n--; + } + lcd.print(':'); + while(n--) + lcd.print(' '); + lcd_printPGM(data); +} +#define lcd_implementation_drawmenu_setting_edit_int3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', itostr3(*(data))) +#define lcd_implementation_drawmenu_setting_edit_int3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', itostr3(*(data))) +#define lcd_implementation_drawmenu_setting_edit_float3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr3(*(data))) +#define lcd_implementation_drawmenu_setting_edit_float3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data))) +#define lcd_implementation_drawmenu_setting_edit_float32_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data))) +#define lcd_implementation_drawmenu_setting_edit_float32(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data))) +#define lcd_implementation_drawmenu_setting_edit_float5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data))) +#define lcd_implementation_drawmenu_setting_edit_float5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data))) +#define lcd_implementation_drawmenu_setting_edit_float52_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data))) +#define lcd_implementation_drawmenu_setting_edit_float52(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr52(*(data))) +#define lcd_implementation_drawmenu_setting_edit_float51_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr51(*(data))) +#define lcd_implementation_drawmenu_setting_edit_float51(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr51(*(data))) +#define lcd_implementation_drawmenu_setting_edit_long5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data))) +#define lcd_implementation_drawmenu_setting_edit_long5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data))) +#define lcd_implementation_drawmenu_setting_edit_bool_selected(row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF)) +#define lcd_implementation_drawmenu_setting_edit_bool(row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF)) + +//Add version for callback functions +#define lcd_implementation_drawmenu_setting_edit_callback_int3_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', itostr3(*(data))) +#define lcd_implementation_drawmenu_setting_edit_callback_int3(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', itostr3(*(data))) +#define lcd_implementation_drawmenu_setting_edit_callback_float3_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr3(*(data))) +#define lcd_implementation_drawmenu_setting_edit_callback_float3(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data))) +#define lcd_implementation_drawmenu_setting_edit_callback_float32_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data))) +#define lcd_implementation_drawmenu_setting_edit_callback_float32(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data))) +#define lcd_implementation_drawmenu_setting_edit_callback_float5_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data))) +#define lcd_implementation_drawmenu_setting_edit_callback_float5(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data))) +#define lcd_implementation_drawmenu_setting_edit_callback_float52_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data))) +#define lcd_implementation_drawmenu_setting_edit_callback_float52(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr52(*(data))) +#define lcd_implementation_drawmenu_setting_edit_callback_float51_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr51(*(data))) +#define lcd_implementation_drawmenu_setting_edit_callback_float51(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr51(*(data))) +#define lcd_implementation_drawmenu_setting_edit_callback_long5_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data))) +#define lcd_implementation_drawmenu_setting_edit_callback_long5(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data))) +#define lcd_implementation_drawmenu_setting_edit_callback_bool_selected(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF)) +#define lcd_implementation_drawmenu_setting_edit_callback_bool(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF)) + + +void lcd_implementation_drawedit(const char* pstr, char* value) +{ + lcd.setCursor(1, 1); + lcd_printPGM(pstr); + lcd.print(':'); + #if LCD_WIDTH < 20 + lcd.setCursor(LCD_WIDTH - strlen(value), 1); + #else + lcd.setCursor(LCD_WIDTH -1 - strlen(value), 1); + #endif + lcd.print(value); +} +static void lcd_implementation_drawmenu_sdfile_selected(uint8_t row, const char* pstr, const char* filename, char* longFilename) +{ + char c; + uint8_t n = LCD_WIDTH - 1; + lcd.setCursor(0, row); + lcd.print('>'); + if (longFilename[0] != '\0') + { + filename = longFilename; + longFilename[LCD_WIDTH-1] = '\0'; + } + while( ((c = *filename) != '\0') && (n>0) ) + { + lcd.print(c); + filename++; + n--; + } + while(n--) + lcd.print(' '); +} +static void lcd_implementation_drawmenu_sdfile(uint8_t row, const char* pstr, const char* filename, char* longFilename) +{ + char c; + uint8_t n = LCD_WIDTH - 1; + lcd.setCursor(0, row); + lcd.print(' '); + if (longFilename[0] != '\0') + { + filename = longFilename; + longFilename[LCD_WIDTH-1] = '\0'; + } + while( ((c = *filename) != '\0') && (n>0) ) + { + lcd.print(c); + filename++; + n--; + } + while(n--) + lcd.print(' '); +} +static void lcd_implementation_drawmenu_sddirectory_selected(uint8_t row, const char* pstr, const char* filename, char* longFilename) +{ + char c; + uint8_t n = LCD_WIDTH - 2; + lcd.setCursor(0, row); + lcd.print('>'); + lcd.print(LCD_STR_FOLDER[0]); + if (longFilename[0] != '\0') + { + filename = longFilename; + longFilename[LCD_WIDTH-2] = '\0'; + } + while( ((c = *filename) != '\0') && (n>0) ) + { + lcd.print(c); + filename++; + n--; + } + while(n--) + lcd.print(' '); +} +static void lcd_implementation_drawmenu_sddirectory(uint8_t row, const char* pstr, const char* filename, char* longFilename) +{ + char c; + uint8_t n = LCD_WIDTH - 2; + lcd.setCursor(0, row); + lcd.print(' '); + lcd.print(LCD_STR_FOLDER[0]); + if (longFilename[0] != '\0') + { + filename = longFilename; + longFilename[LCD_WIDTH-2] = '\0'; + } + while( ((c = *filename) != '\0') && (n>0) ) + { + lcd.print(c); + filename++; + n--; + } + while(n--) + lcd.print(' '); +} +#define lcd_implementation_drawmenu_back_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, LCD_STR_UPLEVEL[0], LCD_STR_UPLEVEL[0]) +#define lcd_implementation_drawmenu_back(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', LCD_STR_UPLEVEL[0]) +#define lcd_implementation_drawmenu_submenu_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', LCD_STR_ARROW_RIGHT[0]) +#define lcd_implementation_drawmenu_submenu(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', LCD_STR_ARROW_RIGHT[0]) +#define lcd_implementation_drawmenu_gcode_selected(row, pstr, gcode) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ') +#define lcd_implementation_drawmenu_gcode(row, pstr, gcode) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ') +#define lcd_implementation_drawmenu_function_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ') +#define lcd_implementation_drawmenu_function(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ') + +static void lcd_implementation_quick_feedback() +{ +#ifdef LCD_USE_I2C_BUZZER + lcd.buzz(60,1000/6); +#elif defined(BEEPER) && BEEPER > -1 + SET_OUTPUT(BEEPER); + for(int8_t i=0;i<10;i++) + { + WRITE(BEEPER,HIGH); + delayMicroseconds(100); + WRITE(BEEPER,LOW); + delayMicroseconds(100); + } +#endif +} + +#ifdef LCD_HAS_STATUS_INDICATORS +static void lcd_implementation_update_indicators() +{ + #if defined(LCD_I2C_PANELOLU2) || defined(LCD_I2C_VIKI) + //set the LEDS - referred to as backlights by the LiquidTWI2 library + static uint8_t ledsprev = 0; + uint8_t leds = 0; + if (target_temperature_bed > 0) leds |= LED_A; + if (target_temperature[0] > 0) leds |= LED_B; + if (fanSpeed) leds |= LED_C; + #if EXTRUDERS > 1 + if (target_temperature[1] > 0) leds |= LED_C; + #endif + if (leds != ledsprev) { + lcd.setBacklight(leds); + ledsprev = leds; + } + #endif +} +#endif + +#ifdef LCD_HAS_SLOW_BUTTONS +static uint8_t lcd_implementation_read_slow_buttons() +{ + #ifdef LCD_I2C_TYPE_MCP23017 + // Reading these buttons this is likely to be too slow to call inside interrupt context + // so they are called during normal lcd_update + return lcd.readButtons() << B_I2C_BTN_OFFSET; + #endif +} +#endif + +#endif//ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H