Merge pull request #4563 from thinkyhead/rc_explain_probe_heights

Explain that Z_PROBE_*_HEIGHT options are nozzle-relative
This commit is contained in:
Scott Lahteine 2016-08-07 19:22:19 -07:00 committed by GitHub
commit 1edbea0fcb
22 changed files with 88 additions and 66 deletions

View file

@ -541,10 +541,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 15 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 15 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

View file

@ -541,10 +541,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 15 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 15 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

View file

@ -523,10 +523,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 15 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 15 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

View file

@ -521,10 +521,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 15 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 15 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

View file

@ -533,10 +533,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 15 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 15 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

View file

@ -535,10 +535,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 5 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 5 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 2 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 2 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

View file

@ -558,10 +558,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 15 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 15 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

View file

@ -541,10 +541,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 15 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 15 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

View file

@ -541,10 +541,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 15 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 15 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

View file

@ -541,10 +541,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 15 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 15 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

View file

@ -538,10 +538,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 15 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 15 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

View file

@ -549,10 +549,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 15 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 15 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

View file

@ -562,10 +562,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 15 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 15 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

View file

@ -533,10 +533,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 15 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 15 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

View file

@ -541,10 +541,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 15 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 15 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

View file

@ -630,10 +630,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 50 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 50 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

View file

@ -624,10 +624,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 15 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 15 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

View file

@ -627,10 +627,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 50 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 50 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

View file

@ -621,10 +621,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 100 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 100 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

View file

@ -622,10 +622,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 20 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 20 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 10 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 10 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

View file

@ -544,10 +544,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 15 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 15 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

View file

@ -531,10 +531,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 15 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 15 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset