STM32F1: various small changes (#14313)

- init the led pin as output (like other HALs)
- reduce sdio dma priority to normal.. highest is never the best...
- allow fsmc only on compatible STM32F1 (like HAL fsmc)
- fsmc: remove an useless C style cast
This commit is contained in:
Scott Lahteine 2019-06-17 17:48:50 -05:00 committed by GitHub
commit 21f377d94a
Signed by: GitHub
GPG key ID: 4AEE18F83AFDEB23
5 changed files with 11 additions and 10 deletions

View file

@ -45,8 +45,7 @@
#define __I
#define __IO volatile
typedef struct
{
typedef struct {
__I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
__IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
__IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
@ -161,12 +160,11 @@ enum TEMP_PINS : char {
#if ENABLED(FILAMENT_WIDTH_SENSOR)
FILWIDTH,
#endif
ADC_PIN_COUNT
ADC_PIN_COUNT
};
uint16_t HAL_adc_results[ADC_PIN_COUNT];
// --------------------------------------------------------------------------
// Function prototypes
// --------------------------------------------------------------------------
@ -209,6 +207,9 @@ static void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) {
void HAL_init(void) {
NVIC_SetPriorityGrouping(0x3);
#if PIN_EXISTS(LED)
OUT_WRITE(LED_PIN, LOW);
#endif
}
/* VGPV Done with defines

View file

@ -40,7 +40,7 @@ bool SDIO_Init(void) {
dma_init(SDIO_DMA_DEV);
dma_disable(SDIO_DMA_DEV, SDIO_DMA_CHANNEL);
dma_set_priority(SDIO_DMA_DEV, SDIO_DMA_CHANNEL, DMA_PRIORITY_VERY_HIGH);
dma_set_priority(SDIO_DMA_DEV, SDIO_DMA_CHANNEL, DMA_PRIORITY_MEDIUM);
if (!SDIO_CmdGoIdleState()) return false;
if (!SDIO_CmdGoIdleState()) return false; /* Hotplugged cards tends to miss first CMD0, so give them a second chance. */

View file

@ -45,7 +45,7 @@
void LCD_IO_Init(uint8_t cs, uint8_t rs);
void LCD_IO_WriteData(uint16_t RegValue);
void LCD_IO_WriteReg(uint8_t Reg);
void LCD_IO_WriteReg(uint16_t Reg);
uint32_t LCD_IO_ReadData(uint16_t RegValue, uint8_t ReadSize);
static uint8_t msgInitCount = 2; // Ignore all messages until 2nd U8G_COM_MSG_INIT
@ -250,8 +250,8 @@ void LCD_IO_WriteData(uint16_t RegValue) {
__DSB();
}
void LCD_IO_WriteReg(uint8_t Reg) {
LCD->REG = (uint16_t)Reg;
void LCD_IO_WriteReg(uint16_t Reg) {
LCD->REG = Reg;
__DSB();
}

View file

@ -34,7 +34,7 @@
#include "watchdog_STM32F1.h"
void watchdog_reset() {
#if PIN_EXISTS(LED)
#if DISABLED(PINS_DEBUGGING) && PIN_EXISTS(LED)
TOGGLE(LED_PIN); // heartbeat indicator
#endif
iwdg_feed();

View file

@ -51,7 +51,7 @@
uint8_t u8g_com_HAL_LPC1768_ssd_hw_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
#define U8G_COM_SSD_I2C_HAL u8g_com_arduino_ssd_i2c_fn
#ifdef ARDUINO_ARCH_STM32F1
#if defined(ARDUINO_ARCH_STM32F1) && PIN_EXISTS(FSMC_CS)
uint8_t u8g_com_stm32duino_fsmc_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
#define U8G_COM_HAL_FSMC_FN u8g_com_stm32duino_fsmc_fn
#else