Add missing dedge init for TMC2209 (#14370)

This commit is contained in:
teemuatlut 2019-06-23 01:00:15 +03:00 committed by Scott Lahteine
parent 1db7013e3b
commit 2247bf1ba5

View file

@ -269,14 +269,12 @@
void tmc_init(TMCMarlin<TMC2160Stepper, AXIS_LETTER, DRIVER_ID, AXIS_ID> &st, const uint16_t mA, const uint16_t microsteps, const uint32_t thrs, const bool stealth) {
st.begin();
static constexpr int8_t timings[] = CHOPPER_TIMING; // Default 4, -2, 1
CHOPCONF_t chopconf{0};
chopconf.tbl = 1;
chopconf.toff = timings[0];
chopconf.toff = chopper_timing.toff;
chopconf.intpol = INTERPOLATE;
chopconf.hend = timings[1] + 3;
chopconf.hstrt = timings[2] - 1;
chopconf.hend = chopper_timing.hend + 3;
chopconf.hstrt = chopper_timing.hstrt - 1;
#if ENABLED(SQUARE_WAVE_STEPPING)
chopconf.dedge = true;
#endif
@ -286,16 +284,9 @@
st.microsteps(microsteps);
st.iholddelay(10);
st.TPOWERDOWN(128); // ~2s until driver lowers to hold current
st.TCOOLTHRS(0xFFFFF);
#if ENABLED(ADAPTIVE_CURRENT)
COOLCONF_t coolconf{0};
coolconf.semin = INCREASE_CURRENT_THRS;
coolconf.semax = REDUCE_CURRENT_THRS;
st.COOLCONF(coolconf.sr);
#endif
st.en_pwm_mode(stealth);
st.stored.stealthChop_enabled = stealth;
TMC2160_n::PWMCONF_t pwmconf{0};
pwmconf.pwm_lim = 12;
@ -573,6 +564,9 @@
chopconf.intpol = INTERPOLATE;
chopconf.hend = chopper_timing.hend + 3;
chopconf.hstrt = chopper_timing.hstrt - 1;
#if ENABLED(SQUARE_WAVE_STEPPING)
chopconf.dedge = true;
#endif
st.CHOPCONF(chopconf.sr);
st.rms_current(mA, HOLD_MULTIPLIER);
@ -673,14 +667,12 @@
void tmc_init(TMCMarlin<TMC5160Stepper, AXIS_LETTER, DRIVER_ID, AXIS_ID> &st, const uint16_t mA, const uint16_t microsteps, const uint32_t thrs, const bool stealth) {
st.begin();
int8_t timings[] = CHOPPER_TIMING; // Default 4, -2, 1
CHOPCONF_t chopconf{0};
chopconf.tbl = 1;
chopconf.toff = timings[0];
chopconf.toff = chopper_timing.toff;
chopconf.intpol = INTERPOLATE;
chopconf.hend = timings[1] + 3;
chopconf.hstrt = timings[2] - 1;
chopconf.hend = chopper_timing.hend + 3;
chopconf.hstrt = chopper_timing.hstrt - 1;
#if ENABLED(SQUARE_WAVE_STEPPING)
chopconf.dedge = true;
#endif
@ -691,14 +683,8 @@
st.iholddelay(10);
st.TPOWERDOWN(128); // ~2s until driver lowers to hold current
#if ENABLED(ADAPTIVE_CURRENT)
COOLCONF_t coolconf{0};
coolconf.semin = INCREASE_CURRENT_THRS;
coolconf.semax = REDUCE_CURRENT_THRS;
st.COOLCONF(coolconf.sr);
#endif
st.en_pwm_mode(stealth);
st.stored.stealthChop_enabled = stealth;
TMC2160_n::PWMCONF_t pwmconf{0};
pwmconf.pwm_lim = 12;