Merge pull request #6860 from thinkyhead/bf_case_light_toggle

Case light as a toggle menu item
This commit is contained in:
Scott Lahteine 2017-05-28 18:30:55 -05:00 committed by GitHub
commit 25114414cd
21 changed files with 540 additions and 594 deletions

View file

@ -193,8 +193,7 @@
#define MSG_INFO_EXTRUDERS _UxGT("Extrusors")
#define MSG_INFO_BAUDRATE _UxGT("Baudios")
#define MSG_INFO_PROTOCOL _UxGT("Protocolo")
#define MSG_LIGHTS_ON _UxGT("Enchegar luz")
#define MSG_LIGHTS_OFF _UxGT("Desenchegar luz")
#define MSG_CASE_LIGHT _UxGT("Luz")
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT _UxGT("Conteo de impresion")

View file

@ -36,20 +36,11 @@
#define WELCOME_MSG MACHINE_NAME _UxGT(" Готов.")
#define MSG_SD_INSERTED _UxGT("Картата е поставена")
#define MSG_SD_REMOVED _UxGT("Картата е извадена")
#define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters
#define MSG_MAIN _UxGT("Меню")
#define MSG_AUTOSTART _UxGT("Автостарт")
#define MSG_DISABLE_STEPPERS _UxGT("Изкл. двигатели")
#define MSG_AUTO_HOME _UxGT("Паркиране")
#define MSG_AUTO_HOME_X _UxGT("Home X")
#define MSG_AUTO_HOME_Y _UxGT("Home Y")
#define MSG_AUTO_HOME_Z _UxGT("Home Z")
#define MSG_LEVEL_BED_HOMING _UxGT("Homing XYZ")
#define MSG_LEVEL_BED_WAITING _UxGT("Click to Begin")
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Next Point")
#define MSG_LEVEL_BED_DONE _UxGT("Leveling Done!")
#define MSG_SET_HOME_OFFSETS _UxGT("Задай Начало")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Offsets applied")
#define MSG_SET_ORIGIN _UxGT("Изходна точка")
#define MSG_PREHEAT_1 _UxGT("Подгряване PLA")
#define MSG_PREHEAT_1_N _UxGT("Подгряване PLA")
@ -89,21 +80,6 @@
#define MSG_AUTOTEMP _UxGT("Авто-темп.")
#define MSG_ON _UxGT("Вкл. ")
#define MSG_OFF _UxGT("Изкл. ")
#define MSG_PID_P _UxGT("PID-P")
#define MSG_PID_I _UxGT("PID-I")
#define MSG_PID_D _UxGT("PID-D")
#define MSG_PID_C _UxGT("PID-C")
#define MSG_SELECT _UxGT("Select")
#define MSG_ACC _UxGT("Acc")
#define MSG_JERK _UxGT("Jerk")
#define MSG_VX_JERK _UxGT("Vx-jerk")
#define MSG_VY_JERK _UxGT("Vy-jerk")
#define MSG_VZ_JERK _UxGT("Vz-jerk")
#define MSG_VE_JERK _UxGT("Ve-jerk")
#define MSG_VMAX _UxGT("Vmax ")
#define MSG_VMIN _UxGT("Vmin")
#define MSG_VTRAV_MIN _UxGT("VTrav min")
#define MSG_AMAX _UxGT("Amax ")
#define MSG_A_RETRACT _UxGT("A-откат")
#define MSG_A_TRAVEL _UxGT("A-travel")
#define MSG_STEPS_PER_MM _UxGT("Стъпки/mm")
@ -153,100 +129,15 @@
#define MSG_INIT_SDCARD _UxGT("Иниц. SD-Карта")
#define MSG_CNG_SDCARD _UxGT("Смяна SD-Карта")
#define MSG_ZPROBE_OUT _UxGT("Z-сондата е извадена")
#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test")
#define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch")
#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("first")
#define MSG_ZPROBE_ZOFFSET _UxGT("Z Отстояние")
#define MSG_BABYSTEP_X _UxGT("Министъпка X")
#define MSG_BABYSTEP_Y _UxGT("Министъпка Y")
#define MSG_BABYSTEP_Z _UxGT("Министъпка Z")
#define MSG_ENDSTOP_ABORT _UxGT("Стоп Кр.Изключватели")
#define MSG_HEATING_FAILED_LCD _UxGT("Heating failed")
#define MSG_ERR_REDUNDANT_TEMP _UxGT("Err: REDUNDANT TEMP")
#define MSG_THERMAL_RUNAWAY _UxGT("THERMAL RUNAWAY")
#define MSG_ERR_MAXTEMP _UxGT("Err: MAXTEMP")
#define MSG_ERR_MINTEMP _UxGT("Err: MINTEMP")
#define MSG_ERR_MAXTEMP_BED _UxGT("Err: MAXTEMP BED")
#define MSG_ERR_MINTEMP_BED _UxGT("Err: MINTEMP BED")
#define MSG_ERR_Z_HOMING _UxGT("G28 Z Forbidden")
#define MSG_HALTED _UxGT("PRINTER HALTED")
#define MSG_PLEASE_RESET _UxGT("Please reset")
#define MSG_SHORT_DAY _UxGT("d") // One character only
#define MSG_SHORT_HOUR _UxGT("h") // One character only
#define MSG_SHORT_MINUTE _UxGT("m") // One character only
#define MSG_HEATING _UxGT("Heating...")
#define MSG_HEATING_COMPLETE _UxGT("Heating done.")
#define MSG_BED_HEATING _UxGT("Bed Heating.")
#define MSG_BED_DONE _UxGT("Bed done.")
#define MSG_DELTA_CALIBRATE _UxGT("Делта Калибровка")
#define MSG_DELTA_CALIBRATE_X _UxGT("Калибровка X")
#define MSG_DELTA_CALIBRATE_Y _UxGT("Калибровка Y")
#define MSG_DELTA_CALIBRATE_Z _UxGT("Калибровка Z")
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Калибровка Център")
#define MSG_INFO_MENU _UxGT("About Printer")
#define MSG_INFO_PRINTER_MENU _UxGT("Printer Info")
#define MSG_INFO_STATS_MENU _UxGT("Printer Stats")
#define MSG_INFO_BOARD_MENU _UxGT("Board Info")
#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistors")
#define MSG_INFO_EXTRUDERS _UxGT("Extruders")
#define MSG_INFO_BAUDRATE _UxGT("Baud")
#define MSG_INFO_PROTOCOL _UxGT("Protocol")
#define MSG_LIGHTS_ON _UxGT("Case light on")
#define MSG_LIGHTS_OFF _UxGT("Case light off")
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT _UxGT("Print Count")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Completed")
#define MSG_INFO_PRINT_TIME _UxGT("Total print time")
#define MSG_INFO_PRINT_LONGEST _UxGT("Longest job time")
#define MSG_INFO_PRINT_FILAMENT _UxGT("Extruded total")
#else
#define MSG_INFO_PRINT_COUNT _UxGT("Prints")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Completed")
#define MSG_INFO_PRINT_TIME _UxGT("Total")
#define MSG_INFO_PRINT_LONGEST _UxGT("Longest")
#define MSG_INFO_PRINT_FILAMENT _UxGT("Extruded")
#endif
#define MSG_INFO_MIN_TEMP _UxGT("Min Temp")
#define MSG_INFO_MAX_TEMP _UxGT("Max Temp")
#define MSG_INFO_PSU _UxGT("Power Supply")
#define MSG_DRIVE_STRENGTH _UxGT("Drive Strength")
#define MSG_DAC_PERCENT _UxGT("Driver %")
#define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM Write")
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extrude more")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Resume print")
#if LCD_HEIGHT >= 4
// Up to 3 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Wait for start")
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("of the filament")
#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("change")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wait for")
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("filament unload")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert filament")
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("and press button")
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("to continue...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Wait for")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament load")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Wait for")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("filament extrude")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wait for print")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("to resume")
#else // LCD_HEIGHT < 4
// Up to 2 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Please wait...")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Ejecting...")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert and Click")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Loading...")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extruding...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Resuming...")
#endif // LCD_HEIGHT < 4
#endif // LANGUAGE_BG_H

View file

@ -196,8 +196,7 @@
#define MSG_INFO_EXTRUDERS _UxGT("Extrusors")
#define MSG_INFO_BAUDRATE _UxGT("Baud")
#define MSG_INFO_PROTOCOL _UxGT("Protocol")
#define MSG_LIGHTS_ON _UxGT("Encen el llum")
#define MSG_LIGHTS_OFF _UxGT("Apaga el llum")
#define MSG_CASE_LIGHT _UxGT("Llum")
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT _UxGT("Total impressions")

View file

@ -205,8 +205,8 @@
#define MSG_INFO_EXTRUDERS _UxGT("Extrudery")
#define MSG_INFO_BAUDRATE _UxGT("Rychlost")
#define MSG_INFO_PROTOCOL _UxGT("Protokol")
#define MSG_LIGHTS_ON _UxGT("Osvetleni Zap")
#define MSG_LIGHTS_OFF _UxGT("Osvetleni Vyp")
#define MSG_CASE_LIGHT _UxGT("Osvetleni")
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT _UxGT("Pocet tisku")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Dokonceno")
@ -220,6 +220,7 @@
#define MSG_INFO_PRINT_LONGEST _UxGT("Nejdelsi")
#define MSG_INFO_PRINT_FILAMENT _UxGT("Vytlaceno")
#endif
#define MSG_INFO_MIN_TEMP _UxGT("Teplota min")
#define MSG_INFO_MAX_TEMP _UxGT("Teplota max")
#define MSG_INFO_PSU _UxGT("Nap. zdroj")

View file

@ -205,8 +205,7 @@
#define MSG_INFO_EXTRUDERS _UxGT("Extruder")
#define MSG_INFO_BAUDRATE _UxGT("Baud")
#define MSG_INFO_PROTOCOL _UxGT("Protokoll")
#define MSG_LIGHTS_ON _UxGT("Gehäuse Licht an")
#define MSG_LIGHTS_OFF _UxGT("Gehäuse Licht aus")
#define MSG_CASE_LIGHT _UxGT("Licht")
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT _UxGT("Gesamte Drucke")
@ -221,6 +220,7 @@
#define MSG_INFO_PRINT_LONGEST _UxGT("Längster")
#define MSG_INFO_PRINT_FILAMENT _UxGT("Extrud.")
#endif
#define MSG_INFO_MIN_TEMP _UxGT("Min Temp")
#define MSG_INFO_MAX_TEMP _UxGT("Max Temp")
#define MSG_INFO_PSU _UxGT("Stromversorgung")

View file

@ -700,11 +700,8 @@
#ifndef MSG_INFO_PROTOCOL
#define MSG_INFO_PROTOCOL _UxGT("Protocol")
#endif
#ifndef MSG_LIGHTS_ON
#define MSG_LIGHTS_ON _UxGT("Case light on")
#endif
#ifndef MSG_LIGHTS_OFF
#define MSG_LIGHTS_OFF _UxGT("Case light off")
#ifndef MSG_CASE_LIGHT
#define MSG_CASE_LIGHT _UxGT("Case light")
#endif
#if LCD_WIDTH >= 20

View file

@ -202,8 +202,8 @@
#define MSG_INFO_EXTRUDERS _UxGT("Extrusores")
#define MSG_INFO_BAUDRATE _UxGT("Baudios")
#define MSG_INFO_PROTOCOL _UxGT("Protocolo")
#define MSG_LIGHTS_ON _UxGT("Luz cabina ON")
#define MSG_LIGHTS_OFF _UxGT("Luz cabina OFF")
#define MSG_CASE_LIGHT _UxGT("Luz cabina")
#if LCD_WIDTH > 19
#define MSG_INFO_PRINT_COUNT _UxGT("Conteo de impresion")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Completadas")
@ -217,6 +217,7 @@
#define MSG_INFO_PRINT_LONGEST _UxGT("Mas larga")
#define MSG_INFO_PRINT_FILAMENT _UxGT("Extrusion")
#endif
#define MSG_INFO_MIN_TEMP _UxGT("Temperatura minima")
#define MSG_INFO_MAX_TEMP _UxGT("Temperatura maxima")
#define MSG_INFO_PSU _UxGT("Fuente de poder")

View file

@ -202,8 +202,8 @@
#define MSG_INFO_EXTRUDERS _UxGT("Estrusoreak")
#define MSG_INFO_BAUDRATE _UxGT("Baudioak")
#define MSG_INFO_PROTOCOL _UxGT("Protokoloa")
#define MSG_LIGHTS_ON _UxGT("Kabina Argia ON")
#define MSG_LIGHTS_OFF _UxGT("Kabina Argia OFF")
#define MSG_CASE_LIGHT _UxGT("Kabina Argia")
#if LCD_WIDTH > 19
#define MSG_INFO_PRINT_COUNT _UxGT("Inprim. Zenbaketa")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Burututa")

View file

@ -207,8 +207,7 @@
#define MSG_INFO_EXTRUDERS _UxGT("Extrudeurs")
#define MSG_INFO_BAUDRATE _UxGT("Baud")
#define MSG_INFO_PROTOCOL _UxGT("Protocole")
#define MSG_LIGHTS_ON _UxGT("Allumer boîtier")
#define MSG_LIGHTS_OFF _UxGT("Eteindre boîtier")
#define MSG_CASE_LIGHT _UxGT("Lumière")
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT _UxGT("Nbre impressions")

View file

@ -192,8 +192,7 @@
#define MSG_INFO_EXTRUDERS _UxGT("Extrusores")
#define MSG_INFO_BAUDRATE _UxGT("Baudios")
#define MSG_INFO_PROTOCOL _UxGT("Protocolo")
#define MSG_LIGHTS_ON _UxGT("Acender a luz")
#define MSG_LIGHTS_OFF _UxGT("Apagar a luz")
#define MSG_CASE_LIGHT _UxGT("Luz")
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT _UxGT("Total traballos")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Total completos")

View file

@ -191,8 +191,7 @@
#define MSG_INFO_EXTRUDERS _UxGT("Extruderi")
#define MSG_INFO_BAUDRATE _UxGT("Baud")
#define MSG_INFO_PROTOCOL _UxGT("Protokol")
#define MSG_LIGHTS_ON _UxGT("Upali osvjetljenje")
#define MSG_LIGHTS_OFF _UxGT("Ugasi osvjetljenje")
#define MSG_CASE_LIGHT _UxGT("Osvjetljenje")
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT _UxGT("Broj printova")

View file

@ -209,8 +209,8 @@
#define MSG_INFO_EXTRUDERS _UxGT("Estrusori")
#define MSG_INFO_BAUDRATE _UxGT("Baud")
#define MSG_INFO_PROTOCOL _UxGT("Protocollo")
#define MSG_LIGHTS_ON _UxGT("Luci Case on")
#define MSG_LIGHTS_OFF _UxGT("Luci Case off")
#define MSG_CASE_LIGHT _UxGT("Luci Case")
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT _UxGT("Contat. stampa")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Completati")

View file

@ -262,8 +262,7 @@
#define MSG_INFO_EXTRUDERS "\xb4\xb8\xbd\xc4\xd9\xb0\xc0\xde\xb0\xbd\xb3" // "エクストルーダースウ" ("Extruders")
#define MSG_INFO_BAUDRATE "\xce\xde\xb0\xda\xb0\xc4" // "ボーレート" ("Baud")
#define MSG_INFO_PROTOCOL "\xcc\xdf\xdb\xc4\xba\xd9" // "プロトコル" ("Protocol")
#define MSG_LIGHTS_ON "\xb7\xae\xb3\xc0\xb2\xc5\xb2\xbc\xae\xb3\xd2\xb2\x20\xb5\xdd" // "キョウタイナイショウメイ オン" ("Case light on")
#define MSG_LIGHTS_OFF "\xb7\xae\xb3\xc0\xb2\xc5\xb2\xbc\xae\xb3\xd2\xb2\x20\xb5\xcc" // "キョウタイナイショウメイ オフ" ("Case light off")
#define MSG_CASE_LIGHT "\xb7\xae\xb3\xc0\xb2\xc5\xb2\xbc\xae\xb3\xd2\xb2" // "キョウタイナイショウメイ" ("Case light")
#define MSG_INFO_PRINT_COUNT "\xcc\xdf\xd8\xdd\xc4\xbd\xb3" // "プリントスウ" ("Print Count")
#define MSG_INFO_COMPLETED_PRINTS "\xb6\xdd\xd8\xae\xb3\xbd\xb3" // "カンリョウスウ" ("Completed")
#define MSG_INFO_PRINT_TIME "\xcc\xdf\xd8\xdd\xc4\xbc\xde\xb6\xdd\xd9\xb2\xb9\xb2" // "プリントジカンルイケイ" ("Total print time")

View file

@ -192,8 +192,7 @@
#define MSG_INFO_EXTRUDERS _UxGT("エクストルーダースウ") // "Extruders"
#define MSG_INFO_BAUDRATE _UxGT("ボーレート") // "Baud"
#define MSG_INFO_PROTOCOL _UxGT("プロトコル") // "Protocol"
#define MSG_LIGHTS_ON _UxGT("キョウタイナイショウメイ オン") // "Case light on"
#define MSG_LIGHTS_OFF _UxGT("キョウタイナイショウメイ オフ") // "Case light off"
#define MSG_CASE_LIGHT _UxGT("キョウタイナイショウメイ") // "Case light"
#define MSG_INFO_PRINT_COUNT _UxGT("プリントスウ ") // "Print Count"
#define MSG_INFO_COMPLETED_PRINTS _UxGT("カンリョウスウ") // "Completed"
#define MSG_INFO_PRINT_TIME _UxGT("プリントジカンルイケイ") // "Total print time"

View file

@ -202,8 +202,7 @@
#define MSG_INFO_MENU _UxGT("Over Printer")
#define MSG_INFO_PRINTER_MENU _UxGT("Printer Info")
#define MSG_INFO_PROTOCOL _UxGT("Protocol")
#define MSG_LIGHTS_ON _UxGT("Case licht aan")
#define MSG_LIGHTS_OFF _UxGT("Case licht uit")
#define MSG_CASE_LIGHT _UxGT("Case licht")
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT _UxGT("Printed Aantal")

240
Marlin/language_pl-DOGM.h Normal file
View file

@ -0,0 +1,240 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Polish for DOGM display - includes accented characters
*/
#define WELCOME_MSG MACHINE_NAME _UxGT(" gotowy.")
#define MSG_SD_INSERTED _UxGT("Karta włożona")
#define MSG_SD_REMOVED _UxGT("Karta usunięta")
#define MSG_LCD_ENDSTOPS _UxGT("Kranców.") // Max length 8 characters
#define MSG_MAIN _UxGT("Menu główne")
#define MSG_AUTOSTART _UxGT("Autostart")
#define MSG_DISABLE_STEPPERS _UxGT("Wyłącz silniki")
#define MSG_AUTO_HOME _UxGT("Pozycja zerowa")
#define MSG_AUTO_HOME_X _UxGT("Zeruj X")
#define MSG_AUTO_HOME_Y _UxGT("Zeruj Y")
#define MSG_AUTO_HOME_Z _UxGT("Zeruj Z")
#define MSG_LEVEL_BED _UxGT("Poziom. stołu")
#define MSG_LEVEL_BED_HOMING _UxGT("Pozycja zerowa")
#define MSG_LEVEL_BED_WAITING _UxGT("Kliknij by rozp.")
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Następny punkt")
#define MSG_LEVEL_BED_DONE _UxGT("Wypoziomowano!")
#define MSG_SET_HOME_OFFSETS _UxGT("Ust. poz. zer.")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Poz. zerowa ust.")
#define MSG_SET_ORIGIN _UxGT("Ustaw punkt zero")
#define MSG_PREHEAT_1 _UxGT("Rozgrzej PLA")
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ")
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" wsz.")
#define MSG_PREHEAT_1_BEDONLY _UxGT("Rozgrzej stół PLA")
#define MSG_PREHEAT_1_SETTINGS _UxGT("Ustaw. rozg. PLA")
#define MSG_PREHEAT_2 _UxGT("Rozgrzej ABS")
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ")
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" wsz.")
#define MSG_PREHEAT_2_BEDONLY _UxGT("Rozgrzej stół ABS")
#define MSG_PREHEAT_2_SETTINGS _UxGT("Ustaw. rozg. ABS")
#define MSG_COOLDOWN _UxGT("Chłodzenie")
#define MSG_SWITCH_PS_ON _UxGT("Włącz zasilacz")
#define MSG_SWITCH_PS_OFF _UxGT("Wyłącz zasilacz")
#define MSG_EXTRUDE _UxGT("Ekstruzja")
#define MSG_RETRACT _UxGT("Wycofanie")
#define MSG_MOVE_AXIS _UxGT("Ruch osi")
#define MSG_BED_LEVELING _UxGT("Poziom. stołu")
#define MSG_MOVE_X _UxGT("Przesuń w X")
#define MSG_MOVE_Y _UxGT("Przesuń w Y")
#define MSG_MOVE_Z _UxGT("Przesuń w Z")
#define MSG_MOVE_E _UxGT("Ekstruzja (os E)")
#define MSG_MOVE_01MM _UxGT("Przesuń co .1mm")
#define MSG_MOVE_1MM _UxGT("Przesuń co 1mm")
#define MSG_MOVE_10MM _UxGT("Przesuń co 10mm")
#define MSG_SPEED _UxGT("Predkość")
#define MSG_BED_Z _UxGT("Stół Z")
#define MSG_NOZZLE _UxGT("Dysza")
#define MSG_BED _UxGT("Stół")
#define MSG_FAN_SPEED _UxGT("Obroty wiatraka")
#define MSG_FLOW _UxGT("Przepływ")
#define MSG_CONTROL _UxGT("Ustawienia")
#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Min")
#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" Max")
#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Mnożnik")
#define MSG_AUTOTEMP _UxGT("Auto. temperatura")
#define MSG_ON _UxGT("Wł. ")
#define MSG_OFF _UxGT("Wył.")
#define MSG_PID_P _UxGT("PID-P")
#define MSG_PID_I _UxGT("PID-I")
#define MSG_PID_D _UxGT("PID-D")
#define MSG_PID_C _UxGT("PID-C")
#define MSG_SELECT _UxGT("Select")
#define MSG_ACC _UxGT("Przyśpieszenie")
#define MSG_JERK _UxGT("Zryw")
#define MSG_VX_JERK _UxGT("Zryw Vx")
#define MSG_VY_JERK _UxGT("Zryw Vy")
#define MSG_VZ_JERK _UxGT("Zryw Vz")
#define MSG_VE_JERK _UxGT("Zryw Ve")
#define MSG_VMAX _UxGT("Vmax ")
#define MSG_VMIN _UxGT("Vmin")
#define MSG_VTRAV_MIN _UxGT("Vskok min")
#define MSG_ACCELERATION MSG_ACC
#define MSG_AMAX _UxGT("Amax")
#define MSG_A_RETRACT _UxGT("A-wycofanie")
#define MSG_A_TRAVEL _UxGT("A-przesuń.")
#define MSG_STEPS_PER_MM _UxGT("kroki/mm")
#define MSG_XSTEPS _UxGT("krokiX/mm")
#define MSG_YSTEPS _UxGT("krokiY/mm")
#define MSG_ZSTEPS _UxGT("krokiZ/mm")
#define MSG_ESTEPS _UxGT("krokiE/mm")
#define MSG_E1STEPS _UxGT("krokiE1/mm")
#define MSG_E2STEPS _UxGT("krokiE2/mm")
#define MSG_E3STEPS _UxGT("krokiE3/mm")
#define MSG_E4STEPS _UxGT("krokiE4/mm")
#define MSG_E5STEPS _UxGT("krokiE5/mm")
#define MSG_TEMPERATURE _UxGT("Temperatura")
#define MSG_MOTION _UxGT("Ruch")
#define MSG_FILAMENT _UxGT("Filament")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E w mm3")
#define MSG_FILAMENT_DIAM _UxGT("Śr. fil.")
#define MSG_CONTRAST _UxGT("Kontrast LCD")
#define MSG_STORE_EEPROM _UxGT("Zapisz w pamięci")
#define MSG_LOAD_EEPROM _UxGT("Wczytaj z pamięci")
#define MSG_RESTORE_FAILSAFE _UxGT("Ustaw. fabryczne")
#define MSG_REFRESH _UxGT("Odswież")
#define MSG_WATCH _UxGT("Ekran główny")
#define MSG_PREPARE _UxGT("Przygotuj")
#define MSG_TUNE _UxGT("Strojenie")
#define MSG_PAUSE_PRINT _UxGT("Pauza")
#define MSG_RESUME_PRINT _UxGT("Wznowienie")
#define MSG_STOP_PRINT _UxGT("Stop")
#define MSG_CARD_MENU _UxGT("Karta SD")
#define MSG_NO_CARD _UxGT("Brak karty")
#define MSG_DWELL _UxGT("Uśpij...")
#define MSG_USERWAIT _UxGT("Oczekiwanie...")
#define MSG_RESUMING _UxGT("Wznawianie druku")
#define MSG_PRINT_ABORTED _UxGT("Druk przerwany")
#define MSG_NO_MOVE _UxGT("Brak ruchu")
#define MSG_KILLED _UxGT("Ubity. ")
#define MSG_STOPPED _UxGT("Zatrzymany. ")
#define MSG_CONTROL_RETRACT _UxGT("Wycofaj mm")
#define MSG_CONTROL_RETRACT_SWAP _UxGT("Z Wycof. mm")
#define MSG_CONTROL_RETRACTF _UxGT("Wycofaj V")
#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Skok Z mm")
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("Cof. wycof. mm")
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Z Cof. wyc. mm")
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("Cof. wycof. V")
#define MSG_AUTORETRACT _UxGT("Auto. wycofanie")
#define MSG_FILAMENTCHANGE _UxGT("Zmień filament")
#define MSG_INIT_SDCARD _UxGT("Inicjal. karty SD")
#define MSG_CNG_SDCARD _UxGT("Zmiana karty SD")
#define MSG_ZPROBE_OUT _UxGT("Sonda Z za stołem")
#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test")
#define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch")
#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("first")
#define MSG_ZPROBE_ZOFFSET _UxGT("Offset Z")
#define MSG_BABYSTEP_X _UxGT("Babystep X")
#define MSG_BABYSTEP_Y _UxGT("Babystep Y")
#define MSG_BABYSTEP_Z _UxGT("Babystep Z")
#define MSG_ENDSTOP_ABORT _UxGT("Błąd krańcówki")
#define MSG_HEATING_FAILED_LCD _UxGT("Rozgrz. nieudane")
#define MSG_ERR_REDUNDANT_TEMP _UxGT("Błąd temperatury")
#define MSG_THERMAL_RUNAWAY _UxGT("Zanik temp.")
#define MSG_ERR_MAXTEMP _UxGT("Err max temp")
#define MSG_ERR_MINTEMP _UxGT("Err min temp")
#define MSG_ERR_MAXTEMP_BED _UxGT("Err max temp stołu")
#define MSG_ERR_MINTEMP_BED _UxGT("Err min temp stołu")
#define MSG_ERR_Z_HOMING _UxGT("G28 Z Forbidden")
#define MSG_HALTED _UxGT("Drukarka zatrzym.")
#define MSG_PLEASE_RESET _UxGT("Proszę zresetować")
#define MSG_SHORT_DAY _UxGT("d") // One character only
#define MSG_SHORT_HOUR _UxGT("g") // One character only
#define MSG_SHORT_MINUTE _UxGT("m") // One character only
#define MSG_HEATING _UxGT("Rozgrzewanie...")
#define MSG_HEATING_COMPLETE _UxGT("Rozgrzano")
#define MSG_BED_HEATING _UxGT("Rozgrzewanie stołu...")
#define MSG_BED_DONE _UxGT("Rozgrzano stół")
#define MSG_DELTA_CALIBRATE _UxGT("Kalibrowanie Delty")
#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibruj X")
#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibruj Y")
#define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibruj Z")
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibruj środek")
#define MSG_INFO_MENU _UxGT("O drukarce")
#define MSG_INFO_PRINTER_MENU _UxGT("Info drukarki")
#define MSG_INFO_STATS_MENU _UxGT("Statystyki")
#define MSG_INFO_BOARD_MENU _UxGT("Board Info")
#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistory")
#define MSG_INFO_EXTRUDERS _UxGT("Ekstrudery")
#define MSG_INFO_BAUDRATE _UxGT("Predkość USB")
#define MSG_INFO_PROTOCOL _UxGT("Protokół")
#define MSG_CASE_LIGHT _UxGT("Oświetlenie")
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT _UxGT("Wydrukowano")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Ukończono")
#define MSG_INFO_PRINT_TIME _UxGT("Czas druku")
#define MSG_INFO_PRINT_LONGEST _UxGT("Najdł. druk")
#define MSG_INFO_PRINT_FILAMENT _UxGT("Użyty fil.")
#else
#define MSG_INFO_PRINT_COUNT _UxGT("Wydrukowano")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Ukończono")
#define MSG_INFO_PRINT_TIME _UxGT("Razem")
#define MSG_INFO_PRINT_LONGEST _UxGT("Najdł. druk")
#define MSG_INFO_PRINT_FILAMENT _UxGT("Użyty fil.")
#endif
#define MSG_INFO_MIN_TEMP _UxGT("Min Temp")
#define MSG_INFO_MAX_TEMP _UxGT("Max Temp")
#define MSG_INFO_PSU _UxGT("Zasilacz")
#define MSG_DRIVE_STRENGTH _UxGT("Siła silnika")
#define MSG_DAC_PERCENT _UxGT("Siła %")
#define MSG_DAC_EEPROM_WRITE _UxGT("Zapisz DAC EEPROM")
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("ZMIEŃ FILAMENT")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("ZMIEŃ OPCJE:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Ekstruduj więcej")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Wznów drukowanie")
#if LCD_HEIGHT >= 4
// Up to 3 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Czekam na ")
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("zmianę filamentu")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Czekam na")
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("wyjęcie filamentu")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Włóz filament")
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("i naciśnij przycisk")
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("aby kontynuować...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Czekam na")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("włożenie filamentu")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Czekam na")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("ekstruzję filamentu")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Czekam na")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("wznowienie druku")
#else // LCD_HEIGHT < 4
// Up to 2 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Proszę czekać...")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wysuwanie...")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Włóż i naciśnij prz.")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Ładowanie...")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Ekstruzja...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wznowienie...")
#endif // LCD_HEIGHT < 4

View file

@ -0,0 +1,265 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Polish for HD44780 display - no accented characters
*/
#define WELCOME_MSG MACHINE_NAME _UxGT(" gotowy.")
#define MSG_SD_INSERTED _UxGT("Karta wlozona")
#define MSG_SD_REMOVED _UxGT("Karta usunieta")
#define MSG_LCD_ENDSTOPS _UxGT("Krancow.") // Max length 8 characters
#define MSG_MAIN _UxGT("Menu glowne")
#define MSG_AUTOSTART _UxGT("Autostart")
#define MSG_DISABLE_STEPPERS _UxGT("Wylacz silniki")
#define MSG_AUTO_HOME _UxGT("Pozycja zerowa")
#define MSG_AUTO_HOME_X _UxGT("Zeruj X")
#define MSG_AUTO_HOME_Y _UxGT("Zeruj Y")
#define MSG_AUTO_HOME_Z _UxGT("Zeruj Z")
#define MSG_LEVEL_BED _UxGT("Poziom. stolu")
#define MSG_LEVEL_BED_HOMING _UxGT("Pozycja zerowa")
#define MSG_LEVEL_BED_WAITING _UxGT("Kliknij by rozp.")
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Nastepny punkt")
#define MSG_LEVEL_BED_DONE _UxGT("Wypoziomowano!")
#define MSG_SET_HOME_OFFSETS _UxGT("Ust. poz. zer.")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Poz. zerowa ust.")
#define MSG_SET_ORIGIN _UxGT("Ustaw punkt zero")
#define MSG_PREHEAT_1 _UxGT("Rozgrzej PLA")
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ")
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" wsz.")
#define MSG_PREHEAT_1_BEDONLY _UxGT("Rozgrzej stol PLA")
#define MSG_PREHEAT_1_SETTINGS _UxGT("Ustaw. rozg. PLA")
#define MSG_PREHEAT_2 _UxGT("Rozgrzej ABS")
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ")
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" wsz.")
#define MSG_PREHEAT_2_BEDONLY _UxGT("Rozgrzej stol ABS")
#define MSG_PREHEAT_2_SETTINGS _UxGT("Ustaw. rozg. ABS")
#define MSG_COOLDOWN _UxGT("Chlodzenie")
#define MSG_SWITCH_PS_ON _UxGT("Wlacz zasilacz")
#define MSG_SWITCH_PS_OFF _UxGT("Wylacz zasilacz")
#define MSG_EXTRUDE _UxGT("Ekstruzja")
#define MSG_RETRACT _UxGT("Wycofanie")
#define MSG_MOVE_AXIS _UxGT("Ruch osi")
#define MSG_BED_LEVELING _UxGT("Poziom. stolu")
#define MSG_MOVE_X _UxGT("Przesun w X")
#define MSG_MOVE_Y _UxGT("Przesun w Y")
#define MSG_MOVE_Z _UxGT("Przesun w Z")
#define MSG_MOVE_E _UxGT("Ekstruzja (os E)")
#define MSG_MOVE_01MM _UxGT("Przesun co .1mm")
#define MSG_MOVE_1MM _UxGT("Przesun co 1mm")
#define MSG_MOVE_10MM _UxGT("Przesun co 10mm")
#define MSG_SPEED _UxGT("Predkosc")
#define MSG_BED_Z _UxGT("Stol Z")
#define MSG_NOZZLE _UxGT("Dysza")
#define MSG_BED _UxGT("Stol")
#define MSG_FAN_SPEED _UxGT("Obroty wiatraka")
#define MSG_FLOW _UxGT("Przeplyw")
#define MSG_CONTROL _UxGT("Ustawienia")
#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Min")
#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" Max")
#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Mnoznik")
#define MSG_AUTOTEMP _UxGT("Auto. temperatura")
#define MSG_ON _UxGT("Wl. ")
#define MSG_OFF _UxGT("Wyl.")
#define MSG_PID_P _UxGT("PID-P")
#define MSG_PID_I _UxGT("PID-I")
#define MSG_PID_D _UxGT("PID-D")
#define MSG_PID_C _UxGT("PID-C")
#define MSG_SELECT _UxGT("Select")
#define MSG_ACC _UxGT("Przyspieszenie")
#define MSG_JERK _UxGT("Zryw")
#define MSG_VX_JERK _UxGT("Zryw Vx")
#define MSG_VY_JERK _UxGT("Zryw Vy")
#define MSG_VZ_JERK _UxGT("Zryw Vz")
#define MSG_VE_JERK _UxGT("Zryw Ve")
#define MSG_VMAX _UxGT("Vmax ")
#define MSG_VMIN _UxGT("Vmin")
#define MSG_VTRAV_MIN _UxGT("Vskok min")
#define MSG_ACCELERATION MSG_ACC
#define MSG_AMAX _UxGT("Amax")
#define MSG_A_RETRACT _UxGT("A-wycofanie")
#define MSG_A_TRAVEL _UxGT("A-przesun.")
#define MSG_STEPS_PER_MM _UxGT("kroki/mm")
#define MSG_XSTEPS _UxGT("krokiX/mm")
#define MSG_YSTEPS _UxGT("krokiY/mm")
#define MSG_ZSTEPS _UxGT("krokiZ/mm")
#define MSG_ESTEPS _UxGT("krokiE/mm")
#define MSG_E1STEPS _UxGT("krokiE1/mm")
#define MSG_E2STEPS _UxGT("krokiE2/mm")
#define MSG_E3STEPS _UxGT("krokiE3/mm")
#define MSG_E4STEPS _UxGT("krokiE4/mm")
#define MSG_E5STEPS _UxGT("krokiE5/mm")
#define MSG_TEMPERATURE _UxGT("Temperatura")
#define MSG_MOTION _UxGT("Ruch")
#define MSG_FILAMENT _UxGT("Filament")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E w mm3")
#define MSG_FILAMENT_DIAM _UxGT("Sr. fil.")
#define MSG_CONTRAST _UxGT("Kontrast LCD")
#define MSG_STORE_EEPROM _UxGT("Zapisz w pamieci")
#define MSG_LOAD_EEPROM _UxGT("Wczytaj z pamieci")
#define MSG_RESTORE_FAILSAFE _UxGT("Ustaw. fabryczne")
#define MSG_REFRESH _UxGT("Odswiez")
#define MSG_WATCH _UxGT("Ekran glowny")
#define MSG_PREPARE _UxGT("Przygotuj")
#define MSG_TUNE _UxGT("Strojenie")
#define MSG_PAUSE_PRINT _UxGT("Pauza")
#define MSG_RESUME_PRINT _UxGT("Wznowienie")
#define MSG_STOP_PRINT _UxGT("Stop")
#define MSG_CARD_MENU _UxGT("Karta SD")
#define MSG_NO_CARD _UxGT("Brak karty")
#define MSG_DWELL _UxGT("Uspij...")
#define MSG_USERWAIT _UxGT("Oczekiwanie...")
#define MSG_RESUMING _UxGT("Wznawianie druku")
#define MSG_PRINT_ABORTED _UxGT("Druk przerwany")
#define MSG_NO_MOVE _UxGT("Brak ruchu")
#define MSG_KILLED _UxGT("Ubity. ")
#define MSG_STOPPED _UxGT("Zatrzymany. ")
#define MSG_CONTROL_RETRACT _UxGT("Wycofaj mm")
#define MSG_CONTROL_RETRACT_SWAP _UxGT("Z Wycof. mm")
#define MSG_CONTROL_RETRACTF _UxGT("Wycofaj V")
#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Skok Z mm")
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("Cof. wycof. mm")
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Z Cof. wyc. mm")
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("Cof. wycof. V")
#define MSG_AUTORETRACT _UxGT("Auto. wycofanie")
#define MSG_FILAMENTCHANGE _UxGT("Zmien filament")
#define MSG_INIT_SDCARD _UxGT("Inicjal. karty SD")
#define MSG_CNG_SDCARD _UxGT("Zmiana karty SD")
#define MSG_ZPROBE_OUT _UxGT("Sonda Z za stolem")
#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test")
#define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch")
#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("first")
#define MSG_ZPROBE_ZOFFSET _UxGT("Offset Z")
#define MSG_BABYSTEP_X _UxGT("Babystep X")
#define MSG_BABYSTEP_Y _UxGT("Babystep Y")
#define MSG_BABYSTEP_Z _UxGT("Babystep Z")
#define MSG_ENDSTOP_ABORT _UxGT("Blad krancowki")
#define MSG_HEATING_FAILED_LCD _UxGT("Rozgrz. nieudane")
#define MSG_ERR_REDUNDANT_TEMP _UxGT("Blad temperatury")
#define MSG_THERMAL_RUNAWAY _UxGT("Zanik temp.")
#define MSG_ERR_MAXTEMP _UxGT("Err max temp")
#define MSG_ERR_MINTEMP _UxGT("Err min temp")
#define MSG_ERR_MAXTEMP_BED _UxGT("Err max temp stolu")
#define MSG_ERR_MINTEMP_BED _UxGT("Err min temp stolu")
#define MSG_ERR_Z_HOMING _UxGT("G28 Z Forbidden")
#define MSG_HALTED _UxGT("Drukarka zatrzym.")
#define MSG_PLEASE_RESET _UxGT("Prosze zresetowac")
#define MSG_SHORT_DAY _UxGT("d") // One character only
#define MSG_SHORT_HOUR _UxGT("g") // One character only
#define MSG_SHORT_MINUTE _UxGT("m") // One character only
#define MSG_HEATING _UxGT("Rozgrzewanie...")
#define MSG_HEATING_COMPLETE _UxGT("Rozgrzano")
#define MSG_BED_HEATING _UxGT("Rozgrzewanie stolu...")
#define MSG_BED_DONE _UxGT("Rozgrzano stol")
#define MSG_DELTA_CALIBRATE _UxGT("Kalibrowanie Delty")
#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibruj X")
#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibruj Y")
#define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibruj Z")
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibruj srodek")
#define MSG_INFO_MENU _UxGT("O drukarce")
#define MSG_INFO_PRINTER_MENU _UxGT("Info drukarki")
#define MSG_INFO_STATS_MENU _UxGT("Statystyki")
#define MSG_INFO_BOARD_MENU _UxGT("Board Info")
#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistory")
#define MSG_INFO_EXTRUDERS _UxGT("Ekstrudery")
#define MSG_INFO_BAUDRATE _UxGT("Predkosc USB")
#define MSG_INFO_PROTOCOL _UxGT("Protokol")
#define MSG_CASE_LIGHT _UxGT("Oswietlenie")
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT _UxGT("Wydrukowano")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Ukonczono")
#define MSG_INFO_PRINT_TIME _UxGT("Czas druku")
#define MSG_INFO_PRINT_LONGEST _UxGT("Najdl. druk")
#define MSG_INFO_PRINT_FILAMENT _UxGT("Uzyty fil.")
#else
#define MSG_INFO_PRINT_COUNT _UxGT("Wydrukowano")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Ukonczono")
#define MSG_INFO_PRINT_TIME _UxGT("Razem")
#define MSG_INFO_PRINT_LONGEST _UxGT("Najdl. druk")
#define MSG_INFO_PRINT_FILAMENT _UxGT("Uzyty fil.")
#endif
#define MSG_INFO_MIN_TEMP _UxGT("Min Temp")
#define MSG_INFO_MAX_TEMP _UxGT("Max Temp")
#define MSG_INFO_PSU _UxGT("Zasilacz")
#define MSG_DRIVE_STRENGTH _UxGT("Sila silnika")
#define MSG_DAC_PERCENT _UxGT("Sila %")
#define MSG_DAC_EEPROM_WRITE _UxGT("Zapisz DAC EEPROM")
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("ZMIEN FILAMENT")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("ZMIEN OPCJE:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Ekstruduj wiecej")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Wznow drukowanie")
#if LCD_HEIGHT >= 4
// Up to 3 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Czekam na ")
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("zmiane filamentu")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Czekam na")
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("wyjecie filamentu")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Wloz filament")
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("i nacisnij przycisk")
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("aby kontynuowac...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Czekam na")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("wlozenie filamentu")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Czekam na")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("ekstruzje filamentu")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Czekam na")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("wznowienie druku")
#else // LCD_HEIGHT < 4
// Up to 2 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Prosze czekac...")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wysuwanie...")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Wloz i nacisnij prz.")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Ladowanie...")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Ekstruzja...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wznowienie...")
#endif // LCD_HEIGHT < 4
#if LCD_HEIGHT >= 4
// Up to 3 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Czekam na ")
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("zmiane filamentu")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Czekam na")
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("wyjecie filamentu")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Wloz filament")
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("i nacisnij przycisk")
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("aby kontynuowac...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Czekam na")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("wlozenie filamentu")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Czekam na")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("ekstruzje filamentu")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Czekam na")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("wznowienie druku")
#else // LCD_HEIGHT < 4
// Up to 2 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Prosze czekac...")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wysuwanie...")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Wloz i nacisnij prz.")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Ladowanie...")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Ekstruzja...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wznowienie...")
#endif // LCD_HEIGHT < 4

View file

@ -33,441 +33,13 @@
#define DISPLAY_CHARSET_ISO10646_PL
#define MAPPER_C3C4C5_PL
/**
* One version with accented characters and one without
*/
#if ENABLED(DOGLCD)
#define WELCOME_MSG MACHINE_NAME _UxGT(" gotowy.")
#define MSG_SD_INSERTED _UxGT("Karta włożona")
#define MSG_SD_REMOVED _UxGT("Karta usunięta")
#define MSG_LCD_ENDSTOPS _UxGT("Kranców.") // Max length 8 characters
#define MSG_MAIN _UxGT("Menu główne")
#define MSG_AUTOSTART _UxGT("Autostart")
#define MSG_DISABLE_STEPPERS _UxGT("Wyłącz silniki")
#define MSG_AUTO_HOME _UxGT("Pozycja zerowa")
#define MSG_AUTO_HOME_X _UxGT("Zeruj X")
#define MSG_AUTO_HOME_Y _UxGT("Zeruj Y")
#define MSG_AUTO_HOME_Z _UxGT("Zeruj Z")
#define MSG_LEVEL_BED_HOMING _UxGT("Pozycja zerowa")
#define MSG_LEVEL_BED_WAITING _UxGT("Kliknij by rozp.")
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Następny punkt")
#define MSG_LEVEL_BED_DONE _UxGT("Wypoziomowano!")
#define MSG_SET_HOME_OFFSETS _UxGT("Ust. poz. zer.")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Poz. zerowa ust.")
#define MSG_SET_ORIGIN _UxGT("Ustaw punkt zero")
#define MSG_PREHEAT_1 _UxGT("Rozgrzej PLA")
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ")
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" wsz.")
#define MSG_PREHEAT_1_BEDONLY _UxGT("Rozgrzej stół PLA")
#define MSG_PREHEAT_1_SETTINGS _UxGT("Ustaw. rozg. PLA")
#define MSG_PREHEAT_2 _UxGT("Rozgrzej ABS")
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ")
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" wsz.")
#define MSG_PREHEAT_2_BEDONLY _UxGT("Rozgrzej stół ABS")
#define MSG_PREHEAT_2_SETTINGS _UxGT("Ustaw. rozg. ABS")
#define MSG_COOLDOWN _UxGT("Chłodzenie")
#define MSG_SWITCH_PS_ON _UxGT("Włącz zasilacz")
#define MSG_SWITCH_PS_OFF _UxGT("Wyłącz zasilacz")
#define MSG_EXTRUDE _UxGT("Ekstruzja")
#define MSG_RETRACT _UxGT("Wycofanie")
#define MSG_MOVE_AXIS _UxGT("Ruch osi")
#define MSG_BED_LEVELING _UxGT("Poziom. stołu")
#define MSG_LEVEL_BED _UxGT("Poziom. stołu")
#define MSG_MOVE_X _UxGT("Przesuń w X")
#define MSG_MOVE_Y _UxGT("Przesuń w Y")
#define MSG_MOVE_Z _UxGT("Przesuń w Z")
#define MSG_MOVE_E _UxGT("Ekstruzja (os E)")
#define MSG_MOVE_01MM _UxGT("Przesuń co .1mm")
#define MSG_MOVE_1MM _UxGT("Przesuń co 1mm")
#define MSG_MOVE_10MM _UxGT("Przesuń co 10mm")
#define MSG_SPEED _UxGT("Predkość")
#define MSG_BED_Z _UxGT("Stół Z")
#define MSG_NOZZLE _UxGT("Dysza")
#define MSG_BED _UxGT("Stół")
#define MSG_FAN_SPEED _UxGT("Obroty wiatraka")
#define MSG_FLOW _UxGT("Przepływ")
#define MSG_CONTROL _UxGT("Ustawienia")
#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Min")
#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" Max")
#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Mnożnik")
#define MSG_AUTOTEMP _UxGT("Auto. temperatura")
#define MSG_ON _UxGT("Wł. ")
#define MSG_OFF _UxGT("Wył.")
#define MSG_PID_P _UxGT("PID-P")
#define MSG_PID_I _UxGT("PID-I")
#define MSG_PID_D _UxGT("PID-D")
#define MSG_PID_C _UxGT("PID-C")
#define MSG_SELECT _UxGT("Select")
#define MSG_ACC _UxGT("Przyśpieszenie")
#define MSG_JERK _UxGT("Zryw")
#define MSG_VX_JERK _UxGT("Zryw Vx")
#define MSG_VY_JERK _UxGT("Zryw Vy")
#define MSG_VZ_JERK _UxGT("Zryw Vz")
#define MSG_VE_JERK _UxGT("Zryw Ve")
#define MSG_VMAX _UxGT("Vmax ")
#define MSG_VMIN _UxGT("Vmin")
#define MSG_VTRAV_MIN _UxGT("Vskok min")
#define MSG_ACCELERATION MSG_ACC
#define MSG_AMAX _UxGT("Amax")
#define MSG_A_RETRACT _UxGT("A-wycofanie")
#define MSG_A_TRAVEL _UxGT("A-przesuń.")
#define MSG_STEPS_PER_MM _UxGT("kroki/mm")
#define MSG_XSTEPS _UxGT("krokiX/mm")
#define MSG_YSTEPS _UxGT("krokiY/mm")
#define MSG_ZSTEPS _UxGT("krokiZ/mm")
#define MSG_ESTEPS _UxGT("krokiE/mm")
#define MSG_E1STEPS _UxGT("krokiE1/mm")
#define MSG_E2STEPS _UxGT("krokiE2/mm")
#define MSG_E3STEPS _UxGT("krokiE3/mm")
#define MSG_E4STEPS _UxGT("krokiE4/mm")
#define MSG_E5STEPS _UxGT("krokiE5/mm")
#define MSG_TEMPERATURE _UxGT("Temperatura")
#define MSG_MOTION _UxGT("Ruch")
#define MSG_FILAMENT _UxGT("Filament")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E w mm3")
#define MSG_FILAMENT_DIAM _UxGT("Śr. fil.")
#define MSG_CONTRAST _UxGT("Kontrast LCD")
#define MSG_STORE_EEPROM _UxGT("Zapisz w pamięci")
#define MSG_LOAD_EEPROM _UxGT("Wczytaj z pamięci")
#define MSG_RESTORE_FAILSAFE _UxGT("Ustaw. fabryczne")
#define MSG_REFRESH _UxGT("Odswież")
#define MSG_WATCH _UxGT("Ekran główny")
#define MSG_PREPARE _UxGT("Przygotuj")
#define MSG_TUNE _UxGT("Strojenie")
#define MSG_PAUSE_PRINT _UxGT("Pauza")
#define MSG_RESUME_PRINT _UxGT("Wznowienie")
#define MSG_STOP_PRINT _UxGT("Stop")
#define MSG_CARD_MENU _UxGT("Karta SD")
#define MSG_NO_CARD _UxGT("Brak karty")
#define MSG_DWELL _UxGT("Uśpij...")
#define MSG_USERWAIT _UxGT("Oczekiwanie...")
#define MSG_RESUMING _UxGT("Wznawianie druku")
#define MSG_PRINT_ABORTED _UxGT("Druk przerwany")
#define MSG_NO_MOVE _UxGT("Brak ruchu")
#define MSG_KILLED _UxGT("Ubity. ")
#define MSG_STOPPED _UxGT("Zatrzymany. ")
#define MSG_CONTROL_RETRACT _UxGT("Wycofaj mm")
#define MSG_CONTROL_RETRACT_SWAP _UxGT("Z Wycof. mm")
#define MSG_CONTROL_RETRACTF _UxGT("Wycofaj V")
#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Skok Z mm")
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("Cof. wycof. mm")
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Z Cof. wyc. mm")
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("Cof. wycof. V")
#define MSG_AUTORETRACT _UxGT("Auto. wycofanie")
#define MSG_FILAMENTCHANGE _UxGT("Zmień filament")
#define MSG_INIT_SDCARD _UxGT("Inicjal. karty SD")
#define MSG_CNG_SDCARD _UxGT("Zmiana karty SD")
#define MSG_ZPROBE_OUT _UxGT("Sonda Z za stołem")
#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test")
#define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch")
#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("first")
#define MSG_ZPROBE_ZOFFSET _UxGT("Offset Z")
#define MSG_BABYSTEP_X _UxGT("Babystep X")
#define MSG_BABYSTEP_Y _UxGT("Babystep Y")
#define MSG_BABYSTEP_Z _UxGT("Babystep Z")
#define MSG_ENDSTOP_ABORT _UxGT("Błąd krańcówki")
#define MSG_HEATING_FAILED_LCD _UxGT("Rozgrz. nieudane")
#define MSG_ERR_REDUNDANT_TEMP _UxGT("Błąd temperatury")
#define MSG_THERMAL_RUNAWAY _UxGT("Zanik temp.")
#define MSG_ERR_MAXTEMP _UxGT("Err max temp")
#define MSG_ERR_MINTEMP _UxGT("Err min temp")
#define MSG_ERR_MAXTEMP_BED _UxGT("Err max temp stołu")
#define MSG_ERR_MINTEMP_BED _UxGT("Err min temp stołu")
#define MSG_ERR_Z_HOMING _UxGT("G28 Z Forbidden")
#define MSG_HALTED _UxGT("Drukarka zatrzym.")
#define MSG_PLEASE_RESET _UxGT("Proszę zresetować")
#define MSG_SHORT_DAY _UxGT("d") // One character only
#define MSG_SHORT_HOUR _UxGT("g") // One character only
#define MSG_SHORT_MINUTE _UxGT("m") // One character only
#define MSG_HEATING _UxGT("Rozgrzewanie...")
#define MSG_HEATING_COMPLETE _UxGT("Rozgrzano")
#define MSG_BED_HEATING _UxGT("Rozgrzewanie stołu...")
#define MSG_BED_DONE _UxGT("Rozgrzano stół")
#define MSG_DELTA_CALIBRATE _UxGT("Kalibrowanie Delty")
#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibruj X")
#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibruj Y")
#define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibruj Z")
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibruj środek")
#define MSG_INFO_MENU _UxGT("O drukarce")
#define MSG_INFO_PRINTER_MENU _UxGT("Info drukarki")
#define MSG_INFO_STATS_MENU _UxGT("Statystyki")
#define MSG_INFO_BOARD_MENU _UxGT("Board Info")
#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistory")
#define MSG_INFO_EXTRUDERS _UxGT("Ekstrudery")
#define MSG_INFO_BAUDRATE _UxGT("Predkość USB")
#define MSG_INFO_PROTOCOL _UxGT("Protokół")
#define MSG_LIGHTS_ON _UxGT("Oświetlenie wl.")
#define MSG_LIGHTS_OFF _UxGT("Oświetlenie wyl.")
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT _UxGT("Wydrukowano")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Ukończono")
#define MSG_INFO_PRINT_TIME _UxGT("Czas druku")
#define MSG_INFO_PRINT_LONGEST _UxGT("Najdł. druk")
#define MSG_INFO_PRINT_FILAMENT _UxGT("Użyty fil.")
#include "language_pl-DOGM.h"
#else
#define MSG_INFO_PRINT_COUNT _UxGT("Wydrukowano")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Ukończono")
#define MSG_INFO_PRINT_TIME _UxGT("Razem")
#define MSG_INFO_PRINT_LONGEST _UxGT("Najdł. druk")
#define MSG_INFO_PRINT_FILAMENT _UxGT("Użyty fil.")
#endif
#define MSG_INFO_MIN_TEMP _UxGT("Min Temp")
#define MSG_INFO_MAX_TEMP _UxGT("Max Temp")
#define MSG_INFO_PSU _UxGT("Zasilacz")
#define MSG_DRIVE_STRENGTH _UxGT("Siła silnika")
#define MSG_DAC_PERCENT _UxGT("Siła %")
#define MSG_DAC_EEPROM_WRITE _UxGT("Zapisz DAC EEPROM")
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("ZMIEŃ FILAMENT")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("ZMIEŃ OPCJE:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Ekstruduj więcej")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Wznów drukowanie")
#if LCD_HEIGHT >= 4
// Up to 3 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Czekam na ")
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("zmianę filamentu")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Czekam na")
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("wyjęcie filamentu")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Włóz filament")
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("i naciśnij przycisk")
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("aby kontynuować...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Czekam na")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("włożenie filamentu")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Czekam na")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("ekstruzję filamentu")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Czekam na")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("wznowienie druku")
#else // LCD_HEIGHT < 4
// Up to 2 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Proszę czekać...")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wysuwanie...")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Włóż i naciśnij prz.")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Ładowanie...")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Ekstruzja...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wznowienie...")
#endif // LCD_HEIGHT < 4
#else
#define WELCOME_MSG MACHINE_NAME _UxGT(" gotowy.")
#define MSG_SD_INSERTED _UxGT("Karta wlozona")
#define MSG_SD_REMOVED _UxGT("Karta usunieta")
#define MSG_LCD_ENDSTOPS _UxGT("Krancow.") // Max length 8 characters
#define MSG_MAIN _UxGT("Menu glowne")
#define MSG_AUTOSTART _UxGT("Autostart")
#define MSG_DISABLE_STEPPERS _UxGT("Wylacz silniki")
#define MSG_AUTO_HOME _UxGT("Pozycja zerowa")
#define MSG_AUTO_HOME_X _UxGT("Zeruj X")
#define MSG_AUTO_HOME_Y _UxGT("Zeruj Y")
#define MSG_AUTO_HOME_Z _UxGT("Zeruj Z")
#define MSG_LEVEL_BED_HOMING _UxGT("Pozycja zerowa")
#define MSG_LEVEL_BED_WAITING _UxGT("Kliknij by rozp.")
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Nastepny punkt")
#define MSG_LEVEL_BED_DONE _UxGT("Wypoziomowano!")
#define MSG_SET_HOME_OFFSETS _UxGT("Ust. poz. zer.")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Poz. zerowa ust.")
#define MSG_SET_ORIGIN _UxGT("Ustaw punkt zero")
#define MSG_PREHEAT_1 _UxGT("Rozgrzej PLA")
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ")
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" wsz.")
#define MSG_PREHEAT_1_BEDONLY _UxGT("Rozgrzej stol PLA")
#define MSG_PREHEAT_1_SETTINGS _UxGT("Ustaw. rozg. PLA")
#define MSG_PREHEAT_2 _UxGT("Rozgrzej ABS")
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ")
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" wsz.")
#define MSG_PREHEAT_2_BEDONLY _UxGT("Rozgrzej stol ABS")
#define MSG_PREHEAT_2_SETTINGS _UxGT("Ustaw. rozg. ABS")
#define MSG_COOLDOWN _UxGT("Chlodzenie")
#define MSG_SWITCH_PS_ON _UxGT("Wlacz zasilacz")
#define MSG_SWITCH_PS_OFF _UxGT("Wylacz zasilacz")
#define MSG_EXTRUDE _UxGT("Ekstruzja")
#define MSG_RETRACT _UxGT("Wycofanie")
#define MSG_MOVE_AXIS _UxGT("Ruch osi")
#define MSG_BED_LEVELING _UxGT("Poziom. stolu")
#define MSG_LEVEL_BED _UxGT("Poziom. stolu")
#define MSG_MOVE_X _UxGT("Przesun w X")
#define MSG_MOVE_Y _UxGT("Przesun w Y")
#define MSG_MOVE_Z _UxGT("Przesun w Z")
#define MSG_MOVE_E _UxGT("Ekstruzja (os E)")
#define MSG_MOVE_01MM _UxGT("Przesun co .1mm")
#define MSG_MOVE_1MM _UxGT("Przesun co 1mm")
#define MSG_MOVE_10MM _UxGT("Przesun co 10mm")
#define MSG_SPEED _UxGT("Predkosc")
#define MSG_BED_Z _UxGT("Stol Z")
#define MSG_NOZZLE _UxGT("Dysza")
#define MSG_BED _UxGT("Stol")
#define MSG_FAN_SPEED _UxGT("Obroty wiatraka")
#define MSG_FLOW _UxGT("Przeplyw")
#define MSG_CONTROL _UxGT("Ustawienia")
#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Min")
#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" Max")
#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Mnoznik")
#define MSG_AUTOTEMP _UxGT("Auto. temperatura")
#define MSG_ON _UxGT("Wl. ")
#define MSG_OFF _UxGT("Wyl.")
#define MSG_PID_P _UxGT("PID-P")
#define MSG_PID_I _UxGT("PID-I")
#define MSG_PID_D _UxGT("PID-D")
#define MSG_PID_C _UxGT("PID-C")
#define MSG_SELECT _UxGT("Select")
#define MSG_ACC _UxGT("Przyspieszenie")
#define MSG_JERK _UxGT("Zryw")
#define MSG_VX_JERK _UxGT("Zryw Vx")
#define MSG_VY_JERK _UxGT("Zryw Vy")
#define MSG_VZ_JERK _UxGT("Zryw Vz")
#define MSG_VE_JERK _UxGT("Zryw Ve")
#define MSG_VMAX _UxGT("Vmax ")
#define MSG_VMIN _UxGT("Vmin")
#define MSG_VTRAV_MIN _UxGT("Vskok min")
#define MSG_ACCELERATION MSG_ACC
#define MSG_AMAX _UxGT("Amax")
#define MSG_A_RETRACT _UxGT("A-wycofanie")
#define MSG_A_TRAVEL _UxGT("A-przesun.")
#define MSG_STEPS_PER_MM _UxGT("kroki/mm")
#define MSG_XSTEPS _UxGT("krokiX/mm")
#define MSG_YSTEPS _UxGT("krokiY/mm")
#define MSG_ZSTEPS _UxGT("krokiZ/mm")
#define MSG_ESTEPS _UxGT("krokiE/mm")
#define MSG_E1STEPS _UxGT("krokiE1/mm")
#define MSG_E2STEPS _UxGT("krokiE2/mm")
#define MSG_E3STEPS _UxGT("krokiE3/mm")
#define MSG_E4STEPS _UxGT("krokiE4/mm")
#define MSG_E5STEPS _UxGT("krokiE5/mm")
#define MSG_TEMPERATURE _UxGT("Temperatura")
#define MSG_MOTION _UxGT("Ruch")
#define MSG_FILAMENT _UxGT("Filament")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E w mm3")
#define MSG_FILAMENT_DIAM _UxGT("Sr. fil.")
#define MSG_CONTRAST _UxGT("Kontrast LCD")
#define MSG_STORE_EEPROM _UxGT("Zapisz w pamieci")
#define MSG_LOAD_EEPROM _UxGT("Wczytaj z pamieci")
#define MSG_RESTORE_FAILSAFE _UxGT("Ustaw. fabryczne")
#define MSG_REFRESH _UxGT("Odswiez")
#define MSG_WATCH _UxGT("Ekran glowny")
#define MSG_PREPARE _UxGT("Przygotuj")
#define MSG_TUNE _UxGT("Strojenie")
#define MSG_PAUSE_PRINT _UxGT("Pauza")
#define MSG_RESUME_PRINT _UxGT("Wznowienie")
#define MSG_STOP_PRINT _UxGT("Stop")
#define MSG_CARD_MENU _UxGT("Karta SD")
#define MSG_NO_CARD _UxGT("Brak karty")
#define MSG_DWELL _UxGT("Uspij...")
#define MSG_USERWAIT _UxGT("Oczekiwanie...")
#define MSG_RESUMING _UxGT("Wznawianie druku")
#define MSG_PRINT_ABORTED _UxGT("Druk przerwany")
#define MSG_NO_MOVE _UxGT("Brak ruchu")
#define MSG_KILLED _UxGT("Ubity. ")
#define MSG_STOPPED _UxGT("Zatrzymany. ")
#define MSG_CONTROL_RETRACT _UxGT("Wycofaj mm")
#define MSG_CONTROL_RETRACT_SWAP _UxGT("Z Wycof. mm")
#define MSG_CONTROL_RETRACTF _UxGT("Wycofaj V")
#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Skok Z mm")
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("Cof. wycof. mm")
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Z Cof. wyc. mm")
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("Cof. wycof. V")
#define MSG_AUTORETRACT _UxGT("Auto. wycofanie")
#define MSG_FILAMENTCHANGE _UxGT("Zmien filament")
#define MSG_INIT_SDCARD _UxGT("Inicjal. karty SD")
#define MSG_CNG_SDCARD _UxGT("Zmiana karty SD")
#define MSG_ZPROBE_OUT _UxGT("Sonda Z za stolem")
#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test")
#define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch")
#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("first")
#define MSG_ZPROBE_ZOFFSET _UxGT("Offset Z")
#define MSG_BABYSTEP_X _UxGT("Babystep X")
#define MSG_BABYSTEP_Y _UxGT("Babystep Y")
#define MSG_BABYSTEP_Z _UxGT("Babystep Z")
#define MSG_ENDSTOP_ABORT _UxGT("Blad krancowki")
#define MSG_HEATING_FAILED_LCD _UxGT("Rozgrz. nieudane")
#define MSG_ERR_REDUNDANT_TEMP _UxGT("Blad temperatury")
#define MSG_THERMAL_RUNAWAY _UxGT("Zanik temp.")
#define MSG_ERR_MAXTEMP _UxGT("Err max temp")
#define MSG_ERR_MINTEMP _UxGT("Err min temp")
#define MSG_ERR_MAXTEMP_BED _UxGT("Err max temp stolu")
#define MSG_ERR_MINTEMP_BED _UxGT("Err min temp stolu")
#define MSG_ERR_Z_HOMING _UxGT("G28 Z Forbidden")
#define MSG_HALTED _UxGT("Drukarka zatrzym.")
#define MSG_PLEASE_RESET _UxGT("Prosze zresetowac")
#define MSG_SHORT_DAY _UxGT("d") // One character only
#define MSG_SHORT_HOUR _UxGT("g") // One character only
#define MSG_SHORT_MINUTE _UxGT("m") // One character only
#define MSG_HEATING _UxGT("Rozgrzewanie...")
#define MSG_HEATING_COMPLETE _UxGT("Rozgrzano")
#define MSG_BED_HEATING _UxGT("Rozgrzewanie stolu...")
#define MSG_BED_DONE _UxGT("Rozgrzano stol")
#define MSG_DELTA_CALIBRATE _UxGT("Kalibrowanie Delty")
#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibruj X")
#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibruj Y")
#define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibruj Z")
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibruj srodek")
#define MSG_INFO_MENU _UxGT("O drukarce")
#define MSG_INFO_PRINTER_MENU _UxGT("Info drukarki")
#define MSG_INFO_STATS_MENU _UxGT("Statystyki")
#define MSG_INFO_BOARD_MENU _UxGT("Board Info")
#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistory")
#define MSG_INFO_EXTRUDERS _UxGT("Ekstrudery")
#define MSG_INFO_BAUDRATE _UxGT("Predkosc USB")
#define MSG_INFO_PROTOCOL _UxGT("Protokol")
#define MSG_LIGHTS_ON _UxGT("Oswietlenie wl.")
#define MSG_LIGHTS_OFF _UxGT("Oswietlenie wyl.")
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT _UxGT("Wydrukowano")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Ukonczono")
#define MSG_INFO_PRINT_TIME _UxGT("Czas druku")
#define MSG_INFO_PRINT_LONGEST _UxGT("Najdl. druk")
#define MSG_INFO_PRINT_FILAMENT _UxGT("Uzyty fil.")
#else
#define MSG_INFO_PRINT_COUNT _UxGT("Wydrukowano")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Ukonczono")
#define MSG_INFO_PRINT_TIME _UxGT("Razem")
#define MSG_INFO_PRINT_LONGEST _UxGT("Najdl. druk")
#define MSG_INFO_PRINT_FILAMENT _UxGT("Uzyty fil.")
#endif
#define MSG_INFO_MIN_TEMP _UxGT("Min Temp")
#define MSG_INFO_MAX_TEMP _UxGT("Max Temp")
#define MSG_INFO_PSU _UxGT("Zasilacz")
#define MSG_DRIVE_STRENGTH _UxGT("Sila silnika")
#define MSG_DAC_PERCENT _UxGT("Sila %")
#define MSG_DAC_EEPROM_WRITE _UxGT("Zapisz DAC EEPROM")
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Ekstruduj wiecej")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Wznow drukowanie")
#if LCD_HEIGHT >= 4
// Up to 3 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Czekam na ")
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("zmiane filamentu")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Czekam na")
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("wyjecie filamentu")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Wloz filament")
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("i nacisnij przycisk")
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("aby kontynuowac...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Czekam na")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("wlozenie filamentu")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Czekam na")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("ekstruzje filamentu")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Czekam na")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("wznowienie druku")
#else // LCD_HEIGHT < 4
// Up to 2 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Prosze czekac...")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wysuwanie...")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Wloz i nacisnij prz.")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Ladowanie...")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Ekstruzja...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wznowienie...")
#endif // LCD_HEIGHT < 4
#include "language_pl-HD44780.h"
#endif
#endif // LANGUAGE_PL_H

View file

@ -206,8 +206,7 @@
#define MSG_INFO_EXTRUDERS _UxGT("Ekstruderler") // Ekstruderler
#define MSG_INFO_BAUDRATE _UxGT("İletişim Hızı") // İletişim Hızı
#define MSG_INFO_PROTOCOL _UxGT("Protokol") // Protokol
#define MSG_LIGHTS_ON _UxGT("Aydınlatmayı Aç") // Aydınlatmayı
#define MSG_LIGHTS_OFF _UxGT("Aydınlatmayı Kapa") // Aydınlaymayı Kapa
#define MSG_CASE_LIGHT _UxGT("Aydınlatmayı") // Aydınlatmayı
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT _UxGT("Baskı Sayısı") // Baskı Sayısı

View file

@ -180,8 +180,7 @@
#define MSG_INFO_EXTRUDERS _UxGT("Екструдери")
#define MSG_INFO_BAUDRATE _UxGT("біт/с")
#define MSG_INFO_PROTOCOL _UxGT("Протокол")
#define MSG_LIGHTS_ON _UxGT("Підсвітка увік.")
#define MSG_LIGHTS_OFF _UxGT("Підсвітка вимк.")
#define MSG_CASE_LIGHT _UxGT("Підсвітка")
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT _UxGT("К-сть друків")

View file

@ -708,19 +708,6 @@ void kill_screen(const char* lcd_msg) {
#endif // SDSUPPORT
#if ENABLED(MENU_ITEM_CASE_LIGHT)
extern bool case_light_on;
extern void update_case_light();
void toggle_case_light() {
case_light_on ^= true;
lcdDrawUpdate = LCDVIEW_KEEP_REDRAWING;
update_case_light();
}
#endif // MENU_ITEM_CASE_LIGHT
#if ENABLED(BLTOUCH)
/**
@ -790,6 +777,11 @@ void kill_screen(const char* lcd_msg) {
*
*/
#if ENABLED(MENU_ITEM_CASE_LIGHT)
extern bool case_light_on;
extern void update_case_light();
#endif
void lcd_main_menu() {
START_MENU();
MENU_BACK(MSG_WATCH);
@ -805,10 +797,7 @@ void kill_screen(const char* lcd_msg) {
// Switch case light on/off
//
#if ENABLED(MENU_ITEM_CASE_LIGHT)
if (case_light_on)
MENU_ITEM(function, MSG_LIGHTS_OFF, toggle_case_light);
else
MENU_ITEM(function, MSG_LIGHTS_ON, toggle_case_light);
MENU_ITEM_EDIT_CALLBACK(bool, MSG_CASE_LIGHT, case_light_on, update_case_light);
#endif
if (planner.movesplanned() || IS_SD_PRINTING) {