HAL SPI pin init cleanup

This commit is contained in:
Scott Lahteine 2019-06-14 20:16:22 -05:00
parent cfb44e4a26
commit 26de051e92
6 changed files with 71 additions and 73 deletions

View file

@ -21,12 +21,12 @@
*/
/**
* Originally from Arduino Sd2Card Library
* Adapted from Arduino Sd2Card Library
* Copyright (C) 2009 by William Greiman
*/
/**
* Description: HAL for AVR - SPI functions
* HAL for AVR - SPI functions
*/
#ifdef __AVR__
@ -37,35 +37,24 @@
#include "../../inc/MarlinConfig.h"
// --------------------------------------------------------------------------
// Public Variables
// --------------------------------------------------------------------------
// --------------------------------------------------------------------------
// Public functions
// --------------------------------------------------------------------------
void spiBegin (void) {
SET_OUTPUT(SS_PIN);
WRITE(SS_PIN, HIGH);
void spiBegin(void) {
OUT_WRITE(SS_PIN, HIGH);
SET_OUTPUT(SCK_PIN);
SET_INPUT(MISO_PIN);
SET_OUTPUT(MOSI_PIN);
#if DISABLED(SOFTWARE_SPI)
// SS must be in output mode even it is not chip select
SET_OUTPUT(SS_PIN);
//SET_OUTPUT(SS_PIN);
// set SS high - may be chip select for another SPI device
#if SET_SPI_SS_HIGH
WRITE(SS_PIN, HIGH);
#endif // SET_SPI_SS_HIGH
//#if SET_SPI_SS_HIGH
//WRITE(SS_PIN, HIGH);
//#endif
// set a default rate
spiInit(1);
#endif // SOFTWARE_SPI
#endif
}
#if DISABLED(SOFTWARE_SPI, FORCE_SOFT_SPI)
//------------------------------------------------------------------------------
@ -190,22 +179,26 @@ void spiBegin (void) {
}
#else
#else // SOFTWARE_SPI || FORCE_SOFT_SPI
/** nop to tune soft SPI timing */
//------------------------------------------------------------------------------
// Software SPI
//------------------------------------------------------------------------------
// nop to tune soft SPI timing
#define nop asm volatile ("\tnop\n")
/** Set SPI rate */
// Set SPI rate
void spiInit(uint8_t spiRate) {
UNUSED(spiRate); // nothing to do
}
/** Begin SPI transaction, set clock, bit order, data mode */
// Begin SPI transaction, set clock, bit order, data mode
void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) {
UNUSED(spiBeginTransaction); // nothing to do
}
/** Soft SPI receive byte */
// Soft SPI receive byte
uint8_t spiRec() {
uint8_t data = 0;
// no interrupts during byte receive - about 8µs
@ -230,13 +223,13 @@ void spiBegin (void) {
return data;
}
/** Soft SPI read data */
// Soft SPI read data
void spiRead(uint8_t* buf, uint16_t nbyte) {
for (uint16_t i = 0; i < nbyte; i++)
buf[i] = spiRec();
}
/** Soft SPI send byte */
// Soft SPI send byte
void spiSend(uint8_t data) {
// no interrupts during byte send - about 8µs
cli();
@ -257,13 +250,13 @@ void spiBegin (void) {
sei();
}
/** Soft SPI send block */
// Soft SPI send block
void spiSendBlock(uint8_t token, const uint8_t* buf) {
spiSend(token);
for (uint16_t i = 0; i < 512; i++)
spiSend(buf[i]);
}
#endif // SOFTWARE_SPI, FORCE_SOFT_SPI
#endif // SOFTWARE_SPI || FORCE_SOFT_SPI
#endif // __AVR__

View file

@ -38,14 +38,12 @@ void spiBegin(void) {
#if !PIN_EXISTS(SS)
#error "SS_PIN not defined!"
#endif
SET_OUTPUT(SS_PIN);
WRITE(SS_PIN, HIGH);
OUT_WRITE(SS_PIN, HIGH);
SET_OUTPUT(SCK_PIN);
SET_INPUT(MISO_PIN);
SET_OUTPUT(MOSI_PIN);
//#if DISABLED(SOFTWARE_SPI)
#if 0
#if 0 && DISABLED(SOFTWARE_SPI)
// set SS high - may be chip select for another SPI device
#if SET_SPI_SS_HIGH
WRITE(SS_PIN, HIGH);

View file

@ -23,7 +23,7 @@
#include <Servo.h>
// Inherit and expand on the official library
// Inherit and expand on core Servo library
class libServo : public Servo {
public:
int8_t attach(const int pin);
@ -32,5 +32,5 @@ class libServo : public Servo {
private:
uint16_t min_ticks;
uint16_t max_ticks;
uint8_t servoIndex; // index into the channel data for this servo
uint8_t servoIndex; // Index into the channel data for this servo
};

View file

@ -1,3 +1,24 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#if defined(__MK64FX512__) || defined(__MK66FX1M0__)
#include "HAL.h"
@ -8,32 +29,27 @@
static SPISettings spiConfig;
// Standard SPI functions
/** Initialize SPI bus */
void spiBegin(void) {
#if !PIN_EXISTS(SS)
#error SS_PIN not defined!
#endif
SET_OUTPUT(SS_PIN);
WRITE(SS_PIN, HIGH);
OUT_WRITE(SS_PIN, HIGH);
SET_OUTPUT(SCK_PIN);
SET_INPUT(MISO_PIN);
SET_OUTPUT(MOSI_PIN);
//#if DISABLED(SOFTWARE_SPI)
#if 0
#if 0 && DISABLED(SOFTWARE_SPI)
// set SS high - may be chip select for another SPI device
#if SET_SPI_SS_HIGH
WRITE(SS_PIN, HIGH);
#endif // SET_SPI_SS_HIGH
#endif
// set a default rate
spiInit(SPI_HALF_SPEED); // 1
#endif // SOFTWARE_SPI
#endif
}
/** Configure SPI for specified SPI speed */
void spiInit(uint8_t spiRate) {
// Use datarates Marlin uses
// Use Marlin data-rates
uint32_t clock;
switch (spiRate) {
case SPI_FULL_SPEED: clock = 10000000; break;
@ -49,44 +65,39 @@ void spiInit(uint8_t spiRate) {
SPI.begin();
}
//------------------------------------------------------------------------------
/** SPI receive a byte */
uint8_t spiRec(void) {
SPI.beginTransaction(spiConfig);
uint8_t returnByte = SPI.transfer(0xFF);
SPI.endTransaction();
return returnByte;
// SPDR = 0xFF;
// while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
// return SPDR;
//SPDR = 0xFF;
//while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
//return SPDR;
}
//------------------------------------------------------------------------------
/** SPI read data */
void spiRead(uint8_t* buf, uint16_t nbyte) {
SPI.beginTransaction(spiConfig);
SPI.transfer(buf, nbyte);
SPI.endTransaction();
//if (nbyte-- == 0) return;
// SPDR = 0xFF;
//for (uint16_t i = 0; i < nbyte; i++) {
// while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
// buf[i] = SPDR;
// SPDR = 0xFF;
//}
//while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
//buf[nbyte] = SPDR;
//if (nbyte-- == 0) return;
// SPDR = 0xFF;
//for (uint16_t i = 0; i < nbyte; i++) {
// while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
// buf[i] = SPDR;
// SPDR = 0xFF;
//}
//while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
//buf[nbyte] = SPDR;
}
//------------------------------------------------------------------------------
/** SPI send a byte */
void spiSend(uint8_t b) {
SPI.beginTransaction(spiConfig);
SPI.transfer(b);
SPI.endTransaction();
// SPDR = b;
// while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
//SPDR = b;
//while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
}
//------------------------------------------------------------------------------
/** SPI send block */
void spiSendBlock(uint8_t token, const uint8_t* buf) {
SPI.beginTransaction(spiConfig);
SPDR = token;
@ -100,11 +111,9 @@ void spiSendBlock(uint8_t token, const uint8_t* buf) {
SPI.endTransaction();
}
/** Begin SPI transaction, set clock, bit order, data mode */
// Begin SPI transaction, set clock, bit order, data mode
void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) {
spiConfig = SPISettings(spiClock, bitOrder, dataMode);
SPI.beginTransaction(spiConfig);
}

View file

@ -20,7 +20,6 @@
*
*/
/**
* Teensy3.5 __MK64FX512__
* Teensy3.6 __MK66FX1M0__

View file

@ -115,5 +115,4 @@ void eeprom_update_block(const void* src, void* eeprom_address, size_t n) {
delay(7); // wait for page write to complete
}
#endif // ENABLED(SPI_EEPROM)
#endif // SPI_EEPROM