IsStopped / IsRunning inline

This commit is contained in:
Scott Lahteine 2015-04-08 00:56:19 -07:00
parent cf9b58452c
commit 27cb90da8b
3 changed files with 29 additions and 23 deletions

View file

@ -219,7 +219,9 @@ void Stop();
void filrunout(); void filrunout();
#endif #endif
bool IsStopped(); extern bool Running;
inline bool IsRunning() { return Running; }
inline bool IsStopped() { return !Running; }
bool enquecommand(const char *cmd); //put a single ASCII command at the end of the current buffer or return false when it is full bool enquecommand(const char *cmd); //put a single ASCII command at the end of the current buffer or return false when it is full
void enquecommands_P(const char *cmd); //put one or many ASCII commands at the end of the current buffer, read from flash void enquecommands_P(const char *cmd); //put one or many ASCII commands at the end of the current buffer, read from flash

View file

@ -202,6 +202,16 @@
CardReader card; CardReader card;
#endif #endif
bool Running = true;
static float feedrate = 1500.0, next_feedrate, saved_feedrate;
static float current_position[NUM_AXIS] = { 0.0 };
static float destination[NUM_AXIS] = { 0.0 };
bool axis_known_position[3] = { false };
static long gcode_N, gcode_LastN, Stopped_gcode_LastN = 0;
static char cmdbuffer[BUFSIZE][MAX_CMD_SIZE];
float homing_feedrate[] = HOMING_FEEDRATE; float homing_feedrate[] = HOMING_FEEDRATE;
bool axis_relative_modes[] = AXIS_RELATIVE_MODES; bool axis_relative_modes[] = AXIS_RELATIVE_MODES;
int feedmultiply = 100; //100->1 200->2 int feedmultiply = 100; //100->1 200->2
@ -210,23 +220,20 @@ int extruder_multiply[EXTRUDERS] = ARRAY_BY_EXTRUDERS(100, 100, 100, 100);
bool volumetric_enabled = false; bool volumetric_enabled = false;
float filament_size[EXTRUDERS] = ARRAY_BY_EXTRUDERS(DEFAULT_NOMINAL_FILAMENT_DIA, DEFAULT_NOMINAL_FILAMENT_DIA, DEFAULT_NOMINAL_FILAMENT_DIA, DEFAULT_NOMINAL_FILAMENT_DIA); float filament_size[EXTRUDERS] = ARRAY_BY_EXTRUDERS(DEFAULT_NOMINAL_FILAMENT_DIA, DEFAULT_NOMINAL_FILAMENT_DIA, DEFAULT_NOMINAL_FILAMENT_DIA, DEFAULT_NOMINAL_FILAMENT_DIA);
float volumetric_multiplier[EXTRUDERS] = ARRAY_BY_EXTRUDERS(1.0, 1.0, 1.0, 1.0); float volumetric_multiplier[EXTRUDERS] = ARRAY_BY_EXTRUDERS(1.0, 1.0, 1.0, 1.0);
float current_position[NUM_AXIS] = { 0.0 };
float home_offset[3] = { 0 }; float home_offset[3] = { 0 };
float min_pos[3] = { X_MIN_POS, Y_MIN_POS, Z_MIN_POS }; float min_pos[3] = { X_MIN_POS, Y_MIN_POS, Z_MIN_POS };
float max_pos[3] = { X_MAX_POS, Y_MAX_POS, Z_MAX_POS }; float max_pos[3] = { X_MAX_POS, Y_MAX_POS, Z_MAX_POS };
bool axis_known_position[3] = { false };
uint8_t active_extruder = 0; uint8_t active_extruder = 0;
int fanSpeed = 0; int fanSpeed = 0;
bool cancel_heatup = false; bool cancel_heatup = false;
const char errormagic[] PROGMEM = "Error:"; const char errormagic[] PROGMEM = "Error:";
const char echomagic[] PROGMEM = "echo:"; const char echomagic[] PROGMEM = "echo:";
const char axis_codes[NUM_AXIS] = {'X', 'Y', 'Z', 'E'}; const char axis_codes[NUM_AXIS] = {'X', 'Y', 'Z', 'E'};
static float destination[NUM_AXIS] = { 0 };
static float offset[3] = { 0 }; static float offset[3] = { 0 };
static float feedrate = 1500.0, next_feedrate, saved_feedrate;
static long gcode_N, gcode_LastN, Stopped_gcode_LastN = 0;
static bool relative_mode = false; //Determines Absolute or Relative Coordinates static bool relative_mode = false; //Determines Absolute or Relative Coordinates
static char cmdbuffer[BUFSIZE][MAX_CMD_SIZE];
static int bufindr = 0; static int bufindr = 0;
static int bufindw = 0; static int bufindw = 0;
static int buflen = 0; static int buflen = 0;
@ -243,7 +250,6 @@ static unsigned long stepper_inactive_time = DEFAULT_STEPPER_DEACTIVE_TIME*1000l
unsigned long starttime = 0; ///< Print job start time unsigned long starttime = 0; ///< Print job start time
unsigned long stoptime = 0; ///< Print job stop time unsigned long stoptime = 0; ///< Print job stop time
static uint8_t target_extruder; static uint8_t target_extruder;
bool Stopped = false;
bool CooldownNoWait = true; bool CooldownNoWait = true;
bool target_direction; bool target_direction;
@ -743,7 +749,7 @@ void get_command()
case 1: case 1:
case 2: case 2:
case 3: case 3:
if (Stopped == true) { if (IsStopped()) {
SERIAL_ERRORLNPGM(MSG_ERR_STOPPED); SERIAL_ERRORLNPGM(MSG_ERR_STOPPED);
LCD_MESSAGEPGM(MSG_STOPPED); LCD_MESSAGEPGM(MSG_STOPPED);
} }
@ -1240,7 +1246,7 @@ inline void set_destination_to_current() { memcpy(destination, current_position,
if (z_min_endstop) if (z_min_endstop)
#endif #endif
{ {
if (!Stopped) { if (IsRunning()) {
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ERRORLNPGM("Z-Probe failed to engage!"); SERIAL_ERRORLNPGM("Z-Probe failed to engage!");
LCD_ALERTMESSAGEPGM("Err: ZPROBE"); LCD_ALERTMESSAGEPGM("Err: ZPROBE");
@ -1315,7 +1321,7 @@ inline void set_destination_to_current() { memcpy(destination, current_position,
if (!z_min_endstop) if (!z_min_endstop)
#endif #endif
{ {
if (!Stopped) { if (IsRunning()) {
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ERRORLNPGM("Z-Probe failed to retract!"); SERIAL_ERRORLNPGM("Z-Probe failed to retract!");
LCD_ALERTMESSAGEPGM("Err: ZPROBE"); LCD_ALERTMESSAGEPGM("Err: ZPROBE");
@ -1650,7 +1656,7 @@ static void homeaxis(AxisEnum axis) {
* G0, G1: Coordinated movement of X Y Z E axes * G0, G1: Coordinated movement of X Y Z E axes
*/ */
inline void gcode_G0_G1() { inline void gcode_G0_G1() {
if (!Stopped) { if (IsRunning()) {
get_coordinates(); // For X Y Z E F get_coordinates(); // For X Y Z E F
#ifdef FWRETRACT #ifdef FWRETRACT
if (autoretract_enabled) if (autoretract_enabled)
@ -1675,7 +1681,7 @@ inline void gcode_G0_G1() {
* G3: Counterclockwise Arc * G3: Counterclockwise Arc
*/ */
inline void gcode_G2_G3(bool clockwise) { inline void gcode_G2_G3(bool clockwise) {
if (!Stopped) { if (IsRunning()) {
get_arc_coordinates(); get_arc_coordinates();
prepare_arc_move(clockwise); prepare_arc_move(clockwise);
} }
@ -4119,7 +4125,7 @@ inline void gcode_M303() {
bool SCARA_move_to_cal(uint8_t delta_x, uint8_t delta_y) { bool SCARA_move_to_cal(uint8_t delta_x, uint8_t delta_y) {
//SoftEndsEnabled = false; // Ignore soft endstops during calibration //SoftEndsEnabled = false; // Ignore soft endstops during calibration
//SERIAL_ECHOLN(" Soft endstops disabled "); //SERIAL_ECHOLN(" Soft endstops disabled ");
if (! Stopped) { if (IsRunning()) {
//get_coordinates(); // For X Y Z E F //get_coordinates(); // For X Y Z E F
delta[X_AXIS] = delta_x; delta[X_AXIS] = delta_x;
delta[Y_AXIS] = delta_y; delta[Y_AXIS] = delta_y;
@ -4617,7 +4623,7 @@ inline void gcode_M907() {
* M999: Restart after being stopped * M999: Restart after being stopped
*/ */
inline void gcode_M999() { inline void gcode_M999() {
Stopped = false; Running = true;
lcd_reset_alert_level(); lcd_reset_alert_level();
gcode_LastN = Stopped_gcode_LastN; gcode_LastN = Stopped_gcode_LastN;
FlushSerialRequestResend(); FlushSerialRequestResend();
@ -4652,7 +4658,7 @@ inline void gcode_T() {
// Save current position to return to after applying extruder offset // Save current position to return to after applying extruder offset
set_destination_to_current(); set_destination_to_current();
#ifdef DUAL_X_CARRIAGE #ifdef DUAL_X_CARRIAGE
if (dual_x_carriage_mode == DXC_AUTO_PARK_MODE && Stopped == false && if (dual_x_carriage_mode == DXC_AUTO_PARK_MODE && IsRunning() &&
(delayed_move_time != 0 || current_position[X_AXIS] != x_home_pos(active_extruder))) { (delayed_move_time != 0 || current_position[X_AXIS] != x_home_pos(active_extruder))) {
// Park old head: 1) raise 2) move to park position 3) lower // Park old head: 1) raise 2) move to park position 3) lower
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS] + TOOLCHANGE_PARK_ZLIFT, plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS] + TOOLCHANGE_PARK_ZLIFT,
@ -4710,7 +4716,7 @@ inline void gcode_T() {
sync_plan_position(); sync_plan_position();
#endif #endif
// Move to the old position if 'F' was in the parameters // Move to the old position if 'F' was in the parameters
if (make_move && !Stopped) prepare_move(); if (make_move && IsRunning()) prepare_move();
} }
#ifdef EXT_SOLENOID #ifdef EXT_SOLENOID
@ -5877,7 +5883,7 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) {
#ifdef DUAL_X_CARRIAGE #ifdef DUAL_X_CARRIAGE
// handle delayed move timeout // handle delayed move timeout
if (delayed_move_time && ms > delayed_move_time + 1000 && !Stopped) { if (delayed_move_time && ms > delayed_move_time + 1000 && IsRunning()) {
// travel moves have been received so enact them // travel moves have been received so enact them
delayed_move_time = 0xFFFFFFFFUL; // force moves to be done delayed_move_time = 0xFFFFFFFFUL; // force moves to be done
set_destination_to_current(); set_destination_to_current();
@ -5928,8 +5934,8 @@ void kill()
void Stop() void Stop()
{ {
disable_heater(); disable_heater();
if(Stopped == false) { if (IsRunning()) {
Stopped = true; Running = false;
Stopped_gcode_LastN = gcode_LastN; // Save last g_code for restart Stopped_gcode_LastN = gcode_LastN; // Save last g_code for restart
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ERRORLNPGM(MSG_ERR_STOPPED); SERIAL_ERRORLNPGM(MSG_ERR_STOPPED);
@ -5937,8 +5943,6 @@ void Stop()
} }
} }
bool IsStopped() { return Stopped; };
#ifdef FAST_PWM_FAN #ifdef FAST_PWM_FAN
void setPwmFrequency(uint8_t pin, int val) void setPwmFrequency(uint8_t pin, int val)
{ {

View file

@ -443,7 +443,7 @@ void checkExtruderAutoFans()
// Temperature Error Handlers // Temperature Error Handlers
// //
inline void _temp_error(int e, const char *msg1, const char *msg2) { inline void _temp_error(int e, const char *msg1, const char *msg2) {
if (!IsStopped()) { if (IsRunning()) {
SERIAL_ERROR_START; SERIAL_ERROR_START;
if (e >= 0) SERIAL_ERRORLN((int)e); if (e >= 0) SERIAL_ERRORLN((int)e);
serialprintPGM(msg1); serialprintPGM(msg1);