[2.0.x] BIBO Cyclops (#9541)
This commit is contained in:
shaktee
Scott Lahteine
parent
2014d38e10
commit
27faeafc1b
3 changed files with 1851 additions and 11 deletions
1819
Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
Normal file
1819
Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
Normal file
|
|
@ -0,0 +1,1819 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
/**
|
||||
* Configuration.h
|
||||
*
|
||||
* Basic settings such as:
|
||||
*
|
||||
* - Type of electronics
|
||||
* - Type of temperature sensor
|
||||
* - Printer geometry
|
||||
* - Endstop configuration
|
||||
* - LCD controller
|
||||
* - Extra features
|
||||
*
|
||||
* Advanced settings can be found in Configuration_adv.h
|
||||
*
|
||||
*/
|
||||
#ifndef CONFIGURATION_H
|
||||
#define CONFIGURATION_H
|
||||
#define CONFIGURATION_H_VERSION 020000
|
||||
|
||||
//===========================================================================
|
||||
//============================= Getting Started =============================
|
||||
//===========================================================================
|
||||
|
||||
/**
|
||||
* Here are some standard links for getting your machine calibrated:
|
||||
*
|
||||
* http://reprap.org/wiki/Calibration
|
||||
* http://youtu.be/wAL9d7FgInk
|
||||
* http://calculator.josefprusa.cz
|
||||
* http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide
|
||||
* http://www.thingiverse.com/thing:5573
|
||||
* https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
|
||||
* http://www.thingiverse.com/thing:298812
|
||||
*/
|
||||
|
||||
//===========================================================================
|
||||
//============================= DELTA Printer ===============================
|
||||
//===========================================================================
|
||||
// For a Delta printer start with one of the configuration files in the
|
||||
// config/examples/delta directory and customize for your machine.
|
||||
//
|
||||
|
||||
//===========================================================================
|
||||
//============================= SCARA Printer ===============================
|
||||
//===========================================================================
|
||||
// For a SCARA printer start with the configuration files in
|
||||
// config/examples/SCARA and customize for your machine.
|
||||
//
|
||||
|
||||
// @section info
|
||||
|
||||
// User-specified version info of this build to display in [Pronterface, etc] terminal window during
|
||||
// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
|
||||
// build by the user have been successfully uploaded into firmware.
|
||||
#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
|
||||
#define SHOW_BOOTSCREEN
|
||||
#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1
|
||||
#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2
|
||||
|
||||
//
|
||||
// *** VENDORS PLEASE READ *****************************************************
|
||||
//
|
||||
// Marlin now allow you to have a vendor boot image to be displayed on machine
|
||||
// start. When SHOW_CUSTOM_BOOTSCREEN is defined Marlin will first show your
|
||||
// custom boot image and then the default Marlin boot image is shown.
|
||||
//
|
||||
// We suggest for you to take advantage of this new feature and keep the Marlin
|
||||
// boot image unmodified. For an example have a look at the bq Hephestos 2
|
||||
// example configuration folder.
|
||||
//
|
||||
//#define SHOW_CUSTOM_BOOTSCREEN
|
||||
|
||||
// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen.
|
||||
//#define CUSTOM_STATUS_SCREEN_IMAGE
|
||||
|
||||
// @section machine
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
#define SERIAL_PORT 0
|
||||
|
||||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
#define SERIAL_PORT_2 -1
|
||||
|
||||
/**
|
||||
* This setting determines the communication speed of the printer.
|
||||
*
|
||||
* 250000 works in most cases, but you might try a lower speed if
|
||||
* you commonly experience drop-outs during host printing.
|
||||
* You may try up to 1000000 to speed up SD file transfer.
|
||||
*
|
||||
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
|
||||
*/
|
||||
#define BAUDRATE 250000
|
||||
|
||||
// Enable the Bluetooth serial interface on AT90USB devices
|
||||
//#define BLUETOOTH
|
||||
|
||||
// The following define selects which electronics board you have.
|
||||
// Please choose the name from boards.h that matches your setup
|
||||
#ifndef MOTHERBOARD
|
||||
#define MOTHERBOARD BOARD_MKS_GEN_L
|
||||
#endif
|
||||
|
||||
// Optional custom name for your RepStrap or other custom machine
|
||||
// Displayed in the LCD "Ready" message
|
||||
#define CUSTOM_MACHINE_NAME "BIBO2 Touch X"
|
||||
|
||||
// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
|
||||
// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
|
||||
//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
|
||||
|
||||
// @section extruder
|
||||
|
||||
// This defines the number of extruders
|
||||
// :[1, 2, 3, 4, 5]
|
||||
#define EXTRUDERS 2
|
||||
|
||||
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
|
||||
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75
|
||||
|
||||
// For Cyclops or any "multi-extruder" that shares a single nozzle.
|
||||
#define SINGLENOZZLE
|
||||
|
||||
/**
|
||||
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
|
||||
*
|
||||
* This device allows one stepper driver on a control board to drive
|
||||
* two to eight stepper motors, one at a time, in a manner suitable
|
||||
* for extruders.
|
||||
*
|
||||
* This option only allows the multiplexer to switch on tool-change.
|
||||
* Additional options to configure custom E moves are pending.
|
||||
*/
|
||||
//#define MK2_MULTIPLEXER
|
||||
#if ENABLED(MK2_MULTIPLEXER)
|
||||
// Override the default DIO selector pins here, if needed.
|
||||
// Some pins files may provide defaults for these pins.
|
||||
//#define E_MUX0_PIN 40 // Always Required
|
||||
//#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers
|
||||
//#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers
|
||||
#endif
|
||||
|
||||
// A dual extruder that uses a single stepper motor
|
||||
//#define SWITCHING_EXTRUDER
|
||||
#if ENABLED(SWITCHING_EXTRUDER)
|
||||
#define SWITCHING_EXTRUDER_SERVO_NR 0
|
||||
#define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
|
||||
#if EXTRUDERS > 3
|
||||
#define SWITCHING_EXTRUDER_E23_SERVO_NR 1
|
||||
#endif
|
||||
#endif
|
||||
|
||||
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles
|
||||
//#define SWITCHING_NOZZLE
|
||||
#if ENABLED(SWITCHING_NOZZLE)
|
||||
#define SWITCHING_NOZZLE_SERVO_NR 0
|
||||
#define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.0 }
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Two separate X-carriages with extruders that connect to a moving part
|
||||
* via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN.
|
||||
*/
|
||||
//#define PARKING_EXTRUDER
|
||||
#if ENABLED(PARKING_EXTRUDER)
|
||||
#define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage
|
||||
#define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil
|
||||
#define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined.
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder
|
||||
#define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking
|
||||
#define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0.
|
||||
#endif
|
||||
|
||||
/**
|
||||
* "Mixing Extruder"
|
||||
* - Adds a new code, M165, to set the current mix factors.
|
||||
* - Extends the stepping routines to move multiple steppers in proportion to the mix.
|
||||
* - Optional support for Repetier Firmware M163, M164, and virtual extruder.
|
||||
* - This implementation supports only a single extruder.
|
||||
* - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation
|
||||
*/
|
||||
//#define MIXING_EXTRUDER
|
||||
#if ENABLED(MIXING_EXTRUDER)
|
||||
#define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder
|
||||
#define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164
|
||||
//#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands
|
||||
#endif
|
||||
|
||||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
#define HOTEND_OFFSET_X {0.0, -33.00} // (in mm) for each extruder, offset of the hotend on the X axis
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis
|
||||
|
||||
// @section machine
|
||||
|
||||
/**
|
||||
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
|
||||
*
|
||||
* 0 = No Power Switch
|
||||
* 1 = ATX
|
||||
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
|
||||
*
|
||||
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
|
||||
*/
|
||||
#define POWER_SUPPLY 0
|
||||
|
||||
#if POWER_SUPPLY > 0
|
||||
// Enable this option to leave the PSU off at startup.
|
||||
// Power to steppers and heaters will need to be turned on with M80.
|
||||
//#define PS_DEFAULT_OFF
|
||||
|
||||
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
|
||||
#if ENABLED(AUTO_POWER_CONTROL)
|
||||
#define AUTO_POWER_FANS // Turn on PSU if fans need power
|
||||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define POWER_TIMEOUT 30
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
// @section temperature
|
||||
|
||||
//===========================================================================
|
||||
//============================= Thermal Settings ============================
|
||||
//===========================================================================
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -3 : thermocouple with MAX31855 (only for sensor 0)
|
||||
* -2 : thermocouple with MAX6675 (only for sensor 0)
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
* :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
||||
*/
|
||||
#define TEMP_SENSOR_0 5
|
||||
#define TEMP_SENSOR_1 0
|
||||
#define TEMP_SENSOR_2 0
|
||||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 60
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
#define DUMMY_THERMISTOR_999_VALUE 100
|
||||
|
||||
// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
|
||||
// from the two sensors differ too much the print will be aborted.
|
||||
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
||||
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
||||
|
||||
// Extruder temperature must be close to target for this long before M109 returns success
|
||||
#define TEMP_RESIDENCY_TIME 10 // (seconds)
|
||||
#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one
|
||||
#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early.
|
||||
|
||||
// Bed temperature must be close to target for this long before M190 returns success
|
||||
#define TEMP_BED_RESIDENCY_TIME 10 // (seconds)
|
||||
#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one
|
||||
#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early.
|
||||
|
||||
// The minimal temperature defines the temperature below which the heater will not be enabled It is used
|
||||
// to check that the wiring to the thermistor is not broken.
|
||||
// Otherwise this would lead to the heater being powered on all the time.
|
||||
#define HEATER_0_MINTEMP 5
|
||||
#define HEATER_1_MINTEMP 5
|
||||
#define HEATER_2_MINTEMP 5
|
||||
#define HEATER_3_MINTEMP 5
|
||||
#define HEATER_4_MINTEMP 5
|
||||
#define BED_MINTEMP 5
|
||||
|
||||
// When temperature exceeds max temp, your heater will be switched off.
|
||||
// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure!
|
||||
// You should use MINTEMP for thermistor short/failure protection.
|
||||
#define HEATER_0_MAXTEMP 285
|
||||
#define HEATER_1_MAXTEMP 275
|
||||
#define HEATER_2_MAXTEMP 275
|
||||
#define HEATER_3_MAXTEMP 275
|
||||
#define HEATER_4_MAXTEMP 275
|
||||
#define BED_MAXTEMP 115
|
||||
|
||||
//===========================================================================
|
||||
//============================= PID Settings ================================
|
||||
//===========================================================================
|
||||
// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning
|
||||
|
||||
// Comment the following line to disable PID and enable bang-bang.
|
||||
#define PIDTEMP
|
||||
#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current
|
||||
#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current
|
||||
#define PID_K1 0.95 // Smoothing factor within any PID loop
|
||||
#if ENABLED(PIDTEMP)
|
||||
//#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result.
|
||||
//#define PID_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
|
||||
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
|
||||
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
// Set/get with gcode: M301 E[extruder number, 0-2]
|
||||
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
|
||||
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
|
||||
|
||||
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
|
||||
|
||||
// Ultimaker
|
||||
#define DEFAULT_Kp 23.89
|
||||
#define DEFAULT_Ki 1.37
|
||||
#define DEFAULT_Kd 104.5
|
||||
|
||||
// MakerGear
|
||||
//#define DEFAULT_Kp 7.0
|
||||
//#define DEFAULT_Ki 0.1
|
||||
//#define DEFAULT_Kd 12
|
||||
|
||||
// Mendel Parts V9 on 12V
|
||||
//#define DEFAULT_Kp 63.0
|
||||
//#define DEFAULT_Ki 2.25
|
||||
//#define DEFAULT_Kd 440
|
||||
|
||||
#endif // PIDTEMP
|
||||
|
||||
//===========================================================================
|
||||
//============================= PID > Bed Temperature Control ===============
|
||||
//===========================================================================
|
||||
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
|
||||
//
|
||||
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder.
|
||||
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz,
|
||||
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating.
|
||||
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater.
|
||||
// If your configuration is significantly different than this and you don't understand the issues involved, you probably
|
||||
// shouldn't use bed PID until someone else verifies your hardware works.
|
||||
// If this is enabled, find your own PID constants below.
|
||||
//#define PIDTEMPBED
|
||||
|
||||
//#define BED_LIMIT_SWITCHING
|
||||
|
||||
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option.
|
||||
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis)
|
||||
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did,
|
||||
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED)
|
||||
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
|
||||
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
|
||||
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
|
||||
#define DEFAULT_bedKp 23.89
|
||||
#define DEFAULT_bedKi 1.37
|
||||
#define DEFAULT_bedKd 104.5
|
||||
|
||||
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||
//from pidautotune
|
||||
//#define DEFAULT_bedKp 97.1
|
||||
//#define DEFAULT_bedKi 1.41
|
||||
//#define DEFAULT_bedKd 1675.16
|
||||
|
||||
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
|
||||
#endif // PIDTEMPBED
|
||||
|
||||
// @section extruder
|
||||
|
||||
// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP.
|
||||
// It also enables the M302 command to set the minimum extrusion temperature
|
||||
// or to allow moving the extruder regardless of the hotend temperature.
|
||||
// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! ***
|
||||
#define PREVENT_COLD_EXTRUSION
|
||||
#define EXTRUDE_MINTEMP 170
|
||||
|
||||
// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH.
|
||||
// Note that for Bowden Extruders a too-small value here may prevent loading.
|
||||
#define PREVENT_LENGTHY_EXTRUDE
|
||||
#define EXTRUDE_MAXLENGTH 200
|
||||
|
||||
//===========================================================================
|
||||
//======================== Thermal Runaway Protection =======================
|
||||
//===========================================================================
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
* protect against a broken or disconnected thermistor wire.
|
||||
*
|
||||
* The issue: If a thermistor falls out, it will report the much lower
|
||||
* temperature of the air in the room, and the the firmware will keep
|
||||
* the heater on.
|
||||
*
|
||||
* If you get "Thermal Runaway" or "Heating failed" errors the
|
||||
* details can be tuned in Configuration_adv.h
|
||||
*/
|
||||
|
||||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
|
||||
// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics
|
||||
// either in the usual order or reversed
|
||||
//#define COREXY
|
||||
//#define COREXZ
|
||||
//#define COREYZ
|
||||
//#define COREYX
|
||||
//#define COREZX
|
||||
//#define COREZY
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
||||
// @section homing
|
||||
|
||||
// Specify here all the endstop connectors that are connected to any endstop or probe.
|
||||
// Almost all printers will be using one per axis. Probes will use one or more of the
|
||||
// extra connectors. Leave undefined any used for non-endstop and non-probe purposes.
|
||||
//#define USE_XMIN_PLUG
|
||||
//#define USE_YMIN_PLUG
|
||||
#define USE_ZMIN_PLUG
|
||||
#define USE_XMAX_PLUG
|
||||
#define USE_YMAX_PLUG
|
||||
//#define USE_ZMAX_PLUG
|
||||
|
||||
// coarse Endstop Settings
|
||||
#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
|
||||
|
||||
#if DISABLED(ENDSTOPPULLUPS)
|
||||
// fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
|
||||
//#define ENDSTOPPULLUP_XMAX
|
||||
//#define ENDSTOPPULLUP_YMAX
|
||||
//#define ENDSTOPPULLUP_ZMAX
|
||||
//#define ENDSTOPPULLUP_XMIN
|
||||
//#define ENDSTOPPULLUP_YMIN
|
||||
//#define ENDSTOPPULLUP_ZMIN
|
||||
//#define ENDSTOPPULLUP_ZMIN_PROBE
|
||||
#endif
|
||||
|
||||
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||
const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||
const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||
const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||
const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||
const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||
const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||
const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||
|
||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||
//#define ENDSTOP_INTERRUPTS_FEATURE
|
||||
|
||||
//=============================================================================
|
||||
//============================== Movement Settings ============================
|
||||
//=============================================================================
|
||||
// @section motion
|
||||
|
||||
/**
|
||||
* Default Settings
|
||||
*
|
||||
* These settings can be reset by M502
|
||||
*
|
||||
* Note that if EEPROM is enabled, saved values will override these.
|
||||
*/
|
||||
|
||||
/**
|
||||
* With this option each E stepper can have its own factors for the
|
||||
* following movement settings. If fewer factors are given than the
|
||||
* total number of extruders, the last value applies to the rest.
|
||||
*/
|
||||
//#define DISTINCT_E_FACTORS
|
||||
|
||||
/**
|
||||
* Default Axis Steps Per Unit (steps/mm)
|
||||
* Override with M92
|
||||
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
|
||||
*/
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 93.6 }
|
||||
|
||||
/**
|
||||
* Default Max Feed Rate (mm/s)
|
||||
* Override with M203
|
||||
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
|
||||
*/
|
||||
#define DEFAULT_MAX_FEEDRATE { 350, 350, 10, 25 }
|
||||
|
||||
/**
|
||||
* Default Max Acceleration (change/s) change = mm/s
|
||||
* (Maximum start speed for accelerated moves)
|
||||
* Override with M201
|
||||
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
|
||||
*/
|
||||
#define DEFAULT_MAX_ACCELERATION { 1100, 1100, 300, 5000 }
|
||||
|
||||
/**
|
||||
* Default Acceleration (change/s) change = mm/s
|
||||
* Override with M204
|
||||
*
|
||||
* M204 P Acceleration
|
||||
* M204 R Retract Acceleration
|
||||
* M204 T Travel Acceleration
|
||||
*/
|
||||
#define DEFAULT_ACCELERATION 1100 // X, Y, Z and E acceleration for printing moves
|
||||
#define DEFAULT_RETRACT_ACCELERATION 1100 // E acceleration for retracts
|
||||
#define DEFAULT_TRAVEL_ACCELERATION 1100 // X, Y, Z acceleration for travel (non printing) moves
|
||||
|
||||
/**
|
||||
* Default Jerk (mm/s)
|
||||
* Override with M205 X Y Z E
|
||||
*
|
||||
* "Jerk" specifies the minimum speed change that requires acceleration.
|
||||
* When changing speed and direction, if the difference is less than the
|
||||
* value set here, it may happen instantaneously.
|
||||
*/
|
||||
#define DEFAULT_XJERK 7.0
|
||||
#define DEFAULT_YJERK 7.0
|
||||
#define DEFAULT_ZJERK 0.65
|
||||
#define DEFAULT_EJERK 5.0
|
||||
|
||||
//===========================================================================
|
||||
//============================= Z Probe Options =============================
|
||||
//===========================================================================
|
||||
// @section probes
|
||||
|
||||
//
|
||||
// See http://marlinfw.org/docs/configuration/probes.html
|
||||
//
|
||||
|
||||
/**
|
||||
* Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
|
||||
*
|
||||
* Enable this option for a probe connected to the Z Min endstop pin.
|
||||
*/
|
||||
//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
|
||||
|
||||
/**
|
||||
* Z_MIN_PROBE_ENDSTOP
|
||||
*
|
||||
* Enable this option for a probe connected to any pin except Z-Min.
|
||||
* (By default Marlin assumes the Z-Max endstop pin.)
|
||||
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below.
|
||||
*
|
||||
* - The simplest option is to use a free endstop connector.
|
||||
* - Use 5V for powered (usually inductive) sensors.
|
||||
*
|
||||
* - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin:
|
||||
* - For simple switches connect...
|
||||
* - normally-closed switches to GND and D32.
|
||||
* - normally-open switches to 5V and D32.
|
||||
*
|
||||
* WARNING: Setting the wrong pin may have unexpected and potentially
|
||||
* disastrous consequences. Use with caution and do your homework.
|
||||
*
|
||||
*/
|
||||
//#define Z_MIN_PROBE_ENDSTOP
|
||||
|
||||
/**
|
||||
* Probe Type
|
||||
*
|
||||
* Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc.
|
||||
* Activate one of these to use Auto Bed Leveling below.
|
||||
*/
|
||||
|
||||
/**
|
||||
* The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe.
|
||||
* Use G29 repeatedly, adjusting the Z height at each point with movement commands
|
||||
* or (with LCD_BED_LEVELING) the LCD controller.
|
||||
*/
|
||||
//#define PROBE_MANUALLY
|
||||
|
||||
/**
|
||||
* A Fix-Mounted Probe either doesn't deploy or needs manual deployment.
|
||||
* (e.g., an inductive probe or a nozzle-based probe-switch.)
|
||||
*/
|
||||
//#define FIX_MOUNTED_PROBE
|
||||
|
||||
/**
|
||||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_ENDSTOP_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Enable one or more of the following if probing seems unreliable.
|
||||
* Heaters and/or fans can be disabled during probing to minimize electrical
|
||||
* noise. A delay can also be added to allow noise and vibration to settle.
|
||||
* These options are most useful for the BLTouch probe, but may also improve
|
||||
* readings with inductive probes and piezo sensors.
|
||||
*/
|
||||
//#define PROBING_HEATERS_OFF // Turn heaters off when probing
|
||||
//#define PROBING_FANS_OFF // Turn fans off when probing
|
||||
//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
//#define SOLENOID_PROBE
|
||||
|
||||
// A sled-mounted probe like those designed by Charles Bell.
|
||||
//#define Z_PROBE_SLED
|
||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||
|
||||
//
|
||||
// For Z_PROBE_ALLEN_KEY see the Delta example configurations.
|
||||
//
|
||||
|
||||
/**
|
||||
* Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||
* X and Y offsets must be integers.
|
||||
*
|
||||
* In the following example the X and Y offsets are both positive:
|
||||
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10
|
||||
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
|
||||
*
|
||||
* +-- BACK ---+
|
||||
* | |
|
||||
* L | (+) P | R <-- probe (20,20)
|
||||
* E | | I
|
||||
* F | (-) N (+) | G <-- nozzle (10,10)
|
||||
* T | | H
|
||||
* | (-) | T
|
||||
* | |
|
||||
* O-- FRONT --+
|
||||
* (0,0)
|
||||
*/
|
||||
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
|
||||
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]
|
||||
#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle]
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
#define XY_PROBE_SPEED 8000
|
||||
|
||||
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||
|
||||
// Speed for the "accurate" probe of each point
|
||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||
|
||||
// The number of probes to perform at each point.
|
||||
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||
// Set to 3 or more for slow probes, averaging the results.
|
||||
//#define MULTIPLE_PROBING 2
|
||||
|
||||
/**
|
||||
* Z probes require clearance when deploying, stowing, and moving between
|
||||
* probe points to avoid hitting the bed and other hardware.
|
||||
* Servo-mounted probes require extra space for the arm to rotate.
|
||||
* Inductive probes need space to keep from triggering early.
|
||||
*
|
||||
* Use these settings to specify the distance (mm) to raise the probe (or
|
||||
* lower the bed). The values set here apply over and above any (negative)
|
||||
* probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD.
|
||||
* Only integer values >= 1 are valid here.
|
||||
*
|
||||
* Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle.
|
||||
* But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle.
|
||||
*/
|
||||
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
|
||||
#define Z_CLEARANCE_BETWEEN_PROBES 10 // Z Clearance between probe points
|
||||
|
||||
// For M851 give a range for adjusting the Z probe offset
|
||||
#define Z_PROBE_OFFSET_RANGE_MIN -20
|
||||
#define Z_PROBE_OFFSET_RANGE_MAX 20
|
||||
|
||||
// Enable the M48 repeatability test to test probe accuracy
|
||||
//#define Z_MIN_PROBE_REPEATABILITY_TEST
|
||||
|
||||
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
|
||||
// :{ 0:'Low', 1:'High' }
|
||||
#define X_ENABLE_ON 0
|
||||
#define Y_ENABLE_ON 0
|
||||
#define Z_ENABLE_ON 0
|
||||
#define E_ENABLE_ON 0 // For all extruders
|
||||
|
||||
// Disables axis stepper immediately when it's not being used.
|
||||
// WARNING: When motors turn off there is a chance of losing position accuracy!
|
||||
#define DISABLE_X false
|
||||
#define DISABLE_Y false
|
||||
#define DISABLE_Z false
|
||||
// Warn on display about possibly reduced accuracy
|
||||
//#define DISABLE_REDUCED_ACCURACY_WARNING
|
||||
|
||||
// @section extruder
|
||||
|
||||
#define DISABLE_E false // For all extruders
|
||||
#define DISABLE_INACTIVE_EXTRUDER false // Keep only the active extruder enabled.
|
||||
|
||||
// @section machine
|
||||
|
||||
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
|
||||
#define INVERT_X_DIR false
|
||||
#define INVERT_Y_DIR true
|
||||
#define INVERT_Z_DIR false
|
||||
|
||||
// Enable this option for Toshiba stepper drivers
|
||||
//#define CONFIG_STEPPERS_TOSHIBA
|
||||
|
||||
// @section extruder
|
||||
|
||||
// For direct drive extruder v9 set to true, for geared extruder set to false.
|
||||
#define INVERT_E0_DIR false
|
||||
#define INVERT_E1_DIR true
|
||||
#define INVERT_E2_DIR false
|
||||
#define INVERT_E3_DIR false
|
||||
#define INVERT_E4_DIR false
|
||||
|
||||
// @section homing
|
||||
|
||||
//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed
|
||||
|
||||
#define Z_HOMING_HEIGHT 10 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
|
||||
// Be sure you have this distance over your Z_MAX_POS in case.
|
||||
|
||||
// Direction of endstops when homing; 1=MAX, -1=MIN
|
||||
// :[-1,1]
|
||||
#define X_HOME_DIR 1
|
||||
#define Y_HOME_DIR 1
|
||||
#define Z_HOME_DIR -1
|
||||
|
||||
// @section machine
|
||||
|
||||
// The size of the print bed
|
||||
#define X_BED_SIZE 214
|
||||
#define Y_BED_SIZE 186
|
||||
|
||||
// Travel limits (mm) after homing, corresponding to endstop positions.
|
||||
#define X_MIN_POS -107
|
||||
#define Y_MIN_POS -93
|
||||
#define Z_MIN_POS 0
|
||||
#define X_MAX_POS 141
|
||||
#define Y_MAX_POS 93
|
||||
#define Z_MAX_POS 186
|
||||
|
||||
/**
|
||||
* Software Endstops
|
||||
*
|
||||
* - Prevent moves outside the set machine bounds.
|
||||
* - Individual axes can be disabled, if desired.
|
||||
* - X and Y only apply to Cartesian robots.
|
||||
* - Use 'M211' to set software endstops on/off or report current state
|
||||
*/
|
||||
|
||||
// Min software endstops constrain movement within minimum coordinate bounds
|
||||
#define MIN_SOFTWARE_ENDSTOPS
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS)
|
||||
#define MIN_SOFTWARE_ENDSTOP_X
|
||||
#define MIN_SOFTWARE_ENDSTOP_Y
|
||||
#define MIN_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
// Max software endstops constrain movement within maximum coordinate bounds
|
||||
#define MAX_SOFTWARE_ENDSTOPS
|
||||
#if ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#define MAX_SOFTWARE_ENDSTOP_X
|
||||
#define MAX_SOFTWARE_ENDSTOP_Y
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Filament Runout Sensor
|
||||
* A mechanical or opto endstop is used to check for the presence of filament.
|
||||
*
|
||||
* RAMPS-based boards use SERVO3_PIN.
|
||||
* For other boards you may need to define FIL_RUNOUT_PIN.
|
||||
* By default the firmware assumes HIGH = has filament, LOW = ran out
|
||||
*/
|
||||
//#define FILAMENT_RUNOUT_SENSOR
|
||||
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|
||||
#define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
|
||||
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
|
||||
#define FILAMENT_RUNOUT_SCRIPT "M600"
|
||||
#endif
|
||||
|
||||
//===========================================================================
|
||||
//=============================== Bed Leveling ==============================
|
||||
//===========================================================================
|
||||
// @section calibrate
|
||||
|
||||
/**
|
||||
* Choose one of the options below to enable G29 Bed Leveling. The parameters
|
||||
* and behavior of G29 will change depending on your selection.
|
||||
*
|
||||
* If using a Probe for Z Homing, enable Z_SAFE_HOMING also!
|
||||
*
|
||||
* - AUTO_BED_LEVELING_3POINT
|
||||
* Probe 3 arbitrary points on the bed (that aren't collinear)
|
||||
* You specify the XY coordinates of all 3 points.
|
||||
* The result is a single tilted plane. Best for a flat bed.
|
||||
*
|
||||
* - AUTO_BED_LEVELING_LINEAR
|
||||
* Probe several points in a grid.
|
||||
* You specify the rectangle and the density of sample points.
|
||||
* The result is a single tilted plane. Best for a flat bed.
|
||||
*
|
||||
* - AUTO_BED_LEVELING_BILINEAR
|
||||
* Probe several points in a grid.
|
||||
* You specify the rectangle and the density of sample points.
|
||||
* The result is a mesh, best for large or uneven beds.
|
||||
*
|
||||
* - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
|
||||
* A comprehensive bed leveling system combining the features and benefits
|
||||
* of other systems. UBL also includes integrated Mesh Generation, Mesh
|
||||
* Validation and Mesh Editing systems.
|
||||
*
|
||||
* - MESH_BED_LEVELING
|
||||
* Probe a grid manually
|
||||
* The result is a mesh, suitable for large or uneven beds. (See BILINEAR.)
|
||||
* For machines without a probe, Mesh Bed Leveling provides a method to perform
|
||||
* leveling in steps so you can manually adjust the Z height at each grid-point.
|
||||
* With an LCD controller the process is guided step-by-step.
|
||||
*/
|
||||
//#define AUTO_BED_LEVELING_3POINT
|
||||
//#define AUTO_BED_LEVELING_LINEAR
|
||||
//#define AUTO_BED_LEVELING_BILINEAR
|
||||
//#define AUTO_BED_LEVELING_UBL
|
||||
//#define MESH_BED_LEVELING
|
||||
|
||||
/**
|
||||
* Enable detailed logging of G28, G29, M48, etc.
|
||||
* Turn on with the command 'M111 S32'.
|
||||
* NOTE: Requires a lot of PROGMEM!
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
#define ENABLE_LEVELING_FADE_HEIGHT
|
||||
|
||||
// For Cartesian machines, instead of dividing moves on mesh boundaries,
|
||||
// split up moves into short segments like a Delta. This follows the
|
||||
// contours of the bed more closely than edge-to-edge straight moves.
|
||||
#define SEGMENT_LEVELED_MOVES
|
||||
#define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
|
||||
|
||||
/**
|
||||
* Enable the G26 Mesh Validation Pattern tool.
|
||||
*/
|
||||
#define G26_MESH_VALIDATION
|
||||
#if ENABLED(G26_MESH_VALIDATION)
|
||||
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
|
||||
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
|
||||
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
|
||||
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||
|
||||
// The Z probe minimum outer margin (to validate G29 parameters).
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// Set the boundaries for probing (where the probe can reach).
|
||||
#define LEFT_PROBE_BED_POSITION 15
|
||||
#define RIGHT_PROBE_BED_POSITION 170
|
||||
#define FRONT_PROBE_BED_POSITION 20
|
||||
#define BACK_PROBE_BED_POSITION 170
|
||||
|
||||
// Probe along the Y axis, advancing X after each column
|
||||
//#define PROBE_Y_FIRST
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Beyond the probed grid, continue the implied tilt?
|
||||
// Default is to maintain the height of the nearest edge.
|
||||
//#define EXTRAPOLATE_BEYOND_GRID
|
||||
|
||||
//
|
||||
// Experimental Subdivision of the grid by Catmull-Rom method.
|
||||
// Synthesizes intermediate points to produce a more detailed mesh.
|
||||
//
|
||||
//#define ABL_BILINEAR_SUBDIVISION
|
||||
#if ENABLED(ABL_BILINEAR_SUBDIVISION)
|
||||
// Number of subdivisions between probe points
|
||||
#define BILINEAR_SUBDIVISIONS 3
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
#elif ENABLED(AUTO_BED_LEVELING_3POINT)
|
||||
|
||||
// 3 arbitrary points to probe.
|
||||
// A simple cross-product is used to estimate the plane of the bed.
|
||||
#define ABL_PROBE_PT_1_X 15
|
||||
#define ABL_PROBE_PT_1_Y 180
|
||||
#define ABL_PROBE_PT_2_X 15
|
||||
#define ABL_PROBE_PT_2_Y 20
|
||||
#define ABL_PROBE_PT_3_X 170
|
||||
#define ABL_PROBE_PT_3_Y 20
|
||||
|
||||
#elif ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
|
||||
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||
|
||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||
|
||||
#define UBL_PROBE_PT_1_X 39 // Probing points for 3-Point leveling of the mesh
|
||||
#define UBL_PROBE_PT_1_Y 180
|
||||
#define UBL_PROBE_PT_2_X 39
|
||||
#define UBL_PROBE_PT_2_Y 20
|
||||
#define UBL_PROBE_PT_3_X 180
|
||||
#define UBL_PROBE_PT_3_Y 20
|
||||
|
||||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
|
||||
#define MESH_INSET 10 // Mesh inset margin on print area
|
||||
#define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited.
|
||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
|
||||
|
||||
#endif // BED_LEVELING
|
||||
|
||||
/**
|
||||
* Use the LCD controller for bed leveling
|
||||
* Requires MESH_BED_LEVELING or PROBE_MANUALLY
|
||||
*/
|
||||
//#define LCD_BED_LEVELING
|
||||
|
||||
#if ENABLED(LCD_BED_LEVELING)
|
||||
#define MBL_Z_STEP 0.025 // Step size while manually probing Z axis.
|
||||
#define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
|
||||
#endif
|
||||
|
||||
// Add a menu item to move between bed corners for manual bed adjustment
|
||||
#define LEVEL_BED_CORNERS
|
||||
|
||||
/**
|
||||
* Commands to execute at the end of G29 probing.
|
||||
* Useful to retract or move the Z probe out of the way.
|
||||
*/
|
||||
//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10"
|
||||
|
||||
|
||||
// @section homing
|
||||
|
||||
// The center of the bed is at (X=0, Y=0)
|
||||
//#define BED_CENTER_AT_0_0
|
||||
|
||||
// Manually set the home position. Leave these undefined for automatic settings.
|
||||
// For DELTA this is the top-center of the Cartesian print volume.
|
||||
//#define MANUAL_X_HOME_POS 0
|
||||
//#define MANUAL_Y_HOME_POS 0
|
||||
//#define MANUAL_Z_HOME_POS 0
|
||||
|
||||
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
|
||||
//
|
||||
// With this feature enabled:
|
||||
//
|
||||
// - Allow Z homing only after X and Y homing AND stepper drivers still enabled.
|
||||
// - If stepper drivers time out, it will need X and Y homing again before Z homing.
|
||||
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
|
||||
// - Prevent Z homing when the Z probe is outside bed area.
|
||||
//
|
||||
//#define Z_SAFE_HOMING
|
||||
|
||||
#if ENABLED(Z_SAFE_HOMING)
|
||||
#define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28).
|
||||
#define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28).
|
||||
#endif
|
||||
|
||||
// Homing speeds (mm/m)
|
||||
#define HOMING_FEEDRATE_XY (15*60)
|
||||
#define HOMING_FEEDRATE_Z (4*60)
|
||||
|
||||
// @section calibrate
|
||||
|
||||
/**
|
||||
* Bed Skew Compensation
|
||||
*
|
||||
* This feature corrects for misalignment in the XYZ axes.
|
||||
*
|
||||
* Take the following steps to get the bed skew in the XY plane:
|
||||
* 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185)
|
||||
* 2. For XY_DIAG_AC measure the diagonal A to C
|
||||
* 3. For XY_DIAG_BD measure the diagonal B to D
|
||||
* 4. For XY_SIDE_AD measure the edge A to D
|
||||
*
|
||||
* Marlin automatically computes skew factors from these measurements.
|
||||
* Skew factors may also be computed and set manually:
|
||||
*
|
||||
* - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2
|
||||
* - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD)))
|
||||
*
|
||||
* If desired, follow the same procedure for XZ and YZ.
|
||||
* Use these diagrams for reference:
|
||||
*
|
||||
* Y Z Z
|
||||
* ^ B-------C ^ B-------C ^ B-------C
|
||||
* | / / | / / | / /
|
||||
* | / / | / / | / /
|
||||
* | A-------D | A-------D | A-------D
|
||||
* +-------------->X +-------------->X +-------------->Y
|
||||
* XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR
|
||||
*/
|
||||
//#define SKEW_CORRECTION
|
||||
|
||||
#if ENABLED(SKEW_CORRECTION)
|
||||
// Input all length measurements here:
|
||||
#define XY_DIAG_AC 282.8427124746
|
||||
#define XY_DIAG_BD 282.8427124746
|
||||
#define XY_SIDE_AD 200
|
||||
|
||||
// Or, set the default skew factors directly here
|
||||
// to override the above measurements:
|
||||
#define XY_SKEW_FACTOR 0.0
|
||||
|
||||
//#define SKEW_CORRECTION_FOR_Z
|
||||
#if ENABLED(SKEW_CORRECTION_FOR_Z)
|
||||
#define XZ_DIAG_AC 282.8427124746
|
||||
#define XZ_DIAG_BD 282.8427124746
|
||||
#define YZ_DIAG_AC 282.8427124746
|
||||
#define YZ_DIAG_BD 282.8427124746
|
||||
#define YZ_SIDE_AD 200
|
||||
#define XZ_SKEW_FACTOR 0.0
|
||||
#define YZ_SKEW_FACTOR 0.0
|
||||
#endif
|
||||
|
||||
// Enable this option for M852 to set skew at runtime
|
||||
//#define SKEW_CORRECTION_GCODE
|
||||
#endif
|
||||
|
||||
//=============================================================================
|
||||
//============================= Additional Features ===========================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
|
||||
//
|
||||
// EEPROM
|
||||
//
|
||||
// The microcontroller can store settings in the EEPROM, e.g. max velocity...
|
||||
// M500 - stores parameters in EEPROM
|
||||
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
|
||||
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
|
||||
//
|
||||
#define EEPROM_SETTINGS // Enable for M500 and M501 commands
|
||||
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
|
||||
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
|
||||
|
||||
//
|
||||
// Host Keepalive
|
||||
//
|
||||
// When enabled Marlin will send a busy status message to the host
|
||||
// every couple of seconds when it can't accept commands.
|
||||
//
|
||||
#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages
|
||||
#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
|
||||
#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
|
||||
|
||||
//
|
||||
// M100 Free Memory Watcher
|
||||
//
|
||||
//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage
|
||||
|
||||
//
|
||||
// G20/G21 Inch mode support
|
||||
//
|
||||
//#define INCH_MODE_SUPPORT
|
||||
|
||||
//
|
||||
// M149 Set temperature units support
|
||||
//
|
||||
//#define TEMPERATURE_UNITS_SUPPORT
|
||||
|
||||
// @section temperature
|
||||
|
||||
// Preheat Constants
|
||||
#define PREHEAT_1_TEMP_HOTEND 180
|
||||
#define PREHEAT_1_TEMP_BED 60
|
||||
#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
#define PREHEAT_2_TEMP_HOTEND 240
|
||||
#define PREHEAT_2_TEMP_BED 80
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
/**
|
||||
* Nozzle Park
|
||||
*
|
||||
* Park the nozzle at the given XYZ position on idle or G27.
|
||||
*
|
||||
* The "P" parameter controls the action applied to the Z axis:
|
||||
*
|
||||
* P0 (Default) If Z is below park Z raise the nozzle.
|
||||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
// Specify a park position as { X, Y, Z }
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
#define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis)
|
||||
#define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers)
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Clean Nozzle Feature -- EXPERIMENTAL
|
||||
*
|
||||
* Adds the G12 command to perform a nozzle cleaning process.
|
||||
*
|
||||
* Parameters:
|
||||
* P Pattern
|
||||
* S Strokes / Repetitions
|
||||
* T Triangles (P1 only)
|
||||
*
|
||||
* Patterns:
|
||||
* P0 Straight line (default). This process requires a sponge type material
|
||||
* at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
|
||||
* between the start / end points.
|
||||
*
|
||||
* P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
|
||||
* number of zig-zag triangles to do. "S" defines the number of strokes.
|
||||
* Zig-zags are done in whichever is the narrower dimension.
|
||||
* For example, "G12 P1 S1 T3" will execute:
|
||||
*
|
||||
* --
|
||||
* | (X0, Y1) | /\ /\ /\ | (X1, Y1)
|
||||
* | | / \ / \ / \ |
|
||||
* A | | / \ / \ / \ |
|
||||
* | | / \ / \ / \ |
|
||||
* | (X0, Y0) | / \/ \/ \ | (X1, Y0)
|
||||
* -- +--------------------------------+
|
||||
* |________|_________|_________|
|
||||
* T1 T2 T3
|
||||
*
|
||||
* P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
|
||||
* "R" specifies the radius. "S" specifies the stroke count.
|
||||
* Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
|
||||
*
|
||||
* Caveats: The ending Z should be the same as starting Z.
|
||||
* Attention: EXPERIMENTAL. G-code arguments may change.
|
||||
*
|
||||
*/
|
||||
//#define NOZZLE_CLEAN_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_CLEAN_FEATURE)
|
||||
// Default number of pattern repetitions
|
||||
#define NOZZLE_CLEAN_STROKES 12
|
||||
|
||||
// Default number of triangles
|
||||
#define NOZZLE_CLEAN_TRIANGLES 3
|
||||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
// Circular pattern circle fragments number
|
||||
#define NOZZLE_CLEAN_CIRCLE_FN 10
|
||||
// Middle point of circle
|
||||
#define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT
|
||||
|
||||
// Moves the nozzle to the initial position
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
* Automatically start and stop the print job timer on M104/M109/M190.
|
||||
*
|
||||
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
|
||||
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
|
||||
* M190 (bed, wait) - high temp = start timer, low temp = none
|
||||
*
|
||||
* The timer can also be controlled with the following commands:
|
||||
*
|
||||
* M75 - Start the print job timer
|
||||
* M76 - Pause the print job timer
|
||||
* M77 - Stop the print job timer
|
||||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
* Track statistical data such as:
|
||||
*
|
||||
* - Total print jobs
|
||||
* - Total successful print jobs
|
||||
* - Total failed print jobs
|
||||
* - Total time printing
|
||||
*
|
||||
* View the current statistics with M78.
|
||||
*/
|
||||
//#define PRINTCOUNTER
|
||||
|
||||
//=============================================================================
|
||||
//============================= LCD and SD support ============================
|
||||
//=============================================================================
|
||||
|
||||
// @section lcd
|
||||
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
*
|
||||
* Select the language to display on the LCD. These languages are available:
|
||||
*
|
||||
* en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, eu, fi, fr, fr_utf8, gl,
|
||||
* hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8,
|
||||
* tr, uk, zh_CN, zh_TW, test
|
||||
*
|
||||
* :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' }
|
||||
*/
|
||||
#define LCD_LANGUAGE en
|
||||
|
||||
/**
|
||||
* LCD Character Set
|
||||
*
|
||||
* Note: This option is NOT applicable to Graphical Displays.
|
||||
*
|
||||
* All character-based LCDs provide ASCII plus one of these
|
||||
* language extensions:
|
||||
*
|
||||
* - JAPANESE ... the most common
|
||||
* - WESTERN ... with more accented characters
|
||||
* - CYRILLIC ... for the Russian language
|
||||
*
|
||||
* To determine the language extension installed on your controller:
|
||||
*
|
||||
* - Compile and upload with LCD_LANGUAGE set to 'test'
|
||||
* - Click the controller to view the LCD menu
|
||||
* - The LCD will display Japanese, Western, or Cyrillic text
|
||||
*
|
||||
* See http://marlinfw.org/docs/development/lcd_language.html
|
||||
*
|
||||
* :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
*/
|
||||
#define DISPLAY_CHARSET_HD44780 JAPANESE
|
||||
|
||||
/**
|
||||
* LCD TYPE
|
||||
*
|
||||
* Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD.
|
||||
* Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display.
|
||||
* (These options will be enabled automatically for most displays.)
|
||||
*
|
||||
* IMPORTANT: The U8glib library is required for Full Graphic Display!
|
||||
* https://github.com/olikraus/U8glib_Arduino
|
||||
*/
|
||||
//#define ULTRA_LCD // Character based
|
||||
//#define DOGLCD // Full graphics display
|
||||
|
||||
/**
|
||||
* SD CARD
|
||||
*
|
||||
* SD Card support is disabled by default. If your controller has an SD slot,
|
||||
* you must uncomment the following option or it won't work.
|
||||
*
|
||||
*/
|
||||
#define SDSUPPORT
|
||||
|
||||
/**
|
||||
* SD CARD: SPI SPEED
|
||||
*
|
||||
* Enable one of the following items for a slower SPI transfer speed.
|
||||
* This may be required to resolve "volume init" errors.
|
||||
*/
|
||||
//#define SPI_SPEED SPI_HALF_SPEED
|
||||
//#define SPI_SPEED SPI_QUARTER_SPEED
|
||||
//#define SPI_SPEED SPI_EIGHTH_SPEED
|
||||
|
||||
/**
|
||||
* SD CARD: ENABLE CRC
|
||||
*
|
||||
* Use CRC checks and retries on the SD communication.
|
||||
*/
|
||||
//#define SD_CHECK_AND_RETRY
|
||||
|
||||
//
|
||||
// ENCODER SETTINGS
|
||||
//
|
||||
// This option overrides the default number of encoder pulses needed to
|
||||
// produce one step. Should be increased for high-resolution encoders.
|
||||
//
|
||||
//#define ENCODER_PULSES_PER_STEP 1
|
||||
|
||||
//
|
||||
// Use this option to override the number of step signals required to
|
||||
// move between next/prev menu items.
|
||||
//
|
||||
//#define ENCODER_STEPS_PER_MENU_ITEM 5
|
||||
|
||||
/**
|
||||
* Encoder Direction Options
|
||||
*
|
||||
* Test your encoder's behavior first with both options disabled.
|
||||
*
|
||||
* Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION.
|
||||
* Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION.
|
||||
* Reversed Value Editing only? Enable BOTH options.
|
||||
*/
|
||||
|
||||
//
|
||||
// This option reverses the encoder direction everywhere.
|
||||
//
|
||||
// Set this option if CLOCKWISE causes values to DECREASE
|
||||
//
|
||||
#define REVERSE_ENCODER_DIRECTION
|
||||
|
||||
//
|
||||
// This option reverses the encoder direction for navigating LCD menus.
|
||||
//
|
||||
// If CLOCKWISE normally moves DOWN this makes it go UP.
|
||||
// If CLOCKWISE normally moves UP this makes it go DOWN.
|
||||
//
|
||||
//#define REVERSE_MENU_DIRECTION
|
||||
|
||||
//
|
||||
// Individual Axis Homing
|
||||
//
|
||||
// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu.
|
||||
//
|
||||
#define INDIVIDUAL_AXIS_HOMING_MENU
|
||||
|
||||
//
|
||||
// SPEAKER/BUZZER
|
||||
//
|
||||
// If you have a speaker that can produce tones, enable it here.
|
||||
// By default Marlin assumes you have a buzzer with a fixed frequency.
|
||||
//
|
||||
//#define SPEAKER
|
||||
|
||||
//
|
||||
// The duration and frequency for the UI feedback sound.
|
||||
// Set these to 0 to disable audio feedback in the LCD menus.
|
||||
//
|
||||
// Note: Test audio output with the G-Code:
|
||||
// M300 S<frequency Hz> P<duration ms>
|
||||
//
|
||||
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
|
||||
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: Standard
|
||||
//
|
||||
// Marlin supports a wide variety of controllers.
|
||||
// Enable one of the following options to specify your controller.
|
||||
//
|
||||
|
||||
//
|
||||
// Original RADDS LCD Display+Encoder+SDCardReader
|
||||
// http://doku.radds.org/dokumentation/lcd-display/
|
||||
//
|
||||
//#define RADDS_DISPLAY
|
||||
|
||||
//
|
||||
// ULTIMAKER Controller.
|
||||
//
|
||||
//#define ULTIMAKERCONTROLLER
|
||||
|
||||
//
|
||||
// ULTIPANEL as seen on Thingiverse.
|
||||
//
|
||||
//#define ULTIPANEL
|
||||
|
||||
//
|
||||
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
|
||||
// http://reprap.org/wiki/PanelOne
|
||||
//
|
||||
//#define PANEL_ONE
|
||||
|
||||
//
|
||||
// MaKr3d Makr-Panel with graphic controller and SD support.
|
||||
// http://reprap.org/wiki/MaKr3d_MaKrPanel
|
||||
//
|
||||
//#define MAKRPANEL
|
||||
|
||||
//
|
||||
// ReprapWorld Graphical LCD
|
||||
// https://reprapworld.com/?products_details&products_id/1218
|
||||
//
|
||||
//#define REPRAPWORLD_GRAPHICAL_LCD
|
||||
|
||||
//
|
||||
// Activate one of these if you have a Panucatt Devices
|
||||
// Viki 2.0 or mini Viki with Graphic LCD
|
||||
// http://panucatt.com
|
||||
//
|
||||
//#define VIKI2
|
||||
//#define miniVIKI
|
||||
|
||||
//
|
||||
// Adafruit ST7565 Full Graphic Controller.
|
||||
// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
|
||||
//
|
||||
//#define ELB_FULL_GRAPHIC_CONTROLLER
|
||||
|
||||
//
|
||||
// RepRapDiscount Smart Controller.
|
||||
// http://reprap.org/wiki/RepRapDiscount_Smart_Controller
|
||||
//
|
||||
// Note: Usually sold with a white PCB.
|
||||
//
|
||||
//#define REPRAP_DISCOUNT_SMART_CONTROLLER
|
||||
|
||||
//
|
||||
// GADGETS3D G3D LCD/SD Controller
|
||||
// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel
|
||||
//
|
||||
// Note: Usually sold with a blue PCB.
|
||||
//
|
||||
//#define G3D_PANEL
|
||||
|
||||
//
|
||||
// RepRapDiscount FULL GRAPHIC Smart Controller
|
||||
// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
|
||||
//
|
||||
#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
|
||||
|
||||
//
|
||||
// MakerLab Mini Panel with graphic
|
||||
// controller and SD support - http://reprap.org/wiki/Mini_panel
|
||||
//
|
||||
//#define MINIPANEL
|
||||
|
||||
//
|
||||
// RepRapWorld REPRAPWORLD_KEYPAD v1.1
|
||||
// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626
|
||||
//
|
||||
// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key
|
||||
// is pressed, a value of 10.0 means 10mm per click.
|
||||
//
|
||||
//#define REPRAPWORLD_KEYPAD
|
||||
//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0
|
||||
|
||||
//
|
||||
// RigidBot Panel V1.0
|
||||
// http://www.inventapart.com/
|
||||
//
|
||||
//#define RIGIDBOT_PANEL
|
||||
|
||||
//
|
||||
// BQ LCD Smart Controller shipped by
|
||||
// default with the BQ Hephestos 2 and Witbox 2.
|
||||
//
|
||||
//#define BQ_LCD_SMART_CONTROLLER
|
||||
|
||||
//
|
||||
// Cartesio UI
|
||||
// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
|
||||
//
|
||||
//#define CARTESIO_UI
|
||||
|
||||
//
|
||||
// ANET and Tronxy Controller supported displays.
|
||||
//
|
||||
//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin.
|
||||
// This LCD is known to be susceptible to electrical interference
|
||||
// which scrambles the display. Pressing any button clears it up.
|
||||
// This is a LCD2004 display with 5 analog buttons.
|
||||
|
||||
//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6
|
||||
// A clone of the RepRapDiscount full graphics display but with
|
||||
// different pins/wiring (see pins_ANET_10.h).
|
||||
|
||||
//
|
||||
// LCD for Melzi Card with Graphical LCD
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
|
||||
// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C
|
||||
//
|
||||
|
||||
//
|
||||
// Elefu RA Board Control Panel
|
||||
// http://www.elefu.com/index.php?route=product/product&product_id=53
|
||||
//
|
||||
//#define RA_CONTROL_PANEL
|
||||
|
||||
//
|
||||
// Sainsmart YW Robot (LCM1602) LCD Display
|
||||
//
|
||||
// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library
|
||||
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home
|
||||
//
|
||||
//#define LCD_I2C_SAINSMART_YWROBOT
|
||||
|
||||
//
|
||||
// Generic LCM1602 LCD adapter
|
||||
//
|
||||
//#define LCM1602
|
||||
|
||||
//
|
||||
// PANELOLU2 LCD with status LEDs,
|
||||
// separate encoder and click inputs.
|
||||
//
|
||||
// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later.
|
||||
// For more info: https://github.com/lincomatic/LiquidTWI2
|
||||
//
|
||||
// Note: The PANELOLU2 encoder click input can either be directly connected to
|
||||
// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1).
|
||||
//
|
||||
//#define LCD_I2C_PANELOLU2
|
||||
|
||||
//
|
||||
// Panucatt VIKI LCD with status LEDs,
|
||||
// integrated click & L/R/U/D buttons, separate encoder inputs.
|
||||
//
|
||||
//#define LCD_I2C_VIKI
|
||||
|
||||
//
|
||||
// SSD1306 OLED full graphics generic display
|
||||
//
|
||||
//#define U8GLIB_SSD1306
|
||||
|
||||
//
|
||||
// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
|
||||
//
|
||||
//#define SAV_3DGLCD
|
||||
#if ENABLED(SAV_3DGLCD)
|
||||
//#define U8GLIB_SSD1306
|
||||
#define U8GLIB_SH1106
|
||||
#endif
|
||||
|
||||
//
|
||||
// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder
|
||||
// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1)
|
||||
//
|
||||
//#define ULTI_CONTROLLER
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: Shift register panels
|
||||
//
|
||||
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
|
||||
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
|
||||
//
|
||||
//#define SAV_3DLCD
|
||||
|
||||
//
|
||||
// TinyBoy2 128x64 OLED / Encoder Panel
|
||||
//
|
||||
//#define OLED_PANEL_TINYBOY2
|
||||
|
||||
//
|
||||
// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
|
||||
// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
|
||||
//
|
||||
//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
|
||||
|
||||
//
|
||||
// MKS MINI12864 with graphic controller and SD support
|
||||
// http://reprap.org/wiki/MKS_MINI_12864
|
||||
//
|
||||
//#define MKS_MINI_12864
|
||||
|
||||
//
|
||||
// Factory display for Creality CR-10
|
||||
// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
|
||||
//
|
||||
// This is RAMPS-compatible using a single 10-pin connector.
|
||||
// (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
|
||||
//
|
||||
//#define CR10_STOCKDISPLAY
|
||||
|
||||
//
|
||||
// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
|
||||
// http://reprap.org/wiki/MKS_12864OLED
|
||||
//
|
||||
// Tiny, but very sharp OLED display
|
||||
//
|
||||
//#define MKS_12864OLED // Uses the SH1106 controller (default)
|
||||
//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller
|
||||
|
||||
//
|
||||
// AZSMZ 12864 LCD with SD
|
||||
// https://www.aliexpress.com/store/product/3D-printer-smart-controller-SMART-RAMPS-OR-RAMPS-1-4-LCD-12864-LCD-control-panel-green/2179173_32213636460.html
|
||||
//
|
||||
//#define AZSMZ_12864
|
||||
|
||||
// Silvergate GLCD controller
|
||||
// http://github.com/android444/Silvergate
|
||||
//
|
||||
//#define SILVER_GATE_GLCD_CONTROLLER
|
||||
|
||||
//=============================================================================
|
||||
//=============================== Extra Features ==============================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
|
||||
// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino
|
||||
//#define FAST_PWM_FAN
|
||||
|
||||
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
|
||||
// which is not as annoying as with the hardware PWM. On the other hand, if this frequency
|
||||
// is too low, you should also increment SOFT_PWM_SCALE.
|
||||
//#define FAN_SOFT_PWM
|
||||
|
||||
// Incrementing this by 1 will double the software PWM frequency,
|
||||
// affecting heaters, and the fan if FAN_SOFT_PWM is enabled.
|
||||
// However, control resolution will be halved for each increment;
|
||||
// at zero value, there are 128 effective control positions.
|
||||
#define SOFT_PWM_SCALE 0
|
||||
|
||||
// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can
|
||||
// be used to mitigate the associated resolution loss. If enabled,
|
||||
// some of the PWM cycles are stretched so on average the desired
|
||||
// duty cycle is attained.
|
||||
//#define SOFT_PWM_DITHER
|
||||
|
||||
// Temperature status LEDs that display the hotend and bed temperature.
|
||||
// If all hotends, bed temperature, and target temperature are under 54C
|
||||
// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
|
||||
//#define TEMP_STAT_LEDS
|
||||
|
||||
// M240 Triggers a camera by emulating a Canon RC-1 Remote
|
||||
// Data from: http://www.doc-diy.net/photo/rc-1_hacked/
|
||||
//#define PHOTOGRAPH_PIN 23
|
||||
|
||||
// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
|
||||
//#define SF_ARC_FIX
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// Support for BlinkM/CyzRgb
|
||||
//#define BLINKM
|
||||
|
||||
// Support for PCA9632 PWM LED driver
|
||||
//#define PCA9632
|
||||
|
||||
/**
|
||||
* RGB LED / LED Strip Control
|
||||
*
|
||||
* Enable support for an RGB LED connected to 5V digital pins, or
|
||||
* an RGB Strip connected to MOSFETs controlled by digital pins.
|
||||
*
|
||||
* Adds the M150 command to set the LED (or LED strip) color.
|
||||
* If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
|
||||
* luminance values can be set from 0 to 255.
|
||||
* For Neopixel LED an overall brightness parameter is also available.
|
||||
*
|
||||
* *** CAUTION ***
|
||||
* LED Strips require a MOFSET Chip between PWM lines and LEDs,
|
||||
* as the Arduino cannot handle the current the LEDs will require.
|
||||
* Failure to follow this precaution can destroy your Arduino!
|
||||
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
|
||||
* more current than the Arduino 5V linear regulator can produce.
|
||||
* *** CAUTION ***
|
||||
*
|
||||
* LED Type. Enable only one of the following two options.
|
||||
*
|
||||
*/
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
#define RGB_LED_W_PIN -1
|
||||
#endif
|
||||
|
||||
// Support for Adafruit Neopixel LED driver
|
||||
//#define NEOPIXEL_LED
|
||||
#if ENABLED(NEOPIXEL_LED)
|
||||
#define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
|
||||
#define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
|
||||
#define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip
|
||||
#define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
|
||||
#define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255)
|
||||
//#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Printer Event LEDs
|
||||
*
|
||||
* During printing, the LEDs will reflect the printer status:
|
||||
*
|
||||
* - Gradually change from blue to violet as the heated bed gets to target temp
|
||||
* - Gradually change from violet to red as the hotend gets to temperature
|
||||
* - Change to white to illuminate work surface
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
/**
|
||||
* R/C SERVO support
|
||||
* Sponsored by TrinityLabs, Reworked by codexmas
|
||||
*/
|
||||
|
||||
/**
|
||||
* Number of servos
|
||||
*
|
||||
* For some servo-related options NUM_SERVOS will be set automatically.
|
||||
* Set this manually if there are extra servos needing manual control.
|
||||
* Leave undefined or set to 0 to entirely disable the servo subsystem.
|
||||
*/
|
||||
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command
|
||||
|
||||
// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle.
|
||||
// 300ms is a good value but you can try less delay.
|
||||
// If the servo can't reach the requested position, increase it.
|
||||
#define SERVO_DELAY { 300 }
|
||||
|
||||
// Servo deactivation
|
||||
//
|
||||
// With this option servos are powered only during movement, then turned off to prevent jitter.
|
||||
//#define DEACTIVATE_SERVOS_AFTER_MOVE
|
||||
|
||||
#endif // CONFIGURATION_H
|
||||
|
|
@ -59,14 +59,14 @@
|
|||
//============================= DELTA Printer ===============================
|
||||
//===========================================================================
|
||||
// For a Delta printer start with one of the configuration files in the
|
||||
// example_configurations/delta directory and customize for your machine.
|
||||
// config/examples/delta directory and customize for your machine.
|
||||
//
|
||||
|
||||
//===========================================================================
|
||||
//============================= SCARA Printer ===============================
|
||||
//===========================================================================
|
||||
// For a SCARA printer start with the configuration files in
|
||||
// example_configurations/SCARA and customize for your machine.
|
||||
// config/examples/SCARA and customize for your machine.
|
||||
//
|
||||
|
||||
// @section info
|
||||
|
|
@ -100,12 +100,21 @@
|
|||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port 0 is always used by the Arduino bootloader regardless of this setting.
|
||||
* Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader.
|
||||
*
|
||||
* :[0, 1, 2, 3, 4, 5, 6, 7]
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
#define SERIAL_PORT 0
|
||||
|
||||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
#define SERIAL_PORT_2 -1
|
||||
|
||||
/**
|
||||
* This setting determines the communication speed of the printer.
|
||||
*
|
||||
|
|
@ -568,9 +577,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
|
|||
* M204 R Retract Acceleration
|
||||
* M204 T Travel Acceleration
|
||||
*/
|
||||
#define DEFAULT_ACCELERATION 1100 // X, Y, Z and E acceleration in mm/s^2 for printing moves
|
||||
#define DEFAULT_RETRACT_ACCELERATION 1100 // E acceleration in mm/s^2 for retracts
|
||||
#define DEFAULT_TRAVEL_ACCELERATION 1100 // X, Y, Z acceleration in mm/s^2 for travel (non printing) moves
|
||||
#define DEFAULT_ACCELERATION 1100 // X, Y, Z and E acceleration for printing moves
|
||||
#define DEFAULT_RETRACT_ACCELERATION 1100 // E acceleration for retracts
|
||||
#define DEFAULT_TRAVEL_ACCELERATION 1100 // X, Y, Z acceleration for travel (non printing) moves
|
||||
|
||||
/**
|
||||
* Default Jerk (mm/s)
|
||||
|
|
@ -1433,6 +1442,12 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
|
|||
// Enable one of the following options to specify your controller.
|
||||
//
|
||||
|
||||
//
|
||||
// Original RADDS LCD Display+Encoder+SDCardReader
|
||||
// http://doku.radds.org/dokumentation/lcd-display/
|
||||
//
|
||||
//#define RADDS_DISPLAY
|
||||
|
||||
//
|
||||
// ULTIMAKER Controller.
|
||||
//
|
||||
|
|
@ -1661,6 +1676,12 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
|
|||
//#define MKS_12864OLED // Uses the SH1106 controller (default)
|
||||
//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller
|
||||
|
||||
//
|
||||
// AZSMZ 12864 LCD with SD
|
||||
// https://www.aliexpress.com/store/product/3D-printer-smart-controller-SMART-RAMPS-OR-RAMPS-1-4-LCD-12864-LCD-control-panel-green/2179173_32213636460.html
|
||||
//
|
||||
//#define AZSMZ_12864
|
||||
|
||||
// Silvergate GLCD controller
|
||||
// http://github.com/android444/Silvergate
|
||||
//
|
||||
Reference in a new issue