diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index f0d891363..4731a04ed 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -9,11 +9,11 @@ //Implementation of an idea by Prof Braino to inform user that any changes made //to THIS file by the user have been successfully uploaded into firmware. #define STRING_VERSION_CONFIG_H "2012-02-08j" //Personal revision number for changes to THIS file. -#define STRING_CONFIG_H_AUTHOR "username" //Who made the changes. +#define STRING_CONFIG_H_AUTHOR "scuba82" //Who made the changes. // This determines the communication speed of the printer -#define BAUDRATE 250000 -//#define BAUDRATE 115200 +//#define BAUDRATE 250000 +#define BAUDRATE 115200 //// The following define selects which electronics board you have. Please choose the one that matches your setup // MEGA/RAMPS up to 1.2 = 3, @@ -21,9 +21,12 @@ // Gen6 = 5, // Sanguinololu 1.2 and above = 62 // Ultimaker = 7, +// Gen7 custom (Alfons3 Version) = 77, "https://github.com/Alfons3/Generation_7_Electronics" +// Gen7 v1.1, v1.2 = 78 +// Gen7 v1.3 = 79 // Teensylu = 8, // Gen3+ =9 -#define MOTHERBOARD 7 +#define MOTHERBOARD 77 //=========================================================================== //=============================Thermal Settings ============================ @@ -41,14 +44,14 @@ // 6 is EPCOS 100k // 7 is 100k Honeywell thermistor 135-104LAG-J01 -#define TEMP_SENSOR_0 -1 +#define TEMP_SENSOR_0 6 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 // Actual temperature must be close to target for this long before M109 returns success #define TEMP_RESIDENCY_TIME 30 // (seconds) -#define TEMP_HYSTERESIS 3 // (C°) range of +/- temperatures considered "close" to the target one +#define TEMP_HYSTERESIS 3 // (C�) range of +/- temperatures considered "close" to the target one // The minimal temperature defines the temperature below which the heater will not be enabled It is used // to check that the wiring to the thermistor is not broken. @@ -108,9 +111,9 @@ #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors // The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins. -const bool X_ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops. -const bool Y_ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops. -const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops. +const bool X_ENDSTOPS_INVERTING = false; // set to true to invert the logic of the endstops. +const bool Y_ENDSTOPS_INVERTING = false; // set to true to invert the logic of the endstops. +const bool Z_ENDSTOPS_INVERTING = false; // set to true to invert the logic of the endstops. // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 #define X_ENABLE_ON 0 @@ -124,9 +127,9 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th #define DISABLE_Z false #define DISABLE_E false // For all extruders -#define INVERT_X_DIR true // for Mendel set to false, for Orca set to true +#define INVERT_X_DIR false // for Mendel set to false, for Orca set to true #define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false -#define INVERT_Z_DIR true // for Mendel set to false, for Orca set to true +#define INVERT_Z_DIR false // for Mendel set to false, for Orca set to true #define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false @@ -137,7 +140,7 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th #define Y_HOME_DIR -1 #define Z_HOME_DIR -1 -#define min_software_endstops true //If true, axis won't move to coordinates less than zero. +#define min_software_endstops false //If true, axis won't move to coordinates less than zero. #define max_software_endstops true //If true, axis won't move to coordinates greater than the defined lengths below. #define X_MAX_LENGTH 205 #define Y_MAX_LENGTH 205 @@ -149,7 +152,7 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th // default settings -#define DEFAULT_AXIS_STEPS_PER_UNIT {78.7402,78.7402,200*8/3,760*1.1} // default steps per unit for ultimaker +#define DEFAULT_AXIS_STEPS_PER_UNIT {80,80,2560,760*1.1} // default steps per unit for ultimaker #define DEFAULT_MAX_FEEDRATE {500, 500, 5, 45} // (mm/sec) #define DEFAULT_MAX_ACCELERATION {9000,9000,100,10000} // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for skeinforge 40+, for older versions raise them a lot. @@ -170,18 +173,18 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. //define this to enable eeprom support -//#define EEPROM_SETTINGS +#define EEPROM_SETTINGS //to disable EEPROM Serial responses and decrease program space by ~1700 byte: comment this out: // please keep turned on if you can. -//#define EEPROM_CHITCHAT +#define EEPROM_CHITCHAT //LCD and SD support //#define ULTRA_LCD //general lcd support, also 16x2 #define SDSUPPORT // Enable SD Card Support in Hardware Console -//#define ULTIPANEL +#define ULTIPANEL #ifdef ULTIPANEL - //#define NEWPANEL //enable this if you have a click-encoder panel + #define NEWPANEL //enable this if you have a click-encoder panel #define SDSUPPORT #define ULTRA_LCD #define LCD_WIDTH 20 diff --git a/Marlin/Gen7/boards.txt b/Marlin/Gen7/boards.txt new file mode 100644 index 000000000..d6fbaeeb9 --- /dev/null +++ b/Marlin/Gen7/boards.txt @@ -0,0 +1,101 @@ +############################################################## + +Gen7-644-16.name=Gen7 with ATmega644 and 16 MHz +Gen7-644-16.upload.protocol=stk500v2 +Gen7-644-16.upload.maximum_size=63488 +Gen7-644-16.upload.speed=115200 +Gen7-644-16.bootloader.low_fuses=0xF7 +Gen7-644-16.bootloader.high_fuses=0xD4 +Gen7-644-16.bootloader.extended_fuses=0xFD +Gen7-644-16.bootloader.path=Gen7 +Gen7-644-16.bootloader.file=bootloader-644-16MHz.hex +Gen7-644-16.bootloader.unlock_bits=0x3F +Gen7-644-16.bootloader.lock_bits=0x0F +Gen7-644-16.build.mcu=atmega644 +Gen7-644-16.build.f_cpu=16000000L +Gen7-644-16.build.core=arduino + +############################################################## + +Gen7-644-20.name=Gen7 with ATmega644 and 20 MHz +Gen7-644-20.upload.protocol=stk500v2 +Gen7-644-20.upload.maximum_size=63488 +Gen7-644-20.upload.speed=115200 +Gen7-644-20.bootloader.low_fuses=0xF7 +Gen7-644-20.bootloader.high_fuses=0xD4 +Gen7-644-20.bootloader.extended_fuses=0xFD +Gen7-644-20.bootloader.path=Gen7 +Gen7-644-20.bootloader.file=bootloader-644-20MHz.hex +Gen7-644-20.bootloader.unlock_bits=0x3F +Gen7-644-20.bootloader.lock_bits=0x0F +Gen7-644-20.build.mcu=atmega644 +Gen7-644-20.build.f_cpu=20000000L +Gen7-644-20.build.core=arduino + +############################################################## + +Gen7-644P-16.name=Gen7 with ATmega644P and 16 MHz +Gen7-644P-16.upload.protocol=stk500v2 +Gen7-644P-16.upload.maximum_size=63488 +Gen7-644P-16.upload.speed=115200 +Gen7-644P-16.bootloader.low_fuses=0xF7 +Gen7-644P-16.bootloader.high_fuses=0xD4 +Gen7-644P-16.bootloader.extended_fuses=0xFD +Gen7-644P-16.bootloader.path=Gen7 +Gen7-644P-16.bootloader.file=bootloader-644P-16MHz.hex +Gen7-644P-16.bootloader.unlock_bits=0x3F +Gen7-644P-16.bootloader.lock_bits=0x0F +Gen7-644P-16.build.mcu=atmega644p +Gen7-644P-16.build.f_cpu=16000000L +Gen7-644P-16.build.core=arduino + +############################################################## + +Gen7-644P-20.name=Gen7 with ATmega644P and 20 MHz +Gen7-644P-20.upload.protocol=stk500v2 +Gen7-644P-20.upload.maximum_size=63488 +Gen7-644P-20.upload.speed=115200 +Gen7-644P-20.bootloader.low_fuses=0xF7 +Gen7-644P-20.bootloader.high_fuses=0xD4 +Gen7-644P-20.bootloader.extended_fuses=0xFD +Gen7-644P-20.bootloader.path=Gen7 +Gen7-644P-20.bootloader.file=bootloader-644P-20MHz.hex +Gen7-644P-20.bootloader.unlock_bits=0x3F +Gen7-644P-20.bootloader.lock_bits=0x0F +Gen7-644P-20.build.mcu=atmega644p +Gen7-644P-20.build.f_cpu=20000000L +Gen7-644P-20.build.core=arduino + +############################################################## + +Gen7-1284p-16.name=Gen7 with ATmega1284 and 16 MHz +Gen7-1284p-16.upload.protocol=stk500v2 +Gen7-1284p-16.upload.maximum_size=129024 +Gen7-1284p-16.upload.speed=115200 +Gen7-1284p-16.bootloader.low_fuses=0xF7 +Gen7-1284p-16.bootloader.high_fuses=0xD4 +Gen7-1284p-16.bootloader.extended_fuses=0xFD +Gen7-1284p-16.bootloader.path=Gen7 +Gen7-1284p-16.bootloader.file=bootloader-1284P-16MHz.hex +Gen7-1284p-16.bootloader.unlock_bits=0x3F +Gen7-1284p-16.bootloader.lock_bits=0x2F +Gen7-1284p-16.build.mcu=atmega1284p +Gen7-1284p-16.build.f_cpu=16000000L +Gen7-1284p-16.build.core=arduino + +############################################################## + +Gen7-1284p-20.name=Gen7 with ATmega1284 and 20 MHz +Gen7-1284p-20.upload.protocol=stk500v2 +Gen7-1284p-20.upload.maximum_size=129024 +Gen7-1284p-20.upload.speed=115200 +Gen7-1284p-20.bootloader.low_fuses=0xF7 +Gen7-1284p-20.bootloader.high_fuses=0xD4 +Gen7-1284p-20.bootloader.extended_fuses=0xFD +Gen7-1284p-20.bootloader.path=Gen7 +Gen7-1284p-20.bootloader.file=bootloader-1284P-16MHz.hex +Gen7-1284p-20.bootloader.unlock_bits=0x3F +Gen7-1284p-20.bootloader.lock_bits=0x2F +Gen7-1284p-20.build.mcu=atmega1284p +Gen7-1284p-20.build.f_cpu=20000000L +Gen7-1284p-20.build.core=arduino diff --git a/Marlin/Gen7/bootloaders/Gen7/bootloader-1284P-16MHz.hex b/Marlin/Gen7/bootloaders/Gen7/bootloader-1284P-16MHz.hex new file mode 100644 index 000000000..93df372ca --- /dev/null +++ b/Marlin/Gen7/bootloaders/Gen7/bootloader-1284P-16MHz.hex @@ -0,0 +1,113 @@ +:020000021000EC +:10F8000011241FBE8FEF90E49EBF8DBF01C32F92C6 +:10F810003F924F925F926F927F928F929F92AF92A0 +:10F82000BF92CF92DF92EF92FF920F931F93DF93DD +:10F83000CF93CDB7DEB7C252D1400FB6F894DEBF3A +:10F840000FBECDBF44245524DD24C25EDE4F188296 +:10F85000CE51D1408824992454013AC20E9428FFF5 +:10F86000282F133059F1143028F4113081F0123060 +:10F8700000F507C0153081F1153030F1163071F701 +:10F880003DC08B3159F711E05BE1D52EE7CF8130D8 +:10F8900041F0C25EDE4F3881CE51D140831709F06E +:10F8A00019C2D226C25EDE4F2883CE51D14012E06B +:10F8B000D5CFF82EEE24D82613E0D0CF90E0E82A5A +:10F8C000F92AD22614E0CACF8E3009F003C2D82616 +:10F8D00015E044245524C2CFE1E0F0E0EC0FFD1F19 +:10F8E000E40DF51D80830894411C511CD8264E144C +:10F8F0005F0409F0B3CF720116E0B0CF8D1509F0A7 +:10F90000E9C1EAC1CC2447C08D81803311F090E079 +:10F910000AC08F81882311F49EE105C0813011F067 +:10F9200095E001C097E91A821B828D818C838E81BC +:10F930008D839E831F8247E0E42EF12C88C11A82BA +:10F9400068E06B8383E58C8394E59D83EBE4EE8331 +:10F9500085E38F8380E3888789878FE58A8782E3C1 +:10F960008B873BE0E32EF12C72C18A81813941F013 +:10F97000823941F0803911F48FE005C080E003C086 +:10F9800082E001C08AE01A828B8323E0E22EF12C10 +:10F990005EC1CC24C3941A8292E0E92EF12C58C1A6 +:10F9A0008D81882311F48EE128C0813011F085E02B +:10F9B00024C087E922C01A8229E0E1E0F0E0209328 +:10F9C000570084911BC08B81803589F48C818830ED +:10F9D00039F439E0E2E0F0E03093570084910DC053 +:10F9E00069E0E0E0F0E060935700849106C099E0A0 +:10F9F000E3E0F0E09093570084911A828B831C829D +:10FA000084E0E82EF12C23C18A8190E0A0E0B0E0F0 +:10FA1000B82EAA24992488248B8190E0A0E0B0E03D +:10FA2000DC0199278827882A992AAA2ABB2A8D814E +:10FA300090E0A0E0B0E0882A992AAA2ABB2A8C810B +:10FA400090E0A0E0B0E0BA2FA92F982F8827882A4D +:10FA5000992AAA2ABB2A88C0EA81C05EDE4FE883C1 +:10FA6000C052D140C15EDE4F1882CF51D1408B8150 +:10FA7000A82FB0E0C15EDE4F28813981CF51D1403F +:10FA8000A22BB32B933109F042C075016401CC0C59 +:10FA9000DD1CEE1CFF1C33E0F601E0925B003093AE +:10FAA0005700E89507B600FCFDCF8E01055F1F4F9C +:10FAB000F801808161810E5F1F4FA5019401220F23 +:10FAC000331F441F551F362E222490E0822993298C +:10FAD00061E00C01F90140935B0060935700E895E9 +:10FAE00011240894811C911CA11CB11C129701F7D0 +:10FAF00085E0F601E0925B0080935700E89507B639 +:10FB000000FCFDCF81E180935700E8952DC0FE01F8 +:10FB10003B9620E030E040E050E011977D0100E0AE +:10FB200010E00894E11CF11C011D111D6081F99980 +:10FB3000FECF1FBAC901880D991D92BD81BD60BD60 +:10FB40000FB6F894FA9AF99A0FBE2F5F3F4F4F4FB6 +:10FB50005F4F2E153F054007510711F03196E6CF54 +:10FB6000820E931EA41EB51E1A826EC09A81CE5DAF +:10FB7000DE4F9883C252D140CF5DDE4F1882C15212 +:10FB8000D1408B81C82EDD24CF5DDE4FE881F98125 +:10FB9000C152D140CE2ADF2A1A8289818431E1F410 +:10FBA0009601BE016D5F7F4FD501C401880F991F7B +:10FBB000AA1FBB1FABBFFC0187919691FB018083FD +:10FBC00091836E5F7F4F0894811C911CA11CB11C16 +:10FBD0002250304049F72EC0BE016D5F7F4F20E0BC +:10FBE00030E040E050E00894C108D108760100E020 +:10FBF00010E00894C11CD11C0894E11CF11C011DEB +:10FC0000111DF999FECFC901880D991D92BD81BDC5 +:10FC1000F89A80B5FB018193BF012F5F3F4F4F4F93 +:10FC20005F4F2E153F054007510759F7820E931E6F +:10FC3000A41EB51E23E0E22EF12CEC0CFD1CFB01F2 +:10FC4000108205C080EC8A8392E0E92EF12CCC244E +:10FC50008BE10E94C7FEC25EDE4F8881CE51D1404B +:10FC60000E94C7FE8F2D0E94C7FE8E2D0E94C7FEE8 +:10FC70008EE00E94C7FE85E1D82EC25EDE4FF8817D +:10FC8000CE51D140DF26DE24DF243E010894611CE2 +:10FC9000711C0AC0F30111913F01812F0E94C7FE20 +:10FCA000D1260894E108F108E114F10499F78D2DAB +:10FCB0000E94C7FECC2009F044C0C25EDE4FF8812E +:10FCC000CE51D140FF5FC25EDE4FF883CE51D140AE +:10FCD000EE24FF2410E0C2CD9981933109F4BCCE0B +:10FCE0009431B0F4933009F440CE943038F491302C +:10FCF00009F425CE923009F0A5CF04CE903109F455 +:10FD000001CE913109F445CE963009F09BCF7CCEDF +:10FD1000983109F458CE993150F4953109F49CCEBC +:10FD2000953108F423CF963109F08CCF1FCF9B314A +:10FD300009F436CE9D3109F4E7CD9A3109F082CF2E +:10FD40003ACECE5DDE4F0FB6F894DEBF0FBECDBF0C +:10FD5000CF91DF911F910F91FF90EF90DF90CF90A7 +:10FD6000BF90AF909F908F907F906F905F904F90DB +:10FD70003F902F9008958091C00087FFFCCF089599 +:10FD80008091C00087FFFCCF8091C6000895982F16 +:10FD90008091C00085FFFCCF9093C60008959B0121 +:10FDA000AC0197FF11C08091C00082608093C000B9 +:10FDB00050954095309521953F4F4F4F5F4F60E0F4 +:10FDC00074E284EF90E009C08091C0008D7F809341 +:10FDD000C00060E072E18AE790E00E9447FF2C5F7C +:10FDE0003F4F4F4F5F4F83E0569547953795279587 +:10FDF0008A95D1F7215030403093C5002093C4003C +:10FE0000089518B817B81F921F921F920895FFCF38 +:10FE100084B714BE90E083709070892B39F418B8C1 +:10FE200017B81F921F921F920895FFCF88E1809309 +:10FE3000C10060E07EE38EEF9FEF0E94CFFE0E9444 +:10FE400007FC18B817B81F921F921F920895FFCF92 +:10FE500020E030E040E050E013C02F5F3F4F4F4FB5 +:10FE60005F4F21308AE6380788E1480780E058076D +:10FE700039F418B817B81F921F921F920895FFCF38 +:10FE80008091C00087FFE9CF0E94C0FE0895A1E2E3 +:10FE90001A2EAA1BBB1BFD010DC0AA1FBB1FEE1F04 +:10FEA000FF1FA217B307E407F50720F0A21BB30B4F +:10FEB000E40BF50B661F771F881F991F1A9469F7CB +:10FEC00060957095809590959B01AC01BD01CF0127 +:02FED000089593 +:040000031000F800F1 +:00000001FF diff --git a/Marlin/Gen7/bootloaders/Gen7/bootloader-644-16MHz.hex b/Marlin/Gen7/bootloaders/Gen7/bootloader-644-16MHz.hex new file mode 100644 index 000000000..58098693d --- /dev/null +++ b/Marlin/Gen7/bootloaders/Gen7/bootloader-644-16MHz.hex @@ -0,0 +1,75 @@ +:10F800008FEF90E19EBF8DBF11241FBE5A9A00C09A +:10F81000CDB7DEB7CD51D140DEBFCDBF1092C50010 +:10F8200088E08093C40088E18093C100EE24FF2427 +:10F8300020E0552400E010E039E0432E9BE0292E23 +:10F84000312C2C0E3D1ECFC14150504060407040C5 +:10F8500011F43FE206C08091C00087FFF5CF3091E0 +:10F86000C600933021F1943028F4913099F0923011 +:10F87000C8F407C0953049F1953000F19630D1F5C4 +:10F8800035C03B3119F491E02BE134C03F3291F5A2 +:10F890003983BBC1313011F0351559F52327532E6B +:10F8A00092E028C0B32FA0E0232793E023C0832F4A +:10F8B00090E0A82BB92B232794E01CC03E30C9F45C +:10F8C000232795E0EE24FF2415C0E1E0F0E0EC0FE3 +:10F8D000FD1FEE0DFF1D30830894E11CF11C232752 +:10F8E000EA16FB0639F4D70196E004C0321709F492 +:10F8F0008CC190E044E755E962E470E0ACCF90E061 +:10F9000044C08D81803311F090E00AC08F8188233C +:10F9100011F49EE105C0813011F099E001C096E933 +:10F920001A821B828D818C838E818D839E831F82A0 +:10F9300047E050E0F4C01A8288E08B8381E48C8336 +:10F9400086E58D8382E58E8389E48F8383E58887CE +:10F9500080E589878FE58A8782E38B874BE050E0DB +:10F96000DEC08A81813941F0823941F0803911F459 +:10F970008FE005C080E003C082E001C08AE01A8207 +:10F980008B8343E050E0CBC091E01A8242E050E02C +:10F99000C7C08D81882311F48EE124C0813011F01D +:10F9A00089E020C086E91EC01A82E1E0F0E04092C2 +:10F9B0005700849118C08B81803579F48C81883010 +:10F9C00031F4E2E0F0E04092570084910BC0E0E0B7 +:10F9D000F0E040925700849105C0E3E0F0E04092EF +:10F9E000570084911A828B831C8244E050E097C0B8 +:10F9F000BC80AA248D81082F10E00A291B29000F42 +:10FA0000111F1A828AC09A8088248B81682F70E027 +:10FA100068297929933109F033C0F7EF0F3F1F07A9 +:10FA200010F0A8013FC023E0F80120935700E895AB +:10FA300007B600FCFDCFA801D1018C9111962C9145 +:10FA400011971296D22ECC2490E08C299D2921E08A +:10FA5000FA010C0120935700E89511244E5F5F4F87 +:10FA60006250704051F725E0F80120935700E89567 +:10FA700007B600FCFDCF81E180935700E89512C0E6 +:10FA8000A801FB01D10141BD52BD4F5F5F4F8D9178 +:10FA900080BDFA9AF99AF999FECF3197A1F7A8019A +:10FAA000460F571F1A828A0138C07A8066248B81DC +:10FAB000A82FB0E0A629B7291A828981843191F450 +:10FAC000BD019E012D5F3F4FF80185919491F90191 +:10FAD000808391832E5F3F4F0E5F1F4F62507040B7 +:10FAE00099F713C0A801BD019E012D5F3F4F41BD95 +:10FAF00052BD4F5F5F4FF89A80B5F90181939F0126 +:10FB000061507040A1F70A0F1B1FAD014D5F5F4FA1 +:10FB1000F901108204C080EC8A8342E050E090E05A +:10FB2000FBE1F093C6008091C00086FFFCCF80917E +:10FB3000C00080648093C0005092C6008091C000D5 +:10FB400086FFFCCF8091C00080648093C000652F49 +:10FB50005093C6008091C00086FFFCCF8091C0000A +:10FB600080648093C000342F4093C6008091C00011 +:10FB700086FFFCCF8091C00080648093C0008EE03F +:10FB80008093C6008091C00086FFFCCF8091C000AA +:10FB900080648093C00025E1252523272627FE01C8 +:10FBA000319610C030813093C6008091C00086FF2E +:10FBB000FCCF31968091C00080648093C0002327E1 +:10FBC000415050404115510569F72093C60080917E +:10FBD000C00086FFFCCF8091C00080648093C0008D +:10FBE000992349F4539444E755E962E470E090E0C6 +:10FBF000A0E0B0E030CE5A9881E180935700E895BC +:10FC000011241F921F920895FFCF9981933109F417 +:10FC1000FACE9431C8F4963009F4EACE973050F415 +:10FC2000923009F46CCE933009F49BCE913009F0F8 +:10FC300072CF81CE913109F4A7CE923108F0E1CE96 +:10FC4000903109F068CF5BCE983109F4B4CE993188 +:10FC500050F4953109F4D7CE953108F426CF96317A +:10FC600009F059CF22CF9B3109F493CE9C3120F477 +:10FC70009A3109F050CF98CE9D3109F442CE9F328F +:06FC800009F049CFB8CFE6 +:040000030000F80001 +:00000001FF diff --git a/Marlin/Gen7/bootloaders/Gen7/bootloader-644-20MHz.hex b/Marlin/Gen7/bootloaders/Gen7/bootloader-644-20MHz.hex new file mode 100644 index 000000000..d216c65f9 --- /dev/null +++ b/Marlin/Gen7/bootloaders/Gen7/bootloader-644-20MHz.hex @@ -0,0 +1,75 @@ +:10F800008FEF90E19EBF8DBF11241FBE5A9A00C09A +:10F81000CDB7DEB7CD51D140DEBFCDBF1092C50010 +:10F820008AE08093C40088E18093C100EE24FF2425 +:10F8300020E0552400E010E039E0432E9BE0292E23 +:10F84000312C2C0E3D1ECFC14150504060407040C5 +:10F8500011F43FE206C08091C00087FFF5CF3091E0 +:10F86000C600933021F1943028F4913099F0923011 +:10F87000C8F407C0953049F1953000F19630D1F5C4 +:10F8800035C03B3119F491E02BE134C03F3291F5A2 +:10F890003983BBC1313011F0351559F52327532E6B +:10F8A00092E028C0B32FA0E0232793E023C0832F4A +:10F8B00090E0A82BB92B232794E01CC03E30C9F45C +:10F8C000232795E0EE24FF2415C0E1E0F0E0EC0FE3 +:10F8D000FD1FEE0DFF1D30830894E11CF11C232752 +:10F8E000EA16FB0639F4D70196E004C0321709F492 +:10F8F0008CC190E041ED5AE363E570E0ACCF90E05D +:10F9000044C08D81803311F090E00AC08F8188233C +:10F9100011F49EE105C0813011F099E001C096E933 +:10F920001A821B828D818C838E818D839E831F82A0 +:10F9300047E050E0F4C01A8288E08B8381E48C8336 +:10F9400086E58D8382E58E8389E48F8383E58887CE +:10F9500080E589878FE58A8782E38B874BE050E0DB +:10F96000DEC08A81813941F0823941F0803911F459 +:10F970008FE005C080E003C082E001C08AE01A8207 +:10F980008B8343E050E0CBC091E01A8242E050E02C +:10F99000C7C08D81882311F48EE124C0813011F01D +:10F9A00089E020C086E91EC01A82E1E0F0E04092C2 +:10F9B0005700849118C08B81803579F48C81883010 +:10F9C00031F4E2E0F0E04092570084910BC0E0E0B7 +:10F9D000F0E040925700849105C0E3E0F0E04092EF +:10F9E000570084911A828B831C8244E050E097C0B8 +:10F9F000BC80AA248D81082F10E00A291B29000F42 +:10FA0000111F1A828AC09A8088248B81682F70E027 +:10FA100068297929933109F033C0F7EF0F3F1F07A9 +:10FA200010F0A8013FC023E0F80120935700E895AB +:10FA300007B600FCFDCFA801D1018C9111962C9145 +:10FA400011971296D22ECC2490E08C299D2921E08A +:10FA5000FA010C0120935700E89511244E5F5F4F87 +:10FA60006250704051F725E0F80120935700E89567 +:10FA700007B600FCFDCF81E180935700E89512C0E6 +:10FA8000A801FB01D10141BD52BD4F5F5F4F8D9178 +:10FA900080BDFA9AF99AF999FECF3197A1F7A8019A +:10FAA000460F571F1A828A0138C07A8066248B81DC +:10FAB000A82FB0E0A629B7291A828981843191F450 +:10FAC000BD019E012D5F3F4FF80185919491F90191 +:10FAD000808391832E5F3F4F0E5F1F4F62507040B7 +:10FAE00099F713C0A801BD019E012D5F3F4F41BD95 +:10FAF00052BD4F5F5F4FF89A80B5F90181939F0126 +:10FB000061507040A1F70A0F1B1FAD014D5F5F4FA1 +:10FB1000F901108204C080EC8A8342E050E090E05A +:10FB2000FBE1F093C6008091C00086FFFCCF80917E +:10FB3000C00080648093C0005092C6008091C000D5 +:10FB400086FFFCCF8091C00080648093C000652F49 +:10FB50005093C6008091C00086FFFCCF8091C0000A +:10FB600080648093C000342F4093C6008091C00011 +:10FB700086FFFCCF8091C00080648093C0008EE03F +:10FB80008093C6008091C00086FFFCCF8091C000AA +:10FB900080648093C00025E1252523272627FE01C8 +:10FBA000319610C030813093C6008091C00086FF2E +:10FBB000FCCF31968091C00080648093C0002327E1 +:10FBC000415050404115510569F72093C60080917E +:10FBD000C00086FFFCCF8091C00080648093C0008D +:10FBE000992349F4539441ED5AE363E570E090E0C2 +:10FBF000A0E0B0E030CE5A9881E180935700E895BC +:10FC000011241F921F920895FFCF9981933109F417 +:10FC1000FACE9431C8F4963009F4EACE973050F415 +:10FC2000923009F46CCE933009F49BCE913009F0F8 +:10FC300072CF81CE913109F4A7CE923108F0E1CE96 +:10FC4000903109F068CF5BCE983109F4B4CE993188 +:10FC500050F4953109F4D7CE953108F426CF96317A +:10FC600009F059CF22CF9B3109F493CE9C3120F477 +:10FC70009A3109F050CF98CE9D3109F442CE9F328F +:06FC800009F049CFB8CFE6 +:040000030000F80001 +:00000001FF diff --git a/Marlin/Gen7/bootloaders/Gen7/bootloader-644P-16MHz.hex b/Marlin/Gen7/bootloaders/Gen7/bootloader-644P-16MHz.hex new file mode 100644 index 000000000..a9105a221 --- /dev/null +++ b/Marlin/Gen7/bootloaders/Gen7/bootloader-644P-16MHz.hex @@ -0,0 +1,75 @@ +:10F800008FEF90E19EBF8DBF11241FBE5A9A00C09A +:10F81000CDB7DEB7CD51D140DEBFCDBF1092C50010 +:10F8200088E08093C40088E18093C100EE24FF2427 +:10F8300020E0552400E010E039E0432E93E0292E2B +:10F84000312C2C0E3D1ECDC14150504060407040C7 +:10F8500011F43FE206C08091C00087FFF5CF3091E0 +:10F86000C600933021F1943028F4913099F0923011 +:10F87000C8F407C0953049F1953000F19630D1F5C4 +:10F8800035C03B3119F491E02BE134C03F3291F5A2 +:10F890003983B9C1313011F0351559F52327532E6D +:10F8A00092E028C0B32FA0E0232793E023C0832F4A +:10F8B00090E0A82BB92B232794E01CC03E30C9F45C +:10F8C000232795E0EE24FF2415C0E1E0F0E0EC0FE3 +:10F8D000FD1FEE0DFF1D30830894E11CF11C232752 +:10F8E000EA16FB0639F4D70196E004C0321709F492 +:10F8F0008AC190E044E755E962E470E0ACCF90E063 +:10F9000044C08D81803311F090E00AC08F8188233C +:10F9100011F49EE105C0813011F09AE001C096E932 +:10F920001A821B828D818C838E818D839E831F82A0 +:10F9300047E050E0F2C01A8288E08B8381E48C8338 +:10F9400086E58D8382E58E8389E48F8383E58887CE +:10F9500080E589878FE58A8782E38B874BE050E0DB +:10F96000DCC08A81813941F0823941F0803911F45B +:10F970008FE005C080E003C082E001C08AE01A8207 +:10F980008B8343E050E0C9C091E01A8242E050E02E +:10F99000C5C08D81882311F48EE124C0813011F01F +:10F9A0008AE020C086E91EC01A82E1E0F0E04092C1 +:10F9B0005700849118C08B81803579F48C81883010 +:10F9C00031F4E2E0F0E04092570084910BC0E0E0B7 +:10F9D000F0E040925700849105C0E3E0F0E04092EF +:10F9E000570084911A828B831C8244E050E095C0BA +:10F9F000BC80AA248D81082F10E00A291B29000F42 +:10FA0000111F1A8288C09A8088248B81682F70E029 +:10FA100068297929933109F034C0F7EF0F3F1F07A8 +:10FA200010F0A80141C023E0F80120935700E895A9 +:10FA300007B600FCFDCFA801DE011B968C91119644 +:10FA40002C9111971296D22ECC2490E08C299D29CE +:10FA500021E0FA010C0120935700E89511244E5F34 +:10FA60005F4F6250704051F725E0F8012093570036 +:10FA7000E89507B600FCFDCF81E180935700E8953B +:10FA800013C0A801FB01DE011B9641BD52BD4F5FB3 +:10FA90005F4F8D9180BDFA9AF99AF999FECF31970F +:10FAA000A1F7A801460F571F1A828A0134C07A8035 +:10FAB00066248B81A82FB0E0A629B7291A828981F4 +:10FAC000843181F4BD019101F80185919491F9018E +:10FAD000808391832E5F3F4F0E5F1F4F62507040B7 +:10FAE00099F711C0A801BD01910141BD52BD4F5F01 +:10FAF0005F4FF89A80B5F90181939F016150704082 +:10FB0000A1F70A0F1B1FAD014D5F5F4FF901108276 +:10FB100004C080EC8A8342E050E090E0FBE1F09387 +:10FB2000C6008091C00086FFFCCF8091C000806439 +:10FB30008093C0005092C6008091C00086FFFCCF29 +:10FB40008091C00080648093C000652F5093C600F0 +:10FB50008091C00086FFFCCF8091C00080648093BC +:10FB6000C000342F4093C6008091C00086FFFCCFB8 +:10FB70008091C00080648093C0008EE08093C600B6 +:10FB80008091C00086FFFCCF8091C000806480938C +:10FB9000C00025E1252523272627FE01319610C028 +:10FBA00030813093C6008091C00086FFFCCF319633 +:10FBB0008091C00080648093C00023274150504052 +:10FBC0004115510569F72093C6008091C00086FF5A +:10FBD000FCCF8091C00080648093C000992349F4D9 +:10FBE000539444E755E962E470E090E0A0E0B0E0AF +:10FBF00032CE5A9881E180935700E89511241F92E4 +:10FC00001F920895FFCF9981933109F4FCCE94316E +:10FC1000C8F4963009F4ECCE973050F4923009F4E1 +:10FC20006ECE933009F49DCE913009F072CF83CE21 +:10FC3000913109F4A9CE923108F0E3CE903109F068 +:10FC400068CF5DCE983109F4B6CE993150F4953134 +:10FC500009F4D9CE953108F42ACF963109F059CF5D +:10FC600026CF9B3109F495CE9C3120F49A3109F0CE +:10FC700050CF9ACE9D3109F444CE9F3209F049CF3E +:02FC8000B8CFFB +:040000030000F80001 +:00000001FF diff --git a/Marlin/Gen7/bootloaders/Gen7/bootloader-644P-20MHz.hex b/Marlin/Gen7/bootloaders/Gen7/bootloader-644P-20MHz.hex new file mode 100644 index 000000000..4ee0c6b1f --- /dev/null +++ b/Marlin/Gen7/bootloaders/Gen7/bootloader-644P-20MHz.hex @@ -0,0 +1,75 @@ +:10F800008FEF90E19EBF8DBF11241FBE5A9A00C09A +:10F81000CDB7DEB7CD51D140DEBFCDBF1092C50010 +:10F820008AE08093C40088E18093C100EE24FF2425 +:10F8300020E0552400E010E039E0432E93E0292E2B +:10F84000312C2C0E3D1ECDC14150504060407040C7 +:10F8500011F43FE206C08091C00087FFF5CF3091E0 +:10F86000C600933021F1943028F4913099F0923011 +:10F87000C8F407C0953049F1953000F19630D1F5C4 +:10F8800035C03B3119F491E02BE134C03F3291F5A2 +:10F890003983B9C1313011F0351559F52327532E6D +:10F8A00092E028C0B32FA0E0232793E023C0832F4A +:10F8B00090E0A82BB92B232794E01CC03E30C9F45C +:10F8C000232795E0EE24FF2415C0E1E0F0E0EC0FE3 +:10F8D000FD1FEE0DFF1D30830894E11CF11C232752 +:10F8E000EA16FB0639F4D70196E004C0321709F492 +:10F8F0008AC190E041ED5AE363E570E0ACCF90E05F +:10F9000044C08D81803311F090E00AC08F8188233C +:10F9100011F49EE105C0813011F09AE001C096E932 +:10F920001A821B828D818C838E818D839E831F82A0 +:10F9300047E050E0F2C01A8288E08B8381E48C8338 +:10F9400086E58D8382E58E8389E48F8383E58887CE +:10F9500080E589878FE58A8782E38B874BE050E0DB +:10F96000DCC08A81813941F0823941F0803911F45B +:10F970008FE005C080E003C082E001C08AE01A8207 +:10F980008B8343E050E0C9C091E01A8242E050E02E +:10F99000C5C08D81882311F48EE124C0813011F01F +:10F9A0008AE020C086E91EC01A82E1E0F0E04092C1 +:10F9B0005700849118C08B81803579F48C81883010 +:10F9C00031F4E2E0F0E04092570084910BC0E0E0B7 +:10F9D000F0E040925700849105C0E3E0F0E04092EF +:10F9E000570084911A828B831C8244E050E095C0BA +:10F9F000BC80AA248D81082F10E00A291B29000F42 +:10FA0000111F1A8288C09A8088248B81682F70E029 +:10FA100068297929933109F034C0F7EF0F3F1F07A8 +:10FA200010F0A80141C023E0F80120935700E895A9 +:10FA300007B600FCFDCFA801DE011B968C91119644 +:10FA40002C9111971296D22ECC2490E08C299D29CE +:10FA500021E0FA010C0120935700E89511244E5F34 +:10FA60005F4F6250704051F725E0F8012093570036 +:10FA7000E89507B600FCFDCF81E180935700E8953B +:10FA800013C0A801FB01DE011B9641BD52BD4F5FB3 +:10FA90005F4F8D9180BDFA9AF99AF999FECF31970F +:10FAA000A1F7A801460F571F1A828A0134C07A8035 +:10FAB00066248B81A82FB0E0A629B7291A828981F4 +:10FAC000843181F4BD019101F80185919491F9018E +:10FAD000808391832E5F3F4F0E5F1F4F62507040B7 +:10FAE00099F711C0A801BD01910141BD52BD4F5F01 +:10FAF0005F4FF89A80B5F90181939F016150704082 +:10FB0000A1F70A0F1B1FAD014D5F5F4FF901108276 +:10FB100004C080EC8A8342E050E090E0FBE1F09387 +:10FB2000C6008091C00086FFFCCF8091C000806439 +:10FB30008093C0005092C6008091C00086FFFCCF29 +:10FB40008091C00080648093C000652F5093C600F0 +:10FB50008091C00086FFFCCF8091C00080648093BC +:10FB6000C000342F4093C6008091C00086FFFCCFB8 +:10FB70008091C00080648093C0008EE08093C600B6 +:10FB80008091C00086FFFCCF8091C000806480938C +:10FB9000C00025E1252523272627FE01319610C028 +:10FBA00030813093C6008091C00086FFFCCF319633 +:10FBB0008091C00080648093C00023274150504052 +:10FBC0004115510569F72093C6008091C00086FF5A +:10FBD000FCCF8091C00080648093C000992349F4D9 +:10FBE000539441ED5AE363E570E090E0A0E0B0E0AB +:10FBF00032CE5A9881E180935700E89511241F92E4 +:10FC00001F920895FFCF9981933109F4FCCE94316E +:10FC1000C8F4963009F4ECCE973050F4923009F4E1 +:10FC20006ECE933009F49DCE913009F072CF83CE21 +:10FC3000913109F4A9CE923108F0E3CE903109F068 +:10FC400068CF5DCE983109F4B6CE993150F4953134 +:10FC500009F4D9CE953108F42ACF963109F059CF5D +:10FC600026CF9B3109F495CE9C3120F49A3109F0CE +:10FC700050CF9ACE9D3109F444CE9F3209F049CF3E +:02FC8000B8CFFB +:040000030000F80001 +:00000001FF diff --git a/Marlin/Gen7/cores/arduino/HardwareSerial.cpp b/Marlin/Gen7/cores/arduino/HardwareSerial.cpp new file mode 100644 index 000000000..8b1fcc601 --- /dev/null +++ b/Marlin/Gen7/cores/arduino/HardwareSerial.cpp @@ -0,0 +1,239 @@ +/* + HardwareSerial.cpp - Hardware serial library for Wiring + Copyright (c) 2006 Nicholas Zambetti. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Modified 23 November 2006 by David A. Mellis +*/ + +#include +#include +#include +#include "wiring.h" +#include "wiring_private.h" + +#include "HardwareSerial.h" + +// Define constants and variables for buffering incoming serial data. We're +// using a ring buffer (I think), in which rx_buffer_head is the index of the +// location to which to write the next incoming character and rx_buffer_tail +// is the index of the location from which to read. +#define RX_BUFFER_SIZE 128 + +struct ring_buffer { + unsigned char buffer[RX_BUFFER_SIZE]; + int head; + int tail; +}; + +ring_buffer rx_buffer = { { 0 }, 0, 0 }; + +#ifdef UDR1 +ring_buffer rx_buffer1 = { { 0 }, 0, 0 }; +#endif + +#ifdef UDR2 +ring_buffer rx_buffer2 = { { 0 }, 0, 0 }; +#endif +#ifdef UDR3 +ring_buffer rx_buffer3 = { { 0 }, 0, 0 }; +#endif + +inline void store_char(unsigned char c, ring_buffer *rx_buffer) +{ + int i = (rx_buffer->head + 1) % RX_BUFFER_SIZE; + + // if we should be storing the received character into the location + // just before the tail (meaning that the head would advance to the + // current location of the tail), we're about to overflow the buffer + // and so we don't write the character or advance the head. + if (i != rx_buffer->tail) { + rx_buffer->buffer[rx_buffer->head] = c; + rx_buffer->head = i; + } +} + +ISR(USART0_RX_vect) +{ + unsigned char c = UDR0; + store_char(c, &rx_buffer); +} + +#ifdef UDR1 +ISR(USART1_RX_vect) +{ + unsigned char c = UDR1; + store_char(c, &rx_buffer1); +} + +#ifdef UDR2 +ISR(USART2_RX_vect) +{ + unsigned char c = UDR2; + store_char(c, &rx_buffer2); +} + +#ifdef UDR2 +ISR(USART3_RX_vect) +{ + unsigned char c = UDR3; + store_char(c, &rx_buffer3); +} +#endif +#endif + +#else + +#if defined(__AVR_ATmega8__) +SIGNAL(SIG_UART_RECV) +#else +SIGNAL(USART_RX_vect) +#endif +{ +#if defined(__AVR_ATmega8__) + unsigned char c = UDR; +#else + unsigned char c = UDR0; +#endif + store_char(c, &rx_buffer); +} + +#endif + +// Constructors //////////////////////////////////////////////////////////////// + +HardwareSerial::HardwareSerial(ring_buffer *rx_buffer, + volatile uint8_t *ubrrh, volatile uint8_t *ubrrl, + volatile uint8_t *ucsra, volatile uint8_t *ucsrb, + volatile uint8_t *udr, + uint8_t rxen, uint8_t txen, uint8_t rxcie, uint8_t udre, uint8_t u2x) +{ + _rx_buffer = rx_buffer; + _ubrrh = ubrrh; + _ubrrl = ubrrl; + _ucsra = ucsra; + _ucsrb = ucsrb; + _udr = udr; + _rxen = rxen; + _txen = txen; + _rxcie = rxcie; + _udre = udre; + _u2x = u2x; +} + +// Public Methods ////////////////////////////////////////////////////////////// + +void HardwareSerial::begin(long baud) +{ + uint16_t baud_setting; + bool use_u2x; + + // U2X mode is needed for baud rates higher than (CPU Hz / 16) + if (baud > F_CPU / 16) { + use_u2x = true; + } else { + // figure out if U2X mode would allow for a better connection + + // calculate the percent difference between the baud-rate specified and + // the real baud rate for both U2X and non-U2X mode (0-255 error percent) + uint8_t nonu2x_baud_error = abs((int)(255-((F_CPU/(16*(((F_CPU/8/baud-1)/2)+1))*255)/baud))); + uint8_t u2x_baud_error = abs((int)(255-((F_CPU/(8*(((F_CPU/4/baud-1)/2)+1))*255)/baud))); + + // prefer non-U2X mode because it handles clock skew better + use_u2x = (nonu2x_baud_error > u2x_baud_error); + } + + if (use_u2x) { + *_ucsra = 1 << _u2x; + baud_setting = (F_CPU / 4 / baud - 1) / 2; + } else { + *_ucsra = 0; + baud_setting = (F_CPU / 8 / baud - 1) / 2; + } + + // assign the baud_setting, a.k.a. ubbr (USART Baud Rate Register) + *_ubrrh = baud_setting >> 8; + *_ubrrl = baud_setting; + + sbi(*_ucsrb, _rxen); + sbi(*_ucsrb, _txen); + sbi(*_ucsrb, _rxcie); +} + +void HardwareSerial::end() +{ + cbi(*_ucsrb, _rxen); + cbi(*_ucsrb, _txen); + cbi(*_ucsrb, _rxcie); +} + +uint8_t HardwareSerial::available(void) +{ + return (RX_BUFFER_SIZE + _rx_buffer->head - _rx_buffer->tail) % RX_BUFFER_SIZE; +} + +int HardwareSerial::read(void) +{ + // if the head isn't ahead of the tail, we don't have any characters + if (_rx_buffer->head == _rx_buffer->tail) { + return -1; + } else { + unsigned char c = _rx_buffer->buffer[_rx_buffer->tail]; + _rx_buffer->tail = (_rx_buffer->tail + 1) % RX_BUFFER_SIZE; + return c; + } +} + +void HardwareSerial::flush() +{ + // don't reverse this or there may be problems if the RX interrupt + // occurs after reading the value of rx_buffer_head but before writing + // the value to rx_buffer_tail; the previous value of rx_buffer_head + // may be written to rx_buffer_tail, making it appear as if the buffer + // don't reverse this or there may be problems if the RX interrupt + // occurs after reading the value of rx_buffer_head but before writing + // the value to rx_buffer_tail; the previous value of rx_buffer_head + // may be written to rx_buffer_tail, making it appear as if the buffer + // were full, not empty. + _rx_buffer->head = _rx_buffer->tail; +} + +void HardwareSerial::write(uint8_t c) +{ + while (!((*_ucsra) & (1 << _udre))) + ; + + *_udr = c; +} + +// Preinstantiate Objects ////////////////////////////////////////////////////// + +#if defined(__AVR_ATmega8__) +HardwareSerial Serial(&rx_buffer, &UBRRH, &UBRRL, &UCSRA, &UCSRB, &UDR, RXEN, TXEN, RXCIE, UDRE, U2X); +#else +HardwareSerial Serial(&rx_buffer, &UBRR0H, &UBRR0L, &UCSR0A, &UCSR0B, &UDR0, RXEN0, TXEN0, RXCIE0, UDRE0, U2X0); +#endif + +#ifdef UDR1 +HardwareSerial Serial1(&rx_buffer1, &UBRR1H, &UBRR1L, &UCSR1A, &UCSR1B, &UDR1, RXEN1, TXEN1, RXCIE1, UDRE1, U2X1); +#endif + +#ifdef UDR2 +HardwareSerial Serial2(&rx_buffer2, &UBRR2H, &UBRR2L, &UCSR2A, &UCSR2B, &UDR2, RXEN2, TXEN2, RXCIE2, UDRE2, U2X2); +#endif +#ifdef UDR3 +HardwareSerial Serial3(&rx_buffer3, &UBRR3H, &UBRR3L, &UCSR3A, &UCSR3B, &UDR3, RXEN3, TXEN3, RXCIE3, UDRE3, U2X3); +#endif diff --git a/Marlin/Gen7/cores/arduino/HardwareSerial.h b/Marlin/Gen7/cores/arduino/HardwareSerial.h new file mode 100644 index 000000000..f609f73d3 --- /dev/null +++ b/Marlin/Gen7/cores/arduino/HardwareSerial.h @@ -0,0 +1,69 @@ +/* + HardwareSerial.h - Hardware serial library for Wiring + Copyright (c) 2006 Nicholas Zambetti. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef HardwareSerial_h +#define HardwareSerial_h + +#include + +#include "Print.h" + +struct ring_buffer; + +class HardwareSerial : public Print +{ + private: + ring_buffer *_rx_buffer; + volatile uint8_t *_ubrrh; + volatile uint8_t *_ubrrl; + volatile uint8_t *_ucsra; + volatile uint8_t *_ucsrb; + volatile uint8_t *_udr; + uint8_t _rxen; + uint8_t _txen; + uint8_t _rxcie; + uint8_t _udre; + uint8_t _u2x; + public: + HardwareSerial(ring_buffer *rx_buffer, + volatile uint8_t *ubrrh, volatile uint8_t *ubrrl, + volatile uint8_t *ucsra, volatile uint8_t *ucsrb, + volatile uint8_t *udr, + uint8_t rxen, uint8_t txen, uint8_t rxcie, uint8_t udre, uint8_t u2x); + void begin(long); + void end(); + uint8_t available(void); + int read(void); + void flush(void); + virtual void write(uint8_t); + using Print::write; // pull in write(str) and write(buf, size) from Print +}; + +extern HardwareSerial Serial; + +#if defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1280__) +extern HardwareSerial Serial1; +#endif + +#if defined(__AVR_ATmega1280__) +extern HardwareSerial Serial2; +extern HardwareSerial Serial3; +#endif + +#endif diff --git a/Marlin/Gen7/cores/arduino/Makefile b/Marlin/Gen7/cores/arduino/Makefile new file mode 100644 index 000000000..571687db9 --- /dev/null +++ b/Marlin/Gen7/cores/arduino/Makefile @@ -0,0 +1,243 @@ +# Arduino 0011 Makefile +# Arduino adaptation by mellis, eighthave, oli.keller +# +# This makefile allows you to build sketches from the command line +# without the Arduino environment (or Java). +# +# Detailed instructions for using the makefile: +# +# 1. Copy this file into the folder with your sketch. There should be a +# file with the same name as the folder and with the extension .pde +# (e.g. foo.pde in the foo/ folder). +# +# 2. Modify the line containg "INSTALL_DIR" to point to the directory that +# contains the Arduino installation (for example, under Mac OS X, this +# might be /Applications/arduino-0012). +# +# 3. Modify the line containing "PORT" to refer to the filename +# representing the USB or serial connection to your Arduino board +# (e.g. PORT = /dev/tty.USB0). If the exact name of this file +# changes, you can use * as a wildcard (e.g. PORT = /dev/tty.usb*). +# +# 4. Set the line containing "MCU" to match your board's processor. +# Older one's are atmega8 based, newer ones like Arduino Mini, Bluetooth +# or Diecimila have the atmega168. If you're using a LilyPad Arduino, +# change F_CPU to 8000000. +# +# 5. At the command line, change to the directory containing your +# program's file and the makefile. +# +# 6. Type "make" and press enter to compile/verify your program. +# +# 7. Type "make upload", reset your Arduino board, and press enter to +# upload your program to the Arduino board. +# +# $Id$ + +TARGET = $(notdir $(CURDIR)) +INSTALL_DIR = /Users/dmellis/Source/arduino/trunk/build/macosx/build/work +PORT = /dev/tty.usb* +UPLOAD_RATE = 19200 +AVRDUDE_PROGRAMMER = stk500v1 +MCU = atmega168 +F_CPU = 16000000 + +############################################################################ +# Below here nothing should be changed... + +ARDUINO = $(INSTALL_DIR)/hardware/cores/arduino +AVR_TOOLS_PATH = $(INSTALL_DIR)/hardware/tools/avr/bin +SRC = $(ARDUINO)/pins_arduino.c $(ARDUINO)/wiring.c \ +$(ARDUINO)/wiring_analog.c $(ARDUINO)/wiring_digital.c \ +$(ARDUINO)/wiring_pulse.c $(ARDUINO)/wiring_serial.c \ +$(ARDUINO)/wiring_shift.c $(ARDUINO)/WInterrupts.c +CXXSRC = $(ARDUINO)/HardwareSerial.cpp $(ARDUINO)/WMath.cpp +FORMAT = ihex + + +# Name of this Makefile (used for "make depend"). +MAKEFILE = Makefile + +# Debugging format. +# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2. +# AVR (extended) COFF requires stabs, plus an avr-objcopy run. +DEBUG = stabs + +OPT = s + +# Place -D or -U options here +CDEFS = -DF_CPU=$(F_CPU) +CXXDEFS = -DF_CPU=$(F_CPU) + +# Place -I options here +CINCS = -I$(ARDUINO) +CXXINCS = -I$(ARDUINO) + +# Compiler flag to set the C Standard level. +# c89 - "ANSI" C +# gnu89 - c89 plus GCC extensions +# c99 - ISO C99 standard (not yet fully implemented) +# gnu99 - c99 plus GCC extensions +CSTANDARD = -std=gnu99 +CDEBUG = -g$(DEBUG) +CWARN = -Wall -Wstrict-prototypes +CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums +#CEXTRA = -Wa,-adhlns=$(<:.c=.lst) + +CFLAGS = $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CWARN) $(CSTANDARD) $(CEXTRA) +CXXFLAGS = $(CDEFS) $(CINCS) -O$(OPT) +#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs +LDFLAGS = -lm + + +# Programming support using avrdude. Settings and variables. +AVRDUDE_PORT = $(PORT) +AVRDUDE_WRITE_FLASH = -U flash:w:applet/$(TARGET).hex +AVRDUDE_FLAGS = -V -F -C $(INSTALL_DIR)/hardware/tools/avr/etc/avrdude.conf \ +-p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \ +-b $(UPLOAD_RATE) + +# Program settings +CC = $(AVR_TOOLS_PATH)/avr-gcc +CXX = $(AVR_TOOLS_PATH)/avr-g++ +OBJCOPY = $(AVR_TOOLS_PATH)/avr-objcopy +OBJDUMP = $(AVR_TOOLS_PATH)/avr-objdump +AR = $(AVR_TOOLS_PATH)/avr-ar +SIZE = $(AVR_TOOLS_PATH)/avr-size +NM = $(AVR_TOOLS_PATH)/avr-nm +AVRDUDE = $(AVR_TOOLS_PATH)/avrdude +REMOVE = rm -f +MV = mv -f + +# Define all object files. +OBJ = $(SRC:.c=.o) $(CXXSRC:.cpp=.o) $(ASRC:.S=.o) + +# Define all listing files. +LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst) + +# Combine all necessary flags and optional flags. +# Add target processor to flags. +ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) +ALL_CXXFLAGS = -mmcu=$(MCU) -I. $(CXXFLAGS) +ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) + + +# Default target. +all: applet_files build sizeafter + +build: elf hex + +applet_files: $(TARGET).pde + # Here is the "preprocessing". + # It creates a .cpp file based with the same name as the .pde file. + # On top of the new .cpp file comes the WProgram.h header. + # At the end there is a generic main() function attached. + # Then the .cpp file will be compiled. Errors during compile will + # refer to this new, automatically generated, file. + # Not the original .pde file you actually edit... + test -d applet || mkdir applet + echo '#include "WProgram.h"' > applet/$(TARGET).cpp + cat $(TARGET).pde >> applet/$(TARGET).cpp + cat $(ARDUINO)/main.cxx >> applet/$(TARGET).cpp + +elf: applet/$(TARGET).elf +hex: applet/$(TARGET).hex +eep: applet/$(TARGET).eep +lss: applet/$(TARGET).lss +sym: applet/$(TARGET).sym + +# Program the device. +upload: applet/$(TARGET).hex + $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) + + + # Display size of file. +HEXSIZE = $(SIZE) --target=$(FORMAT) applet/$(TARGET).hex +ELFSIZE = $(SIZE) applet/$(TARGET).elf +sizebefore: + @if [ -f applet/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(HEXSIZE); echo; fi + +sizeafter: + @if [ -f applet/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(HEXSIZE); echo; fi + + +# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. +COFFCONVERT=$(OBJCOPY) --debugging \ +--change-section-address .data-0x800000 \ +--change-section-address .bss-0x800000 \ +--change-section-address .noinit-0x800000 \ +--change-section-address .eeprom-0x810000 + + +coff: applet/$(TARGET).elf + $(COFFCONVERT) -O coff-avr applet/$(TARGET).elf $(TARGET).cof + + +extcoff: $(TARGET).elf + $(COFFCONVERT) -O coff-ext-avr applet/$(TARGET).elf $(TARGET).cof + + +.SUFFIXES: .elf .hex .eep .lss .sym + +.elf.hex: + $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ + +.elf.eep: + -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ + --change-section-lma .eeprom=0 -O $(FORMAT) $< $@ + +# Create extended listing file from ELF output file. +.elf.lss: + $(OBJDUMP) -h -S $< > $@ + +# Create a symbol table from ELF output file. +.elf.sym: + $(NM) -n $< > $@ + + # Link: create ELF output file from library. +applet/$(TARGET).elf: $(TARGET).pde applet/core.a + $(CC) $(ALL_CFLAGS) -o $@ applet/$(TARGET).cpp -L. applet/core.a $(LDFLAGS) + +applet/core.a: $(OBJ) + @for i in $(OBJ); do echo $(AR) rcs applet/core.a $$i; $(AR) rcs applet/core.a $$i; done + + + +# Compile: create object files from C++ source files. +.cpp.o: + $(CXX) -c $(ALL_CXXFLAGS) $< -o $@ + +# Compile: create object files from C source files. +.c.o: + $(CC) -c $(ALL_CFLAGS) $< -o $@ + + +# Compile: create assembler files from C source files. +.c.s: + $(CC) -S $(ALL_CFLAGS) $< -o $@ + + +# Assemble: create object files from assembler source files. +.S.o: + $(CC) -c $(ALL_ASFLAGS) $< -o $@ + + + +# Target: clean project. +clean: + $(REMOVE) applet/$(TARGET).hex applet/$(TARGET).eep applet/$(TARGET).cof applet/$(TARGET).elf \ + applet/$(TARGET).map applet/$(TARGET).sym applet/$(TARGET).lss applet/core.a \ + $(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d) + +depend: + if grep '^# DO NOT DELETE' $(MAKEFILE) >/dev/null; \ + then \ + sed -e '/^# DO NOT DELETE/,$$d' $(MAKEFILE) > \ + $(MAKEFILE).$$$$ && \ + $(MV) $(MAKEFILE).$$$$ $(MAKEFILE); \ + fi + echo '# DO NOT DELETE THIS LINE -- make depend depends on it.' \ + >> $(MAKEFILE); \ + $(CC) -M -mmcu=$(MCU) $(CDEFS) $(CINCS) $(SRC) $(ASRC) >> $(MAKEFILE) + +.PHONY: all build elf hex eep lss sym program coff extcoff clean depend applet_files sizebefore sizeafter diff --git a/Marlin/Gen7/cores/arduino/Print.cpp b/Marlin/Gen7/cores/arduino/Print.cpp new file mode 100644 index 000000000..d4833da7c --- /dev/null +++ b/Marlin/Gen7/cores/arduino/Print.cpp @@ -0,0 +1,203 @@ +/* + Print.cpp - Base class that provides print() and println() + Copyright (c) 2008 David A. Mellis. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Modified 23 November 2006 by David A. Mellis + */ + +#include +#include +#include +#include +#include "wiring.h" + +#include "Print.h" + +// Public Methods ////////////////////////////////////////////////////////////// + +void Print::print(uint8_t b) +{ + this->write(b); +} + +void Print::print(char c) +{ + print((byte) c); +} + +void Print::print(const char c[]) +{ + while (*c) + print(*c++); +} + +void Print::print(int n) +{ + print((long) n); +} + +void Print::print(unsigned int n) +{ + print((unsigned long) n); +} + +void Print::print(long n) +{ + if (n < 0) { + print('-'); + n = -n; + } + printNumber(n, 10); +} + +void Print::print(unsigned long n) +{ + printNumber(n, 10); +} + +void Print::print(long n, int base) +{ + if (base == 0) + print((char) n); + else if (base == 10) + print(n); + else + printNumber(n, base); +} + +void Print::print(double n) +{ + printFloat(n, 2); +} + +void Print::println(void) +{ + print('\r'); + print('\n'); +} + +void Print::println(char c) +{ + print(c); + println(); +} + +void Print::println(const char c[]) +{ + print(c); + println(); +} + +void Print::println(uint8_t b) +{ + print(b); + println(); +} + +void Print::println(int n) +{ + print(n); + println(); +} + +void Print::println(unsigned int n) +{ + print(n); + println(); +} + +void Print::println(long n) +{ + print(n); + println(); +} + +void Print::println(unsigned long n) +{ + print(n); + println(); +} + +void Print::println(long n, int base) +{ + print(n, base); + println(); +} + +void Print::println(double n) +{ + print(n); + println(); +} + +// Private Methods ///////////////////////////////////////////////////////////// + +void Print::printNumber(unsigned long n, uint8_t base) +{ + unsigned char buf[8 * sizeof(long)]; // Assumes 8-bit chars. + unsigned long i = 0; + + if (n == 0) { + print('0'); + return; + } + + while (n > 0) { + buf[i++] = n % base; + n /= base; + } + + for (; i > 0; i--) + print((char) (buf[i - 1] < 10 ? + '0' + buf[i - 1] : + 'A' + buf[i - 1] - 10)); +} + +void Print::printFloat(double number, uint8_t digits) +{ + // Handle negative numbers + if (number < 0.0) + { + print('-'); + number = -number; + } + + // Round correctly so that print(1.999, 2) prints as "2.00" + double rounding = 0.5; + for (uint8_t i=0; i 0) + print("."); + + // Extract digits from the remainder one at a time + while (digits-- > 0) + { + remainder *= 10.0; + int toPrint = int(remainder); + print(toPrint); + remainder -= toPrint; + } +} diff --git a/Marlin/Gen7/cores/arduino/Print.h b/Marlin/Gen7/cores/arduino/Print.h new file mode 100644 index 000000000..c95a0dc09 --- /dev/null +++ b/Marlin/Gen7/cores/arduino/Print.h @@ -0,0 +1,59 @@ +/* + Print.h - Base class that provides print() and println() + Copyright (c) 2008 David A. Mellis. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef Print_h +#define Print_h + +#include + +#define DEC 10 +#define HEX 16 +#define OCT 8 +#define BIN 2 +#define BYTE 0 + +class Print +{ + private: + void printNumber(unsigned long, uint8_t); + void printFloat(double, uint8_t); + public: + virtual void write(uint8_t); + void print(char); + void print(const char[]); + void print(uint8_t); + void print(int); + void print(unsigned int); + void print(long); + void print(unsigned long); + void print(long, int); + void print(double); + void println(void); + void println(char); + void println(const char[]); + void println(uint8_t); + void println(int); + void println(unsigned int); + void println(long); + void println(unsigned long); + void println(long, int); + void println(double); +}; + +#endif diff --git a/Marlin/Gen7/cores/arduino/Tone.cpp b/Marlin/Gen7/cores/arduino/Tone.cpp new file mode 100644 index 000000000..827fe49ef --- /dev/null +++ b/Marlin/Gen7/cores/arduino/Tone.cpp @@ -0,0 +1,515 @@ +/* Tone.cpp + + A Tone Generator Library + + Written by Brett Hagman + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +Version Modified By Date Comments +------- ----------- -------- -------- +0001 B Hagman 09/08/02 Initial coding +0002 B Hagman 09/08/18 Multiple pins +0003 B Hagman 09/08/18 Moved initialization from constructor to begin() +0004 B Hagman 09/09/26 Fixed problems with ATmega8 +0005 B Hagman 09/11/23 Scanned prescalars for best fit on 8 bit timers + 09/11/25 Changed pin toggle method to XOR + 09/11/25 Fixed timer0 from being excluded +0006 D Mellis 09/12/29 Replaced objects with functions + +*************************************************/ + +#include +#include +#include +#include + +#if defined(__AVR_ATmega8__) +#define TCCR2A TCCR2 +#define TCCR2B TCCR2 +#define COM2A1 COM21 +#define COM2A0 COM20 +#define OCR2A OCR2 +#define TIMSK2 TIMSK +#define OCIE2A OCIE2 +#define TIMER2_COMPA_vect TIMER2_COMP_vect +#define TIMSK1 TIMSK +#endif + +// timerx_toggle_count: +// > 0 - duration specified +// = 0 - stopped +// < 0 - infinitely (until stop() method called, or new play() called) + +#if !defined(__AVR_ATmega8__) +volatile long timer0_toggle_count; +volatile uint8_t *timer0_pin_port; +volatile uint8_t timer0_pin_mask; +#endif + +volatile long timer1_toggle_count; +volatile uint8_t *timer1_pin_port; +volatile uint8_t timer1_pin_mask; +volatile long timer2_toggle_count; +volatile uint8_t *timer2_pin_port; +volatile uint8_t timer2_pin_mask; + +#if defined(__AVR_ATmega1280__) +volatile long timer3_toggle_count; +volatile uint8_t *timer3_pin_port; +volatile uint8_t timer3_pin_mask; +volatile long timer4_toggle_count; +volatile uint8_t *timer4_pin_port; +volatile uint8_t timer4_pin_mask; +volatile long timer5_toggle_count; +volatile uint8_t *timer5_pin_port; +volatile uint8_t timer5_pin_mask; +#endif + + +#if defined(__AVR_ATmega1280__) + +#define AVAILABLE_TONE_PINS 1 + +const uint8_t PROGMEM tone_pin_to_timer_PGM[] = { 2 /*, 3, 4, 5, 1, 0 */ }; +static uint8_t tone_pins[AVAILABLE_TONE_PINS] = { 255 /*, 255, 255, 255, 255, 255 */ }; + +#elif defined(__AVR_ATmega8__) + +#define AVAILABLE_TONE_PINS 1 + +const uint8_t PROGMEM tone_pin_to_timer_PGM[] = { 2 /*, 1 */ }; +static uint8_t tone_pins[AVAILABLE_TONE_PINS] = { 255 /*, 255 */ }; + +#else + +#define AVAILABLE_TONE_PINS 1 + +// Leave timer 0 to last. +const uint8_t PROGMEM tone_pin_to_timer_PGM[] = { 2 /*, 1, 0 */ }; +static uint8_t tone_pins[AVAILABLE_TONE_PINS] = { 255 /*, 255, 255 */ }; + +#endif + + + +static int8_t toneBegin(uint8_t _pin) +{ + int8_t _timer = -1; + + // if we're already using the pin, the timer should be configured. + for (int i = 0; i < AVAILABLE_TONE_PINS; i++) { + if (tone_pins[i] == _pin) { + return pgm_read_byte(tone_pin_to_timer_PGM + i); + } + } + + // search for an unused timer. + for (int i = 0; i < AVAILABLE_TONE_PINS; i++) { + if (tone_pins[i] == 255) { + tone_pins[i] = _pin; + _timer = pgm_read_byte(tone_pin_to_timer_PGM + i); + break; + } + } + + if (_timer != -1) + { + // Set timer specific stuff + // All timers in CTC mode + // 8 bit timers will require changing prescalar values, + // whereas 16 bit timers are set to either ck/1 or ck/64 prescalar + switch (_timer) + { +#if !defined(__AVR_ATmega8__) + case 0: + // 8 bit timer + TCCR0A = 0; + TCCR0B = 0; + bitWrite(TCCR0A, WGM01, 1); + bitWrite(TCCR0B, CS00, 1); + timer0_pin_port = portOutputRegister(digitalPinToPort(_pin)); + timer0_pin_mask = digitalPinToBitMask(_pin); + break; +#endif + + case 1: + // 16 bit timer + TCCR1A = 0; + TCCR1B = 0; + bitWrite(TCCR1B, WGM12, 1); + bitWrite(TCCR1B, CS10, 1); + timer1_pin_port = portOutputRegister(digitalPinToPort(_pin)); + timer1_pin_mask = digitalPinToBitMask(_pin); + break; + case 2: + // 8 bit timer + TCCR2A = 0; + TCCR2B = 0; + bitWrite(TCCR2A, WGM21, 1); + bitWrite(TCCR2B, CS20, 1); + timer2_pin_port = portOutputRegister(digitalPinToPort(_pin)); + timer2_pin_mask = digitalPinToBitMask(_pin); + break; + +#if defined(__AVR_ATmega1280__) + case 3: + // 16 bit timer + TCCR3A = 0; + TCCR3B = 0; + bitWrite(TCCR3B, WGM32, 1); + bitWrite(TCCR3B, CS30, 1); + timer3_pin_port = portOutputRegister(digitalPinToPort(_pin)); + timer3_pin_mask = digitalPinToBitMask(_pin); + break; + case 4: + // 16 bit timer + TCCR4A = 0; + TCCR4B = 0; + bitWrite(TCCR4B, WGM42, 1); + bitWrite(TCCR4B, CS40, 1); + timer4_pin_port = portOutputRegister(digitalPinToPort(_pin)); + timer4_pin_mask = digitalPinToBitMask(_pin); + break; + case 5: + // 16 bit timer + TCCR5A = 0; + TCCR5B = 0; + bitWrite(TCCR5B, WGM52, 1); + bitWrite(TCCR5B, CS50, 1); + timer5_pin_port = portOutputRegister(digitalPinToPort(_pin)); + timer5_pin_mask = digitalPinToBitMask(_pin); + break; +#endif + } + } + + return _timer; +} + + + +// frequency (in hertz) and duration (in milliseconds). + +void tone(uint8_t _pin, unsigned int frequency, unsigned long duration) +{ + uint8_t prescalarbits = 0b001; + long toggle_count = 0; + uint32_t ocr = 0; + int8_t _timer; + + _timer = toneBegin(_pin); + + if (_timer >= 0) + { + // Set the pinMode as OUTPUT + pinMode(_pin, OUTPUT); + + // if we are using an 8 bit timer, scan through prescalars to find the best fit + if (_timer == 0 || _timer == 2) + { + ocr = F_CPU / frequency / 2 - 1; + prescalarbits = 0b001; // ck/1: same for both timers + if (ocr > 255) + { + ocr = F_CPU / frequency / 2 / 8 - 1; + prescalarbits = 0b010; // ck/8: same for both timers + + if (_timer == 2 && ocr > 255) + { + ocr = F_CPU / frequency / 2 / 32 - 1; + prescalarbits = 0b011; + } + + if (ocr > 255) + { + ocr = F_CPU / frequency / 2 / 64 - 1; + prescalarbits = _timer == 0 ? 0b011 : 0b100; + + if (_timer == 2 && ocr > 255) + { + ocr = F_CPU / frequency / 2 / 128 - 1; + prescalarbits = 0b101; + } + + if (ocr > 255) + { + ocr = F_CPU / frequency / 2 / 256 - 1; + prescalarbits = _timer == 0 ? 0b100 : 0b110; + if (ocr > 255) + { + // can't do any better than /1024 + ocr = F_CPU / frequency / 2 / 1024 - 1; + prescalarbits = _timer == 0 ? 0b101 : 0b111; + } + } + } + } + +#if !defined(__AVR_ATmega8__) + if (_timer == 0) + TCCR0B = prescalarbits; + else +#endif + TCCR2B = prescalarbits; + } + else + { + // two choices for the 16 bit timers: ck/1 or ck/64 + ocr = F_CPU / frequency / 2 - 1; + + prescalarbits = 0b001; + if (ocr > 0xffff) + { + ocr = F_CPU / frequency / 2 / 64 - 1; + prescalarbits = 0b011; + } + + if (_timer == 1) + TCCR1B = (TCCR1B & 0b11111000) | prescalarbits; +#if defined(__AVR_ATmega1280__) + else if (_timer == 3) + TCCR3B = (TCCR3B & 0b11111000) | prescalarbits; + else if (_timer == 4) + TCCR4B = (TCCR4B & 0b11111000) | prescalarbits; + else if (_timer == 5) + TCCR5B = (TCCR5B & 0b11111000) | prescalarbits; +#endif + + } + + + // Calculate the toggle count + if (duration > 0) + { + toggle_count = 2 * frequency * duration / 1000; + } + else + { + toggle_count = -1; + } + + // Set the OCR for the given timer, + // set the toggle count, + // then turn on the interrupts + switch (_timer) + { + +#if !defined(__AVR_ATmega8__) + case 0: + OCR0A = ocr; + timer0_toggle_count = toggle_count; + bitWrite(TIMSK0, OCIE0A, 1); + break; +#endif + + case 1: + OCR1A = ocr; + timer1_toggle_count = toggle_count; + bitWrite(TIMSK1, OCIE1A, 1); + break; + case 2: + OCR2A = ocr; + timer2_toggle_count = toggle_count; + bitWrite(TIMSK2, OCIE2A, 1); + break; + +#if defined(__AVR_ATmega1280__) + case 3: + OCR3A = ocr; + timer3_toggle_count = toggle_count; + bitWrite(TIMSK3, OCIE3A, 1); + break; + case 4: + OCR4A = ocr; + timer4_toggle_count = toggle_count; + bitWrite(TIMSK4, OCIE4A, 1); + break; + case 5: + OCR5A = ocr; + timer5_toggle_count = toggle_count; + bitWrite(TIMSK5, OCIE5A, 1); + break; +#endif + + } + } +} + + +void noTone(uint8_t _pin) +{ + int8_t _timer = -1; + + for (int i = 0; i < AVAILABLE_TONE_PINS; i++) { + if (tone_pins[i] == _pin) { + _timer = pgm_read_byte(tone_pin_to_timer_PGM + i); + tone_pins[i] = 255; + } + } + + switch (_timer) + { +#if defined(__AVR_ATmega8__) + case 1: + bitWrite(TIMSK1, OCIE1A, 0); + break; + case 2: + bitWrite(TIMSK2, OCIE2A, 0); + break; + +#else + case 0: + TIMSK0 = 0; + break; + case 1: + TIMSK1 = 0; + break; + case 2: + TIMSK2 = 0; + break; +#endif + +#if defined(__AVR_ATmega1280__) + case 3: + TIMSK3 = 0; + break; + case 4: + TIMSK4 = 0; + break; + case 5: + TIMSK5 = 0; + break; +#endif + } + + digitalWrite(_pin, 0); +} + +#if 0 +#if !defined(__AVR_ATmega8__) +ISR(TIMER0_COMPA_vect) +{ + if (timer0_toggle_count != 0) + { + // toggle the pin + *timer0_pin_port ^= timer0_pin_mask; + + if (timer0_toggle_count > 0) + timer0_toggle_count--; + } + else + { + TIMSK0 = 0; // disable the interrupt + *timer0_pin_port &= ~(timer0_pin_mask); // keep pin low after stop + } +} +#endif + + +ISR(TIMER1_COMPA_vect) +{ + if (timer1_toggle_count != 0) + { + // toggle the pin + *timer1_pin_port ^= timer1_pin_mask; + + if (timer1_toggle_count > 0) + timer1_toggle_count--; + } + else + { + TIMSK1 = 0; // disable the interrupt + *timer1_pin_port &= ~(timer1_pin_mask); // keep pin low after stop + } +} +#endif + + +ISR(TIMER2_COMPA_vect) +{ + + if (timer2_toggle_count != 0) + { + // toggle the pin + *timer2_pin_port ^= timer2_pin_mask; + + if (timer2_toggle_count > 0) + timer2_toggle_count--; + } + else + { + TIMSK2 = 0; // disable the interrupt + *timer2_pin_port &= ~(timer2_pin_mask); // keep pin low after stop + } +} + + + +//#if defined(__AVR_ATmega1280__) +#if 0 + +ISR(TIMER3_COMPA_vect) +{ + if (timer3_toggle_count != 0) + { + // toggle the pin + *timer3_pin_port ^= timer3_pin_mask; + + if (timer3_toggle_count > 0) + timer3_toggle_count--; + } + else + { + TIMSK3 = 0; // disable the interrupt + *timer3_pin_port &= ~(timer3_pin_mask); // keep pin low after stop + } +} + +ISR(TIMER4_COMPA_vect) +{ + if (timer4_toggle_count != 0) + { + // toggle the pin + *timer4_pin_port ^= timer4_pin_mask; + + if (timer4_toggle_count > 0) + timer4_toggle_count--; + } + else + { + TIMSK4 = 0; // disable the interrupt + *timer4_pin_port &= ~(timer4_pin_mask); // keep pin low after stop + } +} + +ISR(TIMER5_COMPA_vect) +{ + if (timer5_toggle_count != 0) + { + // toggle the pin + *timer5_pin_port ^= timer5_pin_mask; + + if (timer5_toggle_count > 0) + timer5_toggle_count--; + } + else + { + TIMSK5 = 0; // disable the interrupt + *timer5_pin_port &= ~(timer5_pin_mask); // keep pin low after stop + } +} + +#endif diff --git a/Marlin/Gen7/cores/arduino/WCharacter.h b/Marlin/Gen7/cores/arduino/WCharacter.h new file mode 100644 index 000000000..79733b50a --- /dev/null +++ b/Marlin/Gen7/cores/arduino/WCharacter.h @@ -0,0 +1,168 @@ +/* + WCharacter.h - Character utility functions for Wiring & Arduino + Copyright (c) 2010 Hernando Barragan. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef Character_h +#define Character_h + +#include + +// WCharacter.h prototypes +inline boolean isAlphaNumeric(int c) __attribute__((always_inline)); +inline boolean isAlpha(int c) __attribute__((always_inline)); +inline boolean isAscii(int c) __attribute__((always_inline)); +inline boolean isWhitespace(int c) __attribute__((always_inline)); +inline boolean isControl(int c) __attribute__((always_inline)); +inline boolean isDigit(int c) __attribute__((always_inline)); +inline boolean isGraph(int c) __attribute__((always_inline)); +inline boolean isLowerCase(int c) __attribute__((always_inline)); +inline boolean isPrintable(int c) __attribute__((always_inline)); +inline boolean isPunct(int c) __attribute__((always_inline)); +inline boolean isSpace(int c) __attribute__((always_inline)); +inline boolean isUpperCase(int c) __attribute__((always_inline)); +inline boolean isHexadecimalDigit(int c) __attribute__((always_inline)); +inline int toAscii(int c) __attribute__((always_inline)); +inline int toLowerCase(int c) __attribute__((always_inline)); +inline int toUpperCase(int c)__attribute__((always_inline)); + + +// Checks for an alphanumeric character. +// It is equivalent to (isalpha(c) || isdigit(c)). +inline boolean isAlphaNumeric(int c) +{ + return ( isalnum(c) == 0 ? false : true); +} + + +// Checks for an alphabetic character. +// It is equivalent to (isupper(c) || islower(c)). +inline boolean isAlpha(int c) +{ + return ( isalpha(c) == 0 ? false : true); +} + + +// Checks whether c is a 7-bit unsigned char value +// that fits into the ASCII character set. +inline boolean isAscii(int c) +{ + return ( isascii (c) == 0 ? false : true); +} + + +// Checks for a blank character, that is, a space or a tab. +inline boolean isWhitespace(int c) +{ + return ( isblank (c) == 0 ? false : true); +} + + +// Checks for a control character. +inline boolean isControl(int c) +{ + return ( iscntrl (c) == 0 ? false : true); +} + + +// Checks for a digit (0 through 9). +inline boolean isDigit(int c) +{ + return ( isdigit (c) == 0 ? false : true); +} + + +// Checks for any printable character except space. +inline boolean isGraph(int c) +{ + return ( isgraph (c) == 0 ? false : true); +} + + +// Checks for a lower-case character. +inline boolean isLowerCase(int c) +{ + return (islower (c) == 0 ? false : true); +} + + +// Checks for any printable character including space. +inline boolean isPrintable(int c) +{ + return ( isprint (c) == 0 ? false : true); +} + + +// Checks for any printable character which is not a space +// or an alphanumeric character. +inline boolean isPunct(int c) +{ + return ( ispunct (c) == 0 ? false : true); +} + + +// Checks for white-space characters. For the avr-libc library, +// these are: space, formfeed ('\f'), newline ('\n'), carriage +// return ('\r'), horizontal tab ('\t'), and vertical tab ('\v'). +inline boolean isSpace(int c) +{ + return ( isspace (c) == 0 ? false : true); +} + + +// Checks for an uppercase letter. +inline boolean isUpperCase(int c) +{ + return ( isupper (c) == 0 ? false : true); +} + + +// Checks for a hexadecimal digits, i.e. one of 0 1 2 3 4 5 6 7 +// 8 9 a b c d e f A B C D E F. +inline boolean isHexadecimalDigit(int c) +{ + return ( isxdigit (c) == 0 ? false : true); +} + + +// Converts c to a 7-bit unsigned char value that fits into the +// ASCII character set, by clearing the high-order bits. +inline int toAscii(int c) +{ + return toascii (c); +} + + +// Warning: +// Many people will be unhappy if you use this function. +// This function will convert accented letters into random +// characters. + +// Converts the letter c to lower case, if possible. +inline int toLowerCase(int c) +{ + return tolower (c); +} + + +// Converts the letter c to upper case, if possible. +inline int toUpperCase(int c) +{ + return toupper (c); +} + +#endif \ No newline at end of file diff --git a/Marlin/Gen7/cores/arduino/WConstants.h b/Marlin/Gen7/cores/arduino/WConstants.h new file mode 100644 index 000000000..3e19ac44a --- /dev/null +++ b/Marlin/Gen7/cores/arduino/WConstants.h @@ -0,0 +1 @@ +#include "wiring.h" diff --git a/Marlin/Gen7/cores/arduino/WInterrupts.c b/Marlin/Gen7/cores/arduino/WInterrupts.c new file mode 100644 index 000000000..6f3f0b130 --- /dev/null +++ b/Marlin/Gen7/cores/arduino/WInterrupts.c @@ -0,0 +1,87 @@ +/* -*- mode: jde; c-basic-offset: 2; indent-tabs-mode: nil -*- */ + +/* + Part of the Wiring project - http://wiring.uniandes.edu.co + + Copyright (c) 2004-05 Hernando Barragan + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + Modified 24 November 2006 by David A. Mellis +*/ + +#include +#include +#include +#include +#include + +#include "WConstants.h" +#include "wiring_private.h" + +volatile static voidFuncPtr intFunc[EXTERNAL_NUM_INTERRUPTS]; +// volatile static voidFuncPtr twiIntFunc; + +void attachInterrupt(uint8_t interruptNum, void (*userFunc)(void), int mode) +{ + if(interruptNum < EXTERNAL_NUM_INTERRUPTS) + { + intFunc[interruptNum] = userFunc; + + //clear the config for the change settings + EICRA &= ~(B00000011 << (interruptNum * 2)); + + //set our mode. + EICRA |= (mode << (interruptNum * 2)); + + // Enable the interrupt. + EIMSK |= (1 << interruptNum); + } +} + +void detachInterrupt(uint8_t interruptNum) +{ + if(interruptNum < EXTERNAL_NUM_INTERRUPTS) + { + // Disable the interrupt. + EIMSK &= ~(1 << interruptNum); + + intFunc[interruptNum] = 0; + } +} + +ISR(INT0_vect) { + if(intFunc[EXTERNAL_INT_0]) + intFunc[EXTERNAL_INT_0](); +} + +ISR(INT1_vect) { + if(intFunc[EXTERNAL_INT_1]) + intFunc[EXTERNAL_INT_1](); +} + +ISR(INT2_vect) { + if(intFunc[EXTERNAL_INT_2]) + intFunc[EXTERNAL_INT_2](); +} + +/* +SIGNAL(SIG_2WIRE_SERIAL) { + if(twiIntFunc) + twiIntFunc(); +} +*/ + diff --git a/Marlin/Gen7/cores/arduino/WMath.cpp b/Marlin/Gen7/cores/arduino/WMath.cpp new file mode 100644 index 000000000..7a230f542 --- /dev/null +++ b/Marlin/Gen7/cores/arduino/WMath.cpp @@ -0,0 +1,60 @@ +/* -*- mode: jde; c-basic-offset: 2; indent-tabs-mode: nil -*- */ + +/* + Part of the Wiring project - http://wiring.org.co + Copyright (c) 2004-06 Hernando Barragan + Modified 13 August 2006, David A. Mellis for Arduino - http://www.arduino.cc/ + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id$ +*/ + +extern "C" { + #include "stdlib.h" +} + +void randomSeed(unsigned int seed) +{ + if (seed != 0){ + srandom(seed); + } +} + +long random(long howbig) +{ + if (howbig == 0) { + return 0; + } + return random() % howbig; +} + +long random(long howsmall, long howbig) +{ + if (howsmall >= howbig) { + return howsmall; + } + long diff = howbig - howsmall; + return random(diff) + howsmall; +} + +long map(long x, long in_min, long in_max, long out_min, long out_max) +{ + return (x - in_min) * (out_max - out_min) / (in_max - in_min) + out_min; +} + +unsigned int makeWord(unsigned int w) { return w; } +unsigned int makeWord(unsigned char h, unsigned char l) { return (h << 8) | l; } diff --git a/Marlin/Gen7/cores/arduino/WProgram.h b/Marlin/Gen7/cores/arduino/WProgram.h new file mode 100644 index 000000000..2c7ed16d8 --- /dev/null +++ b/Marlin/Gen7/cores/arduino/WProgram.h @@ -0,0 +1,34 @@ +#ifndef WProgram_h +#define WProgram_h + +#include +#include +#include + +#include + +#include "wiring.h" + +#ifdef __cplusplus +#include "WCharacter.h" +#include "WString.h" +#include "HardwareSerial.h" + +uint16_t makeWord(uint16_t w); +uint16_t makeWord(byte h, byte l); + +#define word(...) makeWord(__VA_ARGS__) + +unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout = 1000000L); + +void tone(uint8_t _pin, unsigned int frequency, unsigned long duration = 0); +void noTone(uint8_t _pin); + +// WMath prototypes +long random(long); +long random(long, long); +void randomSeed(unsigned int); +long map(long, long, long, long, long); +#endif + +#endif diff --git a/Marlin/Gen7/cores/arduino/WString.cpp b/Marlin/Gen7/cores/arduino/WString.cpp new file mode 100644 index 000000000..db5a441dc --- /dev/null +++ b/Marlin/Gen7/cores/arduino/WString.cpp @@ -0,0 +1,443 @@ +/* + WString.cpp - String library for Wiring & Arduino + Copyright (c) 2009-10 Hernando Barragan. All rights reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#include +#include "WProgram.h" +#include "WString.h" + + +String::String( const char *value ) +{ + if ( value == NULL ) + value = ""; + getBuffer( _length = strlen( value ) ); + if ( _buffer != NULL ) + strcpy( _buffer, value ); +} + +String::String( const String &value ) +{ + getBuffer( _length = value._length ); + if ( _buffer != NULL ) + strcpy( _buffer, value._buffer ); +} + +String::String( const char value ) +{ + _length = 1; + getBuffer(1); + if ( _buffer != NULL ) { + _buffer[0] = value; + _buffer[1] = 0; + } +} + +String::String( const unsigned char value ) +{ + _length = 1; + getBuffer(1); + if ( _buffer != NULL) { + _buffer[0] = value; + _buffer[1] = 0; + } +} + +String::String( const int value, const int base ) +{ + char buf[33]; + itoa((signed long)value, buf, base); + getBuffer( _length = strlen(buf) ); + if ( _buffer != NULL ) + strcpy( _buffer, buf ); +} + +String::String( const unsigned int value, const int base ) +{ + char buf[33]; + ultoa((unsigned long)value, buf, base); + getBuffer( _length = strlen(buf) ); + if ( _buffer != NULL ) + strcpy( _buffer, buf ); +} + +String::String( const long value, const int base ) +{ + char buf[33]; + ltoa(value, buf, base); + getBuffer( _length = strlen(buf) ); + if ( _buffer != NULL ) + strcpy( _buffer, buf ); +} + +String::String( const unsigned long value, const int base ) +{ + char buf[33]; + ultoa(value, buf, 10); + getBuffer( _length = strlen(buf) ); + if ( _buffer != NULL ) + strcpy( _buffer, buf ); +} + +char String::charAt( unsigned int loc ) const +{ + return operator[]( loc ); +} + +void String::setCharAt( unsigned int loc, const char aChar ) +{ + if(_buffer == NULL) return; + if(_length > loc) { + _buffer[loc] = aChar; + } +} + +int String::compareTo( const String &s2 ) const +{ + return strcmp( _buffer, s2._buffer ); +} + +const String & String::concat( const String &s2 ) +{ + return (*this) += s2; +} + +const String & String::operator=( const String &rhs ) +{ + if ( this == &rhs ) + return *this; + + if ( rhs._length > _length ) + { + free(_buffer); + getBuffer( rhs._length ); + } + + if ( _buffer != NULL ) { + _length = rhs._length; + strcpy( _buffer, rhs._buffer ); + } + return *this; +} + +//const String & String::operator+=( const char aChar ) +//{ +// if ( _length == _capacity ) +// doubleBuffer(); +// +// _buffer[ _length++ ] = aChar; +// _buffer[ _length ] = '\0'; +// return *this; +//} + +const String & String::operator+=( const String &other ) +{ + _length += other._length; + if ( _length > _capacity ) + { + char *temp = (char *)realloc(_buffer, _length + 1); + if ( temp != NULL ) { + _buffer = temp; + _capacity = _length; + } else { + _length -= other._length; + return *this; + } + } + strcat( _buffer, other._buffer ); + return *this; +} + + +int String::operator==( const String &rhs ) const +{ + return ( _length == rhs._length && strcmp( _buffer, rhs._buffer ) == 0 ); +} + +int String::operator!=( const String &rhs ) const +{ + return ( _length != rhs.length() || strcmp( _buffer, rhs._buffer ) != 0 ); +} + +int String::operator<( const String &rhs ) const +{ + return strcmp( _buffer, rhs._buffer ) < 0; +} + +int String::operator>( const String &rhs ) const +{ + return strcmp( _buffer, rhs._buffer ) > 0; +} + +int String::operator<=( const String &rhs ) const +{ + return strcmp( _buffer, rhs._buffer ) <= 0; +} + +int String::operator>=( const String & rhs ) const +{ + return strcmp( _buffer, rhs._buffer ) >= 0; +} + +char & String::operator[]( unsigned int index ) +{ + static char dummy_writable_char; + if (index >= _length || !_buffer) { + dummy_writable_char = 0; + return dummy_writable_char; + } + return _buffer[ index ]; +} + +char String::operator[]( unsigned int index ) const +{ + // need to check for valid index, to do later + return _buffer[ index ]; +} + +boolean String::endsWith( const String &s2 ) const +{ + if ( _length < s2._length ) + return 0; + + return strcmp( &_buffer[ _length - s2._length], s2._buffer ) == 0; +} + +boolean String::equals( const String &s2 ) const +{ + return ( _length == s2._length && strcmp( _buffer,s2._buffer ) == 0 ); +} + +boolean String::equalsIgnoreCase( const String &s2 ) const +{ + if ( this == &s2 ) + return true; //1; + else if ( _length != s2._length ) + return false; //0; + + return strcmp(toLowerCase()._buffer, s2.toLowerCase()._buffer) == 0; +} + +String String::replace( char findChar, char replaceChar ) +{ + if ( _buffer == NULL ) return *this; + String theReturn = _buffer; + char* temp = theReturn._buffer; + while( (temp = strchr( temp, findChar )) != 0 ) + *temp = replaceChar; + + return theReturn; +} + +String String::replace( const String& match, const String& replace ) +{ + if ( _buffer == NULL ) return *this; + String temp = _buffer, newString; + + int loc; + while ( (loc = temp.indexOf( match )) != -1 ) + { + newString += temp.substring( 0, loc ); + newString += replace; + temp = temp.substring( loc + match._length ); + } + newString += temp; + return newString; +} + +int String::indexOf( char temp ) const +{ + return indexOf( temp, 0 ); +} + +int String::indexOf( char ch, unsigned int fromIndex ) const +{ + if ( fromIndex >= _length ) + return -1; + + const char* temp = strchr( &_buffer[fromIndex], ch ); + if ( temp == NULL ) + return -1; + + return temp - _buffer; +} + +int String::indexOf( const String &s2 ) const +{ + return indexOf( s2, 0 ); +} + +int String::indexOf( const String &s2, unsigned int fromIndex ) const +{ + if ( fromIndex >= _length ) + return -1; + + const char *theFind = strstr( &_buffer[ fromIndex ], s2._buffer ); + + if ( theFind == NULL ) + return -1; + + return theFind - _buffer; // pointer subtraction +} + +int String::lastIndexOf( char theChar ) const +{ + return lastIndexOf( theChar, _length - 1 ); +} + +int String::lastIndexOf( char ch, unsigned int fromIndex ) const +{ + if ( fromIndex >= _length ) + return -1; + + char tempchar = _buffer[fromIndex + 1]; + _buffer[fromIndex + 1] = '\0'; + char* temp = strrchr( _buffer, ch ); + _buffer[fromIndex + 1] = tempchar; + + if ( temp == NULL ) + return -1; + + return temp - _buffer; +} + +int String::lastIndexOf( const String &s2 ) const +{ + return lastIndexOf( s2, _length - s2._length ); +} + +int String::lastIndexOf( const String &s2, unsigned int fromIndex ) const +{ + // check for empty strings + if ( s2._length == 0 || s2._length - 1 > fromIndex || fromIndex >= _length ) + return -1; + + // matching first character + char temp = s2[ 0 ]; + + for ( int i = fromIndex; i >= 0; i-- ) + { + if ( _buffer[ i ] == temp && (*this).substring( i, i + s2._length ).equals( s2 ) ) + return i; + } + return -1; +} + +boolean String::startsWith( const String &s2 ) const +{ + if ( _length < s2._length ) + return 0; + + return startsWith( s2, 0 ); +} + +boolean String::startsWith( const String &s2, unsigned int offset ) const +{ + if ( offset > _length - s2._length ) + return 0; + + return strncmp( &_buffer[offset], s2._buffer, s2._length ) == 0; +} + +String String::substring( unsigned int left ) const +{ + return substring( left, _length ); +} + +String String::substring( unsigned int left, unsigned int right ) const +{ + if ( left > right ) + { + int temp = right; + right = left; + left = temp; + } + + if ( right > _length ) + { + right = _length; + } + + char temp = _buffer[ right ]; // save the replaced character + _buffer[ right ] = '\0'; + String outPut = ( _buffer + left ); // pointer arithmetic + _buffer[ right ] = temp; //restore character + return outPut; +} + +String String::toLowerCase() const +{ + String temp = _buffer; + + for ( unsigned int i = 0; i < _length; i++ ) + temp._buffer[ i ] = (char)tolower( temp._buffer[ i ] ); + return temp; +} + +String String::toUpperCase() const +{ + String temp = _buffer; + + for ( unsigned int i = 0; i < _length; i++ ) + temp._buffer[ i ] = (char)toupper( temp._buffer[ i ] ); + return temp; +} + +String String::trim() const +{ + if ( _buffer == NULL ) return *this; + String temp = _buffer; + unsigned int i,j; + + for ( i = 0; i < _length; i++ ) + { + if ( !isspace(_buffer[i]) ) + break; + } + + for ( j = temp._length - 1; j > i; j-- ) + { + if ( !isspace(_buffer[j]) ) + break; + } + + return temp.substring( i, j + 1); +} + +void String::getBytes(unsigned char *buf, unsigned int bufsize) +{ + if (!bufsize || !buf) return; + unsigned int len = bufsize - 1; + if (len > _length) len = _length; + strncpy((char *)buf, _buffer, len); + buf[len] = 0; +} + +void String::toCharArray(char *buf, unsigned int bufsize) +{ + if (!bufsize || !buf) return; + unsigned int len = bufsize - 1; + if (len > _length) len = _length; + strncpy(buf, _buffer, len); + buf[len] = 0; +} + + +long String::toInt() { + return atol(_buffer); +} diff --git a/Marlin/Gen7/cores/arduino/WString.h b/Marlin/Gen7/cores/arduino/WString.h new file mode 100644 index 000000000..cadddb947 --- /dev/null +++ b/Marlin/Gen7/cores/arduino/WString.h @@ -0,0 +1,112 @@ +/* + WString.h - String library for Wiring & Arduino + Copyright (c) 2009-10 Hernando Barragan. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef String_h +#define String_h + +//#include "WProgram.h" +#include +#include +#include + +class String +{ + public: + // constructors + String( const char *value = "" ); + String( const String &value ); + String( const char ); + String( const unsigned char ); + String( const int, const int base=10); + String( const unsigned int, const int base=10 ); + String( const long, const int base=10 ); + String( const unsigned long, const int base=10 ); + ~String() { free(_buffer); _length = _capacity = 0;} //added _length = _capacity = 0; + + // operators + const String & operator = ( const String &rhs ); + const String & operator +=( const String &rhs ); + //const String & operator +=( const char ); + int operator ==( const String &rhs ) const; + int operator !=( const String &rhs ) const; + int operator < ( const String &rhs ) const; + int operator > ( const String &rhs ) const; + int operator <=( const String &rhs ) const; + int operator >=( const String &rhs ) const; + char operator []( unsigned int index ) const; + char& operator []( unsigned int index ); + //operator const char *() const { return _buffer; } + + // general methods + char charAt( unsigned int index ) const; + int compareTo( const String &anotherString ) const; + unsigned char endsWith( const String &suffix ) const; + unsigned char equals( const String &anObject ) const; + unsigned char equalsIgnoreCase( const String &anotherString ) const; + int indexOf( char ch ) const; + int indexOf( char ch, unsigned int fromIndex ) const; + int indexOf( const String &str ) const; + int indexOf( const String &str, unsigned int fromIndex ) const; + int lastIndexOf( char ch ) const; + int lastIndexOf( char ch, unsigned int fromIndex ) const; + int lastIndexOf( const String &str ) const; + int lastIndexOf( const String &str, unsigned int fromIndex ) const; + const unsigned int length( ) const { return _length; } + void setCharAt(unsigned int index, const char ch); + unsigned char startsWith( const String &prefix ) const; + unsigned char startsWith( const String &prefix, unsigned int toffset ) const; + String substring( unsigned int beginIndex ) const; + String substring( unsigned int beginIndex, unsigned int endIndex ) const; + String toLowerCase( ) const; + String toUpperCase( ) const; + String trim( ) const; + void getBytes(unsigned char *buf, unsigned int bufsize); + void toCharArray(char *buf, unsigned int bufsize); + long toInt( ); + const String& concat( const String &str ); + String replace( char oldChar, char newChar ); + String replace( const String& match, const String& replace ); + friend String operator + ( String lhs, const String &rhs ); + + protected: + char *_buffer; // the actual char array + unsigned int _capacity; // the array length minus one (for the '\0') + unsigned int _length; // the String length (not counting the '\0') + + void getBuffer(unsigned int maxStrLen); + + private: + +}; + +// allocate buffer space +inline void String::getBuffer(unsigned int maxStrLen) +{ + _capacity = maxStrLen; + _buffer = (char *) malloc(_capacity + 1); + if (_buffer == NULL) _length = _capacity = 0; +} + +inline String operator+( String lhs, const String &rhs ) +{ + return lhs += rhs; +} + + +#endif diff --git a/Marlin/Gen7/cores/arduino/binary.h b/Marlin/Gen7/cores/arduino/binary.h new file mode 100644 index 000000000..af1498033 --- /dev/null +++ b/Marlin/Gen7/cores/arduino/binary.h @@ -0,0 +1,515 @@ +#ifndef Binary_h +#define Binary_h + +#define B0 0 +#define B00 0 +#define B000 0 +#define B0000 0 +#define B00000 0 +#define B000000 0 +#define B0000000 0 +#define B00000000 0 +#define B1 1 +#define B01 1 +#define B001 1 +#define B0001 1 +#define B00001 1 +#define B000001 1 +#define B0000001 1 +#define B00000001 1 +#define B10 2 +#define B010 2 +#define B0010 2 +#define B00010 2 +#define B000010 2 +#define B0000010 2 +#define B00000010 2 +#define B11 3 +#define B011 3 +#define B0011 3 +#define B00011 3 +#define B000011 3 +#define B0000011 3 +#define B00000011 3 +#define B100 4 +#define B0100 4 +#define B00100 4 +#define B000100 4 +#define B0000100 4 +#define B00000100 4 +#define B101 5 +#define B0101 5 +#define B00101 5 +#define B000101 5 +#define B0000101 5 +#define B00000101 5 +#define B110 6 +#define B0110 6 +#define B00110 6 +#define B000110 6 +#define B0000110 6 +#define B00000110 6 +#define B111 7 +#define B0111 7 +#define B00111 7 +#define B000111 7 +#define B0000111 7 +#define B00000111 7 +#define B1000 8 +#define B01000 8 +#define B001000 8 +#define B0001000 8 +#define B00001000 8 +#define B1001 9 +#define B01001 9 +#define B001001 9 +#define B0001001 9 +#define B00001001 9 +#define B1010 10 +#define B01010 10 +#define B001010 10 +#define B0001010 10 +#define B00001010 10 +#define B1011 11 +#define B01011 11 +#define B001011 11 +#define B0001011 11 +#define B00001011 11 +#define B1100 12 +#define B01100 12 +#define B001100 12 +#define B0001100 12 +#define B00001100 12 +#define B1101 13 +#define B01101 13 +#define B001101 13 +#define B0001101 13 +#define B00001101 13 +#define B1110 14 +#define B01110 14 +#define B001110 14 +#define B0001110 14 +#define B00001110 14 +#define B1111 15 +#define B01111 15 +#define B001111 15 +#define B0001111 15 +#define B00001111 15 +#define B10000 16 +#define B010000 16 +#define B0010000 16 +#define B00010000 16 +#define B10001 17 +#define B010001 17 +#define B0010001 17 +#define B00010001 17 +#define B10010 18 +#define B010010 18 +#define B0010010 18 +#define B00010010 18 +#define B10011 19 +#define B010011 19 +#define B0010011 19 +#define B00010011 19 +#define B10100 20 +#define B010100 20 +#define B0010100 20 +#define B00010100 20 +#define B10101 21 +#define B010101 21 +#define B0010101 21 +#define B00010101 21 +#define B10110 22 +#define B010110 22 +#define B0010110 22 +#define B00010110 22 +#define B10111 23 +#define B010111 23 +#define B0010111 23 +#define B00010111 23 +#define B11000 24 +#define B011000 24 +#define B0011000 24 +#define B00011000 24 +#define B11001 25 +#define B011001 25 +#define B0011001 25 +#define B00011001 25 +#define B11010 26 +#define B011010 26 +#define B0011010 26 +#define B00011010 26 +#define B11011 27 +#define B011011 27 +#define B0011011 27 +#define B00011011 27 +#define B11100 28 +#define B011100 28 +#define B0011100 28 +#define B00011100 28 +#define B11101 29 +#define B011101 29 +#define B0011101 29 +#define B00011101 29 +#define B11110 30 +#define B011110 30 +#define B0011110 30 +#define B00011110 30 +#define B11111 31 +#define B011111 31 +#define B0011111 31 +#define B00011111 31 +#define B100000 32 +#define B0100000 32 +#define B00100000 32 +#define B100001 33 +#define B0100001 33 +#define B00100001 33 +#define B100010 34 +#define B0100010 34 +#define B00100010 34 +#define B100011 35 +#define B0100011 35 +#define B00100011 35 +#define B100100 36 +#define B0100100 36 +#define B00100100 36 +#define B100101 37 +#define B0100101 37 +#define B00100101 37 +#define B100110 38 +#define B0100110 38 +#define B00100110 38 +#define B100111 39 +#define B0100111 39 +#define B00100111 39 +#define B101000 40 +#define B0101000 40 +#define B00101000 40 +#define B101001 41 +#define B0101001 41 +#define B00101001 41 +#define B101010 42 +#define B0101010 42 +#define B00101010 42 +#define B101011 43 +#define B0101011 43 +#define B00101011 43 +#define B101100 44 +#define B0101100 44 +#define B00101100 44 +#define B101101 45 +#define B0101101 45 +#define B00101101 45 +#define B101110 46 +#define B0101110 46 +#define B00101110 46 +#define B101111 47 +#define B0101111 47 +#define B00101111 47 +#define B110000 48 +#define B0110000 48 +#define B00110000 48 +#define B110001 49 +#define B0110001 49 +#define B00110001 49 +#define B110010 50 +#define B0110010 50 +#define B00110010 50 +#define B110011 51 +#define B0110011 51 +#define B00110011 51 +#define B110100 52 +#define B0110100 52 +#define B00110100 52 +#define B110101 53 +#define B0110101 53 +#define B00110101 53 +#define B110110 54 +#define B0110110 54 +#define B00110110 54 +#define B110111 55 +#define B0110111 55 +#define B00110111 55 +#define B111000 56 +#define B0111000 56 +#define B00111000 56 +#define B111001 57 +#define B0111001 57 +#define B00111001 57 +#define B111010 58 +#define B0111010 58 +#define B00111010 58 +#define B111011 59 +#define B0111011 59 +#define B00111011 59 +#define B111100 60 +#define B0111100 60 +#define B00111100 60 +#define B111101 61 +#define B0111101 61 +#define B00111101 61 +#define B111110 62 +#define B0111110 62 +#define B00111110 62 +#define B111111 63 +#define B0111111 63 +#define B00111111 63 +#define B1000000 64 +#define B01000000 64 +#define B1000001 65 +#define B01000001 65 +#define B1000010 66 +#define B01000010 66 +#define B1000011 67 +#define B01000011 67 +#define B1000100 68 +#define B01000100 68 +#define B1000101 69 +#define B01000101 69 +#define B1000110 70 +#define B01000110 70 +#define B1000111 71 +#define B01000111 71 +#define B1001000 72 +#define B01001000 72 +#define B1001001 73 +#define B01001001 73 +#define B1001010 74 +#define B01001010 74 +#define B1001011 75 +#define B01001011 75 +#define B1001100 76 +#define B01001100 76 +#define B1001101 77 +#define B01001101 77 +#define B1001110 78 +#define B01001110 78 +#define B1001111 79 +#define B01001111 79 +#define B1010000 80 +#define B01010000 80 +#define B1010001 81 +#define B01010001 81 +#define B1010010 82 +#define B01010010 82 +#define B1010011 83 +#define B01010011 83 +#define B1010100 84 +#define B01010100 84 +#define B1010101 85 +#define B01010101 85 +#define B1010110 86 +#define B01010110 86 +#define B1010111 87 +#define B01010111 87 +#define B1011000 88 +#define B01011000 88 +#define B1011001 89 +#define B01011001 89 +#define B1011010 90 +#define B01011010 90 +#define B1011011 91 +#define B01011011 91 +#define B1011100 92 +#define B01011100 92 +#define B1011101 93 +#define B01011101 93 +#define B1011110 94 +#define B01011110 94 +#define B1011111 95 +#define B01011111 95 +#define B1100000 96 +#define B01100000 96 +#define B1100001 97 +#define B01100001 97 +#define B1100010 98 +#define B01100010 98 +#define B1100011 99 +#define B01100011 99 +#define B1100100 100 +#define B01100100 100 +#define B1100101 101 +#define B01100101 101 +#define B1100110 102 +#define B01100110 102 +#define B1100111 103 +#define B01100111 103 +#define B1101000 104 +#define B01101000 104 +#define B1101001 105 +#define B01101001 105 +#define B1101010 106 +#define B01101010 106 +#define B1101011 107 +#define B01101011 107 +#define B1101100 108 +#define B01101100 108 +#define B1101101 109 +#define B01101101 109 +#define B1101110 110 +#define B01101110 110 +#define B1101111 111 +#define B01101111 111 +#define B1110000 112 +#define B01110000 112 +#define B1110001 113 +#define B01110001 113 +#define B1110010 114 +#define B01110010 114 +#define B1110011 115 +#define B01110011 115 +#define B1110100 116 +#define B01110100 116 +#define B1110101 117 +#define B01110101 117 +#define B1110110 118 +#define B01110110 118 +#define B1110111 119 +#define B01110111 119 +#define B1111000 120 +#define B01111000 120 +#define B1111001 121 +#define B01111001 121 +#define B1111010 122 +#define B01111010 122 +#define B1111011 123 +#define B01111011 123 +#define B1111100 124 +#define B01111100 124 +#define B1111101 125 +#define B01111101 125 +#define B1111110 126 +#define B01111110 126 +#define B1111111 127 +#define B01111111 127 +#define B10000000 128 +#define B10000001 129 +#define B10000010 130 +#define B10000011 131 +#define B10000100 132 +#define B10000101 133 +#define B10000110 134 +#define B10000111 135 +#define B10001000 136 +#define B10001001 137 +#define B10001010 138 +#define B10001011 139 +#define B10001100 140 +#define B10001101 141 +#define B10001110 142 +#define B10001111 143 +#define B10010000 144 +#define B10010001 145 +#define B10010010 146 +#define B10010011 147 +#define B10010100 148 +#define B10010101 149 +#define B10010110 150 +#define B10010111 151 +#define B10011000 152 +#define B10011001 153 +#define B10011010 154 +#define B10011011 155 +#define B10011100 156 +#define B10011101 157 +#define B10011110 158 +#define B10011111 159 +#define B10100000 160 +#define B10100001 161 +#define B10100010 162 +#define B10100011 163 +#define B10100100 164 +#define B10100101 165 +#define B10100110 166 +#define B10100111 167 +#define B10101000 168 +#define B10101001 169 +#define B10101010 170 +#define B10101011 171 +#define B10101100 172 +#define B10101101 173 +#define B10101110 174 +#define B10101111 175 +#define B10110000 176 +#define B10110001 177 +#define B10110010 178 +#define B10110011 179 +#define B10110100 180 +#define B10110101 181 +#define B10110110 182 +#define B10110111 183 +#define B10111000 184 +#define B10111001 185 +#define B10111010 186 +#define B10111011 187 +#define B10111100 188 +#define B10111101 189 +#define B10111110 190 +#define B10111111 191 +#define B11000000 192 +#define B11000001 193 +#define B11000010 194 +#define B11000011 195 +#define B11000100 196 +#define B11000101 197 +#define B11000110 198 +#define B11000111 199 +#define B11001000 200 +#define B11001001 201 +#define B11001010 202 +#define B11001011 203 +#define B11001100 204 +#define B11001101 205 +#define B11001110 206 +#define B11001111 207 +#define B11010000 208 +#define B11010001 209 +#define B11010010 210 +#define B11010011 211 +#define B11010100 212 +#define B11010101 213 +#define B11010110 214 +#define B11010111 215 +#define B11011000 216 +#define B11011001 217 +#define B11011010 218 +#define B11011011 219 +#define B11011100 220 +#define B11011101 221 +#define B11011110 222 +#define B11011111 223 +#define B11100000 224 +#define B11100001 225 +#define B11100010 226 +#define B11100011 227 +#define B11100100 228 +#define B11100101 229 +#define B11100110 230 +#define B11100111 231 +#define B11101000 232 +#define B11101001 233 +#define B11101010 234 +#define B11101011 235 +#define B11101100 236 +#define B11101101 237 +#define B11101110 238 +#define B11101111 239 +#define B11110000 240 +#define B11110001 241 +#define B11110010 242 +#define B11110011 243 +#define B11110100 244 +#define B11110101 245 +#define B11110110 246 +#define B11110111 247 +#define B11111000 248 +#define B11111001 249 +#define B11111010 250 +#define B11111011 251 +#define B11111100 252 +#define B11111101 253 +#define B11111110 254 +#define B11111111 255 + +#endif diff --git a/Marlin/Gen7/cores/arduino/main.cpp b/Marlin/Gen7/cores/arduino/main.cpp new file mode 100644 index 000000000..cc6e81d90 --- /dev/null +++ b/Marlin/Gen7/cores/arduino/main.cpp @@ -0,0 +1,14 @@ +#include + +int main(void) +{ + init(); + + setup(); + + for (;;) + loop(); + + return 0; +} + diff --git a/Marlin/Gen7/cores/arduino/main.cxx b/Marlin/Gen7/cores/arduino/main.cxx new file mode 100644 index 000000000..52351e4c9 --- /dev/null +++ b/Marlin/Gen7/cores/arduino/main.cxx @@ -0,0 +1,12 @@ +int main(void) +{ + init(); + + setup(); + + for (;;) + loop(); + + return 0; +} + diff --git a/Marlin/Gen7/cores/arduino/pins_arduino.c b/Marlin/Gen7/cores/arduino/pins_arduino.c new file mode 100644 index 000000000..ccb88fe98 --- /dev/null +++ b/Marlin/Gen7/cores/arduino/pins_arduino.c @@ -0,0 +1,200 @@ +/* + pins_arduino.c - pin definitions for the Arduino board + Part of Arduino / Wiring Lite + + Copyright (c) 2005 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: pins_arduino.c 254 2007-04-20 23:17:38Z mellis $ +*/ + +#include +#include "wiring_private.h" +#include "pins_arduino.h" + +// On the Sanguino board, digital pins are also used +// for the analog output (software PWM). Analog input +// pins are a separate set. + +// ATMEL ATMEGA644P / SANGUINO +// +// +---\/---+ +// INT0 (D 0) PB0 1| |40 PA0 (AI 0 / D31) +// INT1 (D 1) PB1 2| |39 PA1 (AI 1 / D30) +// INT2 (D 2) PB2 3| |38 PA2 (AI 2 / D29) +// PWM (D 3) PB3 4| |37 PA3 (AI 3 / D28) +// PWM (D 4) PB4 5| |36 PA4 (AI 4 / D27) +// MOSI (D 5) PB5 6| |35 PA5 (AI 5 / D26) +// MISO (D 6) PB6 7| |34 PA6 (AI 6 / D25) +// SCK (D 7) PB7 8| |33 PA7 (AI 7 / D24) +// RST 9| |32 AREF +// VCC 10| |31 GND +// GND 11| |30 AVCC +// XTAL2 12| |29 PC7 (D 23) +// XTAL1 13| |28 PC6 (D 22) +// RX0 (D 8) PD0 14| |27 PC5 (D 21) TDI +// TX0 (D 9) PD1 15| |26 PC4 (D 20) TDO +// RX1 (D 10) PD2 16| |25 PC3 (D 19) TMS +// TX1 (D 11) PD3 17| |24 PC2 (D 18) TCK +// PWM (D 12) PD4 18| |23 PC1 (D 17) SDA +// PWM (D 13) PD5 19| |22 PC0 (D 16) SCL +// PWM (D 14) PD6 20| |21 PD7 (D 15) PWM +// +--------+ +// + +#define PA 1 +#define PB 2 +#define PC 3 +#define PD 4 + +// these arrays map port names (e.g. port B) to the +// appropriate addresses for various functions (e.g. reading +// and writing) +const uint8_t PROGMEM port_to_mode_PGM[] = +{ + NOT_A_PORT, + &DDRA, + &DDRB, + &DDRC, + &DDRD, +}; + +const uint8_t PROGMEM port_to_output_PGM[] = +{ + NOT_A_PORT, + &PORTA, + &PORTB, + &PORTC, + &PORTD, +}; + +const uint8_t PROGMEM port_to_input_PGM[] = +{ + NOT_A_PORT, + &PINA, + &PINB, + &PINC, + &PIND, +}; + +const uint8_t PROGMEM digital_pin_to_port_PGM[] = +{ + PB, /* 0 */ + PB, + PB, + PB, + PB, + PB, + PB, + PB, + PD, /* 8 */ + PD, + PD, + PD, + PD, + PD, + PD, + PD, + PC, /* 16 */ + PC, + PC, + PC, + PC, + PC, + PC, + PC, + PA, /* 24 */ + PA, + PA, + PA, + PA, + PA, + PA, + PA /* 31 */ +}; + +const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = +{ + _BV(0), /* 0, port B */ + _BV(1), + _BV(2), + _BV(3), + _BV(4), + _BV(5), + _BV(6), + _BV(7), + _BV(0), /* 8, port D */ + _BV(1), + _BV(2), + _BV(3), + _BV(4), + _BV(5), + _BV(6), + _BV(7), + _BV(0), /* 16, port C */ + _BV(1), + _BV(2), + _BV(3), + _BV(4), + _BV(5), + _BV(6), + _BV(7), + _BV(7), /* 24, port A */ + _BV(6), + _BV(5), + _BV(4), + _BV(3), + _BV(2), + _BV(1), + _BV(0) +}; + +const uint8_t PROGMEM digital_pin_to_timer_PGM[] = +{ + NOT_ON_TIMER, /* 0 - PB0 */ + NOT_ON_TIMER, /* 1 - PB1 */ + NOT_ON_TIMER, /* 2 - PB2 */ + TIMER0A, /* 3 - PB3 */ + TIMER0B, /* 4 - PB4 */ + NOT_ON_TIMER, /* 5 - PB5 */ + NOT_ON_TIMER, /* 6 - PB6 */ + NOT_ON_TIMER, /* 7 - PB7 */ + NOT_ON_TIMER, /* 8 - PD0 */ + NOT_ON_TIMER, /* 9 - PD1 */ + NOT_ON_TIMER, /* 10 - PD2 */ + NOT_ON_TIMER, /* 11 - PD3 */ + TIMER1B, /* 12 - PD4 */ + TIMER1A, /* 13 - PD5 */ + TIMER2B, /* 14 - PD6 */ + TIMER2A, /* 15 - PD7 */ + NOT_ON_TIMER, /* 16 - PC0 */ + NOT_ON_TIMER, /* 17 - PC1 */ + NOT_ON_TIMER, /* 18 - PC2 */ + NOT_ON_TIMER, /* 19 - PC3 */ + NOT_ON_TIMER, /* 20 - PC4 */ + NOT_ON_TIMER, /* 21 - PC5 */ + NOT_ON_TIMER, /* 22 - PC6 */ + NOT_ON_TIMER, /* 23 - PC7 */ + NOT_ON_TIMER, /* 24 - PA0 */ + NOT_ON_TIMER, /* 25 - PA1 */ + NOT_ON_TIMER, /* 26 - PA2 */ + NOT_ON_TIMER, /* 27 - PA3 */ + NOT_ON_TIMER, /* 28 - PA4 */ + NOT_ON_TIMER, /* 29 - PA5 */ + NOT_ON_TIMER, /* 30 - PA6 */ + NOT_ON_TIMER /* 31 - PA7 */ +}; diff --git a/Marlin/Gen7/cores/arduino/pins_arduino.h b/Marlin/Gen7/cores/arduino/pins_arduino.h new file mode 100644 index 000000000..e0b7add86 --- /dev/null +++ b/Marlin/Gen7/cores/arduino/pins_arduino.h @@ -0,0 +1,65 @@ +/* + pins_arduino.h - Pin definition functions for Arduino + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2007 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ +*/ + +#ifndef Pins_Arduino_h +#define Pins_Arduino_h + +#include + +#define NOT_A_PIN 0 +#define NOT_A_PORT 0 + +#define NOT_ON_TIMER 0 +#define TIMER0A 1 +#define TIMER0B 2 +#define TIMER1A 3 +#define TIMER1B 4 +#define TIMER2 5 +#define TIMER2A 6 +#define TIMER2B 7 + +extern const uint8_t PROGMEM port_to_mode_PGM[]; +extern const uint8_t PROGMEM port_to_input_PGM[]; +extern const uint8_t PROGMEM port_to_output_PGM[]; + +extern const uint8_t PROGMEM digital_pin_to_port_PGM[]; +extern const uint8_t PROGMEM digital_pin_to_bit_PGM[]; +extern const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[]; + +extern const uint8_t PROGMEM digital_pin_to_timer_PGM[]; + +// Get the bit location within the hardware port of the given virtual pin. +// This comes from the pins_*.c file for the active board configuration. +// +// These perform slightly better as macros compared to inline functions +// +#define digitalPinToPort(P) ( pgm_read_byte( digital_pin_to_port_PGM + (P) ) ) +#define digitalPinToBitMask(P) ( pgm_read_byte( digital_pin_to_bit_mask_PGM + (P) ) ) +#define digitalPinToTimer(P) ( pgm_read_byte( digital_pin_to_timer_PGM + (P) ) ) +#define analogInPinToBit(P) (P) +#define portOutputRegister(P) ( (volatile uint8_t *)( pgm_read_byte( port_to_output_PGM + (P))) ) +#define portInputRegister(P) ( (volatile uint8_t *)( pgm_read_byte( port_to_input_PGM + (P))) ) +#define portModeRegister(P) ( (volatile uint8_t *)( pgm_read_byte( port_to_mode_PGM + (P))) ) + +#endif diff --git a/Marlin/Gen7/cores/arduino/wiring.c b/Marlin/Gen7/cores/arduino/wiring.c new file mode 100644 index 000000000..1a102ae0f --- /dev/null +++ b/Marlin/Gen7/cores/arduino/wiring.c @@ -0,0 +1,203 @@ +/* + wiring.c - Partial implementation of the Wiring API for the ATmega8. + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.c 388 2008-03-08 22:05:23Z mellis $ +*/ + +#include "wiring_private.h" + +volatile unsigned long timer0_overflow_count = 0; +volatile unsigned long timer0_clock_cycles = 0; +volatile unsigned long timer0_millis = 0; + +SIGNAL(TIMER0_OVF_vect) +{ + timer0_overflow_count++; + // timer 0 prescale factor is 64 and the timer overflows at 256 + timer0_clock_cycles += 64UL * 256UL; + while (timer0_clock_cycles > clockCyclesPerMicrosecond() * 1000UL) { + timer0_clock_cycles -= clockCyclesPerMicrosecond() * 1000UL; + timer0_millis++; + } +} + +unsigned long millis() +{ + unsigned long m; + uint8_t oldSREG = SREG; + + // disable interrupts while we read timer0_millis or we might get an + // inconsistent value (e.g. in the middle of the timer0_millis++) + cli(); + m = timer0_millis; + SREG = oldSREG; + + return m; +} + +unsigned long micros() { + unsigned long m, t; + uint8_t oldSREG = SREG; + + cli(); + t = TCNT0; + +#ifdef TIFR0 + if ((TIFR0 & _BV(TOV0)) && (t == 0)) + t = 256; +#else + if ((TIFR & _BV(TOV0)) && (t == 0)) + t = 256; +#endif + + m = timer0_overflow_count; + SREG = oldSREG; + + return ((m << 8) + t) * (64 / clockCyclesPerMicrosecond()); +} + +void delay(unsigned long ms) +{ + unsigned long start = millis(); + + while (millis() - start <= ms) + ; +} + +/* Delay for the given number of microseconds. Assumes a 8 or 16 MHz clock. + * Disables interrupts, which will disrupt the millis() function if used + * too frequently. */ +void delayMicroseconds(unsigned int us) +{ + uint8_t oldSREG; + + // calling avrlib's delay_us() function with low values (e.g. 1 or + // 2 microseconds) gives delays longer than desired. + //delay_us(us); + +#if F_CPU >= 16000000L + // for the 16 MHz clock on most Arduino boards + + // for a one-microsecond delay, simply return. the overhead + // of the function call yields a delay of approximately 1 1/8 us. + if (--us == 0) + return; + + // the following loop takes a quarter of a microsecond (4 cycles) + // per iteration, so execute it four times for each microsecond of + // delay requested. + us <<= 2; + + // account for the time taken in the preceeding commands. + us -= 2; +#else + // for the 8 MHz internal clock on the ATmega168 + + // for a one- or two-microsecond delay, simply return. the overhead of + // the function calls takes more than two microseconds. can't just + // subtract two, since us is unsigned; we'd overflow. + if (--us == 0) + return; + if (--us == 0) + return; + + // the following loop takes half of a microsecond (4 cycles) + // per iteration, so execute it twice for each microsecond of + // delay requested. + us <<= 1; + + // partially compensate for the time taken by the preceeding commands. + // we can't subtract any more than this or we'd overflow w/ small delays. + us--; +#endif + + // disable interrupts, otherwise the timer 0 overflow interrupt that + // tracks milliseconds will make us delay longer than we want. + oldSREG = SREG; + cli(); + + // busy wait + __asm__ __volatile__ ( + "1: sbiw %0,1" "\n\t" // 2 cycles + "brne 1b" : "=w" (us) : "0" (us) // 2 cycles + ); + + // reenable interrupts. + SREG = oldSREG; +} + +void init() +{ + // this needs to be called before setup() or some functions won't + // work there + sei(); + + // on the ATmega168, timer 0 is also used for fast hardware pwm + // (using phase-correct PWM would mean that timer 0 overflowed half as often + // resulting in different millis() behavior on the ATmega8 and ATmega168) + sbi(TCCR0A, WGM01); + sbi(TCCR0A, WGM00); + + // set timer 0 prescale factor to 64 + sbi(TCCR0B, CS01); + sbi(TCCR0B, CS00); + + // enable timer 0 overflow interrupt + sbi(TIMSK0, TOIE0); + + // timers 1 and 2 are used for phase-correct hardware pwm + // this is better for motors as it ensures an even waveform + // note, however, that fast pwm mode can achieve a frequency of up + // 8 MHz (with a 16 MHz clock) at 50% duty cycle + + // set timer 1 prescale factor to 64 + sbi(TCCR1B, CS11); + sbi(TCCR1B, CS10); + + // put timer 1 in 8-bit phase correct pwm mode + sbi(TCCR1A, WGM10); + + // set timer 2 prescale factor to 64 + sbi(TCCR2B, CS22); + + // configure timer 2 for phase correct pwm (8-bit) + sbi(TCCR2A, WGM20); + + // set a2d prescale factor to 128 + // 16 MHz / 128 = 125 KHz, inside the desired 50-200 KHz range. + // XXX: this will not work properly for other clock speeds, and + // this code should use F_CPU to determine the prescale factor. + sbi(ADCSRA, ADPS2); + sbi(ADCSRA, ADPS1); + sbi(ADCSRA, ADPS0); + + // enable a2d conversions + sbi(ADCSRA, ADEN); + + // the bootloader connects pins 0 and 1 to the USART; disconnect them + // here so they can be used as normal digital i/o; they will be + // reconnected in Serial.begin() + UCSR0B = 0; + #if defined(__AVR_ATmega644P__) + //TODO: test to see if disabling this helps? + //UCSR1B = 0; + #endif +} diff --git a/Marlin/Gen7/cores/arduino/wiring.h b/Marlin/Gen7/cores/arduino/wiring.h new file mode 100644 index 000000000..6309a364f --- /dev/null +++ b/Marlin/Gen7/cores/arduino/wiring.h @@ -0,0 +1,133 @@ +/* + wiring.h - Partial implementation of the Wiring API for the ATmega8. + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.h 387 2008-03-08 21:30:00Z mellis $ +*/ + +#ifndef Wiring_h +#define Wiring_h + +#include +#include "binary.h" + +#ifdef __cplusplus +extern "C"{ +#endif + +#define HIGH 0x1 +#define LOW 0x0 + +#define INPUT 0x0 +#define OUTPUT 0x1 + +#define true 0x1 +#define false 0x0 + +#define PI 3.14159265 +#define HALF_PI 1.57079 +#define TWO_PI 6.283185 +#define DEG_TO_RAD 0.01745329 +#define RAD_TO_DEG 57.2957786 + +#define SERIAL 0x0 +#define DISPLAY 0x1 + +#define LSBFIRST 0 +#define MSBFIRST 1 + +#define CHANGE 1 +#define FALLING 2 +#define RISING 3 + +#define INTERNAL 3 +#define DEFAULT 1 +#define EXTERNAL 0 + +// undefine stdlib's abs if encountered +#ifdef abs +#undef abs +#endif + +#define min(a,b) ((a)<(b)?(a):(b)) +#define max(a,b) ((a)>(b)?(a):(b)) +#define abs(x) ((x)>0?(x):-(x)) +#define constrain(amt,low,high) ((amt)<(low)?(low):((amt)>(high)?(high):(amt))) +#define round(x) ((x)>=0?(long)((x)+0.5):(long)((x)-0.5)) +#define radians(deg) ((deg)*DEG_TO_RAD) +#define degrees(rad) ((rad)*RAD_TO_DEG) +#define sq(x) ((x)*(x)) + +#define interrupts() sei() +#define noInterrupts() cli() + +#define clockCyclesPerMicrosecond() ( F_CPU / 1000000L ) +#define clockCyclesToMicroseconds(a) ( (a) / clockCyclesPerMicrosecond() ) +#define microsecondsToClockCycles(a) ( (a) * clockCyclesPerMicrosecond() ) + +#define lowByte(w) ((w) & 0xff) +#define highByte(w) ((w) >> 8) + +#define bitRead(value, bit) (((value) >> (bit)) & 0x01) +#define bitSet(value, bit) ((value) |= (1UL << (bit))) +#define bitClear(value, bit) ((value) &= ~(1UL << (bit))) +#define bitWrite(value, bit, bitvalue) (bitvalue ? bitSet(value, bit) : bitClear(value, bit)) + +typedef unsigned int word; + +#define bit(b) (1 << (b)) + +typedef uint8_t boolean; +typedef uint8_t byte; + +void init(void); + +void pinMode(uint8_t, uint8_t); +void digitalWrite(uint8_t, uint8_t); +int digitalRead(uint8_t); +int analogRead(uint8_t); +void analogReference(uint8_t mode); +void analogWrite(uint8_t, int); + +void beginSerial(uint8_t, long); +void serialWrite(uint8_t, unsigned char); +int serialAvailable(uint8_t); +int serialRead(uint8_t); +void serialFlush(uint8_t); + +unsigned long millis(void); +unsigned long micros(void); +void delay(unsigned long); +void delayMicroseconds(unsigned int us); +unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout); + +void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, byte val); + +void attachInterrupt(uint8_t, void (*)(void), int mode); +void detachInterrupt(uint8_t); + +void setup(void); +void loop(void); + +#ifdef __cplusplus +} // extern "C" +#endif + +#endif diff --git a/Marlin/Gen7/cores/arduino/wiring_analog.c b/Marlin/Gen7/cores/arduino/wiring_analog.c new file mode 100644 index 000000000..b98bb1a19 --- /dev/null +++ b/Marlin/Gen7/cores/arduino/wiring_analog.c @@ -0,0 +1,116 @@ +/* + wiring_analog.c - analog input and output + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $ +*/ + +#include "wiring_private.h" +#include "pins_arduino.h" + +uint8_t analog_reference = DEFAULT; + +void analogReference(uint8_t mode) +{ + // can't actually set the register here because the default setting + // will connect AVCC and the AREF pin, which would cause a short if + // there's something connected to AREF. + analog_reference = mode; +} + +int analogRead(uint8_t pin) +{ + uint8_t low, high, ch = analogInPinToBit(pin); + + // set the analog reference (high two bits of ADMUX) and select the + // channel (low 4 bits). this also sets ADLAR (left-adjust result) + // to 0 (the default). + // the final AND is to clear the pos/neg reference bits + ADMUX = ((analog_reference << 6) | (pin & 0x0f)) & B11000111; + + // without a delay, we seem to read from the wrong channel + //delay(1); + + // start the conversion + sbi(ADCSRA, ADSC); + + // ADSC is cleared when the conversion finishes + while (bit_is_set(ADCSRA, ADSC)); + + // we have to read ADCL first; doing so locks both ADCL + // and ADCH until ADCH is read. reading ADCL second would + // cause the results of each conversion to be discarded, + // as ADCL and ADCH would be locked when it completed. + low = ADCL; + high = ADCH; + + // combine the two bytes + return (high << 8) | low; +} + +// Right now, PWM output only works on the pins with +// hardware support. These are defined in the appropriate +// pins_*.c file. For the rest of the pins, we default +// to digital output. +void analogWrite(uint8_t pin, int val) +{ + // We need to make sure the PWM output is enabled for those pins + // that support it, as we turn it off when digitally reading or + // writing with them. Also, make sure the pin is in output mode + // for consistenty with Wiring, which doesn't require a pinMode + // call for the analog output pins. + pinMode(pin, OUTPUT); + + if (digitalPinToTimer(pin) == TIMER1A) { + // connect pwm to pin on timer 1, channel A + sbi(TCCR1A, COM1A1); + // set pwm duty + OCR1A = val; + } else if (digitalPinToTimer(pin) == TIMER1B) { + // connect pwm to pin on timer 1, channel B + sbi(TCCR1A, COM1B1); + // set pwm duty + OCR1B = val; + } else if (digitalPinToTimer(pin) == TIMER0A) { + // connect pwm to pin on timer 0, channel A + sbi(TCCR0A, COM0A1); + // set pwm duty + OCR0A = val; + } else if (digitalPinToTimer(pin) == TIMER0B) { + // connect pwm to pin on timer 0, channel B + sbi(TCCR0A, COM0B1); + // set pwm duty + OCR0B = val; + } else if (digitalPinToTimer(pin) == TIMER2A) { + // connect pwm to pin on timer 2, channel A + sbi(TCCR2A, COM2A1); + // set pwm duty + OCR2A = val; + } else if (digitalPinToTimer(pin) == TIMER2B) { + // connect pwm to pin on timer 2, channel B + sbi(TCCR2A, COM2B1); + // set pwm duty + OCR2B = val; + } else if (val < 128) + //fail semi-intelligently + digitalWrite(pin, LOW); + else + digitalWrite(pin, HIGH); +} diff --git a/Marlin/Gen7/cores/arduino/wiring_digital.c b/Marlin/Gen7/cores/arduino/wiring_digital.c new file mode 100644 index 000000000..3d4b4ebd1 --- /dev/null +++ b/Marlin/Gen7/cores/arduino/wiring_digital.c @@ -0,0 +1,95 @@ +/* + wiring_digital.c - digital input and output functions + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $ +*/ + +#include "wiring_private.h" +#include "pins_arduino.h" + +void pinMode(uint8_t pin, uint8_t mode) +{ + uint8_t bit = digitalPinToBitMask(pin); + uint8_t port = digitalPinToPort(pin); + volatile uint8_t *reg; + + if (port == NOT_A_PIN) return; + + // JWS: can I let the optimizer do this? + reg = portModeRegister(port); + + if (mode == INPUT) *reg &= ~bit; + else *reg |= bit; +} + +// Forcing this inline keeps the callers from having to push their own stuff +// on the stack. It is a good performance win and only takes 1 more byte per +// user than calling. (It will take more bytes on the 168.) +// +// But shouldn't this be moved into pinMode? Seems silly to check and do on +// each digitalread or write. +// +static inline void turnOffPWM(uint8_t timer) __attribute__ ((always_inline)); +static inline void turnOffPWM(uint8_t timer) +{ + if (timer == TIMER0A) cbi(TCCR0A, COM0A1); + if (timer == TIMER0B) cbi(TCCR0A, COM0B1); + if (timer == TIMER1A) cbi(TCCR1A, COM1A1); + if (timer == TIMER1B) cbi(TCCR1A, COM1B1); + if (timer == TIMER2A) cbi(TCCR2A, COM2A1); + if (timer == TIMER2B) cbi(TCCR2A, COM2B1); +} + +void digitalWrite(uint8_t pin, uint8_t val) +{ + uint8_t timer = digitalPinToTimer(pin); + uint8_t bit = digitalPinToBitMask(pin); + uint8_t port = digitalPinToPort(pin); + volatile uint8_t *out; + + if (port == NOT_A_PIN) return; + + // If the pin that support PWM output, we need to turn it off + // before doing a digital write. + if (timer != NOT_ON_TIMER) turnOffPWM(timer); + + out = portOutputRegister(port); + + if (val == LOW) *out &= ~bit; + else *out |= bit; +} + +int digitalRead(uint8_t pin) +{ + uint8_t timer = digitalPinToTimer(pin); + uint8_t bit = digitalPinToBitMask(pin); + uint8_t port = digitalPinToPort(pin); + + if (port == NOT_A_PIN) return LOW; + + // If the pin that support PWM output, we need to turn it off + // before getting a digital reading. + if (timer != NOT_ON_TIMER) turnOffPWM(timer); + + if (*portInputRegister(port) & bit) return HIGH; + + return LOW; +} diff --git a/Marlin/Gen7/cores/arduino/wiring_private.h b/Marlin/Gen7/cores/arduino/wiring_private.h new file mode 100644 index 000000000..14394a0b6 --- /dev/null +++ b/Marlin/Gen7/cores/arduino/wiring_private.h @@ -0,0 +1,60 @@ +/* + wiring_private.h - Internal header file. + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.h 239 2007-01-12 17:58:39Z mellis $ +*/ + +#ifndef WiringPrivate_h +#define WiringPrivate_h + +#include +#include +#include +#include +#include +#include + +#include "wiring.h" + +#ifdef __cplusplus +extern "C"{ +#endif + +#ifndef cbi +#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) +#endif +#ifndef sbi +#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) +#endif + +#define EXTERNAL_INT_0 0 +#define EXTERNAL_INT_1 1 +#define EXTERNAL_INT_2 2 + +#define EXTERNAL_NUM_INTERRUPTS 3 + +typedef void (*voidFuncPtr)(void); + +#ifdef __cplusplus +} // extern "C" +#endif + +#endif diff --git a/Marlin/Gen7/cores/arduino/wiring_pulse.c b/Marlin/Gen7/cores/arduino/wiring_pulse.c new file mode 100644 index 000000000..8f232f1d5 --- /dev/null +++ b/Marlin/Gen7/cores/arduino/wiring_pulse.c @@ -0,0 +1,66 @@ +/* + wiring_pulse.c - pulseIn() function + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $ +*/ + +#include "wiring_private.h" +#include "pins_arduino.h" + +/* Measures the length (in microseconds) of a pulse on the pin; state is HIGH + * or LOW, the type of pulse to measure. Works on pulses from 2-3 microseconds + * to 3 minutes in length, but must be called at least a few dozen microseconds + * before the start of the pulse. */ +unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout) +{ + // cache the port and bit of the pin in order to speed up the + // pulse width measuring loop and achieve finer resolution. calling + // digitalRead() instead yields much coarser resolution. + uint8_t bit = digitalPinToBitMask(pin); + uint8_t port = digitalPinToPort(pin); + uint8_t stateMask = (state ? bit : 0); + unsigned long width = 0; // keep initialization out of time critical area + + // convert the timeout from microseconds to a number of times through + // the initial loop; it takes 16 clock cycles per iteration. + unsigned long numloops = 0; + unsigned long maxloops = microsecondsToClockCycles(timeout) / 16; + + // wait for any previous pulse to end + while ((*portInputRegister(port) & bit) == stateMask) + if (numloops++ == maxloops) + return 0; + + // wait for the pulse to start + while ((*portInputRegister(port) & bit) != stateMask) + if (numloops++ == maxloops) + return 0; + + // wait for the pulse to stop + while ((*portInputRegister(port) & bit) == stateMask) + width++; + + // convert the reading to microseconds. The loop has been determined + // to be 10 clock cycles long and have about 16 clocks between the edge + // and the start of the loop. There will be some error introduced by + // the interrupt handlers. + return clockCyclesToMicroseconds(width * 10 + 16); +} diff --git a/Marlin/Gen7/cores/arduino/wiring_serial.c b/Marlin/Gen7/cores/arduino/wiring_serial.c new file mode 100644 index 000000000..a3314faa8 --- /dev/null +++ b/Marlin/Gen7/cores/arduino/wiring_serial.c @@ -0,0 +1,138 @@ +/* + wiring_serial.c - serial functions. + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + Modified 29 January 2009, Marius Kintel for Sanguino - http://www.sanguino.cc/ + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $ +*/ + + +#include "wiring_private.h" + +// Define constants and variables for buffering incoming serial data. We're +// using a ring buffer (I think), in which rx_buffer_head is the index of the +// location to which to write the next incoming character and rx_buffer_tail +// is the index of the location from which to read. +#define RX_BUFFER_SIZE 128 + +#if defined(__AVR_ATmega644P__) +unsigned char rx_buffer[2][RX_BUFFER_SIZE]; +int rx_buffer_head[2] = {0, 0}; +int rx_buffer_tail[2] = {0, 0}; +#else +unsigned char rx_buffer[1][RX_BUFFER_SIZE]; +int rx_buffer_head[1] = {0}; +int rx_buffer_tail[1] = {0}; +#endif + + +#define BEGIN_SERIAL(uart_, baud_) \ +{ \ + UBRR##uart_##H = ((F_CPU / 16 + baud / 2) / baud - 1) >> 8; \ + UBRR##uart_##L = ((F_CPU / 16 + baud / 2) / baud - 1); \ + \ + /* reset config for UART */ \ + UCSR##uart_##A = 0; \ + UCSR##uart_##B = 0; \ + UCSR##uart_##C = 0; \ + \ + /* enable rx and tx */ \ + sbi(UCSR##uart_##B, RXEN##uart_);\ + sbi(UCSR##uart_##B, TXEN##uart_);\ + \ + /* enable interrupt on complete reception of a byte */ \ + sbi(UCSR##uart_##B, RXCIE##uart_); \ + UCSR##uart_##C = _BV(UCSZ##uart_##1)|_BV(UCSZ##uart_##0); \ + /* defaults to 8-bit, no parity, 1 stop bit */ \ +} + +void beginSerial(uint8_t uart, long baud) +{ + if (uart == 0) BEGIN_SERIAL(0, baud) +#if defined(__AVR_ATmega644P__) + else BEGIN_SERIAL(1, baud) +#endif +} + +#define SERIAL_WRITE(uart_, c_) \ + while (!(UCSR##uart_##A & (1 << UDRE##uart_))) \ + ; \ + UDR##uart_ = c + +void serialWrite(uint8_t uart, unsigned char c) +{ + if (uart == 0) { + SERIAL_WRITE(0, c); + } +#if defined(__AVR_ATmega644P__) + else { + SERIAL_WRITE(1, c); + } +#endif +} + +int serialAvailable(uint8_t uart) +{ + return (RX_BUFFER_SIZE + rx_buffer_head[uart] - rx_buffer_tail[uart]) % RX_BUFFER_SIZE; +} + +int serialRead(uint8_t uart) +{ + // if the head isn't ahead of the tail, we don't have any characters + if (rx_buffer_head[uart] == rx_buffer_tail[uart]) { + return -1; + } else { + unsigned char c = rx_buffer[uart][rx_buffer_tail[uart]]; + rx_buffer_tail[uart] = (rx_buffer_tail[uart] + 1) % RX_BUFFER_SIZE; + return c; + } +} + +void serialFlush(uint8_t uart) +{ + // don't reverse this or there may be problems if the RX interrupt + // occurs after reading the value of rx_buffer_head but before writing + // the value to rx_buffer_tail; the previous value of rx_buffer_head + // may be written to rx_buffer_tail, making it appear as if the buffer + // were full, not empty. + rx_buffer_head[uart] = rx_buffer_tail[uart]; +} + +#define UART_ISR(uart_) \ +ISR(USART##uart_##_RX_vect) \ +{ \ + unsigned char c = UDR##uart_; \ + \ + int i = (rx_buffer_head[uart_] + 1) % RX_BUFFER_SIZE; \ + \ + /* if we should be storing the received character into the location \ + just before the tail (meaning that the head would advance to the \ + current location of the tail), we're about to overflow the buffer \ + and so we don't write the character or advance the head. */ \ + if (i != rx_buffer_tail[uart_]) { \ + rx_buffer[uart_][rx_buffer_head[uart_]] = c; \ + rx_buffer_head[uart_] = i; \ + } \ +} + +UART_ISR(0) +#if defined(__AVR_ATmega644P__) +UART_ISR(1) +#endif diff --git a/Marlin/Gen7/cores/arduino/wiring_shift.c b/Marlin/Gen7/cores/arduino/wiring_shift.c new file mode 100644 index 000000000..956f86429 --- /dev/null +++ b/Marlin/Gen7/cores/arduino/wiring_shift.c @@ -0,0 +1,40 @@ +/* + wiring_shift.c - shiftOut() function + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $ +*/ + +#include "wiring_private.h" + +void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, byte val) +{ + int i; + + for (i = 0; i < 8; i++) { + if (bitOrder == LSBFIRST) + digitalWrite(dataPin, !!(val & (1 << i))); + else + digitalWrite(dataPin, !!(val & (1 << (7 - i)))); + + digitalWrite(clockPin, HIGH); + digitalWrite(clockPin, LOW); + } +} diff --git a/Marlin/Marlin.pde b/Marlin/Marlin.pde index b122e58d8..b576ef7b8 100644 --- a/Marlin/Marlin.pde +++ b/Marlin/Marlin.pde @@ -226,11 +226,11 @@ void setup_photpin() void setup_powerhold() { #ifdef SUICIDE_PIN - #if (SUICIDE_PIN> -1) + #if (SUICIDE_PIN> -1) SET_OUTPUT(SUICIDE_PIN); WRITE(SUICIDE_PIN, HIGH); - #endif - #endif + #endif + #endif } void suicide() diff --git a/Marlin/fastio.h b/Marlin/fastio.h index 42f4ebb4f..cb4399a95 100644 --- a/Marlin/fastio.h +++ b/Marlin/fastio.h @@ -424,7 +424,7 @@ pins #define PD7_PWM NULL #endif /* _AVR_ATmega{168,328,328P}__ */ -#if defined (__AVR_ATmega644__) || defined (__AVR_ATmega644P__) || defined (__AVR_ATmega644PA__) +#if defined (__AVR_ATmega644__) || defined (__AVR_ATmega644P__) || defined (__AVR_ATmega644PA__) || defined (__AVR_ATmega1284P__) // UART #define RXD DIO8 #define TXD DIO9 diff --git a/Marlin/hardware/tools/avr/etc/avrdude.conf b/Marlin/hardware/tools/avr/etc/avrdude.conf new file mode 100644 index 000000000..ec921df42 --- /dev/null +++ b/Marlin/hardware/tools/avr/etc/avrdude.conf @@ -0,0 +1,12104 @@ +# $Id: avrdude.conf.in,v 1.122 2007/05/16 21:29:36 joerg_wunsch Exp $ +# +# AVRDUDE Configuration File +# +# This file contains configuration data used by AVRDUDE which describes +# the programming hardware pinouts and also provides part definitions. +# AVRDUDE's "-C" command line option specifies the location of the +# configuration file. The "-c" option names the programmer configuration +# which must match one of the entry's "id" parameter. The "-p" option +# identifies which part AVRDUDE is going to be programming and must match +# one of the parts' "id" parameter. +# +# Possible entry formats are: +# +# programmer +# id = [, [, ] ...] ; # are quoted strings +# desc = ; # quoted string +# type = par | stk500 | stk500v2 | stk500pp | stk500hvsp | stk500generic | +# avr910 | butterfly | usbasp | +# jtagmki | jtagmkii | jtagmkii_isp | jtagmkii_dw | +# dragon_dw | dragon_jtag | dragon_isp | dragon_pp | +# dragon_hvsp; # programmer type +# baudrate = ; # baudrate for avr910-programmer +# vcc = [, ... ] ; # pin number(s) +# reset = ; # pin number +# sck = ; # pin number +# mosi = ; # pin number +# miso = ; # pin number +# errled = ; # pin number +# rdyled = ; # pin number +# pgmled = ; # pin number +# vfyled = ; # pin number +# ; +# +# part +# id = ; # quoted string +# desc = ; # quoted string +# has_jtag = ; # part has JTAG i/f +# has_debugwire = ; # part has debugWire i/f +# devicecode = ; # deprecated, use stk500_devcode +# stk500_devcode = ; # numeric +# avr910_devcode = ; # numeric +# signature = ; # signature bytes +# chip_erase_delay = ; # micro-seconds +# reset = dedicated | io; +# retry_pulse = reset | sck; +# pgm_enable = ; +# chip_erase = ; +# chip_erase_delay = ; # chip erase delay (us) +# # STK500 parameters (parallel programming IO lines) +# pagel = ; # pin name in hex, i.e., 0xD7 +# bs2 = ; # pin name in hex, i.e., 0xA0 +# serial = ; # can use serial downloading +# parallel = ; # can use par. programming +# # STK500v2 parameters, to be taken from Atmel's XML files +# timeout = ; +# stabdelay = ; +# cmdexedelay = ; +# synchloops = ; +# bytedelay = ; +# pollvalue = ; +# pollindex = ; +# predelay = ; +# postdelay = ; +# pollmethod = ; +# mode = ; +# delay = ; +# blocksize = ; +# readsize = ; +# hvspcmdexedelay = ; +# # STK500v2 HV programming parameters, from XML +# pp_controlstack = , , ...; # PP only +# hvsp_controlstack = , , ...; # HVSP only +# hventerstabdelay = ; +# progmodedelay = ; # PP only +# latchcycles = ; +# togglevtg = ; +# poweroffdelay = ; +# resetdelayms = ; +# resetdelayus = ; +# hvleavestabdelay = ; +# resetdelay = ; +# synchcycles = ; # HVSP only +# chiperasepulsewidth = ; # PP only +# chiperasepolltimeout = ; +# chiperasetime = ; # HVSP only +# programfusepulsewidth = ; # PP only +# programfusepolltimeout = ; +# programlockpulsewidth = ; # PP only +# programlockpolltimeout = ; +# # JTAG ICE mkII parameters, also from XML files +# allowfullpagebitstream = ; +# enablepageprogramming = ; +# idr = ; # IO addr of IDR (OCD) reg. +# rampz = ; # IO addr of RAMPZ reg. +# spmcr = ; # mem addr of SPMC[S]R reg. +# eecr = ; # mem addr of EECR reg. +# # (only when != 0x3c) +# +# memory +# paged = ; # yes / no +# size = ; # bytes +# page_size = ; # bytes +# num_pages = ; # numeric +# min_write_delay = ; # micro-seconds +# max_write_delay = ; # micro-seconds +# readback_p1 = ; # byte value +# readback_p2 = ; # byte value +# pwroff_after_write = ; # yes / no +# read = ; +# write = ; +# read_lo = ; +# read_hi = ; +# write_lo = ; +# write_hi = ; +# loadpage_lo = ; +# loadpage_hi = ; +# writepage = ; +# ; +# ; +# +# If any of the above parameters are not specified, the default value +# of 0 is used for numerics or the empty string ("") for string +# values. If a required parameter is left empty, AVRDUDE will +# complain. +# +# NOTES: +# * 'devicecode' is the device code used by the STK500 (see codes +# listed below) +# * Not all memory types will implement all instructions. +# * AVR Fuse bits and Lock bits are implemented as a type of memory. +# * Example memory types are: +# "flash", "eeprom", "fuse", "lfuse" (low fuse), "hfuse" (high +# fuse), "signature", "calibration", "lock" +# * The memory type specified on the avrdude command line must match +# one of the memory types defined for the specified chip. +# * The pwroff_after_write flag causes avrdude to attempt to +# power the device off and back on after an unsuccessful write to +# the affected memory area if VCC programmer pins are defined. If +# VCC pins are not defined for the programmer, a message +# indicating that the device needs a power-cycle is printed out. +# This flag was added to work around a problem with the +# at90s4433/2333's; see the at90s4433 errata at: +# +# http://www.atmel.com/atmel/acrobat/doc1280.pdf +# +# INSTRUCTION FORMATS +# +# Instruction formats are specified as a comma seperated list of +# string values containing information (bit specifiers) about each +# of the 32 bits of the instruction. Bit specifiers may be one of +# the following formats: +# +# '1' = the bit is always set on input as well as output +# +# '0' = the bit is always clear on input as well as output +# +# 'x' = the bit is ignored on input and output +# +# 'a' = the bit is an address bit, the bit-number matches this bit +# specifier's position within the current instruction byte +# +# 'aN' = the bit is the Nth address bit, bit-number = N, i.e., a12 +# is address bit 12 on input, a0 is address bit 0. +# +# 'i' = the bit is an input data bit +# +# 'o' = the bit is an output data bit +# +# Each instruction must be composed of 32 bit specifiers. The +# instruction specification closely follows the instruction data +# provided in Atmel's data sheets for their parts. +# +# See below for some examples. +# +# +# The following are STK500 part device codes to use for the +# "devicecode" field of the part. These came from Atmel's software +# section avr061.zip which accompanies the application note +# AVR061 available from: +# +# http://www.atmel.com/atmel/acrobat/doc2525.pdf +# + +#define ATTINY10 0x10 +#define ATTINY11 0x11 +#define ATTINY12 0x12 +#define ATTINY15 0x13 +#define ATTINY13 0x14 + +#define ATTINY22 0x20 +#define ATTINY26 0x21 +#define ATTINY28 0x22 +#define ATTINY2313 0x23 + +#define AT90S1200 0x33 + +#define AT90S2313 0x40 +#define AT90S2323 0x41 +#define AT90S2333 0x42 +#define AT90S2343 0x43 + +#define AT90S4414 0x50 +#define AT90S4433 0x51 +#define AT90S4434 0x52 +#define ATMEGA48 0x59 + +#define AT90S8515 0x60 +#define AT90S8535 0x61 +#define AT90C8534 0x62 +#define ATMEGA8515 0x63 +#define ATMEGA8535 0x64 + +#define ATMEGA8 0x70 +#define ATMEGA88 0x73 +#define ATMEGA168 0x86 + +#define ATMEGA161 0x80 +#define ATMEGA163 0x81 +#define ATMEGA16 0x82 +#define ATMEGA162 0x83 +#define ATMEGA169 0x84 + +#define ATMEGA323 0x90 +#define ATMEGA32 0x91 + +#define ATMEGA64 0xA0 + +#define ATMEGA103 0xB1 +#define ATMEGA128 0xB2 +#define AT90CAN128 0xB3 + +#define AT86RF401 0xD0 + +#define AT89START 0xE0 +#define AT89S51 0xE0 +#define AT89S52 0xE1 + +# The following table lists the devices in the original AVR910 +# appnote: +# |Device |Signature | Code | +# +-------+----------+------+ +# |tiny12 | 1E 90 05 | 0x55 | +# |tiny15 | 1E 90 06 | 0x56 | +# | | | | +# | S1200 | 1E 90 01 | 0x13 | +# | | | | +# | S2313 | 1E 91 01 | 0x20 | +# | S2323 | 1E 91 02 | 0x48 | +# | S2333 | 1E 91 05 | 0x34 | +# | S2343 | 1E 91 03 | 0x4C | +# | | | | +# | S4414 | 1E 92 01 | 0x28 | +# | S4433 | 1E 92 03 | 0x30 | +# | S4434 | 1E 92 02 | 0x6C | +# | | | | +# | S8515 | 1E 93 01 | 0x38 | +# | S8535 | 1E 93 03 | 0x68 | +# | | | | +# |mega32 | 1E 95 01 | 0x72 | +# |mega83 | 1E 93 05 | 0x65 | +# |mega103| 1E 97 01 | 0x41 | +# |mega161| 1E 94 01 | 0x60 | +# |mega163| 1E 94 02 | 0x64 | + +# Appnote AVR109 also has a table of AVR910 device codes, which +# lists: +# dev avr910 signature +# ATmega8 0x77 0x1E 0x93 0x07 +# ATmega8515 0x3B 0x1E 0x93 0x06 +# ATmega8535 0x6A 0x1E 0x93 0x08 +# ATmega16 0x75 0x1E 0x94 0x03 +# ATmega162 0x63 0x1E 0x94 0x04 +# ATmega163 0x66 0x1E 0x94 0x02 +# ATmega169 0x79 0x1E 0x94 0x05 +# ATmega32 0x7F 0x1E 0x95 0x02 +# ATmega323 0x73 0x1E 0x95 0x01 +# ATmega64 0x46 0x1E 0x96 0x02 +# ATmega128 0x44 0x1E 0x97 0x02 +# +# These codes refer to "BOOT" device codes which are apparently +# different than standard device codes, for whatever reasons +# (often one above the standard code). + +# There are several extended versions of AVR910 implementations around +# in the Internet. These add the following codes (only devices that +# actually exist are listed): + +# ATmega8515 0x3A +# ATmega128 0x43 +# ATmega64 0x45 +# ATtiny26 0x5E +# ATmega8535 0x69 +# ATmega32 0x72 +# ATmega16 0x74 +# ATmega8 0x76 +# ATmega169 0x78 + +# +# Overall avrdude defaults +# +default_parallel = "lpt1"; +default_serial = "com1"; + + +# +# PROGRAMMER DEFINITIONS +# + +programmer + id = "avrisp"; + desc = "Atmel AVR ISP"; + type = stk500; +; + +programmer + id = "avrispv2"; + desc = "Atmel AVR ISP V2"; + type = stk500v2; +; + +programmer + id = "avrispmkII"; + desc = "Atmel AVR ISP mkII"; + type = stk500v2; +; + +programmer + id = "avrisp2"; + desc = "Atmel AVR ISP mkII"; + type = stk500v2; +; + +# This is supposed to be the "default" STK500 entry. +# Attempts to select the correct firmware version +# by probing for it. Better use one of the entries +# below instead. +programmer + id = "stk500"; + desc = "Atmel STK500"; + type = stk500generic; +; + +programmer + id = "stk500v1"; + desc = "Atmel STK500 Version 1.x firmware"; + type = stk500; +; + +programmer + id = "stk500v2"; + desc = "Atmel STK500 Version 2.x firmware"; + type = stk500v2; +; + +programmer + id = "stk500pp"; + desc = "Atmel STK500 V2 in parallel programming mode"; + type = stk500pp; +; + +programmer + id = "stk500hvsp"; + desc = "Atmel STK500 V2 in high-voltage serial programming mode"; + type = stk500hvsp; +; + +programmer + id = "avr910"; + desc = "Atmel Low Cost Serial Programmer"; + type = avr910; +; + +programmer + id = "usbasp"; + desc = "USBasp, http://www.fischl.de/usbasp/"; + type = usbasp; +; + +programmer + id = "usbtiny"; + desc = "USBtiny simple USB programmer"; + type = usbtiny; +; + +programmer + id = "butterfly"; + desc = "Atmel Butterfly Development Board"; + type = butterfly; +; + +programmer + id = "avr109"; + desc = "Atmel AppNote AVR109 Boot Loader"; + type = butterfly; +; + +programmer + id = "avr911"; + desc = "Atmel AppNote AVR911 AVROSP"; + type = butterfly; +; + +programmer + id = "jtagmkI"; + desc = "Atmel JTAG ICE (mkI)"; + baudrate = 115200; # default is 115200 + type = jtagmki; +; + +# easier to type +programmer + id = "jtag1"; + desc = "Atmel JTAG ICE (mkI)"; + baudrate = 115200; # default is 115200 + type = jtagmki; +; + +# easier to type +programmer + id = "jtag1slow"; + desc = "Atmel JTAG ICE (mkI)"; + baudrate = 19200; + type = jtagmki; +; + +programmer + id = "jtagmkII"; + desc = "Atmel JTAG ICE mkII"; + baudrate = 19200; # default is 19200 + type = jtagmkii; +; + +# easier to type +programmer + id = "jtag2slow"; + desc = "Atmel JTAG ICE mkII"; + baudrate = 19200; # default is 19200 + type = jtagmkii; +; + +# JTAG ICE mkII @ 115200 Bd +programmer + id = "jtag2fast"; + desc = "Atmel JTAG ICE mkII"; + baudrate = 115200; + type = jtagmkii; +; + +# make the fast one the default, people will love that +programmer + id = "jtag2"; + desc = "Atmel JTAG ICE mkII"; + baudrate = 115200; + type = jtagmkii; +; + +# JTAG ICE mkII in ISP mode +programmer + id = "jtag2isp"; + desc = "Atmel JTAG ICE mkII in ISP mode"; + baudrate = 115200; + type = jtagmkii_isp; +; + +# JTAG ICE mkII in debugWire mode +programmer + id = "jtag2dw"; + desc = "Atmel JTAG ICE mkII in debugWire mode"; + baudrate = 115200; + type = jtagmkii_dw; +; + +# AVR Dragon in JTAG mode +programmer + id = "dragon_jtag"; + desc = "Atmel AVR Dragon in JTAG mode"; + baudrate = 115200; + type = dragon_jtag; +; + +# AVR Dragon in ISP mode +programmer + id = "dragon_isp"; + desc = "Atmel AVR Dragon in ISP mode"; + baudrate = 115200; + type = dragon_isp; +; + +# AVR Dragon in PP mode +programmer + id = "dragon_pp"; + desc = "Atmel AVR Dragon in PP mode"; + baudrate = 115200; + type = dragon_pp; +; + +# AVR Dragon in HVSP mode +programmer + id = "dragon_hvsp"; + desc = "Atmel AVR Dragon in HVSP mode"; + baudrate = 115200; + type = dragon_hvsp; +; + +# AVR Dragon in debugWire mode +programmer + id = "dragon_dw"; + desc = "Atmel AVR Dragon in debugWire mode"; + baudrate = 115200; + type = dragon_dw; +; + +programmer + id = "pavr"; + desc = "Jason Kyle's pAVR Serial Programmer"; + type = avr910; +; + +# Parallel port programmers. + +programmer + id = "bsd"; + desc = "Brian Dean's Programmer, http://www.bsdhome.com/avrdude/"; + type = par; + vcc = 2, 3, 4, 5; + reset = 7; + sck = 8; + mosi = 9; + miso = 10; +; + +programmer + id = "stk200"; + desc = "STK200"; + type = par; + buff = 4, 5; + sck = 6; + mosi = 7; + reset = 9; + miso = 10; +; + +# The programming dongle used by the popular Ponyprog +# utility. It is almost similar to the STK200 one, +# except that there is a LED indicating that the +# programming is currently in progress. + +programmer + id = "pony-stk200"; + desc = "Pony Prog STK200"; + type = par; + buff = 4, 5; + sck = 6; + mosi = 7; + reset = 9; + miso = 10; + pgmled = 8; +; + +programmer + id = "dt006"; + desc = "Dontronics DT006"; + type = par; + reset = 4; + sck = 5; + mosi = 2; + miso = 11; +; + +programmer + id = "bascom"; + desc = "Bascom SAMPLE programming cable"; + type = par; + reset = 4; + sck = 5; + mosi = 2; + miso = 11; +; + +programmer + id = "alf"; + desc = "Nightshade ALF-PgmAVR, http://nightshade.homeip.net/"; + type = par; + vcc = 2, 3, 4, 5; + buff = 6; + reset = 7; + sck = 8; + mosi = 9; + miso = 10; + errled = 1; + rdyled = 14; + pgmled = 16; + vfyled = 17; +; + +programmer + id = "sp12"; + desc = "Steve Bolt's Programmer"; + type = par; + vcc = 4,5,6,7,8; + reset = 3; + sck = 2; + mosi = 9; + miso = 11; +; + +programmer + id = "picoweb"; + desc = "Picoweb Programming Cable, http://www.picoweb.net/"; + type = par; + reset = 2; + sck = 3; + mosi = 4; + miso = 13; +; + +programmer + id = "abcmini"; + desc = "ABCmini Board, aka Dick Smith HOTCHIP"; + type = par; + reset = 4; + sck = 3; + mosi = 2; + miso = 10; +; + +programmer + id = "futurlec"; + desc = "Futurlec.com programming cable."; + type = par; + reset = 3; + sck = 2; + mosi = 1; + miso = 10; +; + + +# From the contributor of the "xil" jtag cable: +# The "vcc" definition isn't really vcc (the cable gets its power from +# the programming circuit) but is necessary to switch one of the +# buffer lines (trying to add it to the "buff" lines doesn't work). +# With this, TMS connects to RESET, TDI to MOSI, TDO to MISO and TCK +# to SCK (plus vcc/gnd of course) +programmer + id = "xil"; + desc = "Xilinx JTAG cable"; + type = par; + mosi = 2; + sck = 3; + reset = 4; + buff = 5; + miso = 13; + vcc = 6; +; + + +programmer + id = "dapa"; + desc = "Direct AVR Parallel Access cable"; + type = par; + vcc = 3; + reset = 16; + sck = 1; + mosi = 2; + miso = 11; +; + +programmer + id = "atisp"; + desc = "AT-ISP V1.1 programming cable for AVR-SDK1 from micro-research.co.th"; + type = par; + reset = ~6; + sck = ~8; + mosi = ~7; + miso = ~10; +; + +programmer + id = "ere-isp-avr"; + desc = "ERE ISP-AVR "; + type = par; + reset = ~4; + sck = 3; + mosi = 2; + miso = 10; +; + +programmer + id = "blaster"; + desc = "Altera ByteBlaster"; + type = par; + sck = 2; + miso = 11; + reset = 3; + mosi = 8; + buff = 14; +; + +# It is almost same as pony-stk200, except vcc on pin 5 to auto +# disconnect port (download on http://electropol.free.fr) +programmer + id = "frank-stk200"; + desc = "Frank STK200"; + type = par; + vcc = 5; + sck = 6; + mosi = 7; + reset = 9; + miso = 10; + pgmled = 8; +; + + +# +# some ultra cheap programmers use bitbanging on the +# serialport. +# +# PC - DB9 - Pins for RS232: +# +# GND 5 -- |O +# | O| <- 9 RI +# DTR 4 <- |O | +# | O| <- 8 CTS +# TXD 3 <- |O | +# | O| -> 7 RTS +# RXD 2 -> |O | +# | O| <- 6 DSR +# DCD 1 -> |O +# +# Using RXD is currently not supported. +# Using RI is not supported under Win32 but is supported under Posix. + +# serial ponyprog design (dasa2 in uisp) +# reset=!txd sck=rts mosi=dtr miso=cts + +programmer + id = "ponyser"; + desc = "design ponyprog serial, reset=!txd sck=rts mosi=dtr miso=cts"; + type = serbb; + reset = ~3; + sck = 7; + mosi = 4; + miso = 8; +; + +# Same as above, different name +# reset=!txd sck=rts mosi=dtr miso=cts + +programmer + id = "siprog"; + desc = "Lancos SI-Prog "; + type = serbb; + reset = ~3; + sck = 7; + mosi = 4; + miso = 8; +; + +# unknown (dasa in uisp) +# reset=rts sck=dtr mosi=txd miso=cts + +programmer + id = "dasa"; + desc = "serial port banging, reset=rts sck=dtr mosi=txd miso=cts"; + type = serbb; + reset = 7; + sck = 4; + mosi = 3; + miso = 8; +; + +# unknown (dasa3 in uisp) +# reset=!dtr sck=rts mosi=txd miso=cts + +programmer + id = "dasa3"; + desc = "serial port banging, reset=!dtr sck=rts mosi=txd miso=cts"; + type = serbb; + reset = ~4; + sck = 7; + mosi = 3; + miso = 8; +; + +# +# PART DEFINITIONS +# + +#------------------------------------------------------------ +# ATtiny11 +#------------------------------------------------------------ + +# This is an HVSP-only device. + +part + id = "t11"; + desc = "ATtiny11"; + stk500_devcode = 0x11; + signature = 0x1e 0x90 0x04; + chip_erase_delay = 20000; + + timeout = 200; + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00, + 0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78, + 0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 50; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 64; + blocksize = 64; + readsize = 256; + delay = 5; + ; + + memory "flash" + size = 1024; + blocksize = 128; + readsize = 256; + delay = 3; + ; + + memory "signature" + size = 3; + ; + + memory "lock" + size = 1; + ; + + memory "calibration" + size = 1; + ; + + memory "fuse" + size = 1; + ; +; + +#------------------------------------------------------------ +# ATtiny12 +#------------------------------------------------------------ + +part + id = "t12"; + desc = "ATtiny12"; + stk500_devcode = 0x12; + avr910_devcode = 0x55; + signature = 0x1e 0x90 0x05; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00, + 0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78, + 0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 50; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 64; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 x x x x x x x x", + "x x a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 x x x x x x x x", + "x x a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 8; + blocksize = 64; + readsize = 256; + ; + + memory "flash" + size = 1024; + min_write_delay = 4500; + max_write_delay = 20000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 5; + blocksize = 128; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x o o x"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "fuse" + size = 1; + read = "0 1 0 1 0 0 0 0 x x x x x x x x", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 x x x x x", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; +; + +#------------------------------------------------------------ +# ATtiny13 +#------------------------------------------------------------ + +part + id = "t13"; + desc = "ATtiny13"; + has_debugwire = yes; + flash_instr = 0xB4, 0x0E, 0x1E; + eeprom_instr = 0xBB, 0xFE, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x0E, 0xB4, 0x0E, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; + stk500_devcode = 0x14; + signature = 0x1e 0x90 0x07; + chip_erase_delay = 4000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, + 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, + 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 90; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 64; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", + "x x a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", + "x x a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 5; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 1024; + page_size = 32; + num_pages = 32; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 0 0 0 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 0 0 0 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 0 0 0 a8", + " a7 a6 a5 a4 x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 2; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + ; + +; + + +#------------------------------------------------------------ +# ATtiny15 +#------------------------------------------------------------ + +part + id = "t15"; + desc = "ATtiny15"; + stk500_devcode = 0x13; + avr910_devcode = 0x56; + signature = 0x1e 0x90 0x06; + chip_erase_delay = 8200; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00, + 0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78, + 0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + hvspcmdexedelay = 5; + synchcycles = 6; + latchcycles = 16; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 50; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 64; + min_write_delay = 8200; + max_write_delay = 8200; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 x x x x x x x x", + "x x a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 x x x x x x x x", + "x x a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 10; + blocksize = 64; + readsize = 256; + ; + + memory "flash" + size = 1024; + min_write_delay = 4100; + max_write_delay = 4100; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 5; + blocksize = 128; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x o o x"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "fuse" + size = 1; + read = "0 1 0 1 0 0 0 0 x x x x x x x x", + "x x x x x x x x o o o o x x o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 x x x x x", + "x x x x x x x x i i i i 1 1 i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; +; + +#------------------------------------------------------------ +# AT90s1200 +#------------------------------------------------------------ + +part + id = "1200"; + desc = "AT90S1200"; + stk500_devcode = 0x33; + avr910_devcode = 0x13; + signature = 0x1e 0x90 0x01; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 1; + bytedelay = 0; + pollindex = 0; + pollvalue = 0xFF; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 1; + + memory "eeprom" + size = 64; + min_write_delay = 4000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 x x x x x x x x", + "x x a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 x x x x x x x x", + "x x a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 20; + blocksize = 32; + readsize = 256; + ; + memory "flash" + size = 1024; + min_write_delay = 4000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x02; + delay = 15; + blocksize = 128; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + ; + memory "lock" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + ; + ; + +#------------------------------------------------------------ +# AT90s4414 +#------------------------------------------------------------ + +part + id = "4414"; + desc = "AT90S4414"; + stk500_devcode = 0x50; + avr910_devcode = 0x28; + signature = 0x1e 0x92 0x01; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 1; + + memory "eeprom" + size = 256; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0x80; + readback_p2 = 0x7f; + read = " 1 0 1 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 64; + readsize = 256; + ; + memory "flash" + size = 4096; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0x7f; + readback_p2 = 0x7f; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 64; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + ; + +#------------------------------------------------------------ +# AT90s2313 +#------------------------------------------------------------ + +part + id = "2313"; + desc = "AT90S2313"; + stk500_devcode = 0x40; + avr910_devcode = 0x20; + signature = 0x1e 0x91 0x01; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 1; + + memory "eeprom" + size = 128; + min_write_delay = 4000; + max_write_delay = 9000; + readback_p1 = 0x80; + readback_p2 = 0x7f; + read = "1 0 1 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 64; + readsize = 256; + ; + memory "flash" + size = 2048; + min_write_delay = 4000; + max_write_delay = 9000; + readback_p1 = 0x7f; + readback_p2 = 0x7f; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x i i x", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + ; + +#------------------------------------------------------------ +# AT90s2333 +#------------------------------------------------------------ + +part + id = "2333"; +##### WARNING: No XML file for device 'AT90S2333'! ##### + desc = "AT90S2333"; + stk500_devcode = 0x42; + avr910_devcode = 0x34; + signature = 0x1e 0x91 0x05; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + memory "eeprom" + size = 128; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0x00; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + ; + memory "flash" + size = 2048; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + pwroff_after_write = yes; + read = "0 1 0 1 0 0 0 0 x x x x x x x x", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 i i i i i", + "x x x x x x x x x x x x x x x x"; + ; + memory "lock" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x o o x"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + ; + ; + +#------------------------------------------------------------ +# ATmega1284P +#------------------------------------------------------------ + +# similar to ATmega164p + +part + id = "m1284p"; + desc = "ATMEGA1284P"; + has_jtag = yes; + stk500_devcode = 0x82; # no STK500v1 support, use the ATmega16 one + avr910_devcode = 0x74; + signature = 0x1e 0x97 0x05; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 256; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90s2343 (also AT90s2323 and ATtiny22) +#------------------------------------------------------------ + +part + id = "2343"; + desc = "AT90S2343"; + stk500_devcode = 0x43; + avr910_devcode = 0x4c; + signature = 0x1e 0x91 0x03; + chip_erase_delay = 18000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00, + 0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78, + 0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 0; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 50; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 128; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0x00; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 64; + readsize = 256; + ; + memory "flash" + size = 2048; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 128; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x o o o x x x x o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 1 1 1 1 i", + "x x x x x x x x x x x x x x x x"; + ; + memory "lock" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x o o o x x x x o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + ; + ; + + +#------------------------------------------------------------ +# AT90s4433 +#------------------------------------------------------------ + +part + id = "4433"; + desc = "AT90S4433"; + stk500_devcode = 0x51; + avr910_devcode = 0x30; + signature = 0x1e 0x92 0x03; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 1; + + memory "eeprom" + size = 256; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0x00; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0 x x x x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0 x x x x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + memory "flash" + size = 4096; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + pwroff_after_write = yes; + read = "0 1 0 1 0 0 0 0 x x x x x x x x", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 i i i i i", + "x x x x x x x x x x x x x x x x"; + ; + memory "lock" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x o o x"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + ; + ; + +#------------------------------------------------------------ +# AT90s4434 +#------------------------------------------------------------ + +part + id = "4434"; +##### WARNING: No XML file for device 'AT90S4434'! ##### + desc = "AT90S4434"; + stk500_devcode = 0x52; + avr910_devcode = 0x6c; + signature = 0x1e 0x92 0x02; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + memory "eeprom" + size = 256; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0x00; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0 x x x x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0 x x x x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + ; + memory "flash" + size = 4096; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + read = "0 1 0 1 0 0 0 0 x x x x x x x x", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 i i i i i", + "x x x x x x x x x x x x x x x x"; + ; + memory "lock" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x o o x"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + ; + ; + +#------------------------------------------------------------ +# AT90s8515 +#------------------------------------------------------------ + +part + id = "8515"; + desc = "AT90S8515"; + stk500_devcode = 0x60; + avr910_devcode = 0x38; + signature = 0x1e 0x93 0x01; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 1; + + memory "eeprom" + size = 512; + min_write_delay = 4000; + max_write_delay = 9000; + readback_p1 = 0x80; + readback_p2 = 0x7f; + read = " 1 0 1 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + memory "flash" + size = 8192; + min_write_delay = 4000; + max_write_delay = 9000; + readback_p1 = 0x7f; + readback_p2 = 0x7f; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + ; + +#------------------------------------------------------------ +# AT90s8535 +#------------------------------------------------------------ + +part + id = "8535"; + desc = "AT90S8535"; + stk500_devcode = 0x61; + avr910_devcode = 0x68; + signature = 0x1e 0x93 0x03; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 1; + + memory "eeprom" + size = 512; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0x00; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + memory "flash" + size = 8192; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x x x o"; + write = "1 0 1 0 1 1 0 0 1 0 1 1 1 1 1 i", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x o o x x x x x x"; + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + ; + +#------------------------------------------------------------ +# ATmega103 +#------------------------------------------------------------ + +part + id = "m103"; + desc = "ATMEGA103"; + stk500_devcode = 0xB1; + avr910_devcode = 0x41; + signature = 0x1e 0x97 0x01; + chip_erase_delay = 112000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x8E, 0x9E, 0x2E, 0x3E, 0xAE, 0xBE, + 0x4E, 0x5E, 0xCE, 0xDE, 0x6E, 0x7E, 0xEE, 0xDE, + 0x66, 0x76, 0xE6, 0xF6, 0x6A, 0x7A, 0xEA, 0x7A, + 0x7F, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 10; + + memory "eeprom" + size = 4096; + min_write_delay = 4000; + max_write_delay = 9000; + readback_p1 = 0x80; + readback_p2 = 0x7f; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 64; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 22000; + max_write_delay = 56000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x11; + delay = 70; + blocksize = 256; + readsize = 256; + ; + + memory "fuse" + size = 1; + read = "0 1 0 1 0 0 0 0 x x x x x x x x", + "x x x x x x x x x x o x o 1 o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 1 i 1 i i", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x o o x"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATmega64 +#------------------------------------------------------------ + +part + id = "m64"; + desc = "ATMEGA64"; + has_jtag = yes; + stk500_devcode = 0xA0; + avr910_devcode = 0x45; + signature = 0x1e 0x96 0x02; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x22; + spmcr = 0x68; + allowfullpagebitstream = yes; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 20; + blocksize = 64; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 128; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 4; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + + + +#------------------------------------------------------------ +# ATmega128 +#------------------------------------------------------------ + +part + id = "m128"; + desc = "ATMEGA128"; + has_jtag = yes; + stk500_devcode = 0xB2; + avr910_devcode = 0x43; + signature = 0x1e 0x97 0x02; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x22; + spmcr = 0x68; + rampz = 0x3b; + allowfullpagebitstream = yes; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 64; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 128; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 4; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90CAN128 +#------------------------------------------------------------ + +part + id = "c128"; + desc = "AT90CAN128"; + has_jtag = yes; + stk500_devcode = 0xB3; +# avr910_devcode = 0x43; + signature = 0x1e 0x97 0x81; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + eecr = 0x3f; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATmega16 +#------------------------------------------------------------ + +part + id = "m16"; + desc = "ATMEGA16"; + has_jtag = yes; + stk500_devcode = 0x82; + avr910_devcode = 0x74; + signature = 0x1e 0x94 0x03; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 100; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = yes; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 512; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x04; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 128; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "calibration" + size = 4; + + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATmega164P +#------------------------------------------------------------ + +# close to ATmega16 + +part + id = "m164p"; + desc = "ATMEGA164P"; + has_jtag = yes; +# stk500_devcode = 0x82; # no STK500v1 support +# avr910_devcode = 0x?; # try the ATmega16 one:^ + avr910_devcode = 0x74; + signature = 0x1e 0x94 0x0a; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 512; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 128; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATmega324P +#------------------------------------------------------------ + +# similar to ATmega164P + +part + id = "m324p"; + desc = "ATMEGA324P"; + has_jtag = yes; +# stk500_devcode = 0x82; # no STK500v1 support +# avr910_devcode = 0x?; # try the ATmega16 one:^ + avr910_devcode = 0x74; + signature = 0x1e 0x95 0x08; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATmega644 +#------------------------------------------------------------ + +# similar to ATmega164 + +part + id = "m644"; + desc = "ATMEGA644"; + has_jtag = yes; +# stk500_devcode = 0x82; # no STK500v1 support +# avr910_devcode = 0x?; # try the ATmega16 one:^ + avr910_devcode = 0x74; + signature = 0x1e 0x96 0x09; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega644P +#------------------------------------------------------------ + +# similar to ATmega164p + +part + id = "m644p"; + desc = "ATMEGA644P"; + has_jtag = yes; +# stk500_devcode = 0x82; # no STK500v1 support +# avr910_devcode = 0x?; # try the ATmega16 one:^ + avr910_devcode = 0x74; + signature = 0x1e 0x96 0x0a; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + + + +#------------------------------------------------------------ +# ATmega162 +#------------------------------------------------------------ + +part + id = "m162"; + desc = "ATMEGA162"; + has_jtag = yes; + stk500_devcode = 0x83; + avr910_devcode = 0x63; + signature = 0x1e 0x94 0x04; + chip_erase_delay = 9000; + pagel = 0xd7; + bs2 = 0xa0; + + idr = 0x04; + spmcr = 0x57; + allowfullpagebitstream = yes; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + + ; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 512; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 4; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 16000; + max_write_delay = 16000; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 16000; + max_write_delay = 16000; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 16000; + max_write_delay = 16000; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x 1 1 1 1 1 i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 16000; + max_write_delay = 16000; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + + read = "0 0 1 1 0 0 0 0 0 0 x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; +; + + + +#------------------------------------------------------------ +# ATmega163 +#------------------------------------------------------------ + +part + id = "m163"; + desc = "ATMEGA163"; + stk500_devcode = 0x81; + avr910_devcode = 0x64; + signature = 0x1e 0x94 0x02; + chip_erase_delay = 32000; + pagel = 0xd7; + bs2 = 0xa0; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 30; + programfusepulsewidth = 0; + programfusepolltimeout = 2; + programlockpulsewidth = 0; + programlockpolltimeout = 2; + + + memory "eeprom" + size = 512; + min_write_delay = 4000; + max_write_delay = 4000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + ; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 16000; + max_write_delay = 16000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 128; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o x x o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i 1 1 i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x 1 o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x 1 1 1 1 1 i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x 0 x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega169 +#------------------------------------------------------------ + +part + id = "m169"; + desc = "ATMEGA169"; + has_jtag = yes; + stk500_devcode = 0x85; + avr910_devcode = 0x78; + signature = 0x1e 0x94 0x05; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 512; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 128; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + ; + + memory "lock" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega329 +#------------------------------------------------------------ + +part + id = "m329"; + desc = "ATMEGA329"; + has_jtag = yes; +# stk500_devcode = 0x85; # no STK500 support, only STK500v2 +# avr910_devcode = 0x?; # try the ATmega169 one: + avr910_devcode = 0x75; + signature = 0x1e 0x95 0x03; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega3290 +#------------------------------------------------------------ + +# identical to ATmega329 + +part + id = "m3290"; + desc = "ATMEGA3290"; + has_jtag = yes; +# stk500_devcode = 0x85; # no STK500 support, only STK500v2 +# avr910_devcode = 0x?; # try the ATmega169 one: + avr910_devcode = 0x75; + signature = 0x1e 0x95 0x04; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a3 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega649 +#------------------------------------------------------------ + +part + id = "m649"; + desc = "ATMEGA649"; + has_jtag = yes; +# stk500_devcode = 0x85; # no STK500 support, only STK500v2 +# avr910_devcode = 0x?; # try the ATmega169 one: + avr910_devcode = 0x75; + signature = 0x1e 0x96 0x03; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega6490 +#------------------------------------------------------------ + +# identical to ATmega649 + +part + id = "m6490"; + desc = "ATMEGA6490"; + has_jtag = yes; +# stk500_devcode = 0x85; # no STK500 support, only STK500v2 +# avr910_devcode = 0x?; # try the ATmega169 one: + avr910_devcode = 0x75; + signature = 0x1e 0x96 0x04; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega32 +#------------------------------------------------------------ + +part + id = "m32"; + desc = "ATMEGA32"; + has_jtag = yes; + stk500_devcode = 0x91; + avr910_devcode = 0x72; + signature = 0x1e 0x95 0x02; + chip_erase_delay = 9000; + pagel = 0xd7; + bs2 = 0xa0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = yes; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x04; + delay = 10; + blocksize = 64; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 4; + read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega161 +#------------------------------------------------------------ + +part + id = "m161"; + desc = "ATMEGA161"; + stk500_devcode = 0x80; + avr910_devcode = 0x60; + signature = 0x1e 0x94 0x01; + chip_erase_delay = 28000; + pagel = 0xd7; + bs2 = 0xa0; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 30; + programfusepulsewidth = 0; + programfusepolltimeout = 2; + programlockpulsewidth = 0; + programlockpolltimeout = 2; + + memory "eeprom" + size = 512; + min_write_delay = 3400; + max_write_delay = 3400; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 5; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 14000; + max_write_delay = 14000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 16; + blocksize = 128; + readsize = 256; + ; + + memory "fuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 0 0 0 0 x x x x x x x x", + "x x x x x x x x x o x o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 x x x x x", + "x x x x x x x x 1 i 1 i i i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATmega8 +#------------------------------------------------------------ + +part + id = "m8"; + desc = "ATMEGA8"; + stk500_devcode = 0x70; + avr910_devcode = 0x76; + signature = 0x1e 0x93 0x07; + pagel = 0xd7; + bs2 = 0xc2; + chip_erase_delay = 10000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 2; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 512; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 20; + blocksize = 128; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 0 x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 0 x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 10; + blocksize = 64; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 4; + read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + + +#------------------------------------------------------------ +# ATmega8515 +#------------------------------------------------------------ + +part + id = "m8515"; + desc = "ATMEGA8515"; + stk500_devcode = 0x63; + avr910_devcode = 0x3A; + signature = 0x1e 0x93 0x06; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 512; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 10; + blocksize = 128; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 0 x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 0 x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 4; + read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + + + +#------------------------------------------------------------ +# ATmega8535 +#------------------------------------------------------------ + +part + id = "m8535"; + desc = "ATMEGA8535"; + stk500_devcode = 0x64; + avr910_devcode = 0x69; + signature = 0x1e 0x93 0x08; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 512; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 10; + blocksize = 128; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 0 x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 0 x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 4; + read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATtiny26 +#------------------------------------------------------------ + +part + id = "t26"; + desc = "ATTINY26"; + stk500_devcode = 0x21; + avr910_devcode = 0x5e; + signature = 0x1e 0x91 0x09; + pagel = 0xb3; + bs2 = 0xb2; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0xC4, 0xE4, 0xC4, 0xE4, 0xCC, 0xEC, 0xCC, 0xEC, + 0xD4, 0xF4, 0xD4, 0xF4, 0xDC, 0xFC, 0xDC, 0xFC, + 0xC8, 0xE8, 0xD8, 0xF8, 0x4C, 0x6C, 0x5C, 0x7C, + 0xEC, 0xBC, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 2; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 128; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 10; + blocksize = 64; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 2048; + page_size = 32; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 16; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x x o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 1 i i", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x x x x i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 4; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + +; + + +#------------------------------------------------------------ +# ATtiny261 +#------------------------------------------------------------ +# Close to ATtiny26 + +part + id = "t261"; + desc = "ATTINY261"; + has_debugwire = yes; + flash_instr = 0xB4, 0x00, 0x10; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x00, 0xB4, 0x00, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +# stk500_devcode = 0x21; +# avr910_devcode = 0x5e; + signature = 0x1e 0x91 0x0c; + pagel = 0xb3; + bs2 = 0xb2; + chip_erase_delay = 4000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0xC4, 0xE4, 0xC4, 0xE4, 0xCC, 0xEC, 0xCC, 0xEC, + 0xD4, 0xF4, 0xD4, 0xF4, 0xDC, 0xFC, 0xDC, 0xFC, + 0xC8, 0xE8, 0xD8, 0xF8, 0x4C, 0x6C, 0x5C, 0x7C, + 0xEC, 0xBC, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 2; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + size = 128; + page_size = 4; + num_pages = 32; + min_write_delay = 4000; + max_write_delay = 4000; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read = "1 0 1 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 2048; + page_size = 32; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x x o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 1 i i", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x x x o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + +; + + +#------------------------------------------------------------ +# ATtiny461 +#------------------------------------------------------------ +# Close to ATtiny261 + +part + id = "t461"; + desc = "ATTINY461"; + has_debugwire = yes; + flash_instr = 0xB4, 0x00, 0x10; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x00, 0xB4, 0x00, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +# stk500_devcode = 0x21; +# avr910_devcode = 0x5e; + signature = 0x1e 0x92 0x08; + pagel = 0xb3; + bs2 = 0xb2; + chip_erase_delay = 4000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0xC4, 0xE4, 0xC4, 0xE4, 0xCC, 0xEC, 0xCC, 0xEC, + 0xD4, 0xF4, 0xD4, 0xF4, 0xDC, 0xFC, 0xDC, 0xFC, + 0xC8, 0xE8, 0xD8, 0xF8, 0x4C, 0x6C, 0x5C, 0x7C, + 0xEC, 0xBC, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 2; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + size = 256; + page_size = 4; + num_pages = 64; + min_write_delay = 4000; + max_write_delay = 4000; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read = " 1 0 1 0 0 0 0 0 x x x x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0 x x x x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 4096; + page_size = 64; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x x o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 1 i i", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x x x o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + +; + + +#------------------------------------------------------------ +# ATtiny861 +#------------------------------------------------------------ +# Close to ATtiny461 + +part + id = "t861"; + desc = "ATTINY861"; + has_debugwire = yes; + flash_instr = 0xB4, 0x00, 0x10; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x00, 0xB4, 0x00, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +# stk500_devcode = 0x21; +# avr910_devcode = 0x5e; + signature = 0x1e 0x93 0x0d; + pagel = 0xb3; + bs2 = 0xb2; + chip_erase_delay = 4000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0xC4, 0xE4, 0xC4, 0xE4, 0xCC, 0xEC, 0xCC, 0xEC, + 0xD4, 0xF4, 0xD4, 0xF4, 0xDC, 0xFC, 0xDC, 0xFC, + 0xC8, 0xE8, 0xD8, 0xF8, 0x4C, 0x6C, 0x5C, 0x7C, + 0xEC, 0xBC, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 2; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + size = 512; + num_pages = 128; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4000; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read = " 1 0 1 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x x o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 1 i i", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x x x o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + +; + + +#------------------------------------------------------------ +# ATmega48 +#------------------------------------------------------------ + +part + id = "m48"; + desc = "ATMEGA48"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x59; +# avr910_devcode = 0x; + signature = 0x1e 0x92 0x05; + pagel = 0xd7; + bs2 = 0xc2; + chip_erase_delay = 45000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + page_size = 4; + size = 256; + min_write_delay = 3600; + max_write_delay = 3600; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 x x x x x", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 5; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 4096; + page_size = 64; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x x x o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATmega88 +#------------------------------------------------------------ + +part + id = "m88"; + desc = "ATMEGA88"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x73; +# avr910_devcode = 0x; + signature = 0x1e 0x93 0x0a; + pagel = 0xd7; + bs2 = 0xc2; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + page_size = 4; + size = 512; + min_write_delay = 3600; + max_write_delay = 3600; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 5; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega168 +#------------------------------------------------------------ + +part + id = "m168"; + desc = "ATMEGA168"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x86; + # avr910_devcode = 0x; + signature = 0x1e 0x94 0x06; + pagel = 0xd7; + bs2 = 0xc2; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + page_size = 4; + size = 512; + min_write_delay = 3600; + max_write_delay = 3600; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 5; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 128; + readsize = 256; + + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; +; + +#------------------------------------------------------------ +# ATmega328 +#------------------------------------------------------------ + +part + id = "m328p"; + desc = "ATMEGA328P"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x86; + # avr910_devcode = 0x; + signature = 0x1e 0x95 0x0F; + pagel = 0xd7; + bs2 = 0xc2; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + page_size = 4; + size = 1024; + min_write_delay = 3600; + max_write_delay = 3600; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 5; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 128; + readsize = 256; + + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; +; + +#------------------------------------------------------------ +# ATtiny2313 +#------------------------------------------------------------ + +part + id = "t2313"; + desc = "ATtiny2313"; + has_debugwire = yes; + flash_instr = 0xB2, 0x0F, 0x1F; + eeprom_instr = 0xBB, 0xFE, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBA, 0x0F, 0xB2, 0x0F, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; + stk500_devcode = 0x23; +## Use the ATtiny26 devcode: + avr910_devcode = 0x5e; + signature = 0x1e 0x91 0x0a; + pagel = 0xD4; + bs2 = 0xD6; + reset = io; + chip_erase_delay = 9000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0E, 0x1E, 0x2E, 0x3E, 0x2E, 0x3E, + 0x4E, 0x5E, 0x4E, 0x5E, 0x6E, 0x7E, 0x6E, 0x7E, + 0x26, 0x36, 0x66, 0x76, 0x2A, 0x3A, 0x6A, 0x7A, + 0x2E, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 128; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 2048; + page_size = 32; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + +# The information in the data sheet of April/2004 is wrong, this works: + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + +# The information in the data sheet of April/2004 is wrong, this works: + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + +# The information in the data sheet of April/2004 is wrong, this works: + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; +# ATtiny2313 has Signature Bytes: 0x1E 0x91 0x0A. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; +# The Tiny2313 has calibration data for both 4 MHz and 8 MHz. +# The information in the data sheet of April/2004 is wrong, this works: + + memory "calibration" + size = 2; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90PWM2 +#------------------------------------------------------------ + +part + id = "pwm2"; + desc = "AT90PWM2"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x65; +## avr910_devcode = ?; + signature = 0x1e 0x93 0x81; + pagel = 0xD8; + bs2 = 0xE2; + reset = io; + chip_erase_delay = 9000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 512; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; +# AT90PWM2 has Signature Bytes: 0x1E 0x93 0x81. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90PWM3 +#------------------------------------------------------------ + +# Completely identical to AT90PWM2 (including the signature!) + +part + id = "pwm3"; + desc = "AT90PWM3"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x65; +## avr910_devcode = ?; + signature = 0x1e 0x93 0x81; + pagel = 0xD8; + bs2 = 0xE2; + reset = io; + chip_erase_delay = 9000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 512; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; +# AT90PWM2 has Signature Bytes: 0x1E 0x93 0x81. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90PWM2B +#------------------------------------------------------------ +# Same as AT90PWM2 but different signature. + +part + id = "pwm2b"; + desc = "AT90PWM2B"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x65; +## avr910_devcode = ?; + signature = 0x1e 0x93 0x83; + pagel = 0xD8; + bs2 = 0xE2; + reset = io; + chip_erase_delay = 9000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 512; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90PWM3B +#------------------------------------------------------------ + +# Completely identical to AT90PWM2B (including the signature!) + +part + id = "pwm3b"; + desc = "AT90PWM3B"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x65; +## avr910_devcode = ?; + signature = 0x1e 0x93 0x83; + pagel = 0xD8; + bs2 = 0xE2; + reset = io; + chip_erase_delay = 9000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 512; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATtiny25 +#------------------------------------------------------------ + +part + id = "t25"; + desc = "ATtiny25"; + has_debugwire = yes; + flash_instr = 0xB4, 0x02, 0x12; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x02, 0xB4, 0x02, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +## no STK500 devcode in XML file, use the ATtiny45 one + stk500_devcode = 0x14; +## avr910_devcode = ?; +## Try the AT90S2313 devcode: + avr910_devcode = 0x20; + signature = 0x1e 0x91 0x08; + reset = io; + chip_erase_delay = 4500; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, + 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, + 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 128; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 2048; + page_size = 32; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; +# ATtiny25 has Signature Bytes: 0x1E 0x91 0x08. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 2; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATtiny45 +#------------------------------------------------------------ + +part + id = "t45"; + desc = "ATtiny45"; + has_debugwire = yes; + flash_instr = 0xB4, 0x02, 0x12; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x02, 0xB4, 0x02, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; + stk500_devcode = 0x14; +## avr910_devcode = ?; +## Try the AT90S2313 devcode: + avr910_devcode = 0x20; + signature = 0x1e 0x92 0x06; + reset = io; + chip_erase_delay = 4500; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, + 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, + 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 256; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 4096; + page_size = 64; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; +# ATtiny45 has Signature Bytes: 0x1E 0x92 0x08. (Data sheet 2586C-AVR-06/05 (doc2586.pdf) indicates otherwise!) + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 2; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATtiny85 +#------------------------------------------------------------ + +part + id = "t85"; + desc = "ATtiny85"; + has_debugwire = yes; + flash_instr = 0xB4, 0x02, 0x12; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x02, 0xB4, 0x02, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +## no STK500 devcode in XML file, use the ATtiny45 one + stk500_devcode = 0x14; +## avr910_devcode = ?; +## Try the AT90S2313 devcode: + avr910_devcode = 0x20; + signature = 0x1e 0x93 0x0b; + reset = io; + chip_erase_delay = 4500; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, + 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, + 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 512; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", + "a8 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; +# ATtiny85 has Signature Bytes: 0x1E 0x93 0x08. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 2; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega640 +#------------------------------------------------------------ +# Almost same as ATmega1280, except for different memory sizes + +part + id = "m640"; + desc = "ATMEGA640"; + signature = 0x1e 0x96 0x08; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega1280 +#------------------------------------------------------------ + +part + id = "m1280"; + desc = "ATMEGA1280"; + signature = 0x1e 0x97 0x03; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega1281 +#------------------------------------------------------------ +# Identical to ATmega1280 + +part + id = "m1281"; + desc = "ATMEGA1281"; + signature = 0x1e 0x97 0x04; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega2560 +#------------------------------------------------------------ + +part + id = "m2560"; + desc = "ATMEGA2560"; + signature = 0x1e 0x98 0x01; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 262144; + page_size = 256; + num_pages = 1024; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + load_ext_addr = " 0 1 0 0 1 1 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 0 a16", + " 0 0 0 0 0 0 0 0"; + + mode = 0x41; + delay = 10; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega2561 +#------------------------------------------------------------ + +part + id = "m2561"; + desc = "ATMEGA2561"; + signature = 0x1e 0x98 0x02; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 262144; + page_size = 256; + num_pages = 1024; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + load_ext_addr = " 0 1 0 0 1 1 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 0 a16", + " 0 0 0 0 0 0 0 0"; + + mode = 0x41; + delay = 10; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATtiny24 +#------------------------------------------------------------ + +part + id = "t24"; + desc = "ATtiny24"; + has_debugwire = yes; + flash_instr = 0xB4, 0x07, 0x17; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x07, 0xB4, 0x07, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +## no STK500 devcode in XML file, use the ATtiny45 one + stk500_devcode = 0x14; +## avr910_devcode = ?; +## Try the AT90S2313 devcode: + avr910_devcode = 0x20; + signature = 0x1e 0x91 0x0b; + reset = io; + chip_erase_delay = 4500; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, + 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, + 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x0F; + hventerstabdelay = 100; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 70; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 128; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 2048; + page_size = 32; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; +# ATtiny24 has Signature Bytes: 0x1E 0x91 0x0B. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x x x x x x x i i"; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATtiny44 +#------------------------------------------------------------ + +part + id = "t44"; + desc = "ATtiny44"; + has_debugwire = yes; + flash_instr = 0xB4, 0x07, 0x17; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x07, 0xB4, 0x07, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +## no STK500 devcode in XML file, use the ATtiny45 one + stk500_devcode = 0x14; +## avr910_devcode = ?; +## Try the AT90S2313 devcode: + avr910_devcode = 0x20; + signature = 0x1e 0x92 0x07; + reset = io; + chip_erase_delay = 4500; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, + 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, + 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x0F; + hventerstabdelay = 100; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 70; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 256; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 4096; + page_size = 64; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; +# ATtiny44 has Signature Bytes: 0x1E 0x92 0x07. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x x x x x x x i i"; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATtiny84 +#------------------------------------------------------------ + +part + id = "t84"; + desc = "ATtiny84"; + has_debugwire = yes; + flash_instr = 0xB4, 0x07, 0x17; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x07, 0xB4, 0x07, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +## no STK500 devcode in XML file, use the ATtiny45 one + stk500_devcode = 0x14; +## avr910_devcode = ?; +## Try the AT90S2313 devcode: + avr910_devcode = 0x20; + signature = 0x1e 0x93 0x0c; + reset = io; + chip_erase_delay = 4500; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, + 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, + 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x0F; + hventerstabdelay = 100; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 70; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 512; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", + "a8 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; +# ATtiny84 has Signature Bytes: 0x1E 0x93 0x0C. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x x x x x x x i i"; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90USB646 +#------------------------------------------------------------ + +part + id = "usb646"; + desc = "AT90USB646"; +# signature = 0x1e 0x96 0x82; ? + signature = 0x1e 0x97 0x82; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90USB647 +#------------------------------------------------------------ +# identical to AT90USB646 + +part + id = "usb647"; + desc = "AT90USB647"; +# signature = 0x1e 0x96 0x82; ? + signature = 0x1e 0x97 0x82; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90USB1286 +#------------------------------------------------------------ + +part + id = "usb1286"; + desc = "AT90USB1286"; + signature = 0x1e 0x97 0x82; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90USB1287 +#------------------------------------------------------------ +# identical to AT90USB1286 + +part + id = "usb1287"; + desc = "AT90USB1287"; + signature = 0x1e 0x97 0x82; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega325 +#------------------------------------------------------------ + +part + id = "m325"; + desc = "ATMEGA325"; + signature = 0x1e 0x95 0x05; + has_jtag = yes; +# stk500_devcode = 0x??; # No STK500v1 support? +# avr910_devcode = 0x??; # Try the ATmega16 one + avr910_devcode = 0x74; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "0 0 0 0 0 0 0 0 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega645 +#------------------------------------------------------------ + +part + id = "m645"; + desc = "ATMEGA645"; + signature = 0x1E 0x96 0x05; + has_jtag = yes; +# stk500_devcode = 0x??; # No STK500v1 support? +# avr910_devcode = 0x??; # Try the ATmega16 one + avr910_devcode = 0x74; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " 0 0 0 0 0 0 0 0"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "0 0 0 0 0 0 0 0 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega3250 +#------------------------------------------------------------ + +part + id = "m3250"; + desc = "ATMEGA3250"; + signature = 0x1E 0x95 0x06; + has_jtag = yes; +# stk500_devcode = 0x??; # No STK500v1 support? +# avr910_devcode = 0x??; # Try the ATmega16 one + avr910_devcode = 0x74; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "0 0 0 0 0 0 0 0 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega6450 +#------------------------------------------------------------ + +part + id = "m6450"; + desc = "ATMEGA6450"; + signature = 0x1E 0x96 0x06; + has_jtag = yes; +# stk500_devcode = 0x??; # No STK500v1 support? +# avr910_devcode = 0x??; # Try the ATmega16 one + avr910_devcode = 0x74; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " 0 0 0 0 0 0 0 0"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "0 0 0 0 0 0 0 0 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; diff --git a/Marlin/pins.h b/Marlin/pins.h index f7c3e292a..ce21a9ade 100644 --- a/Marlin/pins.h +++ b/Marlin/pins.h @@ -567,6 +567,180 @@ #endif +/**************************************************************************************** +* Gen7 v1.1, v1.2, v1.3 pin assignment +* +****************************************************************************************/ + +#if MOTHERBOARD == 79 +#define MOTHERBOARD 78 +#define GEN7_V_1_3 +#endif + +#if MOTHERBOARD == 78 +#define KNOWN_BOARD + +#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__) +#error Oops! Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu. + +#endif + +//x axis pins +#define X_STEP_PIN 19 +#define X_DIR_PIN 18 +#define X_ENABLE_PIN 24 +#define X_MIN_PIN 7 +#define X_MAX_PIN -1 + +//y axis pins +#define Y_STEP_PIN 23 +#define Y_DIR_PIN 22 +#define Y_ENABLE_PIN 24 +#define Y_MIN_PIN 5 +#define Y_MAX_PIN -1 + +//z axis pins +#define Z_STEP_PIN 26 +#define Z_DIR_PIN 25 +#define Z_ENABLE_PIN 24 +#define Z_MIN_PIN 1 +#define Z_MAX_PIN -1 + +//extruder pins +#define E0_STEP_PIN 28 +#define E0_DIR_PIN 27 +#define E0_ENABLE_PIN 24 + +#define TEMP_0_PIN 1 +#define TEMP_1_PIN -1 +#define TEMP_2_PIN -1 +#define TEMP_BED_PIN 2 + +#define HEATER_0_PIN 4 +#define HEATER_1_PIN -1 +#define HEATER_2_PIN -1 +#define HEATER_BED_PIN 3 + + +#define SDPOWER -1 +#define SDSS -1 // SCL pin of I2C header +#define LED_PIN -1 + +#ifdef GEN7_V_1_3 +// Gen7 v1.3 removed the fan pin +#define FAN_PIN -1 +#else +#define FAN_PIN 31 +#endif +#define PS_ON_PIN 15 + +//our pin for debugging. +#define DEBUG_PIN 0 + +//our RS485 pins +#define TX_ENABLE_PIN 12 +#define RX_ENABLE_PIN 13 + +#endif + +/******************************************************************************* +********* +* Gen7 Alfons3 pin assignment +* +******************************************************************************** +********/ +/* These Pins are assigned for the modified GEN7 Board from Alfons3 Please review the pins and adjust it for your needs*/ + +#if MOTHERBOARD == 77 +#define KNOWN_BOARD + +#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__) + #error Oops! Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu. + +#endif + +//x axis pins + #define X_STEP_PIN 21 //different from stanard GEN7 + #define X_DIR_PIN 20 //different from stanard GEN7 + #define X_ENABLE_PIN 24 + #define X_MIN_PIN 0 + #define X_MAX_PIN -1 + + //y axis pins + #define Y_STEP_PIN 23 + #define Y_DIR_PIN 22 + #define Y_ENABLE_PIN 24 + #define Y_MIN_PIN 1 + #define Y_MAX_PIN -1 + + //z axis pins + #define Z_STEP_PIN 26 + #define Z_DIR_PIN 25 + #define Z_ENABLE_PIN 24 + #define Z_MIN_PIN 2 + #define Z_MAX_PIN -1 + + //extruder pins + #define E0_STEP_PIN 28 + #define E0_DIR_PIN 27 + #define E0_ENABLE_PIN 24 + + #define TEMP_0_PIN 2 + #define TEMP_1_PIN -1 + #define TEMP_2_PIN -1 + #define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed) + + #define HEATER_0_PIN 4 + #define HEATER_1_PIN -1 + #define HEATER_2_PIN -1 + #define HEATER_BED_PIN 3 // (bed) + + + + + #define SDPOWER -1 + #define SDSS 31 // SCL pin of I2C header || CS Pin for SD Card support + #define LED_PIN -1 + + #define FAN_PIN -1 + #define PS_ON_PIN 19 + //our pin for debugging. + + #define DEBUG_PIN -1 + + //our RS485 pins + //#define TX_ENABLE_PIN 12 + //#define RX_ENABLE_PIN 13 + + #define BEEPER -1 + #define SDCARDDETECT -1 + #define SUICIDE_PIN -1 //has to be defined; otherwise Power_off doesn't work + + //Pins for 4bit LCD Support + #define LCD_PINS_RS 18 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 16 + #define LCD_PINS_D5 15 + #define LCD_PINS_D6 13 + #define LCD_PINS_D7 14 + + //buttons are directly attached + #define BTN_EN1 11 + #define BTN_EN2 10 + #define BTN_ENC 12 //the click + + #define BLEN_C 2 + #define BLEN_B 1 + #define BLEN_A 0 + + + #define encrot0 0 + #define encrot1 2 + #define encrot2 3 + #define encrot3 1 + + +#endif #if MOTHERBOARD == 7 #define KNOWN_BOARD diff --git a/Marlin/temperature.cpp b/Marlin/temperature.cpp index 2f3888c01..95f0f8674 100644 --- a/Marlin/temperature.cpp +++ b/Marlin/temperature.cpp @@ -851,13 +851,21 @@ ISR(TIMER0_COMPB_vect) for(unsigned char e = 0; e < EXTRUDERS; e++) { if(current_raw[e] >= maxttemp[e]) { target_raw[e] = 0; - max_temp_error(e); - kill();; + #if (PS_ON != -1) + { + max_temp_error(e); + kill();; + } + #endif } if(current_raw[e] <= minttemp[e]) { target_raw[e] = 0; - min_temp_error(e); - kill(); + #if (PS_ON != -1) + { + min_temp_error(e); + kill(); + } + #endif } } diff --git a/Marlin/ultralcd.h b/Marlin/ultralcd.h index 08ac950d3..db8a13183 100644 --- a/Marlin/ultralcd.h +++ b/Marlin/ultralcd.h @@ -27,7 +27,11 @@ #define CLICKED (buttons&EN_C) #define BLOCK {blocking=millis()+blocktime;} - #define CARDINSERTED (READ(SDCARDDETECT)==0) + #if (SDCARDDETECT > -1) + { + #define CARDINSERTED (READ(SDCARDDETECT)==0) + } + #endif #else @@ -50,7 +54,7 @@ #define blocktime 500 #define lcdslow 5 - enum MainStatus{Main_Status, Main_Menu, Main_Prepare, Main_Control, Main_SD,Sub_TempControl,Sub_MotionControl}; + enum MainStatus{Main_Status, Main_Menu, Main_Prepare,Sub_PrepareMove, Main_Control, Main_SD,Sub_TempControl,Sub_MotionControl}; class MainMenu{ public: @@ -67,6 +71,7 @@ void showControl(); void showControlMotion(); void showControlTemp(); + void showAxisMove(); void showSD(); bool force_lcd_update; int lastencoderpos; diff --git a/Marlin/ultralcd.pde b/Marlin/ultralcd.pde index 68a595475..32ef2f3b8 100644 --- a/Marlin/ultralcd.pde +++ b/Marlin/ultralcd.pde @@ -130,13 +130,17 @@ void beep() { //return; #ifdef ULTIPANEL - pinMode(BEEPER,OUTPUT); - for(int8_t i=0;i<20;i++){ - WRITE(BEEPER,HIGH); - delay(5); - WRITE(BEEPER,LOW); - delay(5); - } + #if (BEEPER > -1) + { + pinMode(BEEPER,OUTPUT); + for(int8_t i=0;i<20;i++){ + WRITE(BEEPER,HIGH); + delay(5); + WRITE(BEEPER,LOW); + delay(5); + } + } + #endif #endif } @@ -144,13 +148,17 @@ void beepshort() { //return; #ifdef ULTIPANEL - pinMode(BEEPER,OUTPUT); - for(int8_t i=0;i<10;i++){ - WRITE(BEEPER,HIGH); - delay(3); - WRITE(BEEPER,LOW); - delay(3); - } + #if (BEEPER > -1) + { + pinMode(BEEPER,OUTPUT); + for(int8_t i=0;i<10;i++){ + WRITE(BEEPER,HIGH); + delay(3); + WRITE(BEEPER,LOW); + delay(3); + } + } + #endif #endif } @@ -197,7 +205,11 @@ void buttons_init() WRITE(BTN_EN1,HIGH); WRITE(BTN_EN2,HIGH); WRITE(BTN_ENC,HIGH); - WRITE(SDCARDDETECT,HIGH); + #if (SDCARDDETECT > -1) + { + WRITE(SDCARDDETECT,HIGH); + } + #endif #else pinMode(SHIFT_CLK,OUTPUT); pinMode(SHIFT_LD,OUTPUT); @@ -445,7 +457,7 @@ void MainMenu::showStatus() force_lcd_update=false; } -enum {ItemP_exit, ItemP_autostart,ItemP_disstep,ItemP_home, ItemP_origin, ItemP_preheat, ItemP_cooldown,ItemP_extrude}; +enum {ItemP_exit, ItemP_autostart,ItemP_disstep,ItemP_home, ItemP_origin, ItemP_preheat, ItemP_cooldown,/*ItemP_extrude,*/ItemP_move}; //any action must not contain a ',' character anywhere, or this breaks: #define MENUITEM(repaint_action, click_action) \ @@ -473,28 +485,193 @@ void MainMenu::showPrepare() MENUITEM( lcdprintPGM(" Disable Steppers") , BLOCK;enquecommand("M84");beepshort(); ) ; break; case ItemP_home: - MENUITEM( lcdprintPGM(" Auto Home") , BLOCK;enquecommand("G28 X-105 Y-105 Z0");beepshort(); ) ; + MENUITEM( lcdprintPGM(" Auto Home") , BLOCK;enquecommand("G28 X0 Y0 Z0");beepshort(); ) ; break; case ItemP_origin: MENUITEM( lcdprintPGM(" Set Origin") , BLOCK;enquecommand("G92 X0 Y0 Z0");beepshort(); ) ; break; case ItemP_preheat: - MENUITEM( lcdprintPGM(" Preheat") , BLOCK;setTargetHotend0(170);setTargetBed(70);beepshort(); ) ; + MENUITEM( lcdprintPGM(" Preheat") , BLOCK;setTargetHotend0(227);setTargetBed(105);beepshort(); ) ; break; case ItemP_cooldown: MENUITEM( lcdprintPGM(" Cooldown") , BLOCK;setTargetHotend0(0);setTargetBed(0);beepshort(); ) ; break; - case ItemP_extrude: - MENUITEM( lcdprintPGM(" Extrude") , BLOCK;enquecommand("G92 E0");enquecommand("G1 F700 E50");beepshort(); ) ; +// case ItemP_extrude: + // MENUITEM( lcdprintPGM(" Extrude") , BLOCK;enquecommand("G92 E0");enquecommand("G1 F700 E50");beepshort(); ) ; + // break; + case ItemP_move: + MENUITEM( lcdprintPGM(" Move Axis \x7E") , BLOCK;status=Sub_PrepareMove;beepshort(); ); break; - - - default: + default: break; } line++; } - updateActiveLines(ItemP_extrude,encoderpos); + updateActiveLines(ItemP_move,encoderpos); +} + +enum { + ItemAM_exit, + ItemAM_X, ItemAM_Y, ItemAM_Z, ItemAM_E +}; + +void MainMenu::showAxisMove() +{ + uint8_t line=0; + int oldencoderpos=0; + clearIfNecessary(); + for(int8_t i=lineoffset;i0) + { + enquecommand("G1 F700 X0.1"); + oldencoderpos=encoderpos; + encoderpos=0; + } + + else if (encoderpos < 0) + { + enquecommand("G1 F700 X-0.1"); + oldencoderpos=encoderpos; + encoderpos=0; + } + lcd.setCursor(13,line);lcd.print(ftostr32(current_position[X_AXIS])); + } + } + break; + case ItemAM_Y: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(" Y:"); + lcd.setCursor(13,line);lcd.print(ftostr32(current_position[Y_AXIS])); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + enquecommand("G91"); + } + else + { + enquecommand("G90"); + encoderpos=activeline*lcdslow; + beepshort(); + } + BLOCK; + } + if(linechanging) + { + if (encoderpos >0) + { + enquecommand("G1 F700 Y0.1"); + oldencoderpos=encoderpos; + encoderpos=0; + } + + else if (encoderpos < 0) + { + enquecommand("G1 F700 Y-0.1"); + oldencoderpos=encoderpos; + encoderpos=0; + } + lcd.setCursor(13,line);lcd.print(ftostr32(current_position[Y_AXIS])); + } + } + break; + case ItemAM_Z: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(" Z:"); + lcd.setCursor(13,line);lcd.print(ftostr32(current_position[Z_AXIS])); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + enquecommand("G91"); + } + else + { + enquecommand("G90"); + encoderpos=activeline*lcdslow; + beepshort(); + } + BLOCK; + } + if(linechanging) + { + if (encoderpos >0) + { + enquecommand("G1 F170 Z0.1"); + oldencoderpos=encoderpos; + encoderpos=0; + } + + else if (encoderpos < 0) + { + enquecommand("G1 F1700 Z-0.1"); + oldencoderpos=encoderpos; + encoderpos=0; + } + lcd.setCursor(13,line);lcd.print(ftostr32(current_position[Z_AXIS])); + } + } + break; + case ItemAM_E: + MENUITEM( lcdprintPGM(" Extrude") , BLOCK;enquecommand("G92 E0");enquecommand("G1 F700 E5");beepshort(); ) ; + break; + default: + break; + } + line++; + } + updateActiveLines(ItemAM_E,encoderpos); } enum {ItemT_exit,ItemT_speed,ItemT_flow,ItemT_nozzle, @@ -1140,7 +1317,7 @@ enum { ItemCM_vmaxx, ItemCM_vmaxy, ItemCM_vmaxz, ItemCM_vmaxe, ItemCM_vtravmin,ItemCM_vmin, ItemCM_amaxx, ItemCM_amaxy, ItemCM_amaxz, ItemCM_amaxe, - ItemCM_aret,ItemCM_esteps + ItemCM_aret, ItemCM_xsteps,ItemCM_ysteps, ItemCM_zsteps, ItemCM_esteps }; @@ -1416,11 +1593,126 @@ void MainMenu::showControlMotion() } }break; + case ItemCM_xsteps://axis_steps_per_unit[i] = code_value(); + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(" X steps/mm:"); + lcd.setCursor(13,line);lcd.print(itostr4(axis_steps_per_unit[0])); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(int)axis_steps_per_unit[0]; + } + else + { + float factor=float(encoderpos)/float(axis_steps_per_unit[0]); + position[X_AXIS]=lround(position[X_AXIS]*factor); + //current_position[3]*=factor; + axis_steps_per_unit[X_AXIS]= encoderpos; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<5) encoderpos=5; + if(encoderpos>9999) encoderpos=9999; + lcd.setCursor(13,line);lcd.print(itostr4(encoderpos)); + } + + }break; + case ItemCM_ysteps://axis_steps_per_unit[i] = code_value(); + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(" Y steps/mm:"); + lcd.setCursor(13,line);lcd.print(itostr4(axis_steps_per_unit[1])); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(int)axis_steps_per_unit[1]; + } + else + { + float factor=float(encoderpos)/float(axis_steps_per_unit[1]); + position[Y_AXIS]=lround(position[Y_AXIS]*factor); + //current_position[3]*=factor; + axis_steps_per_unit[Y_AXIS]= encoderpos; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<5) encoderpos=5; + if(encoderpos>9999) encoderpos=9999; + lcd.setCursor(13,line);lcd.print(itostr4(encoderpos)); + } + + }break; + case ItemCM_zsteps://axis_steps_per_unit[i] = code_value(); + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(" Z steps/mm:"); + lcd.setCursor(13,line);lcd.print(itostr4(axis_steps_per_unit[2])); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(int)axis_steps_per_unit[2]; + } + else + { + float factor=float(encoderpos)/float(axis_steps_per_unit[2]); + position[Z_AXIS]=lround(position[Z_AXIS]*factor); + //current_position[3]*=factor; + axis_steps_per_unit[Z_AXIS]= encoderpos; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<5) encoderpos=5; + if(encoderpos>9999) encoderpos=9999; + lcd.setCursor(13,line);lcd.print(itostr4(encoderpos)); + } + + }break; + case ItemCM_esteps://axis_steps_per_unit[i] = code_value(); { if(force_lcd_update) { - lcd.setCursor(0,line);lcdprintPGM(" Esteps/mm:"); + lcd.setCursor(0,line);lcdprintPGM(" E steps/mm:"); lcd.setCursor(13,line);lcd.print(itostr4(axis_steps_per_unit[3])); } @@ -1636,7 +1928,7 @@ void MainMenu::showSD() status=Main_Status; lcd_status(card.filename); } - } + } } } @@ -1801,6 +2093,10 @@ void MainMenu::update() showPrepare(); } }break; + case Sub_PrepareMove: + { + showAxisMove(); + }break; case Main_Control: { showControl(); diff --git a/README b/README deleted file mode 100644 index 2487d4875..000000000 --- a/README +++ /dev/null @@ -1,64 +0,0 @@ -This RepRap firmware is a mashup between Sprinter, grbl and many original parts. - (https://github.com/kliment/Sprinter) - (https://github.com/simen/grbl/tree) - -Derived from Sprinter and Grbl by Erik van der Zalm. -Sprinters lead developers are Kliment and caru. -Grbls lead developer is Simen Svale Skogsrud. -It has been adapted to the Ultimaker Printer by: -Bernhard Kubicek, Matthijs Keuper, Bradley Feldman, and others... - - -Features: - - Interrupt based movement with real linear acceleration - - High steprate - - Look ahead (Keep the speed high when possible. High cornering speed) - - Interrupt based temperature protection - - preliminary support for Matthew Roberts advance algorithm - For more info see: http://reprap.org/pipermail/reprap-dev/2011-May/003323.html - - Full endstop support - - Simple LCD support (16x2) - - SD Card support - - Provisions for Bernhard Kubicek's new hardware control console and 20x4 lcd - -This firmware is optimized for Ultimaker's gen6 electronics (including the Ultimaker 1.5.x daughterboard and Arduino Mega 2560). - -The default baudrate is 115200. - - -======================================================================================== - -Configuring and compilation - - -Install the latest arduino software IDE/toolset (currently 0022) - http://www.arduino.cc/en/Main/Software - -Install Ultimaker's RepG 25 build - http://software.ultimaker.com -(or alternatively install Kliment's printrun/pronterface https://github.com/kliment/Printrun_) - -Copy the Ultimaker Marlin firmware - https:/github.com/bkubicek/Marlin - (Use the download button) - -Start the arduino IDE. -Select Tools -> Board -> Arduino Mega 2560 -Select the correct serial port in Tools ->Serial Port -Open Marlin.pde - -Click the Verify/Compile button - -Click the Upload button -If all goes well the firmware is uploading - -Start Ultimaker's Custom RepG 25 -Make sure Show Experimental Profiles is enabled in Preferences -Select Sprinter as the Driver - -Press the Connect button. - -KNOWN ISSUES: RepG will display: Unknown: marlin x.y.z - -That's ok. Enjoy Silky Smooth Printing. - diff --git a/README.md b/README.md index 6f04764c9..11b4be60f 100644 --- a/README.md +++ b/README.md @@ -1,3 +1,23 @@ +SCUBA82's fork: +----------------- + +The main goal of my fork is porting the brilliant Marlin firmware to GEN7 Boards. +I'm working on a 16MHz GEN7 board and have only tested with this configuration. +But there were reports about successfully running it at 20 MHz. Expect 25% faster moves and maybe some other issues. + +Using lcd and sdcard support on an ATMega644(P) is not possible cause the sketch is way too big for its memory. +I switched to an ATMega1284P which has double size program memory. Unfortunately it's not supported in Arduino IDE out of the box but expect a tutorial on how to compile for it soon. +For the necessary pin breakouts I used Alfons3 design of GEN7 (https://github.com/Alfons3/Generation_7_Electronics) with an additional breakout for pin A0/D31. +I'll publish my desing as soon as possible. + +You have to use different chip fuses to get Marlin running. +The fuses I'm using are lfuse: 0xF7 hfuse: 0xD4 efuse: 0xFD + +For questions take a look into http://forums.reprap.org/read.php?181,118329 or send me an e-mail: christian_thalhammer@gmx.at + + +Expect this fork to be highly experimental. + WARNING: -------- THIS IS RELEASE CANDIDATE 1 FOR MARLIN 1.0.0