From 2d74c2042a442d70d756825f89a17c708e65ded3 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Fri, 29 Nov 2019 20:05:32 -0600 Subject: [PATCH] Clean up whitespace, GTM32 pins --- Marlin/src/pins/stm32/pins_FYSETC_S6.h | 4 +- Marlin/src/pins/stm32/pins_GTM32_REV_B.h | 464 +++++++++--------- .../PlatformIO/scripts/fysetc_STM32S6.py | 4 +- .../PlatformIO/variants/FYSETC_S6/ldscript.ld | 4 +- 4 files changed, 237 insertions(+), 239 deletions(-) diff --git a/Marlin/src/pins/stm32/pins_FYSETC_S6.h b/Marlin/src/pins/stm32/pins_FYSETC_S6.h index def6406e4..227fe4cd5 100644 --- a/Marlin/src/pins/stm32/pins_FYSETC_S6.h +++ b/Marlin/src/pins/stm32/pins_FYSETC_S6.h @@ -39,7 +39,7 @@ // // EEPROM Emulation -// +// #define FLASH_EEPROM_EMULATION //#define SRAM_EEPROM_EMULATION @@ -202,7 +202,7 @@ #define DOGLCD_CS PC12 #define DOGLCD_A0 PD0 #endif - + #endif #if ENABLED(NEWPANEL) diff --git a/Marlin/src/pins/stm32/pins_GTM32_REV_B.h b/Marlin/src/pins/stm32/pins_GTM32_REV_B.h index f3ce8a6c0..fcb510e16 100644 --- a/Marlin/src/pins/stm32/pins_GTM32_REV_B.h +++ b/Marlin/src/pins/stm32/pins_GTM32_REV_B.h @@ -1,232 +1,232 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * 24 May 2018 - @chepo for STM32F103VET6 - * Schematic: https://github.com/chepo92/Smartto/blob/master/circuit_diagram/Rostock301/Hardware_GTM32_PRO_VB.pdf - */ - -#ifndef __STM32F1__ - #error "Oops! Select an STM32F1 board in 'Tools > Board.'" -#endif - -#define BOARD_NAME "GTM32 Pro VB" -#define DEFAULT_MACHINE_NAME "M201" - -//#define DISABLE_DEBUG - -// -// It is required to disable JTAG function because its pins are -// used as GPIO to drive the Y axis stepper. -// DO NOT ENABLE! -// -#define DISABLE_JTAG - -// -// If you don't need the SWDIO functionality (any more), you may -// disable SWD here to regain PA13/PA14 pins for other use. -// -//#define DISABLE_JTAGSWD - -// Ignore temp readings during development. -//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 - -// Enable EEPROM Emulation for this board as it doesn't have EEPROM -#define FLASH_EEPROM_EMULATION -#define E2END 0xFFF // 4KB - -// -// Limit Switches -// -#define X_MIN_PIN PE5 // ENDSTOPS 15,17 -#define X_MAX_PIN PE4 // ENDSTOPS 16,18 -#define Y_MIN_PIN PE3 // ENDSTOPS 9,11 -#define Y_MAX_PIN PE2 // ENDSTOPS 10,12 -#define Z_MIN_PIN PE1 // ENDSTOPS 3,5 -#define Z_MAX_PIN PE0 // ENDSTOPS 4,6 - -// -// Steppers -// -#define X_STEP_PIN PC6 -#define X_DIR_PIN PD13 -#define X_ENABLE_PIN PA8 - -#define Y_STEP_PIN PA12 -#define Y_DIR_PIN PA11 -#define Y_ENABLE_PIN PA15 - -#define Z_STEP_PIN PD6 -#define Z_DIR_PIN PD3 -#define Z_ENABLE_PIN PB3 - -// Extruder stepper pins -// NOTE: Numbering here is made according to EXT connector numbers, -// the FANx_PWM line numbering in the schematics is reverse. -// That is, E0_*_PIN are the E2_* lines connected to E2_A1 step -// stick that drives the EXT0 output on the board. -// -#define E0_STEP_PIN PC14 -#define E0_DIR_PIN PC13 -#define E0_ENABLE_PIN PC15 - -#define E1_STEP_PIN PA0 -#define E1_DIR_PIN PB6 -#define E1_ENABLE_PIN PA1 - -#define E2_STEP_PIN PB2 -#define E2_DIR_PIN PB11 -#define E2_ENABLE_PIN PC4 - -// -// Heaters / Fans - INFO: Extruders ports are in reverse order. Pin numbers here differ from schematic. Original firmware assumes heater, fan and temp sensor on port EXT0 PB0, PB9, PC2. -// -#define HEATER_0_PIN PB0 // EXT0 port. -#define HEATER_1_PIN PB5 // EXT1 port -#define HEATER_2_PIN PB4 // EXT2 port -#define HEATER_BED_PIN PB1 // CON2X3 hotbed port - -// -// These are FAN PWM pins on EXT0..EXT2 connectors. -// -//#define FAN_PIN PB9 // EXT0 port -#define FAN1_PIN PB8 // EXT1 port -#define FAN2_PIN PB7 // EXT2 port -#define ORIG_E0_AUTO_FAN_PIN PB9 // EXT0 port, used as main extruder fan - -// -// Temperature Sensors -// -#define TEMP_0_PIN PC2 // EXT0 port -#define TEMP_1_PIN PC1 // EXT1 port -#define TEMP_2_PIN PC0 // EXT2 port -#define TEMP_BED_PIN PC3 // CON2X3 hotbed port - -// -// Misc. Functions -// -#define LED_PWM PD12 // External LED, pin 2 on LED labeled connector - -// -// LCD / Controller -// -#if HAS_SPI_LCD - - #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) - - // - // LCD display on J2 FFC40 - // Geeetech's LCD2004A Control Panel is very much like - // RepRapDiscount Smart Controller, but adds an FFC40 connector - // connected with a flat wire to J2 connector on the board. - // - #define LCD_PINS_RS PE6 // CS chip select /SS chip slave select - #define LCD_PINS_ENABLE PE14 // SID (MOSI) - #define LCD_PINS_D4 PD8 // SCK (CLK) clock - #define LCD_PINS_D5 PD9 - #define LCD_PINS_D6 PD10 - #define LCD_PINS_D7 PE15 - - #define BTN_EN1 PE8 - #define BTN_EN2 PE9 - #define BTN_ENC PE13 - - //#define GTM32_PRO_VB_USE_LCD_BEEPER - #define GTM32_PRO_VB_USE_EXT_SDCARD - - #else - // - // Serial LCDs can be implemented in ExtUI - // - //#define LCD_UART_TX PD8 - //#define LCD_UART_RX PD9 - #endif - - #if HAS_GRAPHICAL_LCD - #ifndef ST7920_DELAY_1 - #define ST7920_DELAY_1 DELAY_NS(96) - #endif - #ifndef ST7920_DELAY_2 - #define ST7920_DELAY_2 DELAY_NS(48) - #endif - #ifndef ST7920_DELAY_3 - #define ST7920_DELAY_3 DELAY_NS(715) - #endif - #endif - -#endif // HAS_SPI_LCD - -// -// Beeper -// -#ifdef GTM32_PRO_VB_USE_LCD_BEEPER - // This is pin 32 on J2 FFC40 and pin, goes to the beeper - // on Geeetech's version of RepRapDiscount Smart Controller - // (e.g. on Rostock 301) - #define BEEPER_PIN PE12 -#else - // This is the beeper on the board itself - #define BEEPER_PIN PB10 -#endif - -/** - * The on-board TF_CARD_SOCKET microSD card socket has no SD Detect pin wired. - * - * The FFC10 (SD_CARD) connector has the same pins as those routed to the FFC40 (J2) - * connector, which usually go to the SD Card slot on the Geeetech version of the - * RepRapDiscount Smart Controller. Both connectors have the card detect signal. - * - * The on-board SD card and the external card (on either SD_CARD or J2) are two - * separate devices and can work simultaneously. Unfortunately, Marlin only supports - * a single SPI Flash device (as of 2019-07-05) so only one is enabled here. - */ -#if ENABLED(GTM32_PRO_VB_USE_EXT_SDCARD) - // - // SD Card on RepRapDiscount Smart Controller (J2) or on SD_CARD connector - // - #define SS_PIN PB12 / PC11 - #define SCK_PIN PB13 // PC12 // PC1 - #define MOSI_PIN PB15 // PD2 // PD2 - #define MISO_PIN PB14 // PC8 - #define SD_DETECT_PIN PC7 - -#else - // - // Use the on-board card socket labeled TF_CARD_SOCKET - // - #define SS_PIN PA4 - #define SCK_PIN PA5 - #define MOSI_PIN PA7 - #define MISO_PIN PA6 // PA6 - #define SD_DETECT_PIN -1 // Card detect is not connected -#endif - -#define SDSS SS_PIN - -// -// ESP WiFi can be soldered to J9 connector which is wired to USART2. -// Must define WIFISUPPORT in Configuration.h for the printer. -// -#define ESP_WIFI_MODULE_COM 2 -#define ESP_WIFI_MODULE_BAUDRATE 115200 -#define ESP_WIFI_MODULE_RESET_PIN -1 +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * 24 May 2018 - @chepo for STM32F103VET6 + * Schematic: https://github.com/chepo92/Smartto/blob/master/circuit_diagram/Rostock301/Hardware_GTM32_PRO_VB.pdf + */ + +#ifndef __STM32F1__ + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#endif + +#define BOARD_NAME "GTM32 Pro VB" +#define DEFAULT_MACHINE_NAME "M201" + +//#define DISABLE_DEBUG + +// +// It is required to disable JTAG function because its pins are +// used as GPIO to drive the Y axis stepper. +// DO NOT ENABLE! +// +#define DISABLE_JTAG + +// +// If you don't need the SWDIO functionality (any more), you may +// disable SWD here to regain PA13/PA14 pins for other use. +// +//#define DISABLE_JTAGSWD + +// Ignore temp readings during development. +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 + +// Enable EEPROM Emulation for this board as it doesn't have EEPROM +#define FLASH_EEPROM_EMULATION +#define E2END 0xFFF // 4KB + +// +// Limit Switches +// +#define X_MIN_PIN PE5 // ENDSTOPS 15,17 +#define X_MAX_PIN PE4 // ENDSTOPS 16,18 +#define Y_MIN_PIN PE3 // ENDSTOPS 9,11 +#define Y_MAX_PIN PE2 // ENDSTOPS 10,12 +#define Z_MIN_PIN PE1 // ENDSTOPS 3,5 +#define Z_MAX_PIN PE0 // ENDSTOPS 4,6 + +// +// Steppers +// +#define X_STEP_PIN PC6 +#define X_DIR_PIN PD13 +#define X_ENABLE_PIN PA8 + +#define Y_STEP_PIN PA12 +#define Y_DIR_PIN PA11 +#define Y_ENABLE_PIN PA15 + +#define Z_STEP_PIN PD6 +#define Z_DIR_PIN PD3 +#define Z_ENABLE_PIN PB3 + +// Extruder stepper pins +// NOTE: Numbering here is made according to EXT connector numbers, +// the FANx_PWM line numbering in the schematics is reverse. +// That is, E0_*_PIN are the E2_* lines connected to E2_A1 step +// stick that drives the EXT0 output on the board. +// +#define E0_STEP_PIN PC14 +#define E0_DIR_PIN PC13 +#define E0_ENABLE_PIN PC15 + +#define E1_STEP_PIN PA0 +#define E1_DIR_PIN PB6 +#define E1_ENABLE_PIN PA1 + +#define E2_STEP_PIN PB2 +#define E2_DIR_PIN PB11 +#define E2_ENABLE_PIN PC4 + +// +// Heaters / Fans - INFO: Extruders ports are in reverse order. Pin numbers here differ from schematic. Original firmware assumes heater, fan and temp sensor on port EXT0 PB0, PB9, PC2. +// +#define HEATER_0_PIN PB0 // EXT0 port. +#define HEATER_1_PIN PB5 // EXT1 port +#define HEATER_2_PIN PB4 // EXT2 port +#define HEATER_BED_PIN PB1 // CON2X3 hotbed port + +// +// These are FAN PWM pins on EXT0..EXT2 connectors. +// +//#define FAN_PIN PB9 // EXT0 port +#define FAN1_PIN PB8 // EXT1 port +#define FAN2_PIN PB7 // EXT2 port +#define ORIG_E0_AUTO_FAN_PIN PB9 // EXT0 port, used as main extruder fan + +// +// Temperature Sensors +// +#define TEMP_0_PIN PC2 // EXT0 port +#define TEMP_1_PIN PC1 // EXT1 port +#define TEMP_2_PIN PC0 // EXT2 port +#define TEMP_BED_PIN PC3 // CON2X3 hotbed port + +// +// Misc. Functions +// +#define LED_PWM PD12 // External LED, pin 2 on LED labeled connector + +// +// LCD / Controller +// +#if HAS_SPI_LCD + + #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) + + // + // LCD display on J2 FFC40 + // Geeetech's LCD2004A Control Panel is very much like + // RepRapDiscount Smart Controller, but adds an FFC40 connector + // connected with a flat wire to J2 connector on the board. + // + #define LCD_PINS_RS PE6 // CS chip select /SS chip slave select + #define LCD_PINS_ENABLE PE14 // SID (MOSI) + #define LCD_PINS_D4 PD8 // SCK (CLK) clock + #define LCD_PINS_D5 PD9 + #define LCD_PINS_D6 PD10 + #define LCD_PINS_D7 PE15 + + #define BTN_EN1 PE8 + #define BTN_EN2 PE9 + #define BTN_ENC PE13 + + //#define GTM32_PRO_VB_USE_LCD_BEEPER + #define GTM32_PRO_VB_USE_EXT_SDCARD + + #else + // + // Serial LCDs can be implemented in ExtUI + // + //#define LCD_UART_TX PD8 + //#define LCD_UART_RX PD9 + #endif + + #if HAS_GRAPHICAL_LCD + #ifndef ST7920_DELAY_1 + #define ST7920_DELAY_1 DELAY_NS(96) + #endif + #ifndef ST7920_DELAY_2 + #define ST7920_DELAY_2 DELAY_NS(48) + #endif + #ifndef ST7920_DELAY_3 + #define ST7920_DELAY_3 DELAY_NS(715) + #endif + #endif + +#endif // HAS_SPI_LCD + +// +// Beeper +// +#ifdef GTM32_PRO_VB_USE_LCD_BEEPER + // This is pin 32 on J2 FFC40 and pin, goes to the beeper + // on Geeetech's version of RepRapDiscount Smart Controller + // (e.g. on Rostock 301) + #define BEEPER_PIN PE12 +#else + // This is the beeper on the board itself + #define BEEPER_PIN PB10 +#endif + +/** + * The on-board TF_CARD_SOCKET microSD card socket has no SD Detect pin wired. + * + * The FFC10 (SD_CARD) connector has the same pins as those routed to the FFC40 (J2) + * connector, which usually go to the SD Card slot on the Geeetech version of the + * RepRapDiscount Smart Controller. Both connectors have the card detect signal. + * + * The on-board SD card and the external card (on either SD_CARD or J2) are two + * separate devices and can work simultaneously. Unfortunately, Marlin only supports + * a single SPI Flash device (as of 2019-07-05) so only one is enabled here. + */ +#if ENABLED(GTM32_PRO_VB_USE_EXT_SDCARD) + // + // SD Card on RepRapDiscount Smart Controller (J2) or on SD_CARD connector + // + #define SS_PIN PB12 // PC11 + #define SCK_PIN PB13 // PC12 // PC1 + #define MOSI_PIN PB15 // PD2 // PD2 + #define MISO_PIN PB14 // PC8 + #define SD_DETECT_PIN PC7 + +#else + // + // Use the on-board card socket labeled TF_CARD_SOCKET + // + #define SS_PIN PA4 + #define SCK_PIN PA5 + #define MOSI_PIN PA7 + #define MISO_PIN PA6 // PA6 + #define SD_DETECT_PIN -1 // Card detect is not connected +#endif + +#define SDSS SS_PIN + +// +// ESP WiFi can be soldered to J9 connector which is wired to USART2. +// Must define WIFISUPPORT in Configuration.h for the printer. +// +#define ESP_WIFI_MODULE_COM 2 +#define ESP_WIFI_MODULE_BAUDRATE 115200 +#define ESP_WIFI_MODULE_RESET_PIN -1 diff --git a/buildroot/share/PlatformIO/scripts/fysetc_STM32S6.py b/buildroot/share/PlatformIO/scripts/fysetc_STM32S6.py index 9a5a02e61..de1a5e787 100644 --- a/buildroot/share/PlatformIO/scripts/fysetc_STM32S6.py +++ b/buildroot/share/PlatformIO/scripts/fysetc_STM32S6.py @@ -10,7 +10,7 @@ platform = env.PioPlatform() board = env.BoardConfig() FRAMEWORK_DIR = platform.get_package_dir("framework-arduinoststm32") -#FRAMEWORK_DIR = platform.get_package_dir("framework-arduinoststm32@3.10500.190327") +#FRAMEWORK_DIR = platform.get_package_dir("framework-arduinoststm32@3.10500.190327") CMSIS_DIR = os.path.join(FRAMEWORK_DIR, "CMSIS", "CMSIS") assert os.path.isdir(FRAMEWORK_DIR) assert os.path.isdir(CMSIS_DIR) @@ -31,7 +31,7 @@ for file_name in os.listdir(source_dir): full_file_name = os.path.join(source_dir, file_name) if os.path.isfile(full_file_name): shutil.copy(full_file_name, variant_dir) - + # Relocate firmware from 0x08000000 to 0x08002000 #env['CPPDEFINES'].remove(("VECT_TAB_ADDR", 134217728)) #env['CPPDEFINES'].append(("VECT_TAB_ADDR", "0x08010000")) diff --git a/buildroot/share/PlatformIO/variants/FYSETC_S6/ldscript.ld b/buildroot/share/PlatformIO/variants/FYSETC_S6/ldscript.ld index 235c432ec..2a61072cb 100644 --- a/buildroot/share/PlatformIO/variants/FYSETC_S6/ldscript.ld +++ b/buildroot/share/PlatformIO/variants/FYSETC_S6/ldscript.ld @@ -133,7 +133,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -173,8 +173,6 @@ SECTIONS . = ALIGN(4); } >RAM - - /* Remove information from the standard libraries */ /DISCARD/ : {