Patch up Teensy 3.1/3.2 pins, tests

This commit is contained in:
Scott Lahteine 2019-08-02 09:59:01 -05:00
parent 337361d588
commit 2e27e3ba04
2 changed files with 50 additions and 43 deletions

View file

@ -21,17 +21,17 @@
*/
#pragma once
/****************************************************************************************
* Teensy 3.1 (MK20DX256) and Teensy 3.2 (MK20DX256) Breadboard pin assignments
* Requires the Teensyduino software with Teensy 3.1 or Teensy 3.2 selected in Arduino IDE!
* http://www.pjrc.com/teensy/teensyduino.html
****************************************************************************************/
/**
* Teensy 3.1 (MK20DX256) and Teensy 3.2 (MK20DX256) Breadboard pin assignments
* Requires the Teensyduino software with Teensy 3.1 or Teensy 3.2 selected in Arduino IDE!
* http://www.pjrc.com/teensy/teensyduino.html
*/
#if !IS_32BIT_TEENSY
#error "Oops! Select 'Teensy 3.1' or 'Teensy 3.2' in 'Tools > Board.'"
#endif
#if IS_TEENSY32
#ifndef BOARD_NAME
#define BOARD_NAME "Teensy3.2"
#endif
@ -41,64 +41,73 @@
//
// Limit Switches
//
#define X_STOP_PIN 3
#define Y_STOP_PIN 4
#define Z_STOP_PIN 5
#define X_STOP_PIN 3
#define Y_STOP_PIN 4
#define Z_STOP_PIN 5
//
// Steppers
//
#define X_STEP_PIN 5
#define X_DIR_PIN 6
#define X_ENABLE_PIN 2
#define X_STEP_PIN 5
#define X_DIR_PIN 6
#define X_ENABLE_PIN 2
#define Y_STEP_PIN 7
#define Y_DIR_PIN 8
#define Y_ENABLE_PIN 2
#define Y_STEP_PIN 7
#define Y_DIR_PIN 8
#define Y_ENABLE_PIN 2
#define Z_STEP_PIN 9
#define Z_STEP_PIN 9
#define Z_DIR_PIN 10
#define Z_ENABLE_PIN 2
#define Z_ENABLE_PIN 2
#define E0_STEP_PIN 11
#define E0_DIR_PIN 12
#define E0_ENABLE_PIN 2
#define E0_ENABLE_PIN 2
// #define E1_STEP_PIN 33
// #define E1_DIR_PIN 34
// #define E1_ENABLE_PIN 35
//#define E1_STEP_PIN 33
//#define E1_DIR_PIN 34
//#define E1_ENABLE_PIN 35
//
// Heaters / Fans
//
#define HEATER_0_PIN 20
// #define HEATER_1_PIN 36
// #define HEATER_1_PIN 36
#define HEATER_BED_PIN 21
#ifndef FAN_PIN
#define FAN_PIN 22
#endif
#define TEMP_0_PIN 14 // Extruder / Analog pin numbering: 2 => A2
// #define TEMP_1_PIN 0
#define TEMP_BED_PIN 15 // Bed / Analog pin numbering
//
// Temperature Sensors
//
#define TEMP_0_PIN 14 // Analog Input - Extruder 2 => A2
//#define TEMP_1_PIN 0 // Analog Input
#define TEMP_BED_PIN 15 // Analog Input - Bed
// #define SDSS 16 // 8
#ifndef FILWIDTH_PIN
#define FILWIDTH_PIN 6 // Analog Input
#endif
//
// Misc. Functions
//
//#define SDSS 16 // 8
#define LED_PIN 13
#define PS_ON_PIN -1
#define ALARM_PIN -1
// #define FILWIDTH_PIN 6
// #define SOL1_PIN 28
//#define SOL1_PIN 28
//
// LCD / Controller
//
//#define SCK_PIN 13
//#define MISO_PIN 12
//#define MOSI_PIN 11
#if 0
// Pretty sure this is obsolete!
// Please use Marlin 1.1.x pins files as reference for new pins files.
#ifndef SDSUPPORT
// these are defined in the SD library if building with SD support
#define SCK_PIN 13
#define MISO_PIN 12
#define MOSI_PIN 11
#endif
#endif
/*
#ifdef ULTRA_LCD
#if HAS_SPI_LCD
#define LCD_PINS_RS 40
#define LCD_PINS_ENABLE 41
#define LCD_PINS_D4 42

View file

@ -17,9 +17,7 @@ exec_test $1 $2 "Teensy3.1 with default config"
#
restore_configs
opt_set MOTHERBOARD BOARD_TEENSY31_32
opt_set EXTRUDERS 2
opt_set TEMP_SENSOR_0 1
opt_set TEMP_SENSOR_1 5
opt_set TEMP_SENSOR_BED 1
opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LCD_INFO_MENU SDSUPPORT SDCARD_SORT_ALPHA \
FILAMENT_WIDTH_SENSOR FILAMENT_LCD_DISPLAY CALIBRATION_GCODE BAUD_RATE_GCODE \